| // Copyright 2009 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // Package scanner implements a scanner for Go source text. |
| // It takes a []byte as source which can then be tokenized |
| // through repeated calls to the Scan method. |
| // |
| package scanner |
| |
| import ( |
| "bytes" |
| "fmt" |
| "go/token" |
| "path/filepath" |
| "strconv" |
| "unicode" |
| "unicode/utf8" |
| ) |
| |
| // An ErrorHandler may be provided to Scanner.Init. If a syntax error is |
| // encountered and a handler was installed, the handler is called with a |
| // position and an error message. The position points to the beginning of |
| // the offending token. |
| // |
| type ErrorHandler func(pos token.Position, msg string) |
| |
| // A Scanner holds the scanner's internal state while processing |
| // a given text. It can be allocated as part of another data |
| // structure but must be initialized via Init before use. |
| // |
| type Scanner struct { |
| // immutable state |
| file *token.File // source file handle |
| dir string // directory portion of file.Name() |
| src []byte // source |
| err ErrorHandler // error reporting; or nil |
| mode Mode // scanning mode |
| |
| // scanning state |
| ch rune // current character |
| offset int // character offset |
| rdOffset int // reading offset (position after current character) |
| lineOffset int // current line offset |
| insertSemi bool // insert a semicolon before next newline |
| |
| // public state - ok to modify |
| ErrorCount int // number of errors encountered |
| } |
| |
| const bom = 0xFEFF // byte order mark, only permitted as very first character |
| |
| // Read the next Unicode char into s.ch. |
| // s.ch < 0 means end-of-file. |
| // |
| func (s *Scanner) next() { |
| if s.rdOffset < len(s.src) { |
| s.offset = s.rdOffset |
| if s.ch == '\n' { |
| s.lineOffset = s.offset |
| s.file.AddLine(s.offset) |
| } |
| r, w := rune(s.src[s.rdOffset]), 1 |
| switch { |
| case r == 0: |
| s.error(s.offset, "illegal character NUL") |
| case r >= utf8.RuneSelf: |
| // not ASCII |
| r, w = utf8.DecodeRune(s.src[s.rdOffset:]) |
| if r == utf8.RuneError && w == 1 { |
| s.error(s.offset, "illegal UTF-8 encoding") |
| } else if r == bom && s.offset > 0 { |
| s.error(s.offset, "illegal byte order mark") |
| } |
| } |
| s.rdOffset += w |
| s.ch = r |
| } else { |
| s.offset = len(s.src) |
| if s.ch == '\n' { |
| s.lineOffset = s.offset |
| s.file.AddLine(s.offset) |
| } |
| s.ch = -1 // eof |
| } |
| } |
| |
| // peek returns the byte following the most recently read character without |
| // advancing the scanner. If the scanner is at EOF, peek returns 0. |
| func (s *Scanner) peek() byte { |
| if s.rdOffset < len(s.src) { |
| return s.src[s.rdOffset] |
| } |
| return 0 |
| } |
| |
| // A mode value is a set of flags (or 0). |
| // They control scanner behavior. |
| // |
| type Mode uint |
| |
| const ( |
| ScanComments Mode = 1 << iota // return comments as COMMENT tokens |
| dontInsertSemis // do not automatically insert semicolons - for testing only |
| ) |
| |
| // Init prepares the scanner s to tokenize the text src by setting the |
| // scanner at the beginning of src. The scanner uses the file set file |
| // for position information and it adds line information for each line. |
| // It is ok to re-use the same file when re-scanning the same file as |
| // line information which is already present is ignored. Init causes a |
| // panic if the file size does not match the src size. |
| // |
| // Calls to Scan will invoke the error handler err if they encounter a |
| // syntax error and err is not nil. Also, for each error encountered, |
| // the Scanner field ErrorCount is incremented by one. The mode parameter |
| // determines how comments are handled. |
| // |
| // Note that Init may call err if there is an error in the first character |
| // of the file. |
| // |
| func (s *Scanner) Init(file *token.File, src []byte, err ErrorHandler, mode Mode) { |
| // Explicitly initialize all fields since a scanner may be reused. |
| if file.Size() != len(src) { |
| panic(fmt.Sprintf("file size (%d) does not match src len (%d)", file.Size(), len(src))) |
| } |
| s.file = file |
| s.dir, _ = filepath.Split(file.Name()) |
| s.src = src |
| s.err = err |
| s.mode = mode |
| |
| s.ch = ' ' |
| s.offset = 0 |
| s.rdOffset = 0 |
| s.lineOffset = 0 |
| s.insertSemi = false |
| s.ErrorCount = 0 |
| |
| s.next() |
| if s.ch == bom { |
| s.next() // ignore BOM at file beginning |
| } |
| } |
| |
| func (s *Scanner) error(offs int, msg string) { |
| if s.err != nil { |
| s.err(s.file.Position(s.file.Pos(offs)), msg) |
| } |
| s.ErrorCount++ |
| } |
| |
| func (s *Scanner) errorf(offs int, format string, args ...interface{}) { |
| s.error(offs, fmt.Sprintf(format, args...)) |
| } |
| |
| func (s *Scanner) scanComment() string { |
| // initial '/' already consumed; s.ch == '/' || s.ch == '*' |
| offs := s.offset - 1 // position of initial '/' |
| next := -1 // position immediately following the comment; < 0 means invalid comment |
| numCR := 0 |
| |
| if s.ch == '/' { |
| //-style comment |
| // (the final '\n' is not considered part of the comment) |
| s.next() |
| for s.ch != '\n' && s.ch >= 0 { |
| if s.ch == '\r' { |
| numCR++ |
| } |
| s.next() |
| } |
| // if we are at '\n', the position following the comment is afterwards |
| next = s.offset |
| if s.ch == '\n' { |
| next++ |
| } |
| goto exit |
| } |
| |
| /*-style comment */ |
| s.next() |
| for s.ch >= 0 { |
| ch := s.ch |
| if ch == '\r' { |
| numCR++ |
| } |
| s.next() |
| if ch == '*' && s.ch == '/' { |
| s.next() |
| next = s.offset |
| goto exit |
| } |
| } |
| |
| s.error(offs, "comment not terminated") |
| |
| exit: |
| lit := s.src[offs:s.offset] |
| |
| // On Windows, a (//-comment) line may end in "\r\n". |
| // Remove the final '\r' before analyzing the text for |
| // line directives (matching the compiler). Remove any |
| // other '\r' afterwards (matching the pre-existing be- |
| // havior of the scanner). |
| if numCR > 0 && len(lit) >= 2 && lit[1] == '/' && lit[len(lit)-1] == '\r' { |
| lit = lit[:len(lit)-1] |
| numCR-- |
| } |
| |
| // interpret line directives |
| // (//line directives must start at the beginning of the current line) |
| if next >= 0 /* implies valid comment */ && (lit[1] == '*' || offs == s.lineOffset) && bytes.HasPrefix(lit[2:], prefix) { |
| s.updateLineInfo(next, offs, lit) |
| } |
| |
| if numCR > 0 { |
| lit = stripCR(lit, lit[1] == '*') |
| } |
| |
| return string(lit) |
| } |
| |
| var prefix = []byte("line ") |
| |
| // updateLineInfo parses the incoming comment text at offset offs |
| // as a line directive. If successful, it updates the line info table |
| // for the position next per the line directive. |
| func (s *Scanner) updateLineInfo(next, offs int, text []byte) { |
| // extract comment text |
| if text[1] == '*' { |
| text = text[:len(text)-2] // lop off trailing "*/" |
| } |
| text = text[7:] // lop off leading "//line " or "/*line " |
| offs += 7 |
| |
| i, n, ok := trailingDigits(text) |
| if i == 0 { |
| return // ignore (not a line directive) |
| } |
| // i > 0 |
| |
| if !ok { |
| // text has a suffix :xxx but xxx is not a number |
| s.error(offs+i, "invalid line number: "+string(text[i:])) |
| return |
| } |
| |
| var line, col int |
| i2, n2, ok2 := trailingDigits(text[:i-1]) |
| if ok2 { |
| //line filename:line:col |
| i, i2 = i2, i |
| line, col = n2, n |
| if col == 0 { |
| s.error(offs+i2, "invalid column number: "+string(text[i2:])) |
| return |
| } |
| text = text[:i2-1] // lop off ":col" |
| } else { |
| //line filename:line |
| line = n |
| } |
| |
| if line == 0 { |
| s.error(offs+i, "invalid line number: "+string(text[i:])) |
| return |
| } |
| |
| // If we have a column (//line filename:line:col form), |
| // an empty filename means to use the previous filename. |
| filename := string(text[:i-1]) // lop off ":line", and trim white space |
| if filename == "" && ok2 { |
| filename = s.file.Position(s.file.Pos(offs)).Filename |
| } else if filename != "" { |
| // Put a relative filename in the current directory. |
| // This is for compatibility with earlier releases. |
| // See issue 26671. |
| filename = filepath.Clean(filename) |
| if !filepath.IsAbs(filename) { |
| filename = filepath.Join(s.dir, filename) |
| } |
| } |
| |
| s.file.AddLineColumnInfo(next, filename, line, col) |
| } |
| |
| func trailingDigits(text []byte) (int, int, bool) { |
| i := bytes.LastIndexByte(text, ':') // look from right (Windows filenames may contain ':') |
| if i < 0 { |
| return 0, 0, false // no ":" |
| } |
| // i >= 0 |
| n, err := strconv.ParseUint(string(text[i+1:]), 10, 0) |
| return i + 1, int(n), err == nil |
| } |
| |
| func (s *Scanner) findLineEnd() bool { |
| // initial '/' already consumed |
| |
| defer func(offs int) { |
| // reset scanner state to where it was upon calling findLineEnd |
| s.ch = '/' |
| s.offset = offs |
| s.rdOffset = offs + 1 |
| s.next() // consume initial '/' again |
| }(s.offset - 1) |
| |
| // read ahead until a newline, EOF, or non-comment token is found |
| for s.ch == '/' || s.ch == '*' { |
| if s.ch == '/' { |
| //-style comment always contains a newline |
| return true |
| } |
| /*-style comment: look for newline */ |
| s.next() |
| for s.ch >= 0 { |
| ch := s.ch |
| if ch == '\n' { |
| return true |
| } |
| s.next() |
| if ch == '*' && s.ch == '/' { |
| s.next() |
| break |
| } |
| } |
| s.skipWhitespace() // s.insertSemi is set |
| if s.ch < 0 || s.ch == '\n' { |
| return true |
| } |
| if s.ch != '/' { |
| // non-comment token |
| return false |
| } |
| s.next() // consume '/' |
| } |
| |
| return false |
| } |
| |
| func isLetter(ch rune) bool { |
| return 'a' <= lower(ch) && lower(ch) <= 'z' || ch == '_' || ch >= utf8.RuneSelf && unicode.IsLetter(ch) |
| } |
| |
| func isDigit(ch rune) bool { |
| return isDecimal(ch) || ch >= utf8.RuneSelf && unicode.IsDigit(ch) |
| } |
| |
| func (s *Scanner) scanIdentifier() string { |
| offs := s.offset |
| for isLetter(s.ch) || isDigit(s.ch) { |
| s.next() |
| } |
| return string(s.src[offs:s.offset]) |
| } |
| |
| func digitVal(ch rune) int { |
| switch { |
| case '0' <= ch && ch <= '9': |
| return int(ch - '0') |
| case 'a' <= lower(ch) && lower(ch) <= 'f': |
| return int(lower(ch) - 'a' + 10) |
| } |
| return 16 // larger than any legal digit val |
| } |
| |
| func lower(ch rune) rune { return ('a' - 'A') | ch } // returns lower-case ch iff ch is ASCII letter |
| func isDecimal(ch rune) bool { return '0' <= ch && ch <= '9' } |
| func isHex(ch rune) bool { return '0' <= ch && ch <= '9' || 'a' <= lower(ch) && lower(ch) <= 'f' } |
| |
| // digits accepts the sequence { digit | '_' }. |
| // If base <= 10, digits accepts any decimal digit but records |
| // the offset (relative to the source start) of a digit >= base |
| // in *invalid, if *invalid < 0. |
| // digits returns a bitset describing whether the sequence contained |
| // digits (bit 0 is set), or separators '_' (bit 1 is set). |
| func (s *Scanner) digits(base int, invalid *int) (digsep int) { |
| if base <= 10 { |
| max := rune('0' + base) |
| for isDecimal(s.ch) || s.ch == '_' { |
| ds := 1 |
| if s.ch == '_' { |
| ds = 2 |
| } else if s.ch >= max && *invalid < 0 { |
| *invalid = int(s.offset) // record invalid rune offset |
| } |
| digsep |= ds |
| s.next() |
| } |
| } else { |
| for isHex(s.ch) || s.ch == '_' { |
| ds := 1 |
| if s.ch == '_' { |
| ds = 2 |
| } |
| digsep |= ds |
| s.next() |
| } |
| } |
| return |
| } |
| |
| func (s *Scanner) scanNumber() (token.Token, string) { |
| offs := s.offset |
| tok := token.ILLEGAL |
| |
| base := 10 // number base |
| prefix := rune(0) // one of 0 (decimal), '0' (0-octal), 'x', 'o', or 'b' |
| digsep := 0 // bit 0: digit present, bit 1: '_' present |
| invalid := -1 // index of invalid digit in literal, or < 0 |
| |
| // integer part |
| if s.ch != '.' { |
| tok = token.INT |
| if s.ch == '0' { |
| s.next() |
| switch lower(s.ch) { |
| case 'x': |
| s.next() |
| base, prefix = 16, 'x' |
| case 'o': |
| s.next() |
| base, prefix = 8, 'o' |
| case 'b': |
| s.next() |
| base, prefix = 2, 'b' |
| default: |
| base, prefix = 8, '0' |
| digsep = 1 // leading 0 |
| } |
| } |
| digsep |= s.digits(base, &invalid) |
| } |
| |
| // fractional part |
| if s.ch == '.' { |
| tok = token.FLOAT |
| if prefix == 'o' || prefix == 'b' { |
| s.error(s.offset, "invalid radix point in "+litname(prefix)) |
| } |
| s.next() |
| digsep |= s.digits(base, &invalid) |
| } |
| |
| if digsep&1 == 0 { |
| s.error(s.offset, litname(prefix)+" has no digits") |
| } |
| |
| // exponent |
| if e := lower(s.ch); e == 'e' || e == 'p' { |
| switch { |
| case e == 'e' && prefix != 0 && prefix != '0': |
| s.errorf(s.offset, "%q exponent requires decimal mantissa", s.ch) |
| case e == 'p' && prefix != 'x': |
| s.errorf(s.offset, "%q exponent requires hexadecimal mantissa", s.ch) |
| } |
| s.next() |
| tok = token.FLOAT |
| if s.ch == '+' || s.ch == '-' { |
| s.next() |
| } |
| ds := s.digits(10, nil) |
| digsep |= ds |
| if ds&1 == 0 { |
| s.error(s.offset, "exponent has no digits") |
| } |
| } else if prefix == 'x' && tok == token.FLOAT { |
| s.error(s.offset, "hexadecimal mantissa requires a 'p' exponent") |
| } |
| |
| // suffix 'i' |
| if s.ch == 'i' { |
| tok = token.IMAG |
| s.next() |
| } |
| |
| lit := string(s.src[offs:s.offset]) |
| if tok == token.INT && invalid >= 0 { |
| s.errorf(invalid, "invalid digit %q in %s", lit[invalid-offs], litname(prefix)) |
| } |
| if digsep&2 != 0 { |
| if i := invalidSep(lit); i >= 0 { |
| s.error(offs+i, "'_' must separate successive digits") |
| } |
| } |
| |
| return tok, lit |
| } |
| |
| func litname(prefix rune) string { |
| switch prefix { |
| case 'x': |
| return "hexadecimal literal" |
| case 'o', '0': |
| return "octal literal" |
| case 'b': |
| return "binary literal" |
| } |
| return "decimal literal" |
| } |
| |
| // invalidSep returns the index of the first invalid separator in x, or -1. |
| func invalidSep(x string) int { |
| x1 := ' ' // prefix char, we only care if it's 'x' |
| d := '.' // digit, one of '_', '0' (a digit), or '.' (anything else) |
| i := 0 |
| |
| // a prefix counts as a digit |
| if len(x) >= 2 && x[0] == '0' { |
| x1 = lower(rune(x[1])) |
| if x1 == 'x' || x1 == 'o' || x1 == 'b' { |
| d = '0' |
| i = 2 |
| } |
| } |
| |
| // mantissa and exponent |
| for ; i < len(x); i++ { |
| p := d // previous digit |
| d = rune(x[i]) |
| switch { |
| case d == '_': |
| if p != '0' { |
| return i |
| } |
| case isDecimal(d) || x1 == 'x' && isHex(d): |
| d = '0' |
| default: |
| if p == '_' { |
| return i - 1 |
| } |
| d = '.' |
| } |
| } |
| if d == '_' { |
| return len(x) - 1 |
| } |
| |
| return -1 |
| } |
| |
| // scanEscape parses an escape sequence where rune is the accepted |
| // escaped quote. In case of a syntax error, it stops at the offending |
| // character (without consuming it) and returns false. Otherwise |
| // it returns true. |
| func (s *Scanner) scanEscape(quote rune) bool { |
| offs := s.offset |
| |
| var n int |
| var base, max uint32 |
| switch s.ch { |
| case 'a', 'b', 'f', 'n', 'r', 't', 'v', '\\', quote: |
| s.next() |
| return true |
| case '0', '1', '2', '3', '4', '5', '6', '7': |
| n, base, max = 3, 8, 255 |
| case 'x': |
| s.next() |
| n, base, max = 2, 16, 255 |
| case 'u': |
| s.next() |
| n, base, max = 4, 16, unicode.MaxRune |
| case 'U': |
| s.next() |
| n, base, max = 8, 16, unicode.MaxRune |
| default: |
| msg := "unknown escape sequence" |
| if s.ch < 0 { |
| msg = "escape sequence not terminated" |
| } |
| s.error(offs, msg) |
| return false |
| } |
| |
| var x uint32 |
| for n > 0 { |
| d := uint32(digitVal(s.ch)) |
| if d >= base { |
| msg := fmt.Sprintf("illegal character %#U in escape sequence", s.ch) |
| if s.ch < 0 { |
| msg = "escape sequence not terminated" |
| } |
| s.error(s.offset, msg) |
| return false |
| } |
| x = x*base + d |
| s.next() |
| n-- |
| } |
| |
| if x > max || 0xD800 <= x && x < 0xE000 { |
| s.error(offs, "escape sequence is invalid Unicode code point") |
| return false |
| } |
| |
| return true |
| } |
| |
| func (s *Scanner) scanRune() string { |
| // '\'' opening already consumed |
| offs := s.offset - 1 |
| |
| valid := true |
| n := 0 |
| for { |
| ch := s.ch |
| if ch == '\n' || ch < 0 { |
| // only report error if we don't have one already |
| if valid { |
| s.error(offs, "rune literal not terminated") |
| valid = false |
| } |
| break |
| } |
| s.next() |
| if ch == '\'' { |
| break |
| } |
| n++ |
| if ch == '\\' { |
| if !s.scanEscape('\'') { |
| valid = false |
| } |
| // continue to read to closing quote |
| } |
| } |
| |
| if valid && n != 1 { |
| s.error(offs, "illegal rune literal") |
| } |
| |
| return string(s.src[offs:s.offset]) |
| } |
| |
| func (s *Scanner) scanString() string { |
| // '"' opening already consumed |
| offs := s.offset - 1 |
| |
| for { |
| ch := s.ch |
| if ch == '\n' || ch < 0 { |
| s.error(offs, "string literal not terminated") |
| break |
| } |
| s.next() |
| if ch == '"' { |
| break |
| } |
| if ch == '\\' { |
| s.scanEscape('"') |
| } |
| } |
| |
| return string(s.src[offs:s.offset]) |
| } |
| |
| func stripCR(b []byte, comment bool) []byte { |
| c := make([]byte, len(b)) |
| i := 0 |
| for j, ch := range b { |
| // In a /*-style comment, don't strip \r from *\r/ (incl. |
| // sequences of \r from *\r\r...\r/) since the resulting |
| // */ would terminate the comment too early unless the \r |
| // is immediately following the opening /* in which case |
| // it's ok because /*/ is not closed yet (issue #11151). |
| if ch != '\r' || comment && i > len("/*") && c[i-1] == '*' && j+1 < len(b) && b[j+1] == '/' { |
| c[i] = ch |
| i++ |
| } |
| } |
| return c[:i] |
| } |
| |
| func (s *Scanner) scanRawString() string { |
| // '`' opening already consumed |
| offs := s.offset - 1 |
| |
| hasCR := false |
| for { |
| ch := s.ch |
| if ch < 0 { |
| s.error(offs, "raw string literal not terminated") |
| break |
| } |
| s.next() |
| if ch == '`' { |
| break |
| } |
| if ch == '\r' { |
| hasCR = true |
| } |
| } |
| |
| lit := s.src[offs:s.offset] |
| if hasCR { |
| lit = stripCR(lit, false) |
| } |
| |
| return string(lit) |
| } |
| |
| func (s *Scanner) skipWhitespace() { |
| for s.ch == ' ' || s.ch == '\t' || s.ch == '\n' && !s.insertSemi || s.ch == '\r' { |
| s.next() |
| } |
| } |
| |
| // Helper functions for scanning multi-byte tokens such as >> += >>= . |
| // Different routines recognize different length tok_i based on matches |
| // of ch_i. If a token ends in '=', the result is tok1 or tok3 |
| // respectively. Otherwise, the result is tok0 if there was no other |
| // matching character, or tok2 if the matching character was ch2. |
| |
| func (s *Scanner) switch2(tok0, tok1 token.Token) token.Token { |
| if s.ch == '=' { |
| s.next() |
| return tok1 |
| } |
| return tok0 |
| } |
| |
| func (s *Scanner) switch3(tok0, tok1 token.Token, ch2 rune, tok2 token.Token) token.Token { |
| if s.ch == '=' { |
| s.next() |
| return tok1 |
| } |
| if s.ch == ch2 { |
| s.next() |
| return tok2 |
| } |
| return tok0 |
| } |
| |
| func (s *Scanner) switch4(tok0, tok1 token.Token, ch2 rune, tok2, tok3 token.Token) token.Token { |
| if s.ch == '=' { |
| s.next() |
| return tok1 |
| } |
| if s.ch == ch2 { |
| s.next() |
| if s.ch == '=' { |
| s.next() |
| return tok3 |
| } |
| return tok2 |
| } |
| return tok0 |
| } |
| |
| // Scan scans the next token and returns the token position, the token, |
| // and its literal string if applicable. The source end is indicated by |
| // token.EOF. |
| // |
| // If the returned token is a literal (token.IDENT, token.INT, token.FLOAT, |
| // token.IMAG, token.CHAR, token.STRING) or token.COMMENT, the literal string |
| // has the corresponding value. |
| // |
| // If the returned token is a keyword, the literal string is the keyword. |
| // |
| // If the returned token is token.SEMICOLON, the corresponding |
| // literal string is ";" if the semicolon was present in the source, |
| // and "\n" if the semicolon was inserted because of a newline or |
| // at EOF. |
| // |
| // If the returned token is token.ILLEGAL, the literal string is the |
| // offending character. |
| // |
| // In all other cases, Scan returns an empty literal string. |
| // |
| // For more tolerant parsing, Scan will return a valid token if |
| // possible even if a syntax error was encountered. Thus, even |
| // if the resulting token sequence contains no illegal tokens, |
| // a client may not assume that no error occurred. Instead it |
| // must check the scanner's ErrorCount or the number of calls |
| // of the error handler, if there was one installed. |
| // |
| // Scan adds line information to the file added to the file |
| // set with Init. Token positions are relative to that file |
| // and thus relative to the file set. |
| // |
| func (s *Scanner) Scan() (pos token.Pos, tok token.Token, lit string) { |
| scanAgain: |
| s.skipWhitespace() |
| |
| // current token start |
| pos = s.file.Pos(s.offset) |
| |
| // determine token value |
| insertSemi := false |
| switch ch := s.ch; { |
| case isLetter(ch): |
| lit = s.scanIdentifier() |
| if len(lit) > 1 { |
| // keywords are longer than one letter - avoid lookup otherwise |
| tok = token.Lookup(lit) |
| switch tok { |
| case token.IDENT, token.BREAK, token.CONTINUE, token.FALLTHROUGH, token.RETURN: |
| insertSemi = true |
| } |
| } else { |
| insertSemi = true |
| tok = token.IDENT |
| } |
| case isDecimal(ch) || ch == '.' && isDecimal(rune(s.peek())): |
| insertSemi = true |
| tok, lit = s.scanNumber() |
| default: |
| s.next() // always make progress |
| switch ch { |
| case -1: |
| if s.insertSemi { |
| s.insertSemi = false // EOF consumed |
| return pos, token.SEMICOLON, "\n" |
| } |
| tok = token.EOF |
| case '\n': |
| // we only reach here if s.insertSemi was |
| // set in the first place and exited early |
| // from s.skipWhitespace() |
| s.insertSemi = false // newline consumed |
| return pos, token.SEMICOLON, "\n" |
| case '"': |
| insertSemi = true |
| tok = token.STRING |
| lit = s.scanString() |
| case '\'': |
| insertSemi = true |
| tok = token.CHAR |
| lit = s.scanRune() |
| case '`': |
| insertSemi = true |
| tok = token.STRING |
| lit = s.scanRawString() |
| case ':': |
| tok = s.switch2(token.COLON, token.DEFINE) |
| case '.': |
| // fractions starting with a '.' are handled by outer switch |
| tok = token.PERIOD |
| if s.ch == '.' && s.peek() == '.' { |
| s.next() |
| s.next() // consume last '.' |
| tok = token.ELLIPSIS |
| } |
| case ',': |
| tok = token.COMMA |
| case ';': |
| tok = token.SEMICOLON |
| lit = ";" |
| case '(': |
| tok = token.LPAREN |
| case ')': |
| insertSemi = true |
| tok = token.RPAREN |
| case '[': |
| tok = token.LBRACK |
| case ']': |
| insertSemi = true |
| tok = token.RBRACK |
| case '{': |
| tok = token.LBRACE |
| case '}': |
| insertSemi = true |
| tok = token.RBRACE |
| case '+': |
| tok = s.switch3(token.ADD, token.ADD_ASSIGN, '+', token.INC) |
| if tok == token.INC { |
| insertSemi = true |
| } |
| case '-': |
| tok = s.switch3(token.SUB, token.SUB_ASSIGN, '-', token.DEC) |
| if tok == token.DEC { |
| insertSemi = true |
| } |
| case '*': |
| tok = s.switch2(token.MUL, token.MUL_ASSIGN) |
| case '/': |
| if s.ch == '/' || s.ch == '*' { |
| // comment |
| if s.insertSemi && s.findLineEnd() { |
| // reset position to the beginning of the comment |
| s.ch = '/' |
| s.offset = s.file.Offset(pos) |
| s.rdOffset = s.offset + 1 |
| s.insertSemi = false // newline consumed |
| return pos, token.SEMICOLON, "\n" |
| } |
| comment := s.scanComment() |
| if s.mode&ScanComments == 0 { |
| // skip comment |
| s.insertSemi = false // newline consumed |
| goto scanAgain |
| } |
| tok = token.COMMENT |
| lit = comment |
| } else { |
| tok = s.switch2(token.QUO, token.QUO_ASSIGN) |
| } |
| case '%': |
| tok = s.switch2(token.REM, token.REM_ASSIGN) |
| case '^': |
| tok = s.switch2(token.XOR, token.XOR_ASSIGN) |
| case '<': |
| if s.ch == '-' { |
| s.next() |
| tok = token.ARROW |
| } else { |
| tok = s.switch4(token.LSS, token.LEQ, '<', token.SHL, token.SHL_ASSIGN) |
| } |
| case '>': |
| tok = s.switch4(token.GTR, token.GEQ, '>', token.SHR, token.SHR_ASSIGN) |
| case '=': |
| tok = s.switch2(token.ASSIGN, token.EQL) |
| case '!': |
| tok = s.switch2(token.NOT, token.NEQ) |
| case '&': |
| if s.ch == '^' { |
| s.next() |
| tok = s.switch2(token.AND_NOT, token.AND_NOT_ASSIGN) |
| } else { |
| tok = s.switch3(token.AND, token.AND_ASSIGN, '&', token.LAND) |
| } |
| case '|': |
| tok = s.switch3(token.OR, token.OR_ASSIGN, '|', token.LOR) |
| default: |
| // next reports unexpected BOMs - don't repeat |
| if ch != bom { |
| s.errorf(s.file.Offset(pos), "illegal character %#U", ch) |
| } |
| insertSemi = s.insertSemi // preserve insertSemi info |
| tok = token.ILLEGAL |
| lit = string(ch) |
| } |
| } |
| if s.mode&dontInsertSemis == 0 { |
| s.insertSemi = insertSemi |
| } |
| |
| return |
| } |