src/runtime/extern.go - go - Git at Google

 // Copyright 2009 The Go Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.

 /*
 Package runtime contains operations that interact with Go's runtime system,
 such as functions to control goroutines. It also includes the low-level type information
 used by the reflect package; see reflect's documentation for the programmable
 interface to the run-time type system.

 Environment Variables

 The following environment variables ($name or %name%, depending on the host
 operating system) control the run-time behavior of Go programs. The meanings
 and use may change from release to release.

 The GOGC variable sets the initial garbage collection target percentage.
 A collection is triggered when the ratio of freshly allocated data to live data
 remaining after the previous collection reaches this percentage. The default
 is GOGC=100. Setting GOGC=off disables the garbage collector entirely.
 The runtime/debug package's SetGCPercent function allows changing this
 percentage at run time. See https://golang.org/pkg/runtime/debug/#SetGCPercent.

 The GODEBUG variable controls debugging variables within the runtime.
 It is a comma-separated list of name=val pairs setting these named variables:

 	allocfreetrace: setting allocfreetrace=1 causes every allocation to be
 	profiled and a stack trace printed on each object's allocation and free.

 	cgocheck: setting cgocheck=0 disables all checks for packages
 	using cgo to incorrectly pass Go pointers to non-Go code.
 	Setting cgocheck=1 (the default) enables relatively cheap
 	checks that may miss some errors.  Setting cgocheck=2 enables
 	expensive checks that should not miss any errors, but will
 	cause your program to run slower.

 	efence: setting efence=1 causes the allocator to run in a mode
 	where each object is allocated on a unique page and addresses are
 	never recycled.

 	gccheckmark: setting gccheckmark=1 enables verification of the
 	garbage collector's concurrent mark phase by performing a
 	second mark pass while the world is stopped.  If the second
 	pass finds a reachable object that was not found by concurrent
 	mark, the garbage collector will panic.

 	gcpacertrace: setting gcpacertrace=1 causes the garbage collector to
 	print information about the internal state of the concurrent pacer.

 	gcshrinkstackoff: setting gcshrinkstackoff=1 disables moving goroutines
 	onto smaller stacks. In this mode, a goroutine's stack can only grow.

 	gcstoptheworld: setting gcstoptheworld=1 disables concurrent garbage collection,
 	making every garbage collection a stop-the-world event. Setting gcstoptheworld=2
 	also disables concurrent sweeping after the garbage collection finishes.

 	gctrace: setting gctrace=1 causes the garbage collector to emit a single line to standard
 	error at each collection, summarizing the amount of memory collected and the
 	length of the pause. The format of this line is subject to change.
 	Currently, it is:
 		gc # @#s #%: #+#+# ms clock, #+#/#/#+# ms cpu, #->#-># MB, # MB goal, # P
 	where the fields are as follows:
 		gc #        the GC number, incremented at each GC
 		@#s         time in seconds since program start
 		#%          percentage of time spent in GC since program start
 		#+...+#     wall-clock/CPU times for the phases of the GC
 		#->#-># MB  heap size at GC start, at GC end, and live heap
 		# MB goal   goal heap size
 		# P         number of processors used
 	The phases are stop-the-world (STW) sweep termination, concurrent
 	mark and scan, and STW mark termination. The CPU times
 	for mark/scan are broken down in to assist time (GC performed in
 	line with allocation), background GC time, and idle GC time.
 	If the line ends with "(forced)", this GC was forced by a
 	runtime.GC() call.

 	Setting gctrace to any value > 0 also causes the garbage collector
 	to emit a summary when memory is released back to the system.
 	This process of returning memory to the system is called scavenging.
 	The format of this summary is subject to change.
 	Currently it is:
 		scvg#: # MB released  printed only if non-zero
 		scvg#: inuse: # idle: # sys: # released: # consumed: # (MB)
 	where the fields are as follows:
 		scvg#        the scavenge cycle number, incremented at each scavenge
 		inuse: #     MB used or partially used spans
 		idle: #      MB spans pending scavenging
 		sys: #       MB mapped from the system
 		released: #  MB released to the system
 		consumed: #  MB allocated from the system

 	madvdontneed: setting madvdontneed=1 will use MADV_DONTNEED
 	instead of MADV_FREE on Linux when returning memory to the
 	kernel. This is less efficient, but causes RSS numbers to drop
 	more quickly.

 	memprofilerate: setting memprofilerate=X will update the value of runtime.MemProfileRate.
 	When set to 0 memory profiling is disabled.  Refer to the description of
 	MemProfileRate for the default value.

 	invalidptr: defaults to invalidptr=1, causing the garbage collector and stack
 	copier to crash the program if an invalid pointer value (for example, 1)
 	is found in a pointer-typed location. Setting invalidptr=0 disables this check.
 	This should only be used as a temporary workaround to diagnose buggy code.
 	The real fix is to not store integers in pointer-typed locations.

 	sbrk: setting sbrk=1 replaces the memory allocator and garbage collector
 	with a trivial allocator that obtains memory from the operating system and
 	never reclaims any memory.

 	scavenge: scavenge=1 enables debugging mode of heap scavenger.

 	scheddetail: setting schedtrace=X and scheddetail=1 causes the scheduler to emit
 	detailed multiline info every X milliseconds, describing state of the scheduler,
 	processors, threads and goroutines.

 	schedtrace: setting schedtrace=X causes the scheduler to emit a single line to standard
 	error every X milliseconds, summarizing the scheduler state.

 	tracebackancestors: setting tracebackancestors=N extends tracebacks with the stacks at
 	which goroutines were created, where N limits the number of ancestor goroutines to
 	report. This also extends the information returned by runtime.Stack. Ancestor's goroutine
 	IDs will refer to the ID of the goroutine at the time of creation; it's possible for this
 	ID to be reused for another goroutine. Setting N to 0 will report no ancestry information.

 The net and net/http packages also refer to debugging variables in GODEBUG.
 See the documentation for those packages for details.

 The GOMAXPROCS variable limits the number of operating system threads that
 can execute user-level Go code simultaneously. There is no limit to the number of threads
 that can be blocked in system calls on behalf of Go code; those do not count against
 the GOMAXPROCS limit. This package's GOMAXPROCS function queries and changes
 the limit.

 The GOTRACEBACK variable controls the amount of output generated when a Go
 program fails due to an unrecovered panic or an unexpected runtime condition.
 By default, a failure prints a stack trace for the current goroutine,
 eliding functions internal to the run-time system, and then exits with exit code 2.
 The failure prints stack traces for all goroutines if there is no current goroutine
 or the failure is internal to the run-time.
 GOTRACEBACK=none omits the goroutine stack traces entirely.
 GOTRACEBACK=single (the default) behaves as described above.
 GOTRACEBACK=all adds stack traces for all user-created goroutines.
 GOTRACEBACK=system is like ``all'' but adds stack frames for run-time functions
 and shows goroutines created internally by the run-time.
 GOTRACEBACK=crash is like ``system'' but crashes in an operating system-specific
 manner instead of exiting. For example, on Unix systems, the crash raises
 SIGABRT to trigger a core dump.
 For historical reasons, the GOTRACEBACK settings 0, 1, and 2 are synonyms for
 none, all, and system, respectively.
 The runtime/debug package's SetTraceback function allows increasing the
 amount of output at run time, but it cannot reduce the amount below that
 specified by the environment variable.
 See https://golang.org/pkg/runtime/debug/#SetTraceback.

 The GOARCH, GOOS, GOPATH, and GOROOT environment variables complete
 the set of Go environment variables. They influence the building of Go programs
 (see https://golang.org/cmd/go and https://golang.org/pkg/go/build).
 GOARCH, GOOS, and GOROOT are recorded at compile time and made available by
 constants or functions in this package, but they do not influence the execution
 of the run-time system.
 */
 package runtime

 import "runtime/internal/sys"

 // Caller reports file and line number information about function invocations on
 // the calling goroutine's stack. The argument skip is the number of stack frames
 // to ascend, with 0 identifying the caller of Caller.  (For historical reasons the
 // meaning of skip differs between Caller and Callers.) The return values report the
 // program counter, file name, and line number within the file of the corresponding
 // call. The boolean ok is false if it was not possible to recover the information.
 func Caller(skip int) (pc uintptr, file string, line int, ok bool) {
 	rpc := make([]uintptr, 1)
 	n := callers(skip+1, rpc[:])
 	if n < 1 {
 		return
 	}
 	frame, _ := CallersFrames(rpc).Next()
 	return frame.PC, frame.File, frame.Line, frame.PC != 0
 }

 // Callers fills the slice pc with the return program counters of function invocations
 // on the calling goroutine's stack. The argument skip is the number of stack frames
 // to skip before recording in pc, with 0 identifying the frame for Callers itself and
 // 1 identifying the caller of Callers.
 // It returns the number of entries written to pc.
 //
 // To translate these PCs into symbolic information such as function
 // names and line numbers, use CallersFrames. CallersFrames accounts
 // for inlined functions and adjusts the return program counters into
 // call program counters. Iterating over the returned slice of PCs
 // directly is discouraged, as is using FuncForPC on any of the
 // returned PCs, since these cannot account for inlining or return
 // program counter adjustment.
 //go:noinline
 func Callers(skip int, pc []uintptr) int {
 	// runtime.callers uses pc.array==nil as a signal
 	// to print a stack trace. Pick off 0-length pc here
 	// so that we don't let a nil pc slice get to it.
 	if len(pc) == 0 {
 		return 0
 	}
 	return callers(skip, pc)
 }

 // GOROOT returns the root of the Go tree. It uses the
 // GOROOT environment variable, if set at process start,
 // or else the root used during the Go build.
 func GOROOT() string {
 	s := gogetenv("GOROOT")
 	if s != "" {
 		return s
 	}
 	return sys.DefaultGoroot
 }

 // Version returns the Go tree's version string.
 // It is either the commit hash and date at the time of the build or,
 // when possible, a release tag like "go1.3".
 func Version() string {
 	return sys.TheVersion
 }

 // GOOS is the running program's operating system target:
 // one of darwin, freebsd, linux, and so on.
 // To view possible combinations of GOOS and GOARCH, run "go tool dist list".
 const GOOS string = sys.GOOS

 // GOARCH is the running program's architecture target:
 // one of 386, amd64, arm, s390x, and so on.
 const GOARCH string = sys.GOARCH
	// Copyright 2009 The Go Authors. All rights reserved.
	// Use of this source code is governed by a BSD-style
	// license that can be found in the LICENSE file.

	/*
	Package runtime contains operations that interact with Go's runtime system,
	such as functions to control goroutines. It also includes the low-level type information
	used by the reflect package; see reflect's documentation for the programmable
	interface to the run-time type system.

	Environment Variables

	The following environment variables ($name or %name%, depending on the host
	operating system) control the run-time behavior of Go programs. The meanings
	and use may change from release to release.

	The GOGC variable sets the initial garbage collection target percentage.
	A collection is triggered when the ratio of freshly allocated data to live data
	remaining after the previous collection reaches this percentage. The default
	is GOGC=100. Setting GOGC=off disables the garbage collector entirely.
	The runtime/debug package's SetGCPercent function allows changing this
	percentage at run time. See https://golang.org/pkg/runtime/debug/#SetGCPercent.

	The GODEBUG variable controls debugging variables within the runtime.
	It is a comma-separated list of name=val pairs setting these named variables:

	allocfreetrace: setting allocfreetrace=1 causes every allocation to be
	profiled and a stack trace printed on each object's allocation and free.

	cgocheck: setting cgocheck=0 disables all checks for packages
	using cgo to incorrectly pass Go pointers to non-Go code.
	Setting cgocheck=1 (the default) enables relatively cheap
	checks that may miss some errors. Setting cgocheck=2 enables
	expensive checks that should not miss any errors, but will
	cause your program to run slower.

	efence: setting efence=1 causes the allocator to run in a mode
	where each object is allocated on a unique page and addresses are
	never recycled.

	gccheckmark: setting gccheckmark=1 enables verification of the
	garbage collector's concurrent mark phase by performing a
	second mark pass while the world is stopped. If the second
	pass finds a reachable object that was not found by concurrent
	mark, the garbage collector will panic.

	gcpacertrace: setting gcpacertrace=1 causes the garbage collector to
	print information about the internal state of the concurrent pacer.

	gcshrinkstackoff: setting gcshrinkstackoff=1 disables moving goroutines
	onto smaller stacks. In this mode, a goroutine's stack can only grow.

	gcstoptheworld: setting gcstoptheworld=1 disables concurrent garbage collection,
	making every garbage collection a stop-the-world event. Setting gcstoptheworld=2
	also disables concurrent sweeping after the garbage collection finishes.

	gctrace: setting gctrace=1 causes the garbage collector to emit a single line to standard
	error at each collection, summarizing the amount of memory collected and the
	length of the pause. The format of this line is subject to change.
	Currently, it is:
	gc # @#s #%: #+#+# ms clock, #+#/#/#+# ms cpu, #->#-># MB, # MB goal, # P
	where the fields are as follows:
	gc # the GC number, incremented at each GC
	@#s time in seconds since program start
	#% percentage of time spent in GC since program start
	#+...+# wall-clock/CPU times for the phases of the GC
	#->#-># MB heap size at GC start, at GC end, and live heap
	# MB goal goal heap size
	# P number of processors used
	The phases are stop-the-world (STW) sweep termination, concurrent
	mark and scan, and STW mark termination. The CPU times
	for mark/scan are broken down in to assist time (GC performed in
	line with allocation), background GC time, and idle GC time.
	If the line ends with "(forced)", this GC was forced by a
	runtime.GC() call.

	Setting gctrace to any value > 0 also causes the garbage collector
	to emit a summary when memory is released back to the system.
	This process of returning memory to the system is called scavenging.
	The format of this summary is subject to change.
	Currently it is:
	scvg#: # MB released printed only if non-zero
	scvg#: inuse: # idle: # sys: # released: # consumed: # (MB)
	where the fields are as follows:
	scvg# the scavenge cycle number, incremented at each scavenge
	inuse: # MB used or partially used spans
	idle: # MB spans pending scavenging
	sys: # MB mapped from the system
	released: # MB released to the system
	consumed: # MB allocated from the system

	madvdontneed: setting madvdontneed=1 will use MADV_DONTNEED
	instead of MADV_FREE on Linux when returning memory to the
	kernel. This is less efficient, but causes RSS numbers to drop
	more quickly.

	memprofilerate: setting memprofilerate=X will update the value of runtime.MemProfileRate.
	When set to 0 memory profiling is disabled. Refer to the description of
	MemProfileRate for the default value.

	invalidptr: defaults to invalidptr=1, causing the garbage collector and stack
	copier to crash the program if an invalid pointer value (for example, 1)
	is found in a pointer-typed location. Setting invalidptr=0 disables this check.
	This should only be used as a temporary workaround to diagnose buggy code.
	The real fix is to not store integers in pointer-typed locations.

	sbrk: setting sbrk=1 replaces the memory allocator and garbage collector
	with a trivial allocator that obtains memory from the operating system and
	never reclaims any memory.

	scavenge: scavenge=1 enables debugging mode of heap scavenger.

	scheddetail: setting schedtrace=X and scheddetail=1 causes the scheduler to emit
	detailed multiline info every X milliseconds, describing state of the scheduler,
	processors, threads and goroutines.

	schedtrace: setting schedtrace=X causes the scheduler to emit a single line to standard
	error every X milliseconds, summarizing the scheduler state.

	tracebackancestors: setting tracebackancestors=N extends tracebacks with the stacks at
	which goroutines were created, where N limits the number of ancestor goroutines to
	report. This also extends the information returned by runtime.Stack. Ancestor's goroutine
	IDs will refer to the ID of the goroutine at the time of creation; it's possible for this
	ID to be reused for another goroutine. Setting N to 0 will report no ancestry information.

	The net and net/http packages also refer to debugging variables in GODEBUG.
	See the documentation for those packages for details.

	The GOMAXPROCS variable limits the number of operating system threads that
	can execute user-level Go code simultaneously. There is no limit to the number of threads
	that can be blocked in system calls on behalf of Go code; those do not count against
	the GOMAXPROCS limit. This package's GOMAXPROCS function queries and changes
	the limit.

	The GOTRACEBACK variable controls the amount of output generated when a Go
	program fails due to an unrecovered panic or an unexpected runtime condition.
	By default, a failure prints a stack trace for the current goroutine,
	eliding functions internal to the run-time system, and then exits with exit code 2.
	The failure prints stack traces for all goroutines if there is no current goroutine
	or the failure is internal to the run-time.
	GOTRACEBACK=none omits the goroutine stack traces entirely.
	GOTRACEBACK=single (the default) behaves as described above.
	GOTRACEBACK=all adds stack traces for all user-created goroutines.
	GOTRACEBACK=system is like ``all'' but adds stack frames for run-time functions
	and shows goroutines created internally by the run-time.
	GOTRACEBACK=crash is like ``system'' but crashes in an operating system-specific
	manner instead of exiting. For example, on Unix systems, the crash raises
	SIGABRT to trigger a core dump.
	For historical reasons, the GOTRACEBACK settings 0, 1, and 2 are synonyms for
	none, all, and system, respectively.
	The runtime/debug package's SetTraceback function allows increasing the
	amount of output at run time, but it cannot reduce the amount below that
	specified by the environment variable.
	See https://golang.org/pkg/runtime/debug/#SetTraceback.

	The GOARCH, GOOS, GOPATH, and GOROOT environment variables complete
	the set of Go environment variables. They influence the building of Go programs
	(see https://golang.org/cmd/go and https://golang.org/pkg/go/build).
	GOARCH, GOOS, and GOROOT are recorded at compile time and made available by
	constants or functions in this package, but they do not influence the execution
	of the run-time system.
	*/
	package runtime

	import "runtime/internal/sys"

	// Caller reports file and line number information about function invocations on
	// the calling goroutine's stack. The argument skip is the number of stack frames
	// to ascend, with 0 identifying the caller of Caller. (For historical reasons the
	// meaning of skip differs between Caller and Callers.) The return values report the
	// program counter, file name, and line number within the file of the corresponding
	// call. The boolean ok is false if it was not possible to recover the information.
	func Caller(skip int) (pc uintptr, file string, line int, ok bool) {
	rpc := make([]uintptr, 1)
	n := callers(skip+1, rpc[:])
	if n < 1 {
	return
	}
	frame, _ := CallersFrames(rpc).Next()
	return frame.PC, frame.File, frame.Line, frame.PC != 0
	}

	// Callers fills the slice pc with the return program counters of function invocations
	// on the calling goroutine's stack. The argument skip is the number of stack frames
	// to skip before recording in pc, with 0 identifying the frame for Callers itself and
	// 1 identifying the caller of Callers.
	// It returns the number of entries written to pc.
	//
	// To translate these PCs into symbolic information such as function
	// names and line numbers, use CallersFrames. CallersFrames accounts
	// for inlined functions and adjusts the return program counters into
	// call program counters. Iterating over the returned slice of PCs
	// directly is discouraged, as is using FuncForPC on any of the
	// returned PCs, since these cannot account for inlining or return
	// program counter adjustment.
	//go:noinline
	func Callers(skip int, pc []uintptr) int {
	// runtime.callers uses pc.array==nil as a signal
	// to print a stack trace. Pick off 0-length pc here
	// so that we don't let a nil pc slice get to it.
	if len(pc) == 0 {
	return 0
	}
	return callers(skip, pc)
	}

	// GOROOT returns the root of the Go tree. It uses the
	// GOROOT environment variable, if set at process start,
	// or else the root used during the Go build.
	func GOROOT() string {
	s := gogetenv("GOROOT")
	if s != "" {
	return s
	}
	return sys.DefaultGoroot
	}

	// Version returns the Go tree's version string.
	// It is either the commit hash and date at the time of the build or,
	// when possible, a release tag like "go1.3".
	func Version() string {
	return sys.TheVersion
	}

	// GOOS is the running program's operating system target:
	// one of darwin, freebsd, linux, and so on.
	// To view possible combinations of GOOS and GOARCH, run "go tool dist list".
	const GOOS string = sys.GOOS

	// GOARCH is the running program's architecture target:
	// one of 386, amd64, arm, s390x, and so on.
	const GOARCH string = sys.GOARCH