| // Copyright 2016 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| package runtime |
| |
| import _ "unsafe" // For go:linkname. |
| |
| // For gccgo, use go:linkname to export compiler-called functions. |
| // |
| //go:linkname decoderune |
| |
| // Numbers fundamental to the encoding. |
| const ( |
| runeError = '\uFFFD' // the "error" Rune or "Unicode replacement character" |
| runeSelf = 0x80 // characters below runeSelf are represented as themselves in a single byte. |
| maxRune = '\U0010FFFF' // Maximum valid Unicode code point. |
| ) |
| |
| // Code points in the surrogate range are not valid for UTF-8. |
| const ( |
| surrogateMin = 0xD800 |
| surrogateMax = 0xDFFF |
| ) |
| |
| const ( |
| t1 = 0x00 // 0000 0000 |
| tx = 0x80 // 1000 0000 |
| t2 = 0xC0 // 1100 0000 |
| t3 = 0xE0 // 1110 0000 |
| t4 = 0xF0 // 1111 0000 |
| t5 = 0xF8 // 1111 1000 |
| |
| maskx = 0x3F // 0011 1111 |
| mask2 = 0x1F // 0001 1111 |
| mask3 = 0x0F // 0000 1111 |
| mask4 = 0x07 // 0000 0111 |
| |
| rune1Max = 1<<7 - 1 |
| rune2Max = 1<<11 - 1 |
| rune3Max = 1<<16 - 1 |
| |
| // The default lowest and highest continuation byte. |
| locb = 0x80 // 1000 0000 |
| hicb = 0xBF // 1011 1111 |
| ) |
| |
| // countrunes returns the number of runes in s. |
| func countrunes(s string) int { |
| n := 0 |
| for range s { |
| n++ |
| } |
| return n |
| } |
| |
| // decoderune returns the non-ASCII rune at the start of |
| // s[k:] and the index after the rune in s. |
| // |
| // decoderune assumes that caller has checked that |
| // the to be decoded rune is a non-ASCII rune. |
| // |
| // If the string appears to be incomplete or decoding problems |
| // are encountered (runeerror, k + 1) is returned to ensure |
| // progress when decoderune is used to iterate over a string. |
| func decoderune(s string, k int) (r rune, pos int) { |
| pos = k |
| |
| if k >= len(s) { |
| return runeError, k + 1 |
| } |
| |
| s = s[k:] |
| |
| switch { |
| case t2 <= s[0] && s[0] < t3: |
| // 0080-07FF two byte sequence |
| if len(s) > 1 && (locb <= s[1] && s[1] <= hicb) { |
| r = rune(s[0]&mask2)<<6 | rune(s[1]&maskx) |
| pos += 2 |
| if rune1Max < r { |
| return |
| } |
| } |
| case t3 <= s[0] && s[0] < t4: |
| // 0800-FFFF three byte sequence |
| if len(s) > 2 && (locb <= s[1] && s[1] <= hicb) && (locb <= s[2] && s[2] <= hicb) { |
| r = rune(s[0]&mask3)<<12 | rune(s[1]&maskx)<<6 | rune(s[2]&maskx) |
| pos += 3 |
| if rune2Max < r && !(surrogateMin <= r && r <= surrogateMax) { |
| return |
| } |
| } |
| case t4 <= s[0] && s[0] < t5: |
| // 10000-1FFFFF four byte sequence |
| if len(s) > 3 && (locb <= s[1] && s[1] <= hicb) && (locb <= s[2] && s[2] <= hicb) && (locb <= s[3] && s[3] <= hicb) { |
| r = rune(s[0]&mask4)<<18 | rune(s[1]&maskx)<<12 | rune(s[2]&maskx)<<6 | rune(s[3]&maskx) |
| pos += 4 |
| if rune3Max < r && r <= maxRune { |
| return |
| } |
| } |
| } |
| |
| return runeError, k + 1 |
| } |
| |
| // encoderune writes into p (which must be large enough) the UTF-8 encoding of the rune. |
| // It returns the number of bytes written. |
| func encoderune(p []byte, r rune) int { |
| // Negative values are erroneous. Making it unsigned addresses the problem. |
| switch i := uint32(r); { |
| case i <= rune1Max: |
| p[0] = byte(r) |
| return 1 |
| case i <= rune2Max: |
| _ = p[1] // eliminate bounds checks |
| p[0] = t2 | byte(r>>6) |
| p[1] = tx | byte(r)&maskx |
| return 2 |
| case i > maxRune, surrogateMin <= i && i <= surrogateMax: |
| r = runeError |
| fallthrough |
| case i <= rune3Max: |
| _ = p[2] // eliminate bounds checks |
| p[0] = t3 | byte(r>>12) |
| p[1] = tx | byte(r>>6)&maskx |
| p[2] = tx | byte(r)&maskx |
| return 3 |
| default: |
| _ = p[3] // eliminate bounds checks |
| p[0] = t4 | byte(r>>18) |
| p[1] = tx | byte(r>>12)&maskx |
| p[2] = tx | byte(r>>6)&maskx |
| p[3] = tx | byte(r)&maskx |
| return 4 |
| } |
| } |