blob: 80b2b5338c17ce4c32aaf2921aa1c0fe9e5caa91 [file] [log] [blame]
// Copyright 2014 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package runtime
// This file contains the implementation of Go's map type.
//
// A map is just a hash table. The data is arranged
// into an array of buckets. Each bucket contains up to
// 8 key/value pairs. The low-order bits of the hash are
// used to select a bucket. Each bucket contains a few
// high-order bits of each hash to distinguish the entries
// within a single bucket.
//
// If more than 8 keys hash to a bucket, we chain on
// extra buckets.
//
// When the hashtable grows, we allocate a new array
// of buckets twice as big. Buckets are incrementally
// copied from the old bucket array to the new bucket array.
//
// Map iterators walk through the array of buckets and
// return the keys in walk order (bucket #, then overflow
// chain order, then bucket index). To maintain iteration
// semantics, we never move keys within their bucket (if
// we did, keys might be returned 0 or 2 times). When
// growing the table, iterators remain iterating through the
// old table and must check the new table if the bucket
// they are iterating through has been moved ("evacuated")
// to the new table.
// Picking loadFactor: too large and we have lots of overflow
// buckets, too small and we waste a lot of space. I wrote
// a simple program to check some stats for different loads:
// (64-bit, 8 byte keys and values)
// loadFactor %overflow bytes/entry hitprobe missprobe
// 4.00 2.13 20.77 3.00 4.00
// 4.50 4.05 17.30 3.25 4.50
// 5.00 6.85 14.77 3.50 5.00
// 5.50 10.55 12.94 3.75 5.50
// 6.00 15.27 11.67 4.00 6.00
// 6.50 20.90 10.79 4.25 6.50
// 7.00 27.14 10.15 4.50 7.00
// 7.50 34.03 9.73 4.75 7.50
// 8.00 41.10 9.40 5.00 8.00
//
// %overflow = percentage of buckets which have an overflow bucket
// bytes/entry = overhead bytes used per key/value pair
// hitprobe = # of entries to check when looking up a present key
// missprobe = # of entries to check when looking up an absent key
//
// Keep in mind this data is for maximally loaded tables, i.e. just
// before the table grows. Typical tables will be somewhat less loaded.
import (
"runtime/internal/atomic"
"runtime/internal/sys"
"unsafe"
)
const (
// Maximum number of key/value pairs a bucket can hold.
bucketCntBits = 3
bucketCnt = 1 << bucketCntBits
// Maximum average load of a bucket that triggers growth.
loadFactor = 6.5
// Maximum key or value size to keep inline (instead of mallocing per element).
// Must fit in a uint8.
// Fast versions cannot handle big values - the cutoff size for
// fast versions in ../../cmd/internal/gc/walk.go must be at most this value.
maxKeySize = 128
maxValueSize = 128
// data offset should be the size of the bmap struct, but needs to be
// aligned correctly. For amd64p32 this means 64-bit alignment
// even though pointers are 32 bit.
dataOffset = unsafe.Offsetof(struct {
b bmap
v int64
}{}.v)
// Possible tophash values. We reserve a few possibilities for special marks.
// Each bucket (including its overflow buckets, if any) will have either all or none of its
// entries in the evacuated* states (except during the evacuate() method, which only happens
// during map writes and thus no one else can observe the map during that time).
empty = 0 // cell is empty
evacuatedEmpty = 1 // cell is empty, bucket is evacuated.
evacuatedX = 2 // key/value is valid. Entry has been evacuated to first half of larger table.
evacuatedY = 3 // same as above, but evacuated to second half of larger table.
minTopHash = 4 // minimum tophash for a normal filled cell.
// flags
iterator = 1 // there may be an iterator using buckets
oldIterator = 2 // there may be an iterator using oldbuckets
hashWriting = 4 // a goroutine is writing to the map
// sentinel bucket ID for iterator checks
noCheck = 1<<(8*sys.PtrSize) - 1
)
// A header for a Go map.
type hmap struct {
// Note: the format of the Hmap is encoded in ../../cmd/internal/gc/reflect.go and
// ../reflect/type.go. Don't change this structure without also changing that code!
count int // # live cells == size of map. Must be first (used by len() builtin)
flags uint8
B uint8 // log_2 of # of buckets (can hold up to loadFactor * 2^B items)
hash0 uint32 // hash seed
buckets unsafe.Pointer // array of 2^B Buckets. may be nil if count==0.
oldbuckets unsafe.Pointer // previous bucket array of half the size, non-nil only when growing
nevacuate uintptr // progress counter for evacuation (buckets less than this have been evacuated)
// If both key and value do not contain pointers and are inline, then we mark bucket
// type as containing no pointers. This avoids scanning such maps.
// However, bmap.overflow is a pointer. In order to keep overflow buckets
// alive, we store pointers to all overflow buckets in hmap.overflow.
// Overflow is used only if key and value do not contain pointers.
// overflow[0] contains overflow buckets for hmap.buckets.
// overflow[1] contains overflow buckets for hmap.oldbuckets.
// The first indirection allows us to reduce static size of hmap.
// The second indirection allows to store a pointer to the slice in hiter.
overflow *[2]*[]*bmap
}
// A bucket for a Go map.
type bmap struct {
tophash [bucketCnt]uint8
// Followed by bucketCnt keys and then bucketCnt values.
// NOTE: packing all the keys together and then all the values together makes the
// code a bit more complicated than alternating key/value/key/value/... but it allows
// us to eliminate padding which would be needed for, e.g., map[int64]int8.
// Followed by an overflow pointer.
}
// A hash iteration structure.
// If you modify hiter, also change cmd/internal/gc/reflect.go to indicate
// the layout of this structure.
type hiter struct {
key unsafe.Pointer // Must be in first position. Write nil to indicate iteration end (see cmd/internal/gc/range.go).
value unsafe.Pointer // Must be in second position (see cmd/internal/gc/range.go).
t *maptype
h *hmap
buckets unsafe.Pointer // bucket ptr at hash_iter initialization time
bptr *bmap // current bucket
overflow [2]*[]*bmap // keeps overflow buckets alive
startBucket uintptr // bucket iteration started at
offset uint8 // intra-bucket offset to start from during iteration (should be big enough to hold bucketCnt-1)
wrapped bool // already wrapped around from end of bucket array to beginning
B uint8
i uint8
bucket uintptr
checkBucket uintptr
}
func evacuated(b *bmap) bool {
h := b.tophash[0]
return h > empty && h < minTopHash
}
func (b *bmap) overflow(t *maptype) *bmap {
return *(**bmap)(add(unsafe.Pointer(b), uintptr(t.bucketsize)-sys.PtrSize))
}
func (h *hmap) setoverflow(t *maptype, b, ovf *bmap) {
if t.bucket.kind&kindNoPointers != 0 {
h.createOverflow()
*h.overflow[0] = append(*h.overflow[0], ovf)
}
*(**bmap)(add(unsafe.Pointer(b), uintptr(t.bucketsize)-sys.PtrSize)) = ovf
}
func (h *hmap) createOverflow() {
if h.overflow == nil {
h.overflow = new([2]*[]*bmap)
}
if h.overflow[0] == nil {
h.overflow[0] = new([]*bmap)
}
}
// makemap implements a Go map creation make(map[k]v, hint)
// If the compiler has determined that the map or the first bucket
// can be created on the stack, h and/or bucket may be non-nil.
// If h != nil, the map can be created directly in h.
// If bucket != nil, bucket can be used as the first bucket.
func makemap(t *maptype, hint int64, h *hmap, bucket unsafe.Pointer) *hmap {
if sz := unsafe.Sizeof(hmap{}); sz > 48 || sz != t.hmap.size {
println("runtime: sizeof(hmap) =", sz, ", t.hmap.size =", t.hmap.size)
throw("bad hmap size")
}
if hint < 0 || int64(int32(hint)) != hint {
panic("makemap: size out of range")
// TODO: make hint an int, then none of this nonsense
}
if !ismapkey(t.key) {
throw("runtime.makemap: unsupported map key type")
}
// check compiler's and reflect's math
if t.key.size > maxKeySize && (!t.indirectkey || t.keysize != uint8(sys.PtrSize)) ||
t.key.size <= maxKeySize && (t.indirectkey || t.keysize != uint8(t.key.size)) {
throw("key size wrong")
}
if t.elem.size > maxValueSize && (!t.indirectvalue || t.valuesize != uint8(sys.PtrSize)) ||
t.elem.size <= maxValueSize && (t.indirectvalue || t.valuesize != uint8(t.elem.size)) {
throw("value size wrong")
}
// invariants we depend on. We should probably check these at compile time
// somewhere, but for now we'll do it here.
if t.key.align > bucketCnt {
throw("key align too big")
}
if t.elem.align > bucketCnt {
throw("value align too big")
}
if t.key.size%uintptr(t.key.align) != 0 {
throw("key size not a multiple of key align")
}
if t.elem.size%uintptr(t.elem.align) != 0 {
throw("value size not a multiple of value align")
}
if bucketCnt < 8 {
throw("bucketsize too small for proper alignment")
}
if dataOffset%uintptr(t.key.align) != 0 {
throw("need padding in bucket (key)")
}
if dataOffset%uintptr(t.elem.align) != 0 {
throw("need padding in bucket (value)")
}
// make sure zeroptr is large enough
mapzero(t.elem)
// find size parameter which will hold the requested # of elements
B := uint8(0)
for ; hint > bucketCnt && float32(hint) > loadFactor*float32(uintptr(1)<<B); B++ {
}
// allocate initial hash table
// if B == 0, the buckets field is allocated lazily later (in mapassign)
// If hint is large zeroing this memory could take a while.
buckets := bucket
if B != 0 {
buckets = newarray(t.bucket, uintptr(1)<<B)
}
// initialize Hmap
if h == nil {
h = (*hmap)(newobject(t.hmap))
}
h.count = 0
h.B = B
h.flags = 0
h.hash0 = fastrand1()
h.buckets = buckets
h.oldbuckets = nil
h.nevacuate = 0
return h
}
// mapaccess1 returns a pointer to h[key]. Never returns nil, instead
// it will return a reference to the zero object for the value type if
// the key is not in the map.
// NOTE: The returned pointer may keep the whole map live, so don't
// hold onto it for very long.
func mapaccess1(t *maptype, h *hmap, key unsafe.Pointer) unsafe.Pointer {
if raceenabled && h != nil {
callerpc := getcallerpc(unsafe.Pointer(&t))
pc := funcPC(mapaccess1)
racereadpc(unsafe.Pointer(h), callerpc, pc)
raceReadObjectPC(t.key, key, callerpc, pc)
}
if msanenabled && h != nil {
msanread(key, t.key.size)
}
if h == nil || h.count == 0 {
return atomic.Loadp(unsafe.Pointer(&zeroptr))
}
if h.flags&hashWriting != 0 {
throw("concurrent map read and map write")
}
alg := t.key.alg
hash := alg.hash(key, uintptr(h.hash0))
m := uintptr(1)<<h.B - 1
b := (*bmap)(add(h.buckets, (hash&m)*uintptr(t.bucketsize)))
if c := h.oldbuckets; c != nil {
oldb := (*bmap)(add(c, (hash&(m>>1))*uintptr(t.bucketsize)))
if !evacuated(oldb) {
b = oldb
}
}
top := uint8(hash >> (sys.PtrSize*8 - 8))
if top < minTopHash {
top += minTopHash
}
for {
for i := uintptr(0); i < bucketCnt; i++ {
if b.tophash[i] != top {
continue
}
k := add(unsafe.Pointer(b), dataOffset+i*uintptr(t.keysize))
if t.indirectkey {
k = *((*unsafe.Pointer)(k))
}
if alg.equal(key, k) {
v := add(unsafe.Pointer(b), dataOffset+bucketCnt*uintptr(t.keysize)+i*uintptr(t.valuesize))
if t.indirectvalue {
v = *((*unsafe.Pointer)(v))
}
return v
}
}
b = b.overflow(t)
if b == nil {
return atomic.Loadp(unsafe.Pointer(&zeroptr))
}
}
}
func mapaccess2(t *maptype, h *hmap, key unsafe.Pointer) (unsafe.Pointer, bool) {
if raceenabled && h != nil {
callerpc := getcallerpc(unsafe.Pointer(&t))
pc := funcPC(mapaccess2)
racereadpc(unsafe.Pointer(h), callerpc, pc)
raceReadObjectPC(t.key, key, callerpc, pc)
}
if msanenabled && h != nil {
msanread(key, t.key.size)
}
if h == nil || h.count == 0 {
return atomic.Loadp(unsafe.Pointer(&zeroptr)), false
}
if h.flags&hashWriting != 0 {
throw("concurrent map read and map write")
}
alg := t.key.alg
hash := alg.hash(key, uintptr(h.hash0))
m := uintptr(1)<<h.B - 1
b := (*bmap)(unsafe.Pointer(uintptr(h.buckets) + (hash&m)*uintptr(t.bucketsize)))
if c := h.oldbuckets; c != nil {
oldb := (*bmap)(unsafe.Pointer(uintptr(c) + (hash&(m>>1))*uintptr(t.bucketsize)))
if !evacuated(oldb) {
b = oldb
}
}
top := uint8(hash >> (sys.PtrSize*8 - 8))
if top < minTopHash {
top += minTopHash
}
for {
for i := uintptr(0); i < bucketCnt; i++ {
if b.tophash[i] != top {
continue
}
k := add(unsafe.Pointer(b), dataOffset+i*uintptr(t.keysize))
if t.indirectkey {
k = *((*unsafe.Pointer)(k))
}
if alg.equal(key, k) {
v := add(unsafe.Pointer(b), dataOffset+bucketCnt*uintptr(t.keysize)+i*uintptr(t.valuesize))
if t.indirectvalue {
v = *((*unsafe.Pointer)(v))
}
return v, true
}
}
b = b.overflow(t)
if b == nil {
return atomic.Loadp(unsafe.Pointer(&zeroptr)), false
}
}
}
// returns both key and value. Used by map iterator
func mapaccessK(t *maptype, h *hmap, key unsafe.Pointer) (unsafe.Pointer, unsafe.Pointer) {
if h == nil || h.count == 0 {
return nil, nil
}
if h.flags&hashWriting != 0 {
throw("concurrent map read and map write")
}
alg := t.key.alg
hash := alg.hash(key, uintptr(h.hash0))
m := uintptr(1)<<h.B - 1
b := (*bmap)(unsafe.Pointer(uintptr(h.buckets) + (hash&m)*uintptr(t.bucketsize)))
if c := h.oldbuckets; c != nil {
oldb := (*bmap)(unsafe.Pointer(uintptr(c) + (hash&(m>>1))*uintptr(t.bucketsize)))
if !evacuated(oldb) {
b = oldb
}
}
top := uint8(hash >> (sys.PtrSize*8 - 8))
if top < minTopHash {
top += minTopHash
}
for {
for i := uintptr(0); i < bucketCnt; i++ {
if b.tophash[i] != top {
continue
}
k := add(unsafe.Pointer(b), dataOffset+i*uintptr(t.keysize))
if t.indirectkey {
k = *((*unsafe.Pointer)(k))
}
if alg.equal(key, k) {
v := add(unsafe.Pointer(b), dataOffset+bucketCnt*uintptr(t.keysize)+i*uintptr(t.valuesize))
if t.indirectvalue {
v = *((*unsafe.Pointer)(v))
}
return k, v
}
}
b = b.overflow(t)
if b == nil {
return nil, nil
}
}
}
func mapassign1(t *maptype, h *hmap, key unsafe.Pointer, val unsafe.Pointer) {
if h == nil {
panic("assignment to entry in nil map")
}
if raceenabled {
callerpc := getcallerpc(unsafe.Pointer(&t))
pc := funcPC(mapassign1)
racewritepc(unsafe.Pointer(h), callerpc, pc)
raceReadObjectPC(t.key, key, callerpc, pc)
raceReadObjectPC(t.elem, val, callerpc, pc)
}
if msanenabled {
msanread(key, t.key.size)
msanread(val, t.elem.size)
}
if h.flags&hashWriting != 0 {
throw("concurrent map writes")
}
h.flags |= hashWriting
alg := t.key.alg
hash := alg.hash(key, uintptr(h.hash0))
if h.buckets == nil {
h.buckets = newarray(t.bucket, 1)
}
again:
bucket := hash & (uintptr(1)<<h.B - 1)
if h.oldbuckets != nil {
growWork(t, h, bucket)
}
b := (*bmap)(unsafe.Pointer(uintptr(h.buckets) + bucket*uintptr(t.bucketsize)))
top := uint8(hash >> (sys.PtrSize*8 - 8))
if top < minTopHash {
top += minTopHash
}
var inserti *uint8
var insertk unsafe.Pointer
var insertv unsafe.Pointer
for {
for i := uintptr(0); i < bucketCnt; i++ {
if b.tophash[i] != top {
if b.tophash[i] == empty && inserti == nil {
inserti = &b.tophash[i]
insertk = add(unsafe.Pointer(b), dataOffset+i*uintptr(t.keysize))
insertv = add(unsafe.Pointer(b), dataOffset+bucketCnt*uintptr(t.keysize)+i*uintptr(t.valuesize))
}
continue
}
k := add(unsafe.Pointer(b), dataOffset+i*uintptr(t.keysize))
k2 := k
if t.indirectkey {
k2 = *((*unsafe.Pointer)(k2))
}
if !alg.equal(key, k2) {
continue
}
// already have a mapping for key. Update it.
if t.needkeyupdate {
typedmemmove(t.key, k2, key)
}
v := add(unsafe.Pointer(b), dataOffset+bucketCnt*uintptr(t.keysize)+i*uintptr(t.valuesize))
v2 := v
if t.indirectvalue {
v2 = *((*unsafe.Pointer)(v2))
}
typedmemmove(t.elem, v2, val)
goto done
}
ovf := b.overflow(t)
if ovf == nil {
break
}
b = ovf
}
// did not find mapping for key. Allocate new cell & add entry.
if float32(h.count) >= loadFactor*float32((uintptr(1)<<h.B)) && h.count >= bucketCnt {
hashGrow(t, h)
goto again // Growing the table invalidates everything, so try again
}
if inserti == nil {
// all current buckets are full, allocate a new one.
newb := (*bmap)(newobject(t.bucket))
h.setoverflow(t, b, newb)
inserti = &newb.tophash[0]
insertk = add(unsafe.Pointer(newb), dataOffset)
insertv = add(insertk, bucketCnt*uintptr(t.keysize))
}
// store new key/value at insert position
if t.indirectkey {
kmem := newobject(t.key)
*(*unsafe.Pointer)(insertk) = kmem
insertk = kmem
}
if t.indirectvalue {
vmem := newobject(t.elem)
*(*unsafe.Pointer)(insertv) = vmem
insertv = vmem
}
typedmemmove(t.key, insertk, key)
typedmemmove(t.elem, insertv, val)
*inserti = top
h.count++
done:
if h.flags&hashWriting == 0 {
throw("concurrent map writes")
}
h.flags &^= hashWriting
}
func mapdelete(t *maptype, h *hmap, key unsafe.Pointer) {
if raceenabled && h != nil {
callerpc := getcallerpc(unsafe.Pointer(&t))
pc := funcPC(mapdelete)
racewritepc(unsafe.Pointer(h), callerpc, pc)
raceReadObjectPC(t.key, key, callerpc, pc)
}
if msanenabled && h != nil {
msanread(key, t.key.size)
}
if h == nil || h.count == 0 {
return
}
if h.flags&hashWriting != 0 {
throw("concurrent map writes")
}
h.flags |= hashWriting
alg := t.key.alg
hash := alg.hash(key, uintptr(h.hash0))
bucket := hash & (uintptr(1)<<h.B - 1)
if h.oldbuckets != nil {
growWork(t, h, bucket)
}
b := (*bmap)(unsafe.Pointer(uintptr(h.buckets) + bucket*uintptr(t.bucketsize)))
top := uint8(hash >> (sys.PtrSize*8 - 8))
if top < minTopHash {
top += minTopHash
}
for {
for i := uintptr(0); i < bucketCnt; i++ {
if b.tophash[i] != top {
continue
}
k := add(unsafe.Pointer(b), dataOffset+i*uintptr(t.keysize))
k2 := k
if t.indirectkey {
k2 = *((*unsafe.Pointer)(k2))
}
if !alg.equal(key, k2) {
continue
}
memclr(k, uintptr(t.keysize))
v := unsafe.Pointer(uintptr(unsafe.Pointer(b)) + dataOffset + bucketCnt*uintptr(t.keysize) + i*uintptr(t.valuesize))
memclr(v, uintptr(t.valuesize))
b.tophash[i] = empty
h.count--
goto done
}
b = b.overflow(t)
if b == nil {
goto done
}
}
done:
if h.flags&hashWriting == 0 {
throw("concurrent map writes")
}
h.flags &^= hashWriting
}
func mapiterinit(t *maptype, h *hmap, it *hiter) {
// Clear pointer fields so garbage collector does not complain.
it.key = nil
it.value = nil
it.t = nil
it.h = nil
it.buckets = nil
it.bptr = nil
it.overflow[0] = nil
it.overflow[1] = nil
if raceenabled && h != nil {
callerpc := getcallerpc(unsafe.Pointer(&t))
racereadpc(unsafe.Pointer(h), callerpc, funcPC(mapiterinit))
}
if h == nil || h.count == 0 {
it.key = nil
it.value = nil
return
}
if unsafe.Sizeof(hiter{})/sys.PtrSize != 12 {
throw("hash_iter size incorrect") // see ../../cmd/internal/gc/reflect.go
}
it.t = t
it.h = h
// grab snapshot of bucket state
it.B = h.B
it.buckets = h.buckets
if t.bucket.kind&kindNoPointers != 0 {
// Allocate the current slice and remember pointers to both current and old.
// This preserves all relevant overflow buckets alive even if
// the table grows and/or overflow buckets are added to the table
// while we are iterating.
h.createOverflow()
it.overflow = *h.overflow
}
// decide where to start
r := uintptr(fastrand1())
if h.B > 31-bucketCntBits {
r += uintptr(fastrand1()) << 31
}
it.startBucket = r & (uintptr(1)<<h.B - 1)
it.offset = uint8(r >> h.B & (bucketCnt - 1))
// iterator state
it.bucket = it.startBucket
it.wrapped = false
it.bptr = nil
// Remember we have an iterator.
// Can run concurrently with another hash_iter_init().
if old := h.flags; old&(iterator|oldIterator) != iterator|oldIterator {
atomic.Or8(&h.flags, iterator|oldIterator)
}
mapiternext(it)
}
func mapiternext(it *hiter) {
h := it.h
if raceenabled {
callerpc := getcallerpc(unsafe.Pointer(&it))
racereadpc(unsafe.Pointer(h), callerpc, funcPC(mapiternext))
}
t := it.t
bucket := it.bucket
b := it.bptr
i := it.i
checkBucket := it.checkBucket
alg := t.key.alg
next:
if b == nil {
if bucket == it.startBucket && it.wrapped {
// end of iteration
it.key = nil
it.value = nil
return
}
if h.oldbuckets != nil && it.B == h.B {
// Iterator was started in the middle of a grow, and the grow isn't done yet.
// If the bucket we're looking at hasn't been filled in yet (i.e. the old
// bucket hasn't been evacuated) then we need to iterate through the old
// bucket and only return the ones that will be migrated to this bucket.
oldbucket := bucket & (uintptr(1)<<(it.B-1) - 1)
b = (*bmap)(add(h.oldbuckets, oldbucket*uintptr(t.bucketsize)))
if !evacuated(b) {
checkBucket = bucket
} else {
b = (*bmap)(add(it.buckets, bucket*uintptr(t.bucketsize)))
checkBucket = noCheck
}
} else {
b = (*bmap)(add(it.buckets, bucket*uintptr(t.bucketsize)))
checkBucket = noCheck
}
bucket++
if bucket == uintptr(1)<<it.B {
bucket = 0
it.wrapped = true
}
i = 0
}
for ; i < bucketCnt; i++ {
offi := (i + it.offset) & (bucketCnt - 1)
k := add(unsafe.Pointer(b), dataOffset+uintptr(offi)*uintptr(t.keysize))
v := add(unsafe.Pointer(b), dataOffset+bucketCnt*uintptr(t.keysize)+uintptr(offi)*uintptr(t.valuesize))
if b.tophash[offi] != empty && b.tophash[offi] != evacuatedEmpty {
if checkBucket != noCheck {
// Special case: iterator was started during a grow and the
// grow is not done yet. We're working on a bucket whose
// oldbucket has not been evacuated yet. Or at least, it wasn't
// evacuated when we started the bucket. So we're iterating
// through the oldbucket, skipping any keys that will go
// to the other new bucket (each oldbucket expands to two
// buckets during a grow).
k2 := k
if t.indirectkey {
k2 = *((*unsafe.Pointer)(k2))
}
if t.reflexivekey || alg.equal(k2, k2) {
// If the item in the oldbucket is not destined for
// the current new bucket in the iteration, skip it.
hash := alg.hash(k2, uintptr(h.hash0))
if hash&(uintptr(1)<<it.B-1) != checkBucket {
continue
}
} else {
// Hash isn't repeatable if k != k (NaNs). We need a
// repeatable and randomish choice of which direction
// to send NaNs during evacuation. We'll use the low
// bit of tophash to decide which way NaNs go.
// NOTE: this case is why we need two evacuate tophash
// values, evacuatedX and evacuatedY, that differ in
// their low bit.
if checkBucket>>(it.B-1) != uintptr(b.tophash[offi]&1) {
continue
}
}
}
if b.tophash[offi] != evacuatedX && b.tophash[offi] != evacuatedY {
// this is the golden data, we can return it.
if t.indirectkey {
k = *((*unsafe.Pointer)(k))
}
it.key = k
if t.indirectvalue {
v = *((*unsafe.Pointer)(v))
}
it.value = v
} else {
// The hash table has grown since the iterator was started.
// The golden data for this key is now somewhere else.
k2 := k
if t.indirectkey {
k2 = *((*unsafe.Pointer)(k2))
}
if t.reflexivekey || alg.equal(k2, k2) {
// Check the current hash table for the data.
// This code handles the case where the key
// has been deleted, updated, or deleted and reinserted.
// NOTE: we need to regrab the key as it has potentially been
// updated to an equal() but not identical key (e.g. +0.0 vs -0.0).
rk, rv := mapaccessK(t, h, k2)
if rk == nil {
continue // key has been deleted
}
it.key = rk
it.value = rv
} else {
// if key!=key then the entry can't be deleted or
// updated, so we can just return it. That's lucky for
// us because when key!=key we can't look it up
// successfully in the current table.
it.key = k2
if t.indirectvalue {
v = *((*unsafe.Pointer)(v))
}
it.value = v
}
}
it.bucket = bucket
it.bptr = b
it.i = i + 1
it.checkBucket = checkBucket
return
}
}
b = b.overflow(t)
i = 0
goto next
}
func hashGrow(t *maptype, h *hmap) {
if h.oldbuckets != nil {
throw("evacuation not done in time")
}
oldbuckets := h.buckets
newbuckets := newarray(t.bucket, uintptr(1)<<(h.B+1))
flags := h.flags &^ (iterator | oldIterator)
if h.flags&iterator != 0 {
flags |= oldIterator
}
// commit the grow (atomic wrt gc)
h.B++
h.flags = flags
h.oldbuckets = oldbuckets
h.buckets = newbuckets
h.nevacuate = 0
if h.overflow != nil {
// Promote current overflow buckets to the old generation.
if h.overflow[1] != nil {
throw("overflow is not nil")
}
h.overflow[1] = h.overflow[0]
h.overflow[0] = nil
}
// the actual copying of the hash table data is done incrementally
// by growWork() and evacuate().
}
func growWork(t *maptype, h *hmap, bucket uintptr) {
noldbuckets := uintptr(1) << (h.B - 1)
// make sure we evacuate the oldbucket corresponding
// to the bucket we're about to use
evacuate(t, h, bucket&(noldbuckets-1))
// evacuate one more oldbucket to make progress on growing
if h.oldbuckets != nil {
evacuate(t, h, h.nevacuate)
}
}
func evacuate(t *maptype, h *hmap, oldbucket uintptr) {
b := (*bmap)(add(h.oldbuckets, oldbucket*uintptr(t.bucketsize)))
newbit := uintptr(1) << (h.B - 1)
alg := t.key.alg
if !evacuated(b) {
// TODO: reuse overflow buckets instead of using new ones, if there
// is no iterator using the old buckets. (If !oldIterator.)
x := (*bmap)(add(h.buckets, oldbucket*uintptr(t.bucketsize)))
y := (*bmap)(add(h.buckets, (oldbucket+newbit)*uintptr(t.bucketsize)))
xi := 0
yi := 0
xk := add(unsafe.Pointer(x), dataOffset)
yk := add(unsafe.Pointer(y), dataOffset)
xv := add(xk, bucketCnt*uintptr(t.keysize))
yv := add(yk, bucketCnt*uintptr(t.keysize))
for ; b != nil; b = b.overflow(t) {
k := add(unsafe.Pointer(b), dataOffset)
v := add(k, bucketCnt*uintptr(t.keysize))
for i := 0; i < bucketCnt; i, k, v = i+1, add(k, uintptr(t.keysize)), add(v, uintptr(t.valuesize)) {
top := b.tophash[i]
if top == empty {
b.tophash[i] = evacuatedEmpty
continue
}
if top < minTopHash {
throw("bad map state")
}
k2 := k
if t.indirectkey {
k2 = *((*unsafe.Pointer)(k2))
}
// Compute hash to make our evacuation decision (whether we need
// to send this key/value to bucket x or bucket y).
hash := alg.hash(k2, uintptr(h.hash0))
if h.flags&iterator != 0 {
if !t.reflexivekey && !alg.equal(k2, k2) {
// If key != key (NaNs), then the hash could be (and probably
// will be) entirely different from the old hash. Moreover,
// it isn't reproducible. Reproducibility is required in the
// presence of iterators, as our evacuation decision must
// match whatever decision the iterator made.
// Fortunately, we have the freedom to send these keys either
// way. Also, tophash is meaningless for these kinds of keys.
// We let the low bit of tophash drive the evacuation decision.
// We recompute a new random tophash for the next level so
// these keys will get evenly distributed across all buckets
// after multiple grows.
if (top & 1) != 0 {
hash |= newbit
} else {
hash &^= newbit
}
top = uint8(hash >> (sys.PtrSize*8 - 8))
if top < minTopHash {
top += minTopHash
}
}
}
if (hash & newbit) == 0 {
b.tophash[i] = evacuatedX
if xi == bucketCnt {
newx := (*bmap)(newobject(t.bucket))
h.setoverflow(t, x, newx)
x = newx
xi = 0
xk = add(unsafe.Pointer(x), dataOffset)
xv = add(xk, bucketCnt*uintptr(t.keysize))
}
x.tophash[xi] = top
if t.indirectkey {
*(*unsafe.Pointer)(xk) = k2 // copy pointer
} else {
typedmemmove(t.key, xk, k) // copy value
}
if t.indirectvalue {
*(*unsafe.Pointer)(xv) = *(*unsafe.Pointer)(v)
} else {
typedmemmove(t.elem, xv, v)
}
xi++
xk = add(xk, uintptr(t.keysize))
xv = add(xv, uintptr(t.valuesize))
} else {
b.tophash[i] = evacuatedY
if yi == bucketCnt {
newy := (*bmap)(newobject(t.bucket))
h.setoverflow(t, y, newy)
y = newy
yi = 0
yk = add(unsafe.Pointer(y), dataOffset)
yv = add(yk, bucketCnt*uintptr(t.keysize))
}
y.tophash[yi] = top
if t.indirectkey {
*(*unsafe.Pointer)(yk) = k2
} else {
typedmemmove(t.key, yk, k)
}
if t.indirectvalue {
*(*unsafe.Pointer)(yv) = *(*unsafe.Pointer)(v)
} else {
typedmemmove(t.elem, yv, v)
}
yi++
yk = add(yk, uintptr(t.keysize))
yv = add(yv, uintptr(t.valuesize))
}
}
}
// Unlink the overflow buckets & clear key/value to help GC.
if h.flags&oldIterator == 0 {
b = (*bmap)(add(h.oldbuckets, oldbucket*uintptr(t.bucketsize)))
memclr(add(unsafe.Pointer(b), dataOffset), uintptr(t.bucketsize)-dataOffset)
}
}
// Advance evacuation mark
if oldbucket == h.nevacuate {
h.nevacuate = oldbucket + 1
if oldbucket+1 == newbit { // newbit == # of oldbuckets
// Growing is all done. Free old main bucket array.
h.oldbuckets = nil
// Can discard old overflow buckets as well.
// If they are still referenced by an iterator,
// then the iterator holds a pointers to the slice.
if h.overflow != nil {
h.overflow[1] = nil
}
}
}
}
func ismapkey(t *_type) bool {
return t.alg.hash != nil
}
// Reflect stubs. Called from ../reflect/asm_*.s
//go:linkname reflect_makemap reflect.makemap
func reflect_makemap(t *maptype) *hmap {
return makemap(t, 0, nil, nil)
}
//go:linkname reflect_mapaccess reflect.mapaccess
func reflect_mapaccess(t *maptype, h *hmap, key unsafe.Pointer) unsafe.Pointer {
val, ok := mapaccess2(t, h, key)
if !ok {
// reflect wants nil for a missing element
val = nil
}
return val
}
//go:linkname reflect_mapassign reflect.mapassign
func reflect_mapassign(t *maptype, h *hmap, key unsafe.Pointer, val unsafe.Pointer) {
mapassign1(t, h, key, val)
}
//go:linkname reflect_mapdelete reflect.mapdelete
func reflect_mapdelete(t *maptype, h *hmap, key unsafe.Pointer) {
mapdelete(t, h, key)
}
//go:linkname reflect_mapiterinit reflect.mapiterinit
func reflect_mapiterinit(t *maptype, h *hmap) *hiter {
it := new(hiter)
mapiterinit(t, h, it)
return it
}
//go:linkname reflect_mapiternext reflect.mapiternext
func reflect_mapiternext(it *hiter) {
mapiternext(it)
}
//go:linkname reflect_mapiterkey reflect.mapiterkey
func reflect_mapiterkey(it *hiter) unsafe.Pointer {
return it.key
}
//go:linkname reflect_maplen reflect.maplen
func reflect_maplen(h *hmap) int {
if h == nil {
return 0
}
if raceenabled {
callerpc := getcallerpc(unsafe.Pointer(&h))
racereadpc(unsafe.Pointer(h), callerpc, funcPC(reflect_maplen))
}
return h.count
}
//go:linkname reflect_ismapkey reflect.ismapkey
func reflect_ismapkey(t *_type) bool {
return ismapkey(t)
}
var zerolock mutex
const initialZeroSize = 1024
var zeroinitial [initialZeroSize]byte
// All accesses to zeroptr and zerosize must be atomic so that they
// can be accessed without locks in the common case.
var zeroptr unsafe.Pointer = unsafe.Pointer(&zeroinitial)
var zerosize uintptr = initialZeroSize
// mapzero ensures that zeroptr points to a buffer large enough to
// serve as the zero value for t.
func mapzero(t *_type) {
// Is the type small enough for existing buffer?
cursize := uintptr(atomic.Loadp(unsafe.Pointer(&zerosize)))
if t.size <= cursize {
return
}
// Allocate a new buffer.
lock(&zerolock)
cursize = uintptr(atomic.Loadp(unsafe.Pointer(&zerosize)))
if cursize < t.size {
for cursize < t.size {
cursize *= 2
if cursize == 0 {
// need >2GB zero on 32-bit machine
throw("map element too large")
}
}
atomic.Storep1(unsafe.Pointer(&zeroptr), persistentalloc(cursize, 64, &memstats.other_sys))
atomic.Storep1(unsafe.Pointer(&zerosize), unsafe.Pointer(zerosize))
}
unlock(&zerolock)
}