blob: 9b126ea3d4481aedc75e1553d3a2daf1d499d92d [file] [log] [blame]
// Copyright 2015 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Transport code.
package http2
import (
"bufio"
"bytes"
"compress/gzip"
"context"
"crypto/rand"
"crypto/tls"
"errors"
"fmt"
"io"
"io/ioutil"
"log"
"math"
mathrand "math/rand"
"net"
"net/http"
"net/http/httptrace"
"net/textproto"
"sort"
"strconv"
"strings"
"sync"
"sync/atomic"
"time"
"golang.org/x/net/http/httpguts"
"golang.org/x/net/http2/hpack"
"golang.org/x/net/idna"
)
const (
// transportDefaultConnFlow is how many connection-level flow control
// tokens we give the server at start-up, past the default 64k.
transportDefaultConnFlow = 1 << 30
// transportDefaultStreamFlow is how many stream-level flow
// control tokens we announce to the peer, and how many bytes
// we buffer per stream.
transportDefaultStreamFlow = 4 << 20
// transportDefaultStreamMinRefresh is the minimum number of bytes we'll send
// a stream-level WINDOW_UPDATE for at a time.
transportDefaultStreamMinRefresh = 4 << 10
defaultUserAgent = "Go-http-client/2.0"
// initialMaxConcurrentStreams is a connections maxConcurrentStreams until
// it's received servers initial SETTINGS frame, which corresponds with the
// spec's minimum recommended value.
initialMaxConcurrentStreams = 100
// defaultMaxConcurrentStreams is a connections default maxConcurrentStreams
// if the server doesn't include one in its initial SETTINGS frame.
defaultMaxConcurrentStreams = 1000
)
// Transport is an HTTP/2 Transport.
//
// A Transport internally caches connections to servers. It is safe
// for concurrent use by multiple goroutines.
type Transport struct {
// DialTLS specifies an optional dial function for creating
// TLS connections for requests.
//
// If DialTLS is nil, tls.Dial is used.
//
// If the returned net.Conn has a ConnectionState method like tls.Conn,
// it will be used to set http.Response.TLS.
DialTLS func(network, addr string, cfg *tls.Config) (net.Conn, error)
// TLSClientConfig specifies the TLS configuration to use with
// tls.Client. If nil, the default configuration is used.
TLSClientConfig *tls.Config
// ConnPool optionally specifies an alternate connection pool to use.
// If nil, the default is used.
ConnPool ClientConnPool
// DisableCompression, if true, prevents the Transport from
// requesting compression with an "Accept-Encoding: gzip"
// request header when the Request contains no existing
// Accept-Encoding value. If the Transport requests gzip on
// its own and gets a gzipped response, it's transparently
// decoded in the Response.Body. However, if the user
// explicitly requested gzip it is not automatically
// uncompressed.
DisableCompression bool
// AllowHTTP, if true, permits HTTP/2 requests using the insecure,
// plain-text "http" scheme. Note that this does not enable h2c support.
AllowHTTP bool
// MaxHeaderListSize is the http2 SETTINGS_MAX_HEADER_LIST_SIZE to
// send in the initial settings frame. It is how many bytes
// of response headers are allowed. Unlike the http2 spec, zero here
// means to use a default limit (currently 10MB). If you actually
// want to advertise an unlimited value to the peer, Transport
// interprets the highest possible value here (0xffffffff or 1<<32-1)
// to mean no limit.
MaxHeaderListSize uint32
// StrictMaxConcurrentStreams controls whether the server's
// SETTINGS_MAX_CONCURRENT_STREAMS should be respected
// globally. If false, new TCP connections are created to the
// server as needed to keep each under the per-connection
// SETTINGS_MAX_CONCURRENT_STREAMS limit. If true, the
// server's SETTINGS_MAX_CONCURRENT_STREAMS is interpreted as
// a global limit and callers of RoundTrip block when needed,
// waiting for their turn.
StrictMaxConcurrentStreams bool
// ReadIdleTimeout is the timeout after which a health check using ping
// frame will be carried out if no frame is received on the connection.
// Note that a ping response will is considered a received frame, so if
// there is no other traffic on the connection, the health check will
// be performed every ReadIdleTimeout interval.
// If zero, no health check is performed.
ReadIdleTimeout time.Duration
// PingTimeout is the timeout after which the connection will be closed
// if a response to Ping is not received.
// Defaults to 15s.
PingTimeout time.Duration
// CountError, if non-nil, is called on HTTP/2 transport errors.
// It's intended to increment a metric for monitoring, such
// as an expvar or Prometheus metric.
// The errType consists of only ASCII word characters.
CountError func(errType string)
// t1, if non-nil, is the standard library Transport using
// this transport. Its settings are used (but not its
// RoundTrip method, etc).
t1 *http.Transport
connPoolOnce sync.Once
connPoolOrDef ClientConnPool // non-nil version of ConnPool
}
func (t *Transport) maxHeaderListSize() uint32 {
if t.MaxHeaderListSize == 0 {
return 10 << 20
}
if t.MaxHeaderListSize == 0xffffffff {
return 0
}
return t.MaxHeaderListSize
}
func (t *Transport) disableCompression() bool {
return t.DisableCompression || (t.t1 != nil && t.t1.DisableCompression)
}
func (t *Transport) pingTimeout() time.Duration {
if t.PingTimeout == 0 {
return 15 * time.Second
}
return t.PingTimeout
}
// ConfigureTransport configures a net/http HTTP/1 Transport to use HTTP/2.
// It returns an error if t1 has already been HTTP/2-enabled.
//
// Use ConfigureTransports instead to configure the HTTP/2 Transport.
func ConfigureTransport(t1 *http.Transport) error {
_, err := ConfigureTransports(t1)
return err
}
// ConfigureTransports configures a net/http HTTP/1 Transport to use HTTP/2.
// It returns a new HTTP/2 Transport for further configuration.
// It returns an error if t1 has already been HTTP/2-enabled.
func ConfigureTransports(t1 *http.Transport) (*Transport, error) {
return configureTransports(t1)
}
func configureTransports(t1 *http.Transport) (*Transport, error) {
connPool := new(clientConnPool)
t2 := &Transport{
ConnPool: noDialClientConnPool{connPool},
t1: t1,
}
connPool.t = t2
if err := registerHTTPSProtocol(t1, noDialH2RoundTripper{t2}); err != nil {
return nil, err
}
if t1.TLSClientConfig == nil {
t1.TLSClientConfig = new(tls.Config)
}
if !strSliceContains(t1.TLSClientConfig.NextProtos, "h2") {
t1.TLSClientConfig.NextProtos = append([]string{"h2"}, t1.TLSClientConfig.NextProtos...)
}
if !strSliceContains(t1.TLSClientConfig.NextProtos, "http/1.1") {
t1.TLSClientConfig.NextProtos = append(t1.TLSClientConfig.NextProtos, "http/1.1")
}
upgradeFn := func(authority string, c *tls.Conn) http.RoundTripper {
addr := authorityAddr("https", authority)
if used, err := connPool.addConnIfNeeded(addr, t2, c); err != nil {
go c.Close()
return erringRoundTripper{err}
} else if !used {
// Turns out we don't need this c.
// For example, two goroutines made requests to the same host
// at the same time, both kicking off TCP dials. (since protocol
// was unknown)
go c.Close()
}
return t2
}
if m := t1.TLSNextProto; len(m) == 0 {
t1.TLSNextProto = map[string]func(string, *tls.Conn) http.RoundTripper{
"h2": upgradeFn,
}
} else {
m["h2"] = upgradeFn
}
return t2, nil
}
func (t *Transport) connPool() ClientConnPool {
t.connPoolOnce.Do(t.initConnPool)
return t.connPoolOrDef
}
func (t *Transport) initConnPool() {
if t.ConnPool != nil {
t.connPoolOrDef = t.ConnPool
} else {
t.connPoolOrDef = &clientConnPool{t: t}
}
}
// ClientConn is the state of a single HTTP/2 client connection to an
// HTTP/2 server.
type ClientConn struct {
t *Transport
tconn net.Conn // usually *tls.Conn, except specialized impls
tlsState *tls.ConnectionState // nil only for specialized impls
reused uint32 // whether conn is being reused; atomic
singleUse bool // whether being used for a single http.Request
getConnCalled bool // used by clientConnPool
// readLoop goroutine fields:
readerDone chan struct{} // closed on error
readerErr error // set before readerDone is closed
idleTimeout time.Duration // or 0 for never
idleTimer *time.Timer
mu sync.Mutex // guards following
cond *sync.Cond // hold mu; broadcast on flow/closed changes
flow flow // our conn-level flow control quota (cs.flow is per stream)
inflow flow // peer's conn-level flow control
doNotReuse bool // whether conn is marked to not be reused for any future requests
closing bool
closed bool
seenSettings bool // true if we've seen a settings frame, false otherwise
wantSettingsAck bool // we sent a SETTINGS frame and haven't heard back
goAway *GoAwayFrame // if non-nil, the GoAwayFrame we received
goAwayDebug string // goAway frame's debug data, retained as a string
streams map[uint32]*clientStream // client-initiated
streamsReserved int // incr by ReserveNewRequest; decr on RoundTrip
nextStreamID uint32
pendingRequests int // requests blocked and waiting to be sent because len(streams) == maxConcurrentStreams
pings map[[8]byte]chan struct{} // in flight ping data to notification channel
br *bufio.Reader
lastActive time.Time
lastIdle time.Time // time last idle
// Settings from peer: (also guarded by wmu)
maxFrameSize uint32
maxConcurrentStreams uint32
peerMaxHeaderListSize uint64
initialWindowSize uint32
// reqHeaderMu is a 1-element semaphore channel controlling access to sending new requests.
// Write to reqHeaderMu to lock it, read from it to unlock.
// Lock reqmu BEFORE mu or wmu.
reqHeaderMu chan struct{}
// wmu is held while writing.
// Acquire BEFORE mu when holding both, to avoid blocking mu on network writes.
// Only acquire both at the same time when changing peer settings.
wmu sync.Mutex
bw *bufio.Writer
fr *Framer
werr error // first write error that has occurred
hbuf bytes.Buffer // HPACK encoder writes into this
henc *hpack.Encoder
}
// clientStream is the state for a single HTTP/2 stream. One of these
// is created for each Transport.RoundTrip call.
type clientStream struct {
cc *ClientConn
// Fields of Request that we may access even after the response body is closed.
ctx context.Context
reqCancel <-chan struct{}
trace *httptrace.ClientTrace // or nil
ID uint32
bufPipe pipe // buffered pipe with the flow-controlled response payload
requestedGzip bool
isHead bool
abortOnce sync.Once
abort chan struct{} // closed to signal stream should end immediately
abortErr error // set if abort is closed
peerClosed chan struct{} // closed when the peer sends an END_STREAM flag
donec chan struct{} // closed after the stream is in the closed state
on100 chan struct{} // buffered; written to if a 100 is received
respHeaderRecv chan struct{} // closed when headers are received
res *http.Response // set if respHeaderRecv is closed
flow flow // guarded by cc.mu
inflow flow // guarded by cc.mu
bytesRemain int64 // -1 means unknown; owned by transportResponseBody.Read
readErr error // sticky read error; owned by transportResponseBody.Read
reqBody io.ReadCloser
reqBodyContentLength int64 // -1 means unknown
reqBodyClosed bool // body has been closed; guarded by cc.mu
// owned by writeRequest:
sentEndStream bool // sent an END_STREAM flag to the peer
sentHeaders bool
// owned by clientConnReadLoop:
firstByte bool // got the first response byte
pastHeaders bool // got first MetaHeadersFrame (actual headers)
pastTrailers bool // got optional second MetaHeadersFrame (trailers)
num1xx uint8 // number of 1xx responses seen
readClosed bool // peer sent an END_STREAM flag
readAborted bool // read loop reset the stream
trailer http.Header // accumulated trailers
resTrailer *http.Header // client's Response.Trailer
}
var got1xxFuncForTests func(int, textproto.MIMEHeader) error
// get1xxTraceFunc returns the value of request's httptrace.ClientTrace.Got1xxResponse func,
// if any. It returns nil if not set or if the Go version is too old.
func (cs *clientStream) get1xxTraceFunc() func(int, textproto.MIMEHeader) error {
if fn := got1xxFuncForTests; fn != nil {
return fn
}
return traceGot1xxResponseFunc(cs.trace)
}
func (cs *clientStream) abortStream(err error) {
cs.cc.mu.Lock()
defer cs.cc.mu.Unlock()
cs.abortStreamLocked(err)
}
func (cs *clientStream) abortStreamLocked(err error) {
cs.abortOnce.Do(func() {
cs.abortErr = err
close(cs.abort)
})
if cs.reqBody != nil && !cs.reqBodyClosed {
cs.reqBody.Close()
cs.reqBodyClosed = true
}
// TODO(dneil): Clean up tests where cs.cc.cond is nil.
if cs.cc.cond != nil {
// Wake up writeRequestBody if it is waiting on flow control.
cs.cc.cond.Broadcast()
}
}
func (cs *clientStream) abortRequestBodyWrite() {
cc := cs.cc
cc.mu.Lock()
defer cc.mu.Unlock()
if cs.reqBody != nil && !cs.reqBodyClosed {
cs.reqBody.Close()
cs.reqBodyClosed = true
cc.cond.Broadcast()
}
}
type stickyErrWriter struct {
w io.Writer
err *error
}
func (sew stickyErrWriter) Write(p []byte) (n int, err error) {
if *sew.err != nil {
return 0, *sew.err
}
n, err = sew.w.Write(p)
*sew.err = err
return
}
// noCachedConnError is the concrete type of ErrNoCachedConn, which
// needs to be detected by net/http regardless of whether it's its
// bundled version (in h2_bundle.go with a rewritten type name) or
// from a user's x/net/http2. As such, as it has a unique method name
// (IsHTTP2NoCachedConnError) that net/http sniffs for via func
// isNoCachedConnError.
type noCachedConnError struct{}
func (noCachedConnError) IsHTTP2NoCachedConnError() {}
func (noCachedConnError) Error() string { return "http2: no cached connection was available" }
// isNoCachedConnError reports whether err is of type noCachedConnError
// or its equivalent renamed type in net/http2's h2_bundle.go. Both types
// may coexist in the same running program.
func isNoCachedConnError(err error) bool {
_, ok := err.(interface{ IsHTTP2NoCachedConnError() })
return ok
}
var ErrNoCachedConn error = noCachedConnError{}
// RoundTripOpt are options for the Transport.RoundTripOpt method.
type RoundTripOpt struct {
// OnlyCachedConn controls whether RoundTripOpt may
// create a new TCP connection. If set true and
// no cached connection is available, RoundTripOpt
// will return ErrNoCachedConn.
OnlyCachedConn bool
}
func (t *Transport) RoundTrip(req *http.Request) (*http.Response, error) {
return t.RoundTripOpt(req, RoundTripOpt{})
}
// authorityAddr returns a given authority (a host/IP, or host:port / ip:port)
// and returns a host:port. The port 443 is added if needed.
func authorityAddr(scheme string, authority string) (addr string) {
host, port, err := net.SplitHostPort(authority)
if err != nil { // authority didn't have a port
port = "443"
if scheme == "http" {
port = "80"
}
host = authority
}
if a, err := idna.ToASCII(host); err == nil {
host = a
}
// IPv6 address literal, without a port:
if strings.HasPrefix(host, "[") && strings.HasSuffix(host, "]") {
return host + ":" + port
}
return net.JoinHostPort(host, port)
}
// RoundTripOpt is like RoundTrip, but takes options.
func (t *Transport) RoundTripOpt(req *http.Request, opt RoundTripOpt) (*http.Response, error) {
if !(req.URL.Scheme == "https" || (req.URL.Scheme == "http" && t.AllowHTTP)) {
return nil, errors.New("http2: unsupported scheme")
}
addr := authorityAddr(req.URL.Scheme, req.URL.Host)
for retry := 0; ; retry++ {
cc, err := t.connPool().GetClientConn(req, addr)
if err != nil {
t.vlogf("http2: Transport failed to get client conn for %s: %v", addr, err)
return nil, err
}
reused := !atomic.CompareAndSwapUint32(&cc.reused, 0, 1)
traceGotConn(req, cc, reused)
res, err := cc.RoundTrip(req)
if err != nil && retry <= 6 {
if req, err = shouldRetryRequest(req, err); err == nil {
// After the first retry, do exponential backoff with 10% jitter.
if retry == 0 {
continue
}
backoff := float64(uint(1) << (uint(retry) - 1))
backoff += backoff * (0.1 * mathrand.Float64())
select {
case <-time.After(time.Second * time.Duration(backoff)):
continue
case <-req.Context().Done():
err = req.Context().Err()
}
}
}
if err != nil {
t.vlogf("RoundTrip failure: %v", err)
return nil, err
}
return res, nil
}
}
// CloseIdleConnections closes any connections which were previously
// connected from previous requests but are now sitting idle.
// It does not interrupt any connections currently in use.
func (t *Transport) CloseIdleConnections() {
if cp, ok := t.connPool().(clientConnPoolIdleCloser); ok {
cp.closeIdleConnections()
}
}
var (
errClientConnClosed = errors.New("http2: client conn is closed")
errClientConnUnusable = errors.New("http2: client conn not usable")
errClientConnGotGoAway = errors.New("http2: Transport received Server's graceful shutdown GOAWAY")
)
// shouldRetryRequest is called by RoundTrip when a request fails to get
// response headers. It is always called with a non-nil error.
// It returns either a request to retry (either the same request, or a
// modified clone), or an error if the request can't be replayed.
func shouldRetryRequest(req *http.Request, err error) (*http.Request, error) {
if !canRetryError(err) {
return nil, err
}
// If the Body is nil (or http.NoBody), it's safe to reuse
// this request and its Body.
if req.Body == nil || req.Body == http.NoBody {
return req, nil
}
// If the request body can be reset back to its original
// state via the optional req.GetBody, do that.
if req.GetBody != nil {
body, err := req.GetBody()
if err != nil {
return nil, err
}
newReq := *req
newReq.Body = body
return &newReq, nil
}
// The Request.Body can't reset back to the beginning, but we
// don't seem to have started to read from it yet, so reuse
// the request directly.
if err == errClientConnUnusable {
return req, nil
}
return nil, fmt.Errorf("http2: Transport: cannot retry err [%v] after Request.Body was written; define Request.GetBody to avoid this error", err)
}
func canRetryError(err error) bool {
if err == errClientConnUnusable || err == errClientConnGotGoAway {
return true
}
if se, ok := err.(StreamError); ok {
if se.Code == ErrCodeProtocol && se.Cause == errFromPeer {
// See golang/go#47635, golang/go#42777
return true
}
return se.Code == ErrCodeRefusedStream
}
return false
}
func (t *Transport) dialClientConn(ctx context.Context, addr string, singleUse bool) (*ClientConn, error) {
host, _, err := net.SplitHostPort(addr)
if err != nil {
return nil, err
}
tconn, err := t.dialTLS(ctx)("tcp", addr, t.newTLSConfig(host))
if err != nil {
return nil, err
}
return t.newClientConn(tconn, singleUse)
}
func (t *Transport) newTLSConfig(host string) *tls.Config {
cfg := new(tls.Config)
if t.TLSClientConfig != nil {
*cfg = *t.TLSClientConfig.Clone()
}
if !strSliceContains(cfg.NextProtos, NextProtoTLS) {
cfg.NextProtos = append([]string{NextProtoTLS}, cfg.NextProtos...)
}
if cfg.ServerName == "" {
cfg.ServerName = host
}
return cfg
}
func (t *Transport) dialTLS(ctx context.Context) func(string, string, *tls.Config) (net.Conn, error) {
if t.DialTLS != nil {
return t.DialTLS
}
return func(network, addr string, cfg *tls.Config) (net.Conn, error) {
tlsCn, err := t.dialTLSWithContext(ctx, network, addr, cfg)
if err != nil {
return nil, err
}
state := tlsCn.ConnectionState()
if p := state.NegotiatedProtocol; p != NextProtoTLS {
return nil, fmt.Errorf("http2: unexpected ALPN protocol %q; want %q", p, NextProtoTLS)
}
if !state.NegotiatedProtocolIsMutual {
return nil, errors.New("http2: could not negotiate protocol mutually")
}
return tlsCn, nil
}
}
// disableKeepAlives reports whether connections should be closed as
// soon as possible after handling the first request.
func (t *Transport) disableKeepAlives() bool {
return t.t1 != nil && t.t1.DisableKeepAlives
}
func (t *Transport) expectContinueTimeout() time.Duration {
if t.t1 == nil {
return 0
}
return t.t1.ExpectContinueTimeout
}
func (t *Transport) NewClientConn(c net.Conn) (*ClientConn, error) {
return t.newClientConn(c, t.disableKeepAlives())
}
func (t *Transport) newClientConn(c net.Conn, singleUse bool) (*ClientConn, error) {
cc := &ClientConn{
t: t,
tconn: c,
readerDone: make(chan struct{}),
nextStreamID: 1,
maxFrameSize: 16 << 10, // spec default
initialWindowSize: 65535, // spec default
maxConcurrentStreams: initialMaxConcurrentStreams, // "infinite", per spec. Use a smaller value until we have received server settings.
peerMaxHeaderListSize: 0xffffffffffffffff, // "infinite", per spec. Use 2^64-1 instead.
streams: make(map[uint32]*clientStream),
singleUse: singleUse,
wantSettingsAck: true,
pings: make(map[[8]byte]chan struct{}),
reqHeaderMu: make(chan struct{}, 1),
}
if d := t.idleConnTimeout(); d != 0 {
cc.idleTimeout = d
cc.idleTimer = time.AfterFunc(d, cc.onIdleTimeout)
}
if VerboseLogs {
t.vlogf("http2: Transport creating client conn %p to %v", cc, c.RemoteAddr())
}
cc.cond = sync.NewCond(&cc.mu)
cc.flow.add(int32(initialWindowSize))
// TODO: adjust this writer size to account for frame size +
// MTU + crypto/tls record padding.
cc.bw = bufio.NewWriter(stickyErrWriter{c, &cc.werr})
cc.br = bufio.NewReader(c)
cc.fr = NewFramer(cc.bw, cc.br)
if t.CountError != nil {
cc.fr.countError = t.CountError
}
cc.fr.ReadMetaHeaders = hpack.NewDecoder(initialHeaderTableSize, nil)
cc.fr.MaxHeaderListSize = t.maxHeaderListSize()
// TODO: SetMaxDynamicTableSize, SetMaxDynamicTableSizeLimit on
// henc in response to SETTINGS frames?
cc.henc = hpack.NewEncoder(&cc.hbuf)
if t.AllowHTTP {
cc.nextStreamID = 3
}
if cs, ok := c.(connectionStater); ok {
state := cs.ConnectionState()
cc.tlsState = &state
}
initialSettings := []Setting{
{ID: SettingEnablePush, Val: 0},
{ID: SettingInitialWindowSize, Val: transportDefaultStreamFlow},
}
if max := t.maxHeaderListSize(); max != 0 {
initialSettings = append(initialSettings, Setting{ID: SettingMaxHeaderListSize, Val: max})
}
cc.bw.Write(clientPreface)
cc.fr.WriteSettings(initialSettings...)
cc.fr.WriteWindowUpdate(0, transportDefaultConnFlow)
cc.inflow.add(transportDefaultConnFlow + initialWindowSize)
cc.bw.Flush()
if cc.werr != nil {
cc.Close()
return nil, cc.werr
}
go cc.readLoop()
return cc, nil
}
func (cc *ClientConn) healthCheck() {
pingTimeout := cc.t.pingTimeout()
// We don't need to periodically ping in the health check, because the readLoop of ClientConn will
// trigger the healthCheck again if there is no frame received.
ctx, cancel := context.WithTimeout(context.Background(), pingTimeout)
defer cancel()
err := cc.Ping(ctx)
if err != nil {
cc.closeForLostPing()
cc.t.connPool().MarkDead(cc)
return
}
}
// SetDoNotReuse marks cc as not reusable for future HTTP requests.
func (cc *ClientConn) SetDoNotReuse() {
cc.mu.Lock()
defer cc.mu.Unlock()
cc.doNotReuse = true
}
func (cc *ClientConn) setGoAway(f *GoAwayFrame) {
cc.mu.Lock()
defer cc.mu.Unlock()
old := cc.goAway
cc.goAway = f
// Merge the previous and current GoAway error frames.
if cc.goAwayDebug == "" {
cc.goAwayDebug = string(f.DebugData())
}
if old != nil && old.ErrCode != ErrCodeNo {
cc.goAway.ErrCode = old.ErrCode
}
last := f.LastStreamID
for streamID, cs := range cc.streams {
if streamID > last {
cs.abortStreamLocked(errClientConnGotGoAway)
}
}
}
// CanTakeNewRequest reports whether the connection can take a new request,
// meaning it has not been closed or received or sent a GOAWAY.
//
// If the caller is going to immediately make a new request on this
// connection, use ReserveNewRequest instead.
func (cc *ClientConn) CanTakeNewRequest() bool {
cc.mu.Lock()
defer cc.mu.Unlock()
return cc.canTakeNewRequestLocked()
}
// ReserveNewRequest is like CanTakeNewRequest but also reserves a
// concurrent stream in cc. The reservation is decremented on the
// next call to RoundTrip.
func (cc *ClientConn) ReserveNewRequest() bool {
cc.mu.Lock()
defer cc.mu.Unlock()
if st := cc.idleStateLocked(); !st.canTakeNewRequest {
return false
}
cc.streamsReserved++
return true
}
// ClientConnState describes the state of a ClientConn.
type ClientConnState struct {
// Closed is whether the connection is closed.
Closed bool
// Closing is whether the connection is in the process of
// closing. It may be closing due to shutdown, being a
// single-use connection, being marked as DoNotReuse, or
// having received a GOAWAY frame.
Closing bool
// StreamsActive is how many streams are active.
StreamsActive int
// StreamsReserved is how many streams have been reserved via
// ClientConn.ReserveNewRequest.
StreamsReserved int
// StreamsPending is how many requests have been sent in excess
// of the peer's advertised MaxConcurrentStreams setting and
// are waiting for other streams to complete.
StreamsPending int
// MaxConcurrentStreams is how many concurrent streams the
// peer advertised as acceptable. Zero means no SETTINGS
// frame has been received yet.
MaxConcurrentStreams uint32
// LastIdle, if non-zero, is when the connection last
// transitioned to idle state.
LastIdle time.Time
}
// State returns a snapshot of cc's state.
func (cc *ClientConn) State() ClientConnState {
cc.wmu.Lock()
maxConcurrent := cc.maxConcurrentStreams
if !cc.seenSettings {
maxConcurrent = 0
}
cc.wmu.Unlock()
cc.mu.Lock()
defer cc.mu.Unlock()
return ClientConnState{
Closed: cc.closed,
Closing: cc.closing || cc.singleUse || cc.doNotReuse || cc.goAway != nil,
StreamsActive: len(cc.streams),
StreamsReserved: cc.streamsReserved,
StreamsPending: cc.pendingRequests,
LastIdle: cc.lastIdle,
MaxConcurrentStreams: maxConcurrent,
}
}
// clientConnIdleState describes the suitability of a client
// connection to initiate a new RoundTrip request.
type clientConnIdleState struct {
canTakeNewRequest bool
}
func (cc *ClientConn) idleState() clientConnIdleState {
cc.mu.Lock()
defer cc.mu.Unlock()
return cc.idleStateLocked()
}
func (cc *ClientConn) idleStateLocked() (st clientConnIdleState) {
if cc.singleUse && cc.nextStreamID > 1 {
return
}
var maxConcurrentOkay bool
if cc.t.StrictMaxConcurrentStreams {
// We'll tell the caller we can take a new request to
// prevent the caller from dialing a new TCP
// connection, but then we'll block later before
// writing it.
maxConcurrentOkay = true
} else {
maxConcurrentOkay = int64(len(cc.streams)+cc.streamsReserved+1) <= int64(cc.maxConcurrentStreams)
}
st.canTakeNewRequest = cc.goAway == nil && !cc.closed && !cc.closing && maxConcurrentOkay &&
!cc.doNotReuse &&
int64(cc.nextStreamID)+2*int64(cc.pendingRequests) < math.MaxInt32 &&
!cc.tooIdleLocked()
return
}
func (cc *ClientConn) canTakeNewRequestLocked() bool {
st := cc.idleStateLocked()
return st.canTakeNewRequest
}
// tooIdleLocked reports whether this connection has been been sitting idle
// for too much wall time.
func (cc *ClientConn) tooIdleLocked() bool {
// The Round(0) strips the monontonic clock reading so the
// times are compared based on their wall time. We don't want
// to reuse a connection that's been sitting idle during
// VM/laptop suspend if monotonic time was also frozen.
return cc.idleTimeout != 0 && !cc.lastIdle.IsZero() && time.Since(cc.lastIdle.Round(0)) > cc.idleTimeout
}
// onIdleTimeout is called from a time.AfterFunc goroutine. It will
// only be called when we're idle, but because we're coming from a new
// goroutine, there could be a new request coming in at the same time,
// so this simply calls the synchronized closeIfIdle to shut down this
// connection. The timer could just call closeIfIdle, but this is more
// clear.
func (cc *ClientConn) onIdleTimeout() {
cc.closeIfIdle()
}
func (cc *ClientConn) closeIfIdle() {
cc.mu.Lock()
if len(cc.streams) > 0 || cc.streamsReserved > 0 {
cc.mu.Unlock()
return
}
cc.closed = true
nextID := cc.nextStreamID
// TODO: do clients send GOAWAY too? maybe? Just Close:
cc.mu.Unlock()
if VerboseLogs {
cc.vlogf("http2: Transport closing idle conn %p (forSingleUse=%v, maxStream=%v)", cc, cc.singleUse, nextID-2)
}
cc.tconn.Close()
}
func (cc *ClientConn) isDoNotReuseAndIdle() bool {
cc.mu.Lock()
defer cc.mu.Unlock()
return cc.doNotReuse && len(cc.streams) == 0
}
var shutdownEnterWaitStateHook = func() {}
// Shutdown gracefully closes the client connection, waiting for running streams to complete.
func (cc *ClientConn) Shutdown(ctx context.Context) error {
if err := cc.sendGoAway(); err != nil {
return err
}
// Wait for all in-flight streams to complete or connection to close
done := make(chan error, 1)
cancelled := false // guarded by cc.mu
go func() {
cc.mu.Lock()
defer cc.mu.Unlock()
for {
if len(cc.streams) == 0 || cc.closed {
cc.closed = true
done <- cc.tconn.Close()
break
}
if cancelled {
break
}
cc.cond.Wait()
}
}()
shutdownEnterWaitStateHook()
select {
case err := <-done:
return err
case <-ctx.Done():
cc.mu.Lock()
// Free the goroutine above
cancelled = true
cc.cond.Broadcast()
cc.mu.Unlock()
return ctx.Err()
}
}
func (cc *ClientConn) sendGoAway() error {
cc.mu.Lock()
closing := cc.closing
cc.closing = true
maxStreamID := cc.nextStreamID
cc.mu.Unlock()
if closing {
// GOAWAY sent already
return nil
}
cc.wmu.Lock()
defer cc.wmu.Unlock()
// Send a graceful shutdown frame to server
if err := cc.fr.WriteGoAway(maxStreamID, ErrCodeNo, nil); err != nil {
return err
}
if err := cc.bw.Flush(); err != nil {
return err
}
// Prevent new requests
return nil
}
// closes the client connection immediately. In-flight requests are interrupted.
// err is sent to streams.
func (cc *ClientConn) closeForError(err error) error {
cc.mu.Lock()
cc.closed = true
for _, cs := range cc.streams {
cs.abortStreamLocked(err)
}
defer cc.cond.Broadcast()
defer cc.mu.Unlock()
return cc.tconn.Close()
}
// Close closes the client connection immediately.
//
// In-flight requests are interrupted. For a graceful shutdown, use Shutdown instead.
func (cc *ClientConn) Close() error {
err := errors.New("http2: client connection force closed via ClientConn.Close")
return cc.closeForError(err)
}
// closes the client connection immediately. In-flight requests are interrupted.
func (cc *ClientConn) closeForLostPing() error {
err := errors.New("http2: client connection lost")
if f := cc.t.CountError; f != nil {
f("conn_close_lost_ping")
}
return cc.closeForError(err)
}
// errRequestCanceled is a copy of net/http's errRequestCanceled because it's not
// exported. At least they'll be DeepEqual for h1-vs-h2 comparisons tests.
var errRequestCanceled = errors.New("net/http: request canceled")
func commaSeparatedTrailers(req *http.Request) (string, error) {
keys := make([]string, 0, len(req.Trailer))
for k := range req.Trailer {
k = http.CanonicalHeaderKey(k)
switch k {
case "Transfer-Encoding", "Trailer", "Content-Length":
return "", fmt.Errorf("invalid Trailer key %q", k)
}
keys = append(keys, k)
}
if len(keys) > 0 {
sort.Strings(keys)
return strings.Join(keys, ","), nil
}
return "", nil
}
func (cc *ClientConn) responseHeaderTimeout() time.Duration {
if cc.t.t1 != nil {
return cc.t.t1.ResponseHeaderTimeout
}
// No way to do this (yet?) with just an http2.Transport. Probably
// no need. Request.Cancel this is the new way. We only need to support
// this for compatibility with the old http.Transport fields when
// we're doing transparent http2.
return 0
}
// checkConnHeaders checks whether req has any invalid connection-level headers.
// per RFC 7540 section 8.1.2.2: Connection-Specific Header Fields.
// Certain headers are special-cased as okay but not transmitted later.
func checkConnHeaders(req *http.Request) error {
if v := req.Header.Get("Upgrade"); v != "" {
return fmt.Errorf("http2: invalid Upgrade request header: %q", req.Header["Upgrade"])
}
if vv := req.Header["Transfer-Encoding"]; len(vv) > 0 && (len(vv) > 1 || vv[0] != "" && vv[0] != "chunked") {
return fmt.Errorf("http2: invalid Transfer-Encoding request header: %q", vv)
}
if vv := req.Header["Connection"]; len(vv) > 0 && (len(vv) > 1 || vv[0] != "" && !asciiEqualFold(vv[0], "close") && !asciiEqualFold(vv[0], "keep-alive")) {
return fmt.Errorf("http2: invalid Connection request header: %q", vv)
}
return nil
}
// actualContentLength returns a sanitized version of
// req.ContentLength, where 0 actually means zero (not unknown) and -1
// means unknown.
func actualContentLength(req *http.Request) int64 {
if req.Body == nil || req.Body == http.NoBody {
return 0
}
if req.ContentLength != 0 {
return req.ContentLength
}
return -1
}
func (cc *ClientConn) decrStreamReservations() {
cc.mu.Lock()
defer cc.mu.Unlock()
cc.decrStreamReservationsLocked()
}
func (cc *ClientConn) decrStreamReservationsLocked() {
if cc.streamsReserved > 0 {
cc.streamsReserved--
}
}
func (cc *ClientConn) RoundTrip(req *http.Request) (*http.Response, error) {
ctx := req.Context()
cs := &clientStream{
cc: cc,
ctx: ctx,
reqCancel: req.Cancel,
isHead: req.Method == "HEAD",
reqBody: req.Body,
reqBodyContentLength: actualContentLength(req),
trace: httptrace.ContextClientTrace(ctx),
peerClosed: make(chan struct{}),
abort: make(chan struct{}),
respHeaderRecv: make(chan struct{}),
donec: make(chan struct{}),
}
go cs.doRequest(req)
waitDone := func() error {
select {
case <-cs.donec:
return nil
case <-ctx.Done():
return ctx.Err()
case <-cs.reqCancel:
return errRequestCanceled
}
}
for {
select {
case <-cs.respHeaderRecv:
res := cs.res
if res.StatusCode > 299 {
// On error or status code 3xx, 4xx, 5xx, etc abort any
// ongoing write, assuming that the server doesn't care
// about our request body. If the server replied with 1xx or
// 2xx, however, then assume the server DOES potentially
// want our body (e.g. full-duplex streaming:
// golang.org/issue/13444). If it turns out the server
// doesn't, they'll RST_STREAM us soon enough. This is a
// heuristic to avoid adding knobs to Transport. Hopefully
// we can keep it.
cs.abortRequestBodyWrite()
}
res.Request = req
res.TLS = cc.tlsState
if res.Body == noBody && actualContentLength(req) == 0 {
// If there isn't a request or response body still being
// written, then wait for the stream to be closed before
// RoundTrip returns.
if err := waitDone(); err != nil {
return nil, err
}
}
return res, nil
case <-cs.abort:
waitDone()
return nil, cs.abortErr
case <-ctx.Done():
err := ctx.Err()
cs.abortStream(err)
return nil, err
case <-cs.reqCancel:
cs.abortStream(errRequestCanceled)
return nil, errRequestCanceled
}
}
}
// doRequest runs for the duration of the request lifetime.
//
// It sends the request and performs post-request cleanup (closing Request.Body, etc.).
func (cs *clientStream) doRequest(req *http.Request) {
err := cs.writeRequest(req)
cs.cleanupWriteRequest(err)
}
// writeRequest sends a request.
//
// It returns nil after the request is written, the response read,
// and the request stream is half-closed by the peer.
//
// It returns non-nil if the request ends otherwise.
// If the returned error is StreamError, the error Code may be used in resetting the stream.
func (cs *clientStream) writeRequest(req *http.Request) (err error) {
cc := cs.cc
ctx := cs.ctx
if err := checkConnHeaders(req); err != nil {
return err
}
// Acquire the new-request lock by writing to reqHeaderMu.
// This lock guards the critical section covering allocating a new stream ID
// (requires mu) and creating the stream (requires wmu).
if cc.reqHeaderMu == nil {
panic("RoundTrip on uninitialized ClientConn") // for tests
}
select {
case cc.reqHeaderMu <- struct{}{}:
case <-cs.reqCancel:
return errRequestCanceled
case <-ctx.Done():
return ctx.Err()
}
cc.mu.Lock()
if cc.idleTimer != nil {
cc.idleTimer.Stop()
}
cc.decrStreamReservationsLocked()
if err := cc.awaitOpenSlotForStreamLocked(cs); err != nil {
cc.mu.Unlock()
<-cc.reqHeaderMu
return err
}
cc.addStreamLocked(cs) // assigns stream ID
cc.mu.Unlock()
// TODO(bradfitz): this is a copy of the logic in net/http. Unify somewhere?
if !cc.t.disableCompression() &&
req.Header.Get("Accept-Encoding") == "" &&
req.Header.Get("Range") == "" &&
!cs.isHead {
// Request gzip only, not deflate. Deflate is ambiguous and
// not as universally supported anyway.
// See: https://zlib.net/zlib_faq.html#faq39
//
// Note that we don't request this for HEAD requests,
// due to a bug in nginx:
// http://trac.nginx.org/nginx/ticket/358
// https://golang.org/issue/5522
//
// We don't request gzip if the request is for a range, since
// auto-decoding a portion of a gzipped document will just fail
// anyway. See https://golang.org/issue/8923
cs.requestedGzip = true
}
continueTimeout := cc.t.expectContinueTimeout()
if continueTimeout != 0 &&
!httpguts.HeaderValuesContainsToken(
req.Header["Expect"],
"100-continue") {
continueTimeout = 0
cs.on100 = make(chan struct{}, 1)
}
// Past this point (where we send request headers), it is possible for
// RoundTrip to return successfully. Since the RoundTrip contract permits
// the caller to "mutate or reuse" the Request after closing the Response's Body,
// we must take care when referencing the Request from here on.
err = cs.encodeAndWriteHeaders(req)
<-cc.reqHeaderMu
if err != nil {
return err
}
hasBody := cs.reqBodyContentLength != 0
if !hasBody {
cs.sentEndStream = true
} else {
if continueTimeout != 0 {
traceWait100Continue(cs.trace)
timer := time.NewTimer(continueTimeout)
select {
case <-timer.C:
err = nil
case <-cs.on100:
err = nil
case <-cs.abort:
err = cs.abortErr
case <-ctx.Done():
err = ctx.Err()
case <-cs.reqCancel:
err = errRequestCanceled
}
timer.Stop()
if err != nil {
traceWroteRequest(cs.trace, err)
return err
}
}
if err = cs.writeRequestBody(req); err != nil {
if err != errStopReqBodyWrite {
traceWroteRequest(cs.trace, err)
return err
}
} else {
cs.sentEndStream = true
}
}
traceWroteRequest(cs.trace, err)
var respHeaderTimer <-chan time.Time
var respHeaderRecv chan struct{}
if d := cc.responseHeaderTimeout(); d != 0 {
timer := time.NewTimer(d)
defer timer.Stop()
respHeaderTimer = timer.C
respHeaderRecv = cs.respHeaderRecv
}
// Wait until the peer half-closes its end of the stream,
// or until the request is aborted (via context, error, or otherwise),
// whichever comes first.
for {
select {
case <-cs.peerClosed:
return nil
case <-respHeaderTimer:
return errTimeout
case <-respHeaderRecv:
respHeaderTimer = nil // keep waiting for END_STREAM
case <-cs.abort:
return cs.abortErr
case <-ctx.Done():
return ctx.Err()
case <-cs.reqCancel:
return errRequestCanceled
}
}
}
func (cs *clientStream) encodeAndWriteHeaders(req *http.Request) error {
cc := cs.cc
ctx := cs.ctx
cc.wmu.Lock()
defer cc.wmu.Unlock()
// If the request was canceled while waiting for cc.mu, just quit.
select {
case <-cs.abort:
return cs.abortErr
case <-ctx.Done():
return ctx.Err()
case <-cs.reqCancel:
return errRequestCanceled
default:
}
// Encode headers.
//
// we send: HEADERS{1}, CONTINUATION{0,} + DATA{0,} (DATA is
// sent by writeRequestBody below, along with any Trailers,
// again in form HEADERS{1}, CONTINUATION{0,})
trailers, err := commaSeparatedTrailers(req)
if err != nil {
return err
}
hasTrailers := trailers != ""
contentLen := actualContentLength(req)
hasBody := contentLen != 0
hdrs, err := cc.encodeHeaders(req, cs.requestedGzip, trailers, contentLen)
if err != nil {
return err
}
// Write the request.
endStream := !hasBody && !hasTrailers
cs.sentHeaders = true
err = cc.writeHeaders(cs.ID, endStream, int(cc.maxFrameSize), hdrs)
traceWroteHeaders(cs.trace)
return err
}
// cleanupWriteRequest performs post-request tasks.
//
// If err (the result of writeRequest) is non-nil and the stream is not closed,
// cleanupWriteRequest will send a reset to the peer.
func (cs *clientStream) cleanupWriteRequest(err error) {
cc := cs.cc
if cs.ID == 0 {
// We were canceled before creating the stream, so return our reservation.
cc.decrStreamReservations()
}
// TODO: write h12Compare test showing whether
// Request.Body is closed by the Transport,
// and in multiple cases: server replies <=299 and >299
// while still writing request body
cc.mu.Lock()
bodyClosed := cs.reqBodyClosed
cs.reqBodyClosed = true
cc.mu.Unlock()
if !bodyClosed && cs.reqBody != nil {
cs.reqBody.Close()
}
if err != nil && cs.sentEndStream {
// If the connection is closed immediately after the response is read,
// we may be aborted before finishing up here. If the stream was closed
// cleanly on both sides, there is no error.
select {
case <-cs.peerClosed:
err = nil
default:
}
}
if err != nil {
cs.abortStream(err) // possibly redundant, but harmless
if cs.sentHeaders {
if se, ok := err.(StreamError); ok {
if se.Cause != errFromPeer {
cc.writeStreamReset(cs.ID, se.Code, err)
}
} else {
cc.writeStreamReset(cs.ID, ErrCodeCancel, err)
}
}
cs.bufPipe.CloseWithError(err) // no-op if already closed
} else {
if cs.sentHeaders && !cs.sentEndStream {
cc.writeStreamReset(cs.ID, ErrCodeNo, nil)
}
cs.bufPipe.CloseWithError(errRequestCanceled)
}
if cs.ID != 0 {
cc.forgetStreamID(cs.ID)
}
cc.wmu.Lock()
werr := cc.werr
cc.wmu.Unlock()
if werr != nil {
cc.Close()
}
close(cs.donec)
}
// awaitOpenSlotForStream waits until len(streams) < maxConcurrentStreams.
// Must hold cc.mu.
func (cc *ClientConn) awaitOpenSlotForStreamLocked(cs *clientStream) error {
for {
cc.lastActive = time.Now()
if cc.closed || !cc.canTakeNewRequestLocked() {
return errClientConnUnusable
}
cc.lastIdle = time.Time{}
if int64(len(cc.streams)) < int64(cc.maxConcurrentStreams) {
return nil
}
cc.pendingRequests++
cc.cond.Wait()
cc.pendingRequests--
select {
case <-cs.abort:
return cs.abortErr
default:
}
}
}
// requires cc.wmu be held
func (cc *ClientConn) writeHeaders(streamID uint32, endStream bool, maxFrameSize int, hdrs []byte) error {
first := true // first frame written (HEADERS is first, then CONTINUATION)
for len(hdrs) > 0 && cc.werr == nil {
chunk := hdrs
if len(chunk) > maxFrameSize {
chunk = chunk[:maxFrameSize]
}
hdrs = hdrs[len(chunk):]
endHeaders := len(hdrs) == 0
if first {
cc.fr.WriteHeaders(HeadersFrameParam{
StreamID: streamID,
BlockFragment: chunk,
EndStream: endStream,
EndHeaders: endHeaders,
})
first = false
} else {
cc.fr.WriteContinuation(streamID, endHeaders, chunk)
}
}
cc.bw.Flush()
return cc.werr
}
// internal error values; they don't escape to callers
var (
// abort request body write; don't send cancel
errStopReqBodyWrite = errors.New("http2: aborting request body write")
// abort request body write, but send stream reset of cancel.
errStopReqBodyWriteAndCancel = errors.New("http2: canceling request")
errReqBodyTooLong = errors.New("http2: request body larger than specified content length")
)
// frameScratchBufferLen returns the length of a buffer to use for
// outgoing request bodies to read/write to/from.
//
// It returns max(1, min(peer's advertised max frame size,
// Request.ContentLength+1, 512KB)).
func (cs *clientStream) frameScratchBufferLen(maxFrameSize int) int {
const max = 512 << 10
n := int64(maxFrameSize)
if n > max {
n = max
}
if cl := cs.reqBodyContentLength; cl != -1 && cl+1 < n {
// Add an extra byte past the declared content-length to
// give the caller's Request.Body io.Reader a chance to
// give us more bytes than they declared, so we can catch it
// early.
n = cl + 1
}
if n < 1 {
return 1
}
return int(n) // doesn't truncate; max is 512K
}
var bufPool sync.Pool // of *[]byte
func (cs *clientStream) writeRequestBody(req *http.Request) (err error) {
cc := cs.cc
body := cs.reqBody
sentEnd := false // whether we sent the final DATA frame w/ END_STREAM
hasTrailers := req.Trailer != nil
remainLen := cs.reqBodyContentLength
hasContentLen := remainLen != -1
cc.mu.Lock()
maxFrameSize := int(cc.maxFrameSize)
cc.mu.Unlock()
// Scratch buffer for reading into & writing from.
scratchLen := cs.frameScratchBufferLen(maxFrameSize)
var buf []byte
if bp, ok := bufPool.Get().(*[]byte); ok && len(*bp) >= scratchLen {
defer bufPool.Put(bp)
buf = *bp
} else {
buf = make([]byte, scratchLen)
defer bufPool.Put(&buf)
}
var sawEOF bool
for !sawEOF {
n, err := body.Read(buf[:len(buf)])
if hasContentLen {
remainLen -= int64(n)
if remainLen == 0 && err == nil {
// The request body's Content-Length was predeclared and
// we just finished reading it all, but the underlying io.Reader
// returned the final chunk with a nil error (which is one of
// the two valid things a Reader can do at EOF). Because we'd prefer
// to send the END_STREAM bit early, double-check that we're actually
// at EOF. Subsequent reads should return (0, EOF) at this point.
// If either value is different, we return an error in one of two ways below.
var scratch [1]byte
var n1 int
n1, err = body.Read(scratch[:])
remainLen -= int64(n1)
}
if remainLen < 0 {
err = errReqBodyTooLong
return err
}
}
if err == io.EOF {
sawEOF = true
err = nil
} else if err != nil {
return err
}
remain := buf[:n]
for len(remain) > 0 && err == nil {
var allowed int32
allowed, err = cs.awaitFlowControl(len(remain))
if err != nil {
return err
}
cc.wmu.Lock()
data := remain[:allowed]
remain = remain[allowed:]
sentEnd = sawEOF && len(remain) == 0 && !hasTrailers
err = cc.fr.WriteData(cs.ID, sentEnd, data)
if err == nil {
// TODO(bradfitz): this flush is for latency, not bandwidth.
// Most requests won't need this. Make this opt-in or
// opt-out? Use some heuristic on the body type? Nagel-like
// timers? Based on 'n'? Only last chunk of this for loop,
// unless flow control tokens are low? For now, always.
// If we change this, see comment below.
err = cc.bw.Flush()
}
cc.wmu.Unlock()
}
if err != nil {
return err
}
}
if sentEnd {
// Already sent END_STREAM (which implies we have no
// trailers) and flushed, because currently all
// WriteData frames above get a flush. So we're done.
return nil
}
// Since the RoundTrip contract permits the caller to "mutate or reuse"
// a request after the Response's Body is closed, verify that this hasn't
// happened before accessing the trailers.
cc.mu.Lock()
trailer := req.Trailer
err = cs.abortErr
cc.mu.Unlock()
if err != nil {
return err
}
cc.wmu.Lock()
defer cc.wmu.Unlock()
var trls []byte
if len(trailer) > 0 {
trls, err = cc.encodeTrailers(trailer)
if err != nil {
return err
}
}
// Two ways to send END_STREAM: either with trailers, or
// with an empty DATA frame.
if len(trls) > 0 {
err = cc.writeHeaders(cs.ID, true, maxFrameSize, trls)
} else {
err = cc.fr.WriteData(cs.ID, true, nil)
}
if ferr := cc.bw.Flush(); ferr != nil && err == nil {
err = ferr
}
return err
}
// awaitFlowControl waits for [1, min(maxBytes, cc.cs.maxFrameSize)] flow
// control tokens from the server.
// It returns either the non-zero number of tokens taken or an error
// if the stream is dead.
func (cs *clientStream) awaitFlowControl(maxBytes int) (taken int32, err error) {
cc := cs.cc
ctx := cs.ctx
cc.mu.Lock()
defer cc.mu.Unlock()
for {
if cc.closed {
return 0, errClientConnClosed
}
if cs.reqBodyClosed {
return 0, errStopReqBodyWrite
}
select {
case <-cs.abort:
return 0, cs.abortErr
case <-ctx.Done():
return 0, ctx.Err()
case <-cs.reqCancel:
return 0, errRequestCanceled
default:
}
if a := cs.flow.available(); a > 0 {
take := a
if int(take) > maxBytes {
take = int32(maxBytes) // can't truncate int; take is int32
}
if take > int32(cc.maxFrameSize) {
take = int32(cc.maxFrameSize)
}
cs.flow.take(take)
return take, nil
}
cc.cond.Wait()
}
}
var errNilRequestURL = errors.New("http2: Request.URI is nil")
// requires cc.wmu be held.
func (cc *ClientConn) encodeHeaders(req *http.Request, addGzipHeader bool, trailers string, contentLength int64) ([]byte, error) {
cc.hbuf.Reset()
if req.URL == nil {
return nil, errNilRequestURL
}
host := req.Host
if host == "" {
host = req.URL.Host
}
host, err := httpguts.PunycodeHostPort(host)
if err != nil {
return nil, err
}
var path string
if req.Method != "CONNECT" {
path = req.URL.RequestURI()
if !validPseudoPath(path) {
orig := path
path = strings.TrimPrefix(path, req.URL.Scheme+"://"+host)
if !validPseudoPath(path) {
if req.URL.Opaque != "" {
return nil, fmt.Errorf("invalid request :path %q from URL.Opaque = %q", orig, req.URL.Opaque)
} else {
return nil, fmt.Errorf("invalid request :path %q", orig)
}
}
}
}
// Check for any invalid headers and return an error before we
// potentially pollute our hpack state. (We want to be able to
// continue to reuse the hpack encoder for future requests)
for k, vv := range req.Header {
if !httpguts.ValidHeaderFieldName(k) {
return nil, fmt.Errorf("invalid HTTP header name %q", k)
}
for _, v := range vv {
if !httpguts.ValidHeaderFieldValue(v) {
return nil, fmt.Errorf("invalid HTTP header value %q for header %q", v, k)
}
}
}
enumerateHeaders := func(f func(name, value string)) {
// 8.1.2.3 Request Pseudo-Header Fields
// The :path pseudo-header field includes the path and query parts of the
// target URI (the path-absolute production and optionally a '?' character
// followed by the query production (see Sections 3.3 and 3.4 of
// [RFC3986]).
f(":authority", host)
m := req.Method
if m == "" {
m = http.MethodGet
}
f(":method", m)
if req.Method != "CONNECT" {
f(":path", path)
f(":scheme", req.URL.Scheme)
}
if trailers != "" {
f("trailer", trailers)
}
var didUA bool
for k, vv := range req.Header {
if asciiEqualFold(k, "host") || asciiEqualFold(k, "content-length") {
// Host is :authority, already sent.
// Content-Length is automatic, set below.
continue
} else if asciiEqualFold(k, "connection") ||
asciiEqualFold(k, "proxy-connection") ||
asciiEqualFold(k, "transfer-encoding") ||
asciiEqualFold(k, "upgrade") ||
asciiEqualFold(k, "keep-alive") {
// Per 8.1.2.2 Connection-Specific Header
// Fields, don't send connection-specific
// fields. We have already checked if any
// are error-worthy so just ignore the rest.
continue
} else if asciiEqualFold(k, "user-agent") {
// Match Go's http1 behavior: at most one
// User-Agent. If set to nil or empty string,
// then omit it. Otherwise if not mentioned,
// include the default (below).
didUA = true
if len(vv) < 1 {
continue
}
vv = vv[:1]
if vv[0] == "" {
continue
}
} else if asciiEqualFold(k, "cookie") {
// Per 8.1.2.5 To allow for better compression efficiency, the
// Cookie header field MAY be split into separate header fields,
// each with one or more cookie-pairs.
for _, v := range vv {
for {
p := strings.IndexByte(v, ';')
if p < 0 {
break
}
f("cookie", v[:p])
p++
// strip space after semicolon if any.
for p+1 <= len(v) && v[p] == ' ' {
p++
}
v = v[p:]
}
if len(v) > 0 {
f("cookie", v)
}
}
continue
}
for _, v := range vv {
f(k, v)
}
}
if shouldSendReqContentLength(req.Method, contentLength) {
f("content-length", strconv.FormatInt(contentLength, 10))
}
if addGzipHeader {
f("accept-encoding", "gzip")
}
if !didUA {
f("user-agent", defaultUserAgent)
}
}
// Do a first pass over the headers counting bytes to ensure
// we don't exceed cc.peerMaxHeaderListSize. This is done as a
// separate pass before encoding the headers to prevent
// modifying the hpack state.
hlSize := uint64(0)
enumerateHeaders(func(name, value string) {
hf := hpack.HeaderField{Name: name, Value: value}
hlSize += uint64(hf.Size())
})
if hlSize > cc.peerMaxHeaderListSize {
return nil, errRequestHeaderListSize
}
trace := httptrace.ContextClientTrace(req.Context())
traceHeaders := traceHasWroteHeaderField(trace)
// Header list size is ok. Write the headers.
enumerateHeaders(func(name, value string) {
name, ascii := asciiToLower(name)
if !ascii {
// Skip writing invalid headers. Per RFC 7540, Section 8.1.2, header
// field names have to be ASCII characters (just as in HTTP/1.x).
return
}
cc.writeHeader(name, value)
if traceHeaders {
traceWroteHeaderField(trace, name, value)
}
})
return cc.hbuf.Bytes(), nil
}
// shouldSendReqContentLength reports whether the http2.Transport should send
// a "content-length" request header. This logic is basically a copy of the net/http
// transferWriter.shouldSendContentLength.
// The contentLength is the corrected contentLength (so 0 means actually 0, not unknown).
// -1 means unknown.
func shouldSendReqContentLength(method string, contentLength int64) bool {
if contentLength > 0 {
return true
}
if contentLength < 0 {
return false
}
// For zero bodies, whether we send a content-length depends on the method.
// It also kinda doesn't matter for http2 either way, with END_STREAM.
switch method {
case "POST", "PUT", "PATCH":
return true
default:
return false
}
}
// requires cc.wmu be held.
func (cc *ClientConn) encodeTrailers(trailer http.Header) ([]byte, error) {
cc.hbuf.Reset()
hlSize := uint64(0)
for k, vv := range trailer {
for _, v := range vv {
hf := hpack.HeaderField{Name: k, Value: v}
hlSize += uint64(hf.Size())
}
}
if hlSize > cc.peerMaxHeaderListSize {
return nil, errRequestHeaderListSize
}
for k, vv := range trailer {
lowKey, ascii := asciiToLower(k)
if !ascii {
// Skip writing invalid headers. Per RFC 7540, Section 8.1.2, header
// field names have to be ASCII characters (just as in HTTP/1.x).
continue
}
// Transfer-Encoding, etc.. have already been filtered at the
// start of RoundTrip
for _, v := range vv {
cc.writeHeader(lowKey, v)
}
}
return cc.hbuf.Bytes(), nil
}
func (cc *ClientConn) writeHeader(name, value string) {
if VerboseLogs {
log.Printf("http2: Transport encoding header %q = %q", name, value)
}
cc.henc.WriteField(hpack.HeaderField{Name: name, Value: value})
}
type resAndError struct {
_ incomparable
res *http.Response
err error
}
// requires cc.mu be held.
func (cc *ClientConn) addStreamLocked(cs *clientStream) {
cs.flow.add(int32(cc.initialWindowSize))
cs.flow.setConnFlow(&cc.flow)
cs.inflow.add(transportDefaultStreamFlow)
cs.inflow.setConnFlow(&cc.inflow)
cs.ID = cc.nextStreamID
cc.nextStreamID += 2
cc.streams[cs.ID] = cs
if cs.ID == 0 {
panic("assigned stream ID 0")
}
}
func (cc *ClientConn) forgetStreamID(id uint32) {
cc.mu.Lock()
slen := len(cc.streams)
delete(cc.streams, id)
if len(cc.streams) != slen-1 {
panic("forgetting unknown stream id")
}
cc.lastActive = time.Now()
if len(cc.streams) == 0 && cc.idleTimer != nil {
cc.idleTimer.Reset(cc.idleTimeout)
cc.lastIdle = time.Now()
}
// Wake up writeRequestBody via clientStream.awaitFlowControl and
// wake up RoundTrip if there is a pending request.
cc.cond.Broadcast()
closeOnIdle := cc.singleUse || cc.doNotReuse || cc.t.disableKeepAlives()
if closeOnIdle && cc.streamsReserved == 0 && len(cc.streams) == 0 {
if VerboseLogs {
cc.vlogf("http2: Transport closing idle conn %p (forSingleUse=%v, maxStream=%v)", cc, cc.singleUse, cc.nextStreamID-2)
}
cc.closed = true
defer cc.tconn.Close()
}
cc.mu.Unlock()
}
// clientConnReadLoop is the state owned by the clientConn's frame-reading readLoop.
type clientConnReadLoop struct {
_ incomparable
cc *ClientConn
}
// readLoop runs in its own goroutine and reads and dispatches frames.
func (cc *ClientConn) readLoop() {
rl := &clientConnReadLoop{cc: cc}
defer rl.cleanup()
cc.readerErr = rl.run()
if ce, ok := cc.readerErr.(ConnectionError); ok {
cc.wmu.Lock()
cc.fr.WriteGoAway(0, ErrCode(ce), nil)
cc.wmu.Unlock()
}
}
// GoAwayError is returned by the Transport when the server closes the
// TCP connection after sending a GOAWAY frame.
type GoAwayError struct {
LastStreamID uint32
ErrCode ErrCode
DebugData string
}
func (e GoAwayError) Error() string {
return fmt.Sprintf("http2: server sent GOAWAY and closed the connection; LastStreamID=%v, ErrCode=%v, debug=%q",
e.LastStreamID, e.ErrCode, e.DebugData)
}
func isEOFOrNetReadError(err error) bool {
if err == io.EOF {
return true
}
ne, ok := err.(*net.OpError)
return ok && ne.Op == "read"
}
func (rl *clientConnReadLoop) cleanup() {
cc := rl.cc
defer cc.tconn.Close()
defer cc.t.connPool().MarkDead(cc)
defer close(cc.readerDone)
if cc.idleTimer != nil {
cc.idleTimer.Stop()
}
// Close any response bodies if the server closes prematurely.
// TODO: also do this if we've written the headers but not
// gotten a response yet.
err := cc.readerErr
cc.mu.Lock()
if cc.goAway != nil && isEOFOrNetReadError(err) {
err = GoAwayError{
LastStreamID: cc.goAway.LastStreamID,
ErrCode: cc.goAway.ErrCode,
DebugData: cc.goAwayDebug,
}
} else if err == io.EOF {
err = io.ErrUnexpectedEOF
}
cc.closed = true
for _, cs := range cc.streams {
cs.abortStreamLocked(err)
}
cc.cond.Broadcast()
cc.mu.Unlock()
}
// countReadFrameError calls Transport.CountError with a string
// representing err.
func (cc *ClientConn) countReadFrameError(err error) {
f := cc.t.CountError
if f == nil || err == nil {
return
}
if ce, ok := err.(ConnectionError); ok {
errCode := ErrCode(ce)
f(fmt.Sprintf("read_frame_conn_error_%s", errCode.stringToken()))
return
}
if errors.Is(err, io.EOF) {
f("read_frame_eof")
return
}
if errors.Is(err, io.ErrUnexpectedEOF) {
f("read_frame_unexpected_eof")
return
}
if errors.Is(err, ErrFrameTooLarge) {
f("read_frame_too_large")
return
}
f("read_frame_other")
}
func (rl *clientConnReadLoop) run() error {
cc := rl.cc
gotSettings := false
readIdleTimeout := cc.t.ReadIdleTimeout
var t *time.Timer
if readIdleTimeout != 0 {
t = time.AfterFunc(readIdleTimeout, cc.healthCheck)
defer t.Stop()
}
for {
f, err := cc.fr.ReadFrame()
if t != nil {
t.Reset(readIdleTimeout)
}
if err != nil {
cc.vlogf("http2: Transport readFrame error on conn %p: (%T) %v", cc, err, err)
}
if se, ok := err.(StreamError); ok {
if cs := rl.streamByID(se.StreamID); cs != nil {
if se.Cause == nil {
se.Cause = cc.fr.errDetail
}
rl.endStreamError(cs, se)
}
continue
} else if err != nil {
cc.countReadFrameError(err)
return err
}
if VerboseLogs {
cc.vlogf("http2: Transport received %s", summarizeFrame(f))
}
if !gotSettings {
if _, ok := f.(*SettingsFrame); !ok {
cc.logf("protocol error: received %T before a SETTINGS frame", f)
return ConnectionError(ErrCodeProtocol)
}
gotSettings = true
}
switch f := f.(type) {
case *MetaHeadersFrame:
err = rl.processHeaders(f)
case *DataFrame:
err = rl.processData(f)
case *GoAwayFrame:
err = rl.processGoAway(f)
case *RSTStreamFrame:
err = rl.processResetStream(f)
case *SettingsFrame:
err = rl.processSettings(f)
case *PushPromiseFrame:
err = rl.processPushPromise(f)
case *WindowUpdateFrame:
err = rl.processWindowUpdate(f)
case *PingFrame:
err = rl.processPing(f)
default:
cc.logf("Transport: unhandled response frame type %T", f)
}
if err != nil {
if VerboseLogs {
cc.vlogf("http2: Transport conn %p received error from processing frame %v: %v", cc, summarizeFrame(f), err)
}
return err
}
}
}
func (rl *clientConnReadLoop) processHeaders(f *MetaHeadersFrame) error {
cs := rl.streamByID(f.StreamID)
if cs == nil {
// We'd get here if we canceled a request while the
// server had its response still in flight. So if this
// was just something we canceled, ignore it.
return nil
}
if cs.readClosed {
rl.endStreamError(cs, StreamError{
StreamID: f.StreamID,
Code: ErrCodeProtocol,
Cause: errors.New("protocol error: headers after END_STREAM"),
})
return nil
}
if !cs.firstByte {
if cs.trace != nil {
// TODO(bradfitz): move first response byte earlier,
// when we first read the 9 byte header, not waiting
// until all the HEADERS+CONTINUATION frames have been
// merged. This works for now.
traceFirstResponseByte(cs.trace)
}
cs.firstByte = true
}
if !cs.pastHeaders {
cs.pastHeaders = true
} else {
return rl.processTrailers(cs, f)
}
res, err := rl.handleResponse(cs, f)
if err != nil {
if _, ok := err.(ConnectionError); ok {
return err
}
// Any other error type is a stream error.
rl.endStreamError(cs, StreamError{
StreamID: f.StreamID,
Code: ErrCodeProtocol,
Cause: err,
})
return nil // return nil from process* funcs to keep conn alive
}
if res == nil {
// (nil, nil) special case. See handleResponse docs.
return nil
}
cs.resTrailer = &res.Trailer
cs.res = res
close(cs.respHeaderRecv)
if f.StreamEnded() {
rl.endStream(cs)
}
return nil
}
// may return error types nil, or ConnectionError. Any other error value
// is a StreamError of type ErrCodeProtocol. The returned error in that case
// is the detail.
//
// As a special case, handleResponse may return (nil, nil) to skip the
// frame (currently only used for 1xx responses).
func (rl *clientConnReadLoop) handleResponse(cs *clientStream, f *MetaHeadersFrame) (*http.Response, error) {
if f.Truncated {
return nil, errResponseHeaderListSize
}
status := f.PseudoValue("status")
if status == "" {
return nil, errors.New("malformed response from server: missing status pseudo header")
}
statusCode, err := strconv.Atoi(status)
if err != nil {
return nil, errors.New("malformed response from server: malformed non-numeric status pseudo header")
}
regularFields := f.RegularFields()
strs := make([]string, len(regularFields))
header := make(http.Header, len(regularFields))
res := &http.Response{
Proto: "HTTP/2.0",
ProtoMajor: 2,
Header: header,
StatusCode: statusCode,
Status: status + " " + http.StatusText(statusCode),
}
for _, hf := range regularFields {
key := http.CanonicalHeaderKey(hf.Name)
if key == "Trailer" {
t := res.Trailer
if t == nil {
t = make(http.Header)
res.Trailer = t
}
foreachHeaderElement(hf.Value, func(v string) {
t[http.CanonicalHeaderKey(v)] = nil
})
} else {
vv := header[key]
if vv == nil && len(strs) > 0 {
// More than likely this will be a single-element key.
// Most headers aren't multi-valued.
// Set the capacity on strs[0] to 1, so any future append
// won't extend the slice into the other strings.
vv, strs = strs[:1:1], strs[1:]
vv[0] = hf.Value
header[key] = vv
} else {
header[key] = append(vv, hf.Value)
}
}
}
if statusCode >= 100 && statusCode <= 199 {
if f.StreamEnded() {
return nil, errors.New("1xx informational response with END_STREAM flag")
}
cs.num1xx++
const max1xxResponses = 5 // arbitrary bound on number of informational responses, same as net/http
if cs.num1xx > max1xxResponses {
return nil, errors.New("http2: too many 1xx informational responses")
}
if fn := cs.get1xxTraceFunc(); fn != nil {
if err := fn(statusCode, textproto.MIMEHeader(header)); err != nil {
return nil, err
}
}
if statusCode == 100 {
traceGot100Continue(cs.trace)
select {
case cs.on100 <- struct{}{}:
default:
}
}
cs.pastHeaders = false // do it all again
return nil, nil
}
res.ContentLength = -1
if clens := res.Header["Content-Length"]; len(clens) == 1 {
if cl, err := strconv.ParseUint(clens[0], 10, 63); err == nil {
res.ContentLength = int64(cl)
} else {
// TODO: care? unlike http/1, it won't mess up our framing, so it's
// more safe smuggling-wise to ignore.
}
} else if len(clens) > 1 {
// TODO: care? unlike http/1, it won't mess up our framing, so it's
// more safe smuggling-wise to ignore.
}
if cs.isHead {
res.Body = noBody
return res, nil
}
if f.StreamEnded() {
if res.ContentLength > 0 {
res.Body = missingBody{}
} else {
res.Body = noBody
}
return res, nil
}
cs.bufPipe.setBuffer(&dataBuffer{expected: res.ContentLength})
cs.bytesRemain = res.ContentLength
res.Body = transportResponseBody{cs}
if cs.requestedGzip && res.Header.Get("Content-Encoding") == "gzip" {
res.Header.Del("Content-Encoding")
res.Header.Del("Content-Length")
res.ContentLength = -1
res.Body = &gzipReader{body: res.Body}
res.Uncompressed = true
}
return res, nil
}
func (rl *clientConnReadLoop) processTrailers(cs *clientStream, f *MetaHeadersFrame) error {
if cs.pastTrailers {
// Too many HEADERS frames for this stream.
return ConnectionError(ErrCodeProtocol)
}
cs.pastTrailers = true
if !f.StreamEnded() {
// We expect that any headers for trailers also
// has END_STREAM.
return ConnectionError(ErrCodeProtocol)
}
if len(f.PseudoFields()) > 0 {
// No pseudo header fields are defined for trailers.
// TODO: ConnectionError might be overly harsh? Check.
return ConnectionError(ErrCodeProtocol)
}
trailer := make(http.Header)
for _, hf := range f.RegularFields() {
key := http.CanonicalHeaderKey(hf.Name)
trailer[key] = append(trailer[key], hf.Value)
}
cs.trailer = trailer
rl.endStream(cs)
return nil
}
// transportResponseBody is the concrete type of Transport.RoundTrip's
// Response.Body. It is an io.ReadCloser.
type transportResponseBody struct {
cs *clientStream
}
func (b transportResponseBody) Read(p []byte) (n int, err error) {
cs := b.cs
cc := cs.cc
if cs.readErr != nil {
return 0, cs.readErr
}
n, err = b.cs.bufPipe.Read(p)
if cs.bytesRemain != -1 {
if int64(n) > cs.bytesRemain {
n = int(cs.bytesRemain)
if err == nil {
err = errors.New("net/http: server replied with more than declared Content-Length; truncated")
cs.abortStream(err)
}
cs.readErr = err
return int(cs.bytesRemain), err
}
cs.bytesRemain -= int64(n)
if err == io.EOF && cs.bytesRemain > 0 {
err = io.ErrUnexpectedEOF
cs.readErr = err
return n, err
}
}
if n == 0 {
// No flow control tokens to send back.
return
}
cc.mu.Lock()
var connAdd, streamAdd int32
// Check the conn-level first, before the stream-level.
if v := cc.inflow.available(); v < transportDefaultConnFlow/2 {
connAdd = transportDefaultConnFlow - v
cc.inflow.add(connAdd)
}
if err == nil { // No need to refresh if the stream is over or failed.
// Consider any buffered body data (read from the conn but not
// consumed by the client) when computing flow control for this
// stream.
v := int(cs.inflow.available()) + cs.bufPipe.Len()
if v < transportDefaultStreamFlow-transportDefaultStreamMinRefresh {
streamAdd = int32(transportDefaultStreamFlow - v)
cs.inflow.add(streamAdd)
}
}
cc.mu.Unlock()
if connAdd != 0 || streamAdd != 0 {
cc.wmu.Lock()
defer cc.wmu.Unlock()
if connAdd != 0 {
cc.fr.WriteWindowUpdate(0, mustUint31(connAdd))
}
if streamAdd != 0 {
cc.fr.WriteWindowUpdate(cs.ID, mustUint31(streamAdd))
}
cc.bw.Flush()
}
return
}
var errClosedResponseBody = errors.New("http2: response body closed")
func (b transportResponseBody) Close() error {
cs := b.cs
cc := cs.cc
unread := cs.bufPipe.Len()
if unread > 0 {
cc.mu.Lock()
// Return connection-level flow control.
if unread > 0 {
cc.inflow.add(int32(unread))
}
cc.mu.Unlock()
// TODO(dneil): Acquiring this mutex can block indefinitely.
// Move flow control return to a goroutine?
cc.wmu.Lock()
// Return connection-level flow control.
if unread > 0 {
cc.fr.WriteWindowUpdate(0, uint32(unread))
}
cc.bw.Flush()
cc.wmu.Unlock()
}
cs.bufPipe.BreakWithError(errClosedResponseBody)
cs.abortStream(errClosedResponseBody)
select {
case <-cs.donec:
case <-cs.ctx.Done():
return cs.ctx.Err()
case <-cs.reqCancel:
return errRequestCanceled
}
return nil
}
func (rl *clientConnReadLoop) processData(f *DataFrame) error {
cc := rl.cc
cs := rl.streamByID(f.StreamID)
data := f.Data()
if cs == nil {
cc.mu.Lock()
neverSent := cc.nextStreamID
cc.mu.Unlock()
if f.StreamID >= neverSent {
// We never asked for this.
cc.logf("http2: Transport received unsolicited DATA frame; closing connection")
return ConnectionError(ErrCodeProtocol)
}
// We probably did ask for this, but canceled. Just ignore it.
// TODO: be stricter here? only silently ignore things which
// we canceled, but not things which were closed normally
// by the peer? Tough without accumulating too much state.
// But at least return their flow control:
if f.Length > 0 {
cc.mu.Lock()
cc.inflow.add(int32(f.Length))
cc.mu.Unlock()
cc.wmu.Lock()
cc.fr.WriteWindowUpdate(0, uint32(f.Length))
cc.bw.Flush()
cc.wmu.Unlock()
}
return nil
}
if cs.readClosed {
cc.logf("protocol error: received DATA after END_STREAM")
rl.endStreamError(cs, StreamError{
StreamID: f.StreamID,
Code: ErrCodeProtocol,
})
return nil
}
if !cs.firstByte {
cc.logf("protocol error: received DATA before a HEADERS frame")
rl.endStreamError(cs, StreamError{
StreamID: f.StreamID,
Code: ErrCodeProtocol,
})
return nil
}
if f.Length > 0 {
if cs.isHead && len(data) > 0 {
cc.logf("protocol error: received DATA on a HEAD request")
rl.endStreamError(cs, StreamError{
StreamID: f.StreamID,
Code: ErrCodeProtocol,
})
return nil
}
// Check connection-level flow control.
cc.mu.Lock()
if cs.inflow.available() >= int32(f.Length) {
cs.inflow.take(int32(f.Length))
} else {
cc.mu.Unlock()
return ConnectionError(ErrCodeFlowControl)
}
// Return any padded flow control now, since we won't
// refund it later on body reads.
var refund int
if pad := int(f.Length) - len(data); pad > 0 {
refund += pad
}
didReset := false
var err error
if len(data) > 0 {
if _, err = cs.bufPipe.Write(data); err != nil {
// Return len(data) now if the stream is already closed,
// since data will never be read.
didReset = true
refund += len(data)
}
}
if refund > 0 {
cc.inflow.add(int32(refund))
if !didReset {
cs.inflow.add(int32(refund))
}
}
cc.mu.Unlock()
if refund > 0 {
cc.wmu.Lock()
cc.fr.WriteWindowUpdate(0, uint32(refund))
if !didReset {
cc.fr.WriteWindowUpdate(cs.ID, uint32(refund))
}
cc.bw.Flush()
cc.wmu.Unlock()
}
if err != nil {
rl.endStreamError(cs, err)
return nil
}
}
if f.StreamEnded() {
rl.endStream(cs)
}
return nil
}
func (rl *clientConnReadLoop) endStream(cs *clientStream) {
// TODO: check that any declared content-length matches, like
// server.go's (*stream).endStream method.
if !cs.readClosed {
cs.readClosed = true
cs.bufPipe.closeWithErrorAndCode(io.EOF, cs.copyTrailers)
close(cs.peerClosed)
}
}
func (rl *clientConnReadLoop) endStreamError(cs *clientStream, err error) {
cs.readAborted = true
cs.abortStream(err)
}
func (rl *clientConnReadLoop) streamByID(id uint32) *clientStream {
rl.cc.mu.Lock()
defer rl.cc.mu.Unlock()
cs := rl.cc.streams[id]
if cs != nil && !cs.readAborted {
return cs
}
return nil
}
func (cs *clientStream) copyTrailers() {
for k, vv := range cs.trailer {
t := cs.resTrailer
if *t == nil {
*t = make(http.Header)
}
(*t)[k] = vv
}
}
func (rl *clientConnReadLoop) processGoAway(f *GoAwayFrame) error {
cc := rl.cc
cc.t.connPool().MarkDead(cc)
if f.ErrCode != 0 {
// TODO: deal with GOAWAY more. particularly the error code
cc.vlogf("transport got GOAWAY with error code = %v", f.ErrCode)
if fn := cc.t.CountError; fn != nil {
fn("recv_goaway_" + f.ErrCode.stringToken())
}
}
cc.setGoAway(f)
return nil
}
func (rl *clientConnReadLoop) processSettings(f *SettingsFrame) error {
cc := rl.cc
// Locking both mu and wmu here allows frame encoding to read settings with only wmu held.
// Acquiring wmu when f.IsAck() is unnecessary, but convenient and mostly harmless.
cc.wmu.Lock()
defer cc.wmu.Unlock()
if err := rl.processSettingsNoWrite(f); err != nil {
return err
}
if !f.IsAck() {
cc.fr.WriteSettingsAck()
cc.bw.Flush()
}
return nil
}
func (rl *clientConnReadLoop) processSettingsNoWrite(f *SettingsFrame) error {
cc := rl.cc
cc.mu.Lock()
defer cc.mu.Unlock()
if f.IsAck() {
if cc.wantSettingsAck {
cc.wantSettingsAck = false
return nil
}
return ConnectionError(ErrCodeProtocol)
}
var seenMaxConcurrentStreams bool
err := f.ForeachSetting(func(s Setting) error {
switch s.ID {
case SettingMaxFrameSize:
cc.maxFrameSize = s.Val
case SettingMaxConcurrentStreams:
cc.maxConcurrentStreams = s.Val
seenMaxConcurrentStreams = true
case SettingMaxHeaderListSize:
cc.peerMaxHeaderListSize = uint64(s.Val)
case SettingInitialWindowSize:
// Values above the maximum flow-control
// window size of 2^31-1 MUST be treated as a
// connection error (Section 5.4.1) of type
// FLOW_CONTROL_ERROR.
if s.Val > math.MaxInt32 {
return ConnectionError(ErrCodeFlowControl)
}
// Adjust flow control of currently-open
// frames by the difference of the old initial
// window size and this one.
delta := int32(s.Val) - int32(cc.initialWindowSize)
for _, cs := range cc.streams {
cs.flow.add(delta)
}
cc.cond.Broadcast()
cc.initialWindowSize = s.Val
default:
// TODO(bradfitz): handle more settings? SETTINGS_HEADER_TABLE_SIZE probably.
cc.vlogf("Unhandled Setting: %v", s)
}
return nil
})
if err != nil {
return err
}
if !cc.seenSettings {
if !seenMaxConcurrentStreams {
// This was the servers initial SETTINGS frame and it
// didn't contain a MAX_CONCURRENT_STREAMS field so
// increase the number of concurrent streams this
// connection can establish to our default.
cc.maxConcurrentStreams = defaultMaxConcurrentStreams
}
cc.seenSettings = true
}
return nil
}
func (rl *clientConnReadLoop) processWindowUpdate(f *WindowUpdateFrame) error {
cc := rl.cc
cs := rl.streamByID(f.StreamID)
if f.StreamID != 0 && cs == nil {
return nil
}
cc.mu.Lock()
defer cc.mu.Unlock()
fl := &cc.flow
if cs != nil {
fl = &cs.flow
}
if !fl.add(int32(f.Increment)) {
return ConnectionError(ErrCodeFlowControl)
}
cc.cond.Broadcast()
return nil
}
func (rl *clientConnReadLoop) processResetStream(f *RSTStreamFrame) error {
cs := rl.streamByID(f.StreamID)
if cs == nil {
// TODO: return error if server tries to RST_STREAM an idle stream
return nil
}
serr := streamError(cs.ID, f.ErrCode)
serr.Cause = errFromPeer
if f.ErrCode == ErrCodeProtocol {
rl.cc.SetDoNotReuse()
}
if fn := cs.cc.t.CountError; fn != nil {
fn("recv_rststream_" + f.ErrCode.stringToken())
}
cs.abortStream(serr)
cs.bufPipe.CloseWithError(serr)
return nil
}
// Ping sends a PING frame to the server and waits for the ack.
func (cc *ClientConn) Ping(ctx context.Context) error {
c := make(chan struct{})
// Generate a random payload
var p [8]byte
for {
if _, err := rand.Read(p[:]); err != nil {
return err
}
cc.mu.Lock()
// check for dup before insert
if _, found := cc.pings[p]; !found {
cc.pings[p] = c
cc.mu.Unlock()
break
}
cc.mu.Unlock()
}
errc := make(chan error, 1)
go func() {
cc.wmu.Lock()
defer cc.wmu.Unlock()
if err := cc.fr.WritePing(false, p); err != nil {
errc <- err
return
}
if err := cc.bw.Flush(); err != nil {
errc <- err
return
}
}()
select {
case <-c:
return nil
case err := <-errc:
return err
case <-ctx.Done():
return ctx.Err()
case <-cc.readerDone:
// connection closed
return cc.readerErr
}
}
func (rl *clientConnReadLoop) processPing(f *PingFrame) error {
if f.IsAck() {
cc := rl.cc
cc.mu.Lock()
defer cc.mu.Unlock()
// If ack, notify listener if any
if c, ok := cc.pings[f.Data]; ok {
close(c)
delete(cc.pings, f.Data)
}
return nil
}
cc := rl.cc
cc.wmu.Lock()
defer cc.wmu.Unlock()
if err := cc.fr.WritePing(true, f.Data); err != nil {
return err
}
return cc.bw.Flush()
}
func (rl *clientConnReadLoop) processPushPromise(f *PushPromiseFrame) error {
// We told the peer we don't want them.
// Spec says:
// "PUSH_PROMISE MUST NOT be sent if the SETTINGS_ENABLE_PUSH
// setting of the peer endpoint is set to 0. An endpoint that
// has set this setting and has received acknowledgement MUST
// treat the receipt of a PUSH_PROMISE frame as a connection
// error (Section 5.4.1) of type PROTOCOL_ERROR."
return ConnectionError(ErrCodeProtocol)
}
func (cc *ClientConn) writeStreamReset(streamID uint32, code ErrCode, err error) {
// TODO: map err to more interesting error codes, once the
// HTTP community comes up with some. But currently for
// RST_STREAM there's no equivalent to GOAWAY frame's debug
// data, and the error codes are all pretty vague ("cancel").
cc.wmu.Lock()
cc.fr.WriteRSTStream(streamID, code)
cc.bw.Flush()
cc.wmu.Unlock()
}
var (
errResponseHeaderListSize = errors.New("http2: response header list larger than advertised limit")
errRequestHeaderListSize = errors.New("http2: request header list larger than peer's advertised limit")
)
func (cc *ClientConn) logf(format string, args ...interface{}) {
cc.t.logf(format, args...)
}
func (cc *ClientConn) vlogf(format string, args ...interface{}) {
cc.t.vlogf(format, args...)
}
func (t *Transport) vlogf(format string, args ...interface{}) {
if VerboseLogs {
t.logf(format, args...)
}
}
func (t *Transport) logf(format string, args ...interface{}) {
log.Printf(format, args...)
}
var noBody io.ReadCloser = ioutil.NopCloser(bytes.NewReader(nil))
type missingBody struct{}
func (missingBody) Close() error { return nil }
func (missingBody) Read([]byte) (int, error) { return 0, io.ErrUnexpectedEOF }
func strSliceContains(ss []string, s string) bool {
for _, v := range ss {
if v == s {
return true
}
}
return false
}
type erringRoundTripper struct{ err error }
func (rt erringRoundTripper) RoundTripErr() error { return rt.err }
func (rt erringRoundTripper) RoundTrip(*http.Request) (*http.Response, error) { return nil, rt.err }
// gzipReader wraps a response body so it can lazily
// call gzip.NewReader on the first call to Read
type gzipReader struct {
_ incomparable
body io.ReadCloser // underlying Response.Body
zr *gzip.Reader // lazily-initialized gzip reader
zerr error // sticky error
}
func (gz *gzipReader) Read(p []byte) (n int, err error) {
if gz.zerr != nil {
return 0, gz.zerr
}
if gz.zr == nil {
gz.zr, err = gzip.NewReader(gz.body)
if err != nil {
gz.zerr = err
return 0, err
}
}
return gz.zr.Read(p)
}
func (gz *gzipReader) Close() error {
return gz.body.Close()
}
type errorReader struct{ err error }
func (r errorReader) Read(p []byte) (int, error) { return 0, r.err }
// isConnectionCloseRequest reports whether req should use its own
// connection for a single request and then close the connection.
func isConnectionCloseRequest(req *http.Request) bool {
return req.Close || httpguts.HeaderValuesContainsToken(req.Header["Connection"], "close")
}
// registerHTTPSProtocol calls Transport.RegisterProtocol but
// converting panics into errors.
func registerHTTPSProtocol(t *http.Transport, rt noDialH2RoundTripper) (err error) {
defer func() {
if e := recover(); e != nil {
err = fmt.Errorf("%v", e)
}
}()
t.RegisterProtocol("https", rt)
return nil
}
// noDialH2RoundTripper is a RoundTripper which only tries to complete the request
// if there's already has a cached connection to the host.
// (The field is exported so it can be accessed via reflect from net/http; tested
// by TestNoDialH2RoundTripperType)
type noDialH2RoundTripper struct{ *Transport }
func (rt noDialH2RoundTripper) RoundTrip(req *http.Request) (*http.Response, error) {
res, err := rt.Transport.RoundTrip(req)
if isNoCachedConnError(err) {
return nil, http.ErrSkipAltProtocol
}
return res, err
}
func (t *Transport) idleConnTimeout() time.Duration {
if t.t1 != nil {
return t.t1.IdleConnTimeout
}
return 0
}
func traceGetConn(req *http.Request, hostPort string) {
trace := httptrace.ContextClientTrace(req.Context())
if trace == nil || trace.GetConn == nil {
return
}
trace.GetConn(hostPort)
}
func traceGotConn(req *http.Request, cc *ClientConn, reused bool) {
trace := httptrace.ContextClientTrace(req.Context())
if trace == nil || trace.GotConn == nil {
return
}
ci := httptrace.GotConnInfo{Conn: cc.tconn}
ci.Reused = reused
cc.mu.Lock()
ci.WasIdle = len(cc.streams) == 0 && reused
if ci.WasIdle && !cc.lastActive.IsZero() {
ci.IdleTime = time.Now().Sub(cc.lastActive)
}
cc.mu.Unlock()
trace.GotConn(ci)
}
func traceWroteHeaders(trace *httptrace.ClientTrace) {
if trace != nil && trace.WroteHeaders != nil {
trace.WroteHeaders()
}
}
func traceGot100Continue(trace *httptrace.ClientTrace) {
if trace != nil && trace.Got100Continue != nil {
trace.Got100Continue()
}
}
func traceWait100Continue(trace *httptrace.ClientTrace) {
if trace != nil && trace.Wait100Continue != nil {
trace.Wait100Continue()
}
}
func traceWroteRequest(trace *httptrace.ClientTrace, err error) {
if trace != nil && trace.WroteRequest != nil {
trace.WroteRequest(httptrace.WroteRequestInfo{Err: err})
}
}
func traceFirstResponseByte(trace *httptrace.ClientTrace) {
if trace != nil && trace.GotFirstResponseByte != nil {
trace.GotFirstResponseByte()
}
}