| // Copyright 2016 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| package ssa |
| |
| import ( |
| "cmd/internal/src" |
| "fmt" |
| "math" |
| ) |
| |
| type branch int |
| |
| const ( |
| unknown branch = iota |
| positive |
| negative |
| ) |
| |
| // relation represents the set of possible relations between |
| // pairs of variables (v, w). Without a priori knowledge the |
| // mask is lt | eq | gt meaning v can be less than, equal to or |
| // greater than w. When the execution path branches on the condition |
| // `v op w` the set of relations is updated to exclude any |
| // relation not possible due to `v op w` being true (or false). |
| // |
| // E.g. |
| // |
| // r := relation(...) |
| // |
| // if v < w { |
| // newR := r & lt |
| // } |
| // if v >= w { |
| // newR := r & (eq|gt) |
| // } |
| // if v != w { |
| // newR := r & (lt|gt) |
| // } |
| type relation uint |
| |
| const ( |
| lt relation = 1 << iota |
| eq |
| gt |
| ) |
| |
| var relationStrings = [...]string{ |
| 0: "none", lt: "<", eq: "==", lt | eq: "<=", |
| gt: ">", gt | lt: "!=", gt | eq: ">=", gt | eq | lt: "any", |
| } |
| |
| func (r relation) String() string { |
| if r < relation(len(relationStrings)) { |
| return relationStrings[r] |
| } |
| return fmt.Sprintf("relation(%d)", uint(r)) |
| } |
| |
| // domain represents the domain of a variable pair in which a set |
| // of relations is known. For example, relations learned for unsigned |
| // pairs cannot be transferred to signed pairs because the same bit |
| // representation can mean something else. |
| type domain uint |
| |
| const ( |
| signed domain = 1 << iota |
| unsigned |
| pointer |
| boolean |
| ) |
| |
| var domainStrings = [...]string{ |
| "signed", "unsigned", "pointer", "boolean", |
| } |
| |
| func (d domain) String() string { |
| s := "" |
| for i, ds := range domainStrings { |
| if d&(1<<uint(i)) != 0 { |
| if len(s) != 0 { |
| s += "|" |
| } |
| s += ds |
| d &^= 1 << uint(i) |
| } |
| } |
| if d != 0 { |
| if len(s) != 0 { |
| s += "|" |
| } |
| s += fmt.Sprintf("0x%x", uint(d)) |
| } |
| return s |
| } |
| |
| type pair struct { |
| v, w *Value // a pair of values, ordered by ID. |
| // v can be nil, to mean the zero value. |
| // for booleans the zero value (v == nil) is false. |
| d domain |
| } |
| |
| // fact is a pair plus a relation for that pair. |
| type fact struct { |
| p pair |
| r relation |
| } |
| |
| // a limit records known upper and lower bounds for a value. |
| type limit struct { |
| min, max int64 // min <= value <= max, signed |
| umin, umax uint64 // umin <= value <= umax, unsigned |
| } |
| |
| func (l limit) String() string { |
| return fmt.Sprintf("sm,SM,um,UM=%d,%d,%d,%d", l.min, l.max, l.umin, l.umax) |
| } |
| |
| func (l limit) intersect(l2 limit) limit { |
| if l.min < l2.min { |
| l.min = l2.min |
| } |
| if l.umin < l2.umin { |
| l.umin = l2.umin |
| } |
| if l.max > l2.max { |
| l.max = l2.max |
| } |
| if l.umax > l2.umax { |
| l.umax = l2.umax |
| } |
| return l |
| } |
| |
| var noLimit = limit{math.MinInt64, math.MaxInt64, 0, math.MaxUint64} |
| |
| // a limitFact is a limit known for a particular value. |
| type limitFact struct { |
| vid ID |
| limit limit |
| } |
| |
| // factsTable keeps track of relations between pairs of values. |
| // |
| // The fact table logic is sound, but incomplete. Outside of a few |
| // special cases, it performs no deduction or arithmetic. While there |
| // are known decision procedures for this, the ad hoc approach taken |
| // by the facts table is effective for real code while remaining very |
| // efficient. |
| type factsTable struct { |
| // unsat is true if facts contains a contradiction. |
| // |
| // Note that the factsTable logic is incomplete, so if unsat |
| // is false, the assertions in factsTable could be satisfiable |
| // *or* unsatisfiable. |
| unsat bool // true if facts contains a contradiction |
| unsatDepth int // number of unsat checkpoints |
| |
| facts map[pair]relation // current known set of relation |
| stack []fact // previous sets of relations |
| |
| // order is a couple of partial order sets that record information |
| // about relations between SSA values in the signed and unsigned |
| // domain. |
| orderS *poset |
| orderU *poset |
| |
| // known lower and upper bounds on individual values. |
| limits map[ID]limit |
| limitStack []limitFact // previous entries |
| |
| // For each slice s, a map from s to a len(s)/cap(s) value (if any) |
| // TODO: check if there are cases that matter where we have |
| // more than one len(s) for a slice. We could keep a list if necessary. |
| lens map[ID]*Value |
| caps map[ID]*Value |
| |
| // zero is a zero-valued constant |
| zero *Value |
| } |
| |
| // checkpointFact is an invalid value used for checkpointing |
| // and restoring factsTable. |
| var checkpointFact = fact{} |
| var checkpointBound = limitFact{} |
| |
| func newFactsTable(f *Func) *factsTable { |
| ft := &factsTable{} |
| ft.orderS = f.newPoset() |
| ft.orderU = f.newPoset() |
| ft.orderS.SetUnsigned(false) |
| ft.orderU.SetUnsigned(true) |
| ft.facts = make(map[pair]relation) |
| ft.stack = make([]fact, 4) |
| ft.limits = make(map[ID]limit) |
| ft.limitStack = make([]limitFact, 4) |
| ft.zero = f.ConstInt64(f.Config.Types.Int64, 0) |
| return ft |
| } |
| |
| // update updates the set of relations between v and w in domain d |
| // restricting it to r. |
| func (ft *factsTable) update(parent *Block, v, w *Value, d domain, r relation) { |
| if parent.Func.pass.debug > 2 { |
| parent.Func.Warnl(parent.Pos, "parent=%s, update %s %s %s", parent, v, w, r) |
| } |
| // No need to do anything else if we already found unsat. |
| if ft.unsat { |
| return |
| } |
| |
| // Self-fact. It's wasteful to register it into the facts |
| // table, so just note whether it's satisfiable |
| if v == w { |
| if r&eq == 0 { |
| ft.unsat = true |
| } |
| return |
| } |
| |
| if d == signed || d == unsigned { |
| var ok bool |
| order := ft.orderS |
| if d == unsigned { |
| order = ft.orderU |
| } |
| switch r { |
| case lt: |
| ok = order.SetOrder(v, w) |
| case gt: |
| ok = order.SetOrder(w, v) |
| case lt | eq: |
| ok = order.SetOrderOrEqual(v, w) |
| case gt | eq: |
| ok = order.SetOrderOrEqual(w, v) |
| case eq: |
| ok = order.SetEqual(v, w) |
| case lt | gt: |
| ok = order.SetNonEqual(v, w) |
| default: |
| panic("unknown relation") |
| } |
| if !ok { |
| if parent.Func.pass.debug > 2 { |
| parent.Func.Warnl(parent.Pos, "unsat %s %s %s", v, w, r) |
| } |
| ft.unsat = true |
| return |
| } |
| } else { |
| if lessByID(w, v) { |
| v, w = w, v |
| r = reverseBits[r] |
| } |
| |
| p := pair{v, w, d} |
| oldR, ok := ft.facts[p] |
| if !ok { |
| if v == w { |
| oldR = eq |
| } else { |
| oldR = lt | eq | gt |
| } |
| } |
| // No changes compared to information already in facts table. |
| if oldR == r { |
| return |
| } |
| ft.stack = append(ft.stack, fact{p, oldR}) |
| ft.facts[p] = oldR & r |
| // If this relation is not satisfiable, mark it and exit right away |
| if oldR&r == 0 { |
| if parent.Func.pass.debug > 2 { |
| parent.Func.Warnl(parent.Pos, "unsat %s %s %s", v, w, r) |
| } |
| ft.unsat = true |
| return |
| } |
| } |
| |
| // Extract bounds when comparing against constants |
| if v.isGenericIntConst() { |
| v, w = w, v |
| r = reverseBits[r] |
| } |
| if v != nil && w.isGenericIntConst() { |
| // Note: all the +1/-1 below could overflow/underflow. Either will |
| // still generate correct results, it will just lead to imprecision. |
| // In fact if there is overflow/underflow, the corresponding |
| // code is unreachable because the known range is outside the range |
| // of the value's type. |
| old, ok := ft.limits[v.ID] |
| if !ok { |
| old = noLimit |
| if v.isGenericIntConst() { |
| switch d { |
| case signed: |
| old.min, old.max = v.AuxInt, v.AuxInt |
| if v.AuxInt >= 0 { |
| old.umin, old.umax = uint64(v.AuxInt), uint64(v.AuxInt) |
| } |
| case unsigned: |
| old.umin = v.AuxUnsigned() |
| old.umax = old.umin |
| if int64(old.umin) >= 0 { |
| old.min, old.max = int64(old.umin), int64(old.umin) |
| } |
| } |
| } |
| } |
| lim := noLimit |
| switch d { |
| case signed: |
| c := w.AuxInt |
| switch r { |
| case lt: |
| lim.max = c - 1 |
| case lt | eq: |
| lim.max = c |
| case gt | eq: |
| lim.min = c |
| case gt: |
| lim.min = c + 1 |
| case lt | gt: |
| lim = old |
| if c == lim.min { |
| lim.min++ |
| } |
| if c == lim.max { |
| lim.max-- |
| } |
| case eq: |
| lim.min = c |
| lim.max = c |
| } |
| if lim.min >= 0 { |
| // int(x) >= 0 && int(x) >= N ⇒ uint(x) >= N |
| lim.umin = uint64(lim.min) |
| } |
| if lim.max != noLimit.max && old.min >= 0 && lim.max >= 0 { |
| // 0 <= int(x) <= N ⇒ 0 <= uint(x) <= N |
| // This is for a max update, so the lower bound |
| // comes from what we already know (old). |
| lim.umax = uint64(lim.max) |
| } |
| case unsigned: |
| uc := w.AuxUnsigned() |
| switch r { |
| case lt: |
| lim.umax = uc - 1 |
| case lt | eq: |
| lim.umax = uc |
| case gt | eq: |
| lim.umin = uc |
| case gt: |
| lim.umin = uc + 1 |
| case lt | gt: |
| lim = old |
| if uc == lim.umin { |
| lim.umin++ |
| } |
| if uc == lim.umax { |
| lim.umax-- |
| } |
| case eq: |
| lim.umin = uc |
| lim.umax = uc |
| } |
| // We could use the contrapositives of the |
| // signed implications to derive signed facts, |
| // but it turns out not to matter. |
| } |
| ft.limitStack = append(ft.limitStack, limitFact{v.ID, old}) |
| lim = old.intersect(lim) |
| ft.limits[v.ID] = lim |
| if v.Block.Func.pass.debug > 2 { |
| v.Block.Func.Warnl(parent.Pos, "parent=%s, new limits %s %s %s %s", parent, v, w, r, lim.String()) |
| } |
| if lim.min > lim.max || lim.umin > lim.umax { |
| ft.unsat = true |
| return |
| } |
| } |
| |
| // Derived facts below here are only about numbers. |
| if d != signed && d != unsigned { |
| return |
| } |
| |
| // Additional facts we know given the relationship between len and cap. |
| // |
| // TODO: Since prove now derives transitive relations, it |
| // should be sufficient to learn that len(w) <= cap(w) at the |
| // beginning of prove where we look for all len/cap ops. |
| if v.Op == OpSliceLen && r< == 0 && ft.caps[v.Args[0].ID] != nil { |
| // len(s) > w implies cap(s) > w |
| // len(s) >= w implies cap(s) >= w |
| // len(s) == w implies cap(s) >= w |
| ft.update(parent, ft.caps[v.Args[0].ID], w, d, r|gt) |
| } |
| if w.Op == OpSliceLen && r> == 0 && ft.caps[w.Args[0].ID] != nil { |
| // same, length on the RHS. |
| ft.update(parent, v, ft.caps[w.Args[0].ID], d, r|lt) |
| } |
| if v.Op == OpSliceCap && r> == 0 && ft.lens[v.Args[0].ID] != nil { |
| // cap(s) < w implies len(s) < w |
| // cap(s) <= w implies len(s) <= w |
| // cap(s) == w implies len(s) <= w |
| ft.update(parent, ft.lens[v.Args[0].ID], w, d, r|lt) |
| } |
| if w.Op == OpSliceCap && r< == 0 && ft.lens[w.Args[0].ID] != nil { |
| // same, capacity on the RHS. |
| ft.update(parent, v, ft.lens[w.Args[0].ID], d, r|gt) |
| } |
| |
| // Process fence-post implications. |
| // |
| // First, make the condition > or >=. |
| if r == lt || r == lt|eq { |
| v, w = w, v |
| r = reverseBits[r] |
| } |
| switch r { |
| case gt: |
| if x, delta := isConstDelta(v); x != nil && delta == 1 { |
| // x+1 > w ⇒ x >= w |
| // |
| // This is useful for eliminating the |
| // growslice branch of append. |
| ft.update(parent, x, w, d, gt|eq) |
| } else if x, delta := isConstDelta(w); x != nil && delta == -1 { |
| // v > x-1 ⇒ v >= x |
| ft.update(parent, v, x, d, gt|eq) |
| } |
| case gt | eq: |
| if x, delta := isConstDelta(v); x != nil && delta == -1 { |
| // x-1 >= w && x > min ⇒ x > w |
| // |
| // Useful for i > 0; s[i-1]. |
| lim, ok := ft.limits[x.ID] |
| if ok && ((d == signed && lim.min > opMin[v.Op]) || (d == unsigned && lim.umin > 0)) { |
| ft.update(parent, x, w, d, gt) |
| } |
| } else if x, delta := isConstDelta(w); x != nil && delta == 1 { |
| // v >= x+1 && x < max ⇒ v > x |
| lim, ok := ft.limits[x.ID] |
| if ok && ((d == signed && lim.max < opMax[w.Op]) || (d == unsigned && lim.umax < opUMax[w.Op])) { |
| ft.update(parent, v, x, d, gt) |
| } |
| } |
| } |
| |
| // Process: x+delta > w (with delta constant) |
| // Only signed domain for now (useful for accesses to slices in loops). |
| if r == gt || r == gt|eq { |
| if x, delta := isConstDelta(v); x != nil && d == signed { |
| if parent.Func.pass.debug > 1 { |
| parent.Func.Warnl(parent.Pos, "x+d %s w; x:%v %v delta:%v w:%v d:%v", r, x, parent.String(), delta, w.AuxInt, d) |
| } |
| if !w.isGenericIntConst() { |
| // If we know that x+delta > w but w is not constant, we can derive: |
| // if delta < 0 and x > MinInt - delta, then x > w (because x+delta cannot underflow) |
| // This is useful for loops with bounds "len(slice)-K" (delta = -K) |
| if l, has := ft.limits[x.ID]; has && delta < 0 { |
| if (x.Type.Size() == 8 && l.min >= math.MinInt64-delta) || |
| (x.Type.Size() == 4 && l.min >= math.MinInt32-delta) { |
| ft.update(parent, x, w, signed, r) |
| } |
| } |
| } else { |
| // With w,delta constants, we want to derive: x+delta > w ⇒ x > w-delta |
| // |
| // We compute (using integers of the correct size): |
| // min = w - delta |
| // max = MaxInt - delta |
| // |
| // And we prove that: |
| // if min<max: min < x AND x <= max |
| // if min>max: min < x OR x <= max |
| // |
| // This is always correct, even in case of overflow. |
| // |
| // If the initial fact is x+delta >= w instead, the derived conditions are: |
| // if min<max: min <= x AND x <= max |
| // if min>max: min <= x OR x <= max |
| // |
| // Notice the conditions for max are still <=, as they handle overflows. |
| var min, max int64 |
| var vmin, vmax *Value |
| switch x.Type.Size() { |
| case 8: |
| min = w.AuxInt - delta |
| max = int64(^uint64(0)>>1) - delta |
| |
| vmin = parent.NewValue0I(parent.Pos, OpConst64, parent.Func.Config.Types.Int64, min) |
| vmax = parent.NewValue0I(parent.Pos, OpConst64, parent.Func.Config.Types.Int64, max) |
| |
| case 4: |
| min = int64(int32(w.AuxInt) - int32(delta)) |
| max = int64(int32(^uint32(0)>>1) - int32(delta)) |
| |
| vmin = parent.NewValue0I(parent.Pos, OpConst32, parent.Func.Config.Types.Int32, min) |
| vmax = parent.NewValue0I(parent.Pos, OpConst32, parent.Func.Config.Types.Int32, max) |
| |
| default: |
| panic("unimplemented") |
| } |
| |
| if min < max { |
| // Record that x > min and max >= x |
| ft.update(parent, x, vmin, d, r) |
| ft.update(parent, vmax, x, d, r|eq) |
| } else { |
| // We know that either x>min OR x<=max. factsTable cannot record OR conditions, |
| // so let's see if we can already prove that one of them is false, in which case |
| // the other must be true |
| if l, has := ft.limits[x.ID]; has { |
| if l.max <= min { |
| if r&eq == 0 || l.max < min { |
| // x>min (x>=min) is impossible, so it must be x<=max |
| ft.update(parent, vmax, x, d, r|eq) |
| } |
| } else if l.min > max { |
| // x<=max is impossible, so it must be x>min |
| ft.update(parent, x, vmin, d, r) |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| // Look through value-preserving extensions. |
| // If the domain is appropriate for the pre-extension Type, |
| // repeat the update with the pre-extension Value. |
| if isCleanExt(v) { |
| switch { |
| case d == signed && v.Args[0].Type.IsSigned(): |
| fallthrough |
| case d == unsigned && !v.Args[0].Type.IsSigned(): |
| ft.update(parent, v.Args[0], w, d, r) |
| } |
| } |
| if isCleanExt(w) { |
| switch { |
| case d == signed && w.Args[0].Type.IsSigned(): |
| fallthrough |
| case d == unsigned && !w.Args[0].Type.IsSigned(): |
| ft.update(parent, v, w.Args[0], d, r) |
| } |
| } |
| } |
| |
| var opMin = map[Op]int64{ |
| OpAdd64: math.MinInt64, OpSub64: math.MinInt64, |
| OpAdd32: math.MinInt32, OpSub32: math.MinInt32, |
| } |
| |
| var opMax = map[Op]int64{ |
| OpAdd64: math.MaxInt64, OpSub64: math.MaxInt64, |
| OpAdd32: math.MaxInt32, OpSub32: math.MaxInt32, |
| } |
| |
| var opUMax = map[Op]uint64{ |
| OpAdd64: math.MaxUint64, OpSub64: math.MaxUint64, |
| OpAdd32: math.MaxUint32, OpSub32: math.MaxUint32, |
| } |
| |
| // isNonNegative reports whether v is known to be non-negative. |
| func (ft *factsTable) isNonNegative(v *Value) bool { |
| if isNonNegative(v) { |
| return true |
| } |
| |
| var max int64 |
| switch v.Type.Size() { |
| case 1: |
| max = math.MaxInt8 |
| case 2: |
| max = math.MaxInt16 |
| case 4: |
| max = math.MaxInt32 |
| case 8: |
| max = math.MaxInt64 |
| default: |
| panic("unexpected integer size") |
| } |
| |
| // Check if the recorded limits can prove that the value is positive |
| |
| if l, has := ft.limits[v.ID]; has && (l.min >= 0 || l.umax <= uint64(max)) { |
| return true |
| } |
| |
| // Check if v = x+delta, and we can use x's limits to prove that it's positive |
| if x, delta := isConstDelta(v); x != nil { |
| if l, has := ft.limits[x.ID]; has { |
| if delta > 0 && l.min >= -delta && l.max <= max-delta { |
| return true |
| } |
| if delta < 0 && l.min >= -delta { |
| return true |
| } |
| } |
| } |
| |
| // Check if v is a value-preserving extension of a non-negative value. |
| if isCleanExt(v) && ft.isNonNegative(v.Args[0]) { |
| return true |
| } |
| |
| // Check if the signed poset can prove that the value is >= 0 |
| return ft.orderS.OrderedOrEqual(ft.zero, v) |
| } |
| |
| // checkpoint saves the current state of known relations. |
| // Called when descending on a branch. |
| func (ft *factsTable) checkpoint() { |
| if ft.unsat { |
| ft.unsatDepth++ |
| } |
| ft.stack = append(ft.stack, checkpointFact) |
| ft.limitStack = append(ft.limitStack, checkpointBound) |
| ft.orderS.Checkpoint() |
| ft.orderU.Checkpoint() |
| } |
| |
| // restore restores known relation to the state just |
| // before the previous checkpoint. |
| // Called when backing up on a branch. |
| func (ft *factsTable) restore() { |
| if ft.unsatDepth > 0 { |
| ft.unsatDepth-- |
| } else { |
| ft.unsat = false |
| } |
| for { |
| old := ft.stack[len(ft.stack)-1] |
| ft.stack = ft.stack[:len(ft.stack)-1] |
| if old == checkpointFact { |
| break |
| } |
| if old.r == lt|eq|gt { |
| delete(ft.facts, old.p) |
| } else { |
| ft.facts[old.p] = old.r |
| } |
| } |
| for { |
| old := ft.limitStack[len(ft.limitStack)-1] |
| ft.limitStack = ft.limitStack[:len(ft.limitStack)-1] |
| if old.vid == 0 { // checkpointBound |
| break |
| } |
| if old.limit == noLimit { |
| delete(ft.limits, old.vid) |
| } else { |
| ft.limits[old.vid] = old.limit |
| } |
| } |
| ft.orderS.Undo() |
| ft.orderU.Undo() |
| } |
| |
| func lessByID(v, w *Value) bool { |
| if v == nil && w == nil { |
| // Should not happen, but just in case. |
| return false |
| } |
| if v == nil { |
| return true |
| } |
| return w != nil && v.ID < w.ID |
| } |
| |
| var ( |
| reverseBits = [...]relation{0, 4, 2, 6, 1, 5, 3, 7} |
| |
| // maps what we learn when the positive branch is taken. |
| // For example: |
| // OpLess8: {signed, lt}, |
| // v1 = (OpLess8 v2 v3). |
| // If v1 branch is taken then we learn that the rangeMask |
| // can be at most lt. |
| domainRelationTable = map[Op]struct { |
| d domain |
| r relation |
| }{ |
| OpEq8: {signed | unsigned, eq}, |
| OpEq16: {signed | unsigned, eq}, |
| OpEq32: {signed | unsigned, eq}, |
| OpEq64: {signed | unsigned, eq}, |
| OpEqPtr: {pointer, eq}, |
| |
| OpNeq8: {signed | unsigned, lt | gt}, |
| OpNeq16: {signed | unsigned, lt | gt}, |
| OpNeq32: {signed | unsigned, lt | gt}, |
| OpNeq64: {signed | unsigned, lt | gt}, |
| OpNeqPtr: {pointer, lt | gt}, |
| |
| OpLess8: {signed, lt}, |
| OpLess8U: {unsigned, lt}, |
| OpLess16: {signed, lt}, |
| OpLess16U: {unsigned, lt}, |
| OpLess32: {signed, lt}, |
| OpLess32U: {unsigned, lt}, |
| OpLess64: {signed, lt}, |
| OpLess64U: {unsigned, lt}, |
| |
| OpLeq8: {signed, lt | eq}, |
| OpLeq8U: {unsigned, lt | eq}, |
| OpLeq16: {signed, lt | eq}, |
| OpLeq16U: {unsigned, lt | eq}, |
| OpLeq32: {signed, lt | eq}, |
| OpLeq32U: {unsigned, lt | eq}, |
| OpLeq64: {signed, lt | eq}, |
| OpLeq64U: {unsigned, lt | eq}, |
| |
| // For these ops, the negative branch is different: we can only |
| // prove signed/GE (signed/GT) if we can prove that arg0 is non-negative. |
| // See the special case in addBranchRestrictions. |
| OpIsInBounds: {signed | unsigned, lt}, // 0 <= arg0 < arg1 |
| OpIsSliceInBounds: {signed | unsigned, lt | eq}, // 0 <= arg0 <= arg1 |
| } |
| ) |
| |
| // cleanup returns the posets to the free list |
| func (ft *factsTable) cleanup(f *Func) { |
| for _, po := range []*poset{ft.orderS, ft.orderU} { |
| // Make sure it's empty as it should be. A non-empty poset |
| // might cause errors and miscompilations if reused. |
| if checkEnabled { |
| if err := po.CheckEmpty(); err != nil { |
| f.Fatalf("poset not empty after function %s: %v", f.Name, err) |
| } |
| } |
| f.retPoset(po) |
| } |
| } |
| |
| // prove removes redundant BlockIf branches that can be inferred |
| // from previous dominating comparisons. |
| // |
| // By far, the most common redundant pair are generated by bounds checking. |
| // For example for the code: |
| // |
| // a[i] = 4 |
| // foo(a[i]) |
| // |
| // The compiler will generate the following code: |
| // |
| // if i >= len(a) { |
| // panic("not in bounds") |
| // } |
| // a[i] = 4 |
| // if i >= len(a) { |
| // panic("not in bounds") |
| // } |
| // foo(a[i]) |
| // |
| // The second comparison i >= len(a) is clearly redundant because if the |
| // else branch of the first comparison is executed, we already know that i < len(a). |
| // The code for the second panic can be removed. |
| // |
| // prove works by finding contradictions and trimming branches whose |
| // conditions are unsatisfiable given the branches leading up to them. |
| // It tracks a "fact table" of branch conditions. For each branching |
| // block, it asserts the branch conditions that uniquely dominate that |
| // block, and then separately asserts the block's branch condition and |
| // its negation. If either leads to a contradiction, it can trim that |
| // successor. |
| func prove(f *Func) { |
| ft := newFactsTable(f) |
| ft.checkpoint() |
| |
| var lensVars map[*Block][]*Value |
| |
| // Find length and capacity ops. |
| for _, b := range f.Blocks { |
| for _, v := range b.Values { |
| if v.Uses == 0 { |
| // We don't care about dead values. |
| // (There can be some that are CSEd but not removed yet.) |
| continue |
| } |
| switch v.Op { |
| case OpStringLen: |
| ft.update(b, v, ft.zero, signed, gt|eq) |
| case OpSliceLen: |
| if ft.lens == nil { |
| ft.lens = map[ID]*Value{} |
| } |
| // Set all len Values for the same slice as equal in the poset. |
| // The poset handles transitive relations, so Values related to |
| // any OpSliceLen for this slice will be correctly related to others. |
| if l, ok := ft.lens[v.Args[0].ID]; ok { |
| ft.update(b, v, l, signed, eq) |
| } else { |
| ft.lens[v.Args[0].ID] = v |
| } |
| ft.update(b, v, ft.zero, signed, gt|eq) |
| if v.Args[0].Op == OpSliceMake { |
| if lensVars == nil { |
| lensVars = make(map[*Block][]*Value) |
| } |
| lensVars[b] = append(lensVars[b], v) |
| } |
| case OpSliceCap: |
| if ft.caps == nil { |
| ft.caps = map[ID]*Value{} |
| } |
| // Same as case OpSliceLen above, but for slice cap. |
| if c, ok := ft.caps[v.Args[0].ID]; ok { |
| ft.update(b, v, c, signed, eq) |
| } else { |
| ft.caps[v.Args[0].ID] = v |
| } |
| ft.update(b, v, ft.zero, signed, gt|eq) |
| if v.Args[0].Op == OpSliceMake { |
| if lensVars == nil { |
| lensVars = make(map[*Block][]*Value) |
| } |
| lensVars[b] = append(lensVars[b], v) |
| } |
| } |
| } |
| } |
| |
| // Find induction variables. Currently, findIndVars |
| // is limited to one induction variable per block. |
| var indVars map[*Block]indVar |
| for _, v := range findIndVar(f) { |
| if indVars == nil { |
| indVars = make(map[*Block]indVar) |
| } |
| indVars[v.entry] = v |
| } |
| |
| // current node state |
| type walkState int |
| const ( |
| descend walkState = iota |
| simplify |
| ) |
| // work maintains the DFS stack. |
| type bp struct { |
| block *Block // current handled block |
| state walkState // what's to do |
| } |
| work := make([]bp, 0, 256) |
| work = append(work, bp{ |
| block: f.Entry, |
| state: descend, |
| }) |
| |
| idom := f.Idom() |
| sdom := f.Sdom() |
| |
| // DFS on the dominator tree. |
| // |
| // For efficiency, we consider only the dominator tree rather |
| // than the entire flow graph. On the way down, we consider |
| // incoming branches and accumulate conditions that uniquely |
| // dominate the current block. If we discover a contradiction, |
| // we can eliminate the entire block and all of its children. |
| // On the way back up, we consider outgoing branches that |
| // haven't already been considered. This way we consider each |
| // branch condition only once. |
| for len(work) > 0 { |
| node := work[len(work)-1] |
| work = work[:len(work)-1] |
| parent := idom[node.block.ID] |
| branch := getBranch(sdom, parent, node.block) |
| |
| switch node.state { |
| case descend: |
| ft.checkpoint() |
| |
| // Entering the block, add the block-depending facts that we collected |
| // at the beginning: induction variables and lens/caps of slices. |
| if iv, ok := indVars[node.block]; ok { |
| addIndVarRestrictions(ft, parent, iv) |
| } |
| if lens, ok := lensVars[node.block]; ok { |
| for _, v := range lens { |
| switch v.Op { |
| case OpSliceLen: |
| ft.update(node.block, v, v.Args[0].Args[1], signed, eq) |
| case OpSliceCap: |
| ft.update(node.block, v, v.Args[0].Args[2], signed, eq) |
| } |
| } |
| } |
| |
| if branch != unknown { |
| addBranchRestrictions(ft, parent, branch) |
| if ft.unsat { |
| // node.block is unreachable. |
| // Remove it and don't visit |
| // its children. |
| removeBranch(parent, branch) |
| ft.restore() |
| break |
| } |
| // Otherwise, we can now commit to |
| // taking this branch. We'll restore |
| // ft when we unwind. |
| } |
| |
| // Add inductive facts for phis in this block. |
| addLocalInductiveFacts(ft, node.block) |
| |
| work = append(work, bp{ |
| block: node.block, |
| state: simplify, |
| }) |
| for s := sdom.Child(node.block); s != nil; s = sdom.Sibling(s) { |
| work = append(work, bp{ |
| block: s, |
| state: descend, |
| }) |
| } |
| |
| case simplify: |
| simplifyBlock(sdom, ft, node.block) |
| ft.restore() |
| } |
| } |
| |
| ft.restore() |
| |
| ft.cleanup(f) |
| } |
| |
| // getBranch returns the range restrictions added by p |
| // when reaching b. p is the immediate dominator of b. |
| func getBranch(sdom SparseTree, p *Block, b *Block) branch { |
| if p == nil || p.Kind != BlockIf { |
| return unknown |
| } |
| // If p and p.Succs[0] are dominators it means that every path |
| // from entry to b passes through p and p.Succs[0]. We care that |
| // no path from entry to b passes through p.Succs[1]. If p.Succs[0] |
| // has one predecessor then (apart from the degenerate case), |
| // there is no path from entry that can reach b through p.Succs[1]. |
| // TODO: how about p->yes->b->yes, i.e. a loop in yes. |
| if sdom.IsAncestorEq(p.Succs[0].b, b) && len(p.Succs[0].b.Preds) == 1 { |
| return positive |
| } |
| if sdom.IsAncestorEq(p.Succs[1].b, b) && len(p.Succs[1].b.Preds) == 1 { |
| return negative |
| } |
| return unknown |
| } |
| |
| // addIndVarRestrictions updates the factsTables ft with the facts |
| // learned from the induction variable indVar which drives the loop |
| // starting in Block b. |
| func addIndVarRestrictions(ft *factsTable, b *Block, iv indVar) { |
| d := signed |
| if ft.isNonNegative(iv.min) && ft.isNonNegative(iv.max) { |
| d |= unsigned |
| } |
| |
| if iv.flags&indVarMinExc == 0 { |
| addRestrictions(b, ft, d, iv.min, iv.ind, lt|eq) |
| } else { |
| addRestrictions(b, ft, d, iv.min, iv.ind, lt) |
| } |
| |
| if iv.flags&indVarMaxInc == 0 { |
| addRestrictions(b, ft, d, iv.ind, iv.max, lt) |
| } else { |
| addRestrictions(b, ft, d, iv.ind, iv.max, lt|eq) |
| } |
| } |
| |
| // addBranchRestrictions updates the factsTables ft with the facts learned when |
| // branching from Block b in direction br. |
| func addBranchRestrictions(ft *factsTable, b *Block, br branch) { |
| c := b.Controls[0] |
| switch br { |
| case negative: |
| addRestrictions(b, ft, boolean, nil, c, eq) |
| case positive: |
| addRestrictions(b, ft, boolean, nil, c, lt|gt) |
| default: |
| panic("unknown branch") |
| } |
| if tr, has := domainRelationTable[c.Op]; has { |
| // When we branched from parent we learned a new set of |
| // restrictions. Update the factsTable accordingly. |
| d := tr.d |
| if d == signed && ft.isNonNegative(c.Args[0]) && ft.isNonNegative(c.Args[1]) { |
| d |= unsigned |
| } |
| switch c.Op { |
| case OpIsInBounds, OpIsSliceInBounds: |
| // 0 <= a0 < a1 (or 0 <= a0 <= a1) |
| // |
| // On the positive branch, we learn: |
| // signed: 0 <= a0 < a1 (or 0 <= a0 <= a1) |
| // unsigned: a0 < a1 (or a0 <= a1) |
| // |
| // On the negative branch, we learn (0 > a0 || |
| // a0 >= a1). In the unsigned domain, this is |
| // simply a0 >= a1 (which is the reverse of the |
| // positive branch, so nothing surprising). |
| // But in the signed domain, we can't express the || |
| // condition, so check if a0 is non-negative instead, |
| // to be able to learn something. |
| switch br { |
| case negative: |
| d = unsigned |
| if ft.isNonNegative(c.Args[0]) { |
| d |= signed |
| } |
| addRestrictions(b, ft, d, c.Args[0], c.Args[1], tr.r^(lt|gt|eq)) |
| case positive: |
| addRestrictions(b, ft, signed, ft.zero, c.Args[0], lt|eq) |
| addRestrictions(b, ft, d, c.Args[0], c.Args[1], tr.r) |
| } |
| default: |
| switch br { |
| case negative: |
| addRestrictions(b, ft, d, c.Args[0], c.Args[1], tr.r^(lt|gt|eq)) |
| case positive: |
| addRestrictions(b, ft, d, c.Args[0], c.Args[1], tr.r) |
| } |
| } |
| |
| } |
| } |
| |
| // addRestrictions updates restrictions from the immediate |
| // dominating block (p) using r. |
| func addRestrictions(parent *Block, ft *factsTable, t domain, v, w *Value, r relation) { |
| if t == 0 { |
| // Trivial case: nothing to do. |
| // Shoult not happen, but just in case. |
| return |
| } |
| for i := domain(1); i <= t; i <<= 1 { |
| if t&i == 0 { |
| continue |
| } |
| ft.update(parent, v, w, i, r) |
| } |
| } |
| |
| // addLocalInductiveFacts adds inductive facts when visiting b, where |
| // b is a join point in a loop. In contrast with findIndVar, this |
| // depends on facts established for b, which is why it happens when |
| // visiting b. addLocalInductiveFacts specifically targets the pattern |
| // created by OFORUNTIL, which isn't detected by findIndVar. |
| // |
| // TODO: It would be nice to combine this with findIndVar. |
| func addLocalInductiveFacts(ft *factsTable, b *Block) { |
| // This looks for a specific pattern of induction: |
| // |
| // 1. i1 = OpPhi(min, i2) in b |
| // 2. i2 = i1 + 1 |
| // 3. i2 < max at exit from b.Preds[1] |
| // 4. min < max |
| // |
| // If all of these conditions are true, then i1 < max and i1 >= min. |
| |
| // To ensure this is a loop header node. |
| if len(b.Preds) != 2 { |
| return |
| } |
| |
| for _, i1 := range b.Values { |
| if i1.Op != OpPhi { |
| continue |
| } |
| |
| // Check for conditions 1 and 2. This is easy to do |
| // and will throw out most phis. |
| min, i2 := i1.Args[0], i1.Args[1] |
| if i1q, delta := isConstDelta(i2); i1q != i1 || delta != 1 { |
| continue |
| } |
| |
| // Try to prove condition 3. We can't just query the |
| // fact table for this because we don't know what the |
| // facts of b.Preds[1] are (in general, b.Preds[1] is |
| // a loop-back edge, so we haven't even been there |
| // yet). As a conservative approximation, we look for |
| // this condition in the predecessor chain until we |
| // hit a join point. |
| uniquePred := func(b *Block) *Block { |
| if len(b.Preds) == 1 { |
| return b.Preds[0].b |
| } |
| return nil |
| } |
| pred, child := b.Preds[1].b, b |
| for ; pred != nil; pred, child = uniquePred(pred), pred { |
| if pred.Kind != BlockIf { |
| continue |
| } |
| control := pred.Controls[0] |
| |
| br := unknown |
| if pred.Succs[0].b == child { |
| br = positive |
| } |
| if pred.Succs[1].b == child { |
| if br != unknown { |
| continue |
| } |
| br = negative |
| } |
| if br == unknown { |
| continue |
| } |
| |
| tr, has := domainRelationTable[control.Op] |
| if !has { |
| continue |
| } |
| r := tr.r |
| if br == negative { |
| // Negative branch taken to reach b. |
| // Complement the relations. |
| r = (lt | eq | gt) ^ r |
| } |
| |
| // Check for i2 < max or max > i2. |
| var max *Value |
| if r == lt && control.Args[0] == i2 { |
| max = control.Args[1] |
| } else if r == gt && control.Args[1] == i2 { |
| max = control.Args[0] |
| } else { |
| continue |
| } |
| |
| // Check condition 4 now that we have a |
| // candidate max. For this we can query the |
| // fact table. We "prove" min < max by showing |
| // that min >= max is unsat. (This may simply |
| // compare two constants; that's fine.) |
| ft.checkpoint() |
| ft.update(b, min, max, tr.d, gt|eq) |
| proved := ft.unsat |
| ft.restore() |
| |
| if proved { |
| // We know that min <= i1 < max. |
| if b.Func.pass.debug > 0 { |
| printIndVar(b, i1, min, max, 1, 0) |
| } |
| ft.update(b, min, i1, tr.d, lt|eq) |
| ft.update(b, i1, max, tr.d, lt) |
| } |
| } |
| } |
| } |
| |
| var ctzNonZeroOp = map[Op]Op{OpCtz8: OpCtz8NonZero, OpCtz16: OpCtz16NonZero, OpCtz32: OpCtz32NonZero, OpCtz64: OpCtz64NonZero} |
| var mostNegativeDividend = map[Op]int64{ |
| OpDiv16: -1 << 15, |
| OpMod16: -1 << 15, |
| OpDiv32: -1 << 31, |
| OpMod32: -1 << 31, |
| OpDiv64: -1 << 63, |
| OpMod64: -1 << 63} |
| |
| // simplifyBlock simplifies some constant values in b and evaluates |
| // branches to non-uniquely dominated successors of b. |
| func simplifyBlock(sdom SparseTree, ft *factsTable, b *Block) { |
| for _, v := range b.Values { |
| switch v.Op { |
| case OpSlicemask: |
| // Replace OpSlicemask operations in b with constants where possible. |
| x, delta := isConstDelta(v.Args[0]) |
| if x == nil { |
| continue |
| } |
| // slicemask(x + y) |
| // if x is larger than -y (y is negative), then slicemask is -1. |
| lim, ok := ft.limits[x.ID] |
| if !ok { |
| continue |
| } |
| if lim.umin > uint64(-delta) { |
| if v.Args[0].Op == OpAdd64 { |
| v.reset(OpConst64) |
| } else { |
| v.reset(OpConst32) |
| } |
| if b.Func.pass.debug > 0 { |
| b.Func.Warnl(v.Pos, "Proved slicemask not needed") |
| } |
| v.AuxInt = -1 |
| } |
| case OpCtz8, OpCtz16, OpCtz32, OpCtz64: |
| // On some architectures, notably amd64, we can generate much better |
| // code for CtzNN if we know that the argument is non-zero. |
| // Capture that information here for use in arch-specific optimizations. |
| x := v.Args[0] |
| lim, ok := ft.limits[x.ID] |
| if !ok { |
| continue |
| } |
| if lim.umin > 0 || lim.min > 0 || lim.max < 0 { |
| if b.Func.pass.debug > 0 { |
| b.Func.Warnl(v.Pos, "Proved %v non-zero", v.Op) |
| } |
| v.Op = ctzNonZeroOp[v.Op] |
| } |
| case OpRsh8x8, OpRsh8x16, OpRsh8x32, OpRsh8x64, |
| OpRsh16x8, OpRsh16x16, OpRsh16x32, OpRsh16x64, |
| OpRsh32x8, OpRsh32x16, OpRsh32x32, OpRsh32x64, |
| OpRsh64x8, OpRsh64x16, OpRsh64x32, OpRsh64x64: |
| // Check whether, for a >> b, we know that a is non-negative |
| // and b is all of a's bits except the MSB. If so, a is shifted to zero. |
| bits := 8 * v.Type.Size() |
| if v.Args[1].isGenericIntConst() && v.Args[1].AuxInt >= bits-1 && ft.isNonNegative(v.Args[0]) { |
| if b.Func.pass.debug > 0 { |
| b.Func.Warnl(v.Pos, "Proved %v shifts to zero", v.Op) |
| } |
| switch bits { |
| case 64: |
| v.reset(OpConst64) |
| case 32: |
| v.reset(OpConst32) |
| case 16: |
| v.reset(OpConst16) |
| case 8: |
| v.reset(OpConst8) |
| default: |
| panic("unexpected integer size") |
| } |
| v.AuxInt = 0 |
| continue // Be sure not to fallthrough - this is no longer OpRsh. |
| } |
| // If the Rsh hasn't been replaced with 0, still check if it is bounded. |
| fallthrough |
| case OpLsh8x8, OpLsh8x16, OpLsh8x32, OpLsh8x64, |
| OpLsh16x8, OpLsh16x16, OpLsh16x32, OpLsh16x64, |
| OpLsh32x8, OpLsh32x16, OpLsh32x32, OpLsh32x64, |
| OpLsh64x8, OpLsh64x16, OpLsh64x32, OpLsh64x64, |
| OpRsh8Ux8, OpRsh8Ux16, OpRsh8Ux32, OpRsh8Ux64, |
| OpRsh16Ux8, OpRsh16Ux16, OpRsh16Ux32, OpRsh16Ux64, |
| OpRsh32Ux8, OpRsh32Ux16, OpRsh32Ux32, OpRsh32Ux64, |
| OpRsh64Ux8, OpRsh64Ux16, OpRsh64Ux32, OpRsh64Ux64: |
| // Check whether, for a << b, we know that b |
| // is strictly less than the number of bits in a. |
| by := v.Args[1] |
| lim, ok := ft.limits[by.ID] |
| if !ok { |
| continue |
| } |
| bits := 8 * v.Args[0].Type.Size() |
| if lim.umax < uint64(bits) || (lim.max < bits && ft.isNonNegative(by)) { |
| v.AuxInt = 1 // see shiftIsBounded |
| if b.Func.pass.debug > 0 { |
| b.Func.Warnl(v.Pos, "Proved %v bounded", v.Op) |
| } |
| } |
| case OpDiv16, OpDiv32, OpDiv64, OpMod16, OpMod32, OpMod64: |
| // On amd64 and 386 fix-up code can be avoided if we know |
| // the divisor is not -1 or the dividend > MinIntNN. |
| // Don't modify AuxInt on other architectures, |
| // as that can interfere with CSE. |
| // TODO: add other architectures? |
| if b.Func.Config.arch != "386" && b.Func.Config.arch != "amd64" { |
| break |
| } |
| divr := v.Args[1] |
| divrLim, divrLimok := ft.limits[divr.ID] |
| divd := v.Args[0] |
| divdLim, divdLimok := ft.limits[divd.ID] |
| if (divrLimok && (divrLim.max < -1 || divrLim.min > -1)) || |
| (divdLimok && divdLim.min > mostNegativeDividend[v.Op]) { |
| // See DivisionNeedsFixUp in rewrite.go. |
| // v.AuxInt = 1 means we have proved both that the divisor is not -1 |
| // and that the dividend is not the most negative integer, |
| // so we do not need to add fix-up code. |
| v.AuxInt = 1 |
| if b.Func.pass.debug > 0 { |
| b.Func.Warnl(v.Pos, "Proved %v does not need fix-up", v.Op) |
| } |
| } |
| } |
| } |
| |
| if b.Kind != BlockIf { |
| return |
| } |
| |
| // Consider outgoing edges from this block. |
| parent := b |
| for i, branch := range [...]branch{positive, negative} { |
| child := parent.Succs[i].b |
| if getBranch(sdom, parent, child) != unknown { |
| // For edges to uniquely dominated blocks, we |
| // already did this when we visited the child. |
| continue |
| } |
| // For edges to other blocks, this can trim a branch |
| // even if we couldn't get rid of the child itself. |
| ft.checkpoint() |
| addBranchRestrictions(ft, parent, branch) |
| unsat := ft.unsat |
| ft.restore() |
| if unsat { |
| // This branch is impossible, so remove it |
| // from the block. |
| removeBranch(parent, branch) |
| // No point in considering the other branch. |
| // (It *is* possible for both to be |
| // unsatisfiable since the fact table is |
| // incomplete. We could turn this into a |
| // BlockExit, but it doesn't seem worth it.) |
| break |
| } |
| } |
| } |
| |
| func removeBranch(b *Block, branch branch) { |
| c := b.Controls[0] |
| if b.Func.pass.debug > 0 { |
| verb := "Proved" |
| if branch == positive { |
| verb = "Disproved" |
| } |
| if b.Func.pass.debug > 1 { |
| b.Func.Warnl(b.Pos, "%s %s (%s)", verb, c.Op, c) |
| } else { |
| b.Func.Warnl(b.Pos, "%s %s", verb, c.Op) |
| } |
| } |
| if c != nil && c.Pos.IsStmt() == src.PosIsStmt && c.Pos.SameFileAndLine(b.Pos) { |
| // attempt to preserve statement marker. |
| b.Pos = b.Pos.WithIsStmt() |
| } |
| b.Kind = BlockFirst |
| b.ResetControls() |
| if branch == positive { |
| b.swapSuccessors() |
| } |
| } |
| |
| // isNonNegative reports whether v is known to be greater or equal to zero. |
| func isNonNegative(v *Value) bool { |
| if !v.Type.IsInteger() { |
| v.Fatalf("isNonNegative bad type: %v", v.Type) |
| } |
| // TODO: return true if !v.Type.IsSigned() |
| // SSA isn't type-safe enough to do that now (issue 37753). |
| // The checks below depend only on the pattern of bits. |
| |
| switch v.Op { |
| case OpConst64: |
| return v.AuxInt >= 0 |
| |
| case OpConst32: |
| return int32(v.AuxInt) >= 0 |
| |
| case OpConst16: |
| return int16(v.AuxInt) >= 0 |
| |
| case OpConst8: |
| return int8(v.AuxInt) >= 0 |
| |
| case OpStringLen, OpSliceLen, OpSliceCap, |
| OpZeroExt8to64, OpZeroExt16to64, OpZeroExt32to64, |
| OpZeroExt8to32, OpZeroExt16to32, OpZeroExt8to16, |
| OpCtz64, OpCtz32, OpCtz16, OpCtz8: |
| return true |
| |
| case OpRsh64Ux64, OpRsh32Ux64: |
| by := v.Args[1] |
| return by.Op == OpConst64 && by.AuxInt > 0 |
| |
| case OpRsh64x64, OpRsh32x64, OpRsh8x64, OpRsh16x64, OpRsh32x32, OpRsh64x32, |
| OpSignExt32to64, OpSignExt16to64, OpSignExt8to64, OpSignExt16to32, OpSignExt8to32: |
| return isNonNegative(v.Args[0]) |
| |
| case OpAnd64, OpAnd32, OpAnd16, OpAnd8: |
| return isNonNegative(v.Args[0]) || isNonNegative(v.Args[1]) |
| |
| case OpMod64, OpMod32, OpMod16, OpMod8, |
| OpDiv64, OpDiv32, OpDiv16, OpDiv8, |
| OpOr64, OpOr32, OpOr16, OpOr8, |
| OpXor64, OpXor32, OpXor16, OpXor8: |
| return isNonNegative(v.Args[0]) && isNonNegative(v.Args[1]) |
| |
| // We could handle OpPhi here, but the improvements from doing |
| // so are very minor, and it is neither simple nor cheap. |
| } |
| return false |
| } |
| |
| // isConstDelta returns non-nil if v is equivalent to w+delta (signed). |
| func isConstDelta(v *Value) (w *Value, delta int64) { |
| cop := OpConst64 |
| switch v.Op { |
| case OpAdd32, OpSub32: |
| cop = OpConst32 |
| } |
| switch v.Op { |
| case OpAdd64, OpAdd32: |
| if v.Args[0].Op == cop { |
| return v.Args[1], v.Args[0].AuxInt |
| } |
| if v.Args[1].Op == cop { |
| return v.Args[0], v.Args[1].AuxInt |
| } |
| case OpSub64, OpSub32: |
| if v.Args[1].Op == cop { |
| aux := v.Args[1].AuxInt |
| if aux != -aux { // Overflow; too bad |
| return v.Args[0], -aux |
| } |
| } |
| } |
| return nil, 0 |
| } |
| |
| // isCleanExt reports whether v is the result of a value-preserving |
| // sign or zero extension |
| func isCleanExt(v *Value) bool { |
| switch v.Op { |
| case OpSignExt8to16, OpSignExt8to32, OpSignExt8to64, |
| OpSignExt16to32, OpSignExt16to64, OpSignExt32to64: |
| // signed -> signed is the only value-preserving sign extension |
| return v.Args[0].Type.IsSigned() && v.Type.IsSigned() |
| |
| case OpZeroExt8to16, OpZeroExt8to32, OpZeroExt8to64, |
| OpZeroExt16to32, OpZeroExt16to64, OpZeroExt32to64: |
| // unsigned -> signed/unsigned are value-preserving zero extensions |
| return !v.Args[0].Type.IsSigned() |
| } |
| return false |
| } |