| // Copyright 2019 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // Address range data structure. |
| // |
| // This file contains an implementation of a data structure which |
| // manages ordered address ranges. |
| |
| package runtime |
| |
| import ( |
| "runtime/internal/sys" |
| "unsafe" |
| ) |
| |
| // addrRange represents a region of address space. |
| // |
| // An addrRange must never span a gap in the address space. |
| type addrRange struct { |
| // base and limit together represent the region of address space |
| // [base, limit). That is, base is inclusive, limit is exclusive. |
| // These are address over an offset view of the address space on |
| // platforms with a segmented address space, that is, on platforms |
| // where arenaBaseOffset != 0. |
| base, limit offAddr |
| } |
| |
| // makeAddrRange creates a new address range from two virtual addresses. |
| // |
| // Throws if the base and limit are not in the same memory segment. |
| func makeAddrRange(base, limit uintptr) addrRange { |
| r := addrRange{offAddr{base}, offAddr{limit}} |
| if (base-arenaBaseOffset >= base) != (limit-arenaBaseOffset >= limit) { |
| throw("addr range base and limit are not in the same memory segment") |
| } |
| return r |
| } |
| |
| // size returns the size of the range represented in bytes. |
| func (a addrRange) size() uintptr { |
| if !a.base.lessThan(a.limit) { |
| return 0 |
| } |
| // Subtraction is safe because limit and base must be in the same |
| // segment of the address space. |
| return a.limit.diff(a.base) |
| } |
| |
| // contains returns whether or not the range contains a given address. |
| func (a addrRange) contains(addr uintptr) bool { |
| return a.base.lessEqual(offAddr{addr}) && (offAddr{addr}).lessThan(a.limit) |
| } |
| |
| // subtract takes the addrRange toPrune and cuts out any overlap with |
| // from, then returns the new range. subtract assumes that a and b |
| // either don't overlap at all, only overlap on one side, or are equal. |
| // If b is strictly contained in a, thus forcing a split, it will throw. |
| func (a addrRange) subtract(b addrRange) addrRange { |
| if b.base.lessEqual(a.base) && a.limit.lessEqual(b.limit) { |
| return addrRange{} |
| } else if a.base.lessThan(b.base) && b.limit.lessThan(a.limit) { |
| throw("bad prune") |
| } else if b.limit.lessThan(a.limit) && a.base.lessThan(b.limit) { |
| a.base = b.limit |
| } else if a.base.lessThan(b.base) && b.base.lessThan(a.limit) { |
| a.limit = b.base |
| } |
| return a |
| } |
| |
| // removeGreaterEqual removes all addresses in a greater than or equal |
| // to addr and returns the new range. |
| func (a addrRange) removeGreaterEqual(addr uintptr) addrRange { |
| if (offAddr{addr}).lessEqual(a.base) { |
| return addrRange{} |
| } |
| if a.limit.lessEqual(offAddr{addr}) { |
| return a |
| } |
| return makeAddrRange(a.base.addr(), addr) |
| } |
| |
| var ( |
| // minOffAddr is the minimum address in the offset space, and |
| // it corresponds to the virtual address arenaBaseOffset. |
| minOffAddr = offAddr{arenaBaseOffset} |
| |
| // maxOffAddr is the maximum address in the offset address |
| // space. It corresponds to the highest virtual address representable |
| // by the page alloc chunk and heap arena maps. |
| maxOffAddr = offAddr{(((1 << heapAddrBits) - 1) + arenaBaseOffset) & uintptrMask} |
| ) |
| |
| // offAddr represents an address in a contiguous view |
| // of the address space on systems where the address space is |
| // segmented. On other systems, it's just a normal address. |
| type offAddr struct { |
| // a is just the virtual address, but should never be used |
| // directly. Call addr() to get this value instead. |
| a uintptr |
| } |
| |
| // add adds a uintptr offset to the offAddr. |
| func (l offAddr) add(bytes uintptr) offAddr { |
| return offAddr{a: l.a + bytes} |
| } |
| |
| // sub subtracts a uintptr offset from the offAddr. |
| func (l offAddr) sub(bytes uintptr) offAddr { |
| return offAddr{a: l.a - bytes} |
| } |
| |
| // diff returns the amount of bytes in between the |
| // two offAddrs. |
| func (l1 offAddr) diff(l2 offAddr) uintptr { |
| return l1.a - l2.a |
| } |
| |
| // lessThan returns true if l1 is less than l2 in the offset |
| // address space. |
| func (l1 offAddr) lessThan(l2 offAddr) bool { |
| return (l1.a - arenaBaseOffset) < (l2.a - arenaBaseOffset) |
| } |
| |
| // lessEqual returns true if l1 is less than or equal to l2 in |
| // the offset address space. |
| func (l1 offAddr) lessEqual(l2 offAddr) bool { |
| return (l1.a - arenaBaseOffset) <= (l2.a - arenaBaseOffset) |
| } |
| |
| // equal returns true if the two offAddr values are equal. |
| func (l1 offAddr) equal(l2 offAddr) bool { |
| // No need to compare in the offset space, it |
| // means the same thing. |
| return l1 == l2 |
| } |
| |
| // addr returns the virtual address for this offset address. |
| func (l offAddr) addr() uintptr { |
| return l.a |
| } |
| |
| // addrRanges is a data structure holding a collection of ranges of |
| // address space. |
| // |
| // The ranges are coalesced eagerly to reduce the |
| // number ranges it holds. |
| // |
| // The slice backing store for this field is persistentalloc'd |
| // and thus there is no way to free it. |
| // |
| // addrRanges is not thread-safe. |
| type addrRanges struct { |
| // ranges is a slice of ranges sorted by base. |
| ranges []addrRange |
| |
| // totalBytes is the total amount of address space in bytes counted by |
| // this addrRanges. |
| totalBytes uintptr |
| |
| // sysStat is the stat to track allocations by this type |
| sysStat *sysMemStat |
| } |
| |
| func (a *addrRanges) init(sysStat *sysMemStat) { |
| ranges := (*notInHeapSlice)(unsafe.Pointer(&a.ranges)) |
| ranges.len = 0 |
| ranges.cap = 16 |
| ranges.array = (*notInHeap)(persistentalloc(unsafe.Sizeof(addrRange{})*uintptr(ranges.cap), sys.PtrSize, sysStat)) |
| a.sysStat = sysStat |
| a.totalBytes = 0 |
| } |
| |
| // findSucc returns the first index in a such that base is |
| // less than the base of the addrRange at that index. |
| func (a *addrRanges) findSucc(addr uintptr) int { |
| // TODO(mknyszek): Consider a binary search for large arrays. |
| // While iterating over these ranges is potentially expensive, |
| // the expected number of ranges is small, ideally just 1, |
| // since Go heaps are usually mostly contiguous. |
| base := offAddr{addr} |
| for i := range a.ranges { |
| if base.lessThan(a.ranges[i].base) { |
| return i |
| } |
| } |
| return len(a.ranges) |
| } |
| |
| // findAddrGreaterEqual returns the smallest address represented by a |
| // that is >= addr. Thus, if the address is represented by a, |
| // then it returns addr. The second return value indicates whether |
| // such an address exists for addr in a. That is, if addr is larger than |
| // any address known to a, the second return value will be false. |
| func (a *addrRanges) findAddrGreaterEqual(addr uintptr) (uintptr, bool) { |
| i := a.findSucc(addr) |
| if i == 0 { |
| return a.ranges[0].base.addr(), true |
| } |
| if a.ranges[i-1].contains(addr) { |
| return addr, true |
| } |
| if i < len(a.ranges) { |
| return a.ranges[i].base.addr(), true |
| } |
| return 0, false |
| } |
| |
| // contains returns true if a covers the address addr. |
| func (a *addrRanges) contains(addr uintptr) bool { |
| i := a.findSucc(addr) |
| if i == 0 { |
| return false |
| } |
| return a.ranges[i-1].contains(addr) |
| } |
| |
| // add inserts a new address range to a. |
| // |
| // r must not overlap with any address range in a and r.size() must be > 0. |
| func (a *addrRanges) add(r addrRange) { |
| // The copies in this function are potentially expensive, but this data |
| // structure is meant to represent the Go heap. At worst, copying this |
| // would take ~160µs assuming a conservative copying rate of 25 GiB/s (the |
| // copy will almost never trigger a page fault) for a 1 TiB heap with 4 MiB |
| // arenas which is completely discontiguous. ~160µs is still a lot, but in |
| // practice most platforms have 64 MiB arenas (which cuts this by a factor |
| // of 16) and Go heaps are usually mostly contiguous, so the chance that |
| // an addrRanges even grows to that size is extremely low. |
| |
| // An empty range has no effect on the set of addresses represented |
| // by a, but passing a zero-sized range is almost always a bug. |
| if r.size() == 0 { |
| print("runtime: range = {", hex(r.base.addr()), ", ", hex(r.limit.addr()), "}\n") |
| throw("attempted to add zero-sized address range") |
| } |
| // Because we assume r is not currently represented in a, |
| // findSucc gives us our insertion index. |
| i := a.findSucc(r.base.addr()) |
| coalescesDown := i > 0 && a.ranges[i-1].limit.equal(r.base) |
| coalescesUp := i < len(a.ranges) && r.limit.equal(a.ranges[i].base) |
| if coalescesUp && coalescesDown { |
| // We have neighbors and they both border us. |
| // Merge a.ranges[i-1], r, and a.ranges[i] together into a.ranges[i-1]. |
| a.ranges[i-1].limit = a.ranges[i].limit |
| |
| // Delete a.ranges[i]. |
| copy(a.ranges[i:], a.ranges[i+1:]) |
| a.ranges = a.ranges[:len(a.ranges)-1] |
| } else if coalescesDown { |
| // We have a neighbor at a lower address only and it borders us. |
| // Merge the new space into a.ranges[i-1]. |
| a.ranges[i-1].limit = r.limit |
| } else if coalescesUp { |
| // We have a neighbor at a higher address only and it borders us. |
| // Merge the new space into a.ranges[i]. |
| a.ranges[i].base = r.base |
| } else { |
| // We may or may not have neighbors which don't border us. |
| // Add the new range. |
| if len(a.ranges)+1 > cap(a.ranges) { |
| // Grow the array. Note that this leaks the old array, but since |
| // we're doubling we have at most 2x waste. For a 1 TiB heap and |
| // 4 MiB arenas which are all discontiguous (both very conservative |
| // assumptions), this would waste at most 4 MiB of memory. |
| oldRanges := a.ranges |
| ranges := (*notInHeapSlice)(unsafe.Pointer(&a.ranges)) |
| ranges.len = len(oldRanges) + 1 |
| ranges.cap = cap(oldRanges) * 2 |
| ranges.array = (*notInHeap)(persistentalloc(unsafe.Sizeof(addrRange{})*uintptr(ranges.cap), sys.PtrSize, a.sysStat)) |
| |
| // Copy in the old array, but make space for the new range. |
| copy(a.ranges[:i], oldRanges[:i]) |
| copy(a.ranges[i+1:], oldRanges[i:]) |
| } else { |
| a.ranges = a.ranges[:len(a.ranges)+1] |
| copy(a.ranges[i+1:], a.ranges[i:]) |
| } |
| a.ranges[i] = r |
| } |
| a.totalBytes += r.size() |
| } |
| |
| // removeLast removes and returns the highest-addressed contiguous range |
| // of a, or the last nBytes of that range, whichever is smaller. If a is |
| // empty, it returns an empty range. |
| func (a *addrRanges) removeLast(nBytes uintptr) addrRange { |
| if len(a.ranges) == 0 { |
| return addrRange{} |
| } |
| r := a.ranges[len(a.ranges)-1] |
| size := r.size() |
| if size > nBytes { |
| newEnd := r.limit.sub(nBytes) |
| a.ranges[len(a.ranges)-1].limit = newEnd |
| a.totalBytes -= nBytes |
| return addrRange{newEnd, r.limit} |
| } |
| a.ranges = a.ranges[:len(a.ranges)-1] |
| a.totalBytes -= size |
| return r |
| } |
| |
| // removeGreaterEqual removes the ranges of a which are above addr, and additionally |
| // splits any range containing addr. |
| func (a *addrRanges) removeGreaterEqual(addr uintptr) { |
| pivot := a.findSucc(addr) |
| if pivot == 0 { |
| // addr is before all ranges in a. |
| a.totalBytes = 0 |
| a.ranges = a.ranges[:0] |
| return |
| } |
| removed := uintptr(0) |
| for _, r := range a.ranges[pivot:] { |
| removed += r.size() |
| } |
| if r := a.ranges[pivot-1]; r.contains(addr) { |
| removed += r.size() |
| r = r.removeGreaterEqual(addr) |
| if r.size() == 0 { |
| pivot-- |
| } else { |
| removed -= r.size() |
| a.ranges[pivot-1] = r |
| } |
| } |
| a.ranges = a.ranges[:pivot] |
| a.totalBytes -= removed |
| } |
| |
| // cloneInto makes a deep clone of a's state into b, re-using |
| // b's ranges if able. |
| func (a *addrRanges) cloneInto(b *addrRanges) { |
| if len(a.ranges) > cap(b.ranges) { |
| // Grow the array. |
| ranges := (*notInHeapSlice)(unsafe.Pointer(&b.ranges)) |
| ranges.len = 0 |
| ranges.cap = cap(a.ranges) |
| ranges.array = (*notInHeap)(persistentalloc(unsafe.Sizeof(addrRange{})*uintptr(ranges.cap), sys.PtrSize, b.sysStat)) |
| } |
| b.ranges = b.ranges[:len(a.ranges)] |
| b.totalBytes = a.totalBytes |
| copy(b.ranges, a.ranges) |
| } |