_content/doc/code.html - website - Git at Google

 <!--{
 	"Title": "How to Write Go Code",
 	"Template": true
 }-->

 <h2 id="Introduction">Introduction</h2>

 <p>
 This document demonstrates the development of a simple Go package inside a
 module and introduces the <a href="/cmd/go/">go tool</a>, the standard way to
 fetch, build, and install Go modules, packages, and commands.
 </p>

 <p>
 Note: This document assumes that you are using Go 1.13 or later and the
 <code>GO111MODULE</code> environment variable is not set. If you are looking for
 the older, pre-modules version of this document, it is archived
 <a href="gopath_code.html">here</a>.
 </p>

 <h2 id="Organization">Code organization</h2>

 <p>
 Go programs are organized into packages. A <dfn>package</dfn> is a collection
 of source files in the same directory that are compiled together. Functions,
 types, variables, and constants defined in one source file are visible to all
 other source files within the same package.
 </p>

 <p>
 A repository contains one or more modules. A <dfn>module</dfn> is a collection
 of related Go packages that are released together. A Go repository typically
 contains only one module, located at the root of the repository. A file named
 <code>go.mod</code> there declares the <dfn>module path</dfn>: the import path
 prefix for all packages within the module. The module contains the packages in
 the directory containing its <code>go.mod</code> file as well as subdirectories
 of that directory, up to the next subdirectory containing another
 <code>go.mod</code> file (if any).
 </p>

 <p>
 Note that you don't need to publish your code to a remote repository before you
 can build it. A module can be defined locally without belonging to a repository.
 However, it's a good habit to organize your code as if you will publish it
 someday.
 </p>

 <p>
 Each module's path not only serves as an import path prefix for its packages,
 but also indicates where the <code>go</code> command should look to download it.
 For example, in order to download the module <code>golang.org/x/tools</code>,
 the <code>go</code> command would consult the repository indicated by
 <code>https://golang.org/x/tools</code> (described more <a href="/cmd/go/#hdr-Remote_import_paths">here</a>).
 </p>

 <p>
 An <dfn>import path</dfn> is a string used to import a package. A package's
 import path is its module path joined with its subdirectory within the module.
 For example, the module <code>github.com/google/go-cmp</code> contains a package
 in the directory <code>cmp/</code>. That package's import path is
 <code>github.com/google/go-cmp/cmp</code>. Packages in the standard library do
 not have a module path prefix.
 </p>

 <h2 id="Command">Your first program</h2>

 <p>
 To compile and run a simple program, first choose a module path (we'll use
 <code>example/user/hello</code>) and create a <code>go.mod</code> file that
 declares it:
 </p>

 <pre>
 $ mkdir hello # Alternatively, clone it if it already exists in version control.
 $ cd hello
 $ <b>go mod init example/user/hello</b>
 go: creating new go.mod: module example/user/hello
 $ cat go.mod
 module example/user/hello

 go 1.16
 $
 </pre>

 <p>
 The first statement in a Go source file must be
 <code>package <dfn>name</dfn></code>. Executable commands must always use
 <code>package main</code>.
 </p>

 <p>
 Next, create a file named <code>hello.go</code> inside that directory containing
 the following Go code:
 </p>

 <pre>
 package main

 import "fmt"

 func main() {
     fmt.Println("Hello, world.")
 }
 </pre>

 <p>
 Now you can build and install that program with the <code>go</code> tool:
 </p>

 <pre>
 $ <b>go install example/user/hello</b>
 $
 </pre>

 <p>
 This command builds the <code>hello</code> command, producing an executable
 binary. It then installs that binary as <code>$HOME/go/bin/hello</code> (or,
 under Windows, <code>%USERPROFILE%\go\bin\hello.exe</code>).
 </p>

 <p>
 The install directory is controlled by the <code>GOPATH</code>
 and <code>GOBIN</code> <a href="/cmd/go/#hdr-Environment_variables">environment
 variables</a>. If <code>GOBIN</code> is set, binaries are installed to that
 directory. If <code>GOPATH</code> is set, binaries are installed to
 the <code>bin</code> subdirectory of the first directory in
 the <code>GOPATH</code> list. Otherwise, binaries are installed to
 the <code>bin</code> subdirectory of the default <code>GOPATH</code>
 (<code>$HOME/go</code> or <code>%USERPROFILE%\go</code>).
 </p>

 <p>
 You can use the <code>go env</code> command to portably set the default value
 for an environment variable for future <code>go</code> commands:
 </p>

 <pre>
 $ go env -w GOBIN=/somewhere/else/bin
 $
 </pre>

 <p>
 To unset a variable previously set by <code>go env -w</code>, use <code>go env -u</code>:
 </p>

 <pre>
 $ go env -u GOBIN
 $
 </pre>

 <p>
 Commands like <code>go install</code> apply within the context of the module
 containing the current working directory. If the working directory is not within
 the <code>example/user/hello</code> module, <code>go install</code> may fail.
 </p>

 <p>
 For convenience, <code>go</code> commands accept paths relative
 to the working directory, and default to the package in the
 current working directory if no other path is given.
 So in our working directory, the following commands are all equivalent:
 </p>

 <pre>
 $ go install example/user/hello
 </pre>

 <pre>
 $ go install .
 </pre>

 <pre>
 $ go install
 </pre>

 <p>
 Next, let's run the program to ensure it works. For added convenience, we'll
 add the install directory to our <code>PATH</code> to make running binaries
 easy:
 </p>

 <!-- Note: we can't use $(go env GOBIN) here until https://golang.org/issue/23439 is addressed. -->
 <pre>
 # Windows users should consult https://github.com/golang/go/wiki/SettingGOPATH
 # for setting %PATH%.
 $ <b>export PATH=$PATH:$(dirname $(go list -f '{{"{{.Target}}"}}' .))</b>
 $ <b>hello</b>
 Hello, world.
 $
 </pre>

 <p>
 If you're using a source control system, now would be a good time to initialize
 a repository, add the files, and commit your first change. Again, this step is
 optional: you do not need to use source control to write Go code.
 </p>

 <pre>
 $ <b>git init</b>
 Initialized empty Git repository in /home/user/hello/.git/
 $ <b>git add go.mod hello.go</b>
 $ <b>git commit -m "initial commit"</b>
 [master (root-commit) 0b4507d] initial commit
  1 file changed, 7 insertion(+)
  create mode 100644 go.mod hello.go
 $
 </pre>

 <p>
 The <code>go</code> command locates the repository containing a given module path by requesting a corresponding HTTPS URL and reading metadata embedded in the HTML response (see
 <code><a href="/cmd/go/#hdr-Remote_import_paths">go help importpath</a></code>).
 Many hosting services already provide that metadata for repositories containing
 Go code, so the easiest way to make your module available for others to use is
 usually to make its module path match the URL for the repository.
 </p>

 <h3 id="ImportingLocal">Importing packages from your module</h3>

 <p>
 Let's write a <code>morestrings</code> package and use it from the <code>hello</code> program.
 First, create a directory for the package named
 <code>$HOME/hello/morestrings</code>, and then a file named
 <code>reverse.go</code> in that directory with the following contents:
 </p>

 <pre>
 // Package morestrings implements additional functions to manipulate UTF-8
 // encoded strings, beyond what is provided in the standard "strings" package.
 package morestrings

 // ReverseRunes returns its argument string reversed rune-wise left to right.
 func ReverseRunes(s string) string {
     r := []rune(s)
     for i, j := 0, len(r)-1; i &lt; len(r)/2; i, j = i+1, j-1 {
         r[i], r[j] = r[j], r[i]
     }
     return string(r)
 }
 </pre>

 <p>
 Because our <code>ReverseRunes</code> function begins with an upper-case
 letter, it is <a href="/ref/spec#Exported_identifiers"><dfn>exported</dfn></a>,
 and can be used in other packages that import our <code>morestrings</code>
 package.
 </p>

 <p>
 Let's test that the package compiles with <code>go build</code>:
 </p>

 <pre>
 $ cd $HOME/hello/morestrings
 $ <b>go build</b>
 $
 </pre>

 <p>
 This won't produce an output file. Instead it saves the compiled package in the
 local build cache.
 </p>

 <p>
 After confirming that the <code>morestrings</code> package builds, let's use it
 from the <code>hello</code> program. To do so, modify your original
 <code>$HOME/hello/hello.go</code> to use the morestrings package:
 </p>

 <pre>
 package main

 import (
     "fmt"

     <b>"example/user/hello/morestrings"</b>
 )

 func main() {
     fmt.Println(morestrings.ReverseRunes("!oG ,olleH"))
 }
 </pre>

 <p>
 Install the <code>hello</code> program:
 </p>

 <pre>
 $ <b>go install example/user/hello</b>
 </pre>

 <p>
 Running the new version of the program, you should see a new, reversed message:
 </p>

 <pre>
 $ <b>hello</b>
 Hello, Go!
 </pre>

 <h3 id="ImportingRemote">Importing packages from remote modules</h3>

 <p>
 An import path can describe how to obtain the package source code using a
 revision control system such as Git or Mercurial. The <code>go</code> tool uses
 this property to automatically fetch packages from remote repositories.
 For instance, to use <code>github.com/google/go-cmp/cmp</code> in your program:
 </p>

 <pre>
 package main

 import (
     "fmt"

     "example/user/hello/morestrings"
     "github.com/google/go-cmp/cmp"
 )

 func main() {
     fmt.Println(morestrings.ReverseRunes("!oG ,olleH"))
     fmt.Println(cmp.Diff("Hello World", "Hello Go"))
 }
 </pre>

 <p>
 Now that you have a dependency on an external module, you need to download that
 module and record its version in your <code>go.mod</code> file. The <code>go
 mod tidy</code> command adds missing module requirements for imported packages
 and removes requirements on modules that aren't used anymore.
 </p>

 <pre>
 $ go mod tidy
 go: finding module for package github.com/google/go-cmp/cmp
 go: found github.com/google/go-cmp/cmp in github.com/google/go-cmp v0.5.4
 $ go install example/user/hello
 $ hello
 Hello, Go!
   string(
 -     "Hello World",
 +     "Hello Go",
   )
 $ cat go.mod
 module example/user/hello

 go 1.16

 <b>require github.com/google/go-cmp v0.5.4</b>
 $
 </pre>

 <p>
 Module dependencies are automatically downloaded to the <code>pkg/mod</code>
 subdirectory of the directory indicated by the <code>GOPATH</code> environment
 variable. The downloaded contents for a given version of a module are shared
 among all other modules that <code>require</code> that version, so
 the <code>go</code> command marks those files and directories as read-only. To
 remove all downloaded modules, you can pass the <code>-modcache</code> flag
 to <code>go clean</code>:
 </p>

 <pre>
 $ go clean -modcache
 $
 </pre>

 <h2 id="Testing">Testing</h2>

 <p>
 Go has a lightweight test framework composed of the <code>go test</code>
 command and the <code>testing</code> package.
 </p>

 <p>
 You write a test by creating a file with a name ending in <code>_test.go</code>
 that contains functions named <code>TestXXX</code> with signature
 <code>func (t *testing.T)</code>.
 The test framework runs each such function;
 if the function calls a failure function such as <code>t.Error</code> or
 <code>t.Fail</code>, the test is considered to have failed.
 </p>

 <p>
 Add a test to the <code>morestrings</code> package by creating the file
 <code>$HOME/hello/morestrings/reverse_test.go</code> containing
 the following Go code.
 </p>

 <pre>
 package morestrings

 import "testing"

 func TestReverseRunes(t *testing.T) {
     cases := []struct {
         in, want string
     }{
         {"Hello, world", "dlrow ,olleH"},
         {"Hello, 世界", "界世 ,olleH"},
         {"", ""},
     }
     for _, c := range cases {
         got := ReverseRunes(c.in)
         if got != c.want {
             t.Errorf("ReverseRunes(%q) == %q, want %q", c.in, got, c.want)
         }
     }
 }
 </pre>

 <p>
 Then run the test with <code>go test</code>:
 </p>

 <pre>
 $ cd $HOME/hello/morestrings
 $ <b>go test</b>
 PASS
 ok  	example/user/hello/morestrings 0.165s
 $
 </pre>

 <p>
 Run <code><a href="/cmd/go/#hdr-Test_packages">go help test</a></code> and see the
 <a href="/pkg/testing/">testing package documentation</a> for more detail.
 </p>

 <h2 id="next">What's next</h2>

 <p>
 Subscribe to the
 <a href="https://groups.google.com/group/golang-announce">golang-announce</a>
 mailing list to be notified when a new stable version of Go is released.
 </p>

 <p>
 See <a href="/doc/effective_go.html">Effective Go</a> for tips on writing
 clear, idiomatic Go code.
 </p>

 <p>
 Take
 <a href="/tour/">A Tour of Go</a>
 to learn the language proper.
 </p>

 <p>
 Visit the <a href="/doc/#articles">documentation page</a> for a set of in-depth
 articles about the Go language and its libraries and tools.
 </p>

 <h2 id="help">Getting help</h2>

 <p>
 For real-time help, ask the helpful gophers in the community-run
 <a href="https://gophers.slack.com/messages/general/">gophers Slack server</a>
 (grab an invite <a href="https://invite.slack.golangbridge.org/">here</a>).
 </p>

 <p>
 The official mailing list for discussion of the Go language is
 <a href="https://groups.google.com/group/golang-nuts">Go Nuts</a>.
 </p>

 <p>
 Report bugs using the
 <a href="/issue">Go issue tracker</a>.
 </p>
	<!--{
	"Title": "How to Write Go Code",
	"Template": true
	}-->

	<h2 id="Introduction">Introduction</h2>

	<p>
	This document demonstrates the development of a simple Go package inside a
	module and introduces the <a href="/cmd/go/">go tool</a>, the standard way to
	fetch, build, and install Go modules, packages, and commands.
	</p>

	<p>
	Note: This document assumes that you are using Go 1.13 or later and the
	<code>GO111MODULE</code> environment variable is not set. If you are looking for
	the older, pre-modules version of this document, it is archived
	<a href="gopath_code.html">here</a>.
	</p>

	<h2 id="Organization">Code organization</h2>

	<p>
	Go programs are organized into packages. A <dfn>package</dfn> is a collection
	of source files in the same directory that are compiled together. Functions,
	types, variables, and constants defined in one source file are visible to all
	other source files within the same package.
	</p>

	<p>
	A repository contains one or more modules. A <dfn>module</dfn> is a collection
	of related Go packages that are released together. A Go repository typically
	contains only one module, located at the root of the repository. A file named
	<code>go.mod</code> there declares the <dfn>module path</dfn>: the import path
	prefix for all packages within the module. The module contains the packages in
	the directory containing its <code>go.mod</code> file as well as subdirectories
	of that directory, up to the next subdirectory containing another
	<code>go.mod</code> file (if any).
	</p>

	<p>
	Note that you don't need to publish your code to a remote repository before you
	can build it. A module can be defined locally without belonging to a repository.
	However, it's a good habit to organize your code as if you will publish it
	someday.
	</p>

	<p>
	Each module's path not only serves as an import path prefix for its packages,
	but also indicates where the <code>go</code> command should look to download it.
	For example, in order to download the module <code>golang.org/x/tools</code>,
	the <code>go</code> command would consult the repository indicated by
	<code>https://golang.org/x/tools</code> (described more <a href="/cmd/go/#hdr-Remote_import_paths">here</a>).
	</p>

	<p>
	An <dfn>import path</dfn> is a string used to import a package. A package's
	import path is its module path joined with its subdirectory within the module.
	For example, the module <code>github.com/google/go-cmp</code> contains a package
	in the directory <code>cmp/</code>. That package's import path is
	<code>github.com/google/go-cmp/cmp</code>. Packages in the standard library do
	not have a module path prefix.
	</p>

	<h2 id="Command">Your first program</h2>

	<p>
	To compile and run a simple program, first choose a module path (we'll use
	<code>example/user/hello</code>) and create a <code>go.mod</code> file that
	declares it:
	</p>

	<pre>
	$ mkdir hello # Alternatively, clone it if it already exists in version control.
	$ cd hello
	$ <b>go mod init example/user/hello</b>
	go: creating new go.mod: module example/user/hello
	$ cat go.mod
	module example/user/hello

	go 1.16
	$
	</pre>

	<p>
	The first statement in a Go source file must be
	<code>package <dfn>name</dfn></code>. Executable commands must always use
	<code>package main</code>.
	</p>

	<p>
	Next, create a file named <code>hello.go</code> inside that directory containing
	the following Go code:
	</p>

	<pre>
	package main

	import "fmt"

	func main() {
	fmt.Println("Hello, world.")
	}
	</pre>

	<p>
	Now you can build and install that program with the <code>go</code> tool:
	</p>

	<pre>
	$ <b>go install example/user/hello</b>
	$
	</pre>

	<p>
	This command builds the <code>hello</code> command, producing an executable
	binary. It then installs that binary as <code>$HOME/go/bin/hello</code> (or,
	under Windows, <code>%USERPROFILE%\go\bin\hello.exe</code>).
	</p>

	<p>
	The install directory is controlled by the <code>GOPATH</code>
	and <code>GOBIN</code> <a href="/cmd/go/#hdr-Environment_variables">environment
	variables</a>. If <code>GOBIN</code> is set, binaries are installed to that
	directory. If <code>GOPATH</code> is set, binaries are installed to
	the <code>bin</code> subdirectory of the first directory in
	the <code>GOPATH</code> list. Otherwise, binaries are installed to
	the <code>bin</code> subdirectory of the default <code>GOPATH</code>
	(<code>$HOME/go</code> or <code>%USERPROFILE%\go</code>).
	</p>

	<p>
	You can use the <code>go env</code> command to portably set the default value
	for an environment variable for future <code>go</code> commands:
	</p>

	<pre>
	$ go env -w GOBIN=/somewhere/else/bin
	$
	</pre>

	<p>
	To unset a variable previously set by <code>go env -w</code>, use <code>go env -u</code>:
	</p>

	<pre>
	$ go env -u GOBIN
	$
	</pre>

	<p>
	Commands like <code>go install</code> apply within the context of the module
	containing the current working directory. If the working directory is not within
	the <code>example/user/hello</code> module, <code>go install</code> may fail.
	</p>

	<p>
	For convenience, <code>go</code> commands accept paths relative
	to the working directory, and default to the package in the
	current working directory if no other path is given.
	So in our working directory, the following commands are all equivalent:
	</p>

	<pre>
	$ go install example/user/hello
	</pre>

	<pre>
	$ go install .
	</pre>

	<pre>
	$ go install
	</pre>

	<p>
	Next, let's run the program to ensure it works. For added convenience, we'll
	add the install directory to our <code>PATH</code> to make running binaries
	easy:
	</p>

	<!-- Note: we can't use $(go env GOBIN) here until https://golang.org/issue/23439 is addressed. -->
	<pre>
	# Windows users should consult https://github.com/golang/go/wiki/SettingGOPATH
	# for setting %PATH%.
	$ <b>export PATH=$PATH:$(dirname $(go list -f '{{"{{.Target}}"}}' .))</b>
	$ <b>hello</b>
	Hello, world.
	$
	</pre>

	<p>
	If you're using a source control system, now would be a good time to initialize
	a repository, add the files, and commit your first change. Again, this step is
	optional: you do not need to use source control to write Go code.
	</p>

	<pre>
	$ <b>git init</b>
	Initialized empty Git repository in /home/user/hello/.git/
	$ <b>git add go.mod hello.go</b>
	$ <b>git commit -m "initial commit"</b>
	[master (root-commit) 0b4507d] initial commit
	1 file changed, 7 insertion(+)
	create mode 100644 go.mod hello.go
	$
	</pre>

	<p>
	The <code>go</code> command locates the repository containing a given module path by requesting a corresponding HTTPS URL and reading metadata embedded in the HTML response (see
	<code><a href="/cmd/go/#hdr-Remote_import_paths">go help importpath</a></code>).
	Many hosting services already provide that metadata for repositories containing
	Go code, so the easiest way to make your module available for others to use is
	usually to make its module path match the URL for the repository.
	</p>

	<h3 id="ImportingLocal">Importing packages from your module</h3>

	<p>
	Let's write a <code>morestrings</code> package and use it from the <code>hello</code> program.
	First, create a directory for the package named
	<code>$HOME/hello/morestrings</code>, and then a file named
	<code>reverse.go</code> in that directory with the following contents:
	</p>

	<pre>
	// Package morestrings implements additional functions to manipulate UTF-8
	// encoded strings, beyond what is provided in the standard "strings" package.
	package morestrings

	// ReverseRunes returns its argument string reversed rune-wise left to right.
	func ReverseRunes(s string) string {
	r := []rune(s)
	for i, j := 0, len(r)-1; i < len(r)/2; i, j = i+1, j-1 {
	r[i], r[j] = r[j], r[i]
	}
	return string(r)
	}
	</pre>

	<p>
	Because our <code>ReverseRunes</code> function begins with an upper-case
	letter, it is <a href="/ref/spec#Exported_identifiers"><dfn>exported</dfn></a>,
	and can be used in other packages that import our <code>morestrings</code>
	package.
	</p>

	<p>
	Let's test that the package compiles with <code>go build</code>:
	</p>

	<pre>
	$ cd $HOME/hello/morestrings
	$ <b>go build</b>
	$
	</pre>

	<p>
	This won't produce an output file. Instead it saves the compiled package in the
	local build cache.
	</p>

	<p>
	After confirming that the <code>morestrings</code> package builds, let's use it
	from the <code>hello</code> program. To do so, modify your original
	<code>$HOME/hello/hello.go</code> to use the morestrings package:
	</p>

	<pre>
	package main

	import (
	"fmt"

	<b>"example/user/hello/morestrings"</b>
	)

	func main() {
	fmt.Println(morestrings.ReverseRunes("!oG ,olleH"))
	}
	</pre>

	<p>
	Install the <code>hello</code> program:
	</p>

	<pre>
	$ <b>go install example/user/hello</b>
	</pre>

	<p>
	Running the new version of the program, you should see a new, reversed message:
	</p>

	<pre>
	$ <b>hello</b>
	Hello, Go!
	</pre>

	<h3 id="ImportingRemote">Importing packages from remote modules</h3>

	<p>
	An import path can describe how to obtain the package source code using a
	revision control system such as Git or Mercurial. The <code>go</code> tool uses
	this property to automatically fetch packages from remote repositories.
	For instance, to use <code>github.com/google/go-cmp/cmp</code> in your program:
	</p>

	<pre>
	package main

	import (
	"fmt"

	"example/user/hello/morestrings"
	"github.com/google/go-cmp/cmp"
	)

	func main() {
	fmt.Println(morestrings.ReverseRunes("!oG ,olleH"))
	fmt.Println(cmp.Diff("Hello World", "Hello Go"))
	}
	</pre>

	<p>
	Now that you have a dependency on an external module, you need to download that
	module and record its version in your <code>go.mod</code> file. The <code>go
	mod tidy</code> command adds missing module requirements for imported packages
	and removes requirements on modules that aren't used anymore.
	</p>

	<pre>
	$ go mod tidy
	go: finding module for package github.com/google/go-cmp/cmp
	go: found github.com/google/go-cmp/cmp in github.com/google/go-cmp v0.5.4
	$ go install example/user/hello
	$ hello
	Hello, Go!
	string(
	- "Hello World",
	+ "Hello Go",
	)
	$ cat go.mod
	module example/user/hello

	go 1.16

	<b>require github.com/google/go-cmp v0.5.4</b>
	$
	</pre>

	<p>
	Module dependencies are automatically downloaded to the <code>pkg/mod</code>
	subdirectory of the directory indicated by the <code>GOPATH</code> environment
	variable. The downloaded contents for a given version of a module are shared
	among all other modules that <code>require</code> that version, so
	the <code>go</code> command marks those files and directories as read-only. To
	remove all downloaded modules, you can pass the <code>-modcache</code> flag
	to <code>go clean</code>:
	</p>

	<pre>
	$ go clean -modcache
	$
	</pre>

	<h2 id="Testing">Testing</h2>

	<p>
	Go has a lightweight test framework composed of the <code>go test</code>
	command and the <code>testing</code> package.
	</p>

	<p>
	You write a test by creating a file with a name ending in <code>_test.go</code>
	that contains functions named <code>TestXXX</code> with signature
	<code>func (t *testing.T)</code>.
	The test framework runs each such function;
	if the function calls a failure function such as <code>t.Error</code> or
	<code>t.Fail</code>, the test is considered to have failed.
	</p>

	<p>
	Add a test to the <code>morestrings</code> package by creating the file
	<code>$HOME/hello/morestrings/reverse_test.go</code> containing
	the following Go code.
	</p>

	<pre>
	package morestrings

	import "testing"

	func TestReverseRunes(t *testing.T) {
	cases := []struct {
	in, want string
	}{
	{"Hello, world", "dlrow ,olleH"},
	{"Hello, 世界", "界世 ,olleH"},
	{"", ""},
	}
	for _, c := range cases {
	got := ReverseRunes(c.in)
	if got != c.want {
	t.Errorf("ReverseRunes(%q) == %q, want %q", c.in, got, c.want)
	}
	}
	}
	</pre>

	<p>
	Then run the test with <code>go test</code>:
	</p>

	<pre>
	$ cd $HOME/hello/morestrings
	$ <b>go test</b>
	PASS
	ok example/user/hello/morestrings 0.165s
	$
	</pre>

	<p>
	Run <code><a href="/cmd/go/#hdr-Test_packages">go help test</a></code> and see the
	<a href="/pkg/testing/">testing package documentation</a> for more detail.
	</p>

	<h2 id="next">What's next</h2>

	<p>
	Subscribe to the
	<a href="https://groups.google.com/group/golang-announce">golang-announce</a>
	mailing list to be notified when a new stable version of Go is released.
	</p>

	<p>
	See <a href="/doc/effective_go.html">Effective Go</a> for tips on writing
	clear, idiomatic Go code.
	</p>

	<p>
	Take
	<a href="/tour/">A Tour of Go</a>
	to learn the language proper.
	</p>

	<p>
	Visit the <a href="/doc/#articles">documentation page</a> for a set of in-depth
	articles about the Go language and its libraries and tools.
	</p>

	<h2 id="help">Getting help</h2>

	<p>
	For real-time help, ask the helpful gophers in the community-run
	<a href="https://gophers.slack.com/messages/general/">gophers Slack server</a>
	(grab an invite <a href="https://invite.slack.golangbridge.org/">here</a>).
	</p>

	<p>
	The official mailing list for discussion of the Go language is
	<a href="https://groups.google.com/group/golang-nuts">Go Nuts</a>.
	</p>

	<p>
	Report bugs using the
	<a href="/issue">Go issue tracker</a>.
	</p>