| // Copyright 2012 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| //go:build unix |
| |
| package runtime |
| |
| import ( |
| "internal/abi" |
| "runtime/internal/atomic" |
| "runtime/internal/sys" |
| "unsafe" |
| ) |
| |
| // sigTabT is the type of an entry in the global sigtable array. |
| // sigtable is inherently system dependent, and appears in OS-specific files, |
| // but sigTabT is the same for all Unixy systems. |
| // The sigtable array is indexed by a system signal number to get the flags |
| // and printable name of each signal. |
| type sigTabT struct { |
| flags int32 |
| name string |
| } |
| |
| //go:linkname os_sigpipe os.sigpipe |
| func os_sigpipe() { |
| systemstack(sigpipe) |
| } |
| |
| func signame(sig uint32) string { |
| if sig >= uint32(len(sigtable)) { |
| return "" |
| } |
| return sigtable[sig].name |
| } |
| |
| const ( |
| _SIG_DFL uintptr = 0 |
| _SIG_IGN uintptr = 1 |
| ) |
| |
| // sigPreempt is the signal used for non-cooperative preemption. |
| // |
| // There's no good way to choose this signal, but there are some |
| // heuristics: |
| // |
| // 1. It should be a signal that's passed-through by debuggers by |
| // default. On Linux, this is SIGALRM, SIGURG, SIGCHLD, SIGIO, |
| // SIGVTALRM, SIGPROF, and SIGWINCH, plus some glibc-internal signals. |
| // |
| // 2. It shouldn't be used internally by libc in mixed Go/C binaries |
| // because libc may assume it's the only thing that can handle these |
| // signals. For example SIGCANCEL or SIGSETXID. |
| // |
| // 3. It should be a signal that can happen spuriously without |
| // consequences. For example, SIGALRM is a bad choice because the |
| // signal handler can't tell if it was caused by the real process |
| // alarm or not (arguably this means the signal is broken, but I |
| // digress). SIGUSR1 and SIGUSR2 are also bad because those are often |
| // used in meaningful ways by applications. |
| // |
| // 4. We need to deal with platforms without real-time signals (like |
| // macOS), so those are out. |
| // |
| // We use SIGURG because it meets all of these criteria, is extremely |
| // unlikely to be used by an application for its "real" meaning (both |
| // because out-of-band data is basically unused and because SIGURG |
| // doesn't report which socket has the condition, making it pretty |
| // useless), and even if it is, the application has to be ready for |
| // spurious SIGURG. SIGIO wouldn't be a bad choice either, but is more |
| // likely to be used for real. |
| const sigPreempt = _SIGURG |
| |
| // Stores the signal handlers registered before Go installed its own. |
| // These signal handlers will be invoked in cases where Go doesn't want to |
| // handle a particular signal (e.g., signal occurred on a non-Go thread). |
| // See sigfwdgo for more information on when the signals are forwarded. |
| // |
| // This is read by the signal handler; accesses should use |
| // atomic.Loaduintptr and atomic.Storeuintptr. |
| var fwdSig [_NSIG]uintptr |
| |
| // handlingSig is indexed by signal number and is non-zero if we are |
| // currently handling the signal. Or, to put it another way, whether |
| // the signal handler is currently set to the Go signal handler or not. |
| // This is uint32 rather than bool so that we can use atomic instructions. |
| var handlingSig [_NSIG]uint32 |
| |
| // channels for synchronizing signal mask updates with the signal mask |
| // thread |
| var ( |
| disableSigChan chan uint32 |
| enableSigChan chan uint32 |
| maskUpdatedChan chan struct{} |
| ) |
| |
| func init() { |
| // _NSIG is the number of signals on this operating system. |
| // sigtable should describe what to do for all the possible signals. |
| if len(sigtable) != _NSIG { |
| print("runtime: len(sigtable)=", len(sigtable), " _NSIG=", _NSIG, "\n") |
| throw("bad sigtable len") |
| } |
| } |
| |
| var signalsOK bool |
| |
| // Initialize signals. |
| // Called by libpreinit so runtime may not be initialized. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func initsig(preinit bool) { |
| if !preinit { |
| // It's now OK for signal handlers to run. |
| signalsOK = true |
| } |
| |
| // For c-archive/c-shared this is called by libpreinit with |
| // preinit == true. |
| if (isarchive || islibrary) && !preinit { |
| return |
| } |
| |
| for i := uint32(0); i < _NSIG; i++ { |
| t := &sigtable[i] |
| if t.flags == 0 || t.flags&_SigDefault != 0 { |
| continue |
| } |
| |
| // We don't need to use atomic operations here because |
| // there shouldn't be any other goroutines running yet. |
| fwdSig[i] = getsig(i) |
| |
| if !sigInstallGoHandler(i) { |
| // Even if we are not installing a signal handler, |
| // set SA_ONSTACK if necessary. |
| if fwdSig[i] != _SIG_DFL && fwdSig[i] != _SIG_IGN { |
| setsigstack(i) |
| } else if fwdSig[i] == _SIG_IGN { |
| sigInitIgnored(i) |
| } |
| continue |
| } |
| |
| handlingSig[i] = 1 |
| setsig(i, abi.FuncPCABIInternal(sighandler)) |
| } |
| } |
| |
| //go:nosplit |
| //go:nowritebarrierrec |
| func sigInstallGoHandler(sig uint32) bool { |
| // For some signals, we respect an inherited SIG_IGN handler |
| // rather than insist on installing our own default handler. |
| // Even these signals can be fetched using the os/signal package. |
| switch sig { |
| case _SIGHUP, _SIGINT: |
| if atomic.Loaduintptr(&fwdSig[sig]) == _SIG_IGN { |
| return false |
| } |
| } |
| |
| if (GOOS == "linux" || GOOS == "android") && !iscgo && sig == sigPerThreadSyscall { |
| // sigPerThreadSyscall is the same signal used by glibc for |
| // per-thread syscalls on Linux. We use it for the same purpose |
| // in non-cgo binaries. |
| return true |
| } |
| |
| t := &sigtable[sig] |
| if t.flags&_SigSetStack != 0 { |
| return false |
| } |
| |
| // When built using c-archive or c-shared, only install signal |
| // handlers for synchronous signals and SIGPIPE and sigPreempt. |
| if (isarchive || islibrary) && t.flags&_SigPanic == 0 && sig != _SIGPIPE && sig != sigPreempt { |
| return false |
| } |
| |
| return true |
| } |
| |
| // sigenable enables the Go signal handler to catch the signal sig. |
| // It is only called while holding the os/signal.handlers lock, |
| // via os/signal.enableSignal and signal_enable. |
| func sigenable(sig uint32) { |
| if sig >= uint32(len(sigtable)) { |
| return |
| } |
| |
| // SIGPROF is handled specially for profiling. |
| if sig == _SIGPROF { |
| return |
| } |
| |
| t := &sigtable[sig] |
| if t.flags&_SigNotify != 0 { |
| ensureSigM() |
| enableSigChan <- sig |
| <-maskUpdatedChan |
| if atomic.Cas(&handlingSig[sig], 0, 1) { |
| atomic.Storeuintptr(&fwdSig[sig], getsig(sig)) |
| setsig(sig, abi.FuncPCABIInternal(sighandler)) |
| } |
| } |
| } |
| |
| // sigdisable disables the Go signal handler for the signal sig. |
| // It is only called while holding the os/signal.handlers lock, |
| // via os/signal.disableSignal and signal_disable. |
| func sigdisable(sig uint32) { |
| if sig >= uint32(len(sigtable)) { |
| return |
| } |
| |
| // SIGPROF is handled specially for profiling. |
| if sig == _SIGPROF { |
| return |
| } |
| |
| t := &sigtable[sig] |
| if t.flags&_SigNotify != 0 { |
| ensureSigM() |
| disableSigChan <- sig |
| <-maskUpdatedChan |
| |
| // If initsig does not install a signal handler for a |
| // signal, then to go back to the state before Notify |
| // we should remove the one we installed. |
| if !sigInstallGoHandler(sig) { |
| atomic.Store(&handlingSig[sig], 0) |
| setsig(sig, atomic.Loaduintptr(&fwdSig[sig])) |
| } |
| } |
| } |
| |
| // sigignore ignores the signal sig. |
| // It is only called while holding the os/signal.handlers lock, |
| // via os/signal.ignoreSignal and signal_ignore. |
| func sigignore(sig uint32) { |
| if sig >= uint32(len(sigtable)) { |
| return |
| } |
| |
| // SIGPROF is handled specially for profiling. |
| if sig == _SIGPROF { |
| return |
| } |
| |
| t := &sigtable[sig] |
| if t.flags&_SigNotify != 0 { |
| atomic.Store(&handlingSig[sig], 0) |
| setsig(sig, _SIG_IGN) |
| } |
| } |
| |
| // clearSignalHandlers clears all signal handlers that are not ignored |
| // back to the default. This is called by the child after a fork, so that |
| // we can enable the signal mask for the exec without worrying about |
| // running a signal handler in the child. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func clearSignalHandlers() { |
| for i := uint32(0); i < _NSIG; i++ { |
| if atomic.Load(&handlingSig[i]) != 0 { |
| setsig(i, _SIG_DFL) |
| } |
| } |
| } |
| |
| // setProcessCPUProfilerTimer is called when the profiling timer changes. |
| // It is called with prof.signalLock held. hz is the new timer, and is 0 if |
| // profiling is being disabled. Enable or disable the signal as |
| // required for -buildmode=c-archive. |
| func setProcessCPUProfilerTimer(hz int32) { |
| if hz != 0 { |
| // Enable the Go signal handler if not enabled. |
| if atomic.Cas(&handlingSig[_SIGPROF], 0, 1) { |
| h := getsig(_SIGPROF) |
| // If no signal handler was installed before, then we record |
| // _SIG_IGN here. When we turn off profiling (below) we'll start |
| // ignoring SIGPROF signals. We do this, rather than change |
| // to SIG_DFL, because there may be a pending SIGPROF |
| // signal that has not yet been delivered to some other thread. |
| // If we change to SIG_DFL when turning off profiling, the |
| // program will crash when that SIGPROF is delivered. We assume |
| // that programs that use profiling don't want to crash on a |
| // stray SIGPROF. See issue 19320. |
| // We do the change here instead of when turning off profiling, |
| // because there we may race with a signal handler running |
| // concurrently, in particular, sigfwdgo may observe _SIG_DFL and |
| // die. See issue 43828. |
| if h == _SIG_DFL { |
| h = _SIG_IGN |
| } |
| atomic.Storeuintptr(&fwdSig[_SIGPROF], h) |
| setsig(_SIGPROF, abi.FuncPCABIInternal(sighandler)) |
| } |
| |
| var it itimerval |
| it.it_interval.tv_sec = 0 |
| it.it_interval.set_usec(1000000 / hz) |
| it.it_value = it.it_interval |
| setitimer(_ITIMER_PROF, &it, nil) |
| } else { |
| setitimer(_ITIMER_PROF, &itimerval{}, nil) |
| |
| // If the Go signal handler should be disabled by default, |
| // switch back to the signal handler that was installed |
| // when we enabled profiling. We don't try to handle the case |
| // of a program that changes the SIGPROF handler while Go |
| // profiling is enabled. |
| if !sigInstallGoHandler(_SIGPROF) { |
| if atomic.Cas(&handlingSig[_SIGPROF], 1, 0) { |
| h := atomic.Loaduintptr(&fwdSig[_SIGPROF]) |
| setsig(_SIGPROF, h) |
| } |
| } |
| } |
| } |
| |
| // setThreadCPUProfilerHz makes any thread-specific changes required to |
| // implement profiling at a rate of hz. |
| // No changes required on Unix systems when using setitimer. |
| func setThreadCPUProfilerHz(hz int32) { |
| getg().m.profilehz = hz |
| } |
| |
| func sigpipe() { |
| if signal_ignored(_SIGPIPE) || sigsend(_SIGPIPE) { |
| return |
| } |
| dieFromSignal(_SIGPIPE) |
| } |
| |
| // doSigPreempt handles a preemption signal on gp. |
| func doSigPreempt(gp *g, ctxt *sigctxt) { |
| // Check if this G wants to be preempted and is safe to |
| // preempt. |
| if wantAsyncPreempt(gp) { |
| if ok, newpc := isAsyncSafePoint(gp, ctxt.sigpc(), ctxt.sigsp(), ctxt.siglr()); ok { |
| // Adjust the PC and inject a call to asyncPreempt. |
| ctxt.pushCall(abi.FuncPCABI0(asyncPreempt), newpc) |
| } |
| } |
| |
| // Acknowledge the preemption. |
| atomic.Xadd(&gp.m.preemptGen, 1) |
| atomic.Store(&gp.m.signalPending, 0) |
| |
| if GOOS == "darwin" || GOOS == "ios" { |
| atomic.Xadd(&pendingPreemptSignals, -1) |
| } |
| } |
| |
| const preemptMSupported = true |
| |
| // preemptM sends a preemption request to mp. This request may be |
| // handled asynchronously and may be coalesced with other requests to |
| // the M. When the request is received, if the running G or P are |
| // marked for preemption and the goroutine is at an asynchronous |
| // safe-point, it will preempt the goroutine. It always atomically |
| // increments mp.preemptGen after handling a preemption request. |
| func preemptM(mp *m) { |
| // On Darwin, don't try to preempt threads during exec. |
| // Issue #41702. |
| if GOOS == "darwin" || GOOS == "ios" { |
| execLock.rlock() |
| } |
| |
| if atomic.Cas(&mp.signalPending, 0, 1) { |
| if GOOS == "darwin" || GOOS == "ios" { |
| atomic.Xadd(&pendingPreemptSignals, 1) |
| } |
| |
| // If multiple threads are preempting the same M, it may send many |
| // signals to the same M such that it hardly make progress, causing |
| // live-lock problem. Apparently this could happen on darwin. See |
| // issue #37741. |
| // Only send a signal if there isn't already one pending. |
| signalM(mp, sigPreempt) |
| } |
| |
| if GOOS == "darwin" || GOOS == "ios" { |
| execLock.runlock() |
| } |
| } |
| |
| // sigFetchG fetches the value of G safely when running in a signal handler. |
| // On some architectures, the g value may be clobbered when running in a VDSO. |
| // See issue #32912. |
| // |
| //go:nosplit |
| func sigFetchG(c *sigctxt) *g { |
| switch GOARCH { |
| case "arm", "arm64", "ppc64", "ppc64le", "riscv64", "s390x": |
| if !iscgo && inVDSOPage(c.sigpc()) { |
| // When using cgo, we save the g on TLS and load it from there |
| // in sigtramp. Just use that. |
| // Otherwise, before making a VDSO call we save the g to the |
| // bottom of the signal stack. Fetch from there. |
| // TODO: in efence mode, stack is sysAlloc'd, so this wouldn't |
| // work. |
| sp := getcallersp() |
| s := spanOf(sp) |
| if s != nil && s.state.get() == mSpanManual && s.base() < sp && sp < s.limit { |
| gp := *(**g)(unsafe.Pointer(s.base())) |
| return gp |
| } |
| return nil |
| } |
| } |
| return getg() |
| } |
| |
| // sigtrampgo is called from the signal handler function, sigtramp, |
| // written in assembly code. |
| // This is called by the signal handler, and the world may be stopped. |
| // |
| // It must be nosplit because getg() is still the G that was running |
| // (if any) when the signal was delivered, but it's (usually) called |
| // on the gsignal stack. Until this switches the G to gsignal, the |
| // stack bounds check won't work. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func sigtrampgo(sig uint32, info *siginfo, ctx unsafe.Pointer) { |
| if sigfwdgo(sig, info, ctx) { |
| return |
| } |
| c := &sigctxt{info, ctx} |
| g := sigFetchG(c) |
| setg(g) |
| if g == nil { |
| if sig == _SIGPROF { |
| // Some platforms (Linux) have per-thread timers, which we use in |
| // combination with the process-wide timer. Avoid double-counting. |
| if validSIGPROF(nil, c) { |
| sigprofNonGoPC(c.sigpc()) |
| } |
| return |
| } |
| if sig == sigPreempt && preemptMSupported && debug.asyncpreemptoff == 0 { |
| // This is probably a signal from preemptM sent |
| // while executing Go code but received while |
| // executing non-Go code. |
| // We got past sigfwdgo, so we know that there is |
| // no non-Go signal handler for sigPreempt. |
| // The default behavior for sigPreempt is to ignore |
| // the signal, so badsignal will be a no-op anyway. |
| if GOOS == "darwin" || GOOS == "ios" { |
| atomic.Xadd(&pendingPreemptSignals, -1) |
| } |
| return |
| } |
| c.fixsigcode(sig) |
| badsignal(uintptr(sig), c) |
| return |
| } |
| |
| setg(g.m.gsignal) |
| |
| // If some non-Go code called sigaltstack, adjust. |
| var gsignalStack gsignalStack |
| setStack := adjustSignalStack(sig, g.m, &gsignalStack) |
| if setStack { |
| g.m.gsignal.stktopsp = getcallersp() |
| } |
| |
| if g.stackguard0 == stackFork { |
| signalDuringFork(sig) |
| } |
| |
| c.fixsigcode(sig) |
| sighandler(sig, info, ctx, g) |
| setg(g) |
| if setStack { |
| restoreGsignalStack(&gsignalStack) |
| } |
| } |
| |
| // If the signal handler receives a SIGPROF signal on a non-Go thread, |
| // it tries to collect a traceback into sigprofCallers. |
| // sigprofCallersUse is set to non-zero while sigprofCallers holds a traceback. |
| var sigprofCallers cgoCallers |
| var sigprofCallersUse uint32 |
| |
| // sigprofNonGo is called if we receive a SIGPROF signal on a non-Go thread, |
| // and the signal handler collected a stack trace in sigprofCallers. |
| // When this is called, sigprofCallersUse will be non-zero. |
| // g is nil, and what we can do is very limited. |
| // |
| // It is called from the signal handling functions written in assembly code that |
| // are active for cgo programs, cgoSigtramp and sigprofNonGoWrapper, which have |
| // not verified that the SIGPROF delivery corresponds to the best available |
| // profiling source for this thread. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func sigprofNonGo(sig uint32, info *siginfo, ctx unsafe.Pointer) { |
| if prof.hz != 0 { |
| c := &sigctxt{info, ctx} |
| // Some platforms (Linux) have per-thread timers, which we use in |
| // combination with the process-wide timer. Avoid double-counting. |
| if validSIGPROF(nil, c) { |
| n := 0 |
| for n < len(sigprofCallers) && sigprofCallers[n] != 0 { |
| n++ |
| } |
| cpuprof.addNonGo(sigprofCallers[:n]) |
| } |
| } |
| |
| atomic.Store(&sigprofCallersUse, 0) |
| } |
| |
| // sigprofNonGoPC is called when a profiling signal arrived on a |
| // non-Go thread and we have a single PC value, not a stack trace. |
| // g is nil, and what we can do is very limited. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func sigprofNonGoPC(pc uintptr) { |
| if prof.hz != 0 { |
| stk := []uintptr{ |
| pc, |
| abi.FuncPCABIInternal(_ExternalCode) + sys.PCQuantum, |
| } |
| cpuprof.addNonGo(stk) |
| } |
| } |
| |
| // adjustSignalStack adjusts the current stack guard based on the |
| // stack pointer that is actually in use while handling a signal. |
| // We do this in case some non-Go code called sigaltstack. |
| // This reports whether the stack was adjusted, and if so stores the old |
| // signal stack in *gsigstack. |
| // |
| //go:nosplit |
| func adjustSignalStack(sig uint32, mp *m, gsigStack *gsignalStack) bool { |
| sp := uintptr(unsafe.Pointer(&sig)) |
| if sp >= mp.gsignal.stack.lo && sp < mp.gsignal.stack.hi { |
| return false |
| } |
| |
| var st stackt |
| sigaltstack(nil, &st) |
| stsp := uintptr(unsafe.Pointer(st.ss_sp)) |
| if st.ss_flags&_SS_DISABLE == 0 && sp >= stsp && sp < stsp+st.ss_size { |
| setGsignalStack(&st, gsigStack) |
| return true |
| } |
| |
| if sp >= mp.g0.stack.lo && sp < mp.g0.stack.hi { |
| // The signal was delivered on the g0 stack. |
| // This can happen when linked with C code |
| // using the thread sanitizer, which collects |
| // signals then delivers them itself by calling |
| // the signal handler directly when C code, |
| // including C code called via cgo, calls a |
| // TSAN-intercepted function such as malloc. |
| // |
| // We check this condition last as g0.stack.lo |
| // may be not very accurate (see mstart). |
| st := stackt{ss_size: mp.g0.stack.hi - mp.g0.stack.lo} |
| setSignalstackSP(&st, mp.g0.stack.lo) |
| setGsignalStack(&st, gsigStack) |
| return true |
| } |
| |
| // sp is not within gsignal stack, g0 stack, or sigaltstack. Bad. |
| setg(nil) |
| needm() |
| if st.ss_flags&_SS_DISABLE != 0 { |
| noSignalStack(sig) |
| } else { |
| sigNotOnStack(sig) |
| } |
| dropm() |
| return false |
| } |
| |
| // crashing is the number of m's we have waited for when implementing |
| // GOTRACEBACK=crash when a signal is received. |
| var crashing int32 |
| |
| // testSigtrap and testSigusr1 are used by the runtime tests. If |
| // non-nil, it is called on SIGTRAP/SIGUSR1. If it returns true, the |
| // normal behavior on this signal is suppressed. |
| var testSigtrap func(info *siginfo, ctxt *sigctxt, gp *g) bool |
| var testSigusr1 func(gp *g) bool |
| |
| // sighandler is invoked when a signal occurs. The global g will be |
| // set to a gsignal goroutine and we will be running on the alternate |
| // signal stack. The parameter g will be the value of the global g |
| // when the signal occurred. The sig, info, and ctxt parameters are |
| // from the system signal handler: they are the parameters passed when |
| // the SA is passed to the sigaction system call. |
| // |
| // The garbage collector may have stopped the world, so write barriers |
| // are not allowed. |
| // |
| //go:nowritebarrierrec |
| func sighandler(sig uint32, info *siginfo, ctxt unsafe.Pointer, gp *g) { |
| _g_ := getg() |
| c := &sigctxt{info, ctxt} |
| mp := _g_.m |
| |
| // Cgo TSAN (not the Go race detector) intercepts signals and calls the |
| // signal handler at a later time. When the signal handler is called, the |
| // memory may have changed, but the signal context remains old. The |
| // unmatched signal context and memory makes it unsafe to unwind or inspect |
| // the stack. So we ignore delayed non-fatal signals that will cause a stack |
| // inspection (profiling signal and preemption signal). |
| // cgo_yield is only non-nil for TSAN, and is specifically used to trigger |
| // signal delivery. We use that as an indicator of delayed signals. |
| // For delayed signals, the handler is called on the g0 stack (see |
| // adjustSignalStack). |
| delayedSignal := *cgo_yield != nil && mp != nil && _g_.stack == mp.g0.stack |
| |
| if sig == _SIGPROF { |
| // Some platforms (Linux) have per-thread timers, which we use in |
| // combination with the process-wide timer. Avoid double-counting. |
| if !delayedSignal && validSIGPROF(mp, c) { |
| sigprof(c.sigpc(), c.sigsp(), c.siglr(), gp, mp) |
| } |
| return |
| } |
| |
| if sig == _SIGTRAP && testSigtrap != nil && testSigtrap(info, (*sigctxt)(noescape(unsafe.Pointer(c))), gp) { |
| return |
| } |
| |
| if sig == _SIGUSR1 && testSigusr1 != nil && testSigusr1(gp) { |
| return |
| } |
| |
| if (GOOS == "linux" || GOOS == "android") && sig == sigPerThreadSyscall { |
| // sigPerThreadSyscall is the same signal used by glibc for |
| // per-thread syscalls on Linux. We use it for the same purpose |
| // in non-cgo binaries. Since this signal is not _SigNotify, |
| // there is nothing more to do once we run the syscall. |
| runPerThreadSyscall() |
| return |
| } |
| |
| if sig == sigPreempt && debug.asyncpreemptoff == 0 && !delayedSignal { |
| // Might be a preemption signal. |
| doSigPreempt(gp, c) |
| // Even if this was definitely a preemption signal, it |
| // may have been coalesced with another signal, so we |
| // still let it through to the application. |
| } |
| |
| flags := int32(_SigThrow) |
| if sig < uint32(len(sigtable)) { |
| flags = sigtable[sig].flags |
| } |
| if c.sigcode() != _SI_USER && flags&_SigPanic != 0 && gp.throwsplit { |
| // We can't safely sigpanic because it may grow the |
| // stack. Abort in the signal handler instead. |
| flags = _SigThrow |
| } |
| if isAbortPC(c.sigpc()) { |
| // On many architectures, the abort function just |
| // causes a memory fault. Don't turn that into a panic. |
| flags = _SigThrow |
| } |
| if c.sigcode() != _SI_USER && flags&_SigPanic != 0 { |
| // The signal is going to cause a panic. |
| // Arrange the stack so that it looks like the point |
| // where the signal occurred made a call to the |
| // function sigpanic. Then set the PC to sigpanic. |
| |
| // Have to pass arguments out of band since |
| // augmenting the stack frame would break |
| // the unwinding code. |
| gp.sig = sig |
| gp.sigcode0 = uintptr(c.sigcode()) |
| gp.sigcode1 = uintptr(c.fault()) |
| gp.sigpc = c.sigpc() |
| |
| c.preparePanic(sig, gp) |
| return |
| } |
| |
| if c.sigcode() == _SI_USER || flags&_SigNotify != 0 { |
| if sigsend(sig) { |
| return |
| } |
| } |
| |
| if c.sigcode() == _SI_USER && signal_ignored(sig) { |
| return |
| } |
| |
| if flags&_SigKill != 0 { |
| dieFromSignal(sig) |
| } |
| |
| // _SigThrow means that we should exit now. |
| // If we get here with _SigPanic, it means that the signal |
| // was sent to us by a program (c.sigcode() == _SI_USER); |
| // in that case, if we didn't handle it in sigsend, we exit now. |
| if flags&(_SigThrow|_SigPanic) == 0 { |
| return |
| } |
| |
| _g_.m.throwing = throwTypeRuntime |
| _g_.m.caughtsig.set(gp) |
| |
| if crashing == 0 { |
| startpanic_m() |
| } |
| |
| if sig < uint32(len(sigtable)) { |
| print(sigtable[sig].name, "\n") |
| } else { |
| print("Signal ", sig, "\n") |
| } |
| |
| print("PC=", hex(c.sigpc()), " m=", _g_.m.id, " sigcode=", c.sigcode(), "\n") |
| if _g_.m.incgo && gp == _g_.m.g0 && _g_.m.curg != nil { |
| print("signal arrived during cgo execution\n") |
| // Switch to curg so that we get a traceback of the Go code |
| // leading up to the cgocall, which switched from curg to g0. |
| gp = _g_.m.curg |
| } |
| if sig == _SIGILL || sig == _SIGFPE { |
| // It would be nice to know how long the instruction is. |
| // Unfortunately, that's complicated to do in general (mostly for x86 |
| // and s930x, but other archs have non-standard instruction lengths also). |
| // Opt to print 16 bytes, which covers most instructions. |
| const maxN = 16 |
| n := uintptr(maxN) |
| // We have to be careful, though. If we're near the end of |
| // a page and the following page isn't mapped, we could |
| // segfault. So make sure we don't straddle a page (even though |
| // that could lead to printing an incomplete instruction). |
| // We're assuming here we can read at least the page containing the PC. |
| // I suppose it is possible that the page is mapped executable but not readable? |
| pc := c.sigpc() |
| if n > physPageSize-pc%physPageSize { |
| n = physPageSize - pc%physPageSize |
| } |
| print("instruction bytes:") |
| b := (*[maxN]byte)(unsafe.Pointer(pc)) |
| for i := uintptr(0); i < n; i++ { |
| print(" ", hex(b[i])) |
| } |
| println() |
| } |
| print("\n") |
| |
| level, _, docrash := gotraceback() |
| if level > 0 { |
| goroutineheader(gp) |
| tracebacktrap(c.sigpc(), c.sigsp(), c.siglr(), gp) |
| if crashing > 0 && gp != _g_.m.curg && _g_.m.curg != nil && readgstatus(_g_.m.curg)&^_Gscan == _Grunning { |
| // tracebackothers on original m skipped this one; trace it now. |
| goroutineheader(_g_.m.curg) |
| traceback(^uintptr(0), ^uintptr(0), 0, _g_.m.curg) |
| } else if crashing == 0 { |
| tracebackothers(gp) |
| print("\n") |
| } |
| dumpregs(c) |
| } |
| |
| if docrash { |
| crashing++ |
| if crashing < mcount()-int32(extraMCount) { |
| // There are other m's that need to dump their stacks. |
| // Relay SIGQUIT to the next m by sending it to the current process. |
| // All m's that have already received SIGQUIT have signal masks blocking |
| // receipt of any signals, so the SIGQUIT will go to an m that hasn't seen it yet. |
| // When the last m receives the SIGQUIT, it will fall through to the call to |
| // crash below. Just in case the relaying gets botched, each m involved in |
| // the relay sleeps for 5 seconds and then does the crash/exit itself. |
| // In expected operation, the last m has received the SIGQUIT and run |
| // crash/exit and the process is gone, all long before any of the |
| // 5-second sleeps have finished. |
| print("\n-----\n\n") |
| raiseproc(_SIGQUIT) |
| usleep(5 * 1000 * 1000) |
| } |
| crash() |
| } |
| |
| printDebugLog() |
| |
| exit(2) |
| } |
| |
| // sigpanic turns a synchronous signal into a run-time panic. |
| // If the signal handler sees a synchronous panic, it arranges the |
| // stack to look like the function where the signal occurred called |
| // sigpanic, sets the signal's PC value to sigpanic, and returns from |
| // the signal handler. The effect is that the program will act as |
| // though the function that got the signal simply called sigpanic |
| // instead. |
| // |
| // This must NOT be nosplit because the linker doesn't know where |
| // sigpanic calls can be injected. |
| // |
| // The signal handler must not inject a call to sigpanic if |
| // getg().throwsplit, since sigpanic may need to grow the stack. |
| // |
| // This is exported via linkname to assembly in runtime/cgo. |
| // |
| //go:linkname sigpanic |
| func sigpanic() { |
| g := getg() |
| if !canpanic(g) { |
| throw("unexpected signal during runtime execution") |
| } |
| |
| switch g.sig { |
| case _SIGBUS: |
| if g.sigcode0 == _BUS_ADRERR && g.sigcode1 < 0x1000 { |
| panicmem() |
| } |
| // Support runtime/debug.SetPanicOnFault. |
| if g.paniconfault { |
| panicmemAddr(g.sigcode1) |
| } |
| print("unexpected fault address ", hex(g.sigcode1), "\n") |
| throw("fault") |
| case _SIGSEGV: |
| if (g.sigcode0 == 0 || g.sigcode0 == _SEGV_MAPERR || g.sigcode0 == _SEGV_ACCERR) && g.sigcode1 < 0x1000 { |
| panicmem() |
| } |
| // Support runtime/debug.SetPanicOnFault. |
| if g.paniconfault { |
| panicmemAddr(g.sigcode1) |
| } |
| print("unexpected fault address ", hex(g.sigcode1), "\n") |
| throw("fault") |
| case _SIGFPE: |
| switch g.sigcode0 { |
| case _FPE_INTDIV: |
| panicdivide() |
| case _FPE_INTOVF: |
| panicoverflow() |
| } |
| panicfloat() |
| } |
| |
| if g.sig >= uint32(len(sigtable)) { |
| // can't happen: we looked up g.sig in sigtable to decide to call sigpanic |
| throw("unexpected signal value") |
| } |
| panic(errorString(sigtable[g.sig].name)) |
| } |
| |
| // dieFromSignal kills the program with a signal. |
| // This provides the expected exit status for the shell. |
| // This is only called with fatal signals expected to kill the process. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func dieFromSignal(sig uint32) { |
| unblocksig(sig) |
| // Mark the signal as unhandled to ensure it is forwarded. |
| atomic.Store(&handlingSig[sig], 0) |
| raise(sig) |
| |
| // That should have killed us. On some systems, though, raise |
| // sends the signal to the whole process rather than to just |
| // the current thread, which means that the signal may not yet |
| // have been delivered. Give other threads a chance to run and |
| // pick up the signal. |
| osyield() |
| osyield() |
| osyield() |
| |
| // If that didn't work, try _SIG_DFL. |
| setsig(sig, _SIG_DFL) |
| raise(sig) |
| |
| osyield() |
| osyield() |
| osyield() |
| |
| // If we are still somehow running, just exit with the wrong status. |
| exit(2) |
| } |
| |
| // raisebadsignal is called when a signal is received on a non-Go |
| // thread, and the Go program does not want to handle it (that is, the |
| // program has not called os/signal.Notify for the signal). |
| func raisebadsignal(sig uint32, c *sigctxt) { |
| if sig == _SIGPROF { |
| // Ignore profiling signals that arrive on non-Go threads. |
| return |
| } |
| |
| var handler uintptr |
| if sig >= _NSIG { |
| handler = _SIG_DFL |
| } else { |
| handler = atomic.Loaduintptr(&fwdSig[sig]) |
| } |
| |
| // Reset the signal handler and raise the signal. |
| // We are currently running inside a signal handler, so the |
| // signal is blocked. We need to unblock it before raising the |
| // signal, or the signal we raise will be ignored until we return |
| // from the signal handler. We know that the signal was unblocked |
| // before entering the handler, or else we would not have received |
| // it. That means that we don't have to worry about blocking it |
| // again. |
| unblocksig(sig) |
| setsig(sig, handler) |
| |
| // If we're linked into a non-Go program we want to try to |
| // avoid modifying the original context in which the signal |
| // was raised. If the handler is the default, we know it |
| // is non-recoverable, so we don't have to worry about |
| // re-installing sighandler. At this point we can just |
| // return and the signal will be re-raised and caught by |
| // the default handler with the correct context. |
| // |
| // On FreeBSD, the libthr sigaction code prevents |
| // this from working so we fall through to raise. |
| if GOOS != "freebsd" && (isarchive || islibrary) && handler == _SIG_DFL && c.sigcode() != _SI_USER { |
| return |
| } |
| |
| raise(sig) |
| |
| // Give the signal a chance to be delivered. |
| // In almost all real cases the program is about to crash, |
| // so sleeping here is not a waste of time. |
| usleep(1000) |
| |
| // If the signal didn't cause the program to exit, restore the |
| // Go signal handler and carry on. |
| // |
| // We may receive another instance of the signal before we |
| // restore the Go handler, but that is not so bad: we know |
| // that the Go program has been ignoring the signal. |
| setsig(sig, abi.FuncPCABIInternal(sighandler)) |
| } |
| |
| //go:nosplit |
| func crash() { |
| // OS X core dumps are linear dumps of the mapped memory, |
| // from the first virtual byte to the last, with zeros in the gaps. |
| // Because of the way we arrange the address space on 64-bit systems, |
| // this means the OS X core file will be >128 GB and even on a zippy |
| // workstation can take OS X well over an hour to write (uninterruptible). |
| // Save users from making that mistake. |
| if GOOS == "darwin" && GOARCH == "amd64" { |
| return |
| } |
| |
| dieFromSignal(_SIGABRT) |
| } |
| |
| // ensureSigM starts one global, sleeping thread to make sure at least one thread |
| // is available to catch signals enabled for os/signal. |
| func ensureSigM() { |
| if maskUpdatedChan != nil { |
| return |
| } |
| maskUpdatedChan = make(chan struct{}) |
| disableSigChan = make(chan uint32) |
| enableSigChan = make(chan uint32) |
| go func() { |
| // Signal masks are per-thread, so make sure this goroutine stays on one |
| // thread. |
| LockOSThread() |
| defer UnlockOSThread() |
| // The sigBlocked mask contains the signals not active for os/signal, |
| // initially all signals except the essential. When signal.Notify()/Stop is called, |
| // sigenable/sigdisable in turn notify this thread to update its signal |
| // mask accordingly. |
| sigBlocked := sigset_all |
| for i := range sigtable { |
| if !blockableSig(uint32(i)) { |
| sigdelset(&sigBlocked, i) |
| } |
| } |
| sigprocmask(_SIG_SETMASK, &sigBlocked, nil) |
| for { |
| select { |
| case sig := <-enableSigChan: |
| if sig > 0 { |
| sigdelset(&sigBlocked, int(sig)) |
| } |
| case sig := <-disableSigChan: |
| if sig > 0 && blockableSig(sig) { |
| sigaddset(&sigBlocked, int(sig)) |
| } |
| } |
| sigprocmask(_SIG_SETMASK, &sigBlocked, nil) |
| maskUpdatedChan <- struct{}{} |
| } |
| }() |
| } |
| |
| // This is called when we receive a signal when there is no signal stack. |
| // This can only happen if non-Go code calls sigaltstack to disable the |
| // signal stack. |
| func noSignalStack(sig uint32) { |
| println("signal", sig, "received on thread with no signal stack") |
| throw("non-Go code disabled sigaltstack") |
| } |
| |
| // This is called if we receive a signal when there is a signal stack |
| // but we are not on it. This can only happen if non-Go code called |
| // sigaction without setting the SS_ONSTACK flag. |
| func sigNotOnStack(sig uint32) { |
| println("signal", sig, "received but handler not on signal stack") |
| throw("non-Go code set up signal handler without SA_ONSTACK flag") |
| } |
| |
| // signalDuringFork is called if we receive a signal while doing a fork. |
| // We do not want signals at that time, as a signal sent to the process |
| // group may be delivered to the child process, causing confusion. |
| // This should never be called, because we block signals across the fork; |
| // this function is just a safety check. See issue 18600 for background. |
| func signalDuringFork(sig uint32) { |
| println("signal", sig, "received during fork") |
| throw("signal received during fork") |
| } |
| |
| var badginsignalMsg = "fatal: bad g in signal handler\n" |
| |
| // This runs on a foreign stack, without an m or a g. No stack split. |
| // |
| //go:nosplit |
| //go:norace |
| //go:nowritebarrierrec |
| func badsignal(sig uintptr, c *sigctxt) { |
| if !iscgo && !cgoHasExtraM { |
| // There is no extra M. needm will not be able to grab |
| // an M. Instead of hanging, just crash. |
| // Cannot call split-stack function as there is no G. |
| s := stringStructOf(&badginsignalMsg) |
| write(2, s.str, int32(s.len)) |
| exit(2) |
| *(*uintptr)(unsafe.Pointer(uintptr(123))) = 2 |
| } |
| needm() |
| if !sigsend(uint32(sig)) { |
| // A foreign thread received the signal sig, and the |
| // Go code does not want to handle it. |
| raisebadsignal(uint32(sig), c) |
| } |
| dropm() |
| } |
| |
| //go:noescape |
| func sigfwd(fn uintptr, sig uint32, info *siginfo, ctx unsafe.Pointer) |
| |
| // Determines if the signal should be handled by Go and if not, forwards the |
| // signal to the handler that was installed before Go's. Returns whether the |
| // signal was forwarded. |
| // This is called by the signal handler, and the world may be stopped. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func sigfwdgo(sig uint32, info *siginfo, ctx unsafe.Pointer) bool { |
| if sig >= uint32(len(sigtable)) { |
| return false |
| } |
| fwdFn := atomic.Loaduintptr(&fwdSig[sig]) |
| flags := sigtable[sig].flags |
| |
| // If we aren't handling the signal, forward it. |
| if atomic.Load(&handlingSig[sig]) == 0 || !signalsOK { |
| // If the signal is ignored, doing nothing is the same as forwarding. |
| if fwdFn == _SIG_IGN || (fwdFn == _SIG_DFL && flags&_SigIgn != 0) { |
| return true |
| } |
| // We are not handling the signal and there is no other handler to forward to. |
| // Crash with the default behavior. |
| if fwdFn == _SIG_DFL { |
| setsig(sig, _SIG_DFL) |
| dieFromSignal(sig) |
| return false |
| } |
| |
| sigfwd(fwdFn, sig, info, ctx) |
| return true |
| } |
| |
| // This function and its caller sigtrampgo assumes SIGPIPE is delivered on the |
| // originating thread. This property does not hold on macOS (golang.org/issue/33384), |
| // so we have no choice but to ignore SIGPIPE. |
| if (GOOS == "darwin" || GOOS == "ios") && sig == _SIGPIPE { |
| return true |
| } |
| |
| // If there is no handler to forward to, no need to forward. |
| if fwdFn == _SIG_DFL { |
| return false |
| } |
| |
| c := &sigctxt{info, ctx} |
| // Only forward synchronous signals and SIGPIPE. |
| // Unfortunately, user generated SIGPIPEs will also be forwarded, because si_code |
| // is set to _SI_USER even for a SIGPIPE raised from a write to a closed socket |
| // or pipe. |
| if (c.sigcode() == _SI_USER || flags&_SigPanic == 0) && sig != _SIGPIPE { |
| return false |
| } |
| // Determine if the signal occurred inside Go code. We test that: |
| // (1) we weren't in VDSO page, |
| // (2) we were in a goroutine (i.e., m.curg != nil), and |
| // (3) we weren't in CGO. |
| g := sigFetchG(c) |
| if g != nil && g.m != nil && g.m.curg != nil && !g.m.incgo { |
| return false |
| } |
| |
| // Signal not handled by Go, forward it. |
| if fwdFn != _SIG_IGN { |
| sigfwd(fwdFn, sig, info, ctx) |
| } |
| |
| return true |
| } |
| |
| // sigsave saves the current thread's signal mask into *p. |
| // This is used to preserve the non-Go signal mask when a non-Go |
| // thread calls a Go function. |
| // This is nosplit and nowritebarrierrec because it is called by needm |
| // which may be called on a non-Go thread with no g available. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func sigsave(p *sigset) { |
| sigprocmask(_SIG_SETMASK, nil, p) |
| } |
| |
| // msigrestore sets the current thread's signal mask to sigmask. |
| // This is used to restore the non-Go signal mask when a non-Go thread |
| // calls a Go function. |
| // This is nosplit and nowritebarrierrec because it is called by dropm |
| // after g has been cleared. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func msigrestore(sigmask sigset) { |
| sigprocmask(_SIG_SETMASK, &sigmask, nil) |
| } |
| |
| // sigsetAllExiting is used by sigblock(true) when a thread is |
| // exiting. sigset_all is defined in OS specific code, and per GOOS |
| // behavior may override this default for sigsetAllExiting: see |
| // osinit(). |
| var sigsetAllExiting = sigset_all |
| |
| // sigblock blocks signals in the current thread's signal mask. |
| // This is used to block signals while setting up and tearing down g |
| // when a non-Go thread calls a Go function. When a thread is exiting |
| // we use the sigsetAllExiting value, otherwise the OS specific |
| // definition of sigset_all is used. |
| // This is nosplit and nowritebarrierrec because it is called by needm |
| // which may be called on a non-Go thread with no g available. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func sigblock(exiting bool) { |
| if exiting { |
| sigprocmask(_SIG_SETMASK, &sigsetAllExiting, nil) |
| return |
| } |
| sigprocmask(_SIG_SETMASK, &sigset_all, nil) |
| } |
| |
| // unblocksig removes sig from the current thread's signal mask. |
| // This is nosplit and nowritebarrierrec because it is called from |
| // dieFromSignal, which can be called by sigfwdgo while running in the |
| // signal handler, on the signal stack, with no g available. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func unblocksig(sig uint32) { |
| var set sigset |
| sigaddset(&set, int(sig)) |
| sigprocmask(_SIG_UNBLOCK, &set, nil) |
| } |
| |
| // minitSignals is called when initializing a new m to set the |
| // thread's alternate signal stack and signal mask. |
| func minitSignals() { |
| minitSignalStack() |
| minitSignalMask() |
| } |
| |
| // minitSignalStack is called when initializing a new m to set the |
| // alternate signal stack. If the alternate signal stack is not set |
| // for the thread (the normal case) then set the alternate signal |
| // stack to the gsignal stack. If the alternate signal stack is set |
| // for the thread (the case when a non-Go thread sets the alternate |
| // signal stack and then calls a Go function) then set the gsignal |
| // stack to the alternate signal stack. We also set the alternate |
| // signal stack to the gsignal stack if cgo is not used (regardless |
| // of whether it is already set). Record which choice was made in |
| // newSigstack, so that it can be undone in unminit. |
| func minitSignalStack() { |
| _g_ := getg() |
| var st stackt |
| sigaltstack(nil, &st) |
| if st.ss_flags&_SS_DISABLE != 0 || !iscgo { |
| signalstack(&_g_.m.gsignal.stack) |
| _g_.m.newSigstack = true |
| } else { |
| setGsignalStack(&st, &_g_.m.goSigStack) |
| _g_.m.newSigstack = false |
| } |
| } |
| |
| // minitSignalMask is called when initializing a new m to set the |
| // thread's signal mask. When this is called all signals have been |
| // blocked for the thread. This starts with m.sigmask, which was set |
| // either from initSigmask for a newly created thread or by calling |
| // sigsave if this is a non-Go thread calling a Go function. It |
| // removes all essential signals from the mask, thus causing those |
| // signals to not be blocked. Then it sets the thread's signal mask. |
| // After this is called the thread can receive signals. |
| func minitSignalMask() { |
| nmask := getg().m.sigmask |
| for i := range sigtable { |
| if !blockableSig(uint32(i)) { |
| sigdelset(&nmask, i) |
| } |
| } |
| sigprocmask(_SIG_SETMASK, &nmask, nil) |
| } |
| |
| // unminitSignals is called from dropm, via unminit, to undo the |
| // effect of calling minit on a non-Go thread. |
| // |
| //go:nosplit |
| func unminitSignals() { |
| if getg().m.newSigstack { |
| st := stackt{ss_flags: _SS_DISABLE} |
| sigaltstack(&st, nil) |
| } else { |
| // We got the signal stack from someone else. Restore |
| // the Go-allocated stack in case this M gets reused |
| // for another thread (e.g., it's an extram). Also, on |
| // Android, libc allocates a signal stack for all |
| // threads, so it's important to restore the Go stack |
| // even on Go-created threads so we can free it. |
| restoreGsignalStack(&getg().m.goSigStack) |
| } |
| } |
| |
| // blockableSig reports whether sig may be blocked by the signal mask. |
| // We never want to block the signals marked _SigUnblock; |
| // these are the synchronous signals that turn into a Go panic. |
| // We never want to block the preemption signal if it is being used. |
| // In a Go program--not a c-archive/c-shared--we never want to block |
| // the signals marked _SigKill or _SigThrow, as otherwise it's possible |
| // for all running threads to block them and delay their delivery until |
| // we start a new thread. When linked into a C program we let the C code |
| // decide on the disposition of those signals. |
| func blockableSig(sig uint32) bool { |
| flags := sigtable[sig].flags |
| if flags&_SigUnblock != 0 { |
| return false |
| } |
| if sig == sigPreempt && preemptMSupported && debug.asyncpreemptoff == 0 { |
| return false |
| } |
| if isarchive || islibrary { |
| return true |
| } |
| return flags&(_SigKill|_SigThrow) == 0 |
| } |
| |
| // gsignalStack saves the fields of the gsignal stack changed by |
| // setGsignalStack. |
| type gsignalStack struct { |
| stack stack |
| stackguard0 uintptr |
| stackguard1 uintptr |
| stktopsp uintptr |
| } |
| |
| // setGsignalStack sets the gsignal stack of the current m to an |
| // alternate signal stack returned from the sigaltstack system call. |
| // It saves the old values in *old for use by restoreGsignalStack. |
| // This is used when handling a signal if non-Go code has set the |
| // alternate signal stack. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func setGsignalStack(st *stackt, old *gsignalStack) { |
| g := getg() |
| if old != nil { |
| old.stack = g.m.gsignal.stack |
| old.stackguard0 = g.m.gsignal.stackguard0 |
| old.stackguard1 = g.m.gsignal.stackguard1 |
| old.stktopsp = g.m.gsignal.stktopsp |
| } |
| stsp := uintptr(unsafe.Pointer(st.ss_sp)) |
| g.m.gsignal.stack.lo = stsp |
| g.m.gsignal.stack.hi = stsp + st.ss_size |
| g.m.gsignal.stackguard0 = stsp + _StackGuard |
| g.m.gsignal.stackguard1 = stsp + _StackGuard |
| } |
| |
| // restoreGsignalStack restores the gsignal stack to the value it had |
| // before entering the signal handler. |
| // |
| //go:nosplit |
| //go:nowritebarrierrec |
| func restoreGsignalStack(st *gsignalStack) { |
| gp := getg().m.gsignal |
| gp.stack = st.stack |
| gp.stackguard0 = st.stackguard0 |
| gp.stackguard1 = st.stackguard1 |
| gp.stktopsp = st.stktopsp |
| } |
| |
| // signalstack sets the current thread's alternate signal stack to s. |
| // |
| //go:nosplit |
| func signalstack(s *stack) { |
| st := stackt{ss_size: s.hi - s.lo} |
| setSignalstackSP(&st, s.lo) |
| sigaltstack(&st, nil) |
| } |
| |
| // setsigsegv is used on darwin/arm64 to fake a segmentation fault. |
| // |
| // This is exported via linkname to assembly in runtime/cgo. |
| // |
| //go:nosplit |
| //go:linkname setsigsegv |
| func setsigsegv(pc uintptr) { |
| g := getg() |
| g.sig = _SIGSEGV |
| g.sigpc = pc |
| g.sigcode0 = _SEGV_MAPERR |
| g.sigcode1 = 0 // TODO: emulate si_addr |
| } |