| // Copyright 2014 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // System calls and other sys.stuff for ARM, Darwin |
| // See http://fxr.watson.org/fxr/source/bsd/kern/syscalls.c?v=xnu-1228 |
| // or /usr/include/sys/syscall.h (on a Mac) for system call numbers. |
| |
| #include "go_asm.h" |
| #include "go_tls.h" |
| #include "textflag.h" |
| |
| // Copied from /usr/include/sys/syscall.h |
| #define SYS_exit 1 |
| #define SYS_read 3 |
| #define SYS_write 4 |
| #define SYS_open 5 |
| #define SYS_close 6 |
| #define SYS_mmap 197 |
| #define SYS_munmap 73 |
| #define SYS_madvise 75 |
| #define SYS_mincore 78 |
| #define SYS_gettimeofday 116 |
| #define SYS_kill 37 |
| #define SYS_getpid 20 |
| #define SYS___pthread_kill 328 |
| #define SYS_pthread_sigmask 329 |
| #define SYS_setitimer 83 |
| #define SYS___sysctl 202 |
| #define SYS_sigaction 46 |
| #define SYS_sigreturn 184 |
| #define SYS_select 93 |
| #define SYS_bsdthread_register 366 |
| #define SYS_bsdthread_create 360 |
| #define SYS_bsdthread_terminate 361 |
| #define SYS_kqueue 362 |
| #define SYS_kevent 363 |
| #define SYS_fcntl 92 |
| |
| TEXT notok<>(SB),NOSPLIT,$0 |
| MOVW $0, R8 |
| MOVW R8, (R8) |
| B 0(PC) |
| |
| TEXT runtime·open(SB),NOSPLIT,$0 |
| MOVW name+0(FP), R0 |
| MOVW mode+4(FP), R1 |
| MOVW perm+8(FP), R2 |
| MOVW $SYS_open, R12 |
| SWI $0x80 |
| MOVW.CS $-1, R0 |
| MOVW R0, ret+12(FP) |
| RET |
| |
| TEXT runtime·closefd(SB),NOSPLIT,$0 |
| MOVW fd+0(FP), R0 |
| MOVW $SYS_close, R12 |
| SWI $0x80 |
| MOVW.CS $-1, R0 |
| MOVW R0, ret+4(FP) |
| RET |
| |
| TEXT runtime·write(SB),NOSPLIT,$0 |
| MOVW fd+0(FP), R0 |
| MOVW p+4(FP), R1 |
| MOVW n+8(FP), R2 |
| MOVW $SYS_write, R12 |
| SWI $0x80 |
| MOVW.CS $-1, R0 |
| MOVW R0, ret+12(FP) |
| RET |
| |
| TEXT runtime·read(SB),NOSPLIT,$0 |
| MOVW fd+0(FP), R0 |
| MOVW p+4(FP), R1 |
| MOVW n+8(FP), R2 |
| MOVW $SYS_read, R12 |
| SWI $0x80 |
| MOVW.CS $-1, R0 |
| MOVW R0, ret+12(FP) |
| RET |
| |
| TEXT runtime·exit(SB),NOSPLIT,$-4 |
| MOVW code+0(FP), R0 |
| MOVW $SYS_exit, R12 |
| SWI $0x80 |
| MOVW $1234, R0 |
| MOVW $1002, R1 |
| MOVW R0, (R1) // fail hard |
| |
| // Exit this OS thread (like pthread_exit, which eventually |
| // calls __bsdthread_terminate). |
| TEXT runtime·exit1(SB),NOSPLIT,$0 |
| MOVW $SYS_bsdthread_terminate, R12 |
| SWI $0x80 |
| MOVW $1234, R0 |
| MOVW $1003, R1 |
| MOVW R0, (R1) // fail hard |
| |
| TEXT runtime·raise(SB),NOSPLIT,$0 |
| // Ideally we'd send the signal to the current thread, |
| // not the whole process, but that's too hard on OS X. |
| JMP runtime·raiseproc(SB) |
| |
| TEXT runtime·raiseproc(SB),NOSPLIT,$24 |
| MOVW $SYS_getpid, R12 |
| SWI $0x80 |
| // arg 1 pid already in R0 from getpid |
| MOVW unnamed+0(FP), R1 // arg 2 - signal |
| MOVW $1, R2 // arg 3 - posix |
| MOVW $SYS_kill, R12 |
| SWI $0x80 |
| RET |
| |
| TEXT runtime·mmap(SB),NOSPLIT,$0 |
| MOVW addr+0(FP), R0 |
| MOVW n+4(FP), R1 |
| MOVW prot+8(FP), R2 |
| MOVW flags+12(FP), R3 |
| MOVW fd+16(FP), R4 |
| MOVW off+20(FP), R5 |
| MOVW $0, R6 // off_t is uint64_t |
| MOVW $SYS_mmap, R12 |
| SWI $0x80 |
| MOVW R0, ret+24(FP) |
| RET |
| |
| TEXT runtime·munmap(SB),NOSPLIT,$0 |
| MOVW addr+0(FP), R0 |
| MOVW n+4(FP), R1 |
| MOVW $SYS_munmap, R12 |
| SWI $0x80 |
| BL.CS notok<>(SB) |
| RET |
| |
| TEXT runtime·madvise(SB),NOSPLIT,$0 |
| MOVW addr+0(FP), R0 |
| MOVW n+4(FP), R1 |
| MOVW flags+8(FP), R2 |
| MOVW $SYS_madvise, R12 |
| SWI $0x80 |
| BL.CS notok<>(SB) |
| RET |
| |
| TEXT runtime·setitimer(SB),NOSPLIT,$0 |
| MOVW mode+0(FP), R0 |
| MOVW new+4(FP), R1 |
| MOVW old+8(FP), R2 |
| MOVW $SYS_setitimer, R12 |
| SWI $0x80 |
| RET |
| |
| TEXT runtime·mincore(SB),NOSPLIT,$0 |
| MOVW addr+0(FP), R0 |
| MOVW n+4(FP), R1 |
| MOVW dst+8(FP), R2 |
| MOVW $SYS_mincore, R12 |
| SWI $0x80 |
| MOVW R0, ret+12(FP) |
| RET |
| |
| TEXT time·now(SB), 7, $32 |
| MOVW $8(R13), R0 // timeval |
| MOVW $0, R1 // zone |
| MOVW $0, R2 // see issue 16570 |
| MOVW $SYS_gettimeofday, R12 |
| SWI $0x80 // Note: R0 is tv_sec, R1 is tv_usec |
| CMP $0, R0 |
| BNE inreg |
| MOVW 8(R13), R0 |
| MOVW 12(R13), R1 |
| inreg: |
| MOVW R1, R2 // usec |
| MOVW R0, sec+0(FP) |
| MOVW $0, R1 |
| MOVW R1, loc+4(FP) |
| MOVW $1000, R3 |
| MUL R3, R2 |
| MOVW R2, nsec+8(FP) |
| RET |
| |
| TEXT runtime·nanotime(SB),NOSPLIT,$32 |
| MOVW $8(R13), R0 // timeval |
| MOVW $0, R1 // zone |
| MOVW $0, R2 // see issue 16570 |
| MOVW $SYS_gettimeofday, R12 |
| SWI $0x80 // Note: R0 is tv_sec, R1 is tv_usec |
| CMP $0, R0 |
| BNE inreg |
| MOVW 8(R13), R0 |
| MOVW 12(R13), R1 |
| inreg: |
| MOVW R1, R2 |
| MOVW $1000000000, R3 |
| MULLU R0, R3, (R1, R0) |
| MOVW $1000, R3 |
| MOVW $0, R4 |
| MUL R3, R2 |
| ADD.S R2, R0 |
| ADC R4, R1 |
| |
| MOVW R0, ret_lo+0(FP) |
| MOVW R1, ret_hi+4(FP) |
| RET |
| |
| TEXT runtime·sigfwd(SB),NOSPLIT,$0-16 |
| MOVW sig+4(FP), R0 |
| MOVW info+8(FP), R1 |
| MOVW ctx+12(FP), R2 |
| MOVW fn+0(FP), R11 |
| MOVW R13, R4 |
| SUB $24, R13 |
| BIC $0x7, R13 // alignment for ELF ABI |
| BL (R11) |
| MOVW R4, R13 |
| RET |
| |
| // Sigtramp's job is to call the actual signal handler. |
| // It is called with the following arguments on the stack: |
| // LR "return address" - ignored |
| // R0 actual handler |
| // R1 siginfo style - ignored |
| // R2 signal number |
| // R3 siginfo |
| // -4(FP) context, beware that 0(FP) is the saved LR |
| TEXT runtime·sigtramp(SB),NOSPLIT,$0 |
| // this might be called in external code context, |
| // where g is not set. |
| // first save R0, because runtime·load_g will clobber it |
| MOVM.DB.W [R0], (R13) |
| MOVB runtime·iscgo(SB), R0 |
| CMP $0, R0 |
| BL.NE runtime·load_g(SB) |
| |
| CMP $0, g |
| BNE cont |
| // fake function call stack frame for badsignal |
| // we only need to pass R2 (signal number), but |
| // badsignal will expect R2 at 4(R13), so we also |
| // push R1 onto stack. turns out we do need R1 |
| // to do sigreturn. |
| MOVM.DB.W [R1,R2], (R13) |
| MOVW $runtime·badsignal(SB), R11 |
| BL (R11) |
| MOVM.IA.W [R1], (R13) // saved infostype |
| ADD $(4+4), R13 // +4: also need to remove the pushed R0. |
| MOVW ucontext-4(FP), R0 // load ucontext |
| B ret |
| |
| cont: |
| // Restore R0 |
| MOVM.IA.W (R13), [R0] |
| |
| // NOTE: some Darwin/ARM kernels always use the main stack to run the |
| // signal handler. We need to switch to gsignal ourselves. |
| MOVW g_m(g), R11 |
| MOVW m_gsignal(R11), R5 |
| MOVW (g_stack+stack_hi)(R5), R6 |
| SUB $28, R6 |
| |
| // copy arguments for call to sighandler |
| MOVW R2, 4(R6) // signal num |
| MOVW R3, 8(R6) // signal info |
| MOVW g, 16(R6) // old_g |
| MOVW context-4(FP), R4 |
| MOVW R4, 12(R6) // context |
| |
| // Backup ucontext and infostyle |
| MOVW R4, 20(R6) |
| MOVW R1, 24(R6) |
| |
| // switch stack and g |
| MOVW R6, R13 // sigtramp is not re-entrant, so no need to back up R13. |
| MOVW R5, g |
| |
| BL (R0) |
| |
| // call sigreturn |
| MOVW 20(R13), R0 // saved ucontext |
| MOVW 24(R13), R1 // saved infostyle |
| ret: |
| MOVW $SYS_sigreturn, R12 // sigreturn(ucontext, infostyle) |
| SWI $0x80 |
| |
| // if sigreturn fails, we can do nothing but exit |
| B runtime·exit(SB) |
| |
| TEXT runtime·sigprocmask(SB),NOSPLIT,$0 |
| MOVW sig+0(FP), R0 |
| MOVW new+4(FP), R1 |
| MOVW old+8(FP), R2 |
| MOVW $SYS_pthread_sigmask, R12 |
| SWI $0x80 |
| BL.CS notok<>(SB) |
| RET |
| |
| TEXT runtime·sigaction(SB),NOSPLIT,$0 |
| MOVW mode+0(FP), R0 |
| MOVW new+4(FP), R1 |
| MOVW old+8(FP), R2 |
| MOVW $SYS_sigaction, R12 |
| SWI $0x80 |
| RET |
| |
| TEXT runtime·usleep(SB),NOSPLIT,$12 |
| MOVW usec+0(FP), R0 |
| CALL runtime·usplitR0(SB) |
| MOVW R0, a-12(SP) |
| MOVW R1, b-8(SP) |
| |
| // select(0, 0, 0, 0, &tv) |
| MOVW $0, R0 |
| MOVW $0, R1 |
| MOVW $0, R2 |
| MOVW $0, R3 |
| MOVW $a-12(SP), R4 |
| MOVW $SYS_select, R12 |
| SWI $0x80 |
| RET |
| |
| TEXT ·publicationBarrier(SB),NOSPLIT,$-4-0 |
| B runtime·armPublicationBarrier(SB) |
| |
| TEXT runtime·sysctl(SB),NOSPLIT,$0 |
| MOVW mib+0(FP), R0 |
| MOVW miblen+4(FP), R1 |
| MOVW out+8(FP), R2 |
| MOVW size+12(FP), R3 |
| MOVW dst+16(FP), R4 |
| MOVW ndst+20(FP), R5 |
| MOVW $SYS___sysctl, R12 // syscall entry |
| SWI $0x80 |
| BCC sysctl_ret |
| RSB $0, R0, R0 |
| MOVW R0, ret+24(FP) |
| RET |
| sysctl_ret: |
| MOVW $0, R0 |
| MOVW R0, ret+24(FP) |
| RET |
| |
| // Thread related functions |
| // func bsdthread_create(stk, arg unsafe.Pointer, fn uintptr) int32 |
| TEXT runtime·bsdthread_create(SB),NOSPLIT,$0 |
| // Set up arguments to bsdthread_create system call. |
| // The ones in quotes pass through to the thread callback |
| // uninterpreted, so we can put whatever we want there. |
| MOVW fn+8(FP), R0 // "func" |
| MOVW arg+4(FP), R1 // "arg" |
| MOVW stk+0(FP), R2 // stack |
| MOVW $0x01000000, R4 // flags = PTHREAD_START_CUSTOM |
| MOVW $0, R5 // paranoia |
| MOVW $SYS_bsdthread_create, R12 |
| SWI $0x80 |
| BCC create_ret |
| RSB $0, R0, R0 |
| MOVW R0, ret+12(FP) |
| RET |
| create_ret: |
| MOVW $0, R0 |
| MOVW R0, ret+12(FP) |
| RET |
| |
| // The thread that bsdthread_create creates starts executing here, |
| // because we registered this function using bsdthread_register |
| // at startup. |
| // R0 = "pthread" |
| // R1 = mach thread port |
| // R2 = "func" (= fn) |
| // R3 = "arg" (= m) |
| // R4 = stack |
| // R5 = flags (= 0) |
| // XXX: how to deal with R4/SP? ref: Libc-594.9.1/arm/pthreads/thread_start.s |
| TEXT runtime·bsdthread_start(SB),NOSPLIT,$0 |
| MOVW R1, m_procid(R3) // thread port is m->procid |
| MOVW m_g0(R3), g |
| MOVW R3, g_m(g) |
| // ARM don't have runtime·stackcheck(SB) |
| // disable runfast mode of vfp |
| EOR R12, R12 |
| WORD $0xeee1ca10 // fmxr fpscr, ip |
| BL (R2) // fn |
| BL runtime·exit1(SB) |
| RET |
| |
| // int32 bsdthread_register(void) |
| // registers callbacks for threadstart (see bsdthread_create above |
| // and wqthread and pthsize (not used). returns 0 on success. |
| TEXT runtime·bsdthread_register(SB),NOSPLIT,$0 |
| MOVW $runtime·bsdthread_start(SB), R0 // threadstart |
| MOVW $0, R1 // wqthread, not used by us |
| MOVW $0, R2 // pthsize, not used by us |
| MOVW $0, R3 // dummy_value [sic] |
| MOVW $0, R4 // targetconc_ptr |
| MOVW $0, R5 // dispatchqueue_offset |
| MOVW $SYS_bsdthread_register, R12 // bsdthread_register |
| SWI $0x80 |
| MOVW R0, ret+0(FP) |
| RET |
| |
| // uint32 mach_msg_trap(void*, uint32, uint32, uint32, uint32, uint32, uint32) |
| TEXT runtime·mach_msg_trap(SB),NOSPLIT,$0 |
| MOVW h+0(FP), R0 |
| MOVW op+4(FP), R1 |
| MOVW send_size+8(FP), R2 |
| MOVW rcv_size+12(FP), R3 |
| MOVW rcv_name+16(FP), R4 |
| MOVW timeout+20(FP), R5 |
| MOVW notify+24(FP), R6 |
| MVN $30, R12 |
| SWI $0x80 |
| MOVW R0, ret+28(FP) |
| RET |
| |
| TEXT runtime·mach_task_self(SB),NOSPLIT,$0 |
| MVN $27, R12 // task_self_trap |
| SWI $0x80 |
| MOVW R0, ret+0(FP) |
| RET |
| |
| TEXT runtime·mach_thread_self(SB),NOSPLIT,$0 |
| MVN $26, R12 // thread_self_trap |
| SWI $0x80 |
| MOVW R0, ret+0(FP) |
| RET |
| |
| TEXT runtime·mach_reply_port(SB),NOSPLIT,$0 |
| MVN $25, R12 // mach_reply_port |
| SWI $0x80 |
| MOVW R0, ret+0(FP) |
| RET |
| |
| // Mach provides trap versions of the semaphore ops, |
| // instead of requiring the use of RPC. |
| |
| // uint32 mach_semaphore_wait(uint32) |
| TEXT runtime·mach_semaphore_wait(SB),NOSPLIT,$0 |
| MOVW sema+0(FP), R0 |
| MVN $35, R12 // semaphore_wait_trap |
| SWI $0x80 |
| MOVW R0, ret+4(FP) |
| RET |
| |
| // uint32 mach_semaphore_timedwait(uint32, uint32, uint32) |
| TEXT runtime·mach_semaphore_timedwait(SB),NOSPLIT,$0 |
| MOVW sema+0(FP), R0 |
| MOVW sec+4(FP), R1 |
| MOVW nsec+8(FP), R2 |
| MVN $37, R12 // semaphore_timedwait_trap |
| SWI $0x80 |
| MOVW R0, ret+12(FP) |
| RET |
| |
| // uint32 mach_semaphore_signal(uint32) |
| TEXT runtime·mach_semaphore_signal(SB),NOSPLIT,$0 |
| MOVW sema+0(FP), R0 |
| MVN $32, R12 // semaphore_signal_trap |
| SWI $0x80 |
| MOVW R0, ret+4(FP) |
| RET |
| |
| // uint32 mach_semaphore_signal_all(uint32) |
| TEXT runtime·mach_semaphore_signal_all(SB),NOSPLIT,$0 |
| MOVW sema+0(FP), R0 |
| MVN $33, R12 // semaphore_signal_all_trap |
| SWI $0x80 |
| MOVW R0, ret+4(FP) |
| RET |
| |
| // int32 runtime·kqueue(void) |
| TEXT runtime·kqueue(SB),NOSPLIT,$0 |
| MOVW $SYS_kqueue, R12 |
| SWI $0x80 |
| RSB.CS $0, R0, R0 |
| MOVW R0, ret+0(FP) |
| RET |
| |
| // int32 runtime·kevent(int kq, Kevent *changelist, int nchanges, Kevent *eventlist, int events, Timespec *timeout) |
| TEXT runtime·kevent(SB),NOSPLIT,$0 |
| MOVW $SYS_kevent, R12 |
| MOVW kq+0(FP), R0 |
| MOVW ch+4(FP), R1 |
| MOVW nch+8(FP), R2 |
| MOVW ev+12(FP), R3 |
| MOVW nev+16(FP), R4 |
| MOVW ts+20(FP), R5 |
| SWI $0x80 |
| RSB.CS $0, R0, R0 |
| MOVW R0, ret+24(FP) |
| RET |
| |
| // int32 runtime·closeonexec(int32 fd) |
| TEXT runtime·closeonexec(SB),NOSPLIT,$0 |
| MOVW $SYS_fcntl, R12 |
| MOVW fd+0(FP), R0 |
| MOVW $2, R1 // F_SETFD |
| MOVW $1, R2 // FD_CLOEXEC |
| SWI $0x80 |
| RET |
| |
| // sigaltstack on some darwin/arm version is buggy and will always |
| // run the signal handler on the main stack, so our sigtramp has |
| // to do the stack switch ourselves. |
| TEXT runtime·sigaltstack(SB),NOSPLIT,$0 |
| RET |