blob: 604d0db24a2492e3ba6c6f929aad59d66ff3681e [file] [log] [blame]
// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Garbage collector (GC).
//
// The GC runs concurrently with mutator threads, is type accurate (aka precise), allows multiple
// GC thread to run in parallel. It is a concurrent mark and sweep that uses a write barrier. It is
// non-generational and non-compacting. Allocation is done using size segregated per P allocation
// areas to minimize fragmentation while eliminating locks in the common case.
//
// The algorithm decomposes into several steps.
// This is a high level description of the algorithm being used. For an overview of GC a good
// place to start is Richard Jones' gchandbook.org.
//
// The algorithm's intellectual heritage includes Dijkstra's on-the-fly algorithm, see
// Edsger W. Dijkstra, Leslie Lamport, A. J. Martin, C. S. Scholten, and E. F. M. Steffens. 1978.
// On-the-fly garbage collection: an exercise in cooperation. Commun. ACM 21, 11 (November 1978),
// 966-975.
// For journal quality proofs that these steps are complete, correct, and terminate see
// Hudson, R., and Moss, J.E.B. Copying Garbage Collection without stopping the world.
// Concurrency and Computation: Practice and Experience 15(3-5), 2003.
//
// 1. GC performs sweep termination.
//
// a. Stop the world. This causes all Ps to reach a GC safe-point.
//
// b. Sweep any unswept spans. There will only be unswept spans if
// this GC cycle was forced before the expected time.
//
// 2. GC performs the mark phase.
//
// a. Prepare for the mark phase by setting gcphase to _GCmark
// (from _GCoff), enabling the write barrier, enabling mutator
// assists, and enqueueing root mark jobs. No objects may be
// scanned until all Ps have enabled the write barrier, which is
// accomplished using STW.
//
// b. Start the world. From this point, GC work is done by mark
// workers started by the scheduler and by assists performed as
// part of allocation. The write barrier shades both the
// overwritten pointer and the new pointer value for any pointer
// writes (see mbarrier.go for details). Newly allocated objects
// are immediately marked black.
//
// c. GC performs root marking jobs. This includes scanning all
// stacks, shading all globals, and shading any heap pointers in
// off-heap runtime data structures. Scanning a stack stops a
// goroutine, shades any pointers found on its stack, and then
// resumes the goroutine.
//
// d. GC drains the work queue of grey objects, scanning each grey
// object to black and shading all pointers found in the object
// (which in turn may add those pointers to the work queue).
//
// e. Because GC work is spread across local caches, GC uses a
// distributed termination algorithm to detect when there are no
// more root marking jobs or grey objects (see gcMarkDone). At this
// point, GC transitions to mark termination.
//
// 3. GC performs mark termination.
//
// a. Stop the world.
//
// b. Set gcphase to _GCmarktermination, and disable workers and
// assists.
//
// c. Perform housekeeping like flushing mcaches.
//
// 4. GC performs the sweep phase.
//
// a. Prepare for the sweep phase by setting gcphase to _GCoff,
// setting up sweep state and disabling the write barrier.
//
// b. Start the world. From this point on, newly allocated objects
// are white, and allocating sweeps spans before use if necessary.
//
// c. GC does concurrent sweeping in the background and in response
// to allocation. See description below.
//
// 5. When sufficient allocation has taken place, replay the sequence
// starting with 1 above. See discussion of GC rate below.
// Concurrent sweep.
//
// The sweep phase proceeds concurrently with normal program execution.
// The heap is swept span-by-span both lazily (when a goroutine needs another span)
// and concurrently in a background goroutine (this helps programs that are not CPU bound).
// At the end of STW mark termination all spans are marked as "needs sweeping".
//
// The background sweeper goroutine simply sweeps spans one-by-one.
//
// To avoid requesting more OS memory while there are unswept spans, when a
// goroutine needs another span, it first attempts to reclaim that much memory
// by sweeping. When a goroutine needs to allocate a new small-object span, it
// sweeps small-object spans for the same object size until it frees at least
// one object. When a goroutine needs to allocate large-object span from heap,
// it sweeps spans until it frees at least that many pages into heap. There is
// one case where this may not suffice: if a goroutine sweeps and frees two
// nonadjacent one-page spans to the heap, it will allocate a new two-page
// span, but there can still be other one-page unswept spans which could be
// combined into a two-page span.
//
// It's critical to ensure that no operations proceed on unswept spans (that would corrupt
// mark bits in GC bitmap). During GC all mcaches are flushed into the central cache,
// so they are empty. When a goroutine grabs a new span into mcache, it sweeps it.
// When a goroutine explicitly frees an object or sets a finalizer, it ensures that
// the span is swept (either by sweeping it, or by waiting for the concurrent sweep to finish).
// The finalizer goroutine is kicked off only when all spans are swept.
// When the next GC starts, it sweeps all not-yet-swept spans (if any).
// GC rate.
// Next GC is after we've allocated an extra amount of memory proportional to
// the amount already in use. The proportion is controlled by GOGC environment variable
// (100 by default). If GOGC=100 and we're using 4M, we'll GC again when we get to 8M
// (this mark is tracked in gcController.heapGoal variable). This keeps the GC cost in
// linear proportion to the allocation cost. Adjusting GOGC just changes the linear constant
// (and also the amount of extra memory used).
// Oblets
//
// In order to prevent long pauses while scanning large objects and to
// improve parallelism, the garbage collector breaks up scan jobs for
// objects larger than maxObletBytes into "oblets" of at most
// maxObletBytes. When scanning encounters the beginning of a large
// object, it scans only the first oblet and enqueues the remaining
// oblets as new scan jobs.
package runtime
import (
"internal/cpu"
"runtime/internal/atomic"
"unsafe"
)
const (
_DebugGC = 0
_ConcurrentSweep = true
_FinBlockSize = 4 * 1024
// debugScanConservative enables debug logging for stack
// frames that are scanned conservatively.
debugScanConservative = false
// sweepMinHeapDistance is a lower bound on the heap distance
// (in bytes) reserved for concurrent sweeping between GC
// cycles.
sweepMinHeapDistance = 1024 * 1024
)
func gcinit() {
if unsafe.Sizeof(workbuf{}) != _WorkbufSize {
throw("size of Workbuf is suboptimal")
}
// No sweep on the first cycle.
sweep.active.state.Store(sweepDrainedMask)
// Initialize GC pacer state.
// Use the environment variable GOGC for the initial gcPercent value.
gcController.init(readGOGC())
work.startSema = 1
work.markDoneSema = 1
lockInit(&work.sweepWaiters.lock, lockRankSweepWaiters)
lockInit(&work.assistQueue.lock, lockRankAssistQueue)
lockInit(&work.wbufSpans.lock, lockRankWbufSpans)
}
// gcenable is called after the bulk of the runtime initialization,
// just before we're about to start letting user code run.
// It kicks off the background sweeper goroutine, the background
// scavenger goroutine, and enables GC.
func gcenable() {
// Kick off sweeping and scavenging.
c := make(chan int, 2)
go bgsweep(c)
go bgscavenge(c)
<-c
<-c
memstats.enablegc = true // now that runtime is initialized, GC is okay
}
// Garbage collector phase.
// Indicates to write barrier and synchronization task to perform.
var gcphase uint32
// The compiler knows about this variable.
// If you change it, you must change builtin/runtime.go, too.
// If you change the first four bytes, you must also change the write
// barrier insertion code.
var writeBarrier struct {
enabled bool // compiler emits a check of this before calling write barrier
pad [3]byte // compiler uses 32-bit load for "enabled" field
needed bool // whether we need a write barrier for current GC phase
cgo bool // whether we need a write barrier for a cgo check
alignme uint64 // guarantee alignment so that compiler can use a 32 or 64-bit load
}
// gcBlackenEnabled is 1 if mutator assists and background mark
// workers are allowed to blacken objects. This must only be set when
// gcphase == _GCmark.
var gcBlackenEnabled uint32
const (
_GCoff = iota // GC not running; sweeping in background, write barrier disabled
_GCmark // GC marking roots and workbufs: allocate black, write barrier ENABLED
_GCmarktermination // GC mark termination: allocate black, P's help GC, write barrier ENABLED
)
//go:nosplit
func setGCPhase(x uint32) {
atomic.Store(&gcphase, x)
writeBarrier.needed = gcphase == _GCmark || gcphase == _GCmarktermination
writeBarrier.enabled = writeBarrier.needed || writeBarrier.cgo
}
// gcMarkWorkerMode represents the mode that a concurrent mark worker
// should operate in.
//
// Concurrent marking happens through four different mechanisms. One
// is mutator assists, which happen in response to allocations and are
// not scheduled. The other three are variations in the per-P mark
// workers and are distinguished by gcMarkWorkerMode.
type gcMarkWorkerMode int
const (
// gcMarkWorkerNotWorker indicates that the next scheduled G is not
// starting work and the mode should be ignored.
gcMarkWorkerNotWorker gcMarkWorkerMode = iota
// gcMarkWorkerDedicatedMode indicates that the P of a mark
// worker is dedicated to running that mark worker. The mark
// worker should run without preemption.
gcMarkWorkerDedicatedMode
// gcMarkWorkerFractionalMode indicates that a P is currently
// running the "fractional" mark worker. The fractional worker
// is necessary when GOMAXPROCS*gcBackgroundUtilization is not
// an integer and using only dedicated workers would result in
// utilization too far from the target of gcBackgroundUtilization.
// The fractional worker should run until it is preempted and
// will be scheduled to pick up the fractional part of
// GOMAXPROCS*gcBackgroundUtilization.
gcMarkWorkerFractionalMode
// gcMarkWorkerIdleMode indicates that a P is running the mark
// worker because it has nothing else to do. The idle worker
// should run until it is preempted and account its time
// against gcController.idleMarkTime.
gcMarkWorkerIdleMode
)
// gcMarkWorkerModeStrings are the strings labels of gcMarkWorkerModes
// to use in execution traces.
var gcMarkWorkerModeStrings = [...]string{
"Not worker",
"GC (dedicated)",
"GC (fractional)",
"GC (idle)",
}
// pollFractionalWorkerExit reports whether a fractional mark worker
// should self-preempt. It assumes it is called from the fractional
// worker.
func pollFractionalWorkerExit() bool {
// This should be kept in sync with the fractional worker
// scheduler logic in findRunnableGCWorker.
now := nanotime()
delta := now - gcController.markStartTime
if delta <= 0 {
return true
}
p := getg().m.p.ptr()
selfTime := p.gcFractionalMarkTime + (now - p.gcMarkWorkerStartTime)
// Add some slack to the utilization goal so that the
// fractional worker isn't behind again the instant it exits.
return float64(selfTime)/float64(delta) > 1.2*gcController.fractionalUtilizationGoal
}
var work struct {
full lfstack // lock-free list of full blocks workbuf
empty lfstack // lock-free list of empty blocks workbuf
pad0 cpu.CacheLinePad // prevents false-sharing between full/empty and nproc/nwait
wbufSpans struct {
lock mutex
// free is a list of spans dedicated to workbufs, but
// that don't currently contain any workbufs.
free mSpanList
// busy is a list of all spans containing workbufs on
// one of the workbuf lists.
busy mSpanList
}
// Restore 64-bit alignment on 32-bit.
_ uint32
// bytesMarked is the number of bytes marked this cycle. This
// includes bytes blackened in scanned objects, noscan objects
// that go straight to black, and permagrey objects scanned by
// markroot during the concurrent scan phase. This is updated
// atomically during the cycle. Updates may be batched
// arbitrarily, since the value is only read at the end of the
// cycle.
//
// Because of benign races during marking, this number may not
// be the exact number of marked bytes, but it should be very
// close.
//
// Put this field here because it needs 64-bit atomic access
// (and thus 8-byte alignment even on 32-bit architectures).
bytesMarked uint64
markrootNext uint32 // next markroot job
markrootJobs uint32 // number of markroot jobs
nproc uint32
tstart int64
nwait uint32
// Number of roots of various root types. Set by gcMarkRootPrepare.
//
// nStackRoots == len(stackRoots), but we have nStackRoots for
// consistency.
nDataRoots, nBSSRoots, nSpanRoots, nStackRoots int
// Base indexes of each root type. Set by gcMarkRootPrepare.
baseData, baseBSS, baseSpans, baseStacks, baseEnd uint32
// stackRoots is a snapshot of all of the Gs that existed
// before the beginning of concurrent marking. The backing
// store of this must not be modified because it might be
// shared with allgs.
stackRoots []*g
// Each type of GC state transition is protected by a lock.
// Since multiple threads can simultaneously detect the state
// transition condition, any thread that detects a transition
// condition must acquire the appropriate transition lock,
// re-check the transition condition and return if it no
// longer holds or perform the transition if it does.
// Likewise, any transition must invalidate the transition
// condition before releasing the lock. This ensures that each
// transition is performed by exactly one thread and threads
// that need the transition to happen block until it has
// happened.
//
// startSema protects the transition from "off" to mark or
// mark termination.
startSema uint32
// markDoneSema protects transitions from mark to mark termination.
markDoneSema uint32
bgMarkReady note // signal background mark worker has started
bgMarkDone uint32 // cas to 1 when at a background mark completion point
// Background mark completion signaling
// mode is the concurrency mode of the current GC cycle.
mode gcMode
// userForced indicates the current GC cycle was forced by an
// explicit user call.
userForced bool
// totaltime is the CPU nanoseconds spent in GC since the
// program started if debug.gctrace > 0.
totaltime int64
// initialHeapLive is the value of gcController.heapLive at the
// beginning of this GC cycle.
initialHeapLive uint64
// assistQueue is a queue of assists that are blocked because
// there was neither enough credit to steal or enough work to
// do.
assistQueue struct {
lock mutex
q gQueue
}
// sweepWaiters is a list of blocked goroutines to wake when
// we transition from mark termination to sweep.
sweepWaiters struct {
lock mutex
list gList
}
// cycles is the number of completed GC cycles, where a GC
// cycle is sweep termination, mark, mark termination, and
// sweep. This differs from memstats.numgc, which is
// incremented at mark termination.
cycles uint32
// Timing/utilization stats for this cycle.
stwprocs, maxprocs int32
tSweepTerm, tMark, tMarkTerm, tEnd int64 // nanotime() of phase start
pauseNS int64 // total STW time this cycle
pauseStart int64 // nanotime() of last STW
// debug.gctrace heap sizes for this cycle.
heap0, heap1, heap2, heapGoal uint64
}
// GC runs a garbage collection and blocks the caller until the
// garbage collection is complete. It may also block the entire
// program.
func GC() {
// We consider a cycle to be: sweep termination, mark, mark
// termination, and sweep. This function shouldn't return
// until a full cycle has been completed, from beginning to
// end. Hence, we always want to finish up the current cycle
// and start a new one. That means:
//
// 1. In sweep termination, mark, or mark termination of cycle
// N, wait until mark termination N completes and transitions
// to sweep N.
//
// 2. In sweep N, help with sweep N.
//
// At this point we can begin a full cycle N+1.
//
// 3. Trigger cycle N+1 by starting sweep termination N+1.
//
// 4. Wait for mark termination N+1 to complete.
//
// 5. Help with sweep N+1 until it's done.
//
// This all has to be written to deal with the fact that the
// GC may move ahead on its own. For example, when we block
// until mark termination N, we may wake up in cycle N+2.
// Wait until the current sweep termination, mark, and mark
// termination complete.
n := atomic.Load(&work.cycles)
gcWaitOnMark(n)
// We're now in sweep N or later. Trigger GC cycle N+1, which
// will first finish sweep N if necessary and then enter sweep
// termination N+1.
gcStart(gcTrigger{kind: gcTriggerCycle, n: n + 1})
// Wait for mark termination N+1 to complete.
gcWaitOnMark(n + 1)
// Finish sweep N+1 before returning. We do this both to
// complete the cycle and because runtime.GC() is often used
// as part of tests and benchmarks to get the system into a
// relatively stable and isolated state.
for atomic.Load(&work.cycles) == n+1 && sweepone() != ^uintptr(0) {
sweep.nbgsweep++
Gosched()
}
// Callers may assume that the heap profile reflects the
// just-completed cycle when this returns (historically this
// happened because this was a STW GC), but right now the
// profile still reflects mark termination N, not N+1.
//
// As soon as all of the sweep frees from cycle N+1 are done,
// we can go ahead and publish the heap profile.
//
// First, wait for sweeping to finish. (We know there are no
// more spans on the sweep queue, but we may be concurrently
// sweeping spans, so we have to wait.)
for atomic.Load(&work.cycles) == n+1 && !isSweepDone() {
Gosched()
}
// Now we're really done with sweeping, so we can publish the
// stable heap profile. Only do this if we haven't already hit
// another mark termination.
mp := acquirem()
cycle := atomic.Load(&work.cycles)
if cycle == n+1 || (gcphase == _GCmark && cycle == n+2) {
mProf_PostSweep()
}
releasem(mp)
}
// gcWaitOnMark blocks until GC finishes the Nth mark phase. If GC has
// already completed this mark phase, it returns immediately.
func gcWaitOnMark(n uint32) {
for {
// Disable phase transitions.
lock(&work.sweepWaiters.lock)
nMarks := atomic.Load(&work.cycles)
if gcphase != _GCmark {
// We've already completed this cycle's mark.
nMarks++
}
if nMarks > n {
// We're done.
unlock(&work.sweepWaiters.lock)
return
}
// Wait until sweep termination, mark, and mark
// termination of cycle N complete.
work.sweepWaiters.list.push(getg())
goparkunlock(&work.sweepWaiters.lock, waitReasonWaitForGCCycle, traceEvGoBlock, 1)
}
}
// gcMode indicates how concurrent a GC cycle should be.
type gcMode int
const (
gcBackgroundMode gcMode = iota // concurrent GC and sweep
gcForceMode // stop-the-world GC now, concurrent sweep
gcForceBlockMode // stop-the-world GC now and STW sweep (forced by user)
)
// A gcTrigger is a predicate for starting a GC cycle. Specifically,
// it is an exit condition for the _GCoff phase.
type gcTrigger struct {
kind gcTriggerKind
now int64 // gcTriggerTime: current time
n uint32 // gcTriggerCycle: cycle number to start
}
type gcTriggerKind int
const (
// gcTriggerHeap indicates that a cycle should be started when
// the heap size reaches the trigger heap size computed by the
// controller.
gcTriggerHeap gcTriggerKind = iota
// gcTriggerTime indicates that a cycle should be started when
// it's been more than forcegcperiod nanoseconds since the
// previous GC cycle.
gcTriggerTime
// gcTriggerCycle indicates that a cycle should be started if
// we have not yet started cycle number gcTrigger.n (relative
// to work.cycles).
gcTriggerCycle
)
// test reports whether the trigger condition is satisfied, meaning
// that the exit condition for the _GCoff phase has been met. The exit
// condition should be tested when allocating.
func (t gcTrigger) test() bool {
if !memstats.enablegc || panicking != 0 || gcphase != _GCoff {
return false
}
switch t.kind {
case gcTriggerHeap:
// Non-atomic access to gcController.heapLive for performance. If
// we are going to trigger on this, this thread just
// atomically wrote gcController.heapLive anyway and we'll see our
// own write.
return gcController.heapLive >= gcController.trigger
case gcTriggerTime:
if gcController.gcPercent.Load() < 0 {
return false
}
lastgc := int64(atomic.Load64(&memstats.last_gc_nanotime))
return lastgc != 0 && t.now-lastgc > forcegcperiod
case gcTriggerCycle:
// t.n > work.cycles, but accounting for wraparound.
return int32(t.n-work.cycles) > 0
}
return true
}
// gcStart starts the GC. It transitions from _GCoff to _GCmark (if
// debug.gcstoptheworld == 0) or performs all of GC (if
// debug.gcstoptheworld != 0).
//
// This may return without performing this transition in some cases,
// such as when called on a system stack or with locks held.
func gcStart(trigger gcTrigger) {
// Since this is called from malloc and malloc is called in
// the guts of a number of libraries that might be holding
// locks, don't attempt to start GC in non-preemptible or
// potentially unstable situations.
mp := acquirem()
if gp := getg(); gp == mp.g0 || mp.locks > 1 || mp.preemptoff != "" {
releasem(mp)
return
}
releasem(mp)
mp = nil
// Pick up the remaining unswept/not being swept spans concurrently
//
// This shouldn't happen if we're being invoked in background
// mode since proportional sweep should have just finished
// sweeping everything, but rounding errors, etc, may leave a
// few spans unswept. In forced mode, this is necessary since
// GC can be forced at any point in the sweeping cycle.
//
// We check the transition condition continuously here in case
// this G gets delayed in to the next GC cycle.
for trigger.test() && sweepone() != ^uintptr(0) {
sweep.nbgsweep++
}
// Perform GC initialization and the sweep termination
// transition.
semacquire(&work.startSema)
// Re-check transition condition under transition lock.
if !trigger.test() {
semrelease(&work.startSema)
return
}
// For stats, check if this GC was forced by the user.
work.userForced = trigger.kind == gcTriggerCycle
// In gcstoptheworld debug mode, upgrade the mode accordingly.
// We do this after re-checking the transition condition so
// that multiple goroutines that detect the heap trigger don't
// start multiple STW GCs.
mode := gcBackgroundMode
if debug.gcstoptheworld == 1 {
mode = gcForceMode
} else if debug.gcstoptheworld == 2 {
mode = gcForceBlockMode
}
// Ok, we're doing it! Stop everybody else
semacquire(&gcsema)
semacquire(&worldsema)
if trace.enabled {
traceGCStart()
}
// Check that all Ps have finished deferred mcache flushes.
for _, p := range allp {
if fg := atomic.Load(&p.mcache.flushGen); fg != mheap_.sweepgen {
println("runtime: p", p.id, "flushGen", fg, "!= sweepgen", mheap_.sweepgen)
throw("p mcache not flushed")
}
}
gcBgMarkStartWorkers()
systemstack(gcResetMarkState)
work.stwprocs, work.maxprocs = gomaxprocs, gomaxprocs
if work.stwprocs > ncpu {
// This is used to compute CPU time of the STW phases,
// so it can't be more than ncpu, even if GOMAXPROCS is.
work.stwprocs = ncpu
}
work.heap0 = atomic.Load64(&gcController.heapLive)
work.pauseNS = 0
work.mode = mode
now := nanotime()
work.tSweepTerm = now
work.pauseStart = now
if trace.enabled {
traceGCSTWStart(1)
}
systemstack(stopTheWorldWithSema)
// Finish sweep before we start concurrent scan.
systemstack(func() {
finishsweep_m()
})
// clearpools before we start the GC. If we wait they memory will not be
// reclaimed until the next GC cycle.
clearpools()
work.cycles++
// Assists and workers can start the moment we start
// the world.
gcController.startCycle(now, int(gomaxprocs), trigger)
work.heapGoal = gcController.heapGoal
// In STW mode, disable scheduling of user Gs. This may also
// disable scheduling of this goroutine, so it may block as
// soon as we start the world again.
if mode != gcBackgroundMode {
schedEnableUser(false)
}
// Enter concurrent mark phase and enable
// write barriers.
//
// Because the world is stopped, all Ps will
// observe that write barriers are enabled by
// the time we start the world and begin
// scanning.
//
// Write barriers must be enabled before assists are
// enabled because they must be enabled before
// any non-leaf heap objects are marked. Since
// allocations are blocked until assists can
// happen, we want enable assists as early as
// possible.
setGCPhase(_GCmark)
gcBgMarkPrepare() // Must happen before assist enable.
gcMarkRootPrepare()
// Mark all active tinyalloc blocks. Since we're
// allocating from these, they need to be black like
// other allocations. The alternative is to blacken
// the tiny block on every allocation from it, which
// would slow down the tiny allocator.
gcMarkTinyAllocs()
// At this point all Ps have enabled the write
// barrier, thus maintaining the no white to
// black invariant. Enable mutator assists to
// put back-pressure on fast allocating
// mutators.
atomic.Store(&gcBlackenEnabled, 1)
// In STW mode, we could block the instant systemstack
// returns, so make sure we're not preemptible.
mp = acquirem()
// Concurrent mark.
systemstack(func() {
now = startTheWorldWithSema(trace.enabled)
work.pauseNS += now - work.pauseStart
work.tMark = now
memstats.gcPauseDist.record(now - work.pauseStart)
})
// Release the world sema before Gosched() in STW mode
// because we will need to reacquire it later but before
// this goroutine becomes runnable again, and we could
// self-deadlock otherwise.
semrelease(&worldsema)
releasem(mp)
// Make sure we block instead of returning to user code
// in STW mode.
if mode != gcBackgroundMode {
Gosched()
}
semrelease(&work.startSema)
}
// gcMarkDoneFlushed counts the number of P's with flushed work.
//
// Ideally this would be a captured local in gcMarkDone, but forEachP
// escapes its callback closure, so it can't capture anything.
//
// This is protected by markDoneSema.
var gcMarkDoneFlushed uint32
// gcMarkDone transitions the GC from mark to mark termination if all
// reachable objects have been marked (that is, there are no grey
// objects and can be no more in the future). Otherwise, it flushes
// all local work to the global queues where it can be discovered by
// other workers.
//
// This should be called when all local mark work has been drained and
// there are no remaining workers. Specifically, when
//
// work.nwait == work.nproc && !gcMarkWorkAvailable(p)
//
// The calling context must be preemptible.
//
// Flushing local work is important because idle Ps may have local
// work queued. This is the only way to make that work visible and
// drive GC to completion.
//
// It is explicitly okay to have write barriers in this function. If
// it does transition to mark termination, then all reachable objects
// have been marked, so the write barrier cannot shade any more
// objects.
func gcMarkDone() {
// Ensure only one thread is running the ragged barrier at a
// time.
semacquire(&work.markDoneSema)
top:
// Re-check transition condition under transition lock.
//
// It's critical that this checks the global work queues are
// empty before performing the ragged barrier. Otherwise,
// there could be global work that a P could take after the P
// has passed the ragged barrier.
if !(gcphase == _GCmark && work.nwait == work.nproc && !gcMarkWorkAvailable(nil)) {
semrelease(&work.markDoneSema)
return
}
// forEachP needs worldsema to execute, and we'll need it to
// stop the world later, so acquire worldsema now.
semacquire(&worldsema)
// Flush all local buffers and collect flushedWork flags.
gcMarkDoneFlushed = 0
systemstack(func() {
gp := getg().m.curg
// Mark the user stack as preemptible so that it may be scanned.
// Otherwise, our attempt to force all P's to a safepoint could
// result in a deadlock as we attempt to preempt a worker that's
// trying to preempt us (e.g. for a stack scan).
casgstatus(gp, _Grunning, _Gwaiting)
forEachP(func(_p_ *p) {
// Flush the write barrier buffer, since this may add
// work to the gcWork.
wbBufFlush1(_p_)
// Flush the gcWork, since this may create global work
// and set the flushedWork flag.
//
// TODO(austin): Break up these workbufs to
// better distribute work.
_p_.gcw.dispose()
// Collect the flushedWork flag.
if _p_.gcw.flushedWork {
atomic.Xadd(&gcMarkDoneFlushed, 1)
_p_.gcw.flushedWork = false
}
})
casgstatus(gp, _Gwaiting, _Grunning)
})
if gcMarkDoneFlushed != 0 {
// More grey objects were discovered since the
// previous termination check, so there may be more
// work to do. Keep going. It's possible the
// transition condition became true again during the
// ragged barrier, so re-check it.
semrelease(&worldsema)
goto top
}
// There was no global work, no local work, and no Ps
// communicated work since we took markDoneSema. Therefore
// there are no grey objects and no more objects can be
// shaded. Transition to mark termination.
now := nanotime()
work.tMarkTerm = now
work.pauseStart = now
getg().m.preemptoff = "gcing"
if trace.enabled {
traceGCSTWStart(0)
}
systemstack(stopTheWorldWithSema)
// The gcphase is _GCmark, it will transition to _GCmarktermination
// below. The important thing is that the wb remains active until
// all marking is complete. This includes writes made by the GC.
// There is sometimes work left over when we enter mark termination due
// to write barriers performed after the completion barrier above.
// Detect this and resume concurrent mark. This is obviously
// unfortunate.
//
// See issue #27993 for details.
//
// Switch to the system stack to call wbBufFlush1, though in this case
// it doesn't matter because we're non-preemptible anyway.
restart := false
systemstack(func() {
for _, p := range allp {
wbBufFlush1(p)
if !p.gcw.empty() {
restart = true
break
}
}
})
if restart {
getg().m.preemptoff = ""
systemstack(func() {
now := startTheWorldWithSema(true)
work.pauseNS += now - work.pauseStart
memstats.gcPauseDist.record(now - work.pauseStart)
})
semrelease(&worldsema)
goto top
}
// Disable assists and background workers. We must do
// this before waking blocked assists.
atomic.Store(&gcBlackenEnabled, 0)
// Wake all blocked assists. These will run when we
// start the world again.
gcWakeAllAssists()
// Likewise, release the transition lock. Blocked
// workers and assists will run when we start the
// world again.
semrelease(&work.markDoneSema)
// In STW mode, re-enable user goroutines. These will be
// queued to run after we start the world.
schedEnableUser(true)
// endCycle depends on all gcWork cache stats being flushed.
// The termination algorithm above ensured that up to
// allocations since the ragged barrier.
gcController.endCycle(now, int(gomaxprocs), work.userForced)
// Perform mark termination. This will restart the world.
gcMarkTermination()
}
// World must be stopped and mark assists and background workers must be
// disabled.
func gcMarkTermination() {
// Start marktermination (write barrier remains enabled for now).
setGCPhase(_GCmarktermination)
work.heap1 = gcController.heapLive
startTime := nanotime()
mp := acquirem()
mp.preemptoff = "gcing"
_g_ := getg()
_g_.m.traceback = 2
gp := _g_.m.curg
casgstatus(gp, _Grunning, _Gwaiting)
gp.waitreason = waitReasonGarbageCollection
// Run gc on the g0 stack. We do this so that the g stack
// we're currently running on will no longer change. Cuts
// the root set down a bit (g0 stacks are not scanned, and
// we don't need to scan gc's internal state). We also
// need to switch to g0 so we can shrink the stack.
systemstack(func() {
gcMark(startTime)
// Must return immediately.
// The outer function's stack may have moved
// during gcMark (it shrinks stacks, including the
// outer function's stack), so we must not refer
// to any of its variables. Return back to the
// non-system stack to pick up the new addresses
// before continuing.
})
systemstack(func() {
work.heap2 = work.bytesMarked
if debug.gccheckmark > 0 {
// Run a full non-parallel, stop-the-world
// mark using checkmark bits, to check that we
// didn't forget to mark anything during the
// concurrent mark process.
startCheckmarks()
gcResetMarkState()
gcw := &getg().m.p.ptr().gcw
gcDrain(gcw, 0)
wbBufFlush1(getg().m.p.ptr())
gcw.dispose()
endCheckmarks()
}
// marking is complete so we can turn the write barrier off
setGCPhase(_GCoff)
gcSweep(work.mode)
})
_g_.m.traceback = 0
casgstatus(gp, _Gwaiting, _Grunning)
if trace.enabled {
traceGCDone()
}
// all done
mp.preemptoff = ""
if gcphase != _GCoff {
throw("gc done but gcphase != _GCoff")
}
// Record heap_inuse for scavenger.
memstats.last_heap_inuse = memstats.heap_inuse
// Update GC trigger and pacing for the next cycle.
gcController.commit()
gcPaceSweeper(gcController.trigger)
gcPaceScavenger(gcController.heapGoal, gcController.lastHeapGoal)
// Update timing memstats
now := nanotime()
sec, nsec, _ := time_now()
unixNow := sec*1e9 + int64(nsec)
work.pauseNS += now - work.pauseStart
work.tEnd = now
memstats.gcPauseDist.record(now - work.pauseStart)
atomic.Store64(&memstats.last_gc_unix, uint64(unixNow)) // must be Unix time to make sense to user
atomic.Store64(&memstats.last_gc_nanotime, uint64(now)) // monotonic time for us
memstats.pause_ns[memstats.numgc%uint32(len(memstats.pause_ns))] = uint64(work.pauseNS)
memstats.pause_end[memstats.numgc%uint32(len(memstats.pause_end))] = uint64(unixNow)
memstats.pause_total_ns += uint64(work.pauseNS)
// Update work.totaltime.
sweepTermCpu := int64(work.stwprocs) * (work.tMark - work.tSweepTerm)
// We report idle marking time below, but omit it from the
// overall utilization here since it's "free".
markCpu := gcController.assistTime + gcController.dedicatedMarkTime + gcController.fractionalMarkTime
markTermCpu := int64(work.stwprocs) * (work.tEnd - work.tMarkTerm)
cycleCpu := sweepTermCpu + markCpu + markTermCpu
work.totaltime += cycleCpu
// Compute overall GC CPU utilization.
totalCpu := sched.totaltime + (now-sched.procresizetime)*int64(gomaxprocs)
memstats.gc_cpu_fraction = float64(work.totaltime) / float64(totalCpu)
// Reset sweep state.
sweep.nbgsweep = 0
sweep.npausesweep = 0
if work.userForced {
memstats.numforcedgc++
}
// Bump GC cycle count and wake goroutines waiting on sweep.
lock(&work.sweepWaiters.lock)
memstats.numgc++
injectglist(&work.sweepWaiters.list)
unlock(&work.sweepWaiters.lock)
// Finish the current heap profiling cycle and start a new
// heap profiling cycle. We do this before starting the world
// so events don't leak into the wrong cycle.
mProf_NextCycle()
// There may be stale spans in mcaches that need to be swept.
// Those aren't tracked in any sweep lists, so we need to
// count them against sweep completion until we ensure all
// those spans have been forced out.
sl := sweep.active.begin()
if !sl.valid {
throw("failed to set sweep barrier")
}
systemstack(func() { startTheWorldWithSema(true) })
// Flush the heap profile so we can start a new cycle next GC.
// This is relatively expensive, so we don't do it with the
// world stopped.
mProf_Flush()
// Prepare workbufs for freeing by the sweeper. We do this
// asynchronously because it can take non-trivial time.
prepareFreeWorkbufs()
// Free stack spans. This must be done between GC cycles.
systemstack(freeStackSpans)
// Ensure all mcaches are flushed. Each P will flush its own
// mcache before allocating, but idle Ps may not. Since this
// is necessary to sweep all spans, we need to ensure all
// mcaches are flushed before we start the next GC cycle.
systemstack(func() {
forEachP(func(_p_ *p) {
_p_.mcache.prepareForSweep()
})
})
// Now that we've swept stale spans in mcaches, they don't
// count against unswept spans.
sweep.active.end(sl)
// Print gctrace before dropping worldsema. As soon as we drop
// worldsema another cycle could start and smash the stats
// we're trying to print.
if debug.gctrace > 0 {
util := int(memstats.gc_cpu_fraction * 100)
var sbuf [24]byte
printlock()
print("gc ", memstats.numgc,
" @", string(itoaDiv(sbuf[:], uint64(work.tSweepTerm-runtimeInitTime)/1e6, 3)), "s ",
util, "%: ")
prev := work.tSweepTerm
for i, ns := range []int64{work.tMark, work.tMarkTerm, work.tEnd} {
if i != 0 {
print("+")
}
print(string(fmtNSAsMS(sbuf[:], uint64(ns-prev))))
prev = ns
}
print(" ms clock, ")
for i, ns := range []int64{sweepTermCpu, gcController.assistTime, gcController.dedicatedMarkTime + gcController.fractionalMarkTime, gcController.idleMarkTime, markTermCpu} {
if i == 2 || i == 3 {
// Separate mark time components with /.
print("/")
} else if i != 0 {
print("+")
}
print(string(fmtNSAsMS(sbuf[:], uint64(ns))))
}
print(" ms cpu, ",
work.heap0>>20, "->", work.heap1>>20, "->", work.heap2>>20, " MB, ",
work.heapGoal>>20, " MB goal, ",
gcController.stackScan>>20, " MB stacks, ",
gcController.globalsScan>>20, " MB globals, ",
work.maxprocs, " P")
if work.userForced {
print(" (forced)")
}
print("\n")
printunlock()
}
semrelease(&worldsema)
semrelease(&gcsema)
// Careful: another GC cycle may start now.
releasem(mp)
mp = nil
// now that gc is done, kick off finalizer thread if needed
if !concurrentSweep {
// give the queued finalizers, if any, a chance to run
Gosched()
}
}
// gcBgMarkStartWorkers prepares background mark worker goroutines. These
// goroutines will not run until the mark phase, but they must be started while
// the work is not stopped and from a regular G stack. The caller must hold
// worldsema.
func gcBgMarkStartWorkers() {
// Background marking is performed by per-P G's. Ensure that each P has
// a background GC G.
//
// Worker Gs don't exit if gomaxprocs is reduced. If it is raised
// again, we can reuse the old workers; no need to create new workers.
for gcBgMarkWorkerCount < gomaxprocs {
go gcBgMarkWorker()
notetsleepg(&work.bgMarkReady, -1)
noteclear(&work.bgMarkReady)
// The worker is now guaranteed to be added to the pool before
// its P's next findRunnableGCWorker.
gcBgMarkWorkerCount++
}
}
// gcBgMarkPrepare sets up state for background marking.
// Mutator assists must not yet be enabled.
func gcBgMarkPrepare() {
// Background marking will stop when the work queues are empty
// and there are no more workers (note that, since this is
// concurrent, this may be a transient state, but mark
// termination will clean it up). Between background workers
// and assists, we don't really know how many workers there
// will be, so we pretend to have an arbitrarily large number
// of workers, almost all of which are "waiting". While a
// worker is working it decrements nwait. If nproc == nwait,
// there are no workers.
work.nproc = ^uint32(0)
work.nwait = ^uint32(0)
}
// gcBgMarkWorker is an entry in the gcBgMarkWorkerPool. It points to a single
// gcBgMarkWorker goroutine.
type gcBgMarkWorkerNode struct {
// Unused workers are managed in a lock-free stack. This field must be first.
node lfnode
// The g of this worker.
gp guintptr
// Release this m on park. This is used to communicate with the unlock
// function, which cannot access the G's stack. It is unused outside of
// gcBgMarkWorker().
m muintptr
}
func gcBgMarkWorker() {
gp := getg()
// We pass node to a gopark unlock function, so it can't be on
// the stack (see gopark). Prevent deadlock from recursively
// starting GC by disabling preemption.
gp.m.preemptoff = "GC worker init"
node := new(gcBgMarkWorkerNode)
gp.m.preemptoff = ""
node.gp.set(gp)
node.m.set(acquirem())
notewakeup(&work.bgMarkReady)
// After this point, the background mark worker is generally scheduled
// cooperatively by gcController.findRunnableGCWorker. While performing
// work on the P, preemption is disabled because we are working on
// P-local work buffers. When the preempt flag is set, this puts itself
// into _Gwaiting to be woken up by gcController.findRunnableGCWorker
// at the appropriate time.
//
// When preemption is enabled (e.g., while in gcMarkDone), this worker
// may be preempted and schedule as a _Grunnable G from a runq. That is
// fine; it will eventually gopark again for further scheduling via
// findRunnableGCWorker.
//
// Since we disable preemption before notifying bgMarkReady, we
// guarantee that this G will be in the worker pool for the next
// findRunnableGCWorker. This isn't strictly necessary, but it reduces
// latency between _GCmark starting and the workers starting.
for {
// Go to sleep until woken by
// gcController.findRunnableGCWorker.
gopark(func(g *g, nodep unsafe.Pointer) bool {
node := (*gcBgMarkWorkerNode)(nodep)
if mp := node.m.ptr(); mp != nil {
// The worker G is no longer running; release
// the M.
//
// N.B. it is _safe_ to release the M as soon
// as we are no longer performing P-local mark
// work.
//
// However, since we cooperatively stop work
// when gp.preempt is set, if we releasem in
// the loop then the following call to gopark
// would immediately preempt the G. This is
// also safe, but inefficient: the G must
// schedule again only to enter gopark and park
// again. Thus, we defer the release until
// after parking the G.
releasem(mp)
}
// Release this G to the pool.
gcBgMarkWorkerPool.push(&node.node)
// Note that at this point, the G may immediately be
// rescheduled and may be running.
return true
}, unsafe.Pointer(node), waitReasonGCWorkerIdle, traceEvGoBlock, 0)
// Preemption must not occur here, or another G might see
// p.gcMarkWorkerMode.
// Disable preemption so we can use the gcw. If the
// scheduler wants to preempt us, we'll stop draining,
// dispose the gcw, and then preempt.
node.m.set(acquirem())
pp := gp.m.p.ptr() // P can't change with preemption disabled.
if gcBlackenEnabled == 0 {
println("worker mode", pp.gcMarkWorkerMode)
throw("gcBgMarkWorker: blackening not enabled")
}
if pp.gcMarkWorkerMode == gcMarkWorkerNotWorker {
throw("gcBgMarkWorker: mode not set")
}
startTime := nanotime()
pp.gcMarkWorkerStartTime = startTime
decnwait := atomic.Xadd(&work.nwait, -1)
if decnwait == work.nproc {
println("runtime: work.nwait=", decnwait, "work.nproc=", work.nproc)
throw("work.nwait was > work.nproc")
}
systemstack(func() {
// Mark our goroutine preemptible so its stack
// can be scanned. This lets two mark workers
// scan each other (otherwise, they would
// deadlock). We must not modify anything on
// the G stack. However, stack shrinking is
// disabled for mark workers, so it is safe to
// read from the G stack.
casgstatus(gp, _Grunning, _Gwaiting)
switch pp.gcMarkWorkerMode {
default:
throw("gcBgMarkWorker: unexpected gcMarkWorkerMode")
case gcMarkWorkerDedicatedMode:
gcDrain(&pp.gcw, gcDrainUntilPreempt|gcDrainFlushBgCredit)
if gp.preempt {
// We were preempted. This is
// a useful signal to kick
// everything out of the run
// queue so it can run
// somewhere else.
if drainQ, n := runqdrain(pp); n > 0 {
lock(&sched.lock)
globrunqputbatch(&drainQ, int32(n))
unlock(&sched.lock)
}
}
// Go back to draining, this time
// without preemption.
gcDrain(&pp.gcw, gcDrainFlushBgCredit)
case gcMarkWorkerFractionalMode:
gcDrain(&pp.gcw, gcDrainFractional|gcDrainUntilPreempt|gcDrainFlushBgCredit)
case gcMarkWorkerIdleMode:
gcDrain(&pp.gcw, gcDrainIdle|gcDrainUntilPreempt|gcDrainFlushBgCredit)
}
casgstatus(gp, _Gwaiting, _Grunning)
})
// Account for time and mark us as stopped.
duration := nanotime() - startTime
gcController.markWorkerStop(pp.gcMarkWorkerMode, duration)
if pp.gcMarkWorkerMode == gcMarkWorkerFractionalMode {
atomic.Xaddint64(&pp.gcFractionalMarkTime, duration)
}
// Was this the last worker and did we run out
// of work?
incnwait := atomic.Xadd(&work.nwait, +1)
if incnwait > work.nproc {
println("runtime: p.gcMarkWorkerMode=", pp.gcMarkWorkerMode,
"work.nwait=", incnwait, "work.nproc=", work.nproc)
throw("work.nwait > work.nproc")
}
// We'll releasem after this point and thus this P may run
// something else. We must clear the worker mode to avoid
// attributing the mode to a different (non-worker) G in
// traceGoStart.
pp.gcMarkWorkerMode = gcMarkWorkerNotWorker
// If this worker reached a background mark completion
// point, signal the main GC goroutine.
if incnwait == work.nproc && !gcMarkWorkAvailable(nil) {
// We don't need the P-local buffers here, allow
// preemption because we may schedule like a regular
// goroutine in gcMarkDone (block on locks, etc).
releasem(node.m.ptr())
node.m.set(nil)
gcMarkDone()
}
}
}
// gcMarkWorkAvailable reports whether executing a mark worker
// on p is potentially useful. p may be nil, in which case it only
// checks the global sources of work.
func gcMarkWorkAvailable(p *p) bool {
if p != nil && !p.gcw.empty() {
return true
}
if !work.full.empty() {
return true // global work available
}
if work.markrootNext < work.markrootJobs {
return true // root scan work available
}
return false
}
// gcMark runs the mark (or, for concurrent GC, mark termination)
// All gcWork caches must be empty.
// STW is in effect at this point.
func gcMark(startTime int64) {
if debug.allocfreetrace > 0 {
tracegc()
}
if gcphase != _GCmarktermination {
throw("in gcMark expecting to see gcphase as _GCmarktermination")
}
work.tstart = startTime
// Check that there's no marking work remaining.
if work.full != 0 || work.markrootNext < work.markrootJobs {
print("runtime: full=", hex(work.full), " next=", work.markrootNext, " jobs=", work.markrootJobs, " nDataRoots=", work.nDataRoots, " nBSSRoots=", work.nBSSRoots, " nSpanRoots=", work.nSpanRoots, " nStackRoots=", work.nStackRoots, "\n")
panic("non-empty mark queue after concurrent mark")
}
if debug.gccheckmark > 0 {
// This is expensive when there's a large number of
// Gs, so only do it if checkmark is also enabled.
gcMarkRootCheck()
}
if work.full != 0 {
throw("work.full != 0")
}
// Drop allg snapshot. allgs may have grown, in which case
// this is the only reference to the old backing store and
// there's no need to keep it around.
work.stackRoots = nil
// Clear out buffers and double-check that all gcWork caches
// are empty. This should be ensured by gcMarkDone before we
// enter mark termination.
//
// TODO: We could clear out buffers just before mark if this
// has a non-negligible impact on STW time.
for _, p := range allp {
// The write barrier may have buffered pointers since
// the gcMarkDone barrier. However, since the barrier
// ensured all reachable objects were marked, all of
// these must be pointers to black objects. Hence we
// can just discard the write barrier buffer.
if debug.gccheckmark > 0 {
// For debugging, flush the buffer and make
// sure it really was all marked.
wbBufFlush1(p)
} else {
p.wbBuf.reset()
}
gcw := &p.gcw
if !gcw.empty() {
printlock()
print("runtime: P ", p.id, " flushedWork ", gcw.flushedWork)
if gcw.wbuf1 == nil {
print(" wbuf1=<nil>")
} else {
print(" wbuf1.n=", gcw.wbuf1.nobj)
}
if gcw.wbuf2 == nil {
print(" wbuf2=<nil>")
} else {
print(" wbuf2.n=", gcw.wbuf2.nobj)
}
print("\n")
throw("P has cached GC work at end of mark termination")
}
// There may still be cached empty buffers, which we
// need to flush since we're going to free them. Also,
// there may be non-zero stats because we allocated
// black after the gcMarkDone barrier.
gcw.dispose()
}
// Flush scanAlloc from each mcache since we're about to modify
// heapScan directly. If we were to flush this later, then scanAlloc
// might have incorrect information.
//
// Note that it's not important to retain this information; we know
// exactly what heapScan is at this point via scanWork.
for _, p := range allp {
c := p.mcache
if c == nil {
continue
}
c.scanAlloc = 0
}
// Reset controller state.
gcController.resetLive(work.bytesMarked)
}
// gcSweep must be called on the system stack because it acquires the heap
// lock. See mheap for details.
//
// The world must be stopped.
//
//go:systemstack
func gcSweep(mode gcMode) {
assertWorldStopped()
if gcphase != _GCoff {
throw("gcSweep being done but phase is not GCoff")
}
lock(&mheap_.lock)
mheap_.sweepgen += 2
sweep.active.reset()
mheap_.pagesSwept.Store(0)
mheap_.sweepArenas = mheap_.allArenas
mheap_.reclaimIndex.Store(0)
mheap_.reclaimCredit.Store(0)
unlock(&mheap_.lock)
sweep.centralIndex.clear()
if !_ConcurrentSweep || mode == gcForceBlockMode {
// Special case synchronous sweep.
// Record that no proportional sweeping has to happen.
lock(&mheap_.lock)
mheap_.sweepPagesPerByte = 0
unlock(&mheap_.lock)
// Sweep all spans eagerly.
for sweepone() != ^uintptr(0) {
sweep.npausesweep++
}
// Free workbufs eagerly.
prepareFreeWorkbufs()
for freeSomeWbufs(false) {
}
// All "free" events for this mark/sweep cycle have
// now happened, so we can make this profile cycle
// available immediately.
mProf_NextCycle()
mProf_Flush()
return
}
// Background sweep.
lock(&sweep.lock)
if sweep.parked {
sweep.parked = false
ready(sweep.g, 0, true)
}
unlock(&sweep.lock)
}
// gcResetMarkState resets global state prior to marking (concurrent
// or STW) and resets the stack scan state of all Gs.
//
// This is safe to do without the world stopped because any Gs created
// during or after this will start out in the reset state.
//
// gcResetMarkState must be called on the system stack because it acquires
// the heap lock. See mheap for details.
//
//go:systemstack
func gcResetMarkState() {
// This may be called during a concurrent phase, so lock to make sure
// allgs doesn't change.
forEachG(func(gp *g) {
gp.gcscandone = false // set to true in gcphasework
gp.gcAssistBytes = 0
})
// Clear page marks. This is just 1MB per 64GB of heap, so the
// time here is pretty trivial.
lock(&mheap_.lock)
arenas := mheap_.allArenas
unlock(&mheap_.lock)
for _, ai := range arenas {
ha := mheap_.arenas[ai.l1()][ai.l2()]
for i := range ha.pageMarks {
ha.pageMarks[i] = 0
}
}
work.bytesMarked = 0
work.initialHeapLive = atomic.Load64(&gcController.heapLive)
}
// Hooks for other packages
var poolcleanup func()
//go:linkname sync_runtime_registerPoolCleanup sync.runtime_registerPoolCleanup
func sync_runtime_registerPoolCleanup(f func()) {
poolcleanup = f
}
func clearpools() {
// clear sync.Pools
if poolcleanup != nil {
poolcleanup()
}
// Clear central sudog cache.
// Leave per-P caches alone, they have strictly bounded size.
// Disconnect cached list before dropping it on the floor,
// so that a dangling ref to one entry does not pin all of them.
lock(&sched.sudoglock)
var sg, sgnext *sudog
for sg = sched.sudogcache; sg != nil; sg = sgnext {
sgnext = sg.next
sg.next = nil
}
sched.sudogcache = nil
unlock(&sched.sudoglock)
// Clear central defer pool.
// Leave per-P pools alone, they have strictly bounded size.
lock(&sched.deferlock)
// disconnect cached list before dropping it on the floor,
// so that a dangling ref to one entry does not pin all of them.
var d, dlink *_defer
for d = sched.deferpool; d != nil; d = dlink {
dlink = d.link
d.link = nil
}
sched.deferpool = nil
unlock(&sched.deferlock)
}
// Timing
// itoaDiv formats val/(10**dec) into buf.
func itoaDiv(buf []byte, val uint64, dec int) []byte {
i := len(buf) - 1
idec := i - dec
for val >= 10 || i >= idec {
buf[i] = byte(val%10 + '0')
i--
if i == idec {
buf[i] = '.'
i--
}
val /= 10
}
buf[i] = byte(val + '0')
return buf[i:]
}
// fmtNSAsMS nicely formats ns nanoseconds as milliseconds.
func fmtNSAsMS(buf []byte, ns uint64) []byte {
if ns >= 10e6 {
// Format as whole milliseconds.
return itoaDiv(buf, ns/1e6, 0)
}
// Format two digits of precision, with at most three decimal places.
x := ns / 1e3
if x == 0 {
buf[0] = '0'
return buf[:1]
}
dec := 3
for x >= 100 {
x /= 10
dec--
}
return itoaDiv(buf, x, dec)
}
// Helpers for testing GC.
// gcTestMoveStackOnNextCall causes the stack to be moved on a call
// immediately following the call to this. It may not work correctly
// if any other work appears after this call (such as returning).
// Typically the following call should be marked go:noinline so it
// performs a stack check.
//
// In rare cases this may not cause the stack to move, specifically if
// there's a preemption between this call and the next.
func gcTestMoveStackOnNextCall() {
gp := getg()
gp.stackguard0 = stackForceMove
}
// gcTestIsReachable performs a GC and returns a bit set where bit i
// is set if ptrs[i] is reachable.
func gcTestIsReachable(ptrs ...unsafe.Pointer) (mask uint64) {
// This takes the pointers as unsafe.Pointers in order to keep
// them live long enough for us to attach specials. After
// that, we drop our references to them.
if len(ptrs) > 64 {
panic("too many pointers for uint64 mask")
}
// Block GC while we attach specials and drop our references
// to ptrs. Otherwise, if a GC is in progress, it could mark
// them reachable via this function before we have a chance to
// drop them.
semacquire(&gcsema)
// Create reachability specials for ptrs.
specials := make([]*specialReachable, len(ptrs))
for i, p := range ptrs {
lock(&mheap_.speciallock)
s := (*specialReachable)(mheap_.specialReachableAlloc.alloc())
unlock(&mheap_.speciallock)
s.special.kind = _KindSpecialReachable
if !addspecial(p, &s.special) {
throw("already have a reachable special (duplicate pointer?)")
}
specials[i] = s
// Make sure we don't retain ptrs.
ptrs[i] = nil
}
semrelease(&gcsema)
// Force a full GC and sweep.
GC()
// Process specials.
for i, s := range specials {
if !s.done {
printlock()
println("runtime: object", i, "was not swept")
throw("IsReachable failed")
}
if s.reachable {
mask |= 1 << i
}
lock(&mheap_.speciallock)
mheap_.specialReachableAlloc.free(unsafe.Pointer(s))
unlock(&mheap_.speciallock)
}
return mask
}
// gcTestPointerClass returns the category of what p points to, one of:
// "heap", "stack", "data", "bss", "other". This is useful for checking
// that a test is doing what it's intended to do.
//
// This is nosplit simply to avoid extra pointer shuffling that may
// complicate a test.
//
//go:nosplit
func gcTestPointerClass(p unsafe.Pointer) string {
p2 := uintptr(noescape(p))
gp := getg()
if gp.stack.lo <= p2 && p2 < gp.stack.hi {
return "stack"
}
if base, _, _ := findObject(p2, 0, 0); base != 0 {
return "heap"
}
for _, datap := range activeModules() {
if datap.data <= p2 && p2 < datap.edata || datap.noptrdata <= p2 && p2 < datap.enoptrdata {
return "data"
}
if datap.bss <= p2 && p2 < datap.ebss || datap.noptrbss <= p2 && p2 <= datap.enoptrbss {
return "bss"
}
}
KeepAlive(p)
return "other"
}