blob: 9b5c667f45198aa03522676e3b08f80970ddc216 [file] [log] [blame]
// Copyright 2014 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// System calls and other sys.stuff for ARM, Darwin
// System calls are implemented in libSystem, this file contains
// trampolines that convert from Go to C calling convention.
#include "go_asm.h"
#include "go_tls.h"
#include "textflag.h"
TEXT notok<>(SB),NOSPLIT,$0
MOVW $0, R8
MOVW R8, (R8)
B 0(PC)
TEXT runtime·open_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 mode
MOVW 8(R0), R2 // arg 3 perm
MOVW 0(R0), R0 // arg 1 name
BL libc_open(SB)
RET
TEXT runtime·close_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 fd
BL libc_close(SB)
RET
TEXT runtime·write_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 buf
MOVW 8(R0), R2 // arg 3 count
MOVW 0(R0), R0 // arg 1 fd
BL libc_write(SB)
RET
TEXT runtime·read_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 buf
MOVW 8(R0), R2 // arg 3 count
MOVW 0(R0), R0 // arg 1 fd
BL libc_read(SB)
RET
TEXT runtime·exit_trampoline(SB),NOSPLIT|NOFRAME,$0
MOVW 0(R0), R0 // arg 0 code
BL libc_exit(SB)
MOVW $1234, R0
MOVW $1002, R1
MOVW R0, (R1) // fail hard
TEXT runtime·raiseproc_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R8 // signal
BL libc_getpid(SB)
// arg 1 pid already in R0 from getpid
MOVW R8, R1 // arg 2 signal
BL libc_kill(SB)
RET
TEXT runtime·mmap_trampoline(SB),NOSPLIT,$0
MOVW R0, R8
MOVW 0(R8), R0 // arg 1 addr
MOVW 4(R8), R1 // arg 2 len
MOVW 8(R8), R2 // arg 3 prot
MOVW 12(R8), R3 // arg 4 flags
MOVW 16(R8), R4 // arg 5 fid
MOVW 20(R8), R5 // arg 6 offset
MOVW $0, R6 // off_t is uint64_t
// Only R0-R3 are used for arguments, the rest
// go on the stack.
MOVM.DB.W [R4-R6], (R13)
BL libc_mmap(SB)
ADD $12, R13
MOVW $0, R1
MOVW $-1, R2
CMP R0, R2
BNE ok
BL libc_error(SB)
MOVW (R0), R1
MOVW $0, R0
ok:
MOVW R0, 24(R8) // ret 1 addr
MOVW R1, 28(R8) // ret 2 err
RET
TEXT runtime·munmap_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 len
MOVW 0(R0), R0 // arg 1 addr
BL libc_munmap(SB)
MOVW $-1, R2
CMP R0, R2
BL.EQ notok<>(SB)
RET
TEXT runtime·madvise_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 len
MOVW 8(R0), R2 // arg 3 advice
MOVW 0(R0), R0 // arg 1 addr
BL libc_madvise(SB)
MOVW $-1, R2
CMP R0, R2
BL.EQ notok<>(SB)
RET
TEXT runtime·setitimer_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 new
MOVW 8(R0), R2 // arg 3 old
MOVW 0(R0), R0 // arg 1 which
BL libc_setitimer(SB)
RET
TEXT runtime·walltime_trampoline(SB),NOSPLIT,$0
// R0 already has *timeval
MOVW $0, R1 // no timezone needed
BL libc_gettimeofday(SB)
RET
GLOBL timebase<>(SB),NOPTR,$(machTimebaseInfo__size)
TEXT runtime·nanotime_trampoline(SB),NOSPLIT,$0
MOVW R0, R8
BL libc_mach_absolute_time(SB)
MOVW R0, 0(R8)
MOVW R1, 4(R8)
MOVW timebase<>+machTimebaseInfo_numer(SB), R6
MOVW $timebase<>+machTimebaseInfo_denom(SB), R5
MOVW (R5), R7
DMB MB_ISH // memory barrier for atomic read
CMP $0, R7
BNE initialized
SUB $(machTimebaseInfo__size+7)/8*8, R13
MOVW R13, R0
BL libc_mach_timebase_info(SB)
MOVW machTimebaseInfo_numer(R13), R6
MOVW machTimebaseInfo_denom(R13), R7
ADD $(machTimebaseInfo__size+7)/8*8, R13
MOVW R6, timebase<>+machTimebaseInfo_numer(SB)
MOVW $timebase<>+machTimebaseInfo_denom(SB), R5
DMB MB_ISH // memory barrier for atomic write
MOVW R7, (R5)
DMB MB_ISH
initialized:
MOVW R6, 8(R8)
MOVW R7, 12(R8)
RET
TEXT runtime·sigfwd(SB),NOSPLIT,$0-16
MOVW sig+4(FP), R0
MOVW info+8(FP), R1
MOVW ctx+12(FP), R2
MOVW fn+0(FP), R11
MOVW R13, R4
SUB $24, R13
BIC $0x7, R13 // alignment for ELF ABI
BL (R11)
MOVW R4, R13
RET
TEXT runtime·sigtramp(SB),NOSPLIT,$0
// Reserve space for callee-save registers and arguments.
SUB $36, R13
MOVW R4, 12(R13)
MOVW R5, 16(R13)
MOVW R6, 20(R13)
MOVW R7, 24(R13)
MOVW R8, 28(R13)
MOVW R11, 32(R13)
// Save arguments.
MOVW R0, 4(R13) // sig
MOVW R1, 8(R13) // info
MOVW R2, 12(R13) // ctx
// this might be called in external code context,
// where g is not set.
MOVB runtime·iscgo(SB), R0
CMP $0, R0
BL.NE runtime·load_g(SB)
MOVW R13, R6
CMP $0, g
BEQ nog
// iOS always use the main stack to run the signal handler.
// We need to switch to gsignal ourselves.
MOVW g_m(g), R11
MOVW m_gsignal(R11), R5
MOVW (g_stack+stack_hi)(R5), R6
nog:
// Restore arguments.
MOVW 4(R13), R0
MOVW 8(R13), R1
MOVW 12(R13), R2
// Reserve space for args and the stack pointer on the
// gsignal stack.
SUB $24, R6
// Save stack pointer.
MOVW R13, R4
MOVW R4, 16(R6)
// Switch to gsignal stack.
MOVW R6, R13
// Call sigtrampgo
MOVW R0, 4(R13)
MOVW R1, 8(R13)
MOVW R2, 12(R13)
BL runtime·sigtrampgo(SB)
// Switch to old stack.
MOVW 16(R13), R5
MOVW R5, R13
// Restore callee-save registers.
MOVW 12(R13), R4
MOVW 16(R13), R5
MOVW 20(R13), R6
MOVW 24(R13), R7
MOVW 28(R13), R8
MOVW 32(R13), R11
ADD $36, R13
RET
TEXT runtime·sigprocmask_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 new
MOVW 8(R0), R2 // arg 3 old
MOVW 0(R0), R0 // arg 1 how
BL libc_pthread_sigmask(SB)
CMP $0, R0
BL.NE notok<>(SB)
RET
TEXT runtime·sigaction_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 new
MOVW 8(R0), R2 // arg 3 old
MOVW 0(R0), R0 // arg 1 how
BL libc_sigaction(SB)
RET
TEXT runtime·usleep_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 usec
BL libc_usleep(SB)
RET
TEXT ·publicationBarrier(SB),NOSPLIT|NOFRAME,$0-0
B runtime·armPublicationBarrier(SB)
TEXT runtime·sysctl_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 miblen
MOVW 8(R0), R2 // arg 3 out
MOVW 12(R0), R3 // arg 4 size
MOVW 16(R0), R4 // arg 5 dst
MOVW 20(R0), R5 // arg 6 ndst
MOVW 0(R0), R0 // arg 1 mib
// Only R0-R3 are used for arguments, the rest
// go on the stack.
MOVM.DB.W [R4-R5], (R13)
BL libc_sysctl(SB)
ADD $(2*4), R13
RET
TEXT runtime·kqueue_trampoline(SB),NOSPLIT,$0
BL libc_kqueue(SB)
RET
// int32 runtime·kevent(int kq, Kevent *changelist, int nchanges, Kevent *eventlist, int events, Timespec *timeout)
TEXT runtime·kevent_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 keventss
MOVW 8(R0), R2 // arg 3 nch
MOVW 12(R0), R3 // arg 4 ev
MOVW 16(R0), R4 // arg 5 nev
MOVW 20(R0), R5 // arg 6 ts
MOVW 0(R0), R0 // arg 1 kq
// Only R0-R3 are used for arguments, the rest
// go on the stack.
MOVM.DB.W [R4-R5], (R13)
BL libc_kevent(SB)
ADD $(2*4), R13
MOVW $-1, R2
CMP R0, R2
BNE ok
BL libc_error(SB)
MOVW (R0), R0 // errno
RSB $0, R0, R0 // caller wants it as a negative error code
ok:
RET
TEXT runtime·fcntl_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 cmd
MOVW 8(R0), R2 // arg 3 arg
MOVW 0(R0), R0 // arg 1 fd
BL libc_fcntl(SB)
RET
// sigaltstack is not supported on iOS, so our sigtramp has
// to do the stack switch ourselves.
TEXT runtime·sigaltstack_trampoline(SB),NOSPLIT,$0
MOVW $43, R0
BL libc_exit(SB)
RET
// Thread related functions
// Note: On darwin/arm, the runtime always use runtime/cgo to
// create threads, so all thread related functions will just exit with a
// unique status.
TEXT runtime·mstart_stub(SB),NOSPLIT,$0
MOVW $44, R0
BL libc_exit(SB)
RET
TEXT runtime·pthread_attr_init_trampoline(SB),NOSPLIT,$0
MOVW $45, R0
BL libc_exit(SB)
RET
TEXT runtime·pthread_attr_setstacksize_trampoline(SB),NOSPLIT,$0
MOVW $46, R0
BL libc_exit(SB)
RET
TEXT runtime·pthread_attr_setdetachstate_trampoline(SB),NOSPLIT,$0
MOVW $47, R0
BL libc_exit(SB)
RET
TEXT runtime·pthread_create_trampoline(SB),NOSPLIT,$0
MOVW $48, R0
BL libc_exit(SB)
RET
TEXT runtime·raise_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 sig
BL libc_raise(SB)
RET
TEXT runtime·pthread_mutex_init_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 attr
MOVW 0(R0), R0 // arg 1 mutex
BL libc_pthread_mutex_init(SB)
RET
TEXT runtime·pthread_mutex_lock_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 mutex
BL libc_pthread_mutex_lock(SB)
RET
TEXT runtime·pthread_mutex_unlock_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 mutex
BL libc_pthread_mutex_unlock(SB)
RET
TEXT runtime·pthread_cond_init_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 attr
MOVW 0(R0), R0 // arg 1 cond
BL libc_pthread_cond_init(SB)
RET
TEXT runtime·pthread_cond_wait_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 mutex
MOVW 0(R0), R0 // arg 1 cond
BL libc_pthread_cond_wait(SB)
RET
TEXT runtime·pthread_cond_timedwait_relative_np_trampoline(SB),NOSPLIT,$0
MOVW 4(R0), R1 // arg 2 mutex
MOVW 8(R0), R2 // arg 3 timeout
MOVW 0(R0), R0 // arg 1 cond
BL libc_pthread_cond_timedwait_relative_np(SB)
RET
TEXT runtime·pthread_cond_signal_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 cond
BL libc_pthread_cond_signal(SB)
RET