blob: 7626f69684127da7938ef9e4b80385eaba0e6a8f [file] [log] [blame]
// Copyright 2017 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
#include "go_asm.h"
#include "funcdata.h"
#include "textflag.h"
// func rt0_go()
TEXT runtime·rt0_go(SB),NOSPLIT|TOPFRAME,$0
// X2 = stack; A0 = argc; A1 = argv
ADD $-24, X2
MOV A0, 8(X2) // argc
MOV A1, 16(X2) // argv
// create istack out of the given (operating system) stack.
// _cgo_init may update stackguard.
MOV $runtime·g0(SB), g
MOV $(-64*1024), T0
ADD T0, X2, T1
MOV T1, g_stackguard0(g)
MOV T1, g_stackguard1(g)
MOV T1, (g_stack+stack_lo)(g)
MOV X2, (g_stack+stack_hi)(g)
// if there is a _cgo_init, call it using the gcc ABI.
MOV _cgo_init(SB), T0
BEQ T0, ZERO, nocgo
MOV ZERO, A3 // arg 3: not used
MOV ZERO, A2 // arg 2: not used
MOV $setg_gcc<>(SB), A1 // arg 1: setg
MOV g, A0 // arg 0: G
JALR RA, T0
nocgo:
// update stackguard after _cgo_init
MOV (g_stack+stack_lo)(g), T0
ADD $const__StackGuard, T0
MOV T0, g_stackguard0(g)
MOV T0, g_stackguard1(g)
// set the per-goroutine and per-mach "registers"
MOV $runtime·m0(SB), T0
// save m->g0 = g0
MOV g, m_g0(T0)
// save m0 to g0->m
MOV T0, g_m(g)
CALL runtime·check(SB)
// args are already prepared
CALL runtime·args(SB)
CALL runtime·osinit(SB)
CALL runtime·schedinit(SB)
// create a new goroutine to start program
MOV $runtime·mainPC(SB), T0 // entry
ADD $-16, X2
MOV T0, 8(X2)
MOV ZERO, 0(X2)
CALL runtime·newproc(SB)
ADD $16, X2
// start this M
CALL runtime·mstart(SB)
WORD $0 // crash if reached
RET
TEXT runtime·mstart(SB),NOSPLIT|TOPFRAME,$0
CALL runtime·mstart0(SB)
RET // not reached
// void setg_gcc(G*); set g called from gcc with g in A0
TEXT setg_gcc<>(SB),NOSPLIT,$0-0
MOV A0, g
CALL runtime·save_g(SB)
RET
// func cputicks() int64
TEXT runtime·cputicks(SB),NOSPLIT,$0-8
// RDTIME to emulate cpu ticks
// RDCYCLE reads counter that is per HART(core) based
// according to the riscv manual, see issue 46737
RDTIME A0
MOV A0, ret+0(FP)
RET
// systemstack_switch is a dummy routine that systemstack leaves at the bottom
// of the G stack. We need to distinguish the routine that
// lives at the bottom of the G stack from the one that lives
// at the top of the system stack because the one at the top of
// the system stack terminates the stack walk (see topofstack()).
TEXT runtime·systemstack_switch(SB), NOSPLIT, $0-0
UNDEF
JALR RA, ZERO // make sure this function is not leaf
RET
// func systemstack(fn func())
TEXT runtime·systemstack(SB), NOSPLIT, $0-8
MOV fn+0(FP), CTXT // CTXT = fn
MOV g_m(g), T0 // T0 = m
MOV m_gsignal(T0), T1 // T1 = gsignal
BEQ g, T1, noswitch
MOV m_g0(T0), T1 // T1 = g0
BEQ g, T1, noswitch
MOV m_curg(T0), T2
BEQ g, T2, switch
// Bad: g is not gsignal, not g0, not curg. What is it?
// Hide call from linker nosplit analysis.
MOV $runtime·badsystemstack(SB), T1
JALR RA, T1
switch:
// save our state in g->sched. Pretend to
// be systemstack_switch if the G stack is scanned.
CALL gosave_systemstack_switch<>(SB)
// switch to g0
MOV T1, g
CALL runtime·save_g(SB)
MOV (g_sched+gobuf_sp)(g), T0
MOV T0, X2
// call target function
MOV 0(CTXT), T1 // code pointer
JALR RA, T1
// switch back to g
MOV g_m(g), T0
MOV m_curg(T0), g
CALL runtime·save_g(SB)
MOV (g_sched+gobuf_sp)(g), X2
MOV ZERO, (g_sched+gobuf_sp)(g)
RET
noswitch:
// already on m stack, just call directly
// Using a tail call here cleans up tracebacks since we won't stop
// at an intermediate systemstack.
MOV 0(CTXT), T1 // code pointer
ADD $8, X2
JMP (T1)
TEXT runtime·getcallerpc(SB),NOSPLIT|NOFRAME,$0-8
MOV 0(X2), T0 // LR saved by caller
MOV T0, ret+0(FP)
RET
/*
* support for morestack
*/
// Called during function prolog when more stack is needed.
// Called with return address (i.e. caller's PC) in X5 (aka T0),
// and the LR register contains the caller's LR.
//
// The traceback routines see morestack on a g0 as being
// the top of a stack (for example, morestack calling newstack
// calling the scheduler calling newm calling gc), so we must
// record an argument size. For that purpose, it has no arguments.
// func morestack()
TEXT runtime·morestack(SB),NOSPLIT|NOFRAME,$0-0
// Cannot grow scheduler stack (m->g0).
MOV g_m(g), A0
MOV m_g0(A0), A1
BNE g, A1, 3(PC)
CALL runtime·badmorestackg0(SB)
CALL runtime·abort(SB)
// Cannot grow signal stack (m->gsignal).
MOV m_gsignal(A0), A1
BNE g, A1, 3(PC)
CALL runtime·badmorestackgsignal(SB)
CALL runtime·abort(SB)
// Called from f.
// Set g->sched to context in f.
MOV X2, (g_sched+gobuf_sp)(g)
MOV T0, (g_sched+gobuf_pc)(g)
MOV RA, (g_sched+gobuf_lr)(g)
MOV CTXT, (g_sched+gobuf_ctxt)(g)
// Called from f.
// Set m->morebuf to f's caller.
MOV RA, (m_morebuf+gobuf_pc)(A0) // f's caller's PC
MOV X2, (m_morebuf+gobuf_sp)(A0) // f's caller's SP
MOV g, (m_morebuf+gobuf_g)(A0)
// Call newstack on m->g0's stack.
MOV m_g0(A0), g
CALL runtime·save_g(SB)
MOV (g_sched+gobuf_sp)(g), X2
// Create a stack frame on g0 to call newstack.
MOV ZERO, -8(X2) // Zero saved LR in frame
ADD $-8, X2
CALL runtime·newstack(SB)
// Not reached, but make sure the return PC from the call to newstack
// is still in this function, and not the beginning of the next.
UNDEF
// func morestack_noctxt()
TEXT runtime·morestack_noctxt(SB),NOSPLIT|NOFRAME,$0-0
// Force SPWRITE. This function doesn't actually write SP,
// but it is called with a special calling convention where
// the caller doesn't save LR on stack but passes it as a
// register, and the unwinder currently doesn't understand.
// Make it SPWRITE to stop unwinding. (See issue 54332)
MOV X2, X2
MOV ZERO, CTXT
JMP runtime·morestack(SB)
// AES hashing not implemented for riscv64
TEXT runtime·memhash<ABIInternal>(SB),NOSPLIT|NOFRAME,$0-32
JMP runtime·memhashFallback<ABIInternal>(SB)
TEXT runtime·strhash<ABIInternal>(SB),NOSPLIT|NOFRAME,$0-24
JMP runtime·strhashFallback<ABIInternal>(SB)
TEXT runtime·memhash32<ABIInternal>(SB),NOSPLIT|NOFRAME,$0-24
JMP runtime·memhash32Fallback<ABIInternal>(SB)
TEXT runtime·memhash64<ABIInternal>(SB),NOSPLIT|NOFRAME,$0-24
JMP runtime·memhash64Fallback<ABIInternal>(SB)
// func return0()
TEXT runtime·return0(SB), NOSPLIT, $0
MOV $0, A0
RET
// restore state from Gobuf; longjmp
// func gogo(buf *gobuf)
TEXT runtime·gogo(SB), NOSPLIT|NOFRAME, $0-8
MOV buf+0(FP), T0
MOV gobuf_g(T0), T1
MOV 0(T1), ZERO // make sure g != nil
JMP gogo<>(SB)
TEXT gogo<>(SB), NOSPLIT|NOFRAME, $0
MOV T1, g
CALL runtime·save_g(SB)
MOV gobuf_sp(T0), X2
MOV gobuf_lr(T0), RA
MOV gobuf_ret(T0), A0
MOV gobuf_ctxt(T0), CTXT
MOV ZERO, gobuf_sp(T0)
MOV ZERO, gobuf_ret(T0)
MOV ZERO, gobuf_lr(T0)
MOV ZERO, gobuf_ctxt(T0)
MOV gobuf_pc(T0), T0
JALR ZERO, T0
// func procyield(cycles uint32)
TEXT runtime·procyield(SB),NOSPLIT,$0-0
RET
// Switch to m->g0's stack, call fn(g).
// Fn must never return. It should gogo(&g->sched)
// to keep running g.
// func mcall(fn func(*g))
TEXT runtime·mcall<ABIInternal>(SB), NOSPLIT|NOFRAME, $0-8
MOV X10, CTXT
// Save caller state in g->sched
MOV X2, (g_sched+gobuf_sp)(g)
MOV RA, (g_sched+gobuf_pc)(g)
MOV ZERO, (g_sched+gobuf_lr)(g)
// Switch to m->g0 & its stack, call fn.
MOV g, X10
MOV g_m(g), T1
MOV m_g0(T1), g
CALL runtime·save_g(SB)
BNE g, X10, 2(PC)
JMP runtime·badmcall(SB)
MOV 0(CTXT), T1 // code pointer
MOV (g_sched+gobuf_sp)(g), X2 // sp = m->g0->sched.sp
// we don't need special macro for regabi since arg0(X10) = g
ADD $-16, X2
MOV X10, 8(X2) // setup g
MOV ZERO, 0(X2) // clear return address
JALR RA, T1
JMP runtime·badmcall2(SB)
// Save state of caller into g->sched,
// but using fake PC from systemstack_switch.
// Must only be called from functions with no locals ($0)
// or else unwinding from systemstack_switch is incorrect.
// Smashes X31.
TEXT gosave_systemstack_switch<>(SB),NOSPLIT|NOFRAME,$0
MOV $runtime·systemstack_switch(SB), X31
ADD $8, X31 // get past prologue
MOV X31, (g_sched+gobuf_pc)(g)
MOV X2, (g_sched+gobuf_sp)(g)
MOV ZERO, (g_sched+gobuf_lr)(g)
MOV ZERO, (g_sched+gobuf_ret)(g)
// Assert ctxt is zero. See func save.
MOV (g_sched+gobuf_ctxt)(g), X31
BEQ ZERO, X31, 2(PC)
CALL runtime·abort(SB)
RET
// func asmcgocall(fn, arg unsafe.Pointer) int32
// Call fn(arg) on the scheduler stack,
// aligned appropriately for the gcc ABI.
// See cgocall.go for more details.
TEXT ·asmcgocall(SB),NOSPLIT,$0-20
MOV fn+0(FP), X5
MOV arg+8(FP), X10
MOV X2, X8 // save original stack pointer
MOV g, X9
// Figure out if we need to switch to m->g0 stack.
// We get called to create new OS threads too, and those
// come in on the m->g0 stack already. Or we might already
// be on the m->gsignal stack.
MOV g_m(g), X6
MOV m_gsignal(X6), X7
BEQ X7, g, g0
MOV m_g0(X6), X7
BEQ X7, g, g0
CALL gosave_systemstack_switch<>(SB)
MOV X7, g
CALL runtime·save_g(SB)
MOV (g_sched+gobuf_sp)(g), X2
// Now on a scheduling stack (a pthread-created stack).
g0:
// Save room for two of our pointers.
ADD $-16, X2
MOV X9, 0(X2) // save old g on stack
MOV (g_stack+stack_hi)(X9), X9
SUB X8, X9, X8
MOV X8, 8(X2) // save depth in old g stack (can't just save SP, as stack might be copied during a callback)
JALR RA, (X5)
// Restore g, stack pointer. X10 is return value.
MOV 0(X2), g
CALL runtime·save_g(SB)
MOV (g_stack+stack_hi)(g), X5
MOV 8(X2), X6
SUB X6, X5, X6
MOV X6, X2
MOVW X10, ret+16(FP)
RET
// func asminit()
TEXT runtime·asminit(SB),NOSPLIT|NOFRAME,$0-0
RET
// reflectcall: call a function with the given argument list
// func call(stackArgsType *_type, f *FuncVal, stackArgs *byte, stackArgsSize, stackRetOffset, frameSize uint32, regArgs *abi.RegArgs).
// we don't have variable-sized frames, so we use a small number
// of constant-sized-frame functions to encode a few bits of size in the pc.
// Caution: ugly multiline assembly macros in your future!
#define DISPATCH(NAME,MAXSIZE) \
MOV $MAXSIZE, T1 \
BLTU T1, T0, 3(PC) \
MOV $NAME(SB), T2; \
JALR ZERO, T2
// Note: can't just "BR NAME(SB)" - bad inlining results.
// func call(stackArgsType *rtype, fn, stackArgs unsafe.Pointer, stackArgsSize, stackRetOffset, frameSize uint32, regArgs *abi.RegArgs).
TEXT reflect·call(SB), NOSPLIT, $0-0
JMP ·reflectcall(SB)
// func call(stackArgsType *_type, fn, stackArgs unsafe.Pointer, stackArgsSize, stackRetOffset, frameSize uint32, regArgs *abi.RegArgs).
TEXT ·reflectcall(SB), NOSPLIT|NOFRAME, $0-48
MOVWU frameSize+32(FP), T0
DISPATCH(runtime·call16, 16)
DISPATCH(runtime·call32, 32)
DISPATCH(runtime·call64, 64)
DISPATCH(runtime·call128, 128)
DISPATCH(runtime·call256, 256)
DISPATCH(runtime·call512, 512)
DISPATCH(runtime·call1024, 1024)
DISPATCH(runtime·call2048, 2048)
DISPATCH(runtime·call4096, 4096)
DISPATCH(runtime·call8192, 8192)
DISPATCH(runtime·call16384, 16384)
DISPATCH(runtime·call32768, 32768)
DISPATCH(runtime·call65536, 65536)
DISPATCH(runtime·call131072, 131072)
DISPATCH(runtime·call262144, 262144)
DISPATCH(runtime·call524288, 524288)
DISPATCH(runtime·call1048576, 1048576)
DISPATCH(runtime·call2097152, 2097152)
DISPATCH(runtime·call4194304, 4194304)
DISPATCH(runtime·call8388608, 8388608)
DISPATCH(runtime·call16777216, 16777216)
DISPATCH(runtime·call33554432, 33554432)
DISPATCH(runtime·call67108864, 67108864)
DISPATCH(runtime·call134217728, 134217728)
DISPATCH(runtime·call268435456, 268435456)
DISPATCH(runtime·call536870912, 536870912)
DISPATCH(runtime·call1073741824, 1073741824)
MOV $runtime·badreflectcall(SB), T2
JALR ZERO, T2
#define CALLFN(NAME,MAXSIZE) \
TEXT NAME(SB), WRAPPER, $MAXSIZE-48; \
NO_LOCAL_POINTERS; \
/* copy arguments to stack */ \
MOV stackArgs+16(FP), A1; \
MOVWU stackArgsSize+24(FP), A2; \
MOV X2, A3; \
ADD $8, A3; \
ADD A3, A2; \
BEQ A3, A2, 6(PC); \
MOVBU (A1), A4; \
ADD $1, A1; \
MOVB A4, (A3); \
ADD $1, A3; \
JMP -5(PC); \
/* set up argument registers */ \
MOV regArgs+40(FP), X25; \
CALL ·unspillArgs(SB); \
/* call function */ \
MOV f+8(FP), CTXT; \
MOV (CTXT), X25; \
PCDATA $PCDATA_StackMapIndex, $0; \
JALR RA, X25; \
/* copy return values back */ \
MOV regArgs+40(FP), X25; \
CALL ·spillArgs(SB); \
MOV stackArgsType+0(FP), A5; \
MOV stackArgs+16(FP), A1; \
MOVWU stackArgsSize+24(FP), A2; \
MOVWU stackRetOffset+28(FP), A4; \
ADD $8, X2, A3; \
ADD A4, A3; \
ADD A4, A1; \
SUB A4, A2; \
CALL callRet<>(SB); \
RET
// callRet copies return values back at the end of call*. This is a
// separate function so it can allocate stack space for the arguments
// to reflectcallmove. It does not follow the Go ABI; it expects its
// arguments in registers.
TEXT callRet<>(SB), NOSPLIT, $40-0
NO_LOCAL_POINTERS
MOV A5, 8(X2)
MOV A1, 16(X2)
MOV A3, 24(X2)
MOV A2, 32(X2)
MOV X25, 40(X2)
CALL runtime·reflectcallmove(SB)
RET
CALLFN(·call16, 16)
CALLFN(·call32, 32)
CALLFN(·call64, 64)
CALLFN(·call128, 128)
CALLFN(·call256, 256)
CALLFN(·call512, 512)
CALLFN(·call1024, 1024)
CALLFN(·call2048, 2048)
CALLFN(·call4096, 4096)
CALLFN(·call8192, 8192)
CALLFN(·call16384, 16384)
CALLFN(·call32768, 32768)
CALLFN(·call65536, 65536)
CALLFN(·call131072, 131072)
CALLFN(·call262144, 262144)
CALLFN(·call524288, 524288)
CALLFN(·call1048576, 1048576)
CALLFN(·call2097152, 2097152)
CALLFN(·call4194304, 4194304)
CALLFN(·call8388608, 8388608)
CALLFN(·call16777216, 16777216)
CALLFN(·call33554432, 33554432)
CALLFN(·call67108864, 67108864)
CALLFN(·call134217728, 134217728)
CALLFN(·call268435456, 268435456)
CALLFN(·call536870912, 536870912)
CALLFN(·call1073741824, 1073741824)
// Called from cgo wrappers, this function returns g->m->curg.stack.hi.
// Must obey the gcc calling convention.
TEXT _cgo_topofstack(SB),NOSPLIT,$8
// g (X27) and REG_TMP (X31) might be clobbered by load_g.
// X27 is callee-save in the gcc calling convention, so save it.
MOV g, savedX27-8(SP)
CALL runtime·load_g(SB)
MOV g_m(g), X5
MOV m_curg(X5), X5
MOV (g_stack+stack_hi)(X5), X10 // return value in X10
MOV savedX27-8(SP), g
RET
// func goexit(neverCallThisFunction)
// The top-most function running on a goroutine
// returns to goexit+PCQuantum.
TEXT runtime·goexit(SB),NOSPLIT|NOFRAME|TOPFRAME,$0-0
MOV ZERO, ZERO // NOP
JMP runtime·goexit1(SB) // does not return
// traceback from goexit1 must hit code range of goexit
MOV ZERO, ZERO // NOP
// func cgocallback(fn, frame unsafe.Pointer, ctxt uintptr)
// See cgocall.go for more details.
TEXT ·cgocallback(SB),NOSPLIT,$24-24
NO_LOCAL_POINTERS
// Load m and g from thread-local storage.
MOVBU runtime·iscgo(SB), X5
BEQ ZERO, X5, nocgo
CALL runtime·load_g(SB)
nocgo:
// If g is nil, Go did not create the current thread.
// Call needm to obtain one for temporary use.
// In this case, we're running on the thread stack, so there's
// lots of space, but the linker doesn't know. Hide the call from
// the linker analysis by using an indirect call.
BEQ ZERO, g, needm
MOV g_m(g), X5
MOV X5, savedm-8(SP)
JMP havem
needm:
MOV g, savedm-8(SP) // g is zero, so is m.
MOV $runtime·needm(SB), X6
JALR RA, X6
// Set m->sched.sp = SP, so that if a panic happens
// during the function we are about to execute, it will
// have a valid SP to run on the g0 stack.
// The next few lines (after the havem label)
// will save this SP onto the stack and then write
// the same SP back to m->sched.sp. That seems redundant,
// but if an unrecovered panic happens, unwindm will
// restore the g->sched.sp from the stack location
// and then systemstack will try to use it. If we don't set it here,
// that restored SP will be uninitialized (typically 0) and
// will not be usable.
MOV g_m(g), X5
MOV m_g0(X5), X6
MOV X2, (g_sched+gobuf_sp)(X6)
havem:
// Now there's a valid m, and we're running on its m->g0.
// Save current m->g0->sched.sp on stack and then set it to SP.
// Save current sp in m->g0->sched.sp in preparation for
// switch back to m->curg stack.
// NOTE: unwindm knows that the saved g->sched.sp is at 8(X2) aka savedsp-24(SP).
MOV m_g0(X5), X6
MOV (g_sched+gobuf_sp)(X6), X7
MOV X7, savedsp-24(SP) // must match frame size
MOV X2, (g_sched+gobuf_sp)(X6)
// Switch to m->curg stack and call runtime.cgocallbackg.
// Because we are taking over the execution of m->curg
// but *not* resuming what had been running, we need to
// save that information (m->curg->sched) so we can restore it.
// We can restore m->curg->sched.sp easily, because calling
// runtime.cgocallbackg leaves SP unchanged upon return.
// To save m->curg->sched.pc, we push it onto the curg stack and
// open a frame the same size as cgocallback's g0 frame.
// Once we switch to the curg stack, the pushed PC will appear
// to be the return PC of cgocallback, so that the traceback
// will seamlessly trace back into the earlier calls.
MOV m_curg(X5), g
CALL runtime·save_g(SB)
MOV (g_sched+gobuf_sp)(g), X6 // prepare stack as X6
MOV (g_sched+gobuf_pc)(g), X7
MOV X7, -(24+8)(X6) // "saved LR"; must match frame size
// Gather our arguments into registers.
MOV fn+0(FP), X7
MOV frame+8(FP), X8
MOV ctxt+16(FP), X9
MOV $-(24+8)(X6), X2 // switch stack; must match frame size
MOV X7, 8(X2)
MOV X8, 16(X2)
MOV X9, 24(X2)
CALL runtime·cgocallbackg(SB)
// Restore g->sched (== m->curg->sched) from saved values.
MOV 0(X2), X7
MOV X7, (g_sched+gobuf_pc)(g)
MOV $(24+8)(X2), X6 // must match frame size
MOV X6, (g_sched+gobuf_sp)(g)
// Switch back to m->g0's stack and restore m->g0->sched.sp.
// (Unlike m->curg, the g0 goroutine never uses sched.pc,
// so we do not have to restore it.)
MOV g_m(g), X5
MOV m_g0(X5), g
CALL runtime·save_g(SB)
MOV (g_sched+gobuf_sp)(g), X2
MOV savedsp-24(SP), X6 // must match frame size
MOV X6, (g_sched+gobuf_sp)(g)
// If the m on entry was nil, we called needm above to borrow an m
// for the duration of the call. Since the call is over, return it with dropm.
MOV savedm-8(SP), X5
BNE ZERO, X5, droppedm
MOV $runtime·dropm(SB), X6
JALR RA, X6
droppedm:
// Done!
RET
TEXT runtime·breakpoint(SB),NOSPLIT|NOFRAME,$0-0
EBREAK
RET
TEXT runtime·abort(SB),NOSPLIT|NOFRAME,$0-0
EBREAK
RET
// void setg(G*); set g. for use by needm.
TEXT runtime·setg(SB), NOSPLIT, $0-8
MOV gg+0(FP), g
// This only happens if iscgo, so jump straight to save_g
CALL runtime·save_g(SB)
RET
TEXT ·checkASM(SB),NOSPLIT,$0-1
MOV $1, T0
MOV T0, ret+0(FP)
RET
// spillArgs stores return values from registers to a *internal/abi.RegArgs in X25.
TEXT ·spillArgs(SB),NOSPLIT,$0-0
MOV X10, (0*8)(X25)
MOV X11, (1*8)(X25)
MOV X12, (2*8)(X25)
MOV X13, (3*8)(X25)
MOV X14, (4*8)(X25)
MOV X15, (5*8)(X25)
MOV X16, (6*8)(X25)
MOV X17, (7*8)(X25)
MOV X8, (8*8)(X25)
MOV X9, (9*8)(X25)
MOV X18, (10*8)(X25)
MOV X19, (11*8)(X25)
MOV X20, (12*8)(X25)
MOV X21, (13*8)(X25)
MOV X22, (14*8)(X25)
MOV X23, (15*8)(X25)
MOVD F10, (16*8)(X25)
MOVD F11, (17*8)(X25)
MOVD F12, (18*8)(X25)
MOVD F13, (19*8)(X25)
MOVD F14, (20*8)(X25)
MOVD F15, (21*8)(X25)
MOVD F16, (22*8)(X25)
MOVD F17, (23*8)(X25)
MOVD F8, (24*8)(X25)
MOVD F9, (25*8)(X25)
MOVD F18, (26*8)(X25)
MOVD F19, (27*8)(X25)
MOVD F20, (28*8)(X25)
MOVD F21, (29*8)(X25)
MOVD F22, (30*8)(X25)
MOVD F23, (31*8)(X25)
RET
// unspillArgs loads args into registers from a *internal/abi.RegArgs in X25.
TEXT ·unspillArgs(SB),NOSPLIT,$0-0
MOV (0*8)(X25), X10
MOV (1*8)(X25), X11
MOV (2*8)(X25), X12
MOV (3*8)(X25), X13
MOV (4*8)(X25), X14
MOV (5*8)(X25), X15
MOV (6*8)(X25), X16
MOV (7*8)(X25), X17
MOV (8*8)(X25), X8
MOV (9*8)(X25), X9
MOV (10*8)(X25), X18
MOV (11*8)(X25), X19
MOV (12*8)(X25), X20
MOV (13*8)(X25), X21
MOV (14*8)(X25), X22
MOV (15*8)(X25), X23
MOVD (16*8)(X25), F10
MOVD (17*8)(X25), F11
MOVD (18*8)(X25), F12
MOVD (19*8)(X25), F13
MOVD (20*8)(X25), F14
MOVD (21*8)(X25), F15
MOVD (22*8)(X25), F16
MOVD (23*8)(X25), F17
MOVD (24*8)(X25), F8
MOVD (25*8)(X25), F9
MOVD (26*8)(X25), F18
MOVD (27*8)(X25), F19
MOVD (28*8)(X25), F20
MOVD (29*8)(X25), F21
MOVD (30*8)(X25), F22
MOVD (31*8)(X25), F23
RET
// gcWriteBarrier informs the GC about heap pointer writes.
//
// gcWriteBarrier does NOT follow the Go ABI. It accepts the
// number of bytes of buffer needed in X24, and returns a pointer
// to the buffer spcae in X24.
// It clobbers X31 aka T6 (the linker temp register - REG_TMP).
// The act of CALLing gcWriteBarrier will clobber RA (LR).
// It does not clobber any other general-purpose registers,
// but may clobber others (e.g., floating point registers).
TEXT gcWriteBarrier<>(SB),NOSPLIT,$208
// Save the registers clobbered by the fast path.
MOV A0, 24*8(X2)
MOV A1, 25*8(X2)
retry:
MOV g_m(g), A0
MOV m_p(A0), A0
MOV (p_wbBuf+wbBuf_next)(A0), A1
MOV (p_wbBuf+wbBuf_end)(A0), T6 // T6 is linker temp register (REG_TMP)
// Increment wbBuf.next position.
ADD X24, A1
// Is the buffer full?
BLTU T6, A1, flush
// Commit to the larger buffer.
MOV A1, (p_wbBuf+wbBuf_next)(A0)
// Make the return value (the original next position)
SUB X24, A1, X24
// Restore registers.
MOV 24*8(X2), A0
MOV 25*8(X2), A1
RET
flush:
// Save all general purpose registers since these could be
// clobbered by wbBufFlush and were not saved by the caller.
MOV T0, 1*8(X2)
MOV T1, 2*8(X2)
// X0 is zero register
// X1 is LR, saved by prologue
// X2 is SP
// X3 is GP
// X4 is TP
MOV X7, 3*8(X2)
MOV X8, 4*8(X2)
MOV X9, 5*8(X2)
// X10 already saved (A0)
// X11 already saved (A1)
MOV X12, 6*8(X2)
MOV X13, 7*8(X2)
MOV X14, 8*8(X2)
MOV X15, 9*8(X2)
MOV X16, 10*8(X2)
MOV X17, 11*8(X2)
MOV X18, 12*8(X2)
MOV X19, 13*8(X2)
MOV X20, 14*8(X2)
MOV X21, 15*8(X2)
MOV X22, 16*8(X2)
MOV X23, 17*8(X2)
MOV X24, 18*8(X2)
MOV X25, 19*8(X2)
MOV X26, 20*8(X2)
// X27 is g.
MOV X28, 21*8(X2)
MOV X29, 22*8(X2)
MOV X30, 23*8(X2)
// X31 is tmp register.
CALL runtime·wbBufFlush(SB)
MOV 1*8(X2), T0
MOV 2*8(X2), T1
MOV 3*8(X2), X7
MOV 4*8(X2), X8
MOV 5*8(X2), X9
MOV 6*8(X2), X12
MOV 7*8(X2), X13
MOV 8*8(X2), X14
MOV 9*8(X2), X15
MOV 10*8(X2), X16
MOV 11*8(X2), X17
MOV 12*8(X2), X18
MOV 13*8(X2), X19
MOV 14*8(X2), X20
MOV 15*8(X2), X21
MOV 16*8(X2), X22
MOV 17*8(X2), X23
MOV 18*8(X2), X24
MOV 19*8(X2), X25
MOV 20*8(X2), X26
MOV 21*8(X2), X28
MOV 22*8(X2), X29
MOV 23*8(X2), X30
JMP retry
TEXT runtime·gcWriteBarrier1<ABIInternal>(SB),NOSPLIT,$0
MOV $8, X24
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier2<ABIInternal>(SB),NOSPLIT,$0
MOV $16, X24
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier3<ABIInternal>(SB),NOSPLIT,$0
MOV $24, X24
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier4<ABIInternal>(SB),NOSPLIT,$0
MOV $32, X24
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier5<ABIInternal>(SB),NOSPLIT,$0
MOV $40, X24
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier6<ABIInternal>(SB),NOSPLIT,$0
MOV $48, X24
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier7<ABIInternal>(SB),NOSPLIT,$0
MOV $56, X24
JMP gcWriteBarrier<>(SB)
TEXT runtime·gcWriteBarrier8<ABIInternal>(SB),NOSPLIT,$0
MOV $64, X24
JMP gcWriteBarrier<>(SB)
// Note: these functions use a special calling convention to save generated code space.
// Arguments are passed in registers (ssa/gen/RISCV64Ops.go), but the space for those
// arguments are allocated in the caller's stack frame.
// These stubs write the args into that stack space and then tail call to the
// corresponding runtime handler.
// The tail call makes these stubs disappear in backtraces.
TEXT runtime·panicIndex<ABIInternal>(SB),NOSPLIT,$0-16
MOV T0, X10
MOV T1, X11
JMP runtime·goPanicIndex<ABIInternal>(SB)
TEXT runtime·panicIndexU<ABIInternal>(SB),NOSPLIT,$0-16
MOV T0, X10
MOV T1, X11
JMP runtime·goPanicIndexU<ABIInternal>(SB)
TEXT runtime·panicSliceAlen<ABIInternal>(SB),NOSPLIT,$0-16
MOV T1, X10
MOV T2, X11
JMP runtime·goPanicSliceAlen<ABIInternal>(SB)
TEXT runtime·panicSliceAlenU<ABIInternal>(SB),NOSPLIT,$0-16
MOV T1, X10
MOV T2, X11
JMP runtime·goPanicSliceAlenU<ABIInternal>(SB)
TEXT runtime·panicSliceAcap<ABIInternal>(SB),NOSPLIT,$0-16
MOV T1, X10
MOV T2, X11
JMP runtime·goPanicSliceAcap<ABIInternal>(SB)
TEXT runtime·panicSliceAcapU<ABIInternal>(SB),NOSPLIT,$0-16
MOV T1, X10
MOV T2, X11
JMP runtime·goPanicSliceAcapU<ABIInternal>(SB)
TEXT runtime·panicSliceB<ABIInternal>(SB),NOSPLIT,$0-16
MOV T0, X10
MOV T1, X11
JMP runtime·goPanicSliceB<ABIInternal>(SB)
TEXT runtime·panicSliceBU<ABIInternal>(SB),NOSPLIT,$0-16
MOV T0, X10
MOV T1, X11
JMP runtime·goPanicSliceBU<ABIInternal>(SB)
TEXT runtime·panicSlice3Alen<ABIInternal>(SB),NOSPLIT,$0-16
MOV T2, X10
MOV T3, X11
JMP runtime·goPanicSlice3Alen<ABIInternal>(SB)
TEXT runtime·panicSlice3AlenU<ABIInternal>(SB),NOSPLIT,$0-16
MOV T2, X10
MOV T3, X11
JMP runtime·goPanicSlice3AlenU<ABIInternal>(SB)
TEXT runtime·panicSlice3Acap<ABIInternal>(SB),NOSPLIT,$0-16
MOV T2, X10
MOV T3, X11
JMP runtime·goPanicSlice3Acap<ABIInternal>(SB)
TEXT runtime·panicSlice3AcapU<ABIInternal>(SB),NOSPLIT,$0-16
MOV T2, X10
MOV T3, X11
JMP runtime·goPanicSlice3AcapU<ABIInternal>(SB)
TEXT runtime·panicSlice3B<ABIInternal>(SB),NOSPLIT,$0-16
MOV T1, X10
MOV T2, X11
JMP runtime·goPanicSlice3B<ABIInternal>(SB)
TEXT runtime·panicSlice3BU<ABIInternal>(SB),NOSPLIT,$0-16
MOV T1, X10
MOV T2, X11
JMP runtime·goPanicSlice3BU<ABIInternal>(SB)
TEXT runtime·panicSlice3C<ABIInternal>(SB),NOSPLIT,$0-16
MOV T0, X10
MOV T1, X11
JMP runtime·goPanicSlice3C<ABIInternal>(SB)
TEXT runtime·panicSlice3CU<ABIInternal>(SB),NOSPLIT,$0-16
MOV T0, X10
MOV T1, X11
JMP runtime·goPanicSlice3CU<ABIInternal>(SB)
TEXT runtime·panicSliceConvert<ABIInternal>(SB),NOSPLIT,$0-16
MOV T2, X10
MOV T3, X11
JMP runtime·goPanicSliceConvert<ABIInternal>(SB)
DATA runtime·mainPC+0(SB)/8,$runtime·main<ABIInternal>(SB)
GLOBL runtime·mainPC(SB),RODATA,$8