| // Copyright © 2015 The Go Authors. All rights reserved. |
| // |
| // Permission is hereby granted, free of charge, to any person obtaining a copy |
| // of this software and associated documentation files (the "Software"), to deal |
| // in the Software without restriction, including without limitation the rights |
| // to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| // copies of the Software, and to permit persons to whom the Software is |
| // furnished to do so, subject to the following conditions: |
| // |
| // The above copyright notice and this permission notice shall be included in |
| // all copies or substantial portions of the Software. |
| // |
| // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| // IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| // FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| // AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| // LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| // OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| // THE SOFTWARE. |
| |
| package riscv |
| |
| import ( |
| "cmd/internal/obj" |
| "cmd/internal/objabi" |
| "cmd/internal/sys" |
| "fmt" |
| ) |
| |
| func buildop(ctxt *obj.Link) {} |
| |
| // jalrToSym replaces p with a set of Progs needed to jump to the Sym in p. |
| // lr is the link register to use for the JALR. |
| // p must be a CALL, JMP or RET. |
| func jalrToSym(ctxt *obj.Link, p *obj.Prog, newprog obj.ProgAlloc, lr int16) *obj.Prog { |
| if p.As != obj.ACALL && p.As != obj.AJMP && p.As != obj.ARET && p.As != obj.ADUFFZERO && p.As != obj.ADUFFCOPY { |
| ctxt.Diag("unexpected Prog in jalrToSym: %v", p) |
| return p |
| } |
| |
| // TODO(jsing): Consider using a single JAL instruction and teaching |
| // the linker to provide trampolines for the case where the destination |
| // offset is too large. This would potentially reduce instructions for |
| // the common case, but would require three instructions to go via the |
| // trampoline. |
| |
| to := p.To |
| |
| p.As = AAUIPC |
| p.Mark |= NEED_PCREL_ITYPE_RELOC |
| p.SetFrom3(obj.Addr{Type: obj.TYPE_CONST, Offset: to.Offset, Sym: to.Sym}) |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: 0} |
| p.Reg = 0 |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p = obj.Appendp(p, newprog) |
| |
| // Leave Sym only for the CALL reloc in assemble. |
| p.As = AJALR |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = lr |
| p.Reg = 0 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = REG_TMP |
| p.To.Sym = to.Sym |
| |
| return p |
| } |
| |
| // progedit is called individually for each *obj.Prog. It normalizes instruction |
| // formats and eliminates as many pseudo-instructions as possible. |
| func progedit(ctxt *obj.Link, p *obj.Prog, newprog obj.ProgAlloc) { |
| |
| // Expand binary instructions to ternary ones. |
| if p.Reg == 0 { |
| switch p.As { |
| case AADDI, ASLTI, ASLTIU, AANDI, AORI, AXORI, ASLLI, ASRLI, ASRAI, |
| AADD, AAND, AOR, AXOR, ASLL, ASRL, ASUB, ASRA, |
| AMUL, AMULH, AMULHU, AMULHSU, AMULW, ADIV, ADIVU, ADIVW, ADIVUW, |
| AREM, AREMU, AREMW, AREMUW: |
| p.Reg = p.To.Reg |
| } |
| } |
| |
| // Rewrite instructions with constant operands to refer to the immediate |
| // form of the instruction. |
| if p.From.Type == obj.TYPE_CONST { |
| switch p.As { |
| case AADD: |
| p.As = AADDI |
| case ASLT: |
| p.As = ASLTI |
| case ASLTU: |
| p.As = ASLTIU |
| case AAND: |
| p.As = AANDI |
| case AOR: |
| p.As = AORI |
| case AXOR: |
| p.As = AXORI |
| case ASLL: |
| p.As = ASLLI |
| case ASRL: |
| p.As = ASRLI |
| case ASRA: |
| p.As = ASRAI |
| } |
| } |
| |
| switch p.As { |
| case obj.AJMP: |
| // Turn JMP into JAL ZERO or JALR ZERO. |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = REG_ZERO |
| |
| switch p.To.Type { |
| case obj.TYPE_BRANCH: |
| p.As = AJAL |
| case obj.TYPE_MEM: |
| switch p.To.Name { |
| case obj.NAME_NONE: |
| p.As = AJALR |
| case obj.NAME_EXTERN: |
| // Handled in preprocess. |
| default: |
| ctxt.Diag("unsupported name %d for %v", p.To.Name, p) |
| } |
| default: |
| panic(fmt.Sprintf("unhandled type %+v", p.To.Type)) |
| } |
| |
| case obj.ACALL: |
| switch p.To.Type { |
| case obj.TYPE_MEM: |
| // Handled in preprocess. |
| case obj.TYPE_REG: |
| p.As = AJALR |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = REG_LR |
| default: |
| ctxt.Diag("unknown destination type %+v in CALL: %v", p.To.Type, p) |
| } |
| |
| case obj.AUNDEF: |
| p.As = AEBREAK |
| |
| case ASCALL: |
| // SCALL is the old name for ECALL. |
| p.As = AECALL |
| |
| case ASBREAK: |
| // SBREAK is the old name for EBREAK. |
| p.As = AEBREAK |
| } |
| } |
| |
| // addrToReg extracts the register from an Addr, handling special Addr.Names. |
| func addrToReg(a obj.Addr) int16 { |
| switch a.Name { |
| case obj.NAME_PARAM, obj.NAME_AUTO: |
| return REG_SP |
| } |
| return a.Reg |
| } |
| |
| // movToLoad converts a MOV mnemonic into the corresponding load instruction. |
| func movToLoad(mnemonic obj.As) obj.As { |
| switch mnemonic { |
| case AMOV: |
| return ALD |
| case AMOVB: |
| return ALB |
| case AMOVH: |
| return ALH |
| case AMOVW: |
| return ALW |
| case AMOVBU: |
| return ALBU |
| case AMOVHU: |
| return ALHU |
| case AMOVWU: |
| return ALWU |
| case AMOVF: |
| return AFLW |
| case AMOVD: |
| return AFLD |
| default: |
| panic(fmt.Sprintf("%+v is not a MOV", mnemonic)) |
| } |
| } |
| |
| // movToStore converts a MOV mnemonic into the corresponding store instruction. |
| func movToStore(mnemonic obj.As) obj.As { |
| switch mnemonic { |
| case AMOV: |
| return ASD |
| case AMOVB: |
| return ASB |
| case AMOVH: |
| return ASH |
| case AMOVW: |
| return ASW |
| case AMOVF: |
| return AFSW |
| case AMOVD: |
| return AFSD |
| default: |
| panic(fmt.Sprintf("%+v is not a MOV", mnemonic)) |
| } |
| } |
| |
| // rewriteMOV rewrites MOV pseudo-instructions. |
| func rewriteMOV(ctxt *obj.Link, newprog obj.ProgAlloc, p *obj.Prog) { |
| switch p.As { |
| case AMOV, AMOVB, AMOVH, AMOVW, AMOVBU, AMOVHU, AMOVWU, AMOVF, AMOVD: |
| default: |
| panic(fmt.Sprintf("%+v is not a MOV pseudo-instruction", p.As)) |
| } |
| |
| switch p.From.Type { |
| case obj.TYPE_MEM: // MOV c(Rs), Rd -> L $c, Rs, Rd |
| switch p.From.Name { |
| case obj.NAME_AUTO, obj.NAME_PARAM, obj.NAME_NONE: |
| if p.To.Type != obj.TYPE_REG { |
| ctxt.Diag("unsupported load at %v", p) |
| } |
| p.As = movToLoad(p.As) |
| p.From.Reg = addrToReg(p.From) |
| |
| case obj.NAME_EXTERN, obj.NAME_STATIC: |
| // AUIPC $off_hi, R |
| // L $off_lo, R |
| as := p.As |
| to := p.To |
| |
| p.As = AAUIPC |
| p.Mark |= NEED_PCREL_ITYPE_RELOC |
| p.SetFrom3(obj.Addr{Type: obj.TYPE_CONST, Offset: p.From.Offset, Sym: p.From.Sym}) |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: 0} |
| p.Reg = 0 |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: to.Reg} |
| p = obj.Appendp(p, newprog) |
| |
| p.As = movToLoad(as) |
| p.From = obj.Addr{Type: obj.TYPE_MEM, Reg: to.Reg, Offset: 0} |
| p.To = to |
| |
| default: |
| ctxt.Diag("unsupported name %d for %v", p.From.Name, p) |
| } |
| |
| case obj.TYPE_REG: |
| switch p.To.Type { |
| case obj.TYPE_REG: |
| switch p.As { |
| case AMOV, AMOVB, AMOVH, AMOVW, AMOVBU, AMOVHU, AMOVWU, AMOVF, AMOVD: |
| default: |
| ctxt.Diag("unsupported register-register move at %v", p) |
| } |
| |
| case obj.TYPE_MEM: // MOV Rs, c(Rd) -> S $c, Rs, Rd |
| switch p.As { |
| case AMOVBU, AMOVHU, AMOVWU: |
| ctxt.Diag("unsupported unsigned store at %v", p) |
| } |
| switch p.To.Name { |
| case obj.NAME_AUTO, obj.NAME_PARAM, obj.NAME_NONE: |
| p.As = movToStore(p.As) |
| p.To.Reg = addrToReg(p.To) |
| |
| case obj.NAME_EXTERN: |
| // AUIPC $off_hi, TMP |
| // S $off_lo, TMP, R |
| as := p.As |
| from := p.From |
| |
| p.As = AAUIPC |
| p.Mark |= NEED_PCREL_STYPE_RELOC |
| p.SetFrom3(obj.Addr{Type: obj.TYPE_CONST, Offset: p.To.Offset, Sym: p.To.Sym}) |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: 0} |
| p.Reg = 0 |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p = obj.Appendp(p, newprog) |
| |
| p.As = movToStore(as) |
| p.From = from |
| p.To = obj.Addr{Type: obj.TYPE_MEM, Reg: REG_TMP, Offset: 0} |
| |
| default: |
| ctxt.Diag("unsupported name %d for %v", p.From.Name, p) |
| } |
| |
| default: |
| ctxt.Diag("unsupported MOV at %v", p) |
| } |
| |
| case obj.TYPE_CONST: |
| // MOV $c, R |
| // If c is small enough, convert to: |
| // ADD $c, ZERO, R |
| // If not, convert to: |
| // LUI top20bits(c), R |
| // ADD bottom12bits(c), R, R |
| if p.As != AMOV { |
| ctxt.Diag("unsupported constant load at %v", p) |
| } |
| off := p.From.Offset |
| to := p.To |
| |
| low, high, err := Split32BitImmediate(off) |
| if err != nil { |
| ctxt.Diag("%v: constant %d too large: %v", p, off, err) |
| } |
| |
| // LUI is only necessary if the offset doesn't fit in 12-bits. |
| needLUI := high != 0 |
| if needLUI { |
| p.As = ALUI |
| p.To = to |
| // Pass top 20 bits to LUI. |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: high} |
| p = obj.Appendp(p, newprog) |
| } |
| p.As = AADDIW |
| p.To = to |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: low} |
| p.Reg = REG_ZERO |
| if needLUI { |
| p.Reg = to.Reg |
| } |
| |
| case obj.TYPE_ADDR: // MOV $sym+off(SP/SB), R |
| if p.To.Type != obj.TYPE_REG || p.As != AMOV { |
| ctxt.Diag("unsupported addr MOV at %v", p) |
| } |
| switch p.From.Name { |
| case obj.NAME_EXTERN, obj.NAME_STATIC: |
| // AUIPC $off_hi, R |
| // ADDI $off_lo, R |
| to := p.To |
| |
| p.As = AAUIPC |
| p.Mark |= NEED_PCREL_ITYPE_RELOC |
| p.SetFrom3(obj.Addr{Type: obj.TYPE_CONST, Offset: p.From.Offset, Sym: p.From.Sym}) |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: 0} |
| p.Reg = 0 |
| p.To = to |
| p = obj.Appendp(p, newprog) |
| |
| p.As = AADDI |
| p.From = obj.Addr{Type: obj.TYPE_CONST} |
| p.Reg = to.Reg |
| p.To = to |
| |
| case obj.NAME_PARAM, obj.NAME_AUTO: |
| p.As = AADDI |
| p.Reg = REG_SP |
| p.From.Type = obj.TYPE_CONST |
| |
| case obj.NAME_NONE: |
| p.As = AADDI |
| p.Reg = p.From.Reg |
| p.From.Type = obj.TYPE_CONST |
| p.From.Reg = 0 |
| |
| default: |
| ctxt.Diag("bad addr MOV from name %v at %v", p.From.Name, p) |
| } |
| |
| default: |
| ctxt.Diag("unsupported MOV at %v", p) |
| } |
| } |
| |
| // InvertBranch inverts the condition of a conditional branch. |
| func InvertBranch(as obj.As) obj.As { |
| switch as { |
| case ABEQ: |
| return ABNE |
| case ABEQZ: |
| return ABNEZ |
| case ABGE: |
| return ABLT |
| case ABGEU: |
| return ABLTU |
| case ABGEZ: |
| return ABLTZ |
| case ABGT: |
| return ABLE |
| case ABGTU: |
| return ABLEU |
| case ABGTZ: |
| return ABLEZ |
| case ABLE: |
| return ABGT |
| case ABLEU: |
| return ABGTU |
| case ABLEZ: |
| return ABGTZ |
| case ABLT: |
| return ABGE |
| case ABLTU: |
| return ABGEU |
| case ABLTZ: |
| return ABGEZ |
| case ABNE: |
| return ABEQ |
| case ABNEZ: |
| return ABEQZ |
| default: |
| panic("InvertBranch: not a branch") |
| } |
| } |
| |
| // containsCall reports whether the symbol contains a CALL (or equivalent) |
| // instruction. Must be called after progedit. |
| func containsCall(sym *obj.LSym) bool { |
| // CALLs are CALL or JAL(R) with link register LR. |
| for p := sym.Func().Text; p != nil; p = p.Link { |
| switch p.As { |
| case obj.ACALL, obj.ADUFFZERO, obj.ADUFFCOPY: |
| return true |
| case AJAL, AJALR: |
| if p.From.Type == obj.TYPE_REG && p.From.Reg == REG_LR { |
| return true |
| } |
| } |
| } |
| |
| return false |
| } |
| |
| // setPCs sets the Pc field in all instructions reachable from p. |
| // It uses pc as the initial value. |
| func setPCs(p *obj.Prog, pc int64) { |
| for ; p != nil; p = p.Link { |
| p.Pc = pc |
| for _, ins := range instructionsForProg(p) { |
| pc += int64(ins.length()) |
| } |
| } |
| } |
| |
| // stackOffset updates Addr offsets based on the current stack size. |
| // |
| // The stack looks like: |
| // ------------------- |
| // | | |
| // | PARAMs | |
| // | | |
| // | | |
| // ------------------- |
| // | Parent RA | SP on function entry |
| // ------------------- |
| // | | |
| // | | |
| // | AUTOs | |
| // | | |
| // | | |
| // ------------------- |
| // | RA | SP during function execution |
| // ------------------- |
| // |
| // FixedFrameSize makes other packages aware of the space allocated for RA. |
| // |
| // A nicer version of this diagram can be found on slide 21 of the presentation |
| // attached to: |
| // |
| // https://golang.org/issue/16922#issuecomment-243748180 |
| // |
| func stackOffset(a *obj.Addr, stacksize int64) { |
| switch a.Name { |
| case obj.NAME_AUTO: |
| // Adjust to the top of AUTOs. |
| a.Offset += stacksize |
| case obj.NAME_PARAM: |
| // Adjust to the bottom of PARAMs. |
| a.Offset += stacksize + 8 |
| } |
| } |
| |
| // preprocess generates prologue and epilogue code, computes PC-relative branch |
| // and jump offsets, and resolves pseudo-registers. |
| // |
| // preprocess is called once per linker symbol. |
| // |
| // When preprocess finishes, all instructions in the symbol are either |
| // concrete, real RISC-V instructions or directive pseudo-ops like TEXT, |
| // PCDATA, and FUNCDATA. |
| func preprocess(ctxt *obj.Link, cursym *obj.LSym, newprog obj.ProgAlloc) { |
| if cursym.Func().Text == nil || cursym.Func().Text.Link == nil { |
| return |
| } |
| |
| // Generate the prologue. |
| text := cursym.Func().Text |
| if text.As != obj.ATEXT { |
| ctxt.Diag("preprocess: found symbol that does not start with TEXT directive") |
| return |
| } |
| |
| stacksize := text.To.Offset |
| if stacksize == -8 { |
| // Historical way to mark NOFRAME. |
| text.From.Sym.Set(obj.AttrNoFrame, true) |
| stacksize = 0 |
| } |
| if stacksize < 0 { |
| ctxt.Diag("negative frame size %d - did you mean NOFRAME?", stacksize) |
| } |
| if text.From.Sym.NoFrame() { |
| if stacksize != 0 { |
| ctxt.Diag("NOFRAME functions must have a frame size of 0, not %d", stacksize) |
| } |
| } |
| |
| if !containsCall(cursym) { |
| text.From.Sym.Set(obj.AttrLeaf, true) |
| if stacksize == 0 { |
| // A leaf function with no locals has no frame. |
| text.From.Sym.Set(obj.AttrNoFrame, true) |
| } |
| } |
| |
| // Save LR unless there is no frame. |
| if !text.From.Sym.NoFrame() { |
| stacksize += ctxt.FixedFrameSize() |
| } |
| |
| cursym.Func().Args = text.To.Val.(int32) |
| cursym.Func().Locals = int32(stacksize) |
| |
| prologue := text |
| |
| if !cursym.Func().Text.From.Sym.NoSplit() { |
| prologue = stacksplit(ctxt, prologue, cursym, newprog, stacksize) // emit split check |
| } |
| |
| if stacksize != 0 { |
| prologue = ctxt.StartUnsafePoint(prologue, newprog) |
| |
| // Actually save LR. |
| prologue = obj.Appendp(prologue, newprog) |
| prologue.As = AMOV |
| prologue.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_LR} |
| prologue.To = obj.Addr{Type: obj.TYPE_MEM, Reg: REG_SP, Offset: -stacksize} |
| |
| // Insert stack adjustment. |
| prologue = obj.Appendp(prologue, newprog) |
| prologue.As = AADDI |
| prologue.From = obj.Addr{Type: obj.TYPE_CONST, Offset: -stacksize} |
| prologue.Reg = REG_SP |
| prologue.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_SP} |
| prologue.Spadj = int32(stacksize) |
| |
| prologue = ctxt.EndUnsafePoint(prologue, newprog, -1) |
| } |
| |
| if cursym.Func().Text.From.Sym.Wrapper() { |
| // if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame |
| // |
| // MOV g_panic(g), X11 |
| // BNE X11, ZERO, adjust |
| // end: |
| // NOP |
| // ...rest of function.. |
| // adjust: |
| // MOV panic_argp(X11), X12 |
| // ADD $(autosize+FIXED_FRAME), SP, X13 |
| // BNE X12, X13, end |
| // ADD $FIXED_FRAME, SP, X12 |
| // MOV X12, panic_argp(X11) |
| // JMP end |
| // |
| // The NOP is needed to give the jumps somewhere to land. |
| |
| ldpanic := obj.Appendp(prologue, newprog) |
| |
| ldpanic.As = AMOV |
| ldpanic.From = obj.Addr{Type: obj.TYPE_MEM, Reg: REGG, Offset: 4 * int64(ctxt.Arch.PtrSize)} // G.panic |
| ldpanic.Reg = 0 |
| ldpanic.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_X11} |
| |
| bneadj := obj.Appendp(ldpanic, newprog) |
| bneadj.As = ABNE |
| bneadj.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_X11} |
| bneadj.Reg = REG_ZERO |
| bneadj.To.Type = obj.TYPE_BRANCH |
| |
| endadj := obj.Appendp(bneadj, newprog) |
| endadj.As = obj.ANOP |
| |
| last := endadj |
| for last.Link != nil { |
| last = last.Link |
| } |
| |
| getargp := obj.Appendp(last, newprog) |
| getargp.As = AMOV |
| getargp.From = obj.Addr{Type: obj.TYPE_MEM, Reg: REG_X11, Offset: 0} // Panic.argp |
| getargp.Reg = 0 |
| getargp.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_X12} |
| |
| bneadj.To.SetTarget(getargp) |
| |
| calcargp := obj.Appendp(getargp, newprog) |
| calcargp.As = AADDI |
| calcargp.From = obj.Addr{Type: obj.TYPE_CONST, Offset: stacksize + ctxt.FixedFrameSize()} |
| calcargp.Reg = REG_SP |
| calcargp.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_X13} |
| |
| testargp := obj.Appendp(calcargp, newprog) |
| testargp.As = ABNE |
| testargp.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_X12} |
| testargp.Reg = REG_X13 |
| testargp.To.Type = obj.TYPE_BRANCH |
| testargp.To.SetTarget(endadj) |
| |
| adjargp := obj.Appendp(testargp, newprog) |
| adjargp.As = AADDI |
| adjargp.From = obj.Addr{Type: obj.TYPE_CONST, Offset: int64(ctxt.Arch.PtrSize)} |
| adjargp.Reg = REG_SP |
| adjargp.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_X12} |
| |
| setargp := obj.Appendp(adjargp, newprog) |
| setargp.As = AMOV |
| setargp.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_X12} |
| setargp.Reg = 0 |
| setargp.To = obj.Addr{Type: obj.TYPE_MEM, Reg: REG_X11, Offset: 0} // Panic.argp |
| |
| godone := obj.Appendp(setargp, newprog) |
| godone.As = AJAL |
| godone.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_ZERO} |
| godone.To.Type = obj.TYPE_BRANCH |
| godone.To.SetTarget(endadj) |
| } |
| |
| // Update stack-based offsets. |
| for p := cursym.Func().Text; p != nil; p = p.Link { |
| stackOffset(&p.From, stacksize) |
| stackOffset(&p.To, stacksize) |
| } |
| |
| // Additional instruction rewriting. |
| for p := cursym.Func().Text; p != nil; p = p.Link { |
| switch p.As { |
| case obj.AGETCALLERPC: |
| if cursym.Leaf() { |
| // MOV LR, Rd |
| p.As = AMOV |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = REG_LR |
| } else { |
| // MOV (RSP), Rd |
| p.As = AMOV |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = REG_SP |
| } |
| |
| case obj.ACALL, obj.ADUFFZERO, obj.ADUFFCOPY: |
| switch p.To.Type { |
| case obj.TYPE_MEM: |
| jalrToSym(ctxt, p, newprog, REG_LR) |
| } |
| |
| case obj.AJMP: |
| switch p.To.Type { |
| case obj.TYPE_MEM: |
| switch p.To.Name { |
| case obj.NAME_EXTERN: |
| // JMP to symbol. |
| jalrToSym(ctxt, p, newprog, REG_ZERO) |
| } |
| } |
| |
| case obj.ARET: |
| // Replace RET with epilogue. |
| retJMP := p.To.Sym |
| |
| if stacksize != 0 { |
| // Restore LR. |
| p.As = AMOV |
| p.From = obj.Addr{Type: obj.TYPE_MEM, Reg: REG_SP, Offset: 0} |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_LR} |
| p = obj.Appendp(p, newprog) |
| |
| p.As = AADDI |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: stacksize} |
| p.Reg = REG_SP |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_SP} |
| p.Spadj = int32(-stacksize) |
| p = obj.Appendp(p, newprog) |
| } |
| |
| if retJMP != nil { |
| p.As = obj.ARET |
| p.To.Sym = retJMP |
| p = jalrToSym(ctxt, p, newprog, REG_ZERO) |
| } else { |
| p.As = AJALR |
| p.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_ZERO} |
| p.Reg = 0 |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_LR} |
| } |
| |
| // "Add back" the stack removed in the previous instruction. |
| // |
| // This is to avoid confusing pctospadj, which sums |
| // Spadj from function entry to each PC, and shouldn't |
| // count adjustments from earlier epilogues, since they |
| // won't affect later PCs. |
| p.Spadj = int32(stacksize) |
| |
| case AADDI: |
| // Refine Spadjs account for adjustment via ADDI instruction. |
| if p.To.Type == obj.TYPE_REG && p.To.Reg == REG_SP && p.From.Type == obj.TYPE_CONST { |
| p.Spadj = int32(-p.From.Offset) |
| } |
| } |
| } |
| |
| // Rewrite MOV pseudo-instructions. This cannot be done in |
| // progedit, as SP offsets need to be applied before we split |
| // up some of the Addrs. |
| for p := cursym.Func().Text; p != nil; p = p.Link { |
| switch p.As { |
| case AMOV, AMOVB, AMOVH, AMOVW, AMOVBU, AMOVHU, AMOVWU, AMOVF, AMOVD: |
| rewriteMOV(ctxt, newprog, p) |
| } |
| } |
| |
| // Split immediates larger than 12-bits. |
| for p := cursym.Func().Text; p != nil; p = p.Link { |
| switch p.As { |
| // <opi> $imm, REG, TO |
| case AADDI, AANDI, AORI, AXORI: |
| // LUI $high, TMP |
| // ADDI $low, TMP, TMP |
| // <op> TMP, REG, TO |
| q := *p |
| low, high, err := Split32BitImmediate(p.From.Offset) |
| if err != nil { |
| ctxt.Diag("%v: constant %d too large", p, p.From.Offset, err) |
| } |
| if high == 0 { |
| break // no need to split |
| } |
| |
| p.As = ALUI |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: high} |
| p.Reg = 0 |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p.Spadj = 0 // needed if TO is SP |
| p = obj.Appendp(p, newprog) |
| |
| p.As = AADDIW |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: low} |
| p.Reg = REG_TMP |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p = obj.Appendp(p, newprog) |
| |
| switch q.As { |
| case AADDI: |
| p.As = AADD |
| case AANDI: |
| p.As = AAND |
| case AORI: |
| p.As = AOR |
| case AXORI: |
| p.As = AXOR |
| default: |
| ctxt.Diag("unsupported instruction %v for splitting", q) |
| } |
| p.Spadj = q.Spadj |
| p.To = q.To |
| p.Reg = q.Reg |
| p.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| |
| // <load> $imm, REG, TO (load $imm+(REG), TO) |
| case ALD, ALB, ALH, ALW, ALBU, ALHU, ALWU, AFLW, AFLD: |
| low, high, err := Split32BitImmediate(p.From.Offset) |
| if err != nil { |
| ctxt.Diag("%v: constant %d too large", p, p.From.Offset) |
| } |
| if high == 0 { |
| break // no need to split |
| } |
| q := *p |
| |
| // LUI $high, TMP |
| // ADD TMP, REG, TMP |
| // <load> $low, TMP, TO |
| p.As = ALUI |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: high} |
| p.Reg = 0 |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p.Spadj = 0 // needed if TO is SP |
| p = obj.Appendp(p, newprog) |
| |
| p.As = AADD |
| p.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p.Reg = q.From.Reg |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p = obj.Appendp(p, newprog) |
| |
| p.As = q.As |
| p.To = q.To |
| p.From = obj.Addr{Type: obj.TYPE_MEM, Reg: REG_TMP, Offset: low} |
| p.Reg = obj.REG_NONE |
| |
| // <store> $imm, REG, TO (store $imm+(TO), REG) |
| case ASD, ASB, ASH, ASW, AFSW, AFSD: |
| low, high, err := Split32BitImmediate(p.To.Offset) |
| if err != nil { |
| ctxt.Diag("%v: constant %d too large", p, p.To.Offset) |
| } |
| if high == 0 { |
| break // no need to split |
| } |
| q := *p |
| |
| // LUI $high, TMP |
| // ADD TMP, TO, TMP |
| // <store> $low, REG, TMP |
| p.As = ALUI |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: high} |
| p.Reg = 0 |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p.Spadj = 0 // needed if TO is SP |
| p = obj.Appendp(p, newprog) |
| |
| p.As = AADD |
| p.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p.Reg = q.To.Reg |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| p = obj.Appendp(p, newprog) |
| |
| p.As = q.As |
| p.From = obj.Addr{Type: obj.TYPE_REG, Reg: q.From.Reg, Offset: 0} |
| p.To = obj.Addr{Type: obj.TYPE_MEM, Reg: REG_TMP, Offset: low} |
| } |
| } |
| |
| // Compute instruction addresses. Once we do that, we need to check for |
| // overextended jumps and branches. Within each iteration, Pc differences |
| // are always lower bounds (since the program gets monotonically longer, |
| // a fixed point will be reached). No attempt to handle functions > 2GiB. |
| for { |
| rescan := false |
| setPCs(cursym.Func().Text, 0) |
| |
| for p := cursym.Func().Text; p != nil; p = p.Link { |
| switch p.As { |
| case ABEQ, ABEQZ, ABGE, ABGEU, ABGEZ, ABGT, ABGTU, ABGTZ, ABLE, ABLEU, ABLEZ, ABLT, ABLTU, ABLTZ, ABNE, ABNEZ: |
| if p.To.Type != obj.TYPE_BRANCH { |
| panic("assemble: instruction with branch-like opcode lacks destination") |
| } |
| offset := p.To.Target().Pc - p.Pc |
| if offset < -4096 || 4096 <= offset { |
| // Branch is long. Replace it with a jump. |
| jmp := obj.Appendp(p, newprog) |
| jmp.As = AJAL |
| jmp.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_ZERO} |
| jmp.To = obj.Addr{Type: obj.TYPE_BRANCH} |
| jmp.To.SetTarget(p.To.Target()) |
| |
| p.As = InvertBranch(p.As) |
| p.To.SetTarget(jmp.Link) |
| |
| // We may have made previous branches too long, |
| // so recheck them. |
| rescan = true |
| } |
| case AJAL: |
| if p.To.Target() == nil { |
| panic("intersymbol jumps should be expressed as AUIPC+JALR") |
| } |
| offset := p.To.Target().Pc - p.Pc |
| if offset < -(1<<20) || (1<<20) <= offset { |
| // Replace with 2-instruction sequence. This assumes |
| // that TMP is not live across J instructions, since |
| // it is reserved by SSA. |
| jmp := obj.Appendp(p, newprog) |
| jmp.As = AJALR |
| jmp.From = p.From |
| jmp.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| |
| // p.From is not generally valid, however will be |
| // fixed up in the next loop. |
| p.As = AAUIPC |
| p.From = obj.Addr{Type: obj.TYPE_BRANCH, Sym: p.From.Sym} |
| p.From.SetTarget(p.To.Target()) |
| p.Reg = 0 |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: REG_TMP} |
| |
| rescan = true |
| } |
| } |
| } |
| |
| if !rescan { |
| break |
| } |
| } |
| |
| // Now that there are no long branches, resolve branch and jump targets. |
| // At this point, instruction rewriting which changes the number of |
| // instructions will break everything--don't do it! |
| for p := cursym.Func().Text; p != nil; p = p.Link { |
| switch p.As { |
| case ABEQ, ABEQZ, ABGE, ABGEU, ABGEZ, ABGT, ABGTU, ABGTZ, ABLE, ABLEU, ABLEZ, ABLT, ABLTU, ABLTZ, ABNE, ABNEZ, AJAL: |
| switch p.To.Type { |
| case obj.TYPE_BRANCH: |
| p.To.Type, p.To.Offset = obj.TYPE_CONST, p.To.Target().Pc-p.Pc |
| case obj.TYPE_MEM: |
| panic("unhandled type") |
| } |
| |
| case AAUIPC: |
| if p.From.Type == obj.TYPE_BRANCH { |
| low, high, err := Split32BitImmediate(p.From.Target().Pc - p.Pc) |
| if err != nil { |
| ctxt.Diag("%v: jump displacement %d too large", p, p.To.Target().Pc-p.Pc) |
| } |
| p.From = obj.Addr{Type: obj.TYPE_CONST, Offset: high, Sym: cursym} |
| p.Link.From.Offset = low |
| } |
| } |
| } |
| |
| // Validate all instructions - this provides nice error messages. |
| for p := cursym.Func().Text; p != nil; p = p.Link { |
| for _, ins := range instructionsForProg(p) { |
| ins.validate(ctxt) |
| } |
| } |
| } |
| |
| func stacksplit(ctxt *obj.Link, p *obj.Prog, cursym *obj.LSym, newprog obj.ProgAlloc, framesize int64) *obj.Prog { |
| // Leaf function with no frame is effectively NOSPLIT. |
| if framesize == 0 { |
| return p |
| } |
| |
| // MOV g_stackguard(g), X10 |
| p = obj.Appendp(p, newprog) |
| p.As = AMOV |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = REGG |
| p.From.Offset = 2 * int64(ctxt.Arch.PtrSize) // G.stackguard0 |
| if cursym.CFunc() { |
| p.From.Offset = 3 * int64(ctxt.Arch.PtrSize) // G.stackguard1 |
| } |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = REG_X10 |
| |
| var to_done, to_more *obj.Prog |
| |
| if framesize <= objabi.StackSmall { |
| // small stack: SP < stackguard |
| // BLTU SP, stackguard, done |
| p = obj.Appendp(p, newprog) |
| p.As = ABLTU |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = REG_X10 |
| p.Reg = REG_SP |
| p.To.Type = obj.TYPE_BRANCH |
| to_done = p |
| } else if framesize <= objabi.StackBig { |
| // large stack: SP-framesize < stackguard-StackSmall |
| // ADD $-(framesize-StackSmall), SP, X11 |
| // BLTU X11, stackguard, done |
| p = obj.Appendp(p, newprog) |
| // TODO(sorear): logic inconsistent with comment, but both match all non-x86 arches |
| p.As = AADDI |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = -(int64(framesize) - objabi.StackSmall) |
| p.Reg = REG_SP |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = REG_X11 |
| |
| p = obj.Appendp(p, newprog) |
| p.As = ABLTU |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = REG_X10 |
| p.Reg = REG_X11 |
| p.To.Type = obj.TYPE_BRANCH |
| to_done = p |
| } else { |
| // Such a large stack we need to protect against wraparound. |
| // If SP is close to zero: |
| // SP-stackguard+StackGuard <= framesize + (StackGuard-StackSmall) |
| // The +StackGuard on both sides is required to keep the left side positive: |
| // SP is allowed to be slightly below stackguard. See stack.h. |
| // |
| // Preemption sets stackguard to StackPreempt, a very large value. |
| // That breaks the math above, so we have to check for that explicitly. |
| // // stackguard is X10 |
| // MOV $StackPreempt, X11 |
| // BEQ X10, X11, more |
| // ADD $StackGuard, SP, X11 |
| // SUB X10, X11 |
| // MOV $(framesize+(StackGuard-StackSmall)), X10 |
| // BGTU X11, X10, done |
| p = obj.Appendp(p, newprog) |
| p.As = AMOV |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = objabi.StackPreempt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = REG_X11 |
| |
| p = obj.Appendp(p, newprog) |
| to_more = p |
| p.As = ABEQ |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = REG_X10 |
| p.Reg = REG_X11 |
| p.To.Type = obj.TYPE_BRANCH |
| |
| p = obj.Appendp(p, newprog) |
| p.As = AADDI |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = int64(objabi.StackGuard) |
| p.Reg = REG_SP |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = REG_X11 |
| |
| p = obj.Appendp(p, newprog) |
| p.As = ASUB |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = REG_X10 |
| p.Reg = REG_X11 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = REG_X11 |
| |
| p = obj.Appendp(p, newprog) |
| p.As = AMOV |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = int64(framesize) + int64(objabi.StackGuard) - objabi.StackSmall |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = REG_X10 |
| |
| p = obj.Appendp(p, newprog) |
| p.As = ABLTU |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = REG_X10 |
| p.Reg = REG_X11 |
| p.To.Type = obj.TYPE_BRANCH |
| to_done = p |
| } |
| |
| p = ctxt.EmitEntryLiveness(cursym, p, newprog) |
| |
| // CALL runtime.morestack(SB) |
| p = obj.Appendp(p, newprog) |
| p.As = obj.ACALL |
| p.To.Type = obj.TYPE_BRANCH |
| if cursym.CFunc() { |
| p.To.Sym = ctxt.Lookup("runtime.morestackc") |
| } else if !cursym.Func().Text.From.Sym.NeedCtxt() { |
| p.To.Sym = ctxt.Lookup("runtime.morestack_noctxt") |
| } else { |
| p.To.Sym = ctxt.Lookup("runtime.morestack") |
| } |
| if to_more != nil { |
| to_more.To.SetTarget(p) |
| } |
| p = jalrToSym(ctxt, p, newprog, REG_X5) |
| |
| // JMP start |
| p = obj.Appendp(p, newprog) |
| p.As = AJAL |
| p.To = obj.Addr{Type: obj.TYPE_BRANCH} |
| p.From = obj.Addr{Type: obj.TYPE_REG, Reg: REG_ZERO} |
| p.To.SetTarget(cursym.Func().Text.Link) |
| |
| // placeholder for to_done's jump target |
| p = obj.Appendp(p, newprog) |
| p.As = obj.ANOP // zero-width place holder |
| to_done.To.SetTarget(p) |
| |
| return p |
| } |
| |
| // signExtend sign extends val starting at bit bit. |
| func signExtend(val int64, bit uint) int64 { |
| return val << (64 - bit) >> (64 - bit) |
| } |
| |
| // Split32BitImmediate splits a signed 32-bit immediate into a signed 20-bit |
| // upper immediate and a signed 12-bit lower immediate to be added to the upper |
| // result. For example, high may be used in LUI and low in a following ADDI to |
| // generate a full 32-bit constant. |
| func Split32BitImmediate(imm int64) (low, high int64, err error) { |
| if !immIFits(imm, 32) { |
| return 0, 0, fmt.Errorf("immediate does not fit in 32-bits: %d", imm) |
| } |
| |
| // Nothing special needs to be done if the immediate fits in 12-bits. |
| if immIFits(imm, 12) { |
| return imm, 0, nil |
| } |
| |
| high = imm >> 12 |
| |
| // The bottom 12 bits will be treated as signed. |
| // |
| // If that will result in a negative 12 bit number, add 1 to |
| // our upper bits to adjust for the borrow. |
| // |
| // It is not possible for this increment to overflow. To |
| // overflow, the 20 top bits would be 1, and the sign bit for |
| // the low 12 bits would be set, in which case the entire 32 |
| // bit pattern fits in a 12 bit signed value. |
| if imm&(1<<11) != 0 { |
| high++ |
| } |
| |
| low = signExtend(imm, 12) |
| high = signExtend(high, 20) |
| |
| return low, high, nil |
| } |
| |
| func regVal(r, min, max uint32) uint32 { |
| if r < min || r > max { |
| panic(fmt.Sprintf("register out of range, want %d < %d < %d", min, r, max)) |
| } |
| return r - min |
| } |
| |
| // regI returns an integer register. |
| func regI(r uint32) uint32 { |
| return regVal(r, REG_X0, REG_X31) |
| } |
| |
| // regF returns a float register. |
| func regF(r uint32) uint32 { |
| return regVal(r, REG_F0, REG_F31) |
| } |
| |
| // regAddr extracts a register from an Addr. |
| func regAddr(a obj.Addr, min, max uint32) uint32 { |
| if a.Type != obj.TYPE_REG { |
| panic(fmt.Sprintf("ill typed: %+v", a)) |
| } |
| return regVal(uint32(a.Reg), min, max) |
| } |
| |
| // regIAddr extracts the integer register from an Addr. |
| func regIAddr(a obj.Addr) uint32 { |
| return regAddr(a, REG_X0, REG_X31) |
| } |
| |
| // regFAddr extracts the float register from an Addr. |
| func regFAddr(a obj.Addr) uint32 { |
| return regAddr(a, REG_F0, REG_F31) |
| } |
| |
| // immIFits reports whether immediate value x fits in nbits bits |
| // as a signed integer. |
| func immIFits(x int64, nbits uint) bool { |
| nbits-- |
| var min int64 = -1 << nbits |
| var max int64 = 1<<nbits - 1 |
| return min <= x && x <= max |
| } |
| |
| // immI extracts the signed integer of the specified size from an immediate. |
| func immI(as obj.As, imm int64, nbits uint) uint32 { |
| if !immIFits(imm, nbits) { |
| panic(fmt.Sprintf("%v\tsigned immediate %d cannot fit in %d bits", as, imm, nbits)) |
| } |
| return uint32(imm) |
| } |
| |
| func wantImmI(ctxt *obj.Link, as obj.As, imm int64, nbits uint) { |
| if !immIFits(imm, nbits) { |
| ctxt.Diag("%v\tsigned immediate cannot be larger than %d bits but got %d", as, nbits, imm) |
| } |
| } |
| |
| func wantReg(ctxt *obj.Link, as obj.As, pos string, descr string, r, min, max uint32) { |
| if r < min || r > max { |
| var suffix string |
| if r != obj.REG_NONE { |
| suffix = fmt.Sprintf(" but got non-%s register %s", descr, RegName(int(r))) |
| } |
| ctxt.Diag("%v\texpected %s register in %s position%s", as, descr, pos, suffix) |
| } |
| } |
| |
| func wantNoneReg(ctxt *obj.Link, as obj.As, pos string, r uint32) { |
| if r != obj.REG_NONE { |
| ctxt.Diag("%v\texpected no register in %s but got register %s", as, pos, RegName(int(r))) |
| } |
| } |
| |
| // wantIntReg checks that r is an integer register. |
| func wantIntReg(ctxt *obj.Link, as obj.As, pos string, r uint32) { |
| wantReg(ctxt, as, pos, "integer", r, REG_X0, REG_X31) |
| } |
| |
| // wantFloatReg checks that r is a floating-point register. |
| func wantFloatReg(ctxt *obj.Link, as obj.As, pos string, r uint32) { |
| wantReg(ctxt, as, pos, "float", r, REG_F0, REG_F31) |
| } |
| |
| // wantEvenOffset checks that the offset is a multiple of two. |
| func wantEvenOffset(ctxt *obj.Link, as obj.As, offset int64) { |
| if offset%1 != 0 { |
| ctxt.Diag("%v\tjump offset %v must be even", as, offset) |
| } |
| } |
| |
| func validateRIII(ctxt *obj.Link, ins *instruction) { |
| wantIntReg(ctxt, ins.as, "rd", ins.rd) |
| wantIntReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantIntReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateRFFF(ctxt *obj.Link, ins *instruction) { |
| wantFloatReg(ctxt, ins.as, "rd", ins.rd) |
| wantFloatReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantFloatReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateRFFI(ctxt *obj.Link, ins *instruction) { |
| wantIntReg(ctxt, ins.as, "rd", ins.rd) |
| wantFloatReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantFloatReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateRFI(ctxt *obj.Link, ins *instruction) { |
| wantIntReg(ctxt, ins.as, "rd", ins.rd) |
| wantNoneReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantFloatReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateRIF(ctxt *obj.Link, ins *instruction) { |
| wantFloatReg(ctxt, ins.as, "rd", ins.rd) |
| wantNoneReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantIntReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateRFF(ctxt *obj.Link, ins *instruction) { |
| wantFloatReg(ctxt, ins.as, "rd", ins.rd) |
| wantNoneReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantFloatReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateII(ctxt *obj.Link, ins *instruction) { |
| wantImmI(ctxt, ins.as, ins.imm, 12) |
| wantIntReg(ctxt, ins.as, "rd", ins.rd) |
| wantIntReg(ctxt, ins.as, "rs1", ins.rs1) |
| } |
| |
| func validateIF(ctxt *obj.Link, ins *instruction) { |
| wantImmI(ctxt, ins.as, ins.imm, 12) |
| wantFloatReg(ctxt, ins.as, "rd", ins.rd) |
| wantIntReg(ctxt, ins.as, "rs1", ins.rs1) |
| } |
| |
| func validateSI(ctxt *obj.Link, ins *instruction) { |
| wantImmI(ctxt, ins.as, ins.imm, 12) |
| wantIntReg(ctxt, ins.as, "rd", ins.rd) |
| wantIntReg(ctxt, ins.as, "rs1", ins.rs1) |
| } |
| |
| func validateSF(ctxt *obj.Link, ins *instruction) { |
| wantImmI(ctxt, ins.as, ins.imm, 12) |
| wantIntReg(ctxt, ins.as, "rd", ins.rd) |
| wantFloatReg(ctxt, ins.as, "rs1", ins.rs1) |
| } |
| |
| func validateB(ctxt *obj.Link, ins *instruction) { |
| // Offsets are multiples of two, so accept 13 bit immediates for the |
| // 12 bit slot. We implicitly drop the least significant bit in encodeB. |
| wantEvenOffset(ctxt, ins.as, ins.imm) |
| wantImmI(ctxt, ins.as, ins.imm, 13) |
| wantNoneReg(ctxt, ins.as, "rd", ins.rd) |
| wantIntReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantIntReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateU(ctxt *obj.Link, ins *instruction) { |
| wantImmI(ctxt, ins.as, ins.imm, 20) |
| wantIntReg(ctxt, ins.as, "rd", ins.rd) |
| wantNoneReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantNoneReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateJ(ctxt *obj.Link, ins *instruction) { |
| // Offsets are multiples of two, so accept 21 bit immediates for the |
| // 20 bit slot. We implicitly drop the least significant bit in encodeJ. |
| wantEvenOffset(ctxt, ins.as, ins.imm) |
| wantImmI(ctxt, ins.as, ins.imm, 21) |
| wantIntReg(ctxt, ins.as, "rd", ins.rd) |
| wantNoneReg(ctxt, ins.as, "rs1", ins.rs1) |
| wantNoneReg(ctxt, ins.as, "rs2", ins.rs2) |
| } |
| |
| func validateRaw(ctxt *obj.Link, ins *instruction) { |
| // Treat the raw value specially as a 32-bit unsigned integer. |
| // Nobody wants to enter negative machine code. |
| if ins.imm < 0 || 1<<32 <= ins.imm { |
| ctxt.Diag("%v\timmediate in raw position cannot be larger than 32 bits but got %d", ins.as, ins.imm) |
| } |
| } |
| |
| // encodeR encodes an R-type RISC-V instruction. |
| func encodeR(as obj.As, rs1, rs2, rd, funct3, funct7 uint32) uint32 { |
| enc := encode(as) |
| if enc == nil { |
| panic("encodeR: could not encode instruction") |
| } |
| if enc.rs2 != 0 && rs2 != 0 { |
| panic("encodeR: instruction uses rs2, but rs2 was nonzero") |
| } |
| return funct7<<25 | enc.funct7<<25 | enc.rs2<<20 | rs2<<20 | rs1<<15 | enc.funct3<<12 | funct3<<12 | rd<<7 | enc.opcode |
| } |
| |
| func encodeRIII(ins *instruction) uint32 { |
| return encodeR(ins.as, regI(ins.rs1), regI(ins.rs2), regI(ins.rd), ins.funct3, ins.funct7) |
| } |
| |
| func encodeRFFF(ins *instruction) uint32 { |
| return encodeR(ins.as, regF(ins.rs1), regF(ins.rs2), regF(ins.rd), ins.funct3, ins.funct7) |
| } |
| |
| func encodeRFFI(ins *instruction) uint32 { |
| return encodeR(ins.as, regF(ins.rs1), regF(ins.rs2), regI(ins.rd), ins.funct3, ins.funct7) |
| } |
| |
| func encodeRFI(ins *instruction) uint32 { |
| return encodeR(ins.as, regF(ins.rs2), 0, regI(ins.rd), ins.funct3, ins.funct7) |
| } |
| |
| func encodeRIF(ins *instruction) uint32 { |
| return encodeR(ins.as, regI(ins.rs2), 0, regF(ins.rd), ins.funct3, ins.funct7) |
| } |
| |
| func encodeRFF(ins *instruction) uint32 { |
| return encodeR(ins.as, regF(ins.rs2), 0, regF(ins.rd), ins.funct3, ins.funct7) |
| } |
| |
| // encodeI encodes an I-type RISC-V instruction. |
| func encodeI(as obj.As, rs1, rd, imm uint32) uint32 { |
| enc := encode(as) |
| if enc == nil { |
| panic("encodeI: could not encode instruction") |
| } |
| imm |= uint32(enc.csr) |
| return imm<<20 | rs1<<15 | enc.funct3<<12 | rd<<7 | enc.opcode |
| } |
| |
| func encodeII(ins *instruction) uint32 { |
| return encodeI(ins.as, regI(ins.rs1), regI(ins.rd), uint32(ins.imm)) |
| } |
| |
| func encodeIF(ins *instruction) uint32 { |
| return encodeI(ins.as, regI(ins.rs1), regF(ins.rd), uint32(ins.imm)) |
| } |
| |
| // encodeS encodes an S-type RISC-V instruction. |
| func encodeS(as obj.As, rs1, rs2, imm uint32) uint32 { |
| enc := encode(as) |
| if enc == nil { |
| panic("encodeS: could not encode instruction") |
| } |
| return (imm>>5)<<25 | rs2<<20 | rs1<<15 | enc.funct3<<12 | (imm&0x1f)<<7 | enc.opcode |
| } |
| |
| func encodeSI(ins *instruction) uint32 { |
| return encodeS(ins.as, regI(ins.rd), regI(ins.rs1), uint32(ins.imm)) |
| } |
| |
| func encodeSF(ins *instruction) uint32 { |
| return encodeS(ins.as, regI(ins.rd), regF(ins.rs1), uint32(ins.imm)) |
| } |
| |
| // encodeB encodes a B-type RISC-V instruction. |
| func encodeB(ins *instruction) uint32 { |
| imm := immI(ins.as, ins.imm, 13) |
| rs2 := regI(ins.rs1) |
| rs1 := regI(ins.rs2) |
| enc := encode(ins.as) |
| if enc == nil { |
| panic("encodeB: could not encode instruction") |
| } |
| return (imm>>12)<<31 | ((imm>>5)&0x3f)<<25 | rs2<<20 | rs1<<15 | enc.funct3<<12 | ((imm>>1)&0xf)<<8 | ((imm>>11)&0x1)<<7 | enc.opcode |
| } |
| |
| // encodeU encodes a U-type RISC-V instruction. |
| func encodeU(ins *instruction) uint32 { |
| // The immediates for encodeU are the upper 20 bits of a 32 bit value. |
| // Rather than have the user/compiler generate a 32 bit constant, the |
| // bottommost bits of which must all be zero, instead accept just the |
| // top bits. |
| imm := immI(ins.as, ins.imm, 20) |
| rd := regI(ins.rd) |
| enc := encode(ins.as) |
| if enc == nil { |
| panic("encodeU: could not encode instruction") |
| } |
| return imm<<12 | rd<<7 | enc.opcode |
| } |
| |
| // encodeJ encodes a J-type RISC-V instruction. |
| func encodeJ(ins *instruction) uint32 { |
| imm := immI(ins.as, ins.imm, 21) |
| rd := regI(ins.rd) |
| enc := encode(ins.as) |
| if enc == nil { |
| panic("encodeJ: could not encode instruction") |
| } |
| return (imm>>20)<<31 | ((imm>>1)&0x3ff)<<21 | ((imm>>11)&0x1)<<20 | ((imm>>12)&0xff)<<12 | rd<<7 | enc.opcode |
| } |
| |
| func encodeRawIns(ins *instruction) uint32 { |
| // Treat the raw value specially as a 32-bit unsigned integer. |
| // Nobody wants to enter negative machine code. |
| if ins.imm < 0 || 1<<32 <= ins.imm { |
| panic(fmt.Sprintf("immediate %d cannot fit in 32 bits", ins.imm)) |
| } |
| return uint32(ins.imm) |
| } |
| |
| func EncodeIImmediate(imm int64) (int64, error) { |
| if !immIFits(imm, 12) { |
| return 0, fmt.Errorf("immediate %#x does not fit in 12 bits", imm) |
| } |
| return imm << 20, nil |
| } |
| |
| func EncodeSImmediate(imm int64) (int64, error) { |
| if !immIFits(imm, 12) { |
| return 0, fmt.Errorf("immediate %#x does not fit in 12 bits", imm) |
| } |
| return ((imm >> 5) << 25) | ((imm & 0x1f) << 7), nil |
| } |
| |
| func EncodeUImmediate(imm int64) (int64, error) { |
| if !immIFits(imm, 20) { |
| return 0, fmt.Errorf("immediate %#x does not fit in 20 bits", imm) |
| } |
| return imm << 12, nil |
| } |
| |
| type encoding struct { |
| encode func(*instruction) uint32 // encode returns the machine code for an instruction |
| validate func(*obj.Link, *instruction) // validate validates an instruction |
| length int // length of encoded instruction; 0 for pseudo-ops, 4 otherwise |
| } |
| |
| var ( |
| // Encodings have the following naming convention: |
| // |
| // 1. the instruction encoding (R/I/S/B/U/J), in lowercase |
| // 2. zero or more register operand identifiers (I = integer |
| // register, F = float register), in uppercase |
| // 3. the word "Encoding" |
| // |
| // For example, rIIIEncoding indicates an R-type instruction with two |
| // integer register inputs and an integer register output; sFEncoding |
| // indicates an S-type instruction with rs2 being a float register. |
| |
| rIIIEncoding = encoding{encode: encodeRIII, validate: validateRIII, length: 4} |
| rFFFEncoding = encoding{encode: encodeRFFF, validate: validateRFFF, length: 4} |
| rFFIEncoding = encoding{encode: encodeRFFI, validate: validateRFFI, length: 4} |
| rFIEncoding = encoding{encode: encodeRFI, validate: validateRFI, length: 4} |
| rIFEncoding = encoding{encode: encodeRIF, validate: validateRIF, length: 4} |
| rFFEncoding = encoding{encode: encodeRFF, validate: validateRFF, length: 4} |
| |
| iIEncoding = encoding{encode: encodeII, validate: validateII, length: 4} |
| iFEncoding = encoding{encode: encodeIF, validate: validateIF, length: 4} |
| |
| sIEncoding = encoding{encode: encodeSI, validate: validateSI, length: 4} |
| sFEncoding = encoding{encode: encodeSF, validate: validateSF, length: 4} |
| |
| bEncoding = encoding{encode: encodeB, validate: validateB, length: 4} |
| uEncoding = encoding{encode: encodeU, validate: validateU, length: 4} |
| jEncoding = encoding{encode: encodeJ, validate: validateJ, length: 4} |
| |
| // rawEncoding encodes a raw instruction byte sequence. |
| rawEncoding = encoding{encode: encodeRawIns, validate: validateRaw, length: 4} |
| |
| // pseudoOpEncoding panics if encoding is attempted, but does no validation. |
| pseudoOpEncoding = encoding{encode: nil, validate: func(*obj.Link, *instruction) {}, length: 0} |
| |
| // badEncoding is used when an invalid op is encountered. |
| // An error has already been generated, so let anything else through. |
| badEncoding = encoding{encode: func(*instruction) uint32 { return 0 }, validate: func(*obj.Link, *instruction) {}, length: 0} |
| ) |
| |
| // encodings contains the encodings for RISC-V instructions. |
| // Instructions are masked with obj.AMask to keep indices small. |
| var encodings = [ALAST & obj.AMask]encoding{ |
| |
| // Unprivileged ISA |
| |
| // 2.4: Integer Computational Instructions |
| AADDI & obj.AMask: iIEncoding, |
| ASLTI & obj.AMask: iIEncoding, |
| ASLTIU & obj.AMask: iIEncoding, |
| AANDI & obj.AMask: iIEncoding, |
| AORI & obj.AMask: iIEncoding, |
| AXORI & obj.AMask: iIEncoding, |
| ASLLI & obj.AMask: iIEncoding, |
| ASRLI & obj.AMask: iIEncoding, |
| ASRAI & obj.AMask: iIEncoding, |
| ALUI & obj.AMask: uEncoding, |
| AAUIPC & obj.AMask: uEncoding, |
| AADD & obj.AMask: rIIIEncoding, |
| ASLT & obj.AMask: rIIIEncoding, |
| ASLTU & obj.AMask: rIIIEncoding, |
| AAND & obj.AMask: rIIIEncoding, |
| AOR & obj.AMask: rIIIEncoding, |
| AXOR & obj.AMask: rIIIEncoding, |
| ASLL & obj.AMask: rIIIEncoding, |
| ASRL & obj.AMask: rIIIEncoding, |
| ASUB & obj.AMask: rIIIEncoding, |
| ASRA & obj.AMask: rIIIEncoding, |
| |
| // 2.5: Control Transfer Instructions |
| AJAL & obj.AMask: jEncoding, |
| AJALR & obj.AMask: iIEncoding, |
| ABEQ & obj.AMask: bEncoding, |
| ABNE & obj.AMask: bEncoding, |
| ABLT & obj.AMask: bEncoding, |
| ABLTU & obj.AMask: bEncoding, |
| ABGE & obj.AMask: bEncoding, |
| ABGEU & obj.AMask: bEncoding, |
| |
| // 2.6: Load and Store Instructions |
| ALW & obj.AMask: iIEncoding, |
| ALWU & obj.AMask: iIEncoding, |
| ALH & obj.AMask: iIEncoding, |
| ALHU & obj.AMask: iIEncoding, |
| ALB & obj.AMask: iIEncoding, |
| ALBU & obj.AMask: iIEncoding, |
| ASW & obj.AMask: sIEncoding, |
| ASH & obj.AMask: sIEncoding, |
| ASB & obj.AMask: sIEncoding, |
| |
| // 2.7: Memory Ordering |
| AFENCE & obj.AMask: iIEncoding, |
| |
| // 5.2: Integer Computational Instructions (RV64I) |
| AADDIW & obj.AMask: iIEncoding, |
| ASLLIW & obj.AMask: iIEncoding, |
| ASRLIW & obj.AMask: iIEncoding, |
| ASRAIW & obj.AMask: iIEncoding, |
| AADDW & obj.AMask: rIIIEncoding, |
| ASLLW & obj.AMask: rIIIEncoding, |
| ASRLW & obj.AMask: rIIIEncoding, |
| ASUBW & obj.AMask: rIIIEncoding, |
| ASRAW & obj.AMask: rIIIEncoding, |
| |
| // 5.3: Load and Store Instructions (RV64I) |
| ALD & obj.AMask: iIEncoding, |
| ASD & obj.AMask: sIEncoding, |
| |
| // 7.1: Multiplication Operations |
| AMUL & obj.AMask: rIIIEncoding, |
| AMULH & obj.AMask: rIIIEncoding, |
| AMULHU & obj.AMask: rIIIEncoding, |
| AMULHSU & obj.AMask: rIIIEncoding, |
| AMULW & obj.AMask: rIIIEncoding, |
| ADIV & obj.AMask: rIIIEncoding, |
| ADIVU & obj.AMask: rIIIEncoding, |
| AREM & obj.AMask: rIIIEncoding, |
| AREMU & obj.AMask: rIIIEncoding, |
| ADIVW & obj.AMask: rIIIEncoding, |
| ADIVUW & obj.AMask: rIIIEncoding, |
| AREMW & obj.AMask: rIIIEncoding, |
| AREMUW & obj.AMask: rIIIEncoding, |
| |
| // 8.2: Load-Reserved/Store-Conditional |
| ALRW & obj.AMask: rIIIEncoding, |
| ALRD & obj.AMask: rIIIEncoding, |
| ASCW & obj.AMask: rIIIEncoding, |
| ASCD & obj.AMask: rIIIEncoding, |
| |
| // 8.3: Atomic Memory Operations |
| AAMOSWAPW & obj.AMask: rIIIEncoding, |
| AAMOSWAPD & obj.AMask: rIIIEncoding, |
| AAMOADDW & obj.AMask: rIIIEncoding, |
| AAMOADDD & obj.AMask: rIIIEncoding, |
| AAMOANDW & obj.AMask: rIIIEncoding, |
| AAMOANDD & obj.AMask: rIIIEncoding, |
| AAMOORW & obj.AMask: rIIIEncoding, |
| AAMOORD & obj.AMask: rIIIEncoding, |
| AAMOXORW & obj.AMask: rIIIEncoding, |
| AAMOXORD & obj.AMask: rIIIEncoding, |
| AAMOMAXW & obj.AMask: rIIIEncoding, |
| AAMOMAXD & obj.AMask: rIIIEncoding, |
| AAMOMAXUW & obj.AMask: rIIIEncoding, |
| AAMOMAXUD & obj.AMask: rIIIEncoding, |
| AAMOMINW & obj.AMask: rIIIEncoding, |
| AAMOMIND & obj.AMask: rIIIEncoding, |
| AAMOMINUW & obj.AMask: rIIIEncoding, |
| AAMOMINUD & obj.AMask: rIIIEncoding, |
| |
| // 10.1: Base Counters and Timers |
| ARDCYCLE & obj.AMask: iIEncoding, |
| ARDTIME & obj.AMask: iIEncoding, |
| ARDINSTRET & obj.AMask: iIEncoding, |
| |
| // 11.5: Single-Precision Load and Store Instructions |
| AFLW & obj.AMask: iFEncoding, |
| AFSW & obj.AMask: sFEncoding, |
| |
| // 11.6: Single-Precision Floating-Point Computational Instructions |
| AFADDS & obj.AMask: rFFFEncoding, |
| AFSUBS & obj.AMask: rFFFEncoding, |
| AFMULS & obj.AMask: rFFFEncoding, |
| AFDIVS & obj.AMask: rFFFEncoding, |
| AFMINS & obj.AMask: rFFFEncoding, |
| AFMAXS & obj.AMask: rFFFEncoding, |
| AFSQRTS & obj.AMask: rFFFEncoding, |
| |
| // 11.7: Single-Precision Floating-Point Conversion and Move Instructions |
| AFCVTWS & obj.AMask: rFIEncoding, |
| AFCVTLS & obj.AMask: rFIEncoding, |
| AFCVTSW & obj.AMask: rIFEncoding, |
| AFCVTSL & obj.AMask: rIFEncoding, |
| AFCVTWUS & obj.AMask: rFIEncoding, |
| AFCVTLUS & obj.AMask: rFIEncoding, |
| AFCVTSWU & obj.AMask: rIFEncoding, |
| AFCVTSLU & obj.AMask: rIFEncoding, |
| AFSGNJS & obj.AMask: rFFFEncoding, |
| AFSGNJNS & obj.AMask: rFFFEncoding, |
| AFSGNJXS & obj.AMask: rFFFEncoding, |
| AFMVXS & obj.AMask: rFIEncoding, |
| AFMVSX & obj.AMask: rIFEncoding, |
| AFMVXW & obj.AMask: rFIEncoding, |
| AFMVWX & obj.AMask: rIFEncoding, |
| |
| // 11.8: Single-Precision Floating-Point Compare Instructions |
| AFEQS & obj.AMask: rFFIEncoding, |
| AFLTS & obj.AMask: rFFIEncoding, |
| AFLES & obj.AMask: rFFIEncoding, |
| |
| // 11.9: Single-Precision Floating-Point Classify Instruction |
| AFCLASSS & obj.AMask: rFIEncoding, |
| |
| // 12.3: Double-Precision Load and Store Instructions |
| AFLD & obj.AMask: iFEncoding, |
| AFSD & obj.AMask: sFEncoding, |
| |
| // 12.4: Double-Precision Floating-Point Computational Instructions |
| AFADDD & obj.AMask: rFFFEncoding, |
| AFSUBD & obj.AMask: rFFFEncoding, |
| AFMULD & obj.AMask: rFFFEncoding, |
| AFDIVD & obj.AMask: rFFFEncoding, |
| AFMIND & obj.AMask: rFFFEncoding, |
| AFMAXD & obj.AMask: rFFFEncoding, |
| AFSQRTD & obj.AMask: rFFFEncoding, |
| |
| // 12.5: Double-Precision Floating-Point Conversion and Move Instructions |
| AFCVTWD & obj.AMask: rFIEncoding, |
| AFCVTLD & obj.AMask: rFIEncoding, |
| AFCVTDW & obj.AMask: rIFEncoding, |
| AFCVTDL & obj.AMask: rIFEncoding, |
| AFCVTWUD & obj.AMask: rFIEncoding, |
| AFCVTLUD & obj.AMask: rFIEncoding, |
| AFCVTDWU & obj.AMask: rIFEncoding, |
| AFCVTDLU & obj.AMask: rIFEncoding, |
| AFCVTSD & obj.AMask: rFFEncoding, |
| AFCVTDS & obj.AMask: rFFEncoding, |
| AFSGNJD & obj.AMask: rFFFEncoding, |
| AFSGNJND & obj.AMask: rFFFEncoding, |
| AFSGNJXD & obj.AMask: rFFFEncoding, |
| AFMVXD & obj.AMask: rFIEncoding, |
| AFMVDX & obj.AMask: rIFEncoding, |
| |
| // 12.6: Double-Precision Floating-Point Compare Instructions |
| AFEQD & obj.AMask: rFFIEncoding, |
| AFLTD & obj.AMask: rFFIEncoding, |
| AFLED & obj.AMask: rFFIEncoding, |
| |
| // 12.7: Double-Precision Floating-Point Classify Instruction |
| AFCLASSD & obj.AMask: rFIEncoding, |
| |
| // Privileged ISA |
| |
| // 3.2.1: Environment Call and Breakpoint |
| AECALL & obj.AMask: iIEncoding, |
| AEBREAK & obj.AMask: iIEncoding, |
| |
| // Escape hatch |
| AWORD & obj.AMask: rawEncoding, |
| |
| // Pseudo-operations |
| obj.AFUNCDATA: pseudoOpEncoding, |
| obj.APCDATA: pseudoOpEncoding, |
| obj.ATEXT: pseudoOpEncoding, |
| obj.ANOP: pseudoOpEncoding, |
| obj.ADUFFZERO: pseudoOpEncoding, |
| obj.ADUFFCOPY: pseudoOpEncoding, |
| } |
| |
| // encodingForAs returns the encoding for an obj.As. |
| func encodingForAs(as obj.As) (encoding, error) { |
| if base := as &^ obj.AMask; base != obj.ABaseRISCV && base != 0 { |
| return badEncoding, fmt.Errorf("encodingForAs: not a RISC-V instruction %s", as) |
| } |
| asi := as & obj.AMask |
| if int(asi) >= len(encodings) { |
| return badEncoding, fmt.Errorf("encodingForAs: bad RISC-V instruction %s", as) |
| } |
| enc := encodings[asi] |
| if enc.validate == nil { |
| return badEncoding, fmt.Errorf("encodingForAs: no encoding for instruction %s", as) |
| } |
| return enc, nil |
| } |
| |
| type instruction struct { |
| as obj.As // Assembler opcode |
| rd uint32 // Destination register |
| rs1 uint32 // Source register 1 |
| rs2 uint32 // Source register 2 |
| imm int64 // Immediate |
| funct3 uint32 // Function 3 |
| funct7 uint32 // Function 7 |
| } |
| |
| func (ins *instruction) encode() (uint32, error) { |
| enc, err := encodingForAs(ins.as) |
| if err != nil { |
| return 0, err |
| } |
| if enc.length > 0 { |
| return enc.encode(ins), nil |
| } |
| return 0, fmt.Errorf("fixme") |
| } |
| |
| func (ins *instruction) length() int { |
| enc, err := encodingForAs(ins.as) |
| if err != nil { |
| return 0 |
| } |
| return enc.length |
| } |
| |
| func (ins *instruction) validate(ctxt *obj.Link) { |
| enc, err := encodingForAs(ins.as) |
| if err != nil { |
| ctxt.Diag(err.Error()) |
| return |
| } |
| enc.validate(ctxt, ins) |
| } |
| |
| // instructionsForProg returns the machine instructions for an *obj.Prog. |
| func instructionsForProg(p *obj.Prog) []*instruction { |
| ins := &instruction{ |
| as: p.As, |
| rd: uint32(p.To.Reg), |
| rs1: uint32(p.Reg), |
| rs2: uint32(p.From.Reg), |
| imm: p.From.Offset, |
| } |
| |
| inss := []*instruction{ins} |
| switch ins.as { |
| case AJAL, AJALR: |
| ins.rd, ins.rs1, ins.rs2 = uint32(p.From.Reg), uint32(p.To.Reg), obj.REG_NONE |
| ins.imm = p.To.Offset |
| |
| case ABEQ, ABEQZ, ABGE, ABGEU, ABGEZ, ABGT, ABGTU, ABGTZ, ABLE, ABLEU, ABLEZ, ABLT, ABLTU, ABLTZ, ABNE, ABNEZ: |
| switch ins.as { |
| case ABEQZ: |
| ins.as, ins.rs1, ins.rs2 = ABEQ, REG_ZERO, uint32(p.From.Reg) |
| case ABGEZ: |
| ins.as, ins.rs1, ins.rs2 = ABGE, REG_ZERO, uint32(p.From.Reg) |
| case ABGT: |
| ins.as, ins.rs1, ins.rs2 = ABLT, uint32(p.From.Reg), uint32(p.Reg) |
| case ABGTU: |
| ins.as, ins.rs1, ins.rs2 = ABLTU, uint32(p.From.Reg), uint32(p.Reg) |
| case ABGTZ: |
| ins.as, ins.rs1, ins.rs2 = ABLT, uint32(p.From.Reg), REG_ZERO |
| case ABLE: |
| ins.as, ins.rs1, ins.rs2 = ABGE, uint32(p.From.Reg), uint32(p.Reg) |
| case ABLEU: |
| ins.as, ins.rs1, ins.rs2 = ABGEU, uint32(p.From.Reg), uint32(p.Reg) |
| case ABLEZ: |
| ins.as, ins.rs1, ins.rs2 = ABGE, uint32(p.From.Reg), REG_ZERO |
| case ABLTZ: |
| ins.as, ins.rs1, ins.rs2 = ABLT, REG_ZERO, uint32(p.From.Reg) |
| case ABNEZ: |
| ins.as, ins.rs1, ins.rs2 = ABNE, REG_ZERO, uint32(p.From.Reg) |
| } |
| ins.imm = p.To.Offset |
| |
| case AMOV, AMOVB, AMOVH, AMOVW, AMOVBU, AMOVHU, AMOVWU, AMOVF, AMOVD: |
| // Handle register to register moves. |
| if p.From.Type != obj.TYPE_REG || p.To.Type != obj.TYPE_REG { |
| break |
| } |
| switch p.As { |
| case AMOV: // MOV Ra, Rb -> ADDI $0, Ra, Rb |
| ins.as, ins.rs1, ins.rs2, ins.imm = AADDI, uint32(p.From.Reg), obj.REG_NONE, 0 |
| case AMOVW: // MOVW Ra, Rb -> ADDIW $0, Ra, Rb |
| ins.as, ins.rs1, ins.rs2, ins.imm = AADDIW, uint32(p.From.Reg), obj.REG_NONE, 0 |
| case AMOVBU: // MOVBU Ra, Rb -> ANDI $255, Ra, Rb |
| ins.as, ins.rs1, ins.rs2, ins.imm = AANDI, uint32(p.From.Reg), obj.REG_NONE, 255 |
| case AMOVF: // MOVF Ra, Rb -> FSGNJS Ra, Ra, Rb |
| ins.as, ins.rs1 = AFSGNJS, uint32(p.From.Reg) |
| case AMOVD: // MOVD Ra, Rb -> FSGNJD Ra, Ra, Rb |
| ins.as, ins.rs1 = AFSGNJD, uint32(p.From.Reg) |
| case AMOVB, AMOVH: |
| // Use SLLI/SRAI to extend. |
| ins.as, ins.rs1, ins.rs2 = ASLLI, uint32(p.From.Reg), obj.REG_NONE |
| if p.As == AMOVB { |
| ins.imm = 56 |
| } else if p.As == AMOVH { |
| ins.imm = 48 |
| } |
| ins2 := &instruction{as: ASRAI, rd: ins.rd, rs1: ins.rd, imm: ins.imm} |
| inss = append(inss, ins2) |
| case AMOVHU, AMOVWU: |
| // Use SLLI/SRLI to extend. |
| ins.as, ins.rs1, ins.rs2 = ASLLI, uint32(p.From.Reg), obj.REG_NONE |
| if p.As == AMOVHU { |
| ins.imm = 48 |
| } else if p.As == AMOVWU { |
| ins.imm = 32 |
| } |
| ins2 := &instruction{as: ASRLI, rd: ins.rd, rs1: ins.rd, imm: ins.imm} |
| inss = append(inss, ins2) |
| } |
| |
| case ALW, ALWU, ALH, ALHU, ALB, ALBU, ALD, AFLW, AFLD: |
| if p.From.Type != obj.TYPE_MEM { |
| p.Ctxt.Diag("%v requires memory for source", p) |
| return nil |
| } |
| ins.rs1, ins.rs2 = uint32(p.From.Reg), obj.REG_NONE |
| ins.imm = p.From.Offset |
| |
| case ASW, ASH, ASB, ASD, AFSW, AFSD: |
| if p.To.Type != obj.TYPE_MEM { |
| p.Ctxt.Diag("%v requires memory for destination", p) |
| return nil |
| } |
| ins.rs1, ins.rs2 = uint32(p.From.Reg), obj.REG_NONE |
| ins.imm = p.To.Offset |
| |
| case ALRW, ALRD: |
| // Set aq to use acquire access ordering, which matches Go's memory requirements. |
| ins.funct7 = 2 |
| ins.rs1, ins.rs2 = uint32(p.From.Reg), REG_ZERO |
| |
| case ASCW, ASCD, AAMOSWAPW, AAMOSWAPD, AAMOADDW, AAMOADDD, AAMOANDW, AAMOANDD, AAMOORW, AAMOORD, |
| AAMOXORW, AAMOXORD, AAMOMINW, AAMOMIND, AAMOMINUW, AAMOMINUD, AAMOMAXW, AAMOMAXD, AAMOMAXUW, AAMOMAXUD: |
| // Set aq to use acquire access ordering, which matches Go's memory requirements. |
| ins.funct7 = 2 |
| ins.rd, ins.rs1, ins.rs2 = uint32(p.RegTo2), uint32(p.To.Reg), uint32(p.From.Reg) |
| |
| case AECALL, AEBREAK, ARDCYCLE, ARDTIME, ARDINSTRET: |
| insEnc := encode(p.As) |
| if p.To.Type == obj.TYPE_NONE { |
| ins.rd = REG_ZERO |
| } |
| ins.rs1 = REG_ZERO |
| ins.imm = insEnc.csr |
| |
| case AFENCE: |
| ins.rd, ins.rs1, ins.rs2 = REG_ZERO, REG_ZERO, obj.REG_NONE |
| ins.imm = 0x0ff |
| |
| case AFCVTWS, AFCVTLS, AFCVTWUS, AFCVTLUS, AFCVTWD, AFCVTLD, AFCVTWUD, AFCVTLUD: |
| // Set the rounding mode in funct3 to round to zero. |
| ins.funct3 = 1 |
| |
| case AFNES, AFNED: |
| // Replace FNE[SD] with FEQ[SD] and NOT. |
| if p.To.Type != obj.TYPE_REG { |
| p.Ctxt.Diag("%v needs an integer register output", ins.as) |
| return nil |
| } |
| if ins.as == AFNES { |
| ins.as = AFEQS |
| } else { |
| ins.as = AFEQD |
| } |
| ins2 := &instruction{ |
| as: AXORI, // [bit] xor 1 = not [bit] |
| rd: ins.rd, |
| rs1: ins.rd, |
| imm: 1, |
| } |
| inss = append(inss, ins2) |
| |
| case AFSQRTS, AFSQRTD: |
| // These instructions expect a zero (i.e. float register 0) |
| // to be the second input operand. |
| ins.rs1 = uint32(p.From.Reg) |
| ins.rs2 = REG_F0 |
| |
| case ANEG, ANEGW: |
| // NEG rs, rd -> SUB rs, X0, rd |
| ins.as = ASUB |
| if p.As == ANEGW { |
| ins.as = ASUBW |
| } |
| ins.rs1 = REG_ZERO |
| if ins.rd == obj.REG_NONE { |
| ins.rd = ins.rs2 |
| } |
| |
| case ANOT: |
| // NOT rs, rd -> XORI $-1, rs, rd |
| ins.as = AXORI |
| ins.rs1, ins.rs2 = uint32(p.From.Reg), obj.REG_NONE |
| if ins.rd == obj.REG_NONE { |
| ins.rd = ins.rs1 |
| } |
| ins.imm = -1 |
| |
| case ASEQZ: |
| // SEQZ rs, rd -> SLTIU $1, rs, rd |
| ins.as = ASLTIU |
| ins.rs1 = uint32(p.From.Reg) |
| ins.imm = 1 |
| |
| case ASNEZ: |
| // SNEZ rs, rd -> SLTU rs, x0, rd |
| ins.as = ASLTU |
| ins.rs1 = REG_ZERO |
| |
| case AFNEGS: |
| // FNEGS rs, rd -> FSGNJNS rs, rs, rd |
| ins.as = AFSGNJNS |
| ins.rs1 = uint32(p.From.Reg) |
| |
| case AFNEGD: |
| // FNEGD rs, rd -> FSGNJND rs, rs, rd |
| ins.as = AFSGNJND |
| ins.rs1 = uint32(p.From.Reg) |
| } |
| return inss |
| } |
| |
| // assemble emits machine code. |
| // It is called at the very end of the assembly process. |
| func assemble(ctxt *obj.Link, cursym *obj.LSym, newprog obj.ProgAlloc) { |
| if ctxt.Retpoline { |
| ctxt.Diag("-spectre=ret not supported on riscv") |
| ctxt.Retpoline = false // don't keep printing |
| } |
| |
| var symcode []uint32 |
| for p := cursym.Func().Text; p != nil; p = p.Link { |
| switch p.As { |
| case AJALR: |
| if p.To.Sym != nil { |
| // This is a CALL/JMP. We add a relocation only |
| // for linker stack checking. No actual |
| // relocation is needed. |
| rel := obj.Addrel(cursym) |
| rel.Off = int32(p.Pc) |
| rel.Siz = 4 |
| rel.Sym = p.To.Sym |
| rel.Add = p.To.Offset |
| rel.Type = objabi.R_CALLRISCV |
| } |
| case AAUIPC: |
| var rt objabi.RelocType |
| if p.Mark&NEED_PCREL_ITYPE_RELOC == NEED_PCREL_ITYPE_RELOC { |
| rt = objabi.R_RISCV_PCREL_ITYPE |
| } else if p.Mark&NEED_PCREL_STYPE_RELOC == NEED_PCREL_STYPE_RELOC { |
| rt = objabi.R_RISCV_PCREL_STYPE |
| } else { |
| break |
| } |
| if p.Link == nil { |
| ctxt.Diag("AUIPC needing PC-relative reloc missing following instruction") |
| break |
| } |
| addr := p.RestArgs[0] |
| if addr.Sym == nil { |
| ctxt.Diag("AUIPC needing PC-relative reloc missing symbol") |
| break |
| } |
| if addr.Sym.Type == objabi.STLSBSS { |
| if rt == objabi.R_RISCV_PCREL_ITYPE { |
| rt = objabi.R_RISCV_TLS_IE_ITYPE |
| } else if rt == objabi.R_RISCV_PCREL_STYPE { |
| rt = objabi.R_RISCV_TLS_IE_STYPE |
| } |
| } |
| |
| rel := obj.Addrel(cursym) |
| rel.Off = int32(p.Pc) |
| rel.Siz = 8 |
| rel.Sym = addr.Sym |
| rel.Add = addr.Offset |
| rel.Type = rt |
| } |
| |
| for _, ins := range instructionsForProg(p) { |
| ic, err := ins.encode() |
| if err == nil { |
| symcode = append(symcode, ic) |
| } |
| } |
| } |
| cursym.Size = int64(4 * len(symcode)) |
| |
| cursym.Grow(cursym.Size) |
| for p, i := cursym.P, 0; i < len(symcode); p, i = p[4:], i+1 { |
| ctxt.Arch.ByteOrder.PutUint32(p, symcode[i]) |
| } |
| |
| obj.MarkUnsafePoints(ctxt, cursym.Func().Text, newprog, isUnsafePoint, nil) |
| } |
| |
| func isUnsafePoint(p *obj.Prog) bool { |
| return p.From.Reg == REG_TMP || p.To.Reg == REG_TMP || p.Reg == REG_TMP |
| } |
| |
| var LinkRISCV64 = obj.LinkArch{ |
| Arch: sys.ArchRISCV64, |
| Init: buildop, |
| Preprocess: preprocess, |
| Assemble: assemble, |
| Progedit: progedit, |
| UnaryDst: unaryDst, |
| DWARFRegisters: RISCV64DWARFRegisters, |
| } |