src/debug/gosym/symtab.go - go - Git at Google

 // Copyright 2009 The Go Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.

 // Package gosym implements access to the Go symbol
 // and line number tables embedded in Go binaries generated
 // by the gc compilers.
 package gosym

 import (
 	"bytes"
 	"encoding/binary"
 	"fmt"
 	"strconv"
 	"strings"
 )

 /*
  * Symbols
  */

 // A Sym represents a single symbol table entry.
 type Sym struct {
 	Value  uint64
 	Type   byte
 	Name   string
 	GoType uint64
 	// If this symbol is a function symbol, the corresponding Func
 	Func *Func
 }

 // Static reports whether this symbol is static (not visible outside its file).
 func (s *Sym) Static() bool { return s.Type >= 'a' }

 // nameWithoutInst returns s.Name if s.Name has no brackets (does not reference an
 // instantiated type, function, or method). If s.Name contains brackets, then it
 // returns s.Name with all the contents between (and including) the outermost left
 // and right bracket removed. This is useful to ignore any extra slashes or dots
 // inside the brackets from the string searches below, where needed.
 func (s *Sym) nameWithoutInst() string {
 	start := strings.Index(s.Name, "[")
 	if start < 0 {
 		return s.Name
 	}
 	end := strings.LastIndex(s.Name, "]")
 	if end < 0 {
 		// Malformed name, should contain closing bracket too.
 		return s.Name
 	}
 	return s.Name[0:start] + s.Name[end+1:]
 }

 // PackageName returns the package part of the symbol name,
 // or the empty string if there is none.
 func (s *Sym) PackageName() string {
 	name := s.nameWithoutInst()

 	// A prefix of "type." and "go." is a compiler-generated symbol that doesn't belong to any package.
 	// See variable reservedimports in cmd/compile/internal/gc/subr.go
 	if strings.HasPrefix(name, "go.") || strings.HasPrefix(name, "type.") {
 		return ""
 	}

 	pathend := strings.LastIndex(name, "/")
 	if pathend < 0 {
 		pathend = 0
 	}

 	if i := strings.Index(name[pathend:], "."); i != -1 {
 		return name[:pathend+i]
 	}
 	return ""
 }

 // ReceiverName returns the receiver type name of this symbol,
 // or the empty string if there is none.  A receiver name is only detected in
 // the case that s.Name is fully-specified with a package name.
 func (s *Sym) ReceiverName() string {
 	name := s.nameWithoutInst()
 	// If we find a slash in name, it should precede any bracketed expression
 	// that was removed, so pathend will apply correctly to name and s.Name.
 	pathend := strings.LastIndex(name, "/")
 	if pathend < 0 {
 		pathend = 0
 	}
 	// Find the first dot after pathend (or from the beginning, if there was
 	// no slash in name).
 	l := strings.Index(name[pathend:], ".")
 	// Find the last dot after pathend (or the beginnng).
 	r := strings.LastIndex(name[pathend:], ".")
 	if l == -1 || r == -1 || l == r {
 		// There is no receiver if we didn't find two distinct dots after pathend.
 		return ""
 	}
 	// Given there is a trailing '.' that is in name, find it now in s.Name.
 	// pathend+l should apply to s.Name, because it should be the dot in the
 	// package name.
 	r = strings.LastIndex(s.Name[pathend:], ".")
 	return s.Name[pathend+l+1 : pathend+r]
 }

 // BaseName returns the symbol name without the package or receiver name.
 func (s *Sym) BaseName() string {
 	name := s.nameWithoutInst()
 	if i := strings.LastIndex(name, "."); i != -1 {
 		if s.Name != name {
 			brack := strings.Index(s.Name, "[")
 			if i > brack {
 				// BaseName is a method name after the brackets, so
 				// recalculate for s.Name. Otherwise, i applies
 				// correctly to s.Name, since it is before the
 				// brackets.
 				i = strings.LastIndex(s.Name, ".")
 			}
 		}
 		return s.Name[i+1:]
 	}
 	return s.Name
 }

 // A Func collects information about a single function.
 type Func struct {
 	Entry uint64
 	*Sym
 	End       uint64
 	Params    []*Sym // nil for Go 1.3 and later binaries
 	Locals    []*Sym // nil for Go 1.3 and later binaries
 	FrameSize int
 	LineTable *LineTable
 	Obj       *Obj
 }

 // An Obj represents a collection of functions in a symbol table.
 //
 // The exact method of division of a binary into separate Objs is an internal detail
 // of the symbol table format.
 //
 // In early versions of Go each source file became a different Obj.
 //
 // In Go 1 and Go 1.1, each package produced one Obj for all Go sources
 // and one Obj per C source file.
 //
 // In Go 1.2, there is a single Obj for the entire program.
 type Obj struct {
 	// Funcs is a list of functions in the Obj.
 	Funcs []Func

 	// In Go 1.1 and earlier, Paths is a list of symbols corresponding
 	// to the source file names that produced the Obj.
 	// In Go 1.2, Paths is nil.
 	// Use the keys of Table.Files to obtain a list of source files.
 	Paths []Sym // meta
 }

 /*
  * Symbol tables
  */

 // Table represents a Go symbol table. It stores all of the
 // symbols decoded from the program and provides methods to translate
 // between symbols, names, and addresses.
 type Table struct {
 	Syms  []Sym // nil for Go 1.3 and later binaries
 	Funcs []Func
 	Files map[string]*Obj // for Go 1.2 and later all files map to one Obj
 	Objs  []Obj           // for Go 1.2 and later only one Obj in slice

 	go12line *LineTable // Go 1.2 line number table
 }

 type sym struct {
 	value  uint64
 	gotype uint64
 	typ    byte
 	name   []byte
 }

 var (
 	littleEndianSymtab    = []byte{0xFD, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00}
 	bigEndianSymtab       = []byte{0xFF, 0xFF, 0xFF, 0xFD, 0x00, 0x00, 0x00}
 	oldLittleEndianSymtab = []byte{0xFE, 0xFF, 0xFF, 0xFF, 0x00, 0x00}
 )

 func walksymtab(data []byte, fn func(sym) error) error {
 	if len(data) == 0 { // missing symtab is okay
 		return nil
 	}
 	var order binary.ByteOrder = binary.BigEndian
 	newTable := false
 	switch {
 	case bytes.HasPrefix(data, oldLittleEndianSymtab):
 		// Same as Go 1.0, but little endian.
 		// Format was used during interim development between Go 1.0 and Go 1.1.
 		// Should not be widespread, but easy to support.
 		data = data[6:]
 		order = binary.LittleEndian
 	case bytes.HasPrefix(data, bigEndianSymtab):
 		newTable = true
 	case bytes.HasPrefix(data, littleEndianSymtab):
 		newTable = true
 		order = binary.LittleEndian
 	}
 	var ptrsz int
 	if newTable {
 		if len(data) < 8 {
 			return &DecodingError{len(data), "unexpected EOF", nil}
 		}
 		ptrsz = int(data[7])
 		if ptrsz != 4 && ptrsz != 8 {
 			return &DecodingError{7, "invalid pointer size", ptrsz}
 		}
 		data = data[8:]
 	}
 	var s sym
 	p := data
 	for len(p) >= 4 {
 		var typ byte
 		if newTable {
 			// Symbol type, value, Go type.
 			typ = p[0] & 0x3F
 			wideValue := p[0]&0x40 != 0
 			goType := p[0]&0x80 != 0
 			if typ < 26 {
 				typ += 'A'
 			} else {
 				typ += 'a' - 26
 			}
 			s.typ = typ
 			p = p[1:]
 			if wideValue {
 				if len(p) < ptrsz {
 					return &DecodingError{len(data), "unexpected EOF", nil}
 				}
 				// fixed-width value
 				if ptrsz == 8 {
 					s.value = order.Uint64(p[0:8])
 					p = p[8:]
 				} else {
 					s.value = uint64(order.Uint32(p[0:4]))
 					p = p[4:]
 				}
 			} else {
 				// varint value
 				s.value = 0
 				shift := uint(0)
 				for len(p) > 0 && p[0]&0x80 != 0 {
 					s.value |= uint64(p[0]&0x7F) << shift
 					shift += 7
 					p = p[1:]
 				}
 				if len(p) == 0 {
 					return &DecodingError{len(data), "unexpected EOF", nil}
 				}
 				s.value |= uint64(p[0]) << shift
 				p = p[1:]
 			}
 			if goType {
 				if len(p) < ptrsz {
 					return &DecodingError{len(data), "unexpected EOF", nil}
 				}
 				// fixed-width go type
 				if ptrsz == 8 {
 					s.gotype = order.Uint64(p[0:8])
 					p = p[8:]
 				} else {
 					s.gotype = uint64(order.Uint32(p[0:4]))
 					p = p[4:]
 				}
 			}
 		} else {
 			// Value, symbol type.
 			s.value = uint64(order.Uint32(p[0:4]))
 			if len(p) < 5 {
 				return &DecodingError{len(data), "unexpected EOF", nil}
 			}
 			typ = p[4]
 			if typ&0x80 == 0 {
 				return &DecodingError{len(data) - len(p) + 4, "bad symbol type", typ}
 			}
 			typ &^= 0x80
 			s.typ = typ
 			p = p[5:]
 		}

 		// Name.
 		var i int
 		var nnul int
 		for i = 0; i < len(p); i++ {
 			if p[i] == 0 {
 				nnul = 1
 				break
 			}
 		}
 		switch typ {
 		case 'z', 'Z':
 			p = p[i+nnul:]
 			for i = 0; i+2 <= len(p); i += 2 {
 				if p[i] == 0 && p[i+1] == 0 {
 					nnul = 2
 					break
 				}
 			}
 		}
 		if len(p) < i+nnul {
 			return &DecodingError{len(data), "unexpected EOF", nil}
 		}
 		s.name = p[0:i]
 		i += nnul
 		p = p[i:]

 		if !newTable {
 			if len(p) < 4 {
 				return &DecodingError{len(data), "unexpected EOF", nil}
 			}
 			// Go type.
 			s.gotype = uint64(order.Uint32(p[:4]))
 			p = p[4:]
 		}
 		fn(s)
 	}
 	return nil
 }

 // NewTable decodes the Go symbol table (the ".gosymtab" section in ELF),
 // returning an in-memory representation.
 // Starting with Go 1.3, the Go symbol table no longer includes symbol data.
 func NewTable(symtab []byte, pcln *LineTable) (*Table, error) {
 	var n int
 	err := walksymtab(symtab, func(s sym) error {
 		n++
 		return nil
 	})
 	if err != nil {
 		return nil, err
 	}

 	var t Table
 	if pcln.isGo12() {
 		t.go12line = pcln
 	}
 	fname := make(map[uint16]string)
 	t.Syms = make([]Sym, 0, n)
 	nf := 0
 	nz := 0
 	lasttyp := uint8(0)
 	err = walksymtab(symtab, func(s sym) error {
 		n := len(t.Syms)
 		t.Syms = t.Syms[0 : n+1]
 		ts := &t.Syms[n]
 		ts.Type = s.typ
 		ts.Value = s.value
 		ts.GoType = s.gotype
 		switch s.typ {
 		default:
 			// rewrite name to use . instead of · (c2 b7)
 			w := 0
 			b := s.name
 			for i := 0; i < len(b); i++ {
 				if b[i] == 0xc2 && i+1 < len(b) && b[i+1] == 0xb7 {
 					i++
 					b[i] = '.'
 				}
 				b[w] = b[i]
 				w++
 			}
 			ts.Name = string(s.name[0:w])
 		case 'z', 'Z':
 			if lasttyp != 'z' && lasttyp != 'Z' {
 				nz++
 			}
 			for i := 0; i < len(s.name); i += 2 {
 				eltIdx := binary.BigEndian.Uint16(s.name[i : i+2])
 				elt, ok := fname[eltIdx]
 				if !ok {
 					return &DecodingError{-1, "bad filename code", eltIdx}
 				}
 				if n := len(ts.Name); n > 0 && ts.Name[n-1] != '/' {
 					ts.Name += "/"
 				}
 				ts.Name += elt
 			}
 		}
 		switch s.typ {
 		case 'T', 't', 'L', 'l':
 			nf++
 		case 'f':
 			fname[uint16(s.value)] = ts.Name
 		}
 		lasttyp = s.typ
 		return nil
 	})
 	if err != nil {
 		return nil, err
 	}

 	t.Funcs = make([]Func, 0, nf)
 	t.Files = make(map[string]*Obj)

 	var obj *Obj
 	if t.go12line != nil {
 		// Put all functions into one Obj.
 		t.Objs = make([]Obj, 1)
 		obj = &t.Objs[0]
 		t.go12line.go12MapFiles(t.Files, obj)
 	} else {
 		t.Objs = make([]Obj, 0, nz)
 	}

 	// Count text symbols and attach frame sizes, parameters, and
 	// locals to them. Also, find object file boundaries.
 	lastf := 0
 	for i := 0; i < len(t.Syms); i++ {
 		sym := &t.Syms[i]
 		switch sym.Type {
 		case 'Z', 'z': // path symbol
 			if t.go12line != nil {
 				// Go 1.2 binaries have the file information elsewhere. Ignore.
 				break
 			}
 			// Finish the current object
 			if obj != nil {
 				obj.Funcs = t.Funcs[lastf:]
 			}
 			lastf = len(t.Funcs)

 			// Start new object
 			n := len(t.Objs)
 			t.Objs = t.Objs[0 : n+1]
 			obj = &t.Objs[n]

 			// Count & copy path symbols
 			var end int
 			for end = i + 1; end < len(t.Syms); end++ {
 				if c := t.Syms[end].Type; c != 'Z' && c != 'z' {
 					break
 				}
 			}
 			obj.Paths = t.Syms[i:end]
 			i = end - 1 // loop will i++

 			// Record file names
 			depth := 0
 			for j := range obj.Paths {
 				s := &obj.Paths[j]
 				if s.Name == "" {
 					depth--
 				} else {
 					if depth == 0 {
 						t.Files[s.Name] = obj
 					}
 					depth++
 				}
 			}

 		case 'T', 't', 'L', 'l': // text symbol
 			if n := len(t.Funcs); n > 0 {
 				t.Funcs[n-1].End = sym.Value
 			}
 			if sym.Name == "runtime.etext" || sym.Name == "etext" {
 				continue
 			}

 			// Count parameter and local (auto) syms
 			var np, na int
 			var end int
 		countloop:
 			for end = i + 1; end < len(t.Syms); end++ {
 				switch t.Syms[end].Type {
 				case 'T', 't', 'L', 'l', 'Z', 'z':
 					break countloop
 				case 'p':
 					np++
 				case 'a':
 					na++
 				}
 			}

 			// Fill in the function symbol
 			n := len(t.Funcs)
 			t.Funcs = t.Funcs[0 : n+1]
 			fn := &t.Funcs[n]
 			sym.Func = fn
 			fn.Params = make([]*Sym, 0, np)
 			fn.Locals = make([]*Sym, 0, na)
 			fn.Sym = sym
 			fn.Entry = sym.Value
 			fn.Obj = obj
 			if t.go12line != nil {
 				// All functions share the same line table.
 				// It knows how to narrow down to a specific
 				// function quickly.
 				fn.LineTable = t.go12line
 			} else if pcln != nil {
 				fn.LineTable = pcln.slice(fn.Entry)
 				pcln = fn.LineTable
 			}
 			for j := i; j < end; j++ {
 				s := &t.Syms[j]
 				switch s.Type {
 				case 'm':
 					fn.FrameSize = int(s.Value)
 				case 'p':
 					n := len(fn.Params)
 					fn.Params = fn.Params[0 : n+1]
 					fn.Params[n] = s
 				case 'a':
 					n := len(fn.Locals)
 					fn.Locals = fn.Locals[0 : n+1]
 					fn.Locals[n] = s
 				}
 			}
 			i = end - 1 // loop will i++
 		}
 	}

 	if t.go12line != nil && nf == 0 {
 		t.Funcs = t.go12line.go12Funcs()
 	}
 	if obj != nil {
 		obj.Funcs = t.Funcs[lastf:]
 	}
 	return &t, nil
 }

 // PCToFunc returns the function containing the program counter pc,
 // or nil if there is no such function.
 func (t *Table) PCToFunc(pc uint64) *Func {
 	funcs := t.Funcs
 	for len(funcs) > 0 {
 		m := len(funcs) / 2
 		fn := &funcs[m]
 		switch {
 		case pc < fn.Entry:
 			funcs = funcs[0:m]
 		case fn.Entry <= pc && pc < fn.End:
 			return fn
 		default:
 			funcs = funcs[m+1:]
 		}
 	}
 	return nil
 }

 // PCToLine looks up line number information for a program counter.
 // If there is no information, it returns fn == nil.
 func (t *Table) PCToLine(pc uint64) (file string, line int, fn *Func) {
 	if fn = t.PCToFunc(pc); fn == nil {
 		return
 	}
 	if t.go12line != nil {
 		file = t.go12line.go12PCToFile(pc)
 		line = t.go12line.go12PCToLine(pc)
 	} else {
 		file, line = fn.Obj.lineFromAline(fn.LineTable.PCToLine(pc))
 	}
 	return
 }

 // LineToPC looks up the first program counter on the given line in
 // the named file. It returns UnknownPathError or UnknownLineError if
 // there is an error looking up this line.
 func (t *Table) LineToPC(file string, line int) (pc uint64, fn *Func, err error) {
 	obj, ok := t.Files[file]
 	if !ok {
 		return 0, nil, UnknownFileError(file)
 	}

 	if t.go12line != nil {
 		pc := t.go12line.go12LineToPC(file, line)
 		if pc == 0 {
 			return 0, nil, &UnknownLineError{file, line}
 		}
 		return pc, t.PCToFunc(pc), nil
 	}

 	abs, err := obj.alineFromLine(file, line)
 	if err != nil {
 		return
 	}
 	for i := range obj.Funcs {
 		f := &obj.Funcs[i]
 		pc := f.LineTable.LineToPC(abs, f.End)
 		if pc != 0 {
 			return pc, f, nil
 		}
 	}
 	return 0, nil, &UnknownLineError{file, line}
 }

 // LookupSym returns the text, data, or bss symbol with the given name,
 // or nil if no such symbol is found.
 func (t *Table) LookupSym(name string) *Sym {
 	// TODO(austin) Maybe make a map
 	for i := range t.Syms {
 		s := &t.Syms[i]
 		switch s.Type {
 		case 'T', 't', 'L', 'l', 'D', 'd', 'B', 'b':
 			if s.Name == name {
 				return s
 			}
 		}
 	}
 	return nil
 }

 // LookupFunc returns the text, data, or bss symbol with the given name,
 // or nil if no such symbol is found.
 func (t *Table) LookupFunc(name string) *Func {
 	for i := range t.Funcs {
 		f := &t.Funcs[i]
 		if f.Sym.Name == name {
 			return f
 		}
 	}
 	return nil
 }

 // SymByAddr returns the text, data, or bss symbol starting at the given address.
 func (t *Table) SymByAddr(addr uint64) *Sym {
 	for i := range t.Syms {
 		s := &t.Syms[i]
 		switch s.Type {
 		case 'T', 't', 'L', 'l', 'D', 'd', 'B', 'b':
 			if s.Value == addr {
 				return s
 			}
 		}
 	}
 	return nil
 }

 /*
  * Object files
  */

 // This is legacy code for Go 1.1 and earlier, which used the
 // Plan 9 format for pc-line tables. This code was never quite
 // correct. It's probably very close, and it's usually correct, but
 // we never quite found all the corner cases.
 //
 // Go 1.2 and later use a simpler format, documented at golang.org/s/go12symtab.

 func (o *Obj) lineFromAline(aline int) (string, int) {
 	type stackEnt struct {
 		path   string
 		start  int
 		offset int
 		prev   *stackEnt
 	}

 	noPath := &stackEnt{"", 0, 0, nil}
 	tos := noPath

 pathloop:
 	for _, s := range o.Paths {
 		val := int(s.Value)
 		switch {
 		case val > aline:
 			break pathloop

 		case val == 1:
 			// Start a new stack
 			tos = &stackEnt{s.Name, val, 0, noPath}

 		case s.Name == "":
 			// Pop
 			if tos == noPath {
 				return "<malformed symbol table>", 0
 			}
 			tos.prev.offset += val - tos.start
 			tos = tos.prev

 		default:
 			// Push
 			tos = &stackEnt{s.Name, val, 0, tos}
 		}
 	}

 	if tos == noPath {
 		return "", 0
 	}
 	return tos.path, aline - tos.start - tos.offset + 1
 }

 func (o *Obj) alineFromLine(path string, line int) (int, error) {
 	if line < 1 {
 		return 0, &UnknownLineError{path, line}
 	}

 	for i, s := range o.Paths {
 		// Find this path
 		if s.Name != path {
 			continue
 		}

 		// Find this line at this stack level
 		depth := 0
 		var incstart int
 		line += int(s.Value)
 	pathloop:
 		for _, s := range o.Paths[i:] {
 			val := int(s.Value)
 			switch {
 			case depth == 1 && val >= line:
 				return line - 1, nil

 			case s.Name == "":
 				depth--
 				if depth == 0 {
 					break pathloop
 				} else if depth == 1 {
 					line += val - incstart
 				}

 			default:
 				if depth == 1 {
 					incstart = val
 				}
 				depth++
 			}
 		}
 		return 0, &UnknownLineError{path, line}
 	}
 	return 0, UnknownFileError(path)
 }

 /*
  * Errors
  */

 // UnknownFileError represents a failure to find the specific file in
 // the symbol table.
 type UnknownFileError string

 func (e UnknownFileError) Error() string { return "unknown file: " + string(e) }

 // UnknownLineError represents a failure to map a line to a program
 // counter, either because the line is beyond the bounds of the file
 // or because there is no code on the given line.
 type UnknownLineError struct {
 	File string
 	Line int
 }

 func (e *UnknownLineError) Error() string {
 	return "no code at " + e.File + ":" + strconv.Itoa(e.Line)
 }

 // DecodingError represents an error during the decoding of
 // the symbol table.
 type DecodingError struct {
 	off int
 	msg string
 	val interface{}
 }

 func (e *DecodingError) Error() string {
 	msg := e.msg
 	if e.val != nil {
 		msg += fmt.Sprintf(" '%v'", e.val)
 	}
 	msg += fmt.Sprintf(" at byte %#x", e.off)
 	return msg
 }
	// Copyright 2009 The Go Authors. All rights reserved.
	// Use of this source code is governed by a BSD-style
	// license that can be found in the LICENSE file.

	// Package gosym implements access to the Go symbol
	// and line number tables embedded in Go binaries generated
	// by the gc compilers.
	package gosym

	import (
	"bytes"
	"encoding/binary"
	"fmt"
	"strconv"
	"strings"
	)

	/*
	* Symbols
	*/

	// A Sym represents a single symbol table entry.
	type Sym struct {
	Value uint64
	Type byte
	Name string
	GoType uint64
	// If this symbol is a function symbol, the corresponding Func
	Func *Func
	}

	// Static reports whether this symbol is static (not visible outside its file).
	func (s *Sym) Static() bool { return s.Type >= 'a' }

	// nameWithoutInst returns s.Name if s.Name has no brackets (does not reference an
	// instantiated type, function, or method). If s.Name contains brackets, then it
	// returns s.Name with all the contents between (and including) the outermost left
	// and right bracket removed. This is useful to ignore any extra slashes or dots
	// inside the brackets from the string searches below, where needed.
	func (s *Sym) nameWithoutInst() string {
	start := strings.Index(s.Name, "[")
	if start < 0 {
	return s.Name
	}
	end := strings.LastIndex(s.Name, "]")
	if end < 0 {
	// Malformed name, should contain closing bracket too.
	return s.Name
	}
	return s.Name[0:start] + s.Name[end+1:]
	}

	// PackageName returns the package part of the symbol name,
	// or the empty string if there is none.
	func (s *Sym) PackageName() string {
	name := s.nameWithoutInst()

	// A prefix of "type." and "go." is a compiler-generated symbol that doesn't belong to any package.
	// See variable reservedimports in cmd/compile/internal/gc/subr.go
	if strings.HasPrefix(name, "go.") \|\| strings.HasPrefix(name, "type.") {
	return ""
	}

	pathend := strings.LastIndex(name, "/")
	if pathend < 0 {
	pathend = 0
	}

	if i := strings.Index(name[pathend:], "."); i != -1 {
	return name[:pathend+i]
	}
	return ""
	}

	// ReceiverName returns the receiver type name of this symbol,
	// or the empty string if there is none. A receiver name is only detected in
	// the case that s.Name is fully-specified with a package name.
	func (s *Sym) ReceiverName() string {
	name := s.nameWithoutInst()
	// If we find a slash in name, it should precede any bracketed expression
	// that was removed, so pathend will apply correctly to name and s.Name.
	pathend := strings.LastIndex(name, "/")
	if pathend < 0 {
	pathend = 0
	}
	// Find the first dot after pathend (or from the beginning, if there was
	// no slash in name).
	l := strings.Index(name[pathend:], ".")
	// Find the last dot after pathend (or the beginnng).
	r := strings.LastIndex(name[pathend:], ".")
	if l == -1 \|\| r == -1 \|\| l == r {
	// There is no receiver if we didn't find two distinct dots after pathend.
	return ""
	}
	// Given there is a trailing '.' that is in name, find it now in s.Name.
	// pathend+l should apply to s.Name, because it should be the dot in the
	// package name.
	r = strings.LastIndex(s.Name[pathend:], ".")
	return s.Name[pathend+l+1 : pathend+r]
	}

	// BaseName returns the symbol name without the package or receiver name.
	func (s *Sym) BaseName() string {
	name := s.nameWithoutInst()
	if i := strings.LastIndex(name, "."); i != -1 {
	if s.Name != name {
	brack := strings.Index(s.Name, "[")
	if i > brack {
	// BaseName is a method name after the brackets, so
	// recalculate for s.Name. Otherwise, i applies
	// correctly to s.Name, since it is before the
	// brackets.
	i = strings.LastIndex(s.Name, ".")
	}
	}
	return s.Name[i+1:]
	}
	return s.Name
	}

	// A Func collects information about a single function.
	type Func struct {
	Entry uint64
	*Sym
	End uint64
	Params []*Sym // nil for Go 1.3 and later binaries
	Locals []*Sym // nil for Go 1.3 and later binaries
	FrameSize int
	LineTable *LineTable
	Obj *Obj
	}

	// An Obj represents a collection of functions in a symbol table.
	//
	// The exact method of division of a binary into separate Objs is an internal detail
	// of the symbol table format.
	//
	// In early versions of Go each source file became a different Obj.
	//
	// In Go 1 and Go 1.1, each package produced one Obj for all Go sources
	// and one Obj per C source file.
	//
	// In Go 1.2, there is a single Obj for the entire program.
	type Obj struct {
	// Funcs is a list of functions in the Obj.
	Funcs []Func

	// In Go 1.1 and earlier, Paths is a list of symbols corresponding
	// to the source file names that produced the Obj.
	// In Go 1.2, Paths is nil.
	// Use the keys of Table.Files to obtain a list of source files.
	Paths []Sym // meta
	}

	/*
	* Symbol tables
	*/

	// Table represents a Go symbol table. It stores all of the
	// symbols decoded from the program and provides methods to translate
	// between symbols, names, and addresses.
	type Table struct {
	Syms []Sym // nil for Go 1.3 and later binaries
	Funcs []Func
	Files map[string]*Obj // for Go 1.2 and later all files map to one Obj
	Objs []Obj // for Go 1.2 and later only one Obj in slice

	go12line *LineTable // Go 1.2 line number table
	}

	type sym struct {
	value uint64
	gotype uint64
	typ byte
	name []byte
	}

	var (
	littleEndianSymtab = []byte{0xFD, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00}
	bigEndianSymtab = []byte{0xFF, 0xFF, 0xFF, 0xFD, 0x00, 0x00, 0x00}
	oldLittleEndianSymtab = []byte{0xFE, 0xFF, 0xFF, 0xFF, 0x00, 0x00}
	)

	func walksymtab(data []byte, fn func(sym) error) error {
	if len(data) == 0 { // missing symtab is okay
	return nil
	}
	var order binary.ByteOrder = binary.BigEndian
	newTable := false
	switch {
	case bytes.HasPrefix(data, oldLittleEndianSymtab):
	// Same as Go 1.0, but little endian.
	// Format was used during interim development between Go 1.0 and Go 1.1.
	// Should not be widespread, but easy to support.
	data = data[6:]
	order = binary.LittleEndian
	case bytes.HasPrefix(data, bigEndianSymtab):
	newTable = true
	case bytes.HasPrefix(data, littleEndianSymtab):
	newTable = true
	order = binary.LittleEndian
	}
	var ptrsz int
	if newTable {
	if len(data) < 8 {
	return &DecodingError{len(data), "unexpected EOF", nil}
	}
	ptrsz = int(data[7])
	if ptrsz != 4 && ptrsz != 8 {
	return &DecodingError{7, "invalid pointer size", ptrsz}
	}
	data = data[8:]
	}
	var s sym
	p := data
	for len(p) >= 4 {
	var typ byte
	if newTable {
	// Symbol type, value, Go type.
	typ = p[0] & 0x3F
	wideValue := p[0]&0x40 != 0
	goType := p[0]&0x80 != 0
	if typ < 26 {
	typ += 'A'
	} else {
	typ += 'a' - 26
	}
	s.typ = typ
	p = p[1:]
	if wideValue {
	if len(p) < ptrsz {
	return &DecodingError{len(data), "unexpected EOF", nil}
	}
	// fixed-width value
	if ptrsz == 8 {
	s.value = order.Uint64(p[0:8])
	p = p[8:]
	} else {
	s.value = uint64(order.Uint32(p[0:4]))
	p = p[4:]
	}
	} else {
	// varint value
	s.value = 0
	shift := uint(0)
	for len(p) > 0 && p[0]&0x80 != 0 {
	s.value \|= uint64(p[0]&0x7F) << shift
	shift += 7
	p = p[1:]
	}
	if len(p) == 0 {
	return &DecodingError{len(data), "unexpected EOF", nil}
	}
	s.value \|= uint64(p[0]) << shift
	p = p[1:]
	}
	if goType {
	if len(p) < ptrsz {
	return &DecodingError{len(data), "unexpected EOF", nil}
	}
	// fixed-width go type
	if ptrsz == 8 {
	s.gotype = order.Uint64(p[0:8])
	p = p[8:]
	} else {
	s.gotype = uint64(order.Uint32(p[0:4]))
	p = p[4:]
	}
	}
	} else {
	// Value, symbol type.
	s.value = uint64(order.Uint32(p[0:4]))
	if len(p) < 5 {
	return &DecodingError{len(data), "unexpected EOF", nil}
	}
	typ = p[4]
	if typ&0x80 == 0 {
	return &DecodingError{len(data) - len(p) + 4, "bad symbol type", typ}
	}
	typ &^= 0x80
	s.typ = typ
	p = p[5:]
	}

	// Name.
	var i int
	var nnul int
	for i = 0; i < len(p); i++ {
	if p[i] == 0 {
	nnul = 1
	break
	}
	}
	switch typ {
	case 'z', 'Z':
	p = p[i+nnul:]
	for i = 0; i+2 <= len(p); i += 2 {
	if p[i] == 0 && p[i+1] == 0 {
	nnul = 2
	break
	}
	}
	}
	if len(p) < i+nnul {
	return &DecodingError{len(data), "unexpected EOF", nil}
	}
	s.name = p[0:i]
	i += nnul
	p = p[i:]

	if !newTable {
	if len(p) < 4 {
	return &DecodingError{len(data), "unexpected EOF", nil}
	}
	// Go type.
	s.gotype = uint64(order.Uint32(p[:4]))
	p = p[4:]
	}
	fn(s)
	}
	return nil
	}

	// NewTable decodes the Go symbol table (the ".gosymtab" section in ELF),
	// returning an in-memory representation.
	// Starting with Go 1.3, the Go symbol table no longer includes symbol data.
	func NewTable(symtab []byte, pcln LineTable) (Table, error) {
	var n int
	err := walksymtab(symtab, func(s sym) error {
	n++
	return nil
	})
	if err != nil {
	return nil, err
	}

	var t Table
	if pcln.isGo12() {
	t.go12line = pcln
	}
	fname := make(map[uint16]string)
	t.Syms = make([]Sym, 0, n)
	nf := 0
	nz := 0
	lasttyp := uint8(0)
	err = walksymtab(symtab, func(s sym) error {
	n := len(t.Syms)
	t.Syms = t.Syms[0 : n+1]
	ts := &t.Syms[n]
	ts.Type = s.typ
	ts.Value = s.value
	ts.GoType = s.gotype
	switch s.typ {
	default:
	// rewrite name to use . instead of · (c2 b7)
	w := 0
	b := s.name
	for i := 0; i < len(b); i++ {
	if b[i] == 0xc2 && i+1 < len(b) && b[i+1] == 0xb7 {
	i++
	b[i] = '.'
	}
	b[w] = b[i]
	w++
	}
	ts.Name = string(s.name[0:w])
	case 'z', 'Z':
	if lasttyp != 'z' && lasttyp != 'Z' {
	nz++
	}
	for i := 0; i < len(s.name); i += 2 {
	eltIdx := binary.BigEndian.Uint16(s.name[i : i+2])
	elt, ok := fname[eltIdx]
	if !ok {
	return &DecodingError{-1, "bad filename code", eltIdx}
	}
	if n := len(ts.Name); n > 0 && ts.Name[n-1] != '/' {
	ts.Name += "/"
	}
	ts.Name += elt
	}
	}
	switch s.typ {
	case 'T', 't', 'L', 'l':
	nf++
	case 'f':
	fname[uint16(s.value)] = ts.Name
	}
	lasttyp = s.typ
	return nil
	})
	if err != nil {
	return nil, err
	}

	t.Funcs = make([]Func, 0, nf)
	t.Files = make(map[string]*Obj)

	var obj *Obj
	if t.go12line != nil {
	// Put all functions into one Obj.
	t.Objs = make([]Obj, 1)
	obj = &t.Objs[0]
	t.go12line.go12MapFiles(t.Files, obj)
	} else {
	t.Objs = make([]Obj, 0, nz)
	}

	// Count text symbols and attach frame sizes, parameters, and
	// locals to them. Also, find object file boundaries.
	lastf := 0
	for i := 0; i < len(t.Syms); i++ {
	sym := &t.Syms[i]
	switch sym.Type {
	case 'Z', 'z': // path symbol
	if t.go12line != nil {
	// Go 1.2 binaries have the file information elsewhere. Ignore.
	break
	}
	// Finish the current object
	if obj != nil {
	obj.Funcs = t.Funcs[lastf:]
	}
	lastf = len(t.Funcs)

	// Start new object
	n := len(t.Objs)
	t.Objs = t.Objs[0 : n+1]
	obj = &t.Objs[n]

	// Count & copy path symbols
	var end int
	for end = i + 1; end < len(t.Syms); end++ {
	if c := t.Syms[end].Type; c != 'Z' && c != 'z' {
	break
	}
	}
	obj.Paths = t.Syms[i:end]
	i = end - 1 // loop will i++

	// Record file names
	depth := 0
	for j := range obj.Paths {
	s := &obj.Paths[j]
	if s.Name == "" {
	depth--
	} else {
	if depth == 0 {
	t.Files[s.Name] = obj
	}
	depth++
	}
	}

	case 'T', 't', 'L', 'l': // text symbol
	if n := len(t.Funcs); n > 0 {
	t.Funcs[n-1].End = sym.Value
	}
	if sym.Name == "runtime.etext" \|\| sym.Name == "etext" {
	continue
	}

	// Count parameter and local (auto) syms
	var np, na int
	var end int
	countloop:
	for end = i + 1; end < len(t.Syms); end++ {
	switch t.Syms[end].Type {
	case 'T', 't', 'L', 'l', 'Z', 'z':
	break countloop
	case 'p':
	np++
	case 'a':
	na++
	}
	}

	// Fill in the function symbol
	n := len(t.Funcs)
	t.Funcs = t.Funcs[0 : n+1]
	fn := &t.Funcs[n]
	sym.Func = fn
	fn.Params = make([]*Sym, 0, np)
	fn.Locals = make([]*Sym, 0, na)
	fn.Sym = sym
	fn.Entry = sym.Value
	fn.Obj = obj
	if t.go12line != nil {
	// All functions share the same line table.
	// It knows how to narrow down to a specific
	// function quickly.
	fn.LineTable = t.go12line
	} else if pcln != nil {
	fn.LineTable = pcln.slice(fn.Entry)
	pcln = fn.LineTable
	}
	for j := i; j < end; j++ {
	s := &t.Syms[j]
	switch s.Type {
	case 'm':
	fn.FrameSize = int(s.Value)
	case 'p':
	n := len(fn.Params)
	fn.Params = fn.Params[0 : n+1]
	fn.Params[n] = s
	case 'a':
	n := len(fn.Locals)
	fn.Locals = fn.Locals[0 : n+1]
	fn.Locals[n] = s
	}
	}
	i = end - 1 // loop will i++
	}
	}

	if t.go12line != nil && nf == 0 {
	t.Funcs = t.go12line.go12Funcs()
	}
	if obj != nil {
	obj.Funcs = t.Funcs[lastf:]
	}
	return &t, nil
	}

	// PCToFunc returns the function containing the program counter pc,
	// or nil if there is no such function.
	func (t Table) PCToFunc(pc uint64) Func {
	funcs := t.Funcs
	for len(funcs) > 0 {
	m := len(funcs) / 2
	fn := &funcs[m]
	switch {
	case pc < fn.Entry:
	funcs = funcs[0:m]
	case fn.Entry <= pc && pc < fn.End:
	return fn
	default:
	funcs = funcs[m+1:]
	}
	}
	return nil
	}

	// PCToLine looks up line number information for a program counter.
	// If there is no information, it returns fn == nil.
	func (t Table) PCToLine(pc uint64) (file string, line int, fn Func) {
	if fn = t.PCToFunc(pc); fn == nil {
	return
	}
	if t.go12line != nil {
	file = t.go12line.go12PCToFile(pc)
	line = t.go12line.go12PCToLine(pc)
	} else {
	file, line = fn.Obj.lineFromAline(fn.LineTable.PCToLine(pc))
	}
	return
	}

	// LineToPC looks up the first program counter on the given line in
	// the named file. It returns UnknownPathError or UnknownLineError if
	// there is an error looking up this line.
	func (t Table) LineToPC(file string, line int) (pc uint64, fn Func, err error) {
	obj, ok := t.Files[file]
	if !ok {
	return 0, nil, UnknownFileError(file)
	}

	if t.go12line != nil {
	pc := t.go12line.go12LineToPC(file, line)
	if pc == 0 {
	return 0, nil, &UnknownLineError{file, line}
	}
	return pc, t.PCToFunc(pc), nil
	}

	abs, err := obj.alineFromLine(file, line)
	if err != nil {
	return
	}
	for i := range obj.Funcs {
	f := &obj.Funcs[i]
	pc := f.LineTable.LineToPC(abs, f.End)
	if pc != 0 {
	return pc, f, nil
	}
	}
	return 0, nil, &UnknownLineError{file, line}
	}

	// LookupSym returns the text, data, or bss symbol with the given name,
	// or nil if no such symbol is found.
	func (t Table) LookupSym(name string) Sym {
	// TODO(austin) Maybe make a map
	for i := range t.Syms {
	s := &t.Syms[i]
	switch s.Type {
	case 'T', 't', 'L', 'l', 'D', 'd', 'B', 'b':
	if s.Name == name {
	return s
	}
	}
	}
	return nil
	}

	// LookupFunc returns the text, data, or bss symbol with the given name,
	// or nil if no such symbol is found.
	func (t Table) LookupFunc(name string) Func {
	for i := range t.Funcs {
	f := &t.Funcs[i]
	if f.Sym.Name == name {
	return f
	}
	}
	return nil
	}

	// SymByAddr returns the text, data, or bss symbol starting at the given address.
	func (t Table) SymByAddr(addr uint64) Sym {
	for i := range t.Syms {
	s := &t.Syms[i]
	switch s.Type {
	case 'T', 't', 'L', 'l', 'D', 'd', 'B', 'b':
	if s.Value == addr {
	return s
	}
	}
	}
	return nil
	}

	/*
	* Object files
	*/

	// This is legacy code for Go 1.1 and earlier, which used the
	// Plan 9 format for pc-line tables. This code was never quite
	// correct. It's probably very close, and it's usually correct, but
	// we never quite found all the corner cases.
	//
	// Go 1.2 and later use a simpler format, documented at golang.org/s/go12symtab.

	func (o *Obj) lineFromAline(aline int) (string, int) {
	type stackEnt struct {
	path string
	start int
	offset int
	prev *stackEnt
	}

	noPath := &stackEnt{"", 0, 0, nil}
	tos := noPath

	pathloop:
	for _, s := range o.Paths {
	val := int(s.Value)
	switch {
	case val > aline:
	break pathloop

	case val == 1:
	// Start a new stack
	tos = &stackEnt{s.Name, val, 0, noPath}

	case s.Name == "":
	// Pop
	if tos == noPath {
	return "<malformed symbol table>", 0
	}
	tos.prev.offset += val - tos.start
	tos = tos.prev

	default:
	// Push
	tos = &stackEnt{s.Name, val, 0, tos}
	}
	}

	if tos == noPath {
	return "", 0
	}
	return tos.path, aline - tos.start - tos.offset + 1
	}

	func (o *Obj) alineFromLine(path string, line int) (int, error) {
	if line < 1 {
	return 0, &UnknownLineError{path, line}
	}

	for i, s := range o.Paths {
	// Find this path
	if s.Name != path {
	continue
	}

	// Find this line at this stack level
	depth := 0
	var incstart int
	line += int(s.Value)
	pathloop:
	for _, s := range o.Paths[i:] {
	val := int(s.Value)
	switch {
	case depth == 1 && val >= line:
	return line - 1, nil

	case s.Name == "":
	depth--
	if depth == 0 {
	break pathloop
	} else if depth == 1 {
	line += val - incstart
	}

	default:
	if depth == 1 {
	incstart = val
	}
	depth++
	}
	}
	return 0, &UnknownLineError{path, line}
	}
	return 0, UnknownFileError(path)
	}

	/*
	* Errors
	*/

	// UnknownFileError represents a failure to find the specific file in
	// the symbol table.
	type UnknownFileError string

	func (e UnknownFileError) Error() string { return "unknown file: " + string(e) }

	// UnknownLineError represents a failure to map a line to a program
	// counter, either because the line is beyond the bounds of the file
	// or because there is no code on the given line.
	type UnknownLineError struct {
	File string
	Line int
	}

	func (e *UnknownLineError) Error() string {
	return "no code at " + e.File + ":" + strconv.Itoa(e.Line)
	}

	// DecodingError represents an error during the decoding of
	// the symbol table.
	type DecodingError struct {
	off int
	msg string
	val interface{}
	}

	func (e *DecodingError) Error() string {
	msg := e.msg
	if e.val != nil {
	msg += fmt.Sprintf(" '%v'", e.val)
	}
	msg += fmt.Sprintf(" at byte %#x", e.off)
	return msg
	}