libgo/testsuite/gotest - gofrontend - Git at Google

 #!/bin/sh
 # Copyright 2009 The Go Authors. All rights reserved.
 # Use of this source code is governed by a BSD-style
 # license that can be found in the LICENSE file.

 # Using all the *_test.go files in the current directory, write out a file
 # _testmain.go that runs all its tests. Compile everything and run the
 # tests.
 # If files are named on the command line, use them instead of *_test.go.

 # Makes egrep,grep work better in general if we put them
 # in ordinary C mode instead of what the current language is.
 LANG=C
 LC_ALL=C
 LC_CTYPE=C
 export LANG LC_ALL LC_CTYPE

 GC=${GC:-gccgo}
 GL=${GL:-${GC-gccgo}}
 GOLIBS=${GOLIBS:-}
 export GC GL GOLIBS

 NM=${NM:-nm}

 # srcdir is where the source files are found.  basedir is where the
 # source file paths are relative to.
 # gofiles are the test files.  pkgfiles are the source files.
 srcdir=.
 basedir=.
 goarch=""
 gofiles=""
 goos=""
 pkgfiles=""
 loop=true
 keep=false
 pkgpath=
 prefix=
 dejagnu=no
 timeout=240
 testname=""
 bench=""
 trace=false
 while $loop; do
 	case "x$1" in
         x--srcdir)
 		srcdir=$2
 		shift
 		shift
 		;;
 	x--srcdir=*)
 		srcdir=`echo $1 | sed -e 's/^--srcdir=//'`
 		shift
 		;;
         x--basedir)
 		basedir=$2
 		shift
 		shift
 		;;
 	x--basedir=*)
 		basedir=`echo $1 | sed -e 's/^--basedir=//'`
 		shift
 		;;
 	x--goarch)
 		goarch=$2
 		shift
 		shift
 		;;
 	x--goarch=*)
 		goarch=`echo $1 | sed -e 's/^--goarch=//'`
 		shift
 		;;
 	x--goos)
 		goos=$2
 		shift
 		shift
 		;;
 	x--goos=*)
 		goos=`echo $1 | sed -e 's/^--goos=//'`
 		shift
 		;;
 	x--pkgpath)
 		pkgpath=$2
 		shift
 		shift
 		;;
 	x--pkgpath=*)
 		pkgpath=`echo $1 | sed -e 's/^--pkgpath=//'`
 		shift
 		;;
 	x--prefix)
 		prefix=$2
 		shift
 		shift
 		;;
 	x--prefix=*)
 		prefix=`echo $1 | sed -e 's/^--prefix=//'`
 		shift
 		;;
 	x--keep)
 		keep=true
                 shift
 		;;
 	x--pkgfiles)
 		pkgfiles=$2
 		shift
 		shift
 		;;
 	x--pkgfiles=*)
 		pkgfiles=`echo $1 | sed -e 's/^--pkgfiles=//'`
 		shift
 		;;
 	x--dejagnu)
 		dejagnu=$2
 		shift
 		shift
 		;;
 	x--dejagnu=*)
 		dejagnu=`echo $1 | sed -e 's/^--dejagnu=//'`
 		shift
 		;;
 	x--timeout)
 		timeout=$2
 		shift
 		shift
 		;;
 	x--timeout=*)
 		timeout=`echo $1 | sed -e 's/^--timeout=//'`
 		shift
 		;;
 	x--testname)
 		testname=$2
 		shift
 		shift
 		;;
 	x--testname=*)
 		testname=`echo $1 | sed -e 's/^--testname=//'`
 		shift
 		;;
 	x--bench)
 		bench=$2
 		shift
 		shift
 		;;
 	x--bench=*)
 		bench=`echo $1 | sed -e 's/^--bench=//'`
 		shift
 		;;
 	x--trace)
 		trace=true
 		shift
 		;;
 	x-*)
 		loop=false
 		;;
 	x)
 		loop=false
 		;;
 	*)
 		gofiles="$gofiles $1"
 		shift
 		;;
 	esac
 done

 DIR=gotest$$
 rm -rf $DIR
 mkdir $DIR

 cd $DIR
 mkdir test
 cd test

 if test $keep = false; then
   trap "cd ../..; rm -rf $DIR" 0 1 2 3 14 15
 else
   trap "cd ../..; echo Keeping $DIR" 0 1 2 3 14 15
 fi

 case "$srcdir" in
 	/*)
 		;;
 	*)
 		srcdir="../../$srcdir"
                 ;;
 esac

 SRCDIR=$srcdir
 export SRCDIR

 case "$basedir" in
 	/*)
 		;;
 	*)
 		basedir="../../$basedir"
                 ;;
 esac

 # Link all the files/directories in srcdir into our working directory,
 # so that the tests do not have to refer to srcdir to find test data.
 ln -s $srcdir/* .

 # Some tests refer to a ../testdata directory.
 if test -e $srcdir/../testdata; then
   rm -f ../testdata
   abssrcdir=`cd $srcdir && pwd`
   ln -s $abssrcdir/../testdata ../testdata
 fi

 # Copy the .go files because io/utils_test.go expects a regular file.
 case "x$gofiles" in
 x)
 	case "x$pkgfiles" in
 	x)
 		for f in `cd $srcdir; ls *.go`; do
 		    rm -f $f;
 		    cp $srcdir/$f .
 		done
 		;;
 	*)
 		for f in $pkgfiles; do
                     case $f in
                     /*)
                         b=`basename $f`
                         rm -f $b
                         cp $f $b
                         ;;
                     *)
 		        if test -f $basedir/$f; then
 			  b=`basename $f`
 			  rm -f $b
 			  cp $basedir/$f $b
 		        elif test -f ../../$f; then
 			  b=`basename $f`
 			  rm -f $b
 			  cp ../../$f $b
 		        else
 			  echo "file $f not found" 1>&2
 			  exit 1
 		        fi
                         ;;
                     esac
 		done
 		for f in `cd $srcdir; ls *_test.go`; do
 		    rm -f $f
 		    cp $srcdir/$f .
 		done
 		;;
 	esac
 	;;
 *)
 	for f in $gofiles; do
 	    b=`basename $f`
 	    rm -f $b
 	    cp $basedir/$f $b
 	done
 	case "x$pkgfiles" in
 	x)
 		for f in `cd $srcdir; ls *.go | grep -v *_test.go`; do
 		    rm -f $f
 		    cp $srcdir/$f .
 		done
 		;;
 	*)
 		for f in $pkgfiles; do
                     case $f in
                     /*)
                         b=`basename $f`
                         rm -f $b
                         cp $f $b
                         ;;
                     *)
 		        if test -f $basedir/$f; then
 			  b=`basename $f`
 			  rm -f $b
 			  cp $basedir/$f $b
 		        elif test -f ../../$f; then
 			  b=`basename $f`
 			  rm -f $b
 			  cp ../../$f $b
 		        else
 			  echo "file $f not found" 1>&2
 			  exit 1
 		        fi
                         ;;
                     esac
 		done
 		;;
 	esac
 	;;
 esac

 # Some tests expect the _obj directory created by the gc Makefiles.
 mkdir _obj

 # Some tests expect the _test directory created by the gc Makefiles.
 mkdir _test

 case "x$gofiles" in
 x)
 	for f in `ls *_test.go`; do
 	    tag1=`echo $f | sed -e 's/^.*_\([^_]*\)_test.go$/\1/'`
 	    tag2=`echo $f | sed -e 's/^.*_\([^_]*\)_[^_]*_test.go$/\1/'`
 	    if test x$tag1 = x$f; then
 		tag1=
 	    fi
 	    if test x$tag2 = x$f; then
 		tag2=
 	    fi

 	    case "$tag1" in
 	    "") ;;
 	    $goarch) ;;
 	    $goos) ;;
 	    aix | android | darwin | dragonfly | freebsd | linux | nacl | netbsd | openbsd | plan9 | solaris | windows)
 		tag1=nonmatchingtag
 		;;
 	    386 | amd64 | amd64p32 | arm | armbe | arm64 | arm64be | alpha | ia64 | m68k | ppc64 | ppc64le | mips | mipsle | mips64 | mips64le | mips64p32 | mips64p32le | ppc | s390 | s390x | sparc | sparc64)
 		tag1=nonmatchingtag
 		;;
 	    esac

 	    case "$tag2" in
 	    "") ;;
 	    $goarch) ;;
 	    $goos) ;;
 	    aix | android | darwin | dragonfly | freebsd | linux | nacl | netbsd | openbsd | plan9 | solaris | windows)
 		tag2=nonmatchingtag
 		;;
 	    386 | amd64 | amd64p32 | arm | armbe | arm64 | arm64be | alpha | ia64 | m68k | ppc64 | ppc64le | mips | mipsle | mips64 | mips64le | mips64p32 | mips64p32le | ppc | s390 | s390x | sparc | sparc64)
 		tag2=nonmatchingtag
 		;;
 	    esac

 	    if test x$tag1 != xnonmatchingtag -a x$tag2 != xnonmatchingtag; then
 		tags=`sed '/^package /q' < $f | grep '^// +build '`
 		omatch=true
 		first=true
 		match=false
 		for tag in $tags; do
 		    case $tag in
 		    "//")
 			;;
 		    "+build")
 			if test "$first" = "true"; then
 			    first=false
 			elif test "$match" = "false"; then
 			    omatch=false
 			fi
 			match=false
 			;;
 		    $goos | $goarch | cgo | go1.[0-9])
 			match=true
 			;;
 		    "!"$goos | "!"$goarch | "!cgo" | "!"go1.[0-9])
 			;;
 		    *,*)
 			cmatch=true
 			for ctag in `echo $tag | sed -e 's/,/ /g'`; do
 			    case $ctag in
 			    $goos | $goarch | cgo | go1.[0-9])
 				;;
 			    "!"$goos | "!"$goarch | "!cgo" | "!"go1.[0-9])
 				cmatch=false
 				;;
 			    "!"*)
 			        ;;
 			    *)
 				cmatch=false
 				;;
 			    esac
 			done
 			if test "$cmatch" = "true"; then
 			    match=true
 			fi
 			;;
 		    "!"*)
 			match=true
 			;;
 		    esac
 		done

 		if test "$match" = "false" -a "$first" = "false"; then
 		    omatch=false
 		fi

 		if test "$omatch" = "true"; then
 		    gofiles="$gofiles $f"
 		fi
 	    fi
 	done
 	;;
 *)
 	xgofiles=$gofiles
 	gofiles=
 	for f in $xgofiles; do
 	    gofiles="$gofiles `basename $f`"
 	done
 esac

 case "x$gofiles" in
 x)
 	echo 'no test files found' 1>&2
 	exit 1
 	;;
 esac

 # Run any commands given in sources, like
 #   // gotest: $GC foo.go
 # to build any test-only dependencies.
 holdGC="$GC"
 GC="$GC -g -c -I ."
 sed -n 's/^\/\/ gotest: //p' $gofiles | sh
 GC="$holdGC"

 case "x$pkgfiles" in
 x)
 	pkgbasefiles=`ls *.go | grep -v _test.go 2>/dev/null`
 	;;
 *)
 	for f in $pkgfiles; do
 	    pkgbasefiles="$pkgbasefiles `basename $f`"
 	done
 	;;
 esac

 case "x$pkgfiles" in
 x)
 	echo 'no source files found' 1>&2
 	exit 1
 	;;
 esac

 # Split $gofiles into external gofiles (those in *_test packages)
 # and internal ones (those in the main package).
 xgofiles=
 for f in $gofiles; do
     package=`grep '^package[ 	]' $f | sed 1q`
     case "$package" in
     *_test)
 	xgofiles="$xgofiles $f"
 	;;
     *)
 	ngofiles="$ngofiles $f"
 	;;
     esac
 done
 gofiles=$ngofiles

 # External $O file
 xofile=""
 havex=false
 if [ "x$xgofiles" != "x" ]; then
 	xofile="_xtest_.o"
 	havex=true
 fi

 testmain=
 if $havex && fgrep 'func TestMain(' $xgofiles >/dev/null 2>&1; then
   package=`grep '^package[ 	]' $xgofiles | sed 1q | sed -e 's/.* //'`
   testmain="${package}.TestMain"
 elif test -n "$gofiles" && fgrep 'func TestMain(' $gofiles >/dev/null 2>&1; then
   package=`grep '^package[ 	]' $gofiles | sed 1q | sed -e 's/.* //'`
   testmain="${package}.TestMain"
 fi

 set -e

 package=`echo ${srcdir} | sed -e 's|^.*libgo/go/||'`

 pkgpatharg=
 xpkgpatharg=
 prefixarg=
 if test -n "$pkgpath"; then
 	pkgpatharg="-fgo-pkgpath=$pkgpath"
 	xpkgpatharg="-fgo-pkgpath=${pkgpath}_test"
 elif test -n "$prefix"; then
 	prefixarg="-fgo-prefix=$prefix"
 fi

 if test "$trace" = "true"; then
   echo $GC -g $pkgpatharg $prefixarg -c -I . -fno-toplevel-reorder -o _gotest_.o $gofiles $pkgbasefiles
 fi
 $GC -g $pkgpatharg $prefixarg -c -I . -fno-toplevel-reorder -o _gotest_.o $gofiles $pkgbasefiles

 if $havex; then
 	mkdir -p `dirname $package`
 	cp _gotest_.o `dirname $package`/lib`basename $package`.a
 	if test "$trace" = "true"; then
 	    echo $GC -g $xpkgpatharg -c -I . -fno-toplevel-reorder -o $xofile $xgofiles
 	fi
 	$GC -g $xpkgpatharg -c -I . -fno-toplevel-reorder -o $xofile $xgofiles
 fi

 # They all compile; now generate the code to call them.

 testname() {
 	# Remove the package from the name used with the -test option.
 	echo $1 | sed 's/^.*\.//'
 }

 localname() {
 	# The package main has been renamed to __main__ when imported.
 	# Adjust its uses.
 	echo $1 | sed 's/^main\./__main__./'
 }

 {
 	text="T"
 	case "$goarch" in
 	ppc64*) text="[TD]" ;;
 	esac

 	symtogo='sed -e s/_test/XXXtest/ -e s/.*_\([^_]*\.\)/\1/ -e s/XXXtest/_test/'

 	# test functions are named TestFoo
 	# the grep -v eliminates methods and other special names
 	# that have multiple dots.
 	pattern='Test([^a-z].*)?'
 	# The -p option tells GNU nm not to sort.
 	# The -v option tells Solaris nm to sort by value.
 	tests=$($NM -p -v _gotest_.o $xofile | egrep " $text .*\."$pattern'$' | grep -v '\..*\..*\.' | fgrep -v '$' | fgrep -v ' __go_' | sed 's/.* //' | $symtogo)
 	if [ "x$tests" = x ]; then
 		echo 'gotest: warning: no tests matching '$pattern in _gotest_.o $xofile 1>&2
 		exit 2
 	fi
 	# benchmarks are named BenchmarkFoo.
 	pattern='Benchmark([^a-z].*)?'
 	benchmarks=$($NM -p -v _gotest_.o $xofile | egrep " $text .*\."$pattern'$' | grep -v '\..*\..*\.' | fgrep -v '$' | fgrep -v ' __go_' | sed 's/.* //' | $symtogo)

 	# examples are named ExampleFoo
 	pattern='Example([^a-z].*)?'
 	examples=$($NM -p -v _gotest_.o $xofile | egrep " $text .*\."$pattern'$' | grep -v '\..*\..*\.' | fgrep -v '$' | fgrep -v ' __go_' | sed 's/.* //' | $symtogo)

 	# package spec
 	echo 'package main'
 	echo
 	# imports
 	if echo "$tests" | egrep -v '_test\.' >/dev/null; then
 		echo 'import "./_gotest_"'
 	fi
 	if $havex; then
 		echo 'import "./_xtest_"'
 	fi
 	echo 'import "testing"'
 	echo 'import "testing/internal/testdeps"'
 	if ! test -n "$testmain"; then
 		echo 'import __os__ "os"'
 	fi
 	# test array
 	echo
 	echo 'var tests = []testing.InternalTest {'
 	for i in $tests
 	do
 		n=$(testname $i)
 		if test "$n" != "TestMain"; then
 			j=$(localname $i)
 			echo '	{"'$n'", '$j'},'
 		fi
 	done
 	echo '}'

 	# benchmark array
 	# The comment makes the multiline declaration
 	# gofmt-safe even when there are no benchmarks.
 	echo 'var benchmarks = []testing.InternalBenchmark{ //'
 	for i in $benchmarks
 	do
 		n=$(testname $i)
 		j=$(localname $i)
 		echo '	{"'$n'", '$j'},'
 	done
 	echo '}'

 	# examples array
 	echo 'var examples = []testing.InternalExample{ //'
 	# This doesn't work because we don't pick up the output.
 	#for i in $examples
 	#do
 	#	n=$(testname $i)
 	#	j=$(localname $i)
 	#	echo '	{"'$n'", '$j', ""},'
 	#done
 	echo '}'

 	# body
 	echo \
 '
 func main() {
 	m := testing.MainStart(testdeps.TestDeps{}, tests, benchmarks, examples)
 '
 	if test -n "$testmain"; then
 		echo "	${testmain}(m)"
 	else
 		echo '	__os__.Exit(m.Run())'
 	fi

 	echo '}'
 }>_testmain.go

 case "x$dejagnu" in
 xno)
 	if test "$trace" = "true"; then
 	    echo ${GC} -g -c _testmain.go
 	fi
 	${GC} -g -c _testmain.go

 	if test "$trace" = "true"; then
 	    echo ${GL} *.o ${GOLIBS}
 	fi
 	${GL} *.o ${GOLIBS}

 	set +e
 	if test "$bench" = ""; then
 		if test "$trace" = "true"; then
 		    echo ./a.out -test.short -test.timeout=${timeout}s "$@"
 		fi
 		./a.out -test.short -test.timeout=${timeout}s "$@" &
 		pid=$!
 		(sleep `expr $timeout + 10`
 		    echo > gotest-timeout
 		    echo "timed out in gotest" 1>&2
 		    kill -9 $pid) &
 		alarmpid=$!
 		wait $pid
 		status=$?
 		if ! test -f gotest-timeout; then
 		    sleeppid=`ps -o pid,ppid,comm | grep " $alarmpid " | grep sleep | sed -e 's/ *\([0-9]*\) .*$/\1/'`
 		    kill $alarmpid
 		    wait $alarmpid
 		    if test "$sleeppid" != ""; then
 			kill $sleeppid
 		    fi
 		fi
 	else
 		if test "$trace" = "true"; then
 		    echo ./a.out -test.run=^\$ -test.bench="${bench}" "$@"
 		fi
 		./a.out -test.run=^\$ -test.bench="${bench}" "$@"
 		status=$?
 	fi
 	exit $status
 	;;
 xyes)
 	rm -rf ../../testsuite/*.o
 	files=`echo *`
 	for f in $files; do
 		if test "$f" = "_obj" || test "$f" = "_test"; then
 			continue
 		fi
 		rm -rf ../../testsuite/$f
 		if test -f $f; then
 			cp $f ../../testsuite/
 		else
 			ln -s ../$DIR/test/$f ../../testsuite/
 		fi
 	done
 	cd ../../testsuite
 	rm -rf _obj _test
 	mkdir _obj _test
 	if test "$testname" != ""; then
 	    GOTESTNAME="$testname"
 	    export GOTESTNAME
 	fi
 	$MAKE check RUNTESTFLAGS="$RUNTESTFLAGS GOTEST_TMPDIR=$DIR/test"
 	# Useful when using make check-target-libgo
 	cat libgo.log >> libgo-all.log
 	cat libgo.sum >> libgo-all.sum
 	rm -rf $files
 	;;
 esac
	#!/bin/sh
	# Copyright 2009 The Go Authors. All rights reserved.
	# Use of this source code is governed by a BSD-style
	# license that can be found in the LICENSE file.

	# Using all the *_test.go files in the current directory, write out a file
	# _testmain.go that runs all its tests. Compile everything and run the
	# tests.
	# If files are named on the command line, use them instead of *_test.go.

	# Makes egrep,grep work better in general if we put them
	# in ordinary C mode instead of what the current language is.
	LANG=C
	LC_ALL=C
	LC_CTYPE=C
	export LANG LC_ALL LC_CTYPE

	GC=${GC:-gccgo}
	GL=${GL:-${GC-gccgo}}
	GOLIBS=${GOLIBS:-}
	export GC GL GOLIBS

	NM=${NM:-nm}

	# srcdir is where the source files are found. basedir is where the
	# source file paths are relative to.
	# gofiles are the test files. pkgfiles are the source files.
	srcdir=.
	basedir=.
	goarch=""
	gofiles=""
	goos=""
	pkgfiles=""
	loop=true
	keep=false
	pkgpath=
	prefix=
	dejagnu=no
	timeout=240
	testname=""
	bench=""
	trace=false
	while $loop; do
	case "x$1" in
	x--srcdir)
	srcdir=$2
	shift
	shift
	;;
	x--srcdir=*)
	srcdir=`echo $1 \| sed -e 's/^--srcdir=//'`
	shift
	;;
	x--basedir)
	basedir=$2
	shift
	shift
	;;
	x--basedir=*)
	basedir=`echo $1 \| sed -e 's/^--basedir=//'`
	shift
	;;
	x--goarch)
	goarch=$2
	shift
	shift
	;;
	x--goarch=*)
	goarch=`echo $1 \| sed -e 's/^--goarch=//'`
	shift
	;;
	x--goos)
	goos=$2
	shift
	shift
	;;
	x--goos=*)
	goos=`echo $1 \| sed -e 's/^--goos=//'`
	shift
	;;
	x--pkgpath)
	pkgpath=$2
	shift
	shift
	;;
	x--pkgpath=*)
	pkgpath=`echo $1 \| sed -e 's/^--pkgpath=//'`
	shift
	;;
	x--prefix)
	prefix=$2
	shift
	shift
	;;
	x--prefix=*)
	prefix=`echo $1 \| sed -e 's/^--prefix=//'`
	shift
	;;
	x--keep)
	keep=true
	shift
	;;
	x--pkgfiles)
	pkgfiles=$2
	shift
	shift
	;;
	x--pkgfiles=*)
	pkgfiles=`echo $1 \| sed -e 's/^--pkgfiles=//'`
	shift
	;;
	x--dejagnu)
	dejagnu=$2
	shift
	shift
	;;
	x--dejagnu=*)
	dejagnu=`echo $1 \| sed -e 's/^--dejagnu=//'`
	shift
	;;
	x--timeout)
	timeout=$2
	shift
	shift
	;;
	x--timeout=*)
	timeout=`echo $1 \| sed -e 's/^--timeout=//'`
	shift
	;;
	x--testname)
	testname=$2
	shift
	shift
	;;
	x--testname=*)
	testname=`echo $1 \| sed -e 's/^--testname=//'`
	shift
	;;
	x--bench)
	bench=$2
	shift
	shift
	;;
	x--bench=*)
	bench=`echo $1 \| sed -e 's/^--bench=//'`
	shift
	;;
	x--trace)
	trace=true
	shift
	;;
	x-*)
	loop=false
	;;
	x)
	loop=false
	;;
	*)
	gofiles="$gofiles $1"
	shift
	;;
	esac
	done

	DIR=gotest$$
	rm -rf $DIR
	mkdir $DIR

	cd $DIR
	mkdir test
	cd test

	if test $keep = false; then
	trap "cd ../..; rm -rf $DIR" 0 1 2 3 14 15
	else
	trap "cd ../..; echo Keeping $DIR" 0 1 2 3 14 15
	fi

	case "$srcdir" in
	/*)
	;;
	*)
	srcdir="../../$srcdir"
	;;
	esac

	SRCDIR=$srcdir
	export SRCDIR

	case "$basedir" in
	/*)
	;;
	*)
	basedir="../../$basedir"
	;;
	esac

	# Link all the files/directories in srcdir into our working directory,
	# so that the tests do not have to refer to srcdir to find test data.
	ln -s $srcdir/* .

	# Some tests refer to a ../testdata directory.
	if test -e $srcdir/../testdata; then
	rm -f ../testdata
	abssrcdir=`cd $srcdir && pwd`
	ln -s $abssrcdir/../testdata ../testdata
	fi

	# Copy the .go files because io/utils_test.go expects a regular file.
	case "x$gofiles" in
	x)
	case "x$pkgfiles" in
	x)
	for f in `cd $srcdir; ls *.go`; do
	rm -f $f;
	cp $srcdir/$f .
	done
	;;
	*)
	for f in $pkgfiles; do
	case $f in
	/*)
	b=`basename $f`
	rm -f $b
	cp $f $b
	;;
	*)
	if test -f $basedir/$f; then
	b=`basename $f`
	rm -f $b
	cp $basedir/$f $b
	elif test -f ../../$f; then
	b=`basename $f`
	rm -f $b
	cp ../../$f $b
	else
	echo "file $f not found" 1>&2
	exit 1
	fi
	;;
	esac
	done
	for f in `cd $srcdir; ls *_test.go`; do
	rm -f $f
	cp $srcdir/$f .
	done
	;;
	esac
	;;
	*)
	for f in $gofiles; do
	b=`basename $f`
	rm -f $b
	cp $basedir/$f $b
	done
	case "x$pkgfiles" in
	x)
	for f in `cd $srcdir; ls .go \| grep -v _test.go`; do
	rm -f $f
	cp $srcdir/$f .
	done
	;;
	*)
	for f in $pkgfiles; do
	case $f in
	/*)
	b=`basename $f`
	rm -f $b
	cp $f $b
	;;
	*)
	if test -f $basedir/$f; then
	b=`basename $f`
	rm -f $b
	cp $basedir/$f $b
	elif test -f ../../$f; then
	b=`basename $f`
	rm -f $b
	cp ../../$f $b
	else
	echo "file $f not found" 1>&2
	exit 1
	fi
	;;
	esac
	done
	;;
	esac
	;;
	esac

	# Some tests expect the _obj directory created by the gc Makefiles.
	mkdir _obj

	# Some tests expect the _test directory created by the gc Makefiles.
	mkdir _test

	case "x$gofiles" in
	x)
	for f in `ls *_test.go`; do
	tag1=`echo $f \| sed -e 's/^._\([^_]\)_test.go$/\1/'`
	tag2=`echo $f \| sed -e 's/^._\([^_]\)_[^_]*_test.go$/\1/'`
	if test x$tag1 = x$f; then
	tag1=
	fi
	if test x$tag2 = x$f; then
	tag2=
	fi

	case "$tag1" in
	"") ;;
	$goarch) ;;
	$goos) ;;
	aix \| android \| darwin \| dragonfly \| freebsd \| linux \| nacl \| netbsd \| openbsd \| plan9 \| solaris \| windows)
	tag1=nonmatchingtag
	;;
	386 \| amd64 \| amd64p32 \| arm \| armbe \| arm64 \| arm64be \| alpha \| ia64 \| m68k \| ppc64 \| ppc64le \| mips \| mipsle \| mips64 \| mips64le \| mips64p32 \| mips64p32le \| ppc \| s390 \| s390x \| sparc \| sparc64)
	tag1=nonmatchingtag
	;;
	esac

	case "$tag2" in
	"") ;;
	$goarch) ;;
	$goos) ;;
	aix \| android \| darwin \| dragonfly \| freebsd \| linux \| nacl \| netbsd \| openbsd \| plan9 \| solaris \| windows)
	tag2=nonmatchingtag
	;;
	386 \| amd64 \| amd64p32 \| arm \| armbe \| arm64 \| arm64be \| alpha \| ia64 \| m68k \| ppc64 \| ppc64le \| mips \| mipsle \| mips64 \| mips64le \| mips64p32 \| mips64p32le \| ppc \| s390 \| s390x \| sparc \| sparc64)
	tag2=nonmatchingtag
	;;
	esac

	if test x$tag1 != xnonmatchingtag -a x$tag2 != xnonmatchingtag; then
	tags=`sed '/^package /q' < $f \| grep '^// +build '`
	omatch=true
	first=true
	match=false
	for tag in $tags; do
	case $tag in
	"//")
	;;
	"+build")
	if test "$first" = "true"; then
	first=false
	elif test "$match" = "false"; then
	omatch=false
	fi
	match=false
	;;
	$goos \| $goarch \| cgo \| go1.[0-9])
	match=true
	;;
	"!"$goos \| "!"$goarch \| "!cgo" \| "!"go1.[0-9])
	;;
	,)
	cmatch=true
	for ctag in `echo $tag \| sed -e 's/,/ /g'`; do
	case $ctag in
	$goos \| $goarch \| cgo \| go1.[0-9])
	;;
	"!"$goos \| "!"$goarch \| "!cgo" \| "!"go1.[0-9])
	cmatch=false
	;;
	"!"*)
	;;
	*)
	cmatch=false
	;;
	esac
	done
	if test "$cmatch" = "true"; then
	match=true
	fi
	;;
	"!"*)
	match=true
	;;
	esac
	done

	if test "$match" = "false" -a "$first" = "false"; then
	omatch=false
	fi

	if test "$omatch" = "true"; then
	gofiles="$gofiles $f"
	fi
	fi
	done
	;;
	*)
	xgofiles=$gofiles
	gofiles=
	for f in $xgofiles; do
	gofiles="$gofiles `basename $f`"
	done
	esac

	case "x$gofiles" in
	x)
	echo 'no test files found' 1>&2
	exit 1
	;;
	esac

	# Run any commands given in sources, like
	# // gotest: $GC foo.go
	# to build any test-only dependencies.
	holdGC="$GC"
	GC="$GC -g -c -I ."
	sed -n 's/^\/\/ gotest: //p' $gofiles \| sh
	GC="$holdGC"

	case "x$pkgfiles" in
	x)
	pkgbasefiles=`ls *.go \| grep -v _test.go 2>/dev/null`
	;;
	*)
	for f in $pkgfiles; do
	pkgbasefiles="$pkgbasefiles `basename $f`"
	done
	;;
	esac

	case "x$pkgfiles" in
	x)
	echo 'no source files found' 1>&2
	exit 1
	;;
	esac

	# Split $gofiles into external gofiles (those in *_test packages)
	# and internal ones (those in the main package).
	xgofiles=
	for f in $gofiles; do
	package=`grep '^package[ ]' $f \| sed 1q`
	case "$package" in
	*_test)
	xgofiles="$xgofiles $f"
	;;
	*)
	ngofiles="$ngofiles $f"
	;;
	esac
	done
	gofiles=$ngofiles

	# External $O file
	xofile=""
	havex=false
	if [ "x$xgofiles" != "x" ]; then
	xofile="_xtest_.o"
	havex=true
	fi

	testmain=
	if $havex && fgrep 'func TestMain(' $xgofiles >/dev/null 2>&1; then
	package=`grep '^package[ ]' $xgofiles \| sed 1q \| sed -e 's/.* //'`
	testmain="${package}.TestMain"
	elif test -n "$gofiles" && fgrep 'func TestMain(' $gofiles >/dev/null 2>&1; then
	package=`grep '^package[ ]' $gofiles \| sed 1q \| sed -e 's/.* //'`
	testmain="${package}.TestMain"
	fi

	set -e

	package=`echo ${srcdir} \| sed -e 's\|^.*libgo/go/\|\|'`

	pkgpatharg=
	xpkgpatharg=
	prefixarg=
	if test -n "$pkgpath"; then
	pkgpatharg="-fgo-pkgpath=$pkgpath"
	xpkgpatharg="-fgo-pkgpath=${pkgpath}_test"
	elif test -n "$prefix"; then
	prefixarg="-fgo-prefix=$prefix"
	fi

	if test "$trace" = "true"; then
	echo $GC -g $pkgpatharg $prefixarg -c -I . -fno-toplevel-reorder -o _gotest_.o $gofiles $pkgbasefiles
	fi
	$GC -g $pkgpatharg $prefixarg -c -I . -fno-toplevel-reorder -o _gotest_.o $gofiles $pkgbasefiles

	if $havex; then
	mkdir -p `dirname $package`
	cp _gotest_.o `dirname $package`/lib`basename $package`.a
	if test "$trace" = "true"; then
	echo $GC -g $xpkgpatharg -c -I . -fno-toplevel-reorder -o $xofile $xgofiles
	fi
	$GC -g $xpkgpatharg -c -I . -fno-toplevel-reorder -o $xofile $xgofiles
	fi

	# They all compile; now generate the code to call them.

	testname() {
	# Remove the package from the name used with the -test option.
	echo $1 \| sed 's/^.*\.//'
	}

	localname() {
	# The package main has been renamed to __main__ when imported.
	# Adjust its uses.
	echo $1 \| sed 's/^main\./__main__./'
	}

	{
	text="T"
	case "$goarch" in
	ppc64*) text="[TD]" ;;
	esac

	symtogo='sed -e s/_test/XXXtest/ -e s/._\([^_]\.\)/\1/ -e s/XXXtest/_test/'

	# test functions are named TestFoo
	# the grep -v eliminates methods and other special names
	# that have multiple dots.
	pattern='Test([^a-z].*)?'
	# The -p option tells GNU nm not to sort.
	# The -v option tells Solaris nm to sort by value.
	tests=$($NM -p -v _gotest_.o $xofile \| egrep " $text .\."$pattern'$' \| grep -v '\..\..\.' \| fgrep -v '$' \| fgrep -v ' __go_' \| sed 's/. //' \| $symtogo)
	if [ "x$tests" = x ]; then
	echo 'gotest: warning: no tests matching '$pattern in _gotest_.o $xofile 1>&2
	exit 2
	fi
	# benchmarks are named BenchmarkFoo.
	pattern='Benchmark([^a-z].*)?'
	benchmarks=$($NM -p -v _gotest_.o $xofile \| egrep " $text .\."$pattern'$' \| grep -v '\..\..\.' \| fgrep -v '$' \| fgrep -v ' __go_' \| sed 's/. //' \| $symtogo)

	# examples are named ExampleFoo
	pattern='Example([^a-z].*)?'
	examples=$($NM -p -v _gotest_.o $xofile \| egrep " $text .\."$pattern'$' \| grep -v '\..\..\.' \| fgrep -v '$' \| fgrep -v ' __go_' \| sed 's/. //' \| $symtogo)

	# package spec
	echo 'package main'
	echo
	# imports
	if echo "$tests" \| egrep -v '_test\.' >/dev/null; then
	echo 'import "./_gotest_"'
	fi
	if $havex; then
	echo 'import "./_xtest_"'
	fi
	echo 'import "testing"'
	echo 'import "testing/internal/testdeps"'
	if ! test -n "$testmain"; then
	echo 'import __os__ "os"'
	fi
	# test array
	echo
	echo 'var tests = []testing.InternalTest {'
	for i in $tests
	do
	n=$(testname $i)
	if test "$n" != "TestMain"; then
	j=$(localname $i)
	echo ' {"'$n'", '$j'},'
	fi
	done
	echo '}'

	# benchmark array
	# The comment makes the multiline declaration
	# gofmt-safe even when there are no benchmarks.
	echo 'var benchmarks = []testing.InternalBenchmark{ //'
	for i in $benchmarks
	do
	n=$(testname $i)
	j=$(localname $i)
	echo ' {"'$n'", '$j'},'
	done
	echo '}'

	# examples array
	echo 'var examples = []testing.InternalExample{ //'
	# This doesn't work because we don't pick up the output.
	#for i in $examples
	#do
	# n=$(testname $i)
	# j=$(localname $i)
	# echo ' {"'$n'", '$j', ""},'
	#done
	echo '}'

	# body
	echo \
	'
	func main() {
	m := testing.MainStart(testdeps.TestDeps{}, tests, benchmarks, examples)
	'
	if test -n "$testmain"; then
	echo " ${testmain}(m)"
	else
	echo ' __os__.Exit(m.Run())'
	fi

	echo '}'
	}>_testmain.go

	case "x$dejagnu" in
	xno)
	if test "$trace" = "true"; then
	echo ${GC} -g -c _testmain.go
	fi
	${GC} -g -c _testmain.go

	if test "$trace" = "true"; then
	echo ${GL} *.o ${GOLIBS}
	fi
	${GL} *.o ${GOLIBS}

	set +e
	if test "$bench" = ""; then
	if test "$trace" = "true"; then
	echo ./a.out -test.short -test.timeout=${timeout}s "$@"
	fi
	./a.out -test.short -test.timeout=${timeout}s "$@" &
	pid=$!
	(sleep `expr $timeout + 10`
	echo > gotest-timeout
	echo "timed out in gotest" 1>&2
	kill -9 $pid) &
	alarmpid=$!
	wait $pid
	status=$?
	if ! test -f gotest-timeout; then
	sleeppid=`ps -o pid,ppid,comm \| grep " $alarmpid " \| grep sleep \| sed -e 's/ \([0-9]\) .*$/\1/'`
	kill $alarmpid
	wait $alarmpid
	if test "$sleeppid" != ""; then
	kill $sleeppid
	fi
	fi
	else
	if test "$trace" = "true"; then
	echo ./a.out -test.run=^\$ -test.bench="${bench}" "$@"
	fi
	./a.out -test.run=^\$ -test.bench="${bench}" "$@"
	status=$?
	fi
	exit $status
	;;
	xyes)
	rm -rf ../../testsuite/*.o
	files=`echo *`
	for f in $files; do
	if test "$f" = "_obj" \|\| test "$f" = "_test"; then
	continue
	fi
	rm -rf ../../testsuite/$f
	if test -f $f; then
	cp $f ../../testsuite/
	else
	ln -s ../$DIR/test/$f ../../testsuite/
	fi
	done
	cd ../../testsuite
	rm -rf _obj _test
	mkdir _obj _test
	if test "$testname" != ""; then
	GOTESTNAME="$testname"
	export GOTESTNAME
	fi
	$MAKE check RUNTESTFLAGS="$RUNTESTFLAGS GOTEST_TMPDIR=$DIR/test"
	# Useful when using make check-target-libgo
	cat libgo.log >> libgo-all.log
	cat libgo.sum >> libgo-all.sum
	rm -rf $files
	;;
	esac