| // mkerrors_nacl.sh /home/rsc/pub/nacl/native_client/src/trusted/service_runtime/include/sys/errno.h | |
| // MACHINE GENERATED BY THE COMMAND ABOVE; DO NOT EDIT | |
| package syscall | |
| const ( | |
| EPERM = 1 | |
| ENOENT = 2 | |
| ESRCH = 3 | |
| EINTR = 4 | |
| EIO = 5 | |
| ENXIO = 6 | |
| E2BIG = 7 | |
| ENOEXEC = 8 | |
| EBADF = 9 | |
| ECHILD = 10 | |
| EAGAIN = 11 | |
| ENOMEM = 12 | |
| EACCES = 13 | |
| EFAULT = 14 | |
| EBUSY = 16 | |
| EEXIST = 17 | |
| EXDEV = 18 | |
| ENODEV = 19 | |
| ENOTDIR = 20 | |
| EISDIR = 21 | |
| EINVAL = 22 | |
| ENFILE = 23 | |
| EMFILE = 24 | |
| ENOTTY = 25 | |
| EFBIG = 27 | |
| ENOSPC = 28 | |
| ESPIPE = 29 | |
| EROFS = 30 | |
| EMLINK = 31 | |
| EPIPE = 32 | |
| ENAMETOOLONG = 36 | |
| ENOSYS = 38 | |
| EDQUOT = 122 | |
| EDOM = 33 | |
| ERANGE = 34 | |
| ENOMSG = 35 | |
| ECHRNG = 37 | |
| EL3HLT = 39 | |
| EL3RST = 40 | |
| ELNRNG = 41 | |
| EUNATCH = 42 | |
| ENOCSI = 43 | |
| EL2HLT = 44 | |
| EDEADLK = 45 | |
| ENOLCK = 46 | |
| EBADE = 50 | |
| EBADR = 51 | |
| EXFULL = 52 | |
| ENOANO = 53 | |
| EBADRQC = 54 | |
| EBADSLT = 55 | |
| EBFONT = 57 | |
| ENOSTR = 60 | |
| ENODATA = 61 | |
| ETIME = 62 | |
| ENOSR = 63 | |
| ENONET = 64 | |
| ENOPKG = 65 | |
| EREMOTE = 66 | |
| ENOLINK = 67 | |
| EADV = 68 | |
| ESRMNT = 69 | |
| ECOMM = 70 | |
| EPROTO = 71 | |
| EMULTIHOP = 74 | |
| ELBIN = 75 | |
| EDOTDOT = 76 | |
| EBADMSG = 77 | |
| EFTYPE = 79 | |
| ENOTUNIQ = 80 | |
| EBADFD = 81 | |
| EREMCHG = 82 | |
| ELIBACC = 83 | |
| ELIBBAD = 84 | |
| ELIBSCN = 85 | |
| ELIBMAX = 86 | |
| ELIBEXEC = 87 | |
| ENMFILE = 89 | |
| ENOTEMPTY = 90 | |
| ELOOP = 92 | |
| EOPNOTSUPP = 95 | |
| EPFNOSUPPORT = 96 | |
| ECONNRESET = 104 | |
| ENOBUFS = 105 | |
| EAFNOSUPPORT = 106 | |
| EPROTOTYPE = 107 | |
| ENOTSOCK = 108 | |
| ENOPROTOOPT = 109 | |
| ESHUTDOWN = 110 | |
| ECONNREFUSED = 111 | |
| EADDRINUSE = 112 | |
| ECONNABORTED = 113 | |
| ENETUNREACH = 114 | |
| ENETDOWN = 115 | |
| ETIMEDOUT = 116 | |
| EHOSTDOWN = 117 | |
| EHOSTUNREACH = 118 | |
| EINPROGRESS = 119 | |
| EALREADY = 120 | |
| EDESTADDRREQ = 121 | |
| EPROTONOSUPPORT = 123 | |
| ESOCKTNOSUPPORT = 124 | |
| EADDRNOTAVAIL = 125 | |
| ENETRESET = 126 | |
| EISCONN = 127 | |
| ENOTCONN = 128 | |
| ETOOMANYREFS = 129 | |
| EPROCLIM = 130 | |
| EUSERS = 131 | |
| ESTALE = 133 | |
| ENOMEDIUM = 135 | |
| ENOSHARE = 136 | |
| ECASECLASH = 137 | |
| EILSEQ = 138 | |
| EOVERFLOW = 139 | |
| ECANCELED = 140 | |
| EL2NSYNC = 88 | |
| EIDRM = 91 | |
| EMSGSIZE = 132 | |
| ENACL = 99 /* otherwise unused */ | |
| ) | |
| // Error table | |
| var errors = [...]string{ | |
| EPERM: "operation not permitted", | |
| ENOENT: "no such file or directory", | |
| ESRCH: "no such process", | |
| EINTR: "interrupted system call", | |
| EIO: "I/O error", | |
| ENXIO: "no such device or address", | |
| E2BIG: "argument list too long", | |
| ENOEXEC: "exec format error", | |
| EBADF: "bad file number", | |
| ECHILD: "no child processes", | |
| EAGAIN: "try again", | |
| ENOMEM: "out of memory", | |
| EACCES: "permission denied", | |
| EFAULT: "bad address", | |
| EBUSY: "device or resource busy", | |
| EEXIST: "file exists", | |
| EXDEV: "cross-device link", | |
| ENODEV: "no such device", | |
| ENOTDIR: "not a directory", | |
| EISDIR: "is a directory", | |
| EINVAL: "invalid argument", | |
| ENFILE: "file table overflow", | |
| EMFILE: "too many open files", | |
| ENOTTY: "not a typewriter", | |
| EFBIG: "file too large", | |
| ENOSPC: "no space left on device", | |
| ESPIPE: "illegal seek", | |
| EROFS: "read-only file system", | |
| EMLINK: "too many links", | |
| EPIPE: "broken pipe", | |
| ENAMETOOLONG: "file name too long", | |
| ENOSYS: "function not implemented", | |
| EDQUOT: "quota exceeded", | |
| EDOM: "math arg out of domain of func", | |
| ERANGE: "math result not representable", | |
| ENOMSG: "no message of desired type", | |
| ECHRNG: "channel number out of range", | |
| EL3HLT: "level 3 halted", | |
| EL3RST: "level 3 reset", | |
| ELNRNG: "link number out of range", | |
| EUNATCH: "protocol driver not attached", | |
| ENOCSI: "no CSI structure available", | |
| EL2HLT: "level 2 halted", | |
| EDEADLK: "deadlock condition", | |
| ENOLCK: "no record locks available", | |
| EBADE: "invalid exchange", | |
| EBADR: "invalid request descriptor", | |
| EXFULL: "exchange full", | |
| ENOANO: "no anode", | |
| EBADRQC: "invalid request code", | |
| EBADSLT: "invalid slot", | |
| EBFONT: "bad font file fmt", | |
| ENOSTR: "device not a stream", | |
| ENODATA: "no data (for no delay io)", | |
| ETIME: "timer expired", | |
| ENOSR: "out of streams resources", | |
| ENONET: "machine is not on the network", | |
| ENOPKG: "package not installed", | |
| EREMOTE: "the object is remote", | |
| ENOLINK: "the link has been severed", | |
| EADV: "advertise error", | |
| ESRMNT: "srmount error", | |
| ECOMM: "communication error on send", | |
| EPROTO: "protocol error", | |
| EMULTIHOP: "multihop attempted", | |
| ELBIN: "inode is remote (not really error)", | |
| EDOTDOT: "cross mount point (not really error)", | |
| EBADMSG: "trying to read unreadable message", | |
| EFTYPE: "inappropriate file type or format", | |
| ENOTUNIQ: "given log. name not unique", | |
| EBADFD: "f.d. invalid for this operation", | |
| EREMCHG: "remote address changed", | |
| ELIBACC: "can't access a needed shared lib", | |
| ELIBBAD: "accessing a corrupted shared lib", | |
| ELIBSCN: ".lib section in a.out corrupted", | |
| ELIBMAX: "attempting to link in too many libs", | |
| ELIBEXEC: "attempting to exec a shared library", | |
| ENMFILE: "no more files", | |
| ENOTEMPTY: "directory not empty", | |
| ELOOP: "too many symbolic links", | |
| EOPNOTSUPP: "operation not supported on transport endpoint", | |
| EPFNOSUPPORT: "protocol family not supported", | |
| ECONNRESET: "connection reset by peer", | |
| ENOBUFS: "no buffer space available", | |
| EAFNOSUPPORT: "address family not supported by protocol family", | |
| EPROTOTYPE: "protocol wrong type for socket", | |
| ENOTSOCK: "socket operation on non-socket", | |
| ENOPROTOOPT: "protocol not available", | |
| ESHUTDOWN: "can't send after socket shutdown", | |
| ECONNREFUSED: "connection refused", | |
| EADDRINUSE: "address already in use", | |
| ECONNABORTED: "connection aborted", | |
| ENETUNREACH: "network is unreachable", | |
| ENETDOWN: "network interface is not configured", | |
| ETIMEDOUT: "connection timed out", | |
| EHOSTDOWN: "host is down", | |
| EHOSTUNREACH: "host is unreachable", | |
| EINPROGRESS: "connection already in progress", | |
| EALREADY: "socket already connected", | |
| EDESTADDRREQ: "destination address required", | |
| EPROTONOSUPPORT: "unknown protocol", | |
| ESOCKTNOSUPPORT: "socket type not supported", | |
| EADDRNOTAVAIL: "address not available", | |
| EISCONN: "socket is already connected", | |
| ENOTCONN: "socket is not connected", | |
| ENOMEDIUM: "no medium (in tape drive)", | |
| ENOSHARE: "no such host or network path", | |
| ECASECLASH: "filename exists with different case", | |
| EOVERFLOW: "value too large for defined data type", | |
| ECANCELED: "operation canceled.", | |
| EL2NSYNC: "level 2 not synchronized", | |
| EIDRM: "identifier removed", | |
| EMSGSIZE: "message too long", | |
| ENACL: "not supported by native client", | |
| } |