| // Copyright 2023 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| //go:build go1.21 |
| |
| package quic |
| |
| import ( |
| "encoding/binary" |
| "time" |
| ) |
| |
| // A packetWriter constructs QUIC datagrams. |
| // |
| // A datagram consists of one or more packets. |
| // A packet consists of a header followed by one or more frames. |
| // |
| // Packets are written in three steps: |
| // - startProtectedLongHeaderPacket or start1RTT packet prepare the packet; |
| // - append*Frame appends frames to the payload; and |
| // - finishProtectedLongHeaderPacket or finish1RTT finalize the packet. |
| // |
| // The start functions are efficient, so we can start speculatively |
| // writing a packet before we know whether we have any frames to |
| // put in it. The finish functions will abandon the packet if the |
| // payload contains no data. |
| type packetWriter struct { |
| dgramLim int // max datagram size |
| pktLim int // max packet size |
| pktOff int // offset of the start of the current packet |
| payOff int // offset of the payload of the current packet |
| b []byte |
| sent *sentPacket |
| } |
| |
| // reset prepares to write a datagram of at most lim bytes. |
| func (w *packetWriter) reset(lim int) { |
| if cap(w.b) < lim { |
| w.b = make([]byte, 0, lim) |
| } |
| w.dgramLim = lim |
| w.b = w.b[:0] |
| } |
| |
| // datagram returns the current datagram. |
| func (w *packetWriter) datagram() []byte { |
| return w.b |
| } |
| |
| // payload returns the payload of the current packet. |
| func (w *packetWriter) payload() []byte { |
| return w.b[w.payOff:] |
| } |
| |
| func (w *packetWriter) abandonPacket() { |
| w.b = w.b[:w.payOff] |
| w.sent.reset() |
| } |
| |
| // startProtectedLongHeaderPacket starts writing an Initial, 0-RTT, or Handshake packet. |
| func (w *packetWriter) startProtectedLongHeaderPacket(pnumMaxAcked packetNumber, p longPacket) { |
| if w.sent == nil { |
| w.sent = newSentPacket() |
| } |
| w.pktOff = len(w.b) |
| hdrSize := 1 // packet type |
| hdrSize += 4 // version |
| hdrSize += 1 + len(p.dstConnID) |
| hdrSize += 1 + len(p.srcConnID) |
| switch p.ptype { |
| case packetTypeInitial: |
| hdrSize += sizeVarint(uint64(len(p.extra))) + len(p.extra) |
| } |
| hdrSize += 2 // length, hardcoded to a 2-byte varint |
| pnumOff := len(w.b) + hdrSize |
| hdrSize += packetNumberLength(p.num, pnumMaxAcked) |
| payOff := len(w.b) + hdrSize |
| // Check if we have enough space to hold the packet, including the header, |
| // header protection sample (RFC 9001, section 5.4.2), and encryption overhead. |
| if pnumOff+4+headerProtectionSampleSize+aeadOverhead >= w.dgramLim { |
| // Set the limit on the packet size to be the current write buffer length, |
| // ensuring that any writes to the payload fail. |
| w.payOff = len(w.b) |
| w.pktLim = len(w.b) |
| return |
| } |
| w.payOff = payOff |
| w.pktLim = w.dgramLim - aeadOverhead |
| // We hardcode the payload length field to be 2 bytes, which limits the payload |
| // (including the packet number) to 16383 bytes (the largest 2-byte QUIC varint). |
| // |
| // Most networks don't support datagrams over 1472 bytes, and even Ethernet |
| // jumbo frames are generally only about 9000 bytes. |
| if lim := pnumOff + 16383 - aeadOverhead; lim < w.pktLim { |
| w.pktLim = lim |
| } |
| w.b = w.b[:payOff] |
| } |
| |
| // finishProtectedLongHeaderPacket finishes writing an Initial, 0-RTT, or Handshake packet, |
| // canceling the packet if it contains no payload. |
| // It returns a sentPacket describing the packet, or nil if no packet was written. |
| func (w *packetWriter) finishProtectedLongHeaderPacket(pnumMaxAcked packetNumber, k keys, p longPacket) *sentPacket { |
| if len(w.b) == w.payOff { |
| // The payload is empty, so just abandon the packet. |
| w.b = w.b[:w.pktOff] |
| return nil |
| } |
| pnumLen := packetNumberLength(p.num, pnumMaxAcked) |
| plen := w.padPacketLength(pnumLen) |
| hdr := w.b[:w.pktOff] |
| var typeBits byte |
| switch p.ptype { |
| case packetTypeInitial: |
| typeBits = longPacketTypeInitial |
| case packetType0RTT: |
| typeBits = longPacketType0RTT |
| case packetTypeHandshake: |
| typeBits = longPacketTypeHandshake |
| case packetTypeRetry: |
| typeBits = longPacketTypeRetry |
| } |
| hdr = append(hdr, headerFormLong|fixedBit|typeBits|byte(pnumLen-1)) |
| hdr = binary.BigEndian.AppendUint32(hdr, p.version) |
| hdr = appendUint8Bytes(hdr, p.dstConnID) |
| hdr = appendUint8Bytes(hdr, p.srcConnID) |
| switch p.ptype { |
| case packetTypeInitial: |
| hdr = appendVarintBytes(hdr, p.extra) // token |
| } |
| |
| // Packet length, always encoded as a 2-byte varint. |
| hdr = append(hdr, 0x40|byte(plen>>8), byte(plen)) |
| |
| pnumOff := len(hdr) |
| hdr = appendPacketNumber(hdr, p.num, pnumMaxAcked) |
| |
| return w.protect(hdr[w.pktOff:], p.num, pnumOff, k) |
| } |
| |
| // start1RTTPacket starts writing a 1-RTT (short header) packet. |
| func (w *packetWriter) start1RTTPacket(pnum, pnumMaxAcked packetNumber, dstConnID []byte) { |
| if w.sent == nil { |
| w.sent = newSentPacket() |
| } |
| w.pktOff = len(w.b) |
| hdrSize := 1 // packet type |
| hdrSize += len(dstConnID) |
| // Ensure we have enough space to hold the packet, including the header, |
| // header protection sample (RFC 9001, section 5.4.2), and encryption overhead. |
| if len(w.b)+hdrSize+4+headerProtectionSampleSize+aeadOverhead >= w.dgramLim { |
| w.payOff = len(w.b) |
| w.pktLim = len(w.b) |
| return |
| } |
| hdrSize += packetNumberLength(pnum, pnumMaxAcked) |
| w.payOff = len(w.b) + hdrSize |
| w.pktLim = w.dgramLim - aeadOverhead |
| w.b = w.b[:w.payOff] |
| } |
| |
| // finish1RTTPacket finishes writing a 1-RTT packet, |
| // canceling the packet if it contains no payload. |
| // It returns a sentPacket describing the packet, or nil if no packet was written. |
| func (w *packetWriter) finish1RTTPacket(pnum, pnumMaxAcked packetNumber, dstConnID []byte, k keys) *sentPacket { |
| if len(w.b) == w.payOff { |
| // The payload is empty, so just abandon the packet. |
| w.b = w.b[:w.pktOff] |
| return nil |
| } |
| // TODO: Spin |
| // TODO: Key phase |
| pnumLen := packetNumberLength(pnum, pnumMaxAcked) |
| hdr := w.b[:w.pktOff] |
| hdr = append(hdr, 0x40|byte(pnumLen-1)) |
| hdr = append(hdr, dstConnID...) |
| pnumOff := len(hdr) |
| hdr = appendPacketNumber(hdr, pnum, pnumMaxAcked) |
| w.padPacketLength(pnumLen) |
| return w.protect(hdr[w.pktOff:], pnum, pnumOff, k) |
| } |
| |
| // padPacketLength pads out the payload of the current packet to the minimum size, |
| // and returns the combined length of the packet number and payload (used for the Length |
| // field of long header packets). |
| func (w *packetWriter) padPacketLength(pnumLen int) int { |
| plen := len(w.b) - w.payOff + pnumLen + aeadOverhead |
| // "To ensure that sufficient data is available for sampling, packets are |
| // padded so that the combined lengths of the encoded packet number and |
| // protected payload is at least 4 bytes longer than the sample required |
| // for header protection." |
| // https://www.rfc-editor.org/rfc/rfc9001.html#section-5.4.2 |
| for plen < 4+headerProtectionSampleSize { |
| w.b = append(w.b, 0) |
| plen++ |
| } |
| return plen |
| } |
| |
| // protect applies packet protection and finishes the current packet. |
| func (w *packetWriter) protect(hdr []byte, pnum packetNumber, pnumOff int, k keys) *sentPacket { |
| k.protect(hdr, w.b[w.pktOff+len(hdr):], pnumOff-w.pktOff, pnum) |
| w.b = w.b[:len(w.b)+aeadOverhead] |
| w.sent.size = len(w.b) - w.pktOff |
| w.sent.num = pnum |
| sent := w.sent |
| w.sent = nil |
| return sent |
| } |
| |
| // avail reports how many more bytes may be written to the current packet. |
| func (w *packetWriter) avail() int { |
| return w.pktLim - len(w.b) |
| } |
| |
| // appendPaddingTo appends PADDING frames until the total datagram size |
| // (including AEAD overhead of the current packet) is n. |
| func (w *packetWriter) appendPaddingTo(n int) { |
| n -= aeadOverhead |
| lim := w.pktLim |
| if n < lim { |
| lim = n |
| } |
| if len(w.b) >= lim { |
| return |
| } |
| for len(w.b) < lim { |
| w.b = append(w.b, frameTypePadding) |
| } |
| // Packets are considered in flight when they contain a PADDING frame. |
| // https://www.rfc-editor.org/rfc/rfc9002.html#section-2-3.6.1 |
| w.sent.inFlight = true |
| } |
| |
| func (w *packetWriter) appendPingFrame() (added bool) { |
| if len(w.b) >= w.pktLim { |
| return false |
| } |
| w.b = append(w.b, frameTypePing) |
| w.sent.appendAckElicitingFrame(frameTypePing) |
| return true |
| } |
| |
| // appendAckFrame appends an ACK frame to the payload. |
| // It includes at least the most recent range in the rangeset |
| // (the range with the largest packet numbers), |
| // followed by as many additional ranges as fit within the packet. |
| // |
| // We always place ACK frames at the start of packets, |
| // we limit the number of ack ranges retained, and |
| // we set a minimum packet payload size. |
| // As a result, appendAckFrame will rarely if ever drop ranges |
| // in practice. |
| // |
| // In the event that ranges are dropped, the impact is limited |
| // to the peer potentially failing to receive an acknowledgement |
| // for an older packet during a period of high packet loss or |
| // reordering. This may result in unnecessary retransmissions. |
| func (w *packetWriter) appendAckFrame(seen rangeset[packetNumber], ackDelayExponent uint8, delay time.Duration) (added bool) { |
| if len(seen) == 0 { |
| return false |
| } |
| var ( |
| largest = uint64(seen.max()) |
| mdelay = uint64(delay.Microseconds() / (1 << ackDelayExponent)) |
| firstRange = uint64(seen[len(seen)-1].size() - 1) |
| ) |
| if w.avail() < 1+sizeVarint(largest)+sizeVarint(mdelay)+1+sizeVarint(firstRange) { |
| return false |
| } |
| w.b = append(w.b, frameTypeAck) |
| w.b = appendVarint(w.b, largest) |
| w.b = appendVarint(w.b, mdelay) |
| // The range count is technically a varint, but we'll reserve a single byte for it |
| // and never add more than 62 ranges (the maximum varint that fits in a byte). |
| rangeCountOff := len(w.b) |
| w.b = append(w.b, 0) |
| w.b = appendVarint(w.b, firstRange) |
| rangeCount := byte(0) |
| for i := len(seen) - 2; i >= 0; i-- { |
| gap := uint64(seen[i+1].start - seen[i].end - 1) |
| size := uint64(seen[i].size() - 1) |
| if w.avail() < sizeVarint(gap)+sizeVarint(size) || rangeCount > 62 { |
| break |
| } |
| w.b = appendVarint(w.b, gap) |
| w.b = appendVarint(w.b, size) |
| rangeCount++ |
| } |
| w.b[rangeCountOff] = rangeCount |
| w.sent.appendNonAckElicitingFrame(frameTypeAck) |
| w.sent.appendInt(uint64(seen.max())) |
| return true |
| } |
| |
| func (w *packetWriter) appendNewTokenFrame(token []byte) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(len(token)))+len(token) { |
| return false |
| } |
| w.b = append(w.b, frameTypeNewToken) |
| w.b = appendVarintBytes(w.b, token) |
| return true |
| } |
| |
| func (w *packetWriter) appendResetStreamFrame(id streamID, code uint64, finalSize int64) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(id))+sizeVarint(code)+sizeVarint(uint64(finalSize)) { |
| return false |
| } |
| w.b = append(w.b, frameTypeResetStream) |
| w.b = appendVarint(w.b, uint64(id)) |
| w.b = appendVarint(w.b, code) |
| w.b = appendVarint(w.b, uint64(finalSize)) |
| w.sent.appendAckElicitingFrame(frameTypeResetStream) |
| w.sent.appendInt(uint64(id)) |
| return true |
| } |
| |
| func (w *packetWriter) appendStopSendingFrame(id streamID, code uint64) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(id))+sizeVarint(code) { |
| return false |
| } |
| w.b = append(w.b, frameTypeStopSending) |
| w.b = appendVarint(w.b, uint64(id)) |
| w.b = appendVarint(w.b, code) |
| w.sent.appendAckElicitingFrame(frameTypeStopSending) |
| w.sent.appendInt(uint64(id)) |
| return true |
| } |
| |
| // appendCryptoFrame appends a CRYPTO frame. |
| // It returns a []byte into which the data should be written and whether a frame was added. |
| // The returned []byte may be smaller than size if the packet cannot hold all the data. |
| func (w *packetWriter) appendCryptoFrame(off int64, size int) (_ []byte, added bool) { |
| max := w.avail() |
| max -= 1 // frame type |
| max -= sizeVarint(uint64(off)) // offset |
| max -= sizeVarint(uint64(size)) // maximum length |
| if max <= 0 { |
| return nil, false |
| } |
| if max < size { |
| size = max |
| } |
| w.b = append(w.b, frameTypeCrypto) |
| w.b = appendVarint(w.b, uint64(off)) |
| w.b = appendVarint(w.b, uint64(size)) |
| start := len(w.b) |
| w.b = w.b[:start+size] |
| w.sent.appendAckElicitingFrame(frameTypeCrypto) |
| w.sent.appendOffAndSize(off, size) |
| return w.b[start:][:size], true |
| } |
| |
| // appendStreamFrame appends a STREAM frame. |
| // It returns a []byte into which the data should be written and whether a frame was added. |
| // The returned []byte may be smaller than size if the packet cannot hold all the data. |
| func (w *packetWriter) appendStreamFrame(id streamID, off int64, size int, fin bool) (_ []byte, added bool) { |
| typ := uint8(frameTypeStreamBase | streamLenBit) |
| max := w.avail() |
| max -= 1 // frame type |
| max -= sizeVarint(uint64(id)) |
| if off != 0 { |
| max -= sizeVarint(uint64(off)) |
| typ |= streamOffBit |
| } |
| max -= sizeVarint(uint64(size)) // maximum length |
| if max < 0 || (max == 0 && size > 0) { |
| return nil, false |
| } |
| if max < size { |
| size = max |
| } else if fin { |
| typ |= streamFinBit |
| } |
| w.b = append(w.b, typ) |
| w.b = appendVarint(w.b, uint64(id)) |
| if off != 0 { |
| w.b = appendVarint(w.b, uint64(off)) |
| } |
| w.b = appendVarint(w.b, uint64(size)) |
| start := len(w.b) |
| w.b = w.b[:start+size] |
| if fin { |
| w.sent.appendAckElicitingFrame(frameTypeStreamBase | streamFinBit) |
| } else { |
| w.sent.appendAckElicitingFrame(frameTypeStreamBase) |
| } |
| w.sent.appendInt(uint64(id)) |
| w.sent.appendOffAndSize(off, size) |
| return w.b[start:][:size], true |
| } |
| |
| func (w *packetWriter) appendMaxDataFrame(max int64) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(max)) { |
| return false |
| } |
| w.b = append(w.b, frameTypeMaxData) |
| w.b = appendVarint(w.b, uint64(max)) |
| w.sent.appendAckElicitingFrame(frameTypeMaxData) |
| return true |
| } |
| |
| func (w *packetWriter) appendMaxStreamDataFrame(id streamID, max int64) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(id))+sizeVarint(uint64(max)) { |
| return false |
| } |
| w.b = append(w.b, frameTypeMaxStreamData) |
| w.b = appendVarint(w.b, uint64(id)) |
| w.b = appendVarint(w.b, uint64(max)) |
| w.sent.appendAckElicitingFrame(frameTypeMaxStreamData) |
| w.sent.appendInt(uint64(id)) |
| return true |
| } |
| |
| func (w *packetWriter) appendMaxStreamsFrame(streamType streamType, max int64) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(max)) { |
| return false |
| } |
| var typ byte |
| if streamType == bidiStream { |
| typ = frameTypeMaxStreamsBidi |
| } else { |
| typ = frameTypeMaxStreamsUni |
| } |
| w.b = append(w.b, typ) |
| w.b = appendVarint(w.b, uint64(max)) |
| w.sent.appendAckElicitingFrame(typ) |
| return true |
| } |
| |
| func (w *packetWriter) appendDataBlockedFrame(max int64) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(max)) { |
| return false |
| } |
| w.b = append(w.b, frameTypeDataBlocked) |
| w.b = appendVarint(w.b, uint64(max)) |
| w.sent.appendAckElicitingFrame(frameTypeDataBlocked) |
| return true |
| } |
| |
| func (w *packetWriter) appendStreamDataBlockedFrame(id streamID, max int64) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(id))+sizeVarint(uint64(max)) { |
| return false |
| } |
| w.b = append(w.b, frameTypeStreamDataBlocked) |
| w.b = appendVarint(w.b, uint64(id)) |
| w.b = appendVarint(w.b, uint64(max)) |
| w.sent.appendAckElicitingFrame(frameTypeStreamDataBlocked) |
| w.sent.appendInt(uint64(id)) |
| return true |
| } |
| |
| func (w *packetWriter) appendStreamsBlockedFrame(typ streamType, max int64) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(max)) { |
| return false |
| } |
| var ftype byte |
| if typ == bidiStream { |
| ftype = frameTypeStreamsBlockedBidi |
| } else { |
| ftype = frameTypeStreamsBlockedUni |
| } |
| w.b = append(w.b, ftype) |
| w.b = appendVarint(w.b, uint64(max)) |
| w.sent.appendAckElicitingFrame(ftype) |
| return true |
| } |
| |
| func (w *packetWriter) appendNewConnectionIDFrame(seq, retirePriorTo int64, connID []byte, token [16]byte) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(seq))+sizeVarint(uint64(retirePriorTo))+1+len(connID)+len(token) { |
| return false |
| } |
| w.b = append(w.b, frameTypeNewConnectionID) |
| w.b = appendVarint(w.b, uint64(seq)) |
| w.b = appendVarint(w.b, uint64(retirePriorTo)) |
| w.b = appendUint8Bytes(w.b, connID) |
| w.b = append(w.b, token[:]...) |
| w.sent.appendAckElicitingFrame(frameTypeNewConnectionID) |
| w.sent.appendInt(uint64(seq)) |
| return true |
| } |
| |
| func (w *packetWriter) appendRetireConnectionIDFrame(seq uint64) (added bool) { |
| if w.avail() < 1+sizeVarint(seq) { |
| return false |
| } |
| w.b = append(w.b, frameTypeRetireConnectionID) |
| w.b = appendVarint(w.b, seq) |
| w.sent.appendAckElicitingFrame(frameTypeRetireConnectionID) |
| return true |
| } |
| |
| func (w *packetWriter) appendPathChallengeFrame(data uint64) (added bool) { |
| if w.avail() < 1+8 { |
| return false |
| } |
| w.b = append(w.b, frameTypePathChallenge) |
| w.b = binary.BigEndian.AppendUint64(w.b, data) |
| w.sent.appendAckElicitingFrame(frameTypePathChallenge) |
| return true |
| } |
| |
| func (w *packetWriter) appendPathResponseFrame(data uint64) (added bool) { |
| if w.avail() < 1+8 { |
| return false |
| } |
| w.b = append(w.b, frameTypePathResponse) |
| w.b = binary.BigEndian.AppendUint64(w.b, data) |
| w.sent.appendAckElicitingFrame(frameTypePathResponse) |
| return true |
| } |
| |
| // appendConnectionCloseTransportFrame appends a CONNECTION_CLOSE frame |
| // carrying a transport error code. |
| func (w *packetWriter) appendConnectionCloseTransportFrame(code transportError, frameType uint64, reason string) (added bool) { |
| if w.avail() < 1+sizeVarint(uint64(code))+sizeVarint(frameType)+sizeVarint(uint64(len(reason)))+len(reason) { |
| return false |
| } |
| w.b = append(w.b, frameTypeConnectionCloseTransport) |
| w.b = appendVarint(w.b, uint64(code)) |
| w.b = appendVarint(w.b, frameType) |
| w.b = appendVarintBytes(w.b, []byte(reason)) |
| // We don't record CONNECTION_CLOSE frames in w.sent, since they are never acked or |
| // detected as lost. |
| return true |
| } |
| |
| // appendConnectionCloseTransportFrame appends a CONNECTION_CLOSE frame |
| // carrying an application protocol error code. |
| func (w *packetWriter) appendConnectionCloseApplicationFrame(code uint64, reason string) (added bool) { |
| if w.avail() < 1+sizeVarint(code)+sizeVarint(uint64(len(reason)))+len(reason) { |
| return false |
| } |
| w.b = append(w.b, frameTypeConnectionCloseApplication) |
| w.b = appendVarint(w.b, code) |
| w.b = appendVarintBytes(w.b, []byte(reason)) |
| // We don't record CONNECTION_CLOSE frames in w.sent, since they are never acked or |
| // detected as lost. |
| return true |
| } |
| |
| func (w *packetWriter) appendHandshakeDoneFrame() (added bool) { |
| if w.avail() < 1 { |
| return false |
| } |
| w.b = append(w.b, frameTypeHandshakeDone) |
| w.sent.appendAckElicitingFrame(frameTypeHandshakeDone) |
| return true |
| } |