| // Copyright 2020 The Go Authors. All rights reserved. | |
| // Use of this source code is governed by a BSD-style | |
| // license that can be found in the LICENSE file. | |
| package runtime | |
| import ( | |
| "internal/cpu" | |
| "runtime/internal/atomic" | |
| "runtime/internal/sys" | |
| "unsafe" | |
| ) | |
| // A spanSet is a set of *mspans. | |
| // | |
| // spanSet is safe for concurrent push and pop operations. | |
| type spanSet struct { | |
| // A spanSet is a two-level data structure consisting of a | |
| // growable spine that points to fixed-sized blocks. The spine | |
| // can be accessed without locks, but adding a block or | |
| // growing it requires taking the spine lock. | |
| // | |
| // Because each mspan covers at least 8K of heap and takes at | |
| // most 8 bytes in the spanSet, the growth of the spine is | |
| // quite limited. | |
| // | |
| // The spine and all blocks are allocated off-heap, which | |
| // allows this to be used in the memory manager and avoids the | |
| // need for write barriers on all of these. spanSetBlocks are | |
| // managed in a pool, though never freed back to the operating | |
| // system. We never release spine memory because there could be | |
| // concurrent lock-free access and we're likely to reuse it | |
| // anyway. (In principle, we could do this during STW.) | |
| spineLock mutex | |
| spine unsafe.Pointer // *[N]*spanSetBlock, accessed atomically | |
| spineLen uintptr // Spine array length, accessed atomically | |
| spineCap uintptr // Spine array cap, accessed under lock | |
| // index is the head and tail of the spanSet in a single field. | |
| // The head and the tail both represent an index into the logical | |
| // concatenation of all blocks, with the head always behind or | |
| // equal to the tail (indicating an empty set). This field is | |
| // always accessed atomically. | |
| // | |
| // The head and the tail are only 32 bits wide, which means we | |
| // can only support up to 2^32 pushes before a reset. If every | |
| // span in the heap were stored in this set, and each span were | |
| // the minimum size (1 runtime page, 8 KiB), then roughly the | |
| // smallest heap which would be unrepresentable is 32 TiB in size. | |
| index headTailIndex | |
| } | |
| const ( | |
| spanSetBlockEntries = 512 // 4KB on 64-bit | |
| spanSetInitSpineCap = 256 // Enough for 1GB heap on 64-bit | |
| ) | |
| type spanSetBlock struct { | |
| // Free spanSetBlocks are managed via a lock-free stack. | |
| lfnode | |
| // popped is the number of pop operations that have occurred on | |
| // this block. This number is used to help determine when a block | |
| // may be safely recycled. | |
| popped uint32 | |
| // spans is the set of spans in this block. | |
| spans [spanSetBlockEntries]*mspan | |
| } | |
| // push adds span s to buffer b. push is safe to call concurrently | |
| // with other push and pop operations. | |
| func (b *spanSet) push(s *mspan) { | |
| // Obtain our slot. | |
| cursor := uintptr(b.index.incTail().tail() - 1) | |
| top, bottom := cursor/spanSetBlockEntries, cursor%spanSetBlockEntries | |
| // Do we need to add a block? | |
| spineLen := atomic.Loaduintptr(&b.spineLen) | |
| var block *spanSetBlock | |
| retry: | |
| if top < spineLen { | |
| spine := atomic.Loadp(unsafe.Pointer(&b.spine)) | |
| blockp := add(spine, sys.PtrSize*top) | |
| block = (*spanSetBlock)(atomic.Loadp(blockp)) | |
| } else { | |
| // Add a new block to the spine, potentially growing | |
| // the spine. | |
| lock(&b.spineLock) | |
| // spineLen cannot change until we release the lock, | |
| // but may have changed while we were waiting. | |
| spineLen = atomic.Loaduintptr(&b.spineLen) | |
| if top < spineLen { | |
| unlock(&b.spineLock) | |
| goto retry | |
| } | |
| if spineLen == b.spineCap { | |
| // Grow the spine. | |
| newCap := b.spineCap * 2 | |
| if newCap == 0 { | |
| newCap = spanSetInitSpineCap | |
| } | |
| newSpine := persistentalloc(newCap*sys.PtrSize, cpu.CacheLineSize, &memstats.gcMiscSys) | |
| if b.spineCap != 0 { | |
| // Blocks are allocated off-heap, so | |
| // no write barriers. | |
| memmove(newSpine, b.spine, b.spineCap*sys.PtrSize) | |
| } | |
| // Spine is allocated off-heap, so no write barrier. | |
| atomic.StorepNoWB(unsafe.Pointer(&b.spine), newSpine) | |
| b.spineCap = newCap | |
| // We can't immediately free the old spine | |
| // since a concurrent push with a lower index | |
| // could still be reading from it. We let it | |
| // leak because even a 1TB heap would waste | |
| // less than 2MB of memory on old spines. If | |
| // this is a problem, we could free old spines | |
| // during STW. | |
| } | |
| // Allocate a new block from the pool. | |
| block = spanSetBlockPool.alloc() | |
| // Add it to the spine. | |
| blockp := add(b.spine, sys.PtrSize*top) | |
| // Blocks are allocated off-heap, so no write barrier. | |
| atomic.StorepNoWB(blockp, unsafe.Pointer(block)) | |
| atomic.Storeuintptr(&b.spineLen, spineLen+1) | |
| unlock(&b.spineLock) | |
| } | |
| // We have a block. Insert the span atomically, since there may be | |
| // concurrent readers via the block API. | |
| atomic.StorepNoWB(unsafe.Pointer(&block.spans[bottom]), unsafe.Pointer(s)) | |
| } | |
| // pop removes and returns a span from buffer b, or nil if b is empty. | |
| // pop is safe to call concurrently with other pop and push operations. | |
| func (b *spanSet) pop() *mspan { | |
| var head, tail uint32 | |
| claimLoop: | |
| for { | |
| headtail := b.index.load() | |
| head, tail = headtail.split() | |
| if head >= tail { | |
| // The buf is empty, as far as we can tell. | |
| return nil | |
| } | |
| // Check if the head position we want to claim is actually | |
| // backed by a block. | |
| spineLen := atomic.Loaduintptr(&b.spineLen) | |
| if spineLen <= uintptr(head)/spanSetBlockEntries { | |
| // We're racing with a spine growth and the allocation of | |
| // a new block (and maybe a new spine!), and trying to grab | |
| // the span at the index which is currently being pushed. | |
| // Instead of spinning, let's just notify the caller that | |
| // there's nothing currently here. Spinning on this is | |
| // almost definitely not worth it. | |
| return nil | |
| } | |
| // Try to claim the current head by CASing in an updated head. | |
| // This may fail transiently due to a push which modifies the | |
| // tail, so keep trying while the head isn't changing. | |
| want := head | |
| for want == head { | |
| if b.index.cas(headtail, makeHeadTailIndex(want+1, tail)) { | |
| break claimLoop | |
| } | |
| headtail = b.index.load() | |
| head, tail = headtail.split() | |
| } | |
| // We failed to claim the spot we were after and the head changed, | |
| // meaning a popper got ahead of us. Try again from the top because | |
| // the buf may not be empty. | |
| } | |
| top, bottom := head/spanSetBlockEntries, head%spanSetBlockEntries | |
| // We may be reading a stale spine pointer, but because the length | |
| // grows monotonically and we've already verified it, we'll definitely | |
| // be reading from a valid block. | |
| spine := atomic.Loadp(unsafe.Pointer(&b.spine)) | |
| blockp := add(spine, sys.PtrSize*uintptr(top)) | |
| // Given that the spine length is correct, we know we will never | |
| // see a nil block here, since the length is always updated after | |
| // the block is set. | |
| block := (*spanSetBlock)(atomic.Loadp(blockp)) | |
| s := (*mspan)(atomic.Loadp(unsafe.Pointer(&block.spans[bottom]))) | |
| for s == nil { | |
| // We raced with the span actually being set, but given that we | |
| // know a block for this span exists, the race window here is | |
| // extremely small. Try again. | |
| s = (*mspan)(atomic.Loadp(unsafe.Pointer(&block.spans[bottom]))) | |
| } | |
| // Clear the pointer. This isn't strictly necessary, but defensively | |
| // avoids accidentally re-using blocks which could lead to memory | |
| // corruption. This way, we'll get a nil pointer access instead. | |
| atomic.StorepNoWB(unsafe.Pointer(&block.spans[bottom]), nil) | |
| // Increase the popped count. If we are the last possible popper | |
| // in the block (note that bottom need not equal spanSetBlockEntries-1 | |
| // due to races) then it's our resposibility to free the block. | |
| // | |
| // If we increment popped to spanSetBlockEntries, we can be sure that | |
| // we're the last popper for this block, and it's thus safe to free it. | |
| // Every other popper must have crossed this barrier (and thus finished | |
| // popping its corresponding mspan) by the time we get here. Because | |
| // we're the last popper, we also don't have to worry about concurrent | |
| // pushers (there can't be any). Note that we may not be the popper | |
| // which claimed the last slot in the block, we're just the last one | |
| // to finish popping. | |
| if atomic.Xadd(&block.popped, 1) == spanSetBlockEntries { | |
| // Clear the block's pointer. | |
| atomic.StorepNoWB(blockp, nil) | |
| // Return the block to the block pool. | |
| spanSetBlockPool.free(block) | |
| } | |
| return s | |
| } | |
| // reset resets a spanSet which is empty. It will also clean up | |
| // any left over blocks. | |
| // | |
| // Throws if the buf is not empty. | |
| // | |
| // reset may not be called concurrently with any other operations | |
| // on the span set. | |
| func (b *spanSet) reset() { | |
| head, tail := b.index.load().split() | |
| if head < tail { | |
| print("head = ", head, ", tail = ", tail, "\n") | |
| throw("attempt to clear non-empty span set") | |
| } | |
| top := head / spanSetBlockEntries | |
| if uintptr(top) < b.spineLen { | |
| // If the head catches up to the tail and the set is empty, | |
| // we may not clean up the block containing the head and tail | |
| // since it may be pushed into again. In order to avoid leaking | |
| // memory since we're going to reset the head and tail, clean | |
| // up such a block now, if it exists. | |
| blockp := (**spanSetBlock)(add(b.spine, sys.PtrSize*uintptr(top))) | |
| block := *blockp | |
| if block != nil { | |
| // Sanity check the popped value. | |
| if block.popped == 0 { | |
| // popped should never be zero because that means we have | |
| // pushed at least one value but not yet popped if this | |
| // block pointer is not nil. | |
| throw("span set block with unpopped elements found in reset") | |
| } | |
| if block.popped == spanSetBlockEntries { | |
| // popped should also never be equal to spanSetBlockEntries | |
| // because the last popper should have made the block pointer | |
| // in this slot nil. | |
| throw("fully empty unfreed span set block found in reset") | |
| } | |
| // Clear the pointer to the block. | |
| atomic.StorepNoWB(unsafe.Pointer(blockp), nil) | |
| // Return the block to the block pool. | |
| spanSetBlockPool.free(block) | |
| } | |
| } | |
| b.index.reset() | |
| atomic.Storeuintptr(&b.spineLen, 0) | |
| } | |
| // spanSetBlockPool is a global pool of spanSetBlocks. | |
| var spanSetBlockPool spanSetBlockAlloc | |
| // spanSetBlockAlloc represents a concurrent pool of spanSetBlocks. | |
| type spanSetBlockAlloc struct { | |
| stack lfstack | |
| } | |
| // alloc tries to grab a spanSetBlock out of the pool, and if it fails | |
| // persistentallocs a new one and returns it. | |
| func (p *spanSetBlockAlloc) alloc() *spanSetBlock { | |
| if s := (*spanSetBlock)(p.stack.pop()); s != nil { | |
| return s | |
| } | |
| return (*spanSetBlock)(persistentalloc(unsafe.Sizeof(spanSetBlock{}), cpu.CacheLineSize, &memstats.gcMiscSys)) | |
| } | |
| // free returns a spanSetBlock back to the pool. | |
| func (p *spanSetBlockAlloc) free(block *spanSetBlock) { | |
| atomic.Store(&block.popped, 0) | |
| p.stack.push(&block.lfnode) | |
| } | |
| // haidTailIndex represents a combined 32-bit head and 32-bit tail | |
| // of a queue into a single 64-bit value. | |
| type headTailIndex uint64 | |
| // makeHeadTailIndex creates a headTailIndex value from a separate | |
| // head and tail. | |
| func makeHeadTailIndex(head, tail uint32) headTailIndex { | |
| return headTailIndex(uint64(head)<<32 | uint64(tail)) | |
| } | |
| // head returns the head of a headTailIndex value. | |
| func (h headTailIndex) head() uint32 { | |
| return uint32(h >> 32) | |
| } | |
| // tail returns the tail of a headTailIndex value. | |
| func (h headTailIndex) tail() uint32 { | |
| return uint32(h) | |
| } | |
| // split splits the headTailIndex value into its parts. | |
| func (h headTailIndex) split() (head uint32, tail uint32) { | |
| return h.head(), h.tail() | |
| } | |
| // load atomically reads a headTailIndex value. | |
| func (h *headTailIndex) load() headTailIndex { | |
| return headTailIndex(atomic.Load64((*uint64)(h))) | |
| } | |
| // cas atomically compares-and-swaps a headTailIndex value. | |
| func (h *headTailIndex) cas(old, new headTailIndex) bool { | |
| return atomic.Cas64((*uint64)(h), uint64(old), uint64(new)) | |
| } | |
| // incHead atomically increments the head of a headTailIndex. | |
| func (h *headTailIndex) incHead() headTailIndex { | |
| return headTailIndex(atomic.Xadd64((*uint64)(h), (1 << 32))) | |
| } | |
| // decHead atomically decrements the head of a headTailIndex. | |
| func (h *headTailIndex) decHead() headTailIndex { | |
| return headTailIndex(atomic.Xadd64((*uint64)(h), -(1 << 32))) | |
| } | |
| // incTail atomically increments the tail of a headTailIndex. | |
| func (h *headTailIndex) incTail() headTailIndex { | |
| ht := headTailIndex(atomic.Xadd64((*uint64)(h), +1)) | |
| // Check for overflow. | |
| if ht.tail() == 0 { | |
| print("runtime: head = ", ht.head(), ", tail = ", ht.tail(), "\n") | |
| throw("headTailIndex overflow") | |
| } | |
| return ht | |
| } | |
| // reset clears the headTailIndex to (0, 0). | |
| func (h *headTailIndex) reset() { | |
| atomic.Store64((*uint64)(h), 0) | |
| } |