| // Copyright 2016 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| package amd64 |
| |
| import ( |
| "fmt" |
| "internal/buildcfg" |
| "math" |
| |
| "cmd/compile/internal/base" |
| "cmd/compile/internal/ir" |
| "cmd/compile/internal/logopt" |
| "cmd/compile/internal/objw" |
| "cmd/compile/internal/ssa" |
| "cmd/compile/internal/ssagen" |
| "cmd/compile/internal/types" |
| "cmd/internal/obj" |
| "cmd/internal/obj/x86" |
| ) |
| |
| // ssaMarkMoves marks any MOVXconst ops that need to avoid clobbering flags. |
| func ssaMarkMoves(s *ssagen.State, b *ssa.Block) { |
| flive := b.FlagsLiveAtEnd |
| for _, c := range b.ControlValues() { |
| flive = c.Type.IsFlags() || flive |
| } |
| for i := len(b.Values) - 1; i >= 0; i-- { |
| v := b.Values[i] |
| if flive && (v.Op == ssa.OpAMD64MOVLconst || v.Op == ssa.OpAMD64MOVQconst) { |
| // The "mark" is any non-nil Aux value. |
| v.Aux = ssa.AuxMark |
| } |
| if v.Type.IsFlags() { |
| flive = false |
| } |
| for _, a := range v.Args { |
| if a.Type.IsFlags() { |
| flive = true |
| } |
| } |
| } |
| } |
| |
| // loadByType returns the load instruction of the given type. |
| func loadByType(t *types.Type) obj.As { |
| // Avoid partial register write |
| if !t.IsFloat() { |
| switch t.Size() { |
| case 1: |
| return x86.AMOVBLZX |
| case 2: |
| return x86.AMOVWLZX |
| } |
| } |
| // Otherwise, there's no difference between load and store opcodes. |
| return storeByType(t) |
| } |
| |
| // storeByType returns the store instruction of the given type. |
| func storeByType(t *types.Type) obj.As { |
| width := t.Size() |
| if t.IsFloat() { |
| switch width { |
| case 4: |
| return x86.AMOVSS |
| case 8: |
| return x86.AMOVSD |
| } |
| } else { |
| switch width { |
| case 1: |
| return x86.AMOVB |
| case 2: |
| return x86.AMOVW |
| case 4: |
| return x86.AMOVL |
| case 8: |
| return x86.AMOVQ |
| case 16: |
| return x86.AMOVUPS |
| } |
| } |
| panic(fmt.Sprintf("bad store type %v", t)) |
| } |
| |
| // moveByType returns the reg->reg move instruction of the given type. |
| func moveByType(t *types.Type) obj.As { |
| if t.IsFloat() { |
| // Moving the whole sse2 register is faster |
| // than moving just the correct low portion of it. |
| // There is no xmm->xmm move with 1 byte opcode, |
| // so use movups, which has 2 byte opcode. |
| return x86.AMOVUPS |
| } else { |
| switch t.Size() { |
| case 1: |
| // Avoids partial register write |
| return x86.AMOVL |
| case 2: |
| return x86.AMOVL |
| case 4: |
| return x86.AMOVL |
| case 8: |
| return x86.AMOVQ |
| case 16: |
| return x86.AMOVUPS // int128s are in SSE registers |
| default: |
| panic(fmt.Sprintf("bad int register width %d:%v", t.Size(), t)) |
| } |
| } |
| } |
| |
| // opregreg emits instructions for |
| // |
| // dest := dest(To) op src(From) |
| // |
| // and also returns the created obj.Prog so it |
| // may be further adjusted (offset, scale, etc). |
| func opregreg(s *ssagen.State, op obj.As, dest, src int16) *obj.Prog { |
| p := s.Prog(op) |
| p.From.Type = obj.TYPE_REG |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = dest |
| p.From.Reg = src |
| return p |
| } |
| |
| // memIdx fills out a as an indexed memory reference for v. |
| // It assumes that the base register and the index register |
| // are v.Args[0].Reg() and v.Args[1].Reg(), respectively. |
| // The caller must still use gc.AddAux/gc.AddAux2 to handle v.Aux as necessary. |
| func memIdx(a *obj.Addr, v *ssa.Value) { |
| r, i := v.Args[0].Reg(), v.Args[1].Reg() |
| a.Type = obj.TYPE_MEM |
| a.Scale = v.Op.Scale() |
| if a.Scale == 1 && i == x86.REG_SP { |
| r, i = i, r |
| } |
| a.Reg = r |
| a.Index = i |
| } |
| |
| // DUFFZERO consists of repeated blocks of 4 MOVUPSs + LEAQ, |
| // See runtime/mkduff.go. |
| func duffStart(size int64) int64 { |
| x, _ := duff(size) |
| return x |
| } |
| func duffAdj(size int64) int64 { |
| _, x := duff(size) |
| return x |
| } |
| |
| // duff returns the offset (from duffzero, in bytes) and pointer adjust (in bytes) |
| // required to use the duffzero mechanism for a block of the given size. |
| func duff(size int64) (int64, int64) { |
| if size < 32 || size > 1024 || size%dzClearStep != 0 { |
| panic("bad duffzero size") |
| } |
| steps := size / dzClearStep |
| blocks := steps / dzBlockLen |
| steps %= dzBlockLen |
| off := dzBlockSize * (dzBlocks - blocks) |
| var adj int64 |
| if steps != 0 { |
| off -= dzLeaqSize |
| off -= dzMovSize * steps |
| adj -= dzClearStep * (dzBlockLen - steps) |
| } |
| return off, adj |
| } |
| |
| func getgFromTLS(s *ssagen.State, r int16) { |
| // See the comments in cmd/internal/obj/x86/obj6.go |
| // near CanUse1InsnTLS for a detailed explanation of these instructions. |
| if x86.CanUse1InsnTLS(base.Ctxt) { |
| // MOVQ (TLS), r |
| p := s.Prog(x86.AMOVQ) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = x86.REG_TLS |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| } else { |
| // MOVQ TLS, r |
| // MOVQ (r)(TLS*1), r |
| p := s.Prog(x86.AMOVQ) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = x86.REG_TLS |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| q := s.Prog(x86.AMOVQ) |
| q.From.Type = obj.TYPE_MEM |
| q.From.Reg = r |
| q.From.Index = x86.REG_TLS |
| q.From.Scale = 1 |
| q.To.Type = obj.TYPE_REG |
| q.To.Reg = r |
| } |
| } |
| |
| func ssaGenValue(s *ssagen.State, v *ssa.Value) { |
| switch v.Op { |
| case ssa.OpAMD64VFMADD231SD: |
| p := s.Prog(v.Op.Asm()) |
| p.From = obj.Addr{Type: obj.TYPE_REG, Reg: v.Args[2].Reg()} |
| p.To = obj.Addr{Type: obj.TYPE_REG, Reg: v.Reg()} |
| p.SetFrom3Reg(v.Args[1].Reg()) |
| case ssa.OpAMD64ADDQ, ssa.OpAMD64ADDL: |
| r := v.Reg() |
| r1 := v.Args[0].Reg() |
| r2 := v.Args[1].Reg() |
| switch { |
| case r == r1: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = r2 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| case r == r2: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = r1 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| default: |
| var asm obj.As |
| if v.Op == ssa.OpAMD64ADDQ { |
| asm = x86.ALEAQ |
| } else { |
| asm = x86.ALEAL |
| } |
| p := s.Prog(asm) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = r1 |
| p.From.Scale = 1 |
| p.From.Index = r2 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| } |
| // 2-address opcode arithmetic |
| case ssa.OpAMD64SUBQ, ssa.OpAMD64SUBL, |
| ssa.OpAMD64MULQ, ssa.OpAMD64MULL, |
| ssa.OpAMD64ANDQ, ssa.OpAMD64ANDL, |
| ssa.OpAMD64ORQ, ssa.OpAMD64ORL, |
| ssa.OpAMD64XORQ, ssa.OpAMD64XORL, |
| ssa.OpAMD64SHLQ, ssa.OpAMD64SHLL, |
| ssa.OpAMD64SHRQ, ssa.OpAMD64SHRL, ssa.OpAMD64SHRW, ssa.OpAMD64SHRB, |
| ssa.OpAMD64SARQ, ssa.OpAMD64SARL, ssa.OpAMD64SARW, ssa.OpAMD64SARB, |
| ssa.OpAMD64ROLQ, ssa.OpAMD64ROLL, ssa.OpAMD64ROLW, ssa.OpAMD64ROLB, |
| ssa.OpAMD64RORQ, ssa.OpAMD64RORL, ssa.OpAMD64RORW, ssa.OpAMD64RORB, |
| ssa.OpAMD64ADDSS, ssa.OpAMD64ADDSD, ssa.OpAMD64SUBSS, ssa.OpAMD64SUBSD, |
| ssa.OpAMD64MULSS, ssa.OpAMD64MULSD, ssa.OpAMD64DIVSS, ssa.OpAMD64DIVSD, |
| ssa.OpAMD64PXOR, |
| ssa.OpAMD64BTSL, ssa.OpAMD64BTSQ, |
| ssa.OpAMD64BTCL, ssa.OpAMD64BTCQ, |
| ssa.OpAMD64BTRL, ssa.OpAMD64BTRQ: |
| opregreg(s, v.Op.Asm(), v.Reg(), v.Args[1].Reg()) |
| |
| case ssa.OpAMD64SHRDQ, ssa.OpAMD64SHLDQ: |
| p := s.Prog(v.Op.Asm()) |
| lo, hi, bits := v.Args[0].Reg(), v.Args[1].Reg(), v.Args[2].Reg() |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = bits |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = lo |
| p.SetFrom3Reg(hi) |
| |
| case ssa.OpAMD64BLSIQ, ssa.OpAMD64BLSIL, |
| ssa.OpAMD64BLSMSKQ, ssa.OpAMD64BLSMSKL, |
| ssa.OpAMD64BLSRQ, ssa.OpAMD64BLSRL: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[0].Reg() |
| p.To.Type = obj.TYPE_REG |
| switch v.Op { |
| case ssa.OpAMD64BLSRQ, ssa.OpAMD64BLSRL: |
| p.To.Reg = v.Reg0() |
| default: |
| p.To.Reg = v.Reg() |
| } |
| |
| case ssa.OpAMD64ANDNQ, ssa.OpAMD64ANDNL: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[0].Reg() |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| p.SetFrom3Reg(v.Args[1].Reg()) |
| |
| case ssa.OpAMD64SARXL, ssa.OpAMD64SARXQ, |
| ssa.OpAMD64SHLXL, ssa.OpAMD64SHLXQ, |
| ssa.OpAMD64SHRXL, ssa.OpAMD64SHRXQ: |
| p := opregreg(s, v.Op.Asm(), v.Reg(), v.Args[1].Reg()) |
| p.SetFrom3Reg(v.Args[0].Reg()) |
| |
| case ssa.OpAMD64SHLXLload, ssa.OpAMD64SHLXQload, |
| ssa.OpAMD64SHRXLload, ssa.OpAMD64SHRXQload, |
| ssa.OpAMD64SARXLload, ssa.OpAMD64SARXQload: |
| p := opregreg(s, v.Op.Asm(), v.Reg(), v.Args[1].Reg()) |
| m := obj.Addr{Type: obj.TYPE_MEM, Reg: v.Args[0].Reg()} |
| ssagen.AddAux(&m, v) |
| p.SetFrom3(m) |
| |
| case ssa.OpAMD64SHLXLloadidx1, ssa.OpAMD64SHLXLloadidx4, ssa.OpAMD64SHLXLloadidx8, |
| ssa.OpAMD64SHRXLloadidx1, ssa.OpAMD64SHRXLloadidx4, ssa.OpAMD64SHRXLloadidx8, |
| ssa.OpAMD64SARXLloadidx1, ssa.OpAMD64SARXLloadidx4, ssa.OpAMD64SARXLloadidx8, |
| ssa.OpAMD64SHLXQloadidx1, ssa.OpAMD64SHLXQloadidx8, |
| ssa.OpAMD64SHRXQloadidx1, ssa.OpAMD64SHRXQloadidx8, |
| ssa.OpAMD64SARXQloadidx1, ssa.OpAMD64SARXQloadidx8: |
| p := opregreg(s, v.Op.Asm(), v.Reg(), v.Args[2].Reg()) |
| m := obj.Addr{Type: obj.TYPE_MEM} |
| memIdx(&m, v) |
| ssagen.AddAux(&m, v) |
| p.SetFrom3(m) |
| |
| case ssa.OpAMD64DIVQU, ssa.OpAMD64DIVLU, ssa.OpAMD64DIVWU: |
| // Arg[0] (the dividend) is in AX. |
| // Arg[1] (the divisor) can be in any other register. |
| // Result[0] (the quotient) is in AX. |
| // Result[1] (the remainder) is in DX. |
| r := v.Args[1].Reg() |
| |
| // Zero extend dividend. |
| opregreg(s, x86.AXORL, x86.REG_DX, x86.REG_DX) |
| |
| // Issue divide. |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = r |
| |
| case ssa.OpAMD64DIVQ, ssa.OpAMD64DIVL, ssa.OpAMD64DIVW: |
| // Arg[0] (the dividend) is in AX. |
| // Arg[1] (the divisor) can be in any other register. |
| // Result[0] (the quotient) is in AX. |
| // Result[1] (the remainder) is in DX. |
| r := v.Args[1].Reg() |
| var j1 *obj.Prog |
| |
| // CPU faults upon signed overflow, which occurs when the most |
| // negative int is divided by -1. Handle divide by -1 as a special case. |
| if ssa.DivisionNeedsFixUp(v) { |
| var c *obj.Prog |
| switch v.Op { |
| case ssa.OpAMD64DIVQ: |
| c = s.Prog(x86.ACMPQ) |
| case ssa.OpAMD64DIVL: |
| c = s.Prog(x86.ACMPL) |
| case ssa.OpAMD64DIVW: |
| c = s.Prog(x86.ACMPW) |
| } |
| c.From.Type = obj.TYPE_REG |
| c.From.Reg = r |
| c.To.Type = obj.TYPE_CONST |
| c.To.Offset = -1 |
| j1 = s.Prog(x86.AJEQ) |
| j1.To.Type = obj.TYPE_BRANCH |
| } |
| |
| // Sign extend dividend. |
| switch v.Op { |
| case ssa.OpAMD64DIVQ: |
| s.Prog(x86.ACQO) |
| case ssa.OpAMD64DIVL: |
| s.Prog(x86.ACDQ) |
| case ssa.OpAMD64DIVW: |
| s.Prog(x86.ACWD) |
| } |
| |
| // Issue divide. |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = r |
| |
| if j1 != nil { |
| // Skip over -1 fixup code. |
| j2 := s.Prog(obj.AJMP) |
| j2.To.Type = obj.TYPE_BRANCH |
| |
| // Issue -1 fixup code. |
| // n / -1 = -n |
| var n1 *obj.Prog |
| switch v.Op { |
| case ssa.OpAMD64DIVQ: |
| n1 = s.Prog(x86.ANEGQ) |
| case ssa.OpAMD64DIVL: |
| n1 = s.Prog(x86.ANEGL) |
| case ssa.OpAMD64DIVW: |
| n1 = s.Prog(x86.ANEGW) |
| } |
| n1.To.Type = obj.TYPE_REG |
| n1.To.Reg = x86.REG_AX |
| |
| // n % -1 == 0 |
| opregreg(s, x86.AXORL, x86.REG_DX, x86.REG_DX) |
| |
| // TODO(khr): issue only the -1 fixup code we need. |
| // For instance, if only the quotient is used, no point in zeroing the remainder. |
| |
| j1.To.SetTarget(n1) |
| j2.To.SetTarget(s.Pc()) |
| } |
| |
| case ssa.OpAMD64HMULQ, ssa.OpAMD64HMULL, ssa.OpAMD64HMULQU, ssa.OpAMD64HMULLU: |
| // the frontend rewrites constant division by 8/16/32 bit integers into |
| // HMUL by a constant |
| // SSA rewrites generate the 64 bit versions |
| |
| // Arg[0] is already in AX as it's the only register we allow |
| // and DX is the only output we care about (the high bits) |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[1].Reg() |
| |
| // IMULB puts the high portion in AH instead of DL, |
| // so move it to DL for consistency |
| if v.Type.Size() == 1 { |
| m := s.Prog(x86.AMOVB) |
| m.From.Type = obj.TYPE_REG |
| m.From.Reg = x86.REG_AH |
| m.To.Type = obj.TYPE_REG |
| m.To.Reg = x86.REG_DX |
| } |
| |
| case ssa.OpAMD64MULQU, ssa.OpAMD64MULLU: |
| // Arg[0] is already in AX as it's the only register we allow |
| // results lo in AX |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[1].Reg() |
| |
| case ssa.OpAMD64MULQU2: |
| // Arg[0] is already in AX as it's the only register we allow |
| // results hi in DX, lo in AX |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[1].Reg() |
| |
| case ssa.OpAMD64DIVQU2: |
| // Arg[0], Arg[1] are already in Dx, AX, as they're the only registers we allow |
| // results q in AX, r in DX |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[2].Reg() |
| |
| case ssa.OpAMD64AVGQU: |
| // compute (x+y)/2 unsigned. |
| // Do a 64-bit add, the overflow goes into the carry. |
| // Shift right once and pull the carry back into the 63rd bit. |
| p := s.Prog(x86.AADDQ) |
| p.From.Type = obj.TYPE_REG |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| p.From.Reg = v.Args[1].Reg() |
| p = s.Prog(x86.ARCRQ) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = 1 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64ADDQcarry, ssa.OpAMD64ADCQ: |
| r := v.Reg0() |
| r0 := v.Args[0].Reg() |
| r1 := v.Args[1].Reg() |
| switch r { |
| case r0: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = r1 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| case r1: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = r0 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| default: |
| v.Fatalf("output not in same register as an input %s", v.LongString()) |
| } |
| |
| case ssa.OpAMD64SUBQborrow, ssa.OpAMD64SBBQ: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[1].Reg() |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg0() |
| |
| case ssa.OpAMD64ADDQconstcarry, ssa.OpAMD64ADCQconst, ssa.OpAMD64SUBQconstborrow, ssa.OpAMD64SBBQconst: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = v.AuxInt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg0() |
| |
| case ssa.OpAMD64ADDQconst, ssa.OpAMD64ADDLconst: |
| r := v.Reg() |
| a := v.Args[0].Reg() |
| if r == a { |
| switch v.AuxInt { |
| case 1: |
| var asm obj.As |
| // Software optimization manual recommends add $1,reg. |
| // But inc/dec is 1 byte smaller. ICC always uses inc |
| // Clang/GCC choose depending on flags, but prefer add. |
| // Experiments show that inc/dec is both a little faster |
| // and make a binary a little smaller. |
| if v.Op == ssa.OpAMD64ADDQconst { |
| asm = x86.AINCQ |
| } else { |
| asm = x86.AINCL |
| } |
| p := s.Prog(asm) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| return |
| case -1: |
| var asm obj.As |
| if v.Op == ssa.OpAMD64ADDQconst { |
| asm = x86.ADECQ |
| } else { |
| asm = x86.ADECL |
| } |
| p := s.Prog(asm) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| return |
| case 0x80: |
| // 'SUBQ $-0x80, r' is shorter to encode than |
| // and functionally equivalent to 'ADDQ $0x80, r'. |
| asm := x86.ASUBL |
| if v.Op == ssa.OpAMD64ADDQconst { |
| asm = x86.ASUBQ |
| } |
| p := s.Prog(asm) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = -0x80 |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| return |
| |
| } |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = v.AuxInt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| return |
| } |
| var asm obj.As |
| if v.Op == ssa.OpAMD64ADDQconst { |
| asm = x86.ALEAQ |
| } else { |
| asm = x86.ALEAL |
| } |
| p := s.Prog(asm) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = a |
| p.From.Offset = v.AuxInt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| |
| case ssa.OpAMD64CMOVQEQ, ssa.OpAMD64CMOVLEQ, ssa.OpAMD64CMOVWEQ, |
| ssa.OpAMD64CMOVQLT, ssa.OpAMD64CMOVLLT, ssa.OpAMD64CMOVWLT, |
| ssa.OpAMD64CMOVQNE, ssa.OpAMD64CMOVLNE, ssa.OpAMD64CMOVWNE, |
| ssa.OpAMD64CMOVQGT, ssa.OpAMD64CMOVLGT, ssa.OpAMD64CMOVWGT, |
| ssa.OpAMD64CMOVQLE, ssa.OpAMD64CMOVLLE, ssa.OpAMD64CMOVWLE, |
| ssa.OpAMD64CMOVQGE, ssa.OpAMD64CMOVLGE, ssa.OpAMD64CMOVWGE, |
| ssa.OpAMD64CMOVQHI, ssa.OpAMD64CMOVLHI, ssa.OpAMD64CMOVWHI, |
| ssa.OpAMD64CMOVQLS, ssa.OpAMD64CMOVLLS, ssa.OpAMD64CMOVWLS, |
| ssa.OpAMD64CMOVQCC, ssa.OpAMD64CMOVLCC, ssa.OpAMD64CMOVWCC, |
| ssa.OpAMD64CMOVQCS, ssa.OpAMD64CMOVLCS, ssa.OpAMD64CMOVWCS, |
| ssa.OpAMD64CMOVQGTF, ssa.OpAMD64CMOVLGTF, ssa.OpAMD64CMOVWGTF, |
| ssa.OpAMD64CMOVQGEF, ssa.OpAMD64CMOVLGEF, ssa.OpAMD64CMOVWGEF: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[1].Reg() |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64CMOVQNEF, ssa.OpAMD64CMOVLNEF, ssa.OpAMD64CMOVWNEF: |
| // Flag condition: ^ZERO || PARITY |
| // Generate: |
| // CMOV*NE SRC,DST |
| // CMOV*PS SRC,DST |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[1].Reg() |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| var q *obj.Prog |
| if v.Op == ssa.OpAMD64CMOVQNEF { |
| q = s.Prog(x86.ACMOVQPS) |
| } else if v.Op == ssa.OpAMD64CMOVLNEF { |
| q = s.Prog(x86.ACMOVLPS) |
| } else { |
| q = s.Prog(x86.ACMOVWPS) |
| } |
| q.From.Type = obj.TYPE_REG |
| q.From.Reg = v.Args[1].Reg() |
| q.To.Type = obj.TYPE_REG |
| q.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64CMOVQEQF, ssa.OpAMD64CMOVLEQF, ssa.OpAMD64CMOVWEQF: |
| // Flag condition: ZERO && !PARITY |
| // Generate: |
| // MOV SRC,TMP |
| // CMOV*NE DST,TMP |
| // CMOV*PC TMP,DST |
| // |
| // TODO(rasky): we could generate: |
| // CMOV*NE DST,SRC |
| // CMOV*PC SRC,DST |
| // But this requires a way for regalloc to know that SRC might be |
| // clobbered by this instruction. |
| t := v.RegTmp() |
| opregreg(s, moveByType(v.Type), t, v.Args[1].Reg()) |
| |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Reg() |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = t |
| var q *obj.Prog |
| if v.Op == ssa.OpAMD64CMOVQEQF { |
| q = s.Prog(x86.ACMOVQPC) |
| } else if v.Op == ssa.OpAMD64CMOVLEQF { |
| q = s.Prog(x86.ACMOVLPC) |
| } else { |
| q = s.Prog(x86.ACMOVWPC) |
| } |
| q.From.Type = obj.TYPE_REG |
| q.From.Reg = t |
| q.To.Type = obj.TYPE_REG |
| q.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64MULQconst, ssa.OpAMD64MULLconst: |
| r := v.Reg() |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = v.AuxInt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| p.SetFrom3Reg(v.Args[0].Reg()) |
| |
| case ssa.OpAMD64ANDQconst: |
| asm := v.Op.Asm() |
| // If the constant is positive and fits into 32 bits, use ANDL. |
| // This saves a few bytes of encoding. |
| if 0 <= v.AuxInt && v.AuxInt <= (1<<32-1) { |
| asm = x86.AANDL |
| } |
| p := s.Prog(asm) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = v.AuxInt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64SUBQconst, ssa.OpAMD64SUBLconst, |
| ssa.OpAMD64ANDLconst, |
| ssa.OpAMD64ORQconst, ssa.OpAMD64ORLconst, |
| ssa.OpAMD64XORQconst, ssa.OpAMD64XORLconst, |
| ssa.OpAMD64SHLQconst, ssa.OpAMD64SHLLconst, |
| ssa.OpAMD64SHRQconst, ssa.OpAMD64SHRLconst, ssa.OpAMD64SHRWconst, ssa.OpAMD64SHRBconst, |
| ssa.OpAMD64SARQconst, ssa.OpAMD64SARLconst, ssa.OpAMD64SARWconst, ssa.OpAMD64SARBconst, |
| ssa.OpAMD64ROLQconst, ssa.OpAMD64ROLLconst, ssa.OpAMD64ROLWconst, ssa.OpAMD64ROLBconst: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = v.AuxInt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpAMD64SBBQcarrymask, ssa.OpAMD64SBBLcarrymask: |
| r := v.Reg() |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = r |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = r |
| case ssa.OpAMD64LEAQ1, ssa.OpAMD64LEAQ2, ssa.OpAMD64LEAQ4, ssa.OpAMD64LEAQ8, |
| ssa.OpAMD64LEAL1, ssa.OpAMD64LEAL2, ssa.OpAMD64LEAL4, ssa.OpAMD64LEAL8, |
| ssa.OpAMD64LEAW1, ssa.OpAMD64LEAW2, ssa.OpAMD64LEAW4, ssa.OpAMD64LEAW8: |
| p := s.Prog(v.Op.Asm()) |
| memIdx(&p.From, v) |
| o := v.Reg() |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = o |
| if v.AuxInt != 0 && v.Aux == nil { |
| // Emit an additional LEA to add the displacement instead of creating a slow 3 operand LEA. |
| switch v.Op { |
| case ssa.OpAMD64LEAQ1, ssa.OpAMD64LEAQ2, ssa.OpAMD64LEAQ4, ssa.OpAMD64LEAQ8: |
| p = s.Prog(x86.ALEAQ) |
| case ssa.OpAMD64LEAL1, ssa.OpAMD64LEAL2, ssa.OpAMD64LEAL4, ssa.OpAMD64LEAL8: |
| p = s.Prog(x86.ALEAL) |
| case ssa.OpAMD64LEAW1, ssa.OpAMD64LEAW2, ssa.OpAMD64LEAW4, ssa.OpAMD64LEAW8: |
| p = s.Prog(x86.ALEAW) |
| } |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = o |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = o |
| } |
| ssagen.AddAux(&p.From, v) |
| case ssa.OpAMD64LEAQ, ssa.OpAMD64LEAL, ssa.OpAMD64LEAW: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = v.Args[0].Reg() |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpAMD64CMPQ, ssa.OpAMD64CMPL, ssa.OpAMD64CMPW, ssa.OpAMD64CMPB, |
| ssa.OpAMD64TESTQ, ssa.OpAMD64TESTL, ssa.OpAMD64TESTW, ssa.OpAMD64TESTB, |
| ssa.OpAMD64BTL, ssa.OpAMD64BTQ: |
| opregreg(s, v.Op.Asm(), v.Args[1].Reg(), v.Args[0].Reg()) |
| case ssa.OpAMD64UCOMISS, ssa.OpAMD64UCOMISD: |
| // Go assembler has swapped operands for UCOMISx relative to CMP, |
| // must account for that right here. |
| opregreg(s, v.Op.Asm(), v.Args[0].Reg(), v.Args[1].Reg()) |
| case ssa.OpAMD64CMPQconst, ssa.OpAMD64CMPLconst, ssa.OpAMD64CMPWconst, ssa.OpAMD64CMPBconst: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[0].Reg() |
| p.To.Type = obj.TYPE_CONST |
| p.To.Offset = v.AuxInt |
| case ssa.OpAMD64BTLconst, ssa.OpAMD64BTQconst, |
| ssa.OpAMD64TESTQconst, ssa.OpAMD64TESTLconst, ssa.OpAMD64TESTWconst, ssa.OpAMD64TESTBconst, |
| ssa.OpAMD64BTSLconst, ssa.OpAMD64BTSQconst, |
| ssa.OpAMD64BTCLconst, ssa.OpAMD64BTCQconst, |
| ssa.OpAMD64BTRLconst, ssa.OpAMD64BTRQconst: |
| op := v.Op |
| if op == ssa.OpAMD64BTQconst && v.AuxInt < 32 { |
| // Emit 32-bit version because it's shorter |
| op = ssa.OpAMD64BTLconst |
| } |
| p := s.Prog(op.Asm()) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = v.AuxInt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Args[0].Reg() |
| case ssa.OpAMD64CMPQload, ssa.OpAMD64CMPLload, ssa.OpAMD64CMPWload, ssa.OpAMD64CMPBload: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = v.Args[0].Reg() |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Args[1].Reg() |
| case ssa.OpAMD64CMPQconstload, ssa.OpAMD64CMPLconstload, ssa.OpAMD64CMPWconstload, ssa.OpAMD64CMPBconstload: |
| sc := v.AuxValAndOff() |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = v.Args[0].Reg() |
| ssagen.AddAux2(&p.From, v, sc.Off64()) |
| p.To.Type = obj.TYPE_CONST |
| p.To.Offset = sc.Val64() |
| case ssa.OpAMD64CMPQloadidx8, ssa.OpAMD64CMPQloadidx1, ssa.OpAMD64CMPLloadidx4, ssa.OpAMD64CMPLloadidx1, ssa.OpAMD64CMPWloadidx2, ssa.OpAMD64CMPWloadidx1, ssa.OpAMD64CMPBloadidx1: |
| p := s.Prog(v.Op.Asm()) |
| memIdx(&p.From, v) |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Args[2].Reg() |
| case ssa.OpAMD64CMPQconstloadidx8, ssa.OpAMD64CMPQconstloadidx1, ssa.OpAMD64CMPLconstloadidx4, ssa.OpAMD64CMPLconstloadidx1, ssa.OpAMD64CMPWconstloadidx2, ssa.OpAMD64CMPWconstloadidx1, ssa.OpAMD64CMPBconstloadidx1: |
| sc := v.AuxValAndOff() |
| p := s.Prog(v.Op.Asm()) |
| memIdx(&p.From, v) |
| ssagen.AddAux2(&p.From, v, sc.Off64()) |
| p.To.Type = obj.TYPE_CONST |
| p.To.Offset = sc.Val64() |
| case ssa.OpAMD64MOVLconst, ssa.OpAMD64MOVQconst: |
| x := v.Reg() |
| |
| // If flags aren't live (indicated by v.Aux == nil), |
| // then we can rewrite MOV $0, AX into XOR AX, AX. |
| if v.AuxInt == 0 && v.Aux == nil { |
| opregreg(s, x86.AXORL, x, x) |
| break |
| } |
| |
| asm := v.Op.Asm() |
| // Use MOVL to move a small constant into a register |
| // when the constant is positive and fits into 32 bits. |
| if 0 <= v.AuxInt && v.AuxInt <= (1<<32-1) { |
| // The upper 32bit are zeroed automatically when using MOVL. |
| asm = x86.AMOVL |
| } |
| p := s.Prog(asm) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = v.AuxInt |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = x |
| case ssa.OpAMD64MOVSSconst, ssa.OpAMD64MOVSDconst: |
| x := v.Reg() |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_FCONST |
| p.From.Val = math.Float64frombits(uint64(v.AuxInt)) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = x |
| case ssa.OpAMD64MOVQload, ssa.OpAMD64MOVLload, ssa.OpAMD64MOVWload, ssa.OpAMD64MOVBload, ssa.OpAMD64MOVOload, |
| ssa.OpAMD64MOVSSload, ssa.OpAMD64MOVSDload, ssa.OpAMD64MOVBQSXload, ssa.OpAMD64MOVWQSXload, ssa.OpAMD64MOVLQSXload, |
| ssa.OpAMD64MOVBEQload, ssa.OpAMD64MOVBELload: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = v.Args[0].Reg() |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpAMD64MOVBloadidx1, ssa.OpAMD64MOVWloadidx1, ssa.OpAMD64MOVLloadidx1, ssa.OpAMD64MOVQloadidx1, ssa.OpAMD64MOVSSloadidx1, ssa.OpAMD64MOVSDloadidx1, |
| ssa.OpAMD64MOVQloadidx8, ssa.OpAMD64MOVSDloadidx8, ssa.OpAMD64MOVLloadidx8, ssa.OpAMD64MOVLloadidx4, ssa.OpAMD64MOVSSloadidx4, ssa.OpAMD64MOVWloadidx2, |
| ssa.OpAMD64MOVBELloadidx1, ssa.OpAMD64MOVBELloadidx4, ssa.OpAMD64MOVBELloadidx8, ssa.OpAMD64MOVBEQloadidx1, ssa.OpAMD64MOVBEQloadidx8: |
| p := s.Prog(v.Op.Asm()) |
| memIdx(&p.From, v) |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpAMD64MOVQstore, ssa.OpAMD64MOVSSstore, ssa.OpAMD64MOVSDstore, ssa.OpAMD64MOVLstore, ssa.OpAMD64MOVWstore, ssa.OpAMD64MOVBstore, ssa.OpAMD64MOVOstore, |
| ssa.OpAMD64ADDQmodify, ssa.OpAMD64SUBQmodify, ssa.OpAMD64ANDQmodify, ssa.OpAMD64ORQmodify, ssa.OpAMD64XORQmodify, |
| ssa.OpAMD64ADDLmodify, ssa.OpAMD64SUBLmodify, ssa.OpAMD64ANDLmodify, ssa.OpAMD64ORLmodify, ssa.OpAMD64XORLmodify, |
| ssa.OpAMD64MOVBEQstore, ssa.OpAMD64MOVBELstore, ssa.OpAMD64MOVBEWstore: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[1].Reg() |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| ssagen.AddAux(&p.To, v) |
| case ssa.OpAMD64MOVBstoreidx1, ssa.OpAMD64MOVWstoreidx1, ssa.OpAMD64MOVLstoreidx1, ssa.OpAMD64MOVQstoreidx1, ssa.OpAMD64MOVSSstoreidx1, ssa.OpAMD64MOVSDstoreidx1, |
| ssa.OpAMD64MOVQstoreidx8, ssa.OpAMD64MOVSDstoreidx8, ssa.OpAMD64MOVLstoreidx8, ssa.OpAMD64MOVSSstoreidx4, ssa.OpAMD64MOVLstoreidx4, ssa.OpAMD64MOVWstoreidx2, |
| ssa.OpAMD64ADDLmodifyidx1, ssa.OpAMD64ADDLmodifyidx4, ssa.OpAMD64ADDLmodifyidx8, ssa.OpAMD64ADDQmodifyidx1, ssa.OpAMD64ADDQmodifyidx8, |
| ssa.OpAMD64SUBLmodifyidx1, ssa.OpAMD64SUBLmodifyidx4, ssa.OpAMD64SUBLmodifyidx8, ssa.OpAMD64SUBQmodifyidx1, ssa.OpAMD64SUBQmodifyidx8, |
| ssa.OpAMD64ANDLmodifyidx1, ssa.OpAMD64ANDLmodifyidx4, ssa.OpAMD64ANDLmodifyidx8, ssa.OpAMD64ANDQmodifyidx1, ssa.OpAMD64ANDQmodifyidx8, |
| ssa.OpAMD64ORLmodifyidx1, ssa.OpAMD64ORLmodifyidx4, ssa.OpAMD64ORLmodifyidx8, ssa.OpAMD64ORQmodifyidx1, ssa.OpAMD64ORQmodifyidx8, |
| ssa.OpAMD64XORLmodifyidx1, ssa.OpAMD64XORLmodifyidx4, ssa.OpAMD64XORLmodifyidx8, ssa.OpAMD64XORQmodifyidx1, ssa.OpAMD64XORQmodifyidx8, |
| ssa.OpAMD64MOVBEWstoreidx1, ssa.OpAMD64MOVBEWstoreidx2, ssa.OpAMD64MOVBELstoreidx1, ssa.OpAMD64MOVBELstoreidx4, ssa.OpAMD64MOVBELstoreidx8, ssa.OpAMD64MOVBEQstoreidx1, ssa.OpAMD64MOVBEQstoreidx8: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[2].Reg() |
| memIdx(&p.To, v) |
| ssagen.AddAux(&p.To, v) |
| case ssa.OpAMD64ADDQconstmodify, ssa.OpAMD64ADDLconstmodify: |
| sc := v.AuxValAndOff() |
| off := sc.Off64() |
| val := sc.Val() |
| if val == 1 || val == -1 { |
| var asm obj.As |
| if v.Op == ssa.OpAMD64ADDQconstmodify { |
| if val == 1 { |
| asm = x86.AINCQ |
| } else { |
| asm = x86.ADECQ |
| } |
| } else { |
| if val == 1 { |
| asm = x86.AINCL |
| } else { |
| asm = x86.ADECL |
| } |
| } |
| p := s.Prog(asm) |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| ssagen.AddAux2(&p.To, v, off) |
| break |
| } |
| fallthrough |
| case ssa.OpAMD64ANDQconstmodify, ssa.OpAMD64ANDLconstmodify, ssa.OpAMD64ORQconstmodify, ssa.OpAMD64ORLconstmodify, |
| ssa.OpAMD64XORQconstmodify, ssa.OpAMD64XORLconstmodify: |
| sc := v.AuxValAndOff() |
| off := sc.Off64() |
| val := sc.Val64() |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = val |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| ssagen.AddAux2(&p.To, v, off) |
| |
| case ssa.OpAMD64MOVQstoreconst, ssa.OpAMD64MOVLstoreconst, ssa.OpAMD64MOVWstoreconst, ssa.OpAMD64MOVBstoreconst: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_CONST |
| sc := v.AuxValAndOff() |
| p.From.Offset = sc.Val64() |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| ssagen.AddAux2(&p.To, v, sc.Off64()) |
| case ssa.OpAMD64MOVOstoreconst: |
| sc := v.AuxValAndOff() |
| if sc.Val() != 0 { |
| v.Fatalf("MOVO for non zero constants not implemented: %s", v.LongString()) |
| } |
| |
| if s.ABI != obj.ABIInternal { |
| // zero X15 manually |
| opregreg(s, x86.AXORPS, x86.REG_X15, x86.REG_X15) |
| } |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = x86.REG_X15 |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| ssagen.AddAux2(&p.To, v, sc.Off64()) |
| |
| case ssa.OpAMD64MOVQstoreconstidx1, ssa.OpAMD64MOVQstoreconstidx8, ssa.OpAMD64MOVLstoreconstidx1, ssa.OpAMD64MOVLstoreconstidx4, ssa.OpAMD64MOVWstoreconstidx1, ssa.OpAMD64MOVWstoreconstidx2, ssa.OpAMD64MOVBstoreconstidx1, |
| ssa.OpAMD64ADDLconstmodifyidx1, ssa.OpAMD64ADDLconstmodifyidx4, ssa.OpAMD64ADDLconstmodifyidx8, ssa.OpAMD64ADDQconstmodifyidx1, ssa.OpAMD64ADDQconstmodifyidx8, |
| ssa.OpAMD64ANDLconstmodifyidx1, ssa.OpAMD64ANDLconstmodifyidx4, ssa.OpAMD64ANDLconstmodifyidx8, ssa.OpAMD64ANDQconstmodifyidx1, ssa.OpAMD64ANDQconstmodifyidx8, |
| ssa.OpAMD64ORLconstmodifyidx1, ssa.OpAMD64ORLconstmodifyidx4, ssa.OpAMD64ORLconstmodifyidx8, ssa.OpAMD64ORQconstmodifyidx1, ssa.OpAMD64ORQconstmodifyidx8, |
| ssa.OpAMD64XORLconstmodifyidx1, ssa.OpAMD64XORLconstmodifyidx4, ssa.OpAMD64XORLconstmodifyidx8, ssa.OpAMD64XORQconstmodifyidx1, ssa.OpAMD64XORQconstmodifyidx8: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_CONST |
| sc := v.AuxValAndOff() |
| p.From.Offset = sc.Val64() |
| switch { |
| case p.As == x86.AADDQ && p.From.Offset == 1: |
| p.As = x86.AINCQ |
| p.From.Type = obj.TYPE_NONE |
| case p.As == x86.AADDQ && p.From.Offset == -1: |
| p.As = x86.ADECQ |
| p.From.Type = obj.TYPE_NONE |
| case p.As == x86.AADDL && p.From.Offset == 1: |
| p.As = x86.AINCL |
| p.From.Type = obj.TYPE_NONE |
| case p.As == x86.AADDL && p.From.Offset == -1: |
| p.As = x86.ADECL |
| p.From.Type = obj.TYPE_NONE |
| } |
| memIdx(&p.To, v) |
| ssagen.AddAux2(&p.To, v, sc.Off64()) |
| case ssa.OpAMD64MOVLQSX, ssa.OpAMD64MOVWQSX, ssa.OpAMD64MOVBQSX, ssa.OpAMD64MOVLQZX, ssa.OpAMD64MOVWQZX, ssa.OpAMD64MOVBQZX, |
| ssa.OpAMD64CVTTSS2SL, ssa.OpAMD64CVTTSD2SL, ssa.OpAMD64CVTTSS2SQ, ssa.OpAMD64CVTTSD2SQ, |
| ssa.OpAMD64CVTSS2SD, ssa.OpAMD64CVTSD2SS: |
| opregreg(s, v.Op.Asm(), v.Reg(), v.Args[0].Reg()) |
| case ssa.OpAMD64CVTSL2SD, ssa.OpAMD64CVTSQ2SD, ssa.OpAMD64CVTSQ2SS, ssa.OpAMD64CVTSL2SS: |
| r := v.Reg() |
| // Break false dependency on destination register. |
| opregreg(s, x86.AXORPS, r, r) |
| opregreg(s, v.Op.Asm(), r, v.Args[0].Reg()) |
| case ssa.OpAMD64MOVQi2f, ssa.OpAMD64MOVQf2i, ssa.OpAMD64MOVLi2f, ssa.OpAMD64MOVLf2i: |
| var p *obj.Prog |
| switch v.Op { |
| case ssa.OpAMD64MOVQi2f, ssa.OpAMD64MOVQf2i: |
| p = s.Prog(x86.AMOVQ) |
| case ssa.OpAMD64MOVLi2f, ssa.OpAMD64MOVLf2i: |
| p = s.Prog(x86.AMOVL) |
| } |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[0].Reg() |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpAMD64ADDQload, ssa.OpAMD64ADDLload, ssa.OpAMD64SUBQload, ssa.OpAMD64SUBLload, |
| ssa.OpAMD64ANDQload, ssa.OpAMD64ANDLload, ssa.OpAMD64ORQload, ssa.OpAMD64ORLload, |
| ssa.OpAMD64XORQload, ssa.OpAMD64XORLload, ssa.OpAMD64ADDSDload, ssa.OpAMD64ADDSSload, |
| ssa.OpAMD64SUBSDload, ssa.OpAMD64SUBSSload, ssa.OpAMD64MULSDload, ssa.OpAMD64MULSSload, |
| ssa.OpAMD64DIVSDload, ssa.OpAMD64DIVSSload: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = v.Args[1].Reg() |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpAMD64ADDLloadidx1, ssa.OpAMD64ADDLloadidx4, ssa.OpAMD64ADDLloadidx8, ssa.OpAMD64ADDQloadidx1, ssa.OpAMD64ADDQloadidx8, |
| ssa.OpAMD64SUBLloadidx1, ssa.OpAMD64SUBLloadidx4, ssa.OpAMD64SUBLloadidx8, ssa.OpAMD64SUBQloadidx1, ssa.OpAMD64SUBQloadidx8, |
| ssa.OpAMD64ANDLloadidx1, ssa.OpAMD64ANDLloadidx4, ssa.OpAMD64ANDLloadidx8, ssa.OpAMD64ANDQloadidx1, ssa.OpAMD64ANDQloadidx8, |
| ssa.OpAMD64ORLloadidx1, ssa.OpAMD64ORLloadidx4, ssa.OpAMD64ORLloadidx8, ssa.OpAMD64ORQloadidx1, ssa.OpAMD64ORQloadidx8, |
| ssa.OpAMD64XORLloadidx1, ssa.OpAMD64XORLloadidx4, ssa.OpAMD64XORLloadidx8, ssa.OpAMD64XORQloadidx1, ssa.OpAMD64XORQloadidx8, |
| ssa.OpAMD64ADDSSloadidx1, ssa.OpAMD64ADDSSloadidx4, ssa.OpAMD64ADDSDloadidx1, ssa.OpAMD64ADDSDloadidx8, |
| ssa.OpAMD64SUBSSloadidx1, ssa.OpAMD64SUBSSloadidx4, ssa.OpAMD64SUBSDloadidx1, ssa.OpAMD64SUBSDloadidx8, |
| ssa.OpAMD64MULSSloadidx1, ssa.OpAMD64MULSSloadidx4, ssa.OpAMD64MULSDloadidx1, ssa.OpAMD64MULSDloadidx8, |
| ssa.OpAMD64DIVSSloadidx1, ssa.OpAMD64DIVSSloadidx4, ssa.OpAMD64DIVSDloadidx1, ssa.OpAMD64DIVSDloadidx8: |
| p := s.Prog(v.Op.Asm()) |
| |
| r, i := v.Args[1].Reg(), v.Args[2].Reg() |
| p.From.Type = obj.TYPE_MEM |
| p.From.Scale = v.Op.Scale() |
| if p.From.Scale == 1 && i == x86.REG_SP { |
| r, i = i, r |
| } |
| p.From.Reg = r |
| p.From.Index = i |
| |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpAMD64DUFFZERO: |
| if s.ABI != obj.ABIInternal { |
| // zero X15 manually |
| opregreg(s, x86.AXORPS, x86.REG_X15, x86.REG_X15) |
| } |
| off := duffStart(v.AuxInt) |
| adj := duffAdj(v.AuxInt) |
| var p *obj.Prog |
| if adj != 0 { |
| p = s.Prog(x86.ALEAQ) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Offset = adj |
| p.From.Reg = x86.REG_DI |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = x86.REG_DI |
| } |
| p = s.Prog(obj.ADUFFZERO) |
| p.To.Type = obj.TYPE_ADDR |
| p.To.Sym = ir.Syms.Duffzero |
| p.To.Offset = off |
| case ssa.OpAMD64DUFFCOPY: |
| p := s.Prog(obj.ADUFFCOPY) |
| p.To.Type = obj.TYPE_ADDR |
| p.To.Sym = ir.Syms.Duffcopy |
| if v.AuxInt%16 != 0 { |
| v.Fatalf("bad DUFFCOPY AuxInt %v", v.AuxInt) |
| } |
| p.To.Offset = 14 * (64 - v.AuxInt/16) |
| // 14 and 64 are magic constants. 14 is the number of bytes to encode: |
| // MOVUPS (SI), X0 |
| // ADDQ $16, SI |
| // MOVUPS X0, (DI) |
| // ADDQ $16, DI |
| // and 64 is the number of such blocks. See src/runtime/duff_amd64.s:duffcopy. |
| |
| case ssa.OpCopy: // TODO: use MOVQreg for reg->reg copies instead of OpCopy? |
| if v.Type.IsMemory() { |
| return |
| } |
| x := v.Args[0].Reg() |
| y := v.Reg() |
| if x != y { |
| opregreg(s, moveByType(v.Type), y, x) |
| } |
| case ssa.OpLoadReg: |
| if v.Type.IsFlags() { |
| v.Fatalf("load flags not implemented: %v", v.LongString()) |
| return |
| } |
| p := s.Prog(loadByType(v.Type)) |
| ssagen.AddrAuto(&p.From, v.Args[0]) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpStoreReg: |
| if v.Type.IsFlags() { |
| v.Fatalf("store flags not implemented: %v", v.LongString()) |
| return |
| } |
| p := s.Prog(storeByType(v.Type)) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[0].Reg() |
| ssagen.AddrAuto(&p.To, v) |
| case ssa.OpAMD64LoweredHasCPUFeature: |
| p := s.Prog(x86.AMOVBQZX) |
| p.From.Type = obj.TYPE_MEM |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpArgIntReg, ssa.OpArgFloatReg: |
| // The assembler needs to wrap the entry safepoint/stack growth code with spill/unspill |
| // The loop only runs once. |
| for _, ap := range v.Block.Func.RegArgs { |
| // Pass the spill/unspill information along to the assembler, offset by size of return PC pushed on stack. |
| addr := ssagen.SpillSlotAddr(ap, x86.REG_SP, v.Block.Func.Config.PtrSize) |
| s.FuncInfo().AddSpill( |
| obj.RegSpill{Reg: ap.Reg, Addr: addr, Unspill: loadByType(ap.Type), Spill: storeByType(ap.Type)}) |
| } |
| v.Block.Func.RegArgs = nil |
| ssagen.CheckArgReg(v) |
| case ssa.OpAMD64LoweredGetClosurePtr: |
| // Closure pointer is DX. |
| ssagen.CheckLoweredGetClosurePtr(v) |
| case ssa.OpAMD64LoweredGetG: |
| if s.ABI == obj.ABIInternal { |
| v.Fatalf("LoweredGetG should not appear in ABIInternal") |
| } |
| r := v.Reg() |
| getgFromTLS(s, r) |
| case ssa.OpAMD64CALLstatic, ssa.OpAMD64CALLtail: |
| if s.ABI == obj.ABI0 && v.Aux.(*ssa.AuxCall).Fn.ABI() == obj.ABIInternal { |
| // zeroing X15 when entering ABIInternal from ABI0 |
| if buildcfg.GOOS != "plan9" { // do not use SSE on Plan 9 |
| opregreg(s, x86.AXORPS, x86.REG_X15, x86.REG_X15) |
| } |
| // set G register from TLS |
| getgFromTLS(s, x86.REG_R14) |
| } |
| if v.Op == ssa.OpAMD64CALLtail { |
| s.TailCall(v) |
| break |
| } |
| s.Call(v) |
| if s.ABI == obj.ABIInternal && v.Aux.(*ssa.AuxCall).Fn.ABI() == obj.ABI0 { |
| // zeroing X15 when entering ABIInternal from ABI0 |
| if buildcfg.GOOS != "plan9" { // do not use SSE on Plan 9 |
| opregreg(s, x86.AXORPS, x86.REG_X15, x86.REG_X15) |
| } |
| // set G register from TLS |
| getgFromTLS(s, x86.REG_R14) |
| } |
| case ssa.OpAMD64CALLclosure, ssa.OpAMD64CALLinter: |
| s.Call(v) |
| |
| case ssa.OpAMD64LoweredGetCallerPC: |
| p := s.Prog(x86.AMOVQ) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Offset = -8 // PC is stored 8 bytes below first parameter. |
| p.From.Name = obj.NAME_PARAM |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64LoweredGetCallerSP: |
| // caller's SP is the address of the first arg |
| mov := x86.AMOVQ |
| if types.PtrSize == 4 { |
| mov = x86.AMOVL |
| } |
| p := s.Prog(mov) |
| p.From.Type = obj.TYPE_ADDR |
| p.From.Offset = -base.Ctxt.Arch.FixedFrameSize // 0 on amd64, just to be consistent with other architectures |
| p.From.Name = obj.NAME_PARAM |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64LoweredWB: |
| p := s.Prog(obj.ACALL) |
| p.To.Type = obj.TYPE_MEM |
| p.To.Name = obj.NAME_EXTERN |
| // arg0 is in DI. Set sym to match where regalloc put arg1. |
| p.To.Sym = ssagen.GCWriteBarrierReg[v.Args[1].Reg()] |
| |
| case ssa.OpAMD64LoweredPanicBoundsA, ssa.OpAMD64LoweredPanicBoundsB, ssa.OpAMD64LoweredPanicBoundsC: |
| p := s.Prog(obj.ACALL) |
| p.To.Type = obj.TYPE_MEM |
| p.To.Name = obj.NAME_EXTERN |
| p.To.Sym = ssagen.BoundsCheckFunc[v.AuxInt] |
| s.UseArgs(int64(2 * types.PtrSize)) // space used in callee args area by assembly stubs |
| |
| case ssa.OpAMD64NEGQ, ssa.OpAMD64NEGL, |
| ssa.OpAMD64BSWAPQ, ssa.OpAMD64BSWAPL, |
| ssa.OpAMD64NOTQ, ssa.OpAMD64NOTL: |
| p := s.Prog(v.Op.Asm()) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64NEGLflags: |
| p := s.Prog(v.Op.Asm()) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg0() |
| |
| case ssa.OpAMD64BSFQ, ssa.OpAMD64BSRQ, ssa.OpAMD64BSFL, ssa.OpAMD64BSRL, ssa.OpAMD64SQRTSD, ssa.OpAMD64SQRTSS: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[0].Reg() |
| p.To.Type = obj.TYPE_REG |
| switch v.Op { |
| case ssa.OpAMD64BSFQ, ssa.OpAMD64BSRQ: |
| p.To.Reg = v.Reg0() |
| case ssa.OpAMD64BSFL, ssa.OpAMD64BSRL, ssa.OpAMD64SQRTSD, ssa.OpAMD64SQRTSS: |
| p.To.Reg = v.Reg() |
| } |
| case ssa.OpAMD64ROUNDSD: |
| p := s.Prog(v.Op.Asm()) |
| val := v.AuxInt |
| // 0 means math.RoundToEven, 1 Floor, 2 Ceil, 3 Trunc |
| if val < 0 || val > 3 { |
| v.Fatalf("Invalid rounding mode") |
| } |
| p.From.Offset = val |
| p.From.Type = obj.TYPE_CONST |
| p.SetFrom3Reg(v.Args[0].Reg()) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| case ssa.OpAMD64POPCNTQ, ssa.OpAMD64POPCNTL, |
| ssa.OpAMD64TZCNTQ, ssa.OpAMD64TZCNTL, |
| ssa.OpAMD64LZCNTQ, ssa.OpAMD64LZCNTL: |
| if v.Args[0].Reg() != v.Reg() { |
| // POPCNT/TZCNT/LZCNT have a false dependency on the destination register on Intel cpus. |
| // TZCNT/LZCNT problem affects pre-Skylake models. See discussion at https://gcc.gnu.org/bugzilla/show_bug.cgi?id=62011#c7. |
| // Xor register with itself to break the dependency. |
| opregreg(s, x86.AXORL, v.Reg(), v.Reg()) |
| } |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[0].Reg() |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64SETEQ, ssa.OpAMD64SETNE, |
| ssa.OpAMD64SETL, ssa.OpAMD64SETLE, |
| ssa.OpAMD64SETG, ssa.OpAMD64SETGE, |
| ssa.OpAMD64SETGF, ssa.OpAMD64SETGEF, |
| ssa.OpAMD64SETB, ssa.OpAMD64SETBE, |
| ssa.OpAMD64SETORD, ssa.OpAMD64SETNAN, |
| ssa.OpAMD64SETA, ssa.OpAMD64SETAE, |
| ssa.OpAMD64SETO: |
| p := s.Prog(v.Op.Asm()) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| |
| case ssa.OpAMD64SETEQstore, ssa.OpAMD64SETNEstore, |
| ssa.OpAMD64SETLstore, ssa.OpAMD64SETLEstore, |
| ssa.OpAMD64SETGstore, ssa.OpAMD64SETGEstore, |
| ssa.OpAMD64SETBstore, ssa.OpAMD64SETBEstore, |
| ssa.OpAMD64SETAstore, ssa.OpAMD64SETAEstore: |
| p := s.Prog(v.Op.Asm()) |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| ssagen.AddAux(&p.To, v) |
| |
| case ssa.OpAMD64SETNEF: |
| t := v.RegTmp() |
| p := s.Prog(v.Op.Asm()) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| q := s.Prog(x86.ASETPS) |
| q.To.Type = obj.TYPE_REG |
| q.To.Reg = t |
| // ORL avoids partial register write and is smaller than ORQ, used by old compiler |
| opregreg(s, x86.AORL, v.Reg(), t) |
| |
| case ssa.OpAMD64SETEQF: |
| t := v.RegTmp() |
| p := s.Prog(v.Op.Asm()) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| q := s.Prog(x86.ASETPC) |
| q.To.Type = obj.TYPE_REG |
| q.To.Reg = t |
| // ANDL avoids partial register write and is smaller than ANDQ, used by old compiler |
| opregreg(s, x86.AANDL, v.Reg(), t) |
| |
| case ssa.OpAMD64InvertFlags: |
| v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString()) |
| case ssa.OpAMD64FlagEQ, ssa.OpAMD64FlagLT_ULT, ssa.OpAMD64FlagLT_UGT, ssa.OpAMD64FlagGT_ULT, ssa.OpAMD64FlagGT_UGT: |
| v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString()) |
| case ssa.OpAMD64AddTupleFirst32, ssa.OpAMD64AddTupleFirst64: |
| v.Fatalf("AddTupleFirst* should never make it to codegen %v", v.LongString()) |
| case ssa.OpAMD64REPSTOSQ: |
| s.Prog(x86.AREP) |
| s.Prog(x86.ASTOSQ) |
| case ssa.OpAMD64REPMOVSQ: |
| s.Prog(x86.AREP) |
| s.Prog(x86.AMOVSQ) |
| case ssa.OpAMD64LoweredNilCheck: |
| // Issue a load which will fault if the input is nil. |
| // TODO: We currently use the 2-byte instruction TESTB AX, (reg). |
| // Should we use the 3-byte TESTB $0, (reg) instead? It is larger |
| // but it doesn't have false dependency on AX. |
| // Or maybe allocate an output register and use MOVL (reg),reg2 ? |
| // That trades clobbering flags for clobbering a register. |
| p := s.Prog(x86.ATESTB) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = x86.REG_AX |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| if logopt.Enabled() { |
| logopt.LogOpt(v.Pos, "nilcheck", "genssa", v.Block.Func.Name) |
| } |
| if base.Debug.Nil != 0 && v.Pos.Line() > 1 { // v.Pos.Line()==1 in generated wrappers |
| base.WarnfAt(v.Pos, "generated nil check") |
| } |
| case ssa.OpAMD64MOVBatomicload, ssa.OpAMD64MOVLatomicload, ssa.OpAMD64MOVQatomicload: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = v.Args[0].Reg() |
| ssagen.AddAux(&p.From, v) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg0() |
| case ssa.OpAMD64XCHGB, ssa.OpAMD64XCHGL, ssa.OpAMD64XCHGQ: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Reg0() |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[1].Reg() |
| ssagen.AddAux(&p.To, v) |
| case ssa.OpAMD64XADDLlock, ssa.OpAMD64XADDQlock: |
| s.Prog(x86.ALOCK) |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Reg0() |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[1].Reg() |
| ssagen.AddAux(&p.To, v) |
| case ssa.OpAMD64CMPXCHGLlock, ssa.OpAMD64CMPXCHGQlock: |
| if v.Args[1].Reg() != x86.REG_AX { |
| v.Fatalf("input[1] not in AX %s", v.LongString()) |
| } |
| s.Prog(x86.ALOCK) |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[2].Reg() |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| ssagen.AddAux(&p.To, v) |
| p = s.Prog(x86.ASETEQ) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg0() |
| case ssa.OpAMD64ANDBlock, ssa.OpAMD64ANDLlock, ssa.OpAMD64ORBlock, ssa.OpAMD64ORLlock: |
| s.Prog(x86.ALOCK) |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = v.Args[1].Reg() |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = v.Args[0].Reg() |
| ssagen.AddAux(&p.To, v) |
| case ssa.OpAMD64PrefetchT0, ssa.OpAMD64PrefetchNTA: |
| p := s.Prog(v.Op.Asm()) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Reg = v.Args[0].Reg() |
| case ssa.OpClobber: |
| p := s.Prog(x86.AMOVL) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = 0xdeaddead |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = x86.REG_SP |
| ssagen.AddAux(&p.To, v) |
| p = s.Prog(x86.AMOVL) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = 0xdeaddead |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = x86.REG_SP |
| ssagen.AddAux(&p.To, v) |
| p.To.Offset += 4 |
| case ssa.OpClobberReg: |
| x := uint64(0xdeaddeaddeaddead) |
| p := s.Prog(x86.AMOVQ) |
| p.From.Type = obj.TYPE_CONST |
| p.From.Offset = int64(x) |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = v.Reg() |
| default: |
| v.Fatalf("genValue not implemented: %s", v.LongString()) |
| } |
| } |
| |
| var blockJump = [...]struct { |
| asm, invasm obj.As |
| }{ |
| ssa.BlockAMD64EQ: {x86.AJEQ, x86.AJNE}, |
| ssa.BlockAMD64NE: {x86.AJNE, x86.AJEQ}, |
| ssa.BlockAMD64LT: {x86.AJLT, x86.AJGE}, |
| ssa.BlockAMD64GE: {x86.AJGE, x86.AJLT}, |
| ssa.BlockAMD64LE: {x86.AJLE, x86.AJGT}, |
| ssa.BlockAMD64GT: {x86.AJGT, x86.AJLE}, |
| ssa.BlockAMD64OS: {x86.AJOS, x86.AJOC}, |
| ssa.BlockAMD64OC: {x86.AJOC, x86.AJOS}, |
| ssa.BlockAMD64ULT: {x86.AJCS, x86.AJCC}, |
| ssa.BlockAMD64UGE: {x86.AJCC, x86.AJCS}, |
| ssa.BlockAMD64UGT: {x86.AJHI, x86.AJLS}, |
| ssa.BlockAMD64ULE: {x86.AJLS, x86.AJHI}, |
| ssa.BlockAMD64ORD: {x86.AJPC, x86.AJPS}, |
| ssa.BlockAMD64NAN: {x86.AJPS, x86.AJPC}, |
| } |
| |
| var eqfJumps = [2][2]ssagen.IndexJump{ |
| {{Jump: x86.AJNE, Index: 1}, {Jump: x86.AJPS, Index: 1}}, // next == b.Succs[0] |
| {{Jump: x86.AJNE, Index: 1}, {Jump: x86.AJPC, Index: 0}}, // next == b.Succs[1] |
| } |
| var nefJumps = [2][2]ssagen.IndexJump{ |
| {{Jump: x86.AJNE, Index: 0}, {Jump: x86.AJPC, Index: 1}}, // next == b.Succs[0] |
| {{Jump: x86.AJNE, Index: 0}, {Jump: x86.AJPS, Index: 0}}, // next == b.Succs[1] |
| } |
| |
| func ssaGenBlock(s *ssagen.State, b, next *ssa.Block) { |
| switch b.Kind { |
| case ssa.BlockPlain: |
| if b.Succs[0].Block() != next { |
| p := s.Prog(obj.AJMP) |
| p.To.Type = obj.TYPE_BRANCH |
| s.Branches = append(s.Branches, ssagen.Branch{P: p, B: b.Succs[0].Block()}) |
| } |
| case ssa.BlockDefer: |
| // defer returns in rax: |
| // 0 if we should continue executing |
| // 1 if we should jump to deferreturn call |
| p := s.Prog(x86.ATESTL) |
| p.From.Type = obj.TYPE_REG |
| p.From.Reg = x86.REG_AX |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = x86.REG_AX |
| p = s.Prog(x86.AJNE) |
| p.To.Type = obj.TYPE_BRANCH |
| s.Branches = append(s.Branches, ssagen.Branch{P: p, B: b.Succs[1].Block()}) |
| if b.Succs[0].Block() != next { |
| p := s.Prog(obj.AJMP) |
| p.To.Type = obj.TYPE_BRANCH |
| s.Branches = append(s.Branches, ssagen.Branch{P: p, B: b.Succs[0].Block()}) |
| } |
| case ssa.BlockExit, ssa.BlockRetJmp: |
| case ssa.BlockRet: |
| s.Prog(obj.ARET) |
| |
| case ssa.BlockAMD64EQF: |
| s.CombJump(b, next, &eqfJumps) |
| |
| case ssa.BlockAMD64NEF: |
| s.CombJump(b, next, &nefJumps) |
| |
| case ssa.BlockAMD64EQ, ssa.BlockAMD64NE, |
| ssa.BlockAMD64LT, ssa.BlockAMD64GE, |
| ssa.BlockAMD64LE, ssa.BlockAMD64GT, |
| ssa.BlockAMD64OS, ssa.BlockAMD64OC, |
| ssa.BlockAMD64ULT, ssa.BlockAMD64UGT, |
| ssa.BlockAMD64ULE, ssa.BlockAMD64UGE: |
| jmp := blockJump[b.Kind] |
| switch next { |
| case b.Succs[0].Block(): |
| s.Br(jmp.invasm, b.Succs[1].Block()) |
| case b.Succs[1].Block(): |
| s.Br(jmp.asm, b.Succs[0].Block()) |
| default: |
| if b.Likely != ssa.BranchUnlikely { |
| s.Br(jmp.asm, b.Succs[0].Block()) |
| s.Br(obj.AJMP, b.Succs[1].Block()) |
| } else { |
| s.Br(jmp.invasm, b.Succs[1].Block()) |
| s.Br(obj.AJMP, b.Succs[0].Block()) |
| } |
| } |
| |
| case ssa.BlockAMD64JUMPTABLE: |
| // JMP *(TABLE)(INDEX*8) |
| p := s.Prog(obj.AJMP) |
| p.To.Type = obj.TYPE_MEM |
| p.To.Reg = b.Controls[1].Reg() |
| p.To.Index = b.Controls[0].Reg() |
| p.To.Scale = 8 |
| // Save jump tables for later resolution of the target blocks. |
| s.JumpTables = append(s.JumpTables, b) |
| |
| default: |
| b.Fatalf("branch not implemented: %s", b.LongString()) |
| } |
| } |
| |
| func loadRegResult(s *ssagen.State, f *ssa.Func, t *types.Type, reg int16, n *ir.Name, off int64) *obj.Prog { |
| p := s.Prog(loadByType(t)) |
| p.From.Type = obj.TYPE_MEM |
| p.From.Name = obj.NAME_AUTO |
| p.From.Sym = n.Linksym() |
| p.From.Offset = n.FrameOffset() + off |
| p.To.Type = obj.TYPE_REG |
| p.To.Reg = reg |
| return p |
| } |
| |
| func spillArgReg(pp *objw.Progs, p *obj.Prog, f *ssa.Func, t *types.Type, reg int16, n *ir.Name, off int64) *obj.Prog { |
| p = pp.Append(p, storeByType(t), obj.TYPE_REG, reg, 0, obj.TYPE_MEM, 0, n.FrameOffset()+off) |
| p.To.Name = obj.NAME_PARAM |
| p.To.Sym = n.Linksym() |
| p.Pos = p.Pos.WithNotStmt() |
| return p |
| } |