| // Copyright 2009 The Go Authors. All rights reserved. | |
| // Use of this source code is governed by a BSD-style | |
| // license that can be found in the LICENSE file. | |
| #include "runtime.h" | |
| #include "defs.h" | |
| #include "os.h" | |
| extern SigTab sigtab[]; | |
| // Linux futex. | |
| // | |
| // futexsleep(uint32 *addr, uint32 val) | |
| // futexwakeup(uint32 *addr) | |
| // | |
| // Futexsleep atomically checks if *addr == val and if so, sleeps on addr. | |
| // Futexwakeup wakes up one thread sleeping on addr. | |
| // Futexsleep is allowed to wake up spuriously. | |
| enum | |
| { | |
| FUTEX_WAIT = 0, | |
| FUTEX_WAKE = 1, | |
| EINTR = 4, | |
| EAGAIN = 11, | |
| }; | |
| // TODO(rsc): I tried using 1<<40 here but futex woke up (-ETIMEDOUT). | |
| // I wonder if the timespec that gets to the kernel | |
| // actually has two 32-bit numbers in it, so that | |
| // a 64-bit 1<<40 ends up being 0 seconds, | |
| // 1<<8 nanoseconds. | |
| static Timespec longtime = | |
| { | |
| 1<<30, // 34 years | |
| 0 | |
| }; | |
| // Atomically, | |
| // if(*addr == val) sleep | |
| // Might be woken up spuriously; that's allowed. | |
| static void | |
| futexsleep(uint32 *addr, uint32 val) | |
| { | |
| // Some Linux kernels have a bug where futex of | |
| // FUTEX_WAIT returns an internal error code | |
| // as an errno. Libpthread ignores the return value | |
| // here, and so can we: as it says a few lines up, | |
| // spurious wakeups are allowed. | |
| futex(addr, FUTEX_WAIT, val, &longtime, nil, 0); | |
| } | |
| // If any procs are sleeping on addr, wake up at least one. | |
| static void | |
| futexwakeup(uint32 *addr) | |
| { | |
| int64 ret; | |
| ret = futex(addr, FUTEX_WAKE, 1, nil, nil, 0); | |
| if(ret >= 0) | |
| return; | |
| // I don't know that futex wakeup can return | |
| // EAGAIN or EINTR, but if it does, it would be | |
| // safe to loop and call futex again. | |
| prints("futexwakeup addr="); | |
| ·printpointer(addr); | |
| prints(" returned "); | |
| ·printint(ret); | |
| prints("\n"); | |
| *(int32*)0x1006 = 0x1006; | |
| } | |
| // Lock and unlock. | |
| // | |
| // The lock state is a single 32-bit word that holds | |
| // a 31-bit count of threads waiting for the lock | |
| // and a single bit (the low bit) saying whether the lock is held. | |
| // The uncontended case runs entirely in user space. | |
| // When contention is detected, we defer to the kernel (futex). | |
| // | |
| // A reminder: compare-and-swap cas(addr, old, new) does | |
| // if(*addr == old) { *addr = new; return 1; } | |
| // else return 0; | |
| // but atomically. | |
| static void | |
| futexlock(Lock *l) | |
| { | |
| uint32 v; | |
| again: | |
| v = l->key; | |
| if((v&1) == 0){ | |
| if(cas(&l->key, v, v|1)){ | |
| // Lock wasn't held; we grabbed it. | |
| return; | |
| } | |
| goto again; | |
| } | |
| // Lock was held; try to add ourselves to the waiter count. | |
| if(!cas(&l->key, v, v+2)) | |
| goto again; | |
| // We're accounted for, now sleep in the kernel. | |
| // | |
| // We avoid the obvious lock/unlock race because | |
| // the kernel won't put us to sleep if l->key has | |
| // changed underfoot and is no longer v+2. | |
| // | |
| // We only really care that (v&1) == 1 (the lock is held), | |
| // and in fact there is a futex variant that could | |
| // accomodate that check, but let's not get carried away.) | |
| futexsleep(&l->key, v+2); | |
| // We're awake: remove ourselves from the count. | |
| for(;;){ | |
| v = l->key; | |
| if(v < 2) | |
| throw("bad lock key"); | |
| if(cas(&l->key, v, v-2)) | |
| break; | |
| } | |
| // Try for the lock again. | |
| goto again; | |
| } | |
| static void | |
| futexunlock(Lock *l) | |
| { | |
| uint32 v; | |
| // Atomically get value and clear lock bit. | |
| again: | |
| v = l->key; | |
| if((v&1) == 0) | |
| throw("unlock of unlocked lock"); | |
| if(!cas(&l->key, v, v&~1)) | |
| goto again; | |
| // If there were waiters, wake one. | |
| if(v & ~1) | |
| futexwakeup(&l->key); | |
| } | |
| void | |
| lock(Lock *l) | |
| { | |
| if(m->locks < 0) | |
| throw("lock count"); | |
| m->locks++; | |
| futexlock(l); | |
| } | |
| void | |
| unlock(Lock *l) | |
| { | |
| m->locks--; | |
| if(m->locks < 0) | |
| throw("lock count"); | |
| futexunlock(l); | |
| } | |
| void | |
| destroylock(Lock *l) | |
| { | |
| } | |
| // One-time notifications. | |
| // | |
| // Since the lock/unlock implementation already | |
| // takes care of sleeping in the kernel, we just reuse it. | |
| // (But it's a weird use, so it gets its own interface.) | |
| // | |
| // We use a lock to represent the event: | |
| // unlocked == event has happened. | |
| // Thus the lock starts out locked, and to wait for the | |
| // event you try to lock the lock. To signal the event, | |
| // you unlock the lock. | |
| void | |
| noteclear(Note *n) | |
| { | |
| n->lock.key = 0; // memset(n, 0, sizeof *n) | |
| futexlock(&n->lock); | |
| } | |
| void | |
| notewakeup(Note *n) | |
| { | |
| futexunlock(&n->lock); | |
| } | |
| void | |
| notesleep(Note *n) | |
| { | |
| futexlock(&n->lock); | |
| futexunlock(&n->lock); // Let other sleepers find out too. | |
| } | |
| // Clone, the Linux rfork. | |
| enum | |
| { | |
| CLONE_VM = 0x100, | |
| CLONE_FS = 0x200, | |
| CLONE_FILES = 0x400, | |
| CLONE_SIGHAND = 0x800, | |
| CLONE_PTRACE = 0x2000, | |
| CLONE_VFORK = 0x4000, | |
| CLONE_PARENT = 0x8000, | |
| CLONE_THREAD = 0x10000, | |
| CLONE_NEWNS = 0x20000, | |
| CLONE_SYSVSEM = 0x40000, | |
| CLONE_SETTLS = 0x80000, | |
| CLONE_PARENT_SETTID = 0x100000, | |
| CLONE_CHILD_CLEARTID = 0x200000, | |
| CLONE_UNTRACED = 0x800000, | |
| CLONE_CHILD_SETTID = 0x1000000, | |
| CLONE_STOPPED = 0x2000000, | |
| CLONE_NEWUTS = 0x4000000, | |
| CLONE_NEWIPC = 0x8000000, | |
| }; | |
| void | |
| newosproc(M *m, G *g, void *stk, void (*fn)(void)) | |
| { | |
| int32 ret; | |
| int32 flags; | |
| /* | |
| * note: strace gets confused if we use CLONE_PTRACE here. | |
| */ | |
| flags = CLONE_PARENT /* getppid doesn't change in child */ | |
| | CLONE_VM /* share memory */ | |
| | CLONE_FS /* share cwd, etc */ | |
| | CLONE_FILES /* share fd table */ | |
| | CLONE_SIGHAND /* share sig handler table */ | |
| | CLONE_THREAD /* revisit - okay for now */ | |
| ; | |
| m->tls[0] = m->id; // so 386 asm can find it | |
| if(0){ | |
| printf("newosproc stk=%p m=%p g=%p fn=%p clone=%p id=%d/%d ostk=%p\n", | |
| stk, m, g, fn, clone, m->id, m->tls[0], &m); | |
| } | |
| ret = clone(flags, stk, m, g, fn); | |
| if(ret < 0) | |
| *(int32*)123 = 123; | |
| } | |
| void | |
| osinit(void) | |
| { | |
| } | |
| // Called to initialize a new m (including the bootstrap m). | |
| void | |
| minit(void) | |
| { | |
| // Initialize signal handling. | |
| m->gsignal = malg(32*1024); // OS X wants >=8K, Linux >=2K | |
| signalstack(m->gsignal->stackguard, 32*1024); | |
| } | |
| void | |
| sigpanic(void) | |
| { | |
| switch(g->sig) { | |
| case SIGBUS: | |
| if(g->sigcode0 == BUS_ADRERR && g->sigcode1 < 0x1000) | |
| panicstring("invalid memory address or nil pointer dereference"); | |
| printf("unexpected fault address %p\n", g->sigcode1); | |
| throw("fault"); | |
| case SIGSEGV: | |
| if((g->sigcode0 == 0 || g->sigcode0 == SEGV_MAPERR) && g->sigcode1 < 0x1000) | |
| panicstring("invalid memory address or nil pointer dereference"); | |
| printf("unexpected fault address %p\n", g->sigcode1); | |
| throw("fault"); | |
| case SIGFPE: | |
| switch(g->sigcode0) { | |
| case FPE_INTDIV: | |
| panicstring("integer divide by zero"); | |
| case FPE_INTOVF: | |
| panicstring("integer overflow"); | |
| } | |
| panicstring("floating point error"); | |
| } | |
| panicstring(sigtab[g->sig].name); | |
| } |