| // errorcheck -0 -N -m -l |
| |
| // Copyright 2010 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // Test, using compiler diagnostic flags, that the escape analysis is working. |
| // Compiles but does not run. Inlining is disabled. |
| // Registerization is disabled too (-N), which should |
| // have no effect on escape analysis. |
| |
| package foo |
| |
| import ( |
| "fmt" |
| "unsafe" |
| ) |
| |
| var gxx *int |
| |
| func foo1(x int) { // ERROR "moved to heap: x$" |
| gxx = &x // ERROR "&x escapes to heap$" |
| } |
| |
| func foo2(yy *int) { // ERROR "leaking param: yy$" |
| gxx = yy |
| } |
| |
| func foo3(x int) *int { // ERROR "moved to heap: x$" |
| return &x // ERROR "&x escapes to heap$" |
| } |
| |
| type T *T |
| |
| func foo3b(t T) { // ERROR "leaking param: t$" |
| *t = t |
| } |
| |
| // xx isn't going anywhere, so use of yy is ok |
| func foo4(xx, yy *int) { // ERROR "foo4 xx does not escape$" "foo4 yy does not escape$" |
| xx = yy |
| } |
| |
| // xx isn't going anywhere, so taking address of yy is ok |
| func foo5(xx **int, yy *int) { // ERROR "foo5 xx does not escape$" "foo5 yy does not escape$" |
| xx = &yy // ERROR "foo5 &yy does not escape$" |
| } |
| |
| func foo6(xx **int, yy *int) { // ERROR "foo6 xx does not escape$" "leaking param: yy$" |
| *xx = yy |
| } |
| |
| func foo7(xx **int, yy *int) { // ERROR "foo7 xx does not escape$" "foo7 yy does not escape$" |
| **xx = *yy |
| } |
| |
| func foo8(xx, yy *int) int { // ERROR "foo8 xx does not escape$" "foo8 yy does not escape$" |
| xx = yy |
| return *xx |
| } |
| |
| func foo9(xx, yy *int) *int { // ERROR "leaking param: xx to result ~r2 level=0$" "leaking param: yy to result ~r2 level=0$" |
| xx = yy |
| return xx |
| } |
| |
| func foo10(xx, yy *int) { // ERROR "foo10 xx does not escape$" "foo10 yy does not escape$" |
| *xx = *yy |
| } |
| |
| func foo11() int { |
| x, y := 0, 42 |
| xx := &x // ERROR "foo11 &x does not escape$" |
| yy := &y // ERROR "foo11 &y does not escape$" |
| *xx = *yy |
| return x |
| } |
| |
| var xxx **int |
| |
| func foo12(yyy **int) { // ERROR "leaking param: yyy$" |
| xxx = yyy |
| } |
| |
| // Must treat yyy as leaking because *yyy leaks, and the escape analysis |
| // summaries in exported metadata do not distinguish these two cases. |
| func foo13(yyy **int) { // ERROR "leaking param content: yyy$" |
| *xxx = *yyy |
| } |
| |
| func foo14(yyy **int) { // ERROR "foo14 yyy does not escape$" |
| **xxx = **yyy |
| } |
| |
| func foo15(yy *int) { // ERROR "moved to heap: yy$" |
| xxx = &yy // ERROR "&yy escapes to heap$" |
| } |
| |
| func foo16(yy *int) { // ERROR "leaking param: yy$" |
| *xxx = yy |
| } |
| |
| func foo17(yy *int) { // ERROR "foo17 yy does not escape$" |
| **xxx = *yy |
| } |
| |
| func foo18(y int) { // ERROR "moved to heap: y$" |
| *xxx = &y // ERROR "&y escapes to heap$" |
| } |
| |
| func foo19(y int) { |
| **xxx = y |
| } |
| |
| type Bar struct { |
| i int |
| ii *int |
| } |
| |
| func NewBar() *Bar { |
| return &Bar{42, nil} // ERROR "&Bar literal escapes to heap$" |
| } |
| |
| func NewBarp(x *int) *Bar { // ERROR "leaking param: x to result ~r1 level=-1$" |
| return &Bar{42, x} // ERROR "&Bar literal escapes to heap$" |
| } |
| |
| func NewBarp2(x *int) *Bar { // ERROR "NewBarp2 x does not escape$" |
| return &Bar{*x, nil} // ERROR "&Bar literal escapes to heap$" |
| } |
| |
| func (b *Bar) NoLeak() int { // ERROR "\(\*Bar\).NoLeak b does not escape$" |
| return *(b.ii) |
| } |
| |
| func (b *Bar) Leak() *int { // ERROR "leaking param: b to result ~r0 level=0$" |
| return &b.i // ERROR "&b.i escapes to heap$" |
| } |
| |
| func (b *Bar) AlsoNoLeak() *int { // ERROR "leaking param: b to result ~r0 level=1$" |
| return b.ii |
| } |
| |
| func (b Bar) AlsoLeak() *int { // ERROR "leaking param: b to result ~r0 level=0$" |
| return b.ii |
| } |
| |
| func (b Bar) LeaksToo() *int { // ERROR "leaking param: b to result ~r0 level=0$" |
| v := 0 // ERROR "moved to heap: v$" |
| b.ii = &v // ERROR "&v escapes to heap$" |
| return b.ii |
| } |
| |
| func (b *Bar) LeaksABit() *int { // ERROR "leaking param: b to result ~r0 level=1$" |
| v := 0 // ERROR "moved to heap: v$" |
| b.ii = &v // ERROR "&v escapes to heap$" |
| return b.ii |
| } |
| |
| func (b Bar) StillNoLeak() int { // ERROR "Bar.StillNoLeak b does not escape$" |
| v := 0 |
| b.ii = &v // ERROR "Bar.StillNoLeak &v does not escape$" |
| return b.i |
| } |
| |
| func goLeak(b *Bar) { // ERROR "leaking param: b$" |
| go b.NoLeak() |
| } |
| |
| type Bar2 struct { |
| i [12]int |
| ii []int |
| } |
| |
| func NewBar2() *Bar2 { |
| return &Bar2{[12]int{42}, nil} // ERROR "&Bar2 literal escapes to heap$" |
| } |
| |
| func (b *Bar2) NoLeak() int { // ERROR "\(\*Bar2\).NoLeak b does not escape$" |
| return b.i[0] |
| } |
| |
| func (b *Bar2) Leak() []int { // ERROR "leaking param: b to result ~r0 level=0$" |
| return b.i[:] // ERROR "b.i escapes to heap$" |
| } |
| |
| func (b *Bar2) AlsoNoLeak() []int { // ERROR "leaking param: b to result ~r0 level=1$" |
| return b.ii[0:1] |
| } |
| |
| func (b Bar2) AgainNoLeak() [12]int { // ERROR "Bar2.AgainNoLeak b does not escape$" |
| return b.i |
| } |
| |
| func (b *Bar2) LeakSelf() { // ERROR "leaking param: b$" |
| b.ii = b.i[0:4] // ERROR "b.i escapes to heap$" |
| } |
| |
| func (b *Bar2) LeakSelf2() { // ERROR "leaking param: b$" |
| var buf []int |
| buf = b.i[0:] // ERROR "b.i escapes to heap$" |
| b.ii = buf |
| } |
| |
| func foo21() func() int { |
| x := 42 |
| return func() int { // ERROR "func literal escapes to heap$" |
| return x |
| } |
| } |
| |
| func foo21a() func() int { |
| x := 42 // ERROR "moved to heap: x$" |
| return func() int { // ERROR "func literal escapes to heap$" |
| x++ // ERROR "&x escapes to heap$" |
| return x |
| } |
| } |
| |
| func foo22() int { |
| x := 42 |
| return func() int { // ERROR "foo22 func literal does not escape$" |
| return x |
| }() |
| } |
| |
| func foo23(x int) func() int { |
| return func() int { // ERROR "func literal escapes to heap$" |
| return x |
| } |
| } |
| |
| func foo23a(x int) func() int { |
| f := func() int { // ERROR "func literal escapes to heap$" |
| return x |
| } |
| return f |
| } |
| |
| func foo23b(x int) *(func() int) { |
| f := func() int { return x } // ERROR "func literal escapes to heap$" "moved to heap: f$" |
| return &f // ERROR "&f escapes to heap$" |
| } |
| |
| func foo23c(x int) func() int { // ERROR "moved to heap: x$" |
| return func() int { // ERROR "func literal escapes to heap$" |
| x++ // ERROR "&x escapes to heap$" |
| return x |
| } |
| } |
| |
| func foo24(x int) int { |
| return func() int { // ERROR "foo24 func literal does not escape$" |
| return x |
| }() |
| } |
| |
| var x *int |
| |
| func fooleak(xx *int) int { // ERROR "leaking param: xx$" |
| x = xx |
| return *x |
| } |
| |
| func foonoleak(xx *int) int { // ERROR "foonoleak xx does not escape$" |
| return *x + *xx |
| } |
| |
| func foo31(x int) int { // ERROR "moved to heap: x$" |
| return fooleak(&x) // ERROR "&x escapes to heap$" |
| } |
| |
| func foo32(x int) int { |
| return foonoleak(&x) // ERROR "foo32 &x does not escape$" |
| } |
| |
| type Foo struct { |
| xx *int |
| x int |
| } |
| |
| var F Foo |
| var pf *Foo |
| |
| func (f *Foo) fooleak() { // ERROR "leaking param: f$" |
| pf = f |
| } |
| |
| func (f *Foo) foonoleak() { // ERROR "\(\*Foo\).foonoleak f does not escape$" |
| F.x = f.x |
| } |
| |
| func (f *Foo) Leak() { // ERROR "leaking param: f$" |
| f.fooleak() |
| } |
| |
| func (f *Foo) NoLeak() { // ERROR "\(\*Foo\).NoLeak f does not escape$" |
| f.foonoleak() |
| } |
| |
| func foo41(x int) { // ERROR "moved to heap: x$" |
| F.xx = &x // ERROR "&x escapes to heap$" |
| } |
| |
| func (f *Foo) foo42(x int) { // ERROR "\(\*Foo\).foo42 f does not escape$" "moved to heap: x$" |
| f.xx = &x // ERROR "&x escapes to heap$" |
| } |
| |
| func foo43(f *Foo, x int) { // ERROR "foo43 f does not escape$" "moved to heap: x$" |
| f.xx = &x // ERROR "&x escapes to heap$" |
| } |
| |
| func foo44(yy *int) { // ERROR "leaking param: yy$" |
| F.xx = yy |
| } |
| |
| func (f *Foo) foo45() { // ERROR "\(\*Foo\).foo45 f does not escape$" |
| F.x = f.x |
| } |
| |
| // See foo13 above for explanation of why f leaks. |
| func (f *Foo) foo46() { // ERROR "leaking param content: f$" |
| F.xx = f.xx |
| } |
| |
| func (f *Foo) foo47() { // ERROR "leaking param: f$" |
| f.xx = &f.x // ERROR "&f.x escapes to heap$" |
| } |
| |
| var ptrSlice []*int |
| |
| func foo50(i *int) { // ERROR "leaking param: i$" |
| ptrSlice[0] = i |
| } |
| |
| var ptrMap map[*int]*int |
| |
| func foo51(i *int) { // ERROR "leaking param: i$" |
| ptrMap[i] = i |
| } |
| |
| func indaddr1(x int) *int { // ERROR "moved to heap: x$" |
| return &x // ERROR "&x escapes to heap$" |
| } |
| |
| func indaddr2(x *int) *int { // ERROR "leaking param: x to result ~r1 level=0$" |
| return *&x // ERROR "indaddr2 &x does not escape$" |
| } |
| |
| func indaddr3(x *int32) *int { // ERROR "leaking param: x to result ~r1 level=0$" |
| return *(**int)(unsafe.Pointer(&x)) // ERROR "indaddr3 &x does not escape$" |
| } |
| |
| // From package math: |
| |
| func Float32bits(f float32) uint32 { |
| return *(*uint32)(unsafe.Pointer(&f)) // ERROR "Float32bits &f does not escape$" |
| } |
| |
| func Float32frombits(b uint32) float32 { |
| return *(*float32)(unsafe.Pointer(&b)) // ERROR "Float32frombits &b does not escape$" |
| } |
| |
| func Float64bits(f float64) uint64 { |
| return *(*uint64)(unsafe.Pointer(&f)) // ERROR "Float64bits &f does not escape$" |
| } |
| |
| func Float64frombits(b uint64) float64 { |
| return *(*float64)(unsafe.Pointer(&b)) // ERROR "Float64frombits &b does not escape$" |
| } |
| |
| // contrast with |
| func float64bitsptr(f float64) *uint64 { // ERROR "moved to heap: f$" |
| return (*uint64)(unsafe.Pointer(&f)) // ERROR "&f escapes to heap$" |
| } |
| |
| func float64ptrbitsptr(f *float64) *uint64 { // ERROR "leaking param: f to result ~r1 level=0$" |
| return (*uint64)(unsafe.Pointer(f)) |
| } |
| |
| func typesw(i interface{}) *int { // ERROR "leaking param: i to result ~r1 level=0$" |
| switch val := i.(type) { |
| case *int: |
| return val |
| case *int8: |
| v := int(*val) // ERROR "moved to heap: v$" |
| return &v // ERROR "&v escapes to heap$" |
| } |
| return nil |
| } |
| |
| func exprsw(i *int) *int { // ERROR "leaking param: i to result ~r1 level=0$" |
| switch j := i; *j + 110 { |
| case 12: |
| return j |
| case 42: |
| return nil |
| } |
| return nil |
| |
| } |
| |
| // assigning to an array element is like assigning to the array |
| func foo60(i *int) *int { // ERROR "leaking param: i to result ~r1 level=0$" |
| var a [12]*int |
| a[0] = i |
| return a[1] |
| } |
| |
| func foo60a(i *int) *int { // ERROR "foo60a i does not escape$" |
| var a [12]*int |
| a[0] = i |
| return nil |
| } |
| |
| // assigning to a struct field is like assigning to the struct |
| func foo61(i *int) *int { // ERROR "leaking param: i to result ~r1 level=0$" |
| type S struct { |
| a, b *int |
| } |
| var s S |
| s.a = i |
| return s.b |
| } |
| |
| func foo61a(i *int) *int { // ERROR "foo61a i does not escape$" |
| type S struct { |
| a, b *int |
| } |
| var s S |
| s.a = i |
| return nil |
| } |
| |
| // assigning to a struct field is like assigning to the struct but |
| // here this subtlety is lost, since s.a counts as an assignment to a |
| // track-losing dereference. |
| func foo62(i *int) *int { // ERROR "leaking param: i$" |
| type S struct { |
| a, b *int |
| } |
| s := new(S) // ERROR "foo62 new\(S\) does not escape$" |
| s.a = i |
| return nil // s.b |
| } |
| |
| type M interface { |
| M() |
| } |
| |
| func foo63(m M) { // ERROR "foo63 m does not escape$" |
| } |
| |
| func foo64(m M) { // ERROR "leaking param: m$" |
| m.M() |
| } |
| |
| func foo64b(m M) { // ERROR "leaking param: m$" |
| defer m.M() |
| } |
| |
| type MV int |
| |
| func (MV) M() {} |
| |
| func foo65() { |
| var mv MV |
| foo63(&mv) // ERROR "foo65 &mv does not escape$" |
| } |
| |
| func foo66() { |
| var mv MV // ERROR "moved to heap: mv$" |
| foo64(&mv) // ERROR "&mv escapes to heap$" |
| } |
| |
| func foo67() { |
| var mv MV |
| foo63(mv) // ERROR "foo67 mv does not escape$" |
| } |
| |
| func foo68() { |
| var mv MV |
| // escapes but it's an int so irrelevant |
| foo64(mv) // ERROR "mv escapes to heap$" |
| } |
| |
| func foo69(m M) { // ERROR "leaking param: m$" |
| foo64(m) |
| } |
| |
| func foo70(mv1 *MV, m M) { // ERROR "leaking param: m$" "leaking param: mv1$" |
| m = mv1 // ERROR "mv1 escapes to heap$" |
| foo64(m) |
| } |
| |
| func foo71(x *int) []*int { // ERROR "leaking param: x$" |
| var y []*int |
| y = append(y, x) |
| return y |
| } |
| |
| func foo71a(x int) []*int { // ERROR "moved to heap: x$" |
| var y []*int |
| y = append(y, &x) // ERROR "&x escapes to heap$" |
| return y |
| } |
| |
| func foo72() { |
| var x int |
| var y [1]*int |
| y[0] = &x // ERROR "foo72 &x does not escape$" |
| } |
| |
| func foo72aa() [10]*int { |
| var x int // ERROR "moved to heap: x$" |
| var y [10]*int |
| y[0] = &x // ERROR "&x escapes to heap$" |
| return y |
| } |
| |
| func foo72a() { |
| var y [10]*int |
| for i := 0; i < 10; i++ { |
| // escapes its scope |
| x := i // ERROR "moved to heap: x$" |
| y[i] = &x // ERROR "&x escapes to heap$" |
| } |
| return |
| } |
| |
| func foo72b() [10]*int { |
| var y [10]*int |
| for i := 0; i < 10; i++ { |
| x := i // ERROR "moved to heap: x$" |
| y[i] = &x // ERROR "&x escapes to heap$" |
| } |
| return y |
| } |
| |
| // issue 2145 |
| func foo73() { |
| s := []int{3, 2, 1} // ERROR "foo73 \[\]int literal does not escape$" |
| for _, v := range s { |
| vv := v |
| // actually just escapes its scope |
| defer func() { // ERROR "func literal escapes to heap$" |
| println(vv) |
| }() |
| } |
| } |
| |
| func foo731() { |
| s := []int{3, 2, 1} // ERROR "foo731 \[\]int literal does not escape$" |
| for _, v := range s { |
| vv := v // ERROR "moved to heap: vv$" |
| // actually just escapes its scope |
| defer func() { // ERROR "func literal escapes to heap$" |
| vv = 42 // ERROR "&vv escapes to heap$" |
| println(vv) |
| }() |
| } |
| } |
| |
| func foo74() { |
| s := []int{3, 2, 1} // ERROR "foo74 \[\]int literal does not escape$" |
| for _, v := range s { |
| vv := v |
| // actually just escapes its scope |
| fn := func() { // ERROR "func literal escapes to heap$" |
| println(vv) |
| } |
| defer fn() |
| } |
| } |
| |
| func foo74a() { |
| s := []int{3, 2, 1} // ERROR "foo74a \[\]int literal does not escape$" |
| for _, v := range s { |
| vv := v // ERROR "moved to heap: vv$" |
| // actually just escapes its scope |
| fn := func() { // ERROR "func literal escapes to heap$" |
| vv += 1 // ERROR "&vv escapes to heap$" |
| println(vv) |
| } |
| defer fn() |
| } |
| } |
| |
| // issue 3975 |
| func foo74b() { |
| var array [3]func() |
| s := []int{3, 2, 1} // ERROR "foo74b \[\]int literal does not escape$" |
| for i, v := range s { |
| vv := v |
| // actually just escapes its scope |
| array[i] = func() { // ERROR "func literal escapes to heap$" |
| println(vv) |
| } |
| } |
| } |
| |
| func foo74c() { |
| var array [3]func() |
| s := []int{3, 2, 1} // ERROR "foo74c \[\]int literal does not escape$" |
| for i, v := range s { |
| vv := v // ERROR "moved to heap: vv$" |
| // actually just escapes its scope |
| array[i] = func() { // ERROR "func literal escapes to heap$" |
| println(&vv) // ERROR "&vv escapes to heap$" "foo74c.func1 &vv does not escape$" |
| } |
| } |
| } |
| |
| func myprint(y *int, x ...interface{}) *int { // ERROR "leaking param: y to result ~r2 level=0$" "myprint x does not escape$" |
| return y |
| } |
| |
| func myprint1(y *int, x ...interface{}) *interface{} { // ERROR "leaking param: x to result ~r2 level=0$" "myprint1 y does not escape$" |
| return &x[0] // ERROR "&x\[0\] escapes to heap$" |
| } |
| |
| func foo75(z *int) { // ERROR "foo75 z does not escape$" |
| myprint(z, 1, 2, 3) // ERROR "1 does not escape" "2 does not escape" "3 does not escape" "foo75 ... argument does not escape$" |
| } |
| |
| func foo75a(z *int) { // ERROR "foo75a z does not escape$" |
| myprint1(z, 1, 2, 3) // ERROR "1 does not escape" "2 does not escape" "3 does not escape" "foo75a ... argument does not escape$" |
| } |
| |
| func foo75esc(z *int) { // ERROR "leaking param: z$" |
| gxx = myprint(z, 1, 2, 3) // ERROR "1 does not escape" "2 does not escape" "3 does not escape" "foo75esc ... argument does not escape$" |
| } |
| |
| func foo75aesc(z *int) { // ERROR "foo75aesc z does not escape$" |
| var ppi **interface{} // assignments to pointer dereferences lose track |
| *ppi = myprint1(z, 1, 2, 3) // ERROR "... argument escapes to heap$" "1 escapes to heap$" "2 escapes to heap$" "3 escapes to heap$" |
| } |
| |
| func foo75aesc1(z *int) { // ERROR "foo75aesc1 z does not escape$" |
| sink = myprint1(z, 1, 2, 3) // ERROR "... argument escapes to heap$" "1 escapes to heap$" "2 escapes to heap$" "3 escapes to heap$" "myprint1\(z, 1, 2, 3\) escapes to heap$" |
| } |
| |
| func foo76(z *int) { // ERROR "z does not escape" |
| myprint(nil, z) // ERROR "foo76 ... argument does not escape$" "z does not escape" |
| } |
| |
| func foo76a(z *int) { // ERROR "z does not escape" |
| myprint1(nil, z) // ERROR "foo76a ... argument does not escape$" "z does not escape" |
| } |
| |
| func foo76b() { |
| myprint(nil, 1, 2, 3) // ERROR "1 does not escape" "2 does not escape" "3 does not escape" "foo76b ... argument does not escape$" |
| } |
| |
| func foo76c() { |
| myprint1(nil, 1, 2, 3) // ERROR "1 does not escape" "2 does not escape" "3 does not escape" "foo76c ... argument does not escape$" |
| } |
| |
| func foo76d() { |
| defer myprint(nil, 1, 2, 3) // ERROR "1 does not escape" "2 does not escape" "3 does not escape" "foo76d ... argument does not escape$" |
| } |
| |
| func foo76e() { |
| defer myprint1(nil, 1, 2, 3) // ERROR "1 does not escape" "2 does not escape" "3 does not escape" "foo76e ... argument does not escape$" |
| } |
| |
| func foo76f() { |
| for { |
| // TODO: This one really only escapes its scope, but we don't distinguish yet. |
| defer myprint(nil, 1, 2, 3) // ERROR "... argument escapes to heap$" "1 escapes to heap$" "2 escapes to heap$" "3 escapes to heap$" |
| } |
| } |
| |
| func foo76g() { |
| for { |
| defer myprint1(nil, 1, 2, 3) // ERROR "... argument escapes to heap$" "1 escapes to heap$" "2 escapes to heap$" "3 escapes to heap$" |
| } |
| } |
| |
| func foo77(z []interface{}) { // ERROR "foo77 z does not escape$" |
| myprint(nil, z...) // z does not escape |
| } |
| |
| func foo77a(z []interface{}) { // ERROR "foo77a z does not escape$" |
| myprint1(nil, z...) |
| } |
| |
| func foo77b(z []interface{}) { // ERROR "leaking param: z$" |
| var ppi **interface{} |
| *ppi = myprint1(nil, z...) |
| } |
| |
| func foo77c(z []interface{}) { // ERROR "leaking param: z$" |
| sink = myprint1(nil, z...) // ERROR "myprint1\(nil, z...\) escapes to heap$" |
| } |
| |
| func dotdotdot() { |
| i := 0 |
| myprint(nil, &i) // ERROR "&i does not escape" "dotdotdot ... argument does not escape$" |
| |
| j := 0 |
| myprint1(nil, &j) // ERROR "&j does not escape" "dotdotdot ... argument does not escape$" |
| } |
| |
| func foo78(z int) *int { // ERROR "moved to heap: z$" |
| return &z // ERROR "&z escapes to heap$" |
| } |
| |
| func foo78a(z int) *int { // ERROR "moved to heap: z$" |
| y := &z // ERROR "&z escapes to heap$" |
| x := &y // ERROR "foo78a &y does not escape$" |
| return *x // really return y |
| } |
| |
| func foo79() *int { |
| return new(int) // ERROR "new\(int\) escapes to heap$" |
| } |
| |
| func foo80() *int { |
| var z *int |
| for { |
| // Really just escapes its scope but we don't distinguish |
| z = new(int) // ERROR "new\(int\) escapes to heap$" |
| } |
| _ = z |
| return nil |
| } |
| |
| func foo81() *int { |
| for { |
| z := new(int) // ERROR "foo81 new\(int\) does not escape$" |
| _ = z |
| } |
| return nil |
| } |
| |
| func tee(p *int) (x, y *int) { return p, p } // ERROR "leaking param: p to result x level=0$" "leaking param: p to result y level=0$" |
| |
| func noop(x, y *int) {} // ERROR "noop x does not escape$" "noop y does not escape$" |
| |
| func foo82() { |
| var x, y, z int // ERROR "moved to heap: x$" "moved to heap: y$" "moved to heap: z$" |
| go noop(tee(&z)) // ERROR "&z escapes to heap$" |
| go noop(&x, &y) // ERROR "&x escapes to heap$" "&y escapes to heap$" |
| for { |
| var u, v, w int // ERROR "moved to heap: u$" "moved to heap: v$" "moved to heap: w$" |
| defer noop(tee(&u)) // ERROR "&u escapes to heap$" |
| defer noop(&v, &w) // ERROR "&v escapes to heap$" "&w escapes to heap$" |
| } |
| } |
| |
| type Fooer interface { |
| Foo() |
| } |
| |
| type LimitedFooer struct { |
| Fooer |
| N int64 |
| } |
| |
| func LimitFooer(r Fooer, n int64) Fooer { // ERROR "leaking param: r to result ~r2 level=-1$" |
| return &LimitedFooer{r, n} // ERROR "&LimitedFooer literal escapes to heap$" |
| } |
| |
| func foo90(x *int) map[*int]*int { // ERROR "leaking param: x$" |
| return map[*int]*int{nil: x} // ERROR "map\[\*int\]\*int literal escapes to heap$" |
| } |
| |
| func foo91(x *int) map[*int]*int { // ERROR "leaking param: x$" |
| return map[*int]*int{x: nil} // ERROR "map\[\*int\]\*int literal escapes to heap$" |
| } |
| |
| func foo92(x *int) [2]*int { // ERROR "leaking param: x to result ~r1 level=0$" |
| return [2]*int{x, nil} |
| } |
| |
| // does not leak c |
| func foo93(c chan *int) *int { // ERROR "foo93 c does not escape$" |
| for v := range c { |
| return v |
| } |
| return nil |
| } |
| |
| // does not leak m |
| func foo94(m map[*int]*int, b bool) *int { // ERROR "leaking param: m to result ~r2 level=1" |
| for k, v := range m { |
| if b { |
| return k |
| } |
| return v |
| } |
| return nil |
| } |
| |
| // does leak x |
| func foo95(m map[*int]*int, x *int) { // ERROR "foo95 m does not escape$" "leaking param: x$" |
| m[x] = x |
| } |
| |
| // does not leak m but does leak content |
| func foo96(m []*int) *int { // ERROR "leaking param: m to result ~r1 level=1" |
| return m[0] |
| } |
| |
| // does leak m |
| func foo97(m [1]*int) *int { // ERROR "leaking param: m to result ~r1 level=0$" |
| return m[0] |
| } |
| |
| // does not leak m |
| func foo98(m map[int]*int) *int { // ERROR "foo98 m does not escape$" |
| return m[0] |
| } |
| |
| // does leak m |
| func foo99(m *[1]*int) []*int { // ERROR "leaking param: m to result ~r1 level=0$" |
| return m[:] |
| } |
| |
| // does not leak m |
| func foo100(m []*int) *int { // ERROR "leaking param: m to result ~r1 level=1" |
| for _, v := range m { |
| return v |
| } |
| return nil |
| } |
| |
| // does leak m |
| func foo101(m [1]*int) *int { // ERROR "leaking param: m to result ~r1 level=0$" |
| for _, v := range m { |
| return v |
| } |
| return nil |
| } |
| |
| // does not leak m |
| func foo101a(m [1]*int) *int { // ERROR "foo101a m does not escape$" |
| for i := range m { // ERROR "moved to heap: i$" |
| return &i // ERROR "&i escapes to heap$" |
| } |
| return nil |
| } |
| |
| // does leak x |
| func foo102(m []*int, x *int) { // ERROR "foo102 m does not escape$" "leaking param: x$" |
| m[0] = x |
| } |
| |
| // does not leak x |
| func foo103(m [1]*int, x *int) { // ERROR "foo103 m does not escape$" "foo103 x does not escape$" |
| m[0] = x |
| } |
| |
| var y []*int |
| |
| // does not leak x but does leak content |
| func foo104(x []*int) { // ERROR "leaking param content: x" |
| copy(y, x) |
| } |
| |
| // does not leak x but does leak content |
| func foo105(x []*int) { // ERROR "leaking param content: x" |
| _ = append(y, x...) |
| } |
| |
| // does leak x |
| func foo106(x *int) { // ERROR "leaking param: x$" |
| _ = append(y, x) |
| } |
| |
| func foo107(x *int) map[*int]*int { // ERROR "leaking param: x$" |
| return map[*int]*int{x: nil} // ERROR "map\[\*int\]\*int literal escapes to heap$" |
| } |
| |
| func foo108(x *int) map[*int]*int { // ERROR "leaking param: x$" |
| return map[*int]*int{nil: x} // ERROR "map\[\*int\]\*int literal escapes to heap$" |
| } |
| |
| func foo109(x *int) *int { // ERROR "leaking param: x$" |
| m := map[*int]*int{x: nil} // ERROR "foo109 map\[\*int\]\*int literal does not escape$" |
| for k, _ := range m { |
| return k |
| } |
| return nil |
| } |
| |
| func foo110(x *int) *int { // ERROR "leaking param: x$" |
| m := map[*int]*int{nil: x} // ERROR "foo110 map\[\*int\]\*int literal does not escape$" |
| return m[nil] |
| } |
| |
| func foo111(x *int) *int { // ERROR "leaking param: x to result ~r1 level=0" |
| m := []*int{x} // ERROR "foo111 \[\]\*int literal does not escape$" |
| return m[0] |
| } |
| |
| func foo112(x *int) *int { // ERROR "leaking param: x to result ~r1 level=0$" |
| m := [1]*int{x} |
| return m[0] |
| } |
| |
| func foo113(x *int) *int { // ERROR "leaking param: x to result ~r1 level=0$" |
| m := Bar{ii: x} |
| return m.ii |
| } |
| |
| func foo114(x *int) *int { // ERROR "leaking param: x to result ~r1 level=0$" |
| m := &Bar{ii: x} // ERROR "foo114 &Bar literal does not escape$" |
| return m.ii |
| } |
| |
| func foo115(x *int) *int { // ERROR "leaking param: x to result ~r1 level=0$" |
| return (*int)(unsafe.Pointer(uintptr(unsafe.Pointer(x)) + 1)) |
| } |
| |
| func foo116(b bool) *int { |
| if b { |
| x := 1 // ERROR "moved to heap: x$" |
| return &x // ERROR "&x escapes to heap$" |
| } else { |
| y := 1 // ERROR "moved to heap: y$" |
| return &y // ERROR "&y escapes to heap$" |
| } |
| return nil |
| } |
| |
| func foo117(unknown func(interface{})) { // ERROR "foo117 unknown does not escape$" |
| x := 1 // ERROR "moved to heap: x$" |
| unknown(&x) // ERROR "&x escapes to heap$" |
| } |
| |
| func foo118(unknown func(*int)) { // ERROR "foo118 unknown does not escape$" |
| x := 1 // ERROR "moved to heap: x$" |
| unknown(&x) // ERROR "&x escapes to heap$" |
| } |
| |
| func external(*int) |
| |
| func foo119(x *int) { // ERROR "leaking param: x$" |
| external(x) |
| } |
| |
| func foo120() { |
| // formerly exponential time analysis |
| L1: |
| L2: |
| L3: |
| L4: |
| L5: |
| L6: |
| L7: |
| L8: |
| L9: |
| L10: |
| L11: |
| L12: |
| L13: |
| L14: |
| L15: |
| L16: |
| L17: |
| L18: |
| L19: |
| L20: |
| L21: |
| L22: |
| L23: |
| L24: |
| L25: |
| L26: |
| L27: |
| L28: |
| L29: |
| L30: |
| L31: |
| L32: |
| L33: |
| L34: |
| L35: |
| L36: |
| L37: |
| L38: |
| L39: |
| L40: |
| L41: |
| L42: |
| L43: |
| L44: |
| L45: |
| L46: |
| L47: |
| L48: |
| L49: |
| L50: |
| L51: |
| L52: |
| L53: |
| L54: |
| L55: |
| L56: |
| L57: |
| L58: |
| L59: |
| L60: |
| L61: |
| L62: |
| L63: |
| L64: |
| L65: |
| L66: |
| L67: |
| L68: |
| L69: |
| L70: |
| L71: |
| L72: |
| L73: |
| L74: |
| L75: |
| L76: |
| L77: |
| L78: |
| L79: |
| L80: |
| L81: |
| L82: |
| L83: |
| L84: |
| L85: |
| L86: |
| L87: |
| L88: |
| L89: |
| L90: |
| L91: |
| L92: |
| L93: |
| L94: |
| L95: |
| L96: |
| L97: |
| L98: |
| L99: |
| L100: |
| // use the labels to silence compiler errors |
| goto L1 |
| goto L2 |
| goto L3 |
| goto L4 |
| goto L5 |
| goto L6 |
| goto L7 |
| goto L8 |
| goto L9 |
| goto L10 |
| goto L11 |
| goto L12 |
| goto L13 |
| goto L14 |
| goto L15 |
| goto L16 |
| goto L17 |
| goto L18 |
| goto L19 |
| goto L20 |
| goto L21 |
| goto L22 |
| goto L23 |
| goto L24 |
| goto L25 |
| goto L26 |
| goto L27 |
| goto L28 |
| goto L29 |
| goto L30 |
| goto L31 |
| goto L32 |
| goto L33 |
| goto L34 |
| goto L35 |
| goto L36 |
| goto L37 |
| goto L38 |
| goto L39 |
| goto L40 |
| goto L41 |
| goto L42 |
| goto L43 |
| goto L44 |
| goto L45 |
| goto L46 |
| goto L47 |
| goto L48 |
| goto L49 |
| goto L50 |
| goto L51 |
| goto L52 |
| goto L53 |
| goto L54 |
| goto L55 |
| goto L56 |
| goto L57 |
| goto L58 |
| goto L59 |
| goto L60 |
| goto L61 |
| goto L62 |
| goto L63 |
| goto L64 |
| goto L65 |
| goto L66 |
| goto L67 |
| goto L68 |
| goto L69 |
| goto L70 |
| goto L71 |
| goto L72 |
| goto L73 |
| goto L74 |
| goto L75 |
| goto L76 |
| goto L77 |
| goto L78 |
| goto L79 |
| goto L80 |
| goto L81 |
| goto L82 |
| goto L83 |
| goto L84 |
| goto L85 |
| goto L86 |
| goto L87 |
| goto L88 |
| goto L89 |
| goto L90 |
| goto L91 |
| goto L92 |
| goto L93 |
| goto L94 |
| goto L95 |
| goto L96 |
| goto L97 |
| goto L98 |
| goto L99 |
| goto L100 |
| } |
| |
| func foo121() { |
| for i := 0; i < 10; i++ { |
| defer myprint(nil, i) // ERROR "... argument escapes to heap$" "i escapes to heap$" |
| go myprint(nil, i) // ERROR "... argument escapes to heap$" "i escapes to heap$" |
| } |
| } |
| |
| // same as foo121 but check across import |
| func foo121b() { |
| for i := 0; i < 10; i++ { |
| defer fmt.Printf("%d", i) // ERROR "... argument escapes to heap$" "i escapes to heap$" |
| go fmt.Printf("%d", i) // ERROR "... argument escapes to heap$" "i escapes to heap$" |
| } |
| } |
| |
| // a harmless forward jump |
| func foo122() { |
| var i *int |
| |
| goto L1 |
| L1: |
| i = new(int) // ERROR "foo122 new\(int\) does not escape$" |
| _ = i |
| } |
| |
| // a backward jump, increases loopdepth |
| func foo123() { |
| var i *int |
| |
| L1: |
| i = new(int) // ERROR "new\(int\) escapes to heap$" |
| |
| goto L1 |
| _ = i |
| } |
| |
| func foo124(x **int) { // ERROR "foo124 x does not escape$" |
| var i int // ERROR "moved to heap: i$" |
| p := &i // ERROR "&i escapes to heap$" |
| func() { // ERROR "foo124 func literal does not escape$" |
| *x = p // ERROR "leaking closure reference p$" |
| }() |
| } |
| |
| func foo125(ch chan *int) { // ERROR "foo125 ch does not escape$" |
| var i int // ERROR "moved to heap: i$" |
| p := &i // ERROR "&i escapes to heap$" |
| func() { // ERROR "foo125 func literal does not escape$" |
| ch <- p // ERROR "leaking closure reference p$" |
| }() |
| } |
| |
| func foo126() { |
| var px *int // loopdepth 0 |
| for { |
| // loopdepth 1 |
| var i int // ERROR "moved to heap: i$" |
| func() { // ERROR "foo126 func literal does not escape$" |
| px = &i // ERROR "&i escapes to heap$" "leaking closure reference i" |
| }() |
| } |
| _ = px |
| } |
| |
| var px *int |
| |
| func foo127() { |
| var i int // ERROR "moved to heap: i$" |
| p := &i // ERROR "&i escapes to heap$" |
| q := p |
| px = q |
| } |
| |
| func foo128() { |
| var i int |
| p := &i // ERROR "foo128 &i does not escape$" |
| q := p |
| _ = q |
| } |
| |
| func foo129() { |
| var i int // ERROR "moved to heap: i$" |
| p := &i // ERROR "&i escapes to heap$" |
| func() { // ERROR "foo129 func literal does not escape$" |
| q := p // ERROR "leaking closure reference p$" |
| func() { // ERROR "foo129.func1 func literal does not escape$" |
| r := q // ERROR "leaking closure reference q$" |
| px = r |
| }() |
| }() |
| } |
| |
| func foo130() { |
| for { |
| var i int // ERROR "moved to heap: i$" |
| func() { // ERROR "foo130 func literal does not escape$" |
| px = &i // ERROR "&i escapes to heap$" "leaking closure reference i$" |
| }() |
| } |
| } |
| |
| func foo131() { |
| var i int // ERROR "moved to heap: i$" |
| func() { // ERROR "foo131 func literal does not escape$" |
| px = &i // ERROR "&i escapes to heap$" "leaking closure reference i$" |
| }() |
| } |
| |
| func foo132() { |
| var i int // ERROR "moved to heap: i$" |
| go func() { // ERROR "func literal escapes to heap$" |
| px = &i // ERROR "&i escapes to heap$" "leaking closure reference i$" |
| }() |
| } |
| |
| func foo133() { |
| var i int // ERROR "moved to heap: i$" |
| defer func() { // ERROR "foo133 func literal does not escape$" |
| px = &i // ERROR "&i escapes to heap$" "leaking closure reference i$" |
| }() |
| } |
| |
| func foo134() { |
| var i int |
| p := &i // ERROR "foo134 &i does not escape$" |
| func() { // ERROR "foo134 func literal does not escape$" |
| q := p |
| func() { // ERROR "foo134.func1 func literal does not escape$" |
| r := q |
| _ = r |
| }() |
| }() |
| } |
| |
| func foo135() { |
| var i int // ERROR "moved to heap: i$" |
| p := &i // ERROR "&i escapes to heap$" |
| go func() { // ERROR "func literal escapes to heap$" |
| q := p |
| func() { // ERROR "foo135.func1 func literal does not escape$" |
| r := q |
| _ = r |
| }() |
| }() |
| } |
| |
| func foo136() { |
| var i int // ERROR "moved to heap: i$" |
| p := &i // ERROR "&i escapes to heap$" |
| go func() { // ERROR "func literal escapes to heap$" |
| q := p // ERROR "leaking closure reference p$" |
| func() { // ERROR "foo136.func1 func literal does not escape$" |
| r := q // ERROR "leaking closure reference q$" |
| px = r |
| }() |
| }() |
| } |
| |
| func foo137() { |
| var i int // ERROR "moved to heap: i$" |
| p := &i // ERROR "&i escapes to heap$" |
| func() { // ERROR "foo137 func literal does not escape$" |
| q := p // ERROR "leaking closure reference p$" |
| go func() { // ERROR "func literal escapes to heap$" |
| r := q |
| _ = r |
| }() |
| }() |
| } |
| |
| func foo138() *byte { |
| type T struct { |
| x [1]byte |
| } |
| t := new(T) // ERROR "new\(T\) escapes to heap$" |
| return &t.x[0] // ERROR "&t.x\[0\] escapes to heap$" |
| } |
| |
| func foo139() *byte { |
| type T struct { |
| x struct { |
| y byte |
| } |
| } |
| t := new(T) // ERROR "new\(T\) escapes to heap$" |
| return &t.x.y // ERROR "&t.x.y escapes to heap$" |
| } |
| |
| // issue 4751 |
| func foo140() interface{} { |
| type T struct { |
| X string |
| } |
| type U struct { |
| X string |
| T *T |
| } |
| t := &T{} // ERROR "&T literal escapes to heap$" |
| return U{ // ERROR "U literal escapes to heap$" |
| X: t.X, |
| T: t, |
| } |
| } |
| |
| //go:noescape |
| |
| func F1([]byte) |
| |
| func F2([]byte) |
| |
| //go:noescape |
| |
| func F3(x []byte) // ERROR "F3 x does not escape$" |
| |
| func F4(x []byte) |
| |
| func G() { |
| var buf1 [10]byte |
| F1(buf1[:]) // ERROR "G buf1 does not escape$" |
| |
| var buf2 [10]byte // ERROR "moved to heap: buf2$" |
| F2(buf2[:]) // ERROR "buf2 escapes to heap$" |
| |
| var buf3 [10]byte |
| F3(buf3[:]) // ERROR "G buf3 does not escape$" |
| |
| var buf4 [10]byte // ERROR "moved to heap: buf4$" |
| F4(buf4[:]) // ERROR "buf4 escapes to heap$" |
| } |
| |
| type Tm struct { |
| x int |
| } |
| |
| func (t *Tm) M() { // ERROR "\(\*Tm\).M t does not escape$" |
| } |
| |
| func foo141() { |
| var f func() |
| |
| t := new(Tm) // ERROR "new\(Tm\) escapes to heap$" |
| f = t.M // ERROR "foo141 t.M does not escape$" |
| _ = f |
| } |
| |
| var gf func() |
| |
| func foo142() { |
| t := new(Tm) // ERROR "new\(Tm\) escapes to heap$" |
| gf = t.M // ERROR "t.M escapes to heap$" |
| } |
| |
| // issue 3888. |
| func foo143() { |
| for i := 0; i < 1000; i++ { |
| func() { // ERROR "foo143 func literal does not escape$" |
| for i := 0; i < 1; i++ { |
| var t Tm |
| t.M() // ERROR "foo143.func1 t does not escape$" |
| } |
| }() |
| } |
| } |
| |
| // issue 5773 |
| // Check that annotations take effect regardless of whether they |
| // are before or after the use in the source code. |
| |
| //go:noescape |
| |
| func foo144a(*int) |
| |
| func foo144() { |
| var x int |
| foo144a(&x) // ERROR "foo144 &x does not escape$" |
| var y int |
| foo144b(&y) // ERROR "foo144 &y does not escape$" |
| } |
| |
| //go:noescape |
| |
| func foo144b(*int) |
| |
| // issue 7313: for loop init should not be treated as "in loop" |
| |
| type List struct { |
| Next *List |
| } |
| |
| func foo145(l List) { // ERROR "foo145 l does not escape$" |
| var p *List |
| for p = &l; p.Next != nil; p = p.Next { // ERROR "foo145 &l does not escape$" |
| } |
| } |
| |
| func foo146(l List) { // ERROR "foo146 l does not escape$" |
| var p *List |
| p = &l // ERROR "foo146 &l does not escape$" |
| for ; p.Next != nil; p = p.Next { |
| } |
| } |
| |
| func foo147(l List) { // ERROR "foo147 l does not escape$" |
| var p *List |
| p = &l // ERROR "foo147 &l does not escape$" |
| for p.Next != nil { |
| p = p.Next |
| } |
| } |
| |
| func foo148(l List) { // ERROR "foo148 l does not escape$" |
| for p := &l; p.Next != nil; p = p.Next { // ERROR "foo148 &l does not escape$" |
| } |
| } |
| |
| // related: address of variable should have depth of variable, not of loop |
| |
| func foo149(l List) { // ERROR "foo149 l does not escape$" |
| var p *List |
| for { |
| for p = &l; p.Next != nil; p = p.Next { // ERROR "foo149 &l does not escape$" |
| } |
| } |
| } |
| |
| // issue 7934: missed ... if element type had no pointers |
| |
| var save150 []byte |
| |
| func foo150(x ...byte) { // ERROR "leaking param: x$" |
| save150 = x |
| } |
| |
| func bar150() { |
| foo150(1, 2, 3) // ERROR "... argument escapes to heap$" |
| } |
| |
| // issue 7931: bad handling of slice of array |
| |
| var save151 *int |
| |
| func foo151(x *int) { // ERROR "leaking param: x$" |
| save151 = x |
| } |
| |
| func bar151() { |
| var a [64]int // ERROR "moved to heap: a$" |
| a[4] = 101 |
| foo151(&(&a)[4:8][0]) // ERROR "&\(&a\)\[4:8\]\[0\] escapes to heap$" "&a escapes to heap$" |
| } |
| |
| func bar151b() { |
| var a [10]int // ERROR "moved to heap: a$" |
| b := a[:] // ERROR "a escapes to heap$" |
| foo151(&b[4:8][0]) // ERROR "&b\[4:8\]\[0\] escapes to heap$" |
| } |
| |
| func bar151c() { |
| var a [64]int // ERROR "moved to heap: a$" |
| a[4] = 101 |
| foo151(&(&a)[4:8:8][0]) // ERROR "&\(&a\)\[4:8:8\]\[0\] escapes to heap$" "&a escapes to heap$" |
| } |
| |
| func bar151d() { |
| var a [10]int // ERROR "moved to heap: a$" |
| b := a[:] // ERROR "a escapes to heap$" |
| foo151(&b[4:8:8][0]) // ERROR "&b\[4:8:8\]\[0\] escapes to heap$" |
| } |
| |
| // issue 8120 |
| |
| type U struct { |
| s *string |
| } |
| |
| func (u *U) String() *string { // ERROR "leaking param: u to result ~r0 level=1$" |
| return u.s |
| } |
| |
| type V struct { |
| s *string |
| } |
| |
| // BAD -- level of leak ought to be 0 |
| func NewV(u U) *V { // ERROR "leaking param: u to result ~r1 level=-1" |
| return &V{u.String()} // ERROR "&V literal escapes to heap$" "NewV u does not escape" |
| } |
| |
| func foo152() { |
| a := "a" // ERROR "moved to heap: a$" |
| u := U{&a} // ERROR "&a escapes to heap$" |
| v := NewV(u) |
| println(v) |
| } |
| |
| // issue 8176 - &x in type switch body not marked as escaping |
| |
| func foo153(v interface{}) *int { // ERROR "leaking param: v to result ~r1 level=-1$" |
| switch x := v.(type) { |
| case int: // ERROR "moved to heap: x$" |
| return &x // ERROR "&x escapes to heap$" |
| } |
| panic(0) |
| } |
| |
| // issue 8185 - &result escaping into result |
| |
| func f() (x int, y *int) { // ERROR "moved to heap: x$" |
| y = &x // ERROR "&x escapes to heap$" |
| return |
| } |
| |
| func g() (x interface{}) { // ERROR "moved to heap: x$" |
| x = &x // ERROR "&x escapes to heap$" |
| return |
| } |
| |
| var sink interface{} |
| |
| type Lit struct { |
| p *int |
| } |
| |
| func ptrlitNoescape() { |
| // Both literal and element do not escape. |
| i := 0 |
| x := &Lit{&i} // ERROR "ptrlitNoescape &Lit literal does not escape$" "ptrlitNoescape &i does not escape$" |
| _ = x |
| } |
| |
| func ptrlitNoEscape2() { |
| // Literal does not escape, but element does. |
| i := 0 // ERROR "moved to heap: i$" |
| x := &Lit{&i} // ERROR "&i escapes to heap$" "ptrlitNoEscape2 &Lit literal does not escape$" |
| sink = *x // ERROR "\*x escapes to heap$" |
| } |
| |
| func ptrlitEscape() { |
| // Both literal and element escape. |
| i := 0 // ERROR "moved to heap: i$" |
| x := &Lit{&i} // ERROR "&Lit literal escapes to heap$" "&i escapes to heap$" |
| sink = x // ERROR "x escapes to heap$" |
| } |
| |
| // self-assignments |
| |
| type Buffer struct { |
| arr [64]byte |
| arrPtr *[64]byte |
| buf1 []byte |
| buf2 []byte |
| str1 string |
| str2 string |
| } |
| |
| func (b *Buffer) foo() { // ERROR "\(\*Buffer\).foo b does not escape$" |
| b.buf1 = b.buf1[1:2] // ERROR "\(\*Buffer\).foo ignoring self-assignment in b.buf1 = b.buf1\[1:2\]$" |
| b.buf1 = b.buf1[1:2:3] // ERROR "\(\*Buffer\).foo ignoring self-assignment in b.buf1 = b.buf1\[1:2:3\]$" |
| b.buf1 = b.buf2[1:2] // ERROR "\(\*Buffer\).foo ignoring self-assignment in b.buf1 = b.buf2\[1:2\]$" |
| b.buf1 = b.buf2[1:2:3] // ERROR "\(\*Buffer\).foo ignoring self-assignment in b.buf1 = b.buf2\[1:2:3\]$" |
| } |
| |
| func (b *Buffer) bar() { // ERROR "leaking param: b$" |
| b.buf1 = b.arr[1:2] // ERROR "b.arr escapes to heap$" |
| } |
| |
| func (b *Buffer) arrayPtr() { // ERROR "\(\*Buffer\).arrayPtr b does not escape" |
| b.buf1 = b.arrPtr[1:2] // ERROR "\(\*Buffer\).arrayPtr ignoring self-assignment in b.buf1 = b.arrPtr\[1:2\]$" |
| b.buf1 = b.arrPtr[1:2:3] // ERROR "\(\*Buffer\).arrayPtr ignoring self-assignment in b.buf1 = b.arrPtr\[1:2:3\]$" |
| } |
| |
| func (b *Buffer) baz() { // ERROR "\(\*Buffer\).baz b does not escape$" |
| b.str1 = b.str1[1:2] // ERROR "\(\*Buffer\).baz ignoring self-assignment in b.str1 = b.str1\[1:2\]$" |
| b.str1 = b.str2[1:2] // ERROR "\(\*Buffer\).baz ignoring self-assignment in b.str1 = b.str2\[1:2\]$" |
| } |
| |
| func (b *Buffer) bat() { // ERROR "leaking param content: b$" |
| o := new(Buffer) // ERROR "new\(Buffer\) escapes to heap$" |
| o.buf1 = b.buf1[1:2] |
| sink = o // ERROR "o escapes to heap$" |
| } |
| |
| func quux(sp *string, bp *[]byte) { // ERROR "quux bp does not escape$" "quux sp does not escape$" |
| *sp = (*sp)[1:2] // ERROR "quux ignoring self-assignment in \*sp = \(\*sp\)\[1:2\]$" |
| *bp = (*bp)[1:2] // ERROR "quux ignoring self-assignment in \*bp = \(\*bp\)\[1:2\]$" |
| } |
| |
| type StructWithString struct { |
| p *int |
| s string |
| } |
| |
| // This is escape analysis false negative. |
| // We assign the pointer to x.p but leak x.s. Escape analysis coarsens flows |
| // to just x, and thus &i looks escaping. |
| func fieldFlowTracking() { |
| var x StructWithString |
| i := 0 // ERROR "moved to heap: i$" |
| x.p = &i // ERROR "&i escapes to heap$" |
| sink = x.s // ERROR "x.s escapes to heap$" |
| } |
| |
| // String operations. |
| |
| func slicebytetostring0() { |
| b := make([]byte, 20) // ERROR "slicebytetostring0 make\(\[\]byte, 20\) does not escape$" |
| s := string(b) // ERROR "slicebytetostring0 string\(b\) does not escape$" |
| _ = s |
| } |
| |
| func slicebytetostring1() { |
| b := make([]byte, 20) // ERROR "slicebytetostring1 make\(\[\]byte, 20\) does not escape$" |
| s := string(b) // ERROR "slicebytetostring1 string\(b\) does not escape$" |
| s1 := s[0:1] |
| _ = s1 |
| } |
| |
| func slicebytetostring2() { |
| b := make([]byte, 20) // ERROR "slicebytetostring2 make\(\[\]byte, 20\) does not escape$" |
| s := string(b) // ERROR "string\(b\) escapes to heap$" |
| s1 := s[0:1] // ERROR "moved to heap: s1$" |
| sink = &s1 // ERROR "&s1 escapes to heap$" |
| } |
| |
| func slicebytetostring3() { |
| b := make([]byte, 20) // ERROR "slicebytetostring3 make\(\[\]byte, 20\) does not escape$" |
| s := string(b) // ERROR "string\(b\) escapes to heap$" |
| s1 := s[0:1] |
| sink = s1 // ERROR "s1 escapes to heap$" |
| } |
| |
| func addstr0() { |
| s0 := "a" |
| s1 := "b" |
| s := s0 + s1 // ERROR "addstr0 s0 \+ s1 does not escape$" |
| _ = s |
| } |
| |
| func addstr1() { |
| s0 := "a" |
| s1 := "b" |
| s := "c" |
| s += s0 + s1 // ERROR "addstr1 s0 \+ s1 does not escape$" |
| _ = s |
| } |
| |
| func addstr2() { |
| b := make([]byte, 20) // ERROR "addstr2 make\(\[\]byte, 20\) does not escape$" |
| s0 := "a" |
| s := string(b) + s0 // ERROR "addstr2 string\(b\) \+ s0 does not escape$" "addstr2 string\(b\) does not escape$" |
| _ = s |
| } |
| |
| func addstr3() { |
| s0 := "a" |
| s1 := "b" |
| s := s0 + s1 // ERROR "s0 \+ s1 escapes to heap$" |
| s2 := s[0:1] |
| sink = s2 // ERROR "s2 escapes to heap$" |
| } |
| |
| func intstring0() bool { |
| // string does not escape |
| x := '0' |
| s := string(x) // ERROR "intstring0 string\(x\) does not escape$" |
| return s == "0" |
| } |
| |
| func intstring1() string { |
| // string does not escape, but the buffer does |
| x := '0' |
| s := string(x) // ERROR "string\(x\) escapes to heap$" |
| return s |
| } |
| |
| func intstring2() { |
| // string escapes to heap |
| x := '0' |
| s := string(x) // ERROR "moved to heap: s$" "string\(x\) escapes to heap$" |
| sink = &s // ERROR "&s escapes to heap$" |
| } |
| |
| func stringtoslicebyte0() { |
| s := "foo" |
| x := []byte(s) // ERROR "stringtoslicebyte0 \(\[\]byte\)\(s\) does not escape$" |
| _ = x |
| } |
| |
| func stringtoslicebyte1() []byte { |
| s := "foo" |
| return []byte(s) // ERROR "\(\[\]byte\)\(s\) escapes to heap$" |
| } |
| |
| func stringtoslicebyte2() { |
| s := "foo" |
| sink = []byte(s) // ERROR "\(\[\]byte\)\(s\) escapes to heap$" |
| } |
| |
| func stringtoslicerune0() { |
| s := "foo" |
| x := []rune(s) // ERROR "stringtoslicerune0 \(\[\]rune\)\(s\) does not escape$" |
| _ = x |
| } |
| |
| func stringtoslicerune1() []rune { |
| s := "foo" |
| return []rune(s) // ERROR "\(\[\]rune\)\(s\) escapes to heap$" |
| } |
| |
| func stringtoslicerune2() { |
| s := "foo" |
| sink = []rune(s) // ERROR "\(\[\]rune\)\(s\) escapes to heap$" |
| } |
| |
| func slicerunetostring0() { |
| r := []rune{1, 2, 3} // ERROR "slicerunetostring0 \[\]rune literal does not escape$" |
| s := string(r) // ERROR "slicerunetostring0 string\(r\) does not escape$" |
| _ = s |
| } |
| |
| func slicerunetostring1() string { |
| r := []rune{1, 2, 3} // ERROR "slicerunetostring1 \[\]rune literal does not escape$" |
| return string(r) // ERROR "string\(r\) escapes to heap$" |
| } |
| |
| func slicerunetostring2() { |
| r := []rune{1, 2, 3} // ERROR "slicerunetostring2 \[\]rune literal does not escape$" |
| sink = string(r) // ERROR "string\(r\) escapes to heap$" |
| } |
| |
| func makemap0() { |
| m := make(map[int]int) // ERROR "makemap0 make\(map\[int\]int\) does not escape$" |
| m[0] = 0 |
| m[1]++ |
| delete(m, 1) |
| sink = m[0] // ERROR "m\[0\] escapes to heap$" |
| } |
| |
| func makemap1() map[int]int { |
| return make(map[int]int) // ERROR "make\(map\[int\]int\) escapes to heap$" |
| } |
| |
| func makemap2() { |
| m := make(map[int]int) // ERROR "make\(map\[int\]int\) escapes to heap$" |
| sink = m // ERROR "m escapes to heap$" |
| } |
| |
| func nonescapingEface(m map[interface{}]bool) bool { // ERROR "nonescapingEface m does not escape$" |
| return m["foo"] // ERROR "nonescapingEface .foo. does not escape$" |
| } |
| |
| func nonescapingIface(m map[M]bool) bool { // ERROR "nonescapingIface m does not escape$" |
| return m[MV(0)] // ERROR "nonescapingIface MV\(0\) does not escape$" |
| } |
| |
| func issue10353() { |
| x := new(int) // ERROR "new\(int\) escapes to heap$" |
| issue10353a(x)() |
| } |
| |
| func issue10353a(x *int) func() { // ERROR "leaking param: x to result ~r1 level=-1$" |
| return func() { // ERROR "func literal escapes to heap$" |
| println(*x) |
| } |
| } |
| |
| func issue10353b() { |
| var f func() |
| for { |
| x := new(int) // ERROR "new\(int\) escapes to heap$" |
| f = func() { // ERROR "func literal escapes to heap$" |
| println(*x) |
| } |
| } |
| _ = f |
| } |
| |
| func issue11387(x int) func() int { |
| f := func() int { return x } // ERROR "func literal escapes to heap" |
| slice1 := []func() int{f} // ERROR "\[\].* does not escape" |
| slice2 := make([]func() int, 1) // ERROR "make\(.*\) does not escape" |
| copy(slice2, slice1) |
| return slice2[0] |
| } |
| |
| func issue12397(x, y int) { // ERROR "moved to heap: y$" |
| // x does not escape below, because all relevant code is dead. |
| if false { |
| gxx = &x |
| } else { |
| gxx = &y // ERROR "&y escapes to heap$" |
| } |
| |
| if true { |
| gxx = &y // ERROR "&y escapes to heap$" |
| } else { |
| gxx = &x |
| } |
| } |