libgo/testsuite/gotest - gofrontend - Git at Google

 #!/bin/sh
 # Copyright 2009 The Go Authors. All rights reserved.
 # Use of this source code is governed by a BSD-style
 # license that can be found in the LICENSE file.

 # Using all the *_test.go files in the current directory, write out a file
 # _testmain.go that runs all its tests. Compile everything and run the
 # tests.
 # If files are named on the command line, use them instead of *_test.go.

 # Makes egrep,grep work better in general if we put them
 # in ordinary C mode instead of what the current language is.
 LANG=C
 LC_ALL=C
 LC_CTYPE=C
 export LANG LC_ALL LC_CTYPE

 GC=${GC:-gccgo}
 GL=${GL:-${GC-gccgo}}
 GOLIBS=${GOLIBS:-}
 export GC GL GOLIBS

 NM=${NM:-nm}

 # srcdir is where the source files are found.  basedir is where the
 # source file paths are relative to.
 # gofiles are the test files.  pkgfiles are the source files.
 srcdir=.
 basedir=.
 goarch=""
 gofiles=""
 goos=""
 pkgfiles=""
 loop=true
 keep=false
 pkgpath=
 prefix=
 dejagnu=no
 timeout=600
 testname=""
 bench=""
 trace=false
 while $loop; do
 	case "x$1" in
         x--srcdir)
 		srcdir=$2
 		shift
 		shift
 		;;
 	x--srcdir=*)
 		srcdir=`echo $1 | sed -e 's/^--srcdir=//'`
 		shift
 		;;
         x--basedir)
 		basedir=$2
 		shift
 		shift
 		;;
 	x--basedir=*)
 		basedir=`echo $1 | sed -e 's/^--basedir=//'`
 		shift
 		;;
 	x--goarch)
 		goarch=$2
 		shift
 		shift
 		;;
 	x--goarch=*)
 		goarch=`echo $1 | sed -e 's/^--goarch=//'`
 		shift
 		;;
 	x--goos)
 		goos=$2
 		shift
 		shift
 		;;
 	x--goos=*)
 		goos=`echo $1 | sed -e 's/^--goos=//'`
 		shift
 		;;
 	x--pkgpath)
 		pkgpath=$2
 		shift
 		shift
 		;;
 	x--pkgpath=*)
 		pkgpath=`echo $1 | sed -e 's/^--pkgpath=//'`
 		shift
 		;;
 	x--prefix)
 		prefix=$2
 		shift
 		shift
 		;;
 	x--prefix=*)
 		prefix=`echo $1 | sed -e 's/^--prefix=//'`
 		shift
 		;;
 	x--keep)
 		keep=true
                 shift
 		;;
 	x--pkgfiles)
 		pkgfiles=$2
 		shift
 		shift
 		;;
 	x--pkgfiles=*)
 		pkgfiles=`echo $1 | sed -e 's/^--pkgfiles=//'`
 		shift
 		;;
 	x--dejagnu)
 		dejagnu=$2
 		shift
 		shift
 		;;
 	x--dejagnu=*)
 		dejagnu=`echo $1 | sed -e 's/^--dejagnu=//'`
 		shift
 		;;
 	x--timeout)
 		timeout=$2
 		shift
 		shift
 		;;
 	x--timeout=*)
 		timeout=`echo $1 | sed -e 's/^--timeout=//'`
 		shift
 		;;
 	x--testname)
 		testname=$2
 		shift
 		shift
 		;;
 	x--testname=*)
 		testname=`echo $1 | sed -e 's/^--testname=//'`
 		shift
 		;;
 	x--bench)
 		bench=$2
 		shift
 		shift
 		;;
 	x--bench=*)
 		bench=`echo $1 | sed -e 's/^--bench=//'`
 		shift
 		;;
 	x--trace)
 		trace=true
 		shift
 		;;
 	x-*)
 		loop=false
 		;;
 	x)
 		loop=false
 		;;
 	*)
 		gofiles="$gofiles $1"
 		shift
 		;;
 	esac
 done

 DIR=gotest$$
 rm -rf $DIR
 mkdir $DIR

 cd $DIR
 mkdir test
 cd test

 if test $keep = false; then
   trap "cd ../..; rm -rf $DIR" 0 1 2 3 14 15
 else
   trap "cd ../..; echo Keeping $DIR" 0 1 2 3 14 15
 fi

 case "$srcdir" in
 	/*)
 		;;
 	*)
 		srcdir="../../$srcdir"
                 ;;
 esac

 SRCDIR=$srcdir
 export SRCDIR

 case "$basedir" in
 	/*)
 		;;
 	*)
 		basedir="../../$basedir"
                 ;;
 esac

 # Link all the files/directories in srcdir into our working directory,
 # so that the tests do not have to refer to srcdir to find test data.
 ln -s $srcdir/* .

 # Some tests refer to a ../testdata directory.
 if test -e $srcdir/../testdata; then
   rm -f ../testdata
   abssrcdir=`cd $srcdir && pwd`
   ln -s $abssrcdir/../testdata ../testdata
 fi

 # Copy the .go files because io/utils_test.go expects a regular file.
 case "x$gofiles" in
 x)
 	case "x$pkgfiles" in
 	x)
 		for f in `cd $srcdir; ls *.go`; do
 		    rm -f $f;
 		    cp $srcdir/$f .
 		done
 		;;
 	*)
 		for f in $pkgfiles; do
                     case $f in
                     /*)
                         b=`basename $f`
                         rm -f $b
                         cp $f $b
                         ;;
                     *)
 		        if test -f $basedir/$f; then
 			  b=`basename $f`
 			  rm -f $b
 			  cp $basedir/$f $b
 		        elif test -f ../../$f; then
 			  b=`basename $f`
 			  rm -f $b
 			  cp ../../$f $b
 		        else
 			  echo "file $f not found" 1>&2
 			  exit 1
 		        fi
                         ;;
                     esac
 		done
 		for f in `cd $srcdir; ls *_test.go`; do
 		    rm -f $f
 		    cp $srcdir/$f .
 		done
 		;;
 	esac
 	;;
 *)
 	for f in $gofiles; do
 	    b=`basename $f`
 	    rm -f $b
 	    cp $basedir/$f $b
 	done
 	case "x$pkgfiles" in
 	x)
 		for f in `cd $srcdir; ls *.go | grep -v *_test.go`; do
 		    rm -f $f
 		    cp $srcdir/$f .
 		done
 		;;
 	*)
 		for f in $pkgfiles; do
                     case $f in
                     /*)
                         b=`basename $f`
                         rm -f $b
                         cp $f $b
                         ;;
                     *)
 		        if test -f $basedir/$f; then
 			  b=`basename $f`
 			  rm -f $b
 			  cp $basedir/$f $b
 		        elif test -f ../../$f; then
 			  b=`basename $f`
 			  rm -f $b
 			  cp ../../$f $b
 		        else
 			  echo "file $f not found" 1>&2
 			  exit 1
 		        fi
                         ;;
                     esac
 		done
 		;;
 	esac
 	;;
 esac

 case "x$gofiles" in
 x)
 	for f in `ls *_test.go`; do
 	    tag1=`echo $f | sed -e 's/^.*_\([^_]*\)_test.go$/\1/'`
 	    tag2=`echo $f | sed -e 's/^.*_\([^_]*\)_[^_]*_test.go$/\1/'`
 	    if test x$tag1 = x$f; then
 		tag1=
 	    fi
 	    if test x$tag2 = x$f; then
 		tag2=
 	    fi

 	    case "$tag1" in
 	    "") ;;
 	    $goarch) ;;
 	    $goos) ;;
 	    aix | android | darwin | dragonfly | freebsd | hurd | ios | illumos | js | linux | nacl | netbsd | openbsd | plan9 | solaris | windows | zos)
 		tag1=nonmatchingtag
 		;;
 	    386 | amd64 | amd64p32 | arm | armbe | arm64 | arm64be | alpha | ia64 | m68k | mips | mipsle | mips64 | mips64le | mips64p32 | mips64p32le | nios2 | ppc | ppc64 | ppc64le | riscv | riscv64 | s390 | s390x | sh | shbe | sparc | sparc64 | wasm)
 		tag1=nonmatchingtag
 		;;
 	    esac

 	    case "$tag2" in
 	    "") ;;
 	    $goarch) ;;
 	    $goos) ;;
 	    aix | android | darwin | dragonfly | freebsd | hurd | ios | illumos | js | linux | nacl | netbsd | openbsd | plan9 | solaris | windows | zos)
 		tag2=nonmatchingtag
 		;;
 	    386 | amd64 | amd64p32 | arm | armbe | arm64 | arm64be | alpha | ia64 | m68k | mips | mipsle | mips64 | mips64le | mips64p32 | mips64p32le | nios2 | ppc | ppc64 | ppc64le | riscv | riscv64 | s390 | s390x | sh | shbe | sparc | sparc64 | wasm)
 		tag2=nonmatchingtag
 		;;
 	    esac

 	    if test x$tag1 != xnonmatchingtag -a x$tag2 != xnonmatchingtag; then
 		tags=`sed '/^package /q' < $f | grep '^// *+build '`
 		omatch=true
 		first=true
 		match=false
 		for tag in $tags; do
 		    case $tag in
 		    "//")
 			;;
 		    "+build" | "//+build")
 			if test "$first" = "true"; then
 			    first=false
 			elif test "$match" = "false"; then
 			    omatch=false
 			fi
 			match=false
 			;;
 		    $goos | $goarch | cgo | gccgo | go1.[0-9] | go1.[0-9][0-9])
 			match=true
 			;;
 		    "!"$goos | "!"$goarch | "!cgo" | "!gccgo" | "!"go1.[0-9] | "!"go1.1[0-6])
 			;;
 		    *,*)
 			cmatch=true
 			for ctag in `echo $tag | sed -e 's/,/ /g'`; do
 			    case $ctag in
 			    $goos | $goarch | cgo | gccgo | go1.[0-9] | go1.[0-9][0-9])
 				;;
 			    "!"$goos | "!"$goarch | "!cgo" | "!gccgo" | "!"go1.[0-9] | "!"go1.1[0-6])
 				cmatch=false
 				;;
 			    "!"*)
 			        ;;
 			    *)
 				cmatch=false
 				;;
 			    esac
 			done
 			if test "$cmatch" = "true"; then
 			    match=true
 			fi
 			;;
 		    "!"*)
 			match=true
 			;;
 		    esac
 		done

 		if test "$match" = "false" -a "$first" = "false"; then
 		    omatch=false
 		fi

 		if test "$omatch" = "true"; then
 		    gofiles="$gofiles $f"
 		fi
 	    fi
 	done
 	;;
 *)
 	xgofiles=$gofiles
 	gofiles=
 	for f in $xgofiles; do
 	    gofiles="$gofiles `basename $f`"
 	done
 esac

 case "x$gofiles" in
 x)
 	echo 'no test files found' 1>&2
 	exit 1
 	;;
 esac

 case "x$pkgfiles" in
 x)
 	pkgbasefiles=`ls *.go | grep -v _test.go 2>/dev/null`
 	;;
 *)
 	for f in $pkgfiles; do
 	    pkgbasefiles="$pkgbasefiles `basename $f`"
 	done
 	;;
 esac

 case "x$pkgfiles" in
 x)
 	echo 'no source files found' 1>&2
 	exit 1
 	;;
 esac

 # Split $gofiles into external gofiles (those in *_test packages)
 # and internal ones (those in the main package).
 xgofiles=
 xpackage=
 for f in $gofiles; do
     package=`grep '^package[ 	]' $f | sed 1q`
     case "$package" in
     *_test)
 	xpackage=`echo $package | sed -e 's/package[ 	]//' -e 's/[ 	]*$//'`
 	xgofiles="$xgofiles $f"
 	;;
     *)
 	ngofiles="$ngofiles $f"
 	;;
     esac
 done
 gofiles=$ngofiles

 # External $O file
 xofile=""
 havex=false
 if [ "x$xgofiles" != "x" ]; then
 	xofile="_xtest_.o"
 	havex=true
 fi

 testmain=
 if $havex && fgrep 'func TestMain(' $xgofiles >/dev/null 2>&1; then
   package=`grep '^package[ 	]' $xgofiles | sed 1q | sed -e 's/.* //'`
   testmain="${package}.TestMain"
 elif test -n "$gofiles" && fgrep 'func TestMain(' $gofiles >/dev/null 2>&1; then
   package=`grep '^package[ 	]' $gofiles | sed 1q | sed -e 's/.* //'`
   testmain="${package}.TestMain"
 fi

 set -e

 package=`echo ${srcdir} | sed -e 's|^.*libgo/go/||'`

 pkgpatharg=
 xpkgpatharg=
 prefixarg=
 if test -n "$pkgpath"; then
 	pkgpatharg="-fgo-pkgpath=$pkgpath"
 	xpkgpatharg="-fgo-pkgpath=${pkgpath}_test"
 elif test -n "$prefix"; then
 	prefixarg="-fgo-prefix=$prefix"
 fi

 if test "$trace" = "true"; then
   echo $GC -g $pkgpatharg $prefixarg -c -I . -fno-toplevel-reorder -o _gotest_.o $gofiles $pkgbasefiles
 fi
 $GC -g $pkgpatharg $prefixarg -c -I . -fno-toplevel-reorder -o _gotest_.o $gofiles $pkgbasefiles

 if $havex; then
 	mkdir -p `dirname $package`
 	cp _gotest_.o `dirname $package`/lib`basename $package`.a

 	# Force the test version of the package to be imported first,
 	# so that its type definitions will be used, in case any new
 	# methods appear in export_test.go files.
 	echo "package $xpackage" > _first_test.go
 	echo 'import _ "'$package'"' >> _first_test.go

 	if test "$trace" = "true"; then
 	    echo $GC -g $xpkgpatharg -c -I . -fno-toplevel-reorder -o $xofile _first_test.go $xgofiles
 	fi
 	$GC -g $xpkgpatharg -c -I . -fno-toplevel-reorder -o $xofile _first_test.go $xgofiles
 fi

 # They all compile; now generate the code to call them.

 testname() {
 	# Remove the package from the name used with the -test option.
 	echo $1 | sed 's/^.*\.//'
 }

 localname() {
 	# The package main has been renamed to __main__ when imported.
 	# Adjust its uses.
 	# Also demangle underscores.
 	echo $1 | sed 's/^main\./__main__./' | sed 's/__/_/'
 }

 # Takes a list of tests derived from 'nm' output (whose symbols are mangled)
 # and emits a demangled list of tests, using only the terminal package.
 # Example:
 #
 #    Original symbol:   foo/bar/leaf.Mumble
 #    Mangled symbol:    foo_1fbar_1leaf.Mumble
 #    Returned:          leaf.Mumble
 #
 symtogo() {
   result=""
   for tp in $*; do
     # Discard symbols with a leading dot.
     # On AIX, this will remove function text symbols (with a leading dot).
     # Therefore, only function descriptor symbols (without this leading dot)
     # will be used to retrieve the go symbols, avoiding duplication.
     if expr "$tp" : '^\.' >/dev/null 2>&1; then
       continue
     fi
     # Skip type descriptors.  These are normally skipped because they
     # are weak symbols, but if not using GNU nm we may see them here.
     if expr "$tp" : '^type\.\.' >/dev/null 2>&1; then
       continue
     fi
     s=$(echo "$tp" | sed -e 's/_1/%/g' | sed -e 's/.*%//')
     # Screen out methods (X.Y.Z).
     if ! expr "$s" : '^[^.]*\.[^.]*$' >/dev/null 2>&1; then
       continue
     fi
     tname=$(testname $s)
     # Skip TestMain.
     if test x$tname = xTestMain; then
       continue
     fi
     # Check that the function is defined in a test file,
     # not an ordinary non-test file.
     if grep "^func $tname(" $gofiles $xgofiles >/dev/null 2>&1; then
       echo "$s"
     fi
   done
 }

 # Takes an example name and puts any output into the file example.txt.
 # It strips comment markers but does not otherwise change the output.
 exampleoutput() {
     n=$(testname $1)
     for f in $gofiles $xgofiles; do
 	if ! grep "^func $n(" $f >/dev/null 2>&1; then
 	    continue
 	fi
 	# Copy the output comment, if any, into example.txt.
 	# Remove the comment markers.
 	sed -n "/^func $n(/,/^}$/ p" $f |
 	    sed -n '\|// \([Uu]nordered \)\?[Oo]utput:|,$ p' |
 	    sed -n '\|//| s|[ 	]*// \?||p' > example.txt
 	# Check whether we found an output comment.
 	if ! sed -n '1p' < example.txt | grep '[Oo]utput:' >/dev/null 2>&1; then
 	    rm -f example.txt
 	fi
 	return
     done
 }

 {
 	# On systems using PPC64 ELF ABI v1 function symbols show up
 	# as descriptors in the data section.
 	text="[TD]"

 	# test functions are named TestFoo
 	# the grep -v eliminates methods and other special names
 	# that have multiple dots.
 	pattern='Test([^a-z].*)?'
 	# The -p option tells GNU nm not to sort.
 	# The -v option tells Solaris nm to sort by value.
         testsyms=$($NM -p -v _gotest_.o | egrep " $text .*\."$pattern'$' | fgrep -v ' __go_' | egrep -v '\.\.\w+$' | sed 's/.* //')
 	testxsyms=
 	if $havex; then
 	    testxsyms=$($NM -p -v $xofile | egrep " $text .*\."$pattern'$' | fgrep -v ' __go_' | egrep -v '\.\.\w+$' | sed 's/.* //')
 	    testsyms="$testsyms $testxsyms"
 	fi
         tests=$(symtogo "$testsyms")
 	if [ "x$tests" = x ]; then
 		echo 'gotest: warning: no tests matching '$pattern in _gotest_.o $xofile 1>&2
 		exit 2
 	fi
 	# benchmarks are named BenchmarkFoo.
 	pattern='Benchmark([^a-z].*)?'
 	benchmarksyms=$($NM -p -v _gotest_.o | egrep " $text .*\."$pattern'$' | fgrep -v ' __go_' | egrep -v '\.\.\w+$' | sed 's/.* //')
 	if $havex; then
 	    benchmarkxsyms=$($NM -p -v $xofile | egrep " $text .*\."$pattern'$' | fgrep -v ' __go_' | egrep -v '\.\.\w+$' | sed 's/.* //')
 	    benchmarksyms="$benchmarksyms $benchmarkxsyms"
 	fi
         benchmarks=$(symtogo "$benchmarksyms")

 	# examples are named ExampleFoo
 	pattern='Example([^a-z].*)?'
 	examplesyms=$($NM -p -v _gotest_.o | egrep " $text .*\."$pattern'$' | fgrep -v ' __go_' | egrep -v '\.\.\w+$' | sed 's/.* //')
 	if $havex; then
 	    examplexsyms=$($NM -p -v $xofile | egrep " $text .*\."$pattern'$' | fgrep -v ' __go_' | egrep -v '\.\.\w+$' | sed 's/.* //')
 	    examplesyms="$examplesyms $examplexsyms"
 	fi
 	examples=$(symtogo "$examplesyms")

 	# package spec
 	echo 'package main'
 	echo
 	# imports
 	if echo "$tests" | egrep -v '_test\.' >/dev/null; then
 		echo 'import "./_gotest_"'
 	fi
 	if $havex; then
 	    needxtest=false
 	    if test -n "$testxsyms" -o -n "$benchmarkxsyms"; then
 		needxtest=true
 	    else
 		# Check whether any example has output.
 		for i in $(symtogo "$examplexsyms"); do
 		    exampleoutput $i
 		    if test -f example.txt; then
 			rm -f example.txt
 			needxtest=true
 			break
 		    fi
 		done
 	    fi
 	    if test x$needxtest = xtrue; then
 		echo 'import "./_xtest_"'
 	    else
 		echo 'import _ "./_xtest_"'
 	    fi
 	fi
 	if test "$package" != "testing"; then
 		echo 'import "testing"'
 	fi
 	echo 'import "testing/internal/testdeps"'
 	if ! test -n "$testmain"; then
 		echo 'import __os__ "os"'
 	fi
 	# test array
 	echo
 	echo 'var tests = []testing.InternalTest {'
 	for i in $tests; do
 		n=$(testname $i)
 		j=$(localname $i)
 		echo '	{"'$n'", '$j'},'
 	done
 	echo '}'

 	# benchmark array
 	# The comment makes the multiline declaration
 	# gofmt-safe even when there are no benchmarks.
 	echo 'var benchmarks = []testing.InternalBenchmark{'
 	for i in $benchmarks; do
 		n=$(testname $i)
 		j=$(localname $i)
 		echo '	{"'$n'", '$j'},'
 	done
 	echo '}'

 	# examples array
 	echo 'var examples = []testing.InternalExample{'
 	for i in $examples; do
 		n=$(testname $i)
 		j=$(localname $i)
 		# Look for a //output comment.
 		hasoutput=false
 		unordered=false
 		output=
 		exampleoutput $i
 		if ! test -f example.txt; then
 		    continue
 		fi
 		# Check whether the output can be unordered.
 		unordered=false
 		if sed -n '1p' < example.txt | grep -i unordered >/dev/null 2>&1; then
 		    unordered=true
 		fi
 		# Remove the output header.
 		# Quote backslashes.
 		# Quote quotation characters.
 		# Turn tab into \t.
 		# Turn pairs of spaces into " \x20", because $() will
 		# drop duplicate spaces.
 		# Drop trailing spaces, and turn newlines into \n.
 		# Remove leading and trailing \n.
 		sed '1 s/\([Uu]nordered \)\?[Oo]utput:[ 	]*//' < example.txt |
 			     sed -e 's/\\/\\\\/g' \
 				 -e 's/"/\\"/g' \
 				 -e 's/	/\\t/g' \
 				 -e 's/  / \\x20/g' \
 				 -e 's/[ 	]*$/\\n/g' |
 			     tr -d '\n' |
 			     sed -e 's/^\(\\n\)*//' \
 				 -e 's/\(\\n\)*$//' > example2.txt
 		hasoutput=true
 		echo '	{"'$n'", '$j','
 		sed -e 's/^/		"/' -e 's/$/", /' < example2.txt
 		echo $unordered'},'
 		rm -f example.txt example2.txt
 	done
 	echo '}'

 	# body
 	echo \
 '
 func main() {
 	m := testing.MainStart(testdeps.TestDeps{}, tests, benchmarks, examples)
 '
 	if test -n "$testmain"; then
 		echo "	${testmain}(m)"
 	else
 		echo '	__os__.Exit(m.Run())'
 	fi

 	echo '}'
 }>_testmain.go

 case "x$dejagnu" in
 xno)
 	if test "$trace" = "true"; then
 	    echo ${GC} -g -c _testmain.go
 	fi
 	${GC} -g -c _testmain.go

 	if test "$trace" = "true"; then
 	    echo ${GL} *.o ${GOLIBS}
 	fi
 	${GL} *.o ${GOLIBS}

 	set +e
 	if test "$bench" = ""; then
 		if test "$trace" = "true"; then
 		    echo ./a.out -test.short -test.timeout=${timeout}s "$@"
 		fi
 		./a.out -test.short -test.timeout=${timeout}s "$@" &
 		pid=$!
 		(sleep `expr $timeout + 10`
 		    echo > gotest-timeout
 		    echo "timed out in gotest" 1>&2
 		    kill -9 $pid) &
 		alarmpid=$!
 		wait $pid
 		status=$?
 		if ! test -f gotest-timeout; then
 		    sleeppid=`ps -o pid,ppid,comm | grep " $alarmpid " | grep sleep | sed -e 's/ *\([0-9]*\) .*$/\1/'`
 		    kill $alarmpid
 		    wait $alarmpid
 		    if test "$sleeppid" != ""; then
 			kill $sleeppid
 		    fi
 		fi
 	else
 		if test "$trace" = "true"; then
 		    echo ./a.out -test.run=^\$ -test.bench="${bench}" "$@"
 		fi
 		./a.out -test.run=^\$ -test.bench="${bench}" "$@"
 		status=$?
 	fi
 	exit $status
 	;;
 xyes)
 	rm -rf ../../testsuite/*.o
 	files=`echo *`
 	for f in $files; do
 		if test "$f" = "_obj" || test "$f" = "_test"; then
 			continue
 		fi
 		rm -rf ../../testsuite/$f
 		if test -f $f; then
 			cp $f ../../testsuite/
 		else
 			ln -s ../$DIR/test/$f ../../testsuite/
 		fi
 	done
 	cd ../../testsuite
 	rm -rf _obj _test
 	mkdir _obj _test
 	if test "$testname" != ""; then
 	    GOTESTNAME="$testname"
 	    export GOTESTNAME
 	fi
 	$MAKE check RUNTESTFLAGS="$RUNTESTFLAGS GOTEST_TMPDIR=$DIR/test"
 	# Useful when using make check-target-libgo
 	cat libgo.log >> libgo-all.log
 	cat libgo.sum >> libgo-all.sum
 	rm -rf $files
 	;;
 esac
	#!/bin/sh
	# Copyright 2009 The Go Authors. All rights reserved.
	# Use of this source code is governed by a BSD-style
	# license that can be found in the LICENSE file.

	# Using all the *_test.go files in the current directory, write out a file
	# _testmain.go that runs all its tests. Compile everything and run the
	# tests.
	# If files are named on the command line, use them instead of *_test.go.

	# Makes egrep,grep work better in general if we put them
	# in ordinary C mode instead of what the current language is.
	LANG=C
	LC_ALL=C
	LC_CTYPE=C
	export LANG LC_ALL LC_CTYPE

	GC=${GC:-gccgo}
	GL=${GL:-${GC-gccgo}}
	GOLIBS=${GOLIBS:-}
	export GC GL GOLIBS

	NM=${NM:-nm}

	# srcdir is where the source files are found. basedir is where the
	# source file paths are relative to.
	# gofiles are the test files. pkgfiles are the source files.
	srcdir=.
	basedir=.
	goarch=""
	gofiles=""
	goos=""
	pkgfiles=""
	loop=true
	keep=false
	pkgpath=
	prefix=
	dejagnu=no
	timeout=600
	testname=""
	bench=""
	trace=false
	while $loop; do
	case "x$1" in
	x--srcdir)
	srcdir=$2
	shift
	shift
	;;
	x--srcdir=*)
	srcdir=`echo $1 \| sed -e 's/^--srcdir=//'`
	shift
	;;
	x--basedir)
	basedir=$2
	shift
	shift
	;;
	x--basedir=*)
	basedir=`echo $1 \| sed -e 's/^--basedir=//'`
	shift
	;;
	x--goarch)
	goarch=$2
	shift
	shift
	;;
	x--goarch=*)
	goarch=`echo $1 \| sed -e 's/^--goarch=//'`
	shift
	;;
	x--goos)
	goos=$2
	shift
	shift
	;;
	x--goos=*)
	goos=`echo $1 \| sed -e 's/^--goos=//'`
	shift
	;;
	x--pkgpath)
	pkgpath=$2
	shift
	shift
	;;
	x--pkgpath=*)
	pkgpath=`echo $1 \| sed -e 's/^--pkgpath=//'`
	shift
	;;
	x--prefix)
	prefix=$2
	shift
	shift
	;;
	x--prefix=*)
	prefix=`echo $1 \| sed -e 's/^--prefix=//'`
	shift
	;;
	x--keep)
	keep=true
	shift
	;;
	x--pkgfiles)
	pkgfiles=$2
	shift
	shift
	;;
	x--pkgfiles=*)
	pkgfiles=`echo $1 \| sed -e 's/^--pkgfiles=//'`
	shift
	;;
	x--dejagnu)
	dejagnu=$2
	shift
	shift
	;;
	x--dejagnu=*)
	dejagnu=`echo $1 \| sed -e 's/^--dejagnu=//'`
	shift
	;;
	x--timeout)
	timeout=$2
	shift
	shift
	;;
	x--timeout=*)
	timeout=`echo $1 \| sed -e 's/^--timeout=//'`
	shift
	;;
	x--testname)
	testname=$2
	shift
	shift
	;;
	x--testname=*)
	testname=`echo $1 \| sed -e 's/^--testname=//'`
	shift
	;;
	x--bench)
	bench=$2
	shift
	shift
	;;
	x--bench=*)
	bench=`echo $1 \| sed -e 's/^--bench=//'`
	shift
	;;
	x--trace)
	trace=true
	shift
	;;
	x-*)
	loop=false
	;;
	x)
	loop=false
	;;
	*)
	gofiles="$gofiles $1"
	shift
	;;
	esac
	done

	DIR=gotest$$
	rm -rf $DIR
	mkdir $DIR

	cd $DIR
	mkdir test
	cd test

	if test $keep = false; then
	trap "cd ../..; rm -rf $DIR" 0 1 2 3 14 15
	else
	trap "cd ../..; echo Keeping $DIR" 0 1 2 3 14 15
	fi

	case "$srcdir" in
	/*)
	;;
	*)
	srcdir="../../$srcdir"
	;;
	esac

	SRCDIR=$srcdir
	export SRCDIR

	case "$basedir" in
	/*)
	;;
	*)
	basedir="../../$basedir"
	;;
	esac

	# Link all the files/directories in srcdir into our working directory,
	# so that the tests do not have to refer to srcdir to find test data.
	ln -s $srcdir/* .

	# Some tests refer to a ../testdata directory.
	if test -e $srcdir/../testdata; then
	rm -f ../testdata
	abssrcdir=`cd $srcdir && pwd`
	ln -s $abssrcdir/../testdata ../testdata
	fi

	# Copy the .go files because io/utils_test.go expects a regular file.
	case "x$gofiles" in
	x)
	case "x$pkgfiles" in
	x)
	for f in `cd $srcdir; ls *.go`; do
	rm -f $f;
	cp $srcdir/$f .
	done
	;;
	*)
	for f in $pkgfiles; do
	case $f in
	/*)
	b=`basename $f`
	rm -f $b
	cp $f $b
	;;
	*)
	if test -f $basedir/$f; then
	b=`basename $f`
	rm -f $b
	cp $basedir/$f $b
	elif test -f ../../$f; then
	b=`basename $f`
	rm -f $b
	cp ../../$f $b
	else
	echo "file $f not found" 1>&2
	exit 1
	fi
	;;
	esac
	done
	for f in `cd $srcdir; ls *_test.go`; do
	rm -f $f
	cp $srcdir/$f .
	done
	;;
	esac
	;;
	*)
	for f in $gofiles; do
	b=`basename $f`
	rm -f $b
	cp $basedir/$f $b
	done
	case "x$pkgfiles" in
	x)
	for f in `cd $srcdir; ls .go \| grep -v _test.go`; do
	rm -f $f
	cp $srcdir/$f .
	done
	;;
	*)
	for f in $pkgfiles; do
	case $f in
	/*)
	b=`basename $f`
	rm -f $b
	cp $f $b
	;;
	*)
	if test -f $basedir/$f; then
	b=`basename $f`
	rm -f $b
	cp $basedir/$f $b
	elif test -f ../../$f; then
	b=`basename $f`
	rm -f $b
	cp ../../$f $b
	else
	echo "file $f not found" 1>&2
	exit 1
	fi
	;;
	esac
	done
	;;
	esac
	;;
	esac

	case "x$gofiles" in
	x)
	for f in `ls *_test.go`; do
	tag1=`echo $f \| sed -e 's/^._\([^_]\)_test.go$/\1/'`
	tag2=`echo $f \| sed -e 's/^._\([^_]\)_[^_]*_test.go$/\1/'`
	if test x$tag1 = x$f; then
	tag1=
	fi
	if test x$tag2 = x$f; then
	tag2=
	fi

	case "$tag1" in
	"") ;;
	$goarch) ;;
	$goos) ;;
	aix \| android \| darwin \| dragonfly \| freebsd \| hurd \| ios \| illumos \| js \| linux \| nacl \| netbsd \| openbsd \| plan9 \| solaris \| windows \| zos)
	tag1=nonmatchingtag
	;;
	386 \| amd64 \| amd64p32 \| arm \| armbe \| arm64 \| arm64be \| alpha \| ia64 \| m68k \| mips \| mipsle \| mips64 \| mips64le \| mips64p32 \| mips64p32le \| nios2 \| ppc \| ppc64 \| ppc64le \| riscv \| riscv64 \| s390 \| s390x \| sh \| shbe \| sparc \| sparc64 \| wasm)
	tag1=nonmatchingtag
	;;
	esac

	case "$tag2" in
	"") ;;
	$goarch) ;;
	$goos) ;;
	aix \| android \| darwin \| dragonfly \| freebsd \| hurd \| ios \| illumos \| js \| linux \| nacl \| netbsd \| openbsd \| plan9 \| solaris \| windows \| zos)
	tag2=nonmatchingtag
	;;
	386 \| amd64 \| amd64p32 \| arm \| armbe \| arm64 \| arm64be \| alpha \| ia64 \| m68k \| mips \| mipsle \| mips64 \| mips64le \| mips64p32 \| mips64p32le \| nios2 \| ppc \| ppc64 \| ppc64le \| riscv \| riscv64 \| s390 \| s390x \| sh \| shbe \| sparc \| sparc64 \| wasm)
	tag2=nonmatchingtag
	;;
	esac

	if test x$tag1 != xnonmatchingtag -a x$tag2 != xnonmatchingtag; then
	tags=`sed '/^package /q' < $f \| grep '^// *+build '`
	omatch=true
	first=true
	match=false
	for tag in $tags; do
	case $tag in
	"//")
	;;
	"+build" \| "//+build")
	if test "$first" = "true"; then
	first=false
	elif test "$match" = "false"; then
	omatch=false
	fi
	match=false
	;;
	$goos \| $goarch \| cgo \| gccgo \| go1.[0-9] \| go1.[0-9][0-9])
	match=true
	;;
	"!"$goos \| "!"$goarch \| "!cgo" \| "!gccgo" \| "!"go1.[0-9] \| "!"go1.1[0-6])
	;;
	,)
	cmatch=true
	for ctag in `echo $tag \| sed -e 's/,/ /g'`; do
	case $ctag in
	$goos \| $goarch \| cgo \| gccgo \| go1.[0-9] \| go1.[0-9][0-9])
	;;
	"!"$goos \| "!"$goarch \| "!cgo" \| "!gccgo" \| "!"go1.[0-9] \| "!"go1.1[0-6])
	cmatch=false
	;;
	"!"*)
	;;
	*)
	cmatch=false
	;;
	esac
	done
	if test "$cmatch" = "true"; then
	match=true
	fi
	;;
	"!"*)
	match=true
	;;
	esac
	done

	if test "$match" = "false" -a "$first" = "false"; then
	omatch=false
	fi

	if test "$omatch" = "true"; then
	gofiles="$gofiles $f"
	fi
	fi
	done
	;;
	*)
	xgofiles=$gofiles
	gofiles=
	for f in $xgofiles; do
	gofiles="$gofiles `basename $f`"
	done
	esac

	case "x$gofiles" in
	x)
	echo 'no test files found' 1>&2
	exit 1
	;;
	esac

	case "x$pkgfiles" in
	x)
	pkgbasefiles=`ls *.go \| grep -v _test.go 2>/dev/null`
	;;
	*)
	for f in $pkgfiles; do
	pkgbasefiles="$pkgbasefiles `basename $f`"
	done
	;;
	esac

	case "x$pkgfiles" in
	x)
	echo 'no source files found' 1>&2
	exit 1
	;;
	esac

	# Split $gofiles into external gofiles (those in *_test packages)
	# and internal ones (those in the main package).
	xgofiles=
	xpackage=
	for f in $gofiles; do
	package=`grep '^package[ ]' $f \| sed 1q`
	case "$package" in
	*_test)
	xpackage=`echo $package \| sed -e 's/package[ ]//' -e 's/[ ]*$//'`
	xgofiles="$xgofiles $f"
	;;
	*)
	ngofiles="$ngofiles $f"
	;;
	esac
	done
	gofiles=$ngofiles

	# External $O file
	xofile=""
	havex=false
	if [ "x$xgofiles" != "x" ]; then
	xofile="_xtest_.o"
	havex=true
	fi

	testmain=
	if $havex && fgrep 'func TestMain(' $xgofiles >/dev/null 2>&1; then
	package=`grep '^package[ ]' $xgofiles \| sed 1q \| sed -e 's/.* //'`
	testmain="${package}.TestMain"
	elif test -n "$gofiles" && fgrep 'func TestMain(' $gofiles >/dev/null 2>&1; then
	package=`grep '^package[ ]' $gofiles \| sed 1q \| sed -e 's/.* //'`
	testmain="${package}.TestMain"
	fi

	set -e

	package=`echo ${srcdir} \| sed -e 's\|^.*libgo/go/\|\|'`

	pkgpatharg=
	xpkgpatharg=
	prefixarg=
	if test -n "$pkgpath"; then
	pkgpatharg="-fgo-pkgpath=$pkgpath"
	xpkgpatharg="-fgo-pkgpath=${pkgpath}_test"
	elif test -n "$prefix"; then
	prefixarg="-fgo-prefix=$prefix"
	fi

	if test "$trace" = "true"; then
	echo $GC -g $pkgpatharg $prefixarg -c -I . -fno-toplevel-reorder -o _gotest_.o $gofiles $pkgbasefiles
	fi
	$GC -g $pkgpatharg $prefixarg -c -I . -fno-toplevel-reorder -o _gotest_.o $gofiles $pkgbasefiles

	if $havex; then
	mkdir -p `dirname $package`
	cp _gotest_.o `dirname $package`/lib`basename $package`.a

	# Force the test version of the package to be imported first,
	# so that its type definitions will be used, in case any new
	# methods appear in export_test.go files.
	echo "package $xpackage" > _first_test.go
	echo 'import _ "'$package'"' >> _first_test.go

	if test "$trace" = "true"; then
	echo $GC -g $xpkgpatharg -c -I . -fno-toplevel-reorder -o $xofile _first_test.go $xgofiles
	fi
	$GC -g $xpkgpatharg -c -I . -fno-toplevel-reorder -o $xofile _first_test.go $xgofiles
	fi

	# They all compile; now generate the code to call them.

	testname() {
	# Remove the package from the name used with the -test option.
	echo $1 \| sed 's/^.*\.//'
	}

	localname() {
	# The package main has been renamed to __main__ when imported.
	# Adjust its uses.
	# Also demangle underscores.
	echo $1 \| sed 's/^main\./__main__./' \| sed 's/__/_/'
	}

	# Takes a list of tests derived from 'nm' output (whose symbols are mangled)
	# and emits a demangled list of tests, using only the terminal package.
	# Example:
	#
	# Original symbol: foo/bar/leaf.Mumble
	# Mangled symbol: foo_1fbar_1leaf.Mumble
	# Returned: leaf.Mumble
	#
	symtogo() {
	result=""
	for tp in $*; do
	# Discard symbols with a leading dot.
	# On AIX, this will remove function text symbols (with a leading dot).
	# Therefore, only function descriptor symbols (without this leading dot)
	# will be used to retrieve the go symbols, avoiding duplication.
	if expr "$tp" : '^\.' >/dev/null 2>&1; then
	continue
	fi
	# Skip type descriptors. These are normally skipped because they
	# are weak symbols, but if not using GNU nm we may see them here.
	if expr "$tp" : '^type\.\.' >/dev/null 2>&1; then
	continue
	fi
	s=$(echo "$tp" \| sed -e 's/_1/%/g' \| sed -e 's/.*%//')
	# Screen out methods (X.Y.Z).
	if ! expr "$s" : '^[^.]\.[^.]$' >/dev/null 2>&1; then
	continue
	fi
	tname=$(testname $s)
	# Skip TestMain.
	if test x$tname = xTestMain; then
	continue
	fi
	# Check that the function is defined in a test file,
	# not an ordinary non-test file.
	if grep "^func $tname(" $gofiles $xgofiles >/dev/null 2>&1; then
	echo "$s"
	fi
	done
	}

	# Takes an example name and puts any output into the file example.txt.
	# It strips comment markers but does not otherwise change the output.
	exampleoutput() {
	n=$(testname $1)
	for f in $gofiles $xgofiles; do
	if ! grep "^func $n(" $f >/dev/null 2>&1; then
	continue
	fi
	# Copy the output comment, if any, into example.txt.
	# Remove the comment markers.
	sed -n "/^func $n(/,/^}$/ p" $f \|
	sed -n '\\|// \([Uu]nordered \)\?[Oo]utput:\|,$ p' \|
	sed -n '\\|//\| s\|[ ]*// \?\|\|p' > example.txt
	# Check whether we found an output comment.
	if ! sed -n '1p' < example.txt \| grep '[Oo]utput:' >/dev/null 2>&1; then
	rm -f example.txt
	fi
	return
	done
	}

	{
	# On systems using PPC64 ELF ABI v1 function symbols show up
	# as descriptors in the data section.
	text="[TD]"

	# test functions are named TestFoo
	# the grep -v eliminates methods and other special names
	# that have multiple dots.
	pattern='Test([^a-z].*)?'
	# The -p option tells GNU nm not to sort.
	# The -v option tells Solaris nm to sort by value.
	testsyms=$($NM -p -v _gotest_.o \| egrep " $text .\."$pattern'$' \| fgrep -v ' __go_' \| egrep -v '\.\.\w+$' \| sed 's/. //')
	testxsyms=
	if $havex; then
	testxsyms=$($NM -p -v $xofile \| egrep " $text .\."$pattern'$' \| fgrep -v ' __go_' \| egrep -v '\.\.\w+$' \| sed 's/. //')
	testsyms="$testsyms $testxsyms"
	fi
	tests=$(symtogo "$testsyms")
	if [ "x$tests" = x ]; then
	echo 'gotest: warning: no tests matching '$pattern in _gotest_.o $xofile 1>&2
	exit 2
	fi
	# benchmarks are named BenchmarkFoo.
	pattern='Benchmark([^a-z].*)?'
	benchmarksyms=$($NM -p -v _gotest_.o \| egrep " $text .\."$pattern'$' \| fgrep -v ' __go_' \| egrep -v '\.\.\w+$' \| sed 's/. //')
	if $havex; then
	benchmarkxsyms=$($NM -p -v $xofile \| egrep " $text .\."$pattern'$' \| fgrep -v ' __go_' \| egrep -v '\.\.\w+$' \| sed 's/. //')
	benchmarksyms="$benchmarksyms $benchmarkxsyms"
	fi
	benchmarks=$(symtogo "$benchmarksyms")

	# examples are named ExampleFoo
	pattern='Example([^a-z].*)?'
	examplesyms=$($NM -p -v _gotest_.o \| egrep " $text .\."$pattern'$' \| fgrep -v ' __go_' \| egrep -v '\.\.\w+$' \| sed 's/. //')
	if $havex; then
	examplexsyms=$($NM -p -v $xofile \| egrep " $text .\."$pattern'$' \| fgrep -v ' __go_' \| egrep -v '\.\.\w+$' \| sed 's/. //')
	examplesyms="$examplesyms $examplexsyms"
	fi
	examples=$(symtogo "$examplesyms")

	# package spec
	echo 'package main'
	echo
	# imports
	if echo "$tests" \| egrep -v '_test\.' >/dev/null; then
	echo 'import "./_gotest_"'
	fi
	if $havex; then
	needxtest=false
	if test -n "$testxsyms" -o -n "$benchmarkxsyms"; then
	needxtest=true
	else
	# Check whether any example has output.
	for i in $(symtogo "$examplexsyms"); do
	exampleoutput $i
	if test -f example.txt; then
	rm -f example.txt
	needxtest=true
	break
	fi
	done
	fi
	if test x$needxtest = xtrue; then
	echo 'import "./_xtest_"'
	else
	echo 'import _ "./_xtest_"'
	fi
	fi
	if test "$package" != "testing"; then
	echo 'import "testing"'
	fi
	echo 'import "testing/internal/testdeps"'
	if ! test -n "$testmain"; then
	echo 'import __os__ "os"'
	fi
	# test array
	echo
	echo 'var tests = []testing.InternalTest {'
	for i in $tests; do
	n=$(testname $i)
	j=$(localname $i)
	echo ' {"'$n'", '$j'},'
	done
	echo '}'

	# benchmark array
	# The comment makes the multiline declaration
	# gofmt-safe even when there are no benchmarks.
	echo 'var benchmarks = []testing.InternalBenchmark{'
	for i in $benchmarks; do
	n=$(testname $i)
	j=$(localname $i)
	echo ' {"'$n'", '$j'},'
	done
	echo '}'

	# examples array
	echo 'var examples = []testing.InternalExample{'
	for i in $examples; do
	n=$(testname $i)
	j=$(localname $i)
	# Look for a //output comment.
	hasoutput=false
	unordered=false
	output=
	exampleoutput $i
	if ! test -f example.txt; then
	continue
	fi
	# Check whether the output can be unordered.
	unordered=false
	if sed -n '1p' < example.txt \| grep -i unordered >/dev/null 2>&1; then
	unordered=true
	fi
	# Remove the output header.
	# Quote backslashes.
	# Quote quotation characters.
	# Turn tab into \t.
	# Turn pairs of spaces into " \x20", because $() will
	# drop duplicate spaces.
	# Drop trailing spaces, and turn newlines into \n.
	# Remove leading and trailing \n.
	sed '1 s/\([Uu]nordered \)\?[Oo]utput:[ ]*//' < example.txt \|
	sed -e 's/\\/\\\\/g' \
	-e 's/"/\\"/g' \
	-e 's/ /\\t/g' \
	-e 's/ / \\x20/g' \
	-e 's/[ ]*$/\\n/g' \|
	tr -d '\n' \|
	sed -e 's/^\(\\n\)*//' \
	-e 's/\(\\n\)*$//' > example2.txt
	hasoutput=true
	echo ' {"'$n'", '$j','
	sed -e 's/^/ "/' -e 's/$/", /' < example2.txt
	echo $unordered'},'
	rm -f example.txt example2.txt
	done
	echo '}'

	# body
	echo \
	'
	func main() {
	m := testing.MainStart(testdeps.TestDeps{}, tests, benchmarks, examples)
	'
	if test -n "$testmain"; then
	echo " ${testmain}(m)"
	else
	echo ' __os__.Exit(m.Run())'
	fi

	echo '}'
	}>_testmain.go

	case "x$dejagnu" in
	xno)
	if test "$trace" = "true"; then
	echo ${GC} -g -c _testmain.go
	fi
	${GC} -g -c _testmain.go

	if test "$trace" = "true"; then
	echo ${GL} *.o ${GOLIBS}
	fi
	${GL} *.o ${GOLIBS}

	set +e
	if test "$bench" = ""; then
	if test "$trace" = "true"; then
	echo ./a.out -test.short -test.timeout=${timeout}s "$@"
	fi
	./a.out -test.short -test.timeout=${timeout}s "$@" &
	pid=$!
	(sleep `expr $timeout + 10`
	echo > gotest-timeout
	echo "timed out in gotest" 1>&2
	kill -9 $pid) &
	alarmpid=$!
	wait $pid
	status=$?
	if ! test -f gotest-timeout; then
	sleeppid=`ps -o pid,ppid,comm \| grep " $alarmpid " \| grep sleep \| sed -e 's/ \([0-9]\) .*$/\1/'`
	kill $alarmpid
	wait $alarmpid
	if test "$sleeppid" != ""; then
	kill $sleeppid
	fi
	fi
	else
	if test "$trace" = "true"; then
	echo ./a.out -test.run=^\$ -test.bench="${bench}" "$@"
	fi
	./a.out -test.run=^\$ -test.bench="${bench}" "$@"
	status=$?
	fi
	exit $status
	;;
	xyes)
	rm -rf ../../testsuite/*.o
	files=`echo *`
	for f in $files; do
	if test "$f" = "_obj" \|\| test "$f" = "_test"; then
	continue
	fi
	rm -rf ../../testsuite/$f
	if test -f $f; then
	cp $f ../../testsuite/
	else
	ln -s ../$DIR/test/$f ../../testsuite/
	fi
	done
	cd ../../testsuite
	rm -rf _obj _test
	mkdir _obj _test
	if test "$testname" != ""; then
	GOTESTNAME="$testname"
	export GOTESTNAME
	fi
	$MAKE check RUNTESTFLAGS="$RUNTESTFLAGS GOTEST_TMPDIR=$DIR/test"
	# Useful when using make check-target-libgo
	cat libgo.log >> libgo-all.log
	cat libgo.sum >> libgo-all.sum
	rm -rf $files
	;;
	esac