blob: 10d853435901548c0c7e1fa57c48faebc9ad01f5 [file] [log] [blame]
// Copyright 2015 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// System calls and other sys.stuff for ARM64, Darwin
// System calls are implemented in libSystem, this file contains
// trampolines that convert from Go to C calling convention.
#include "go_asm.h"
#include "go_tls.h"
#include "textflag.h"
TEXT notok<>(SB),NOSPLIT,$0
MOVD $0, R8
MOVD R8, (R8)
B 0(PC)
TEXT runtime·open_trampoline(SB),NOSPLIT,$0
SUB $16, RSP
MOVW 8(R0), R1 // arg 2 flags
MOVW 12(R0), R2 // arg 3 mode
MOVW R2, (RSP) // arg 3 is variadic, pass on stack
MOVD 0(R0), R0 // arg 1 pathname
BL libc_open(SB)
ADD $16, RSP
RET
TEXT runtime·close_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 fd
BL libc_close(SB)
RET
TEXT runtime·write_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 buf
MOVW 16(R0), R2 // arg 3 count
MOVW 0(R0), R0 // arg 1 fd
BL libc_write(SB)
RET
TEXT runtime·read_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 buf
MOVW 16(R0), R2 // arg 3 count
MOVW 0(R0), R0 // arg 1 fd
BL libc_read(SB)
RET
TEXT runtime·exit_trampoline(SB),NOSPLIT|NOFRAME,$0
MOVW 0(R0), R0
BL libc_exit(SB)
MOVD $1234, R0
MOVD $1002, R1
MOVD R0, (R1) // fail hard
TEXT runtime·raiseproc_trampoline(SB),NOSPLIT,$0
MOVD 0(R0), R19 // signal
BL libc_getpid(SB)
// arg 1 pid already in R0 from getpid
MOVD R19, R1 // arg 2 signal
BL libc_kill(SB)
RET
TEXT runtime·mmap_trampoline(SB),NOSPLIT,$0
MOVD R0, R19
MOVD 0(R19), R0 // arg 1 addr
MOVD 8(R19), R1 // arg 2 len
MOVW 16(R19), R2 // arg 3 prot
MOVW 20(R19), R3 // arg 4 flags
MOVW 24(R19), R4 // arg 5 fd
MOVW 28(R19), R5 // arg 6 off
BL libc_mmap(SB)
MOVD $0, R1
MOVD $-1, R2
CMP R0, R2
BNE ok
BL libc_error(SB)
MOVW (R0), R1
MOVD $0, R0
ok:
MOVD R0, 32(R19) // ret 1 p
MOVD R1, 40(R19) // ret 2 err
RET
TEXT runtime·munmap_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 len
MOVD 0(R0), R0 // arg 1 addr
BL libc_munmap(SB)
CMP $0, R0
BEQ 2(PC)
BL notok<>(SB)
RET
TEXT runtime·madvise_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 len
MOVW 16(R0), R2 // arg 3 advice
MOVD 0(R0), R0 // arg 1 addr
BL libc_madvise(SB)
RET
TEXT runtime·setitimer_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 new
MOVD 16(R0), R2 // arg 3 old
MOVW 0(R0), R0 // arg 1 which
BL libc_setitimer(SB)
RET
TEXT runtime·walltime_trampoline(SB),NOSPLIT,$0
// R0 already has *timeval
MOVD $0, R1 // no timezone needed
BL libc_gettimeofday(SB)
RET
GLOBL timebase<>(SB),NOPTR,$(machTimebaseInfo__size)
TEXT runtime·nanotime_trampoline(SB),NOSPLIT,$40
MOVD R0, R19
BL libc_mach_absolute_time(SB)
MOVD R0, 0(R19)
MOVW timebase<>+machTimebaseInfo_numer(SB), R20
MOVD $timebase<>+machTimebaseInfo_denom(SB), R21
LDARW (R21), R21 // atomic read
CMP $0, R21
BNE initialized
SUB $(machTimebaseInfo__size+15)/16*16, RSP
MOVD RSP, R0
BL libc_mach_timebase_info(SB)
MOVW machTimebaseInfo_numer(RSP), R20
MOVW machTimebaseInfo_denom(RSP), R21
ADD $(machTimebaseInfo__size+15)/16*16, RSP
MOVW R20, timebase<>+machTimebaseInfo_numer(SB)
MOVD $timebase<>+machTimebaseInfo_denom(SB), R22
STLRW R21, (R22) // atomic write
initialized:
MOVW R20, 8(R19)
MOVW R21, 12(R19)
RET
TEXT runtime·sigfwd(SB),NOSPLIT,$0-32
MOVW sig+8(FP), R0
MOVD info+16(FP), R1
MOVD ctx+24(FP), R2
MOVD fn+0(FP), R11
BL (R11)
RET
TEXT runtime·sigtramp(SB),NOSPLIT,$0
// Reserve space for callee-save registers and arguments.
SUB $(8*16), RSP
// Save callee-save registers.
MOVD R19, (8*4)(RSP)
MOVD R20, (8*5)(RSP)
MOVD R21, (8*6)(RSP)
MOVD R22, (8*7)(RSP)
MOVD R23, (8*8)(RSP)
MOVD R24, (8*9)(RSP)
MOVD R25, (8*10)(RSP)
MOVD R26, (8*11)(RSP)
MOVD R27, (8*12)(RSP)
MOVD g, (8*13)(RSP)
MOVD R29, (8*14)(RSP)
// Save arguments.
MOVW R0, (8*1)(RSP) // sig
MOVD R1, (8*2)(RSP) // info
MOVD R2, (8*3)(RSP) // ctx
// this might be called in external code context,
// where g is not set.
MOVB runtime·iscgo(SB), R0
CMP $0, R0
BEQ 2(PC)
BL runtime·load_g(SB)
MOVD RSP, R6
CMP $0, g
BEQ nog
// iOS always use the main stack to run the signal handler.
// We need to switch to gsignal ourselves.
MOVD g_m(g), R11
MOVD m_gsignal(R11), R5
MOVD (g_stack+stack_hi)(R5), R6
nog:
// Restore arguments.
MOVW (8*1)(RSP), R0
MOVD (8*2)(RSP), R1
MOVD (8*3)(RSP), R2
// Reserve space for args and the stack pointer on the
// gsignal stack.
SUB $48, R6
// Save stack pointer.
MOVD RSP, R4
MOVD R4, (8*4)(R6)
// Switch to gsignal stack.
MOVD R6, RSP
// Call sigtrampgo.
MOVW R0, (8*1)(RSP)
MOVD R1, (8*2)(RSP)
MOVD R2, (8*3)(RSP)
MOVD $runtime·sigtrampgo(SB), R11
BL (R11)
// Switch to old stack.
MOVD (8*4)(RSP), R5
MOVD R5, RSP
// Restore callee-save registers.
MOVD (8*4)(RSP), R19
MOVD (8*5)(RSP), R20
MOVD (8*6)(RSP), R21
MOVD (8*7)(RSP), R22
MOVD (8*8)(RSP), R23
MOVD (8*9)(RSP), R24
MOVD (8*10)(RSP), R25
MOVD (8*11)(RSP), R26
MOVD (8*12)(RSP), R27
MOVD (8*13)(RSP), g
MOVD (8*14)(RSP), R29
ADD $(8*16), RSP
RET
TEXT runtime·cgoSigtramp(SB),NOSPLIT,$0
JMP runtime·sigtramp(SB)
TEXT runtime·sigprocmask_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 new
MOVD 16(R0), R2 // arg 3 old
MOVW 0(R0), R0 // arg 1 how
BL libc_pthread_sigmask(SB)
CMP $0, R0
BEQ 2(PC)
BL notok<>(SB)
RET
TEXT runtime·sigaction_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 new
MOVD 16(R0), R2 // arg 3 old
MOVW 0(R0), R0 // arg 1 how
BL libc_sigaction(SB)
CMP $0, R0
BEQ 2(PC)
BL notok<>(SB)
RET
TEXT runtime·usleep_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 usec
BL libc_usleep(SB)
RET
TEXT runtime·sysctl_trampoline(SB),NOSPLIT,$0
MOVW 8(R0), R1 // arg 2 miblen
MOVD 16(R0), R2 // arg 3 out
MOVD 24(R0), R3 // arg 4 size
MOVD 32(R0), R4 // arg 5 dst
MOVD 40(R0), R5 // arg 6 ndst
MOVD 0(R0), R0 // arg 1 mib
BL libc_sysctl(SB)
RET
TEXT runtime·kqueue_trampoline(SB),NOSPLIT,$0
BL libc_kqueue(SB)
RET
TEXT runtime·kevent_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 keventt
MOVW 16(R0), R2 // arg 3 nch
MOVD 24(R0), R3 // arg 4 ev
MOVW 32(R0), R4 // arg 5 nev
MOVD 40(R0), R5 // arg 6 ts
MOVW 0(R0), R0 // arg 1 kq
BL libc_kevent(SB)
MOVD $-1, R2
CMP R0, R2
BNE ok
BL libc_error(SB)
MOVW (R0), R0 // errno
NEG R0, R0 // caller wants it as a negative error code
ok:
RET
TEXT runtime·fcntl_trampoline(SB),NOSPLIT,$0
SUB $16, RSP
MOVW 4(R0), R1 // arg 2 cmd
MOVW 8(R0), R2 // arg 3 arg
MOVW R2, (RSP) // arg 3 is variadic, pass on stack
MOVW 0(R0), R0 // arg 1 fd
BL libc_fcntl(SB)
ADD $16, RSP
RET
// sigaltstack on iOS is not supported and will always
// run the signal handler on the main stack, so our sigtramp has
// to do the stack switch ourselves.
TEXT runtime·sigaltstack_trampoline(SB),NOSPLIT,$0
MOVW $43, R0
BL libc_exit(SB)
RET
// Thread related functions
// Note: On darwin/arm64, the runtime always use runtime/cgo to
// create threads, so all thread related functions will just exit with a
// unique status.
TEXT runtime·mstart_stub(SB),NOSPLIT,$0
MOVW $44, R0
BL libc_exit(SB)
RET
TEXT runtime·pthread_attr_init_trampoline(SB),NOSPLIT,$0
MOVW $45, R0
BL libc_exit(SB)
RET
TEXT runtime·pthread_attr_setstacksize_trampoline(SB),NOSPLIT,$0
MOVW $46, R0
BL libc_exit(SB)
RET
TEXT runtime·pthread_attr_setdetachstate_trampoline(SB),NOSPLIT,$0
MOVW $47, R0
BL libc_exit(SB)
RET
TEXT runtime·pthread_create_trampoline(SB),NOSPLIT,$0
MOVW $48, R0
BL libc_exit(SB)
RET
TEXT runtime·raise_trampoline(SB),NOSPLIT,$0
MOVW 0(R0), R0 // arg 1 sig
BL libc_raise(SB)
RET
TEXT runtime·pthread_mutex_init_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 attr
MOVD 0(R0), R0 // arg 1 mutex
BL libc_pthread_mutex_init(SB)
RET
TEXT runtime·pthread_mutex_lock_trampoline(SB),NOSPLIT,$0
MOVD 0(R0), R0 // arg 1 mutex
BL libc_pthread_mutex_lock(SB)
RET
TEXT runtime·pthread_mutex_unlock_trampoline(SB),NOSPLIT,$0
MOVD 0(R0), R0 // arg 1 mutex
BL libc_pthread_mutex_unlock(SB)
RET
TEXT runtime·pthread_cond_init_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 attr
MOVD 0(R0), R0 // arg 1 cond
BL libc_pthread_cond_init(SB)
RET
TEXT runtime·pthread_cond_wait_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 mutex
MOVD 0(R0), R0 // arg 1 cond
BL libc_pthread_cond_wait(SB)
RET
TEXT runtime·pthread_cond_timedwait_relative_np_trampoline(SB),NOSPLIT,$0
MOVD 8(R0), R1 // arg 2 mutex
MOVD 16(R0), R2 // arg 3 timeout
MOVD 0(R0), R0 // arg 1 cond
BL libc_pthread_cond_timedwait_relative_np(SB)
RET
TEXT runtime·pthread_cond_signal_trampoline(SB),NOSPLIT,$0
MOVD 0(R0), R0 // arg 1 cond
BL libc_pthread_cond_signal(SB)
RET
// syscall calls a function in libc on behalf of the syscall package.
// syscall takes a pointer to a struct like:
// struct {
// fn uintptr
// a1 uintptr
// a2 uintptr
// a3 uintptr
// r1 uintptr
// r2 uintptr
// err uintptr
// }
// syscall must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscall(SB),NOSPLIT,$0
SUB $16, RSP // push structure pointer
MOVD R0, 8(RSP)
MOVD 0(R0), R12 // fn
MOVD 16(R0), R1 // a2
MOVD 24(R0), R2 // a3
MOVD 8(R0), R0 // a1
// If fn is declared as vararg, we have to pass the vararg arguments on the stack.
// (Because ios decided not to adhere to the standard arm64 calling convention, sigh...)
// The only libSystem calls we support that are vararg are open, fcntl, and ioctl,
// which are all of the form fn(x, y, ...). So we just need to put the 3rd arg
// on the stack as well.
// If we ever have other vararg libSystem calls, we might need to handle more cases.
MOVD R2, (RSP)
BL (R12)
MOVD 8(RSP), R2 // pop structure pointer
ADD $16, RSP
MOVD R0, 32(R2) // save r1
MOVD R1, 40(R2) // save r2
CMPW $-1, R0
BNE ok
SUB $16, RSP // push structure pointer
MOVD R2, 8(RSP)
BL libc_error(SB)
MOVW (R0), R0
MOVD 8(RSP), R2 // pop structure pointer
ADD $16, RSP
MOVD R0, 48(R2) // save err
ok:
RET
// syscallX calls a function in libc on behalf of the syscall package.
// syscallX takes a pointer to a struct like:
// struct {
// fn uintptr
// a1 uintptr
// a2 uintptr
// a3 uintptr
// r1 uintptr
// r2 uintptr
// err uintptr
// }
// syscallX must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscallX(SB),NOSPLIT,$0
SUB $16, RSP // push structure pointer
MOVD R0, (RSP)
MOVD 0(R0), R12 // fn
MOVD 16(R0), R1 // a2
MOVD 24(R0), R2 // a3
MOVD 8(R0), R0 // a1
BL (R12)
MOVD (RSP), R2 // pop structure pointer
ADD $16, RSP
MOVD R0, 32(R2) // save r1
MOVD R1, 40(R2) // save r2
CMP $-1, R0
BNE ok
SUB $16, RSP // push structure pointer
MOVD R2, (RSP)
BL libc_error(SB)
MOVW (R0), R0
MOVD (RSP), R2 // pop structure pointer
ADD $16, RSP
MOVD R0, 48(R2) // save err
ok:
RET
// syscall6 calls a function in libc on behalf of the syscall package.
// syscall6 takes a pointer to a struct like:
// struct {
// fn uintptr
// a1 uintptr
// a2 uintptr
// a3 uintptr
// a4 uintptr
// a5 uintptr
// a6 uintptr
// r1 uintptr
// r2 uintptr
// err uintptr
// }
// syscall6 must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscall6(SB),NOSPLIT,$0
SUB $16, RSP // push structure pointer
MOVD R0, 8(RSP)
MOVD 0(R0), R12 // fn
MOVD 16(R0), R1 // a2
MOVD 24(R0), R2 // a3
MOVD 32(R0), R3 // a4
MOVD 40(R0), R4 // a5
MOVD 48(R0), R5 // a6
MOVD 8(R0), R0 // a1
// If fn is declared as vararg, we have to pass the vararg arguments on the stack.
// See syscall above. The only function this applies to is openat, for which the 4th
// arg must be on the stack.
MOVD R3, (RSP)
BL (R12)
MOVD 8(RSP), R2 // pop structure pointer
ADD $16, RSP
MOVD R0, 56(R2) // save r1
MOVD R1, 64(R2) // save r2
CMPW $-1, R0
BNE ok
SUB $16, RSP // push structure pointer
MOVD R2, 8(RSP)
BL libc_error(SB)
MOVW (R0), R0
MOVD 8(RSP), R2 // pop structure pointer
ADD $16, RSP
MOVD R0, 72(R2) // save err
ok:
RET
// syscall6X calls a function in libc on behalf of the syscall package.
// syscall6X takes a pointer to a struct like:
// struct {
// fn uintptr
// a1 uintptr
// a2 uintptr
// a3 uintptr
// a4 uintptr
// a5 uintptr
// a6 uintptr
// r1 uintptr
// r2 uintptr
// err uintptr
// }
// syscall6X must be called on the g0 stack with the
// C calling convention (use libcCall).
TEXT runtime·syscall6X(SB),NOSPLIT,$0
SUB $16, RSP // push structure pointer
MOVD R0, (RSP)
MOVD 0(R0), R12 // fn
MOVD 16(R0), R1 // a2
MOVD 24(R0), R2 // a3
MOVD 32(R0), R3 // a4
MOVD 40(R0), R4 // a5
MOVD 48(R0), R5 // a6
MOVD 8(R0), R0 // a1
BL (R12)
MOVD (RSP), R2 // pop structure pointer
ADD $16, RSP
MOVD R0, 56(R2) // save r1
MOVD R1, 64(R2) // save r2
CMP $-1, R0
BNE ok
SUB $16, RSP // push structure pointer
MOVD R2, (RSP)
BL libc_error(SB)
MOVW (R0), R0
MOVD (RSP), R2 // pop structure pointer
ADD $16, RSP
MOVD R0, 72(R2) // save err
ok:
RET