| // Copyright 2009 The Go Authors. All rights reserved. | |
| // Use of this source code is governed by a BSD-style | |
| // license that can be found in the LICENSE file. | |
| /* | |
| * select | |
| */ | |
| #include <u.h> | |
| #include <libc.h> | |
| #include "go.h" | |
| void | |
| typecheckselect(Node *sel) | |
| { | |
| Node *ncase, *n, *def; | |
| NodeList *l; | |
| int lno, count; | |
| def = nil; | |
| lno = setlineno(sel); | |
| count = 0; | |
| typechecklist(sel->ninit, Etop); | |
| for(l=sel->list; l; l=l->next) { | |
| count++; | |
| ncase = l->n; | |
| setlineno(ncase); | |
| if(ncase->op != OXCASE) | |
| fatal("typecheckselect %O", ncase->op); | |
| if(ncase->list == nil) { | |
| // default | |
| if(def != N) | |
| yyerror("multiple defaults in select (first at %L)", def->lineno); | |
| else | |
| def = ncase; | |
| } else if(ncase->list->next) { | |
| yyerror("select cases cannot be lists"); | |
| } else { | |
| n = typecheck(&ncase->list->n, Etop); | |
| ncase->left = n; | |
| ncase->list = nil; | |
| setlineno(n); | |
| switch(n->op) { | |
| default: | |
| yyerror("select case must be receive, send or assign recv"); | |
| break; | |
| case OAS: | |
| // convert x = <-c into OSELRECV(x, <-c). | |
| // remove implicit conversions; the eventual assignment | |
| // will reintroduce them. | |
| if((n->right->op == OCONVNOP || n->right->op == OCONVIFACE) && n->right->implicit) | |
| n->right = n->right->left; | |
| if(n->right->op != ORECV) { | |
| yyerror("select assignment must have receive on right hand side"); | |
| break; | |
| } | |
| n->op = OSELRECV; | |
| break; | |
| case OAS2RECV: | |
| // convert x, ok = <-c into OSELRECV2(x, <-c) with ntest=ok | |
| if(n->rlist->n->op != ORECV) { | |
| yyerror("select assignment must have receive on right hand side"); | |
| break; | |
| } | |
| n->op = OSELRECV2; | |
| n->left = n->list->n; | |
| n->ntest = n->list->next->n; | |
| n->list = nil; | |
| n->right = n->rlist->n; | |
| n->rlist = nil; | |
| break; | |
| case ORECV: | |
| // convert <-c into OSELRECV(N, <-c) | |
| n = nod(OSELRECV, N, n); | |
| n->typecheck = 1; | |
| ncase->left = n; | |
| break; | |
| case OSEND: | |
| break; | |
| } | |
| } | |
| typechecklist(ncase->nbody, Etop); | |
| } | |
| sel->xoffset = count; | |
| lineno = lno; | |
| } | |
| void | |
| walkselect(Node *sel) | |
| { | |
| int lno, i; | |
| Node *n, *r, *a, *var, *cas, *dflt, *ch; | |
| NodeList *l, *init; | |
| if(sel->list == nil && sel->xoffset != 0) | |
| fatal("double walkselect"); // already rewrote | |
| lno = setlineno(sel); | |
| i = count(sel->list); | |
| // optimization: zero-case select | |
| if(i == 0) { | |
| sel->nbody = list1(mkcall("block", nil, nil)); | |
| goto out; | |
| } | |
| // optimization: one-case select: single op. | |
| // TODO(rsc): Reenable optimization once order.c can handle it. | |
| // golang.org/issue/7672. | |
| if(i == 1) { | |
| cas = sel->list->n; | |
| setlineno(cas); | |
| l = cas->ninit; | |
| if(cas->left != N) { // not default: | |
| n = cas->left; | |
| l = concat(l, n->ninit); | |
| n->ninit = nil; | |
| switch(n->op) { | |
| default: | |
| fatal("select %O", n->op); | |
| case OSEND: | |
| // ok already | |
| ch = n->left; | |
| break; | |
| case OSELRECV: | |
| ch = n->right->left; | |
| Selrecv1: | |
| if(n->left == N) | |
| n = n->right; | |
| else | |
| n->op = OAS; | |
| break; | |
| case OSELRECV2: | |
| ch = n->right->left; | |
| if(n->ntest == N) | |
| goto Selrecv1; | |
| if(n->left == N) { | |
| typecheck(&nblank, Erv | Easgn); | |
| n->left = nblank; | |
| } | |
| n->op = OAS2; | |
| n->list = list(list1(n->left), n->ntest); | |
| n->rlist = list1(n->right); | |
| n->right = N; | |
| n->left = N; | |
| n->ntest = N; | |
| n->typecheck = 0; | |
| typecheck(&n, Etop); | |
| break; | |
| } | |
| // if ch == nil { block() }; n; | |
| a = nod(OIF, N, N); | |
| a->ntest = nod(OEQ, ch, nodnil()); | |
| a->nbody = list1(mkcall("block", nil, &l)); | |
| typecheck(&a, Etop); | |
| l = list(l, a); | |
| l = list(l, n); | |
| } | |
| l = concat(l, cas->nbody); | |
| sel->nbody = l; | |
| goto out; | |
| } | |
| // convert case value arguments to addresses. | |
| // this rewrite is used by both the general code and the next optimization. | |
| for(l=sel->list; l; l=l->next) { | |
| cas = l->n; | |
| setlineno(cas); | |
| n = cas->left; | |
| if(n == N) | |
| continue; | |
| switch(n->op) { | |
| case OSEND: | |
| n->right = nod(OADDR, n->right, N); | |
| typecheck(&n->right, Erv); | |
| break; | |
| case OSELRECV: | |
| case OSELRECV2: | |
| if(n->op == OSELRECV2 && n->ntest == N) | |
| n->op = OSELRECV; | |
| if(n->op == OSELRECV2) { | |
| n->ntest = nod(OADDR, n->ntest, N); | |
| typecheck(&n->ntest, Erv); | |
| } | |
| if(n->left == N) | |
| n->left = nodnil(); | |
| else { | |
| n->left = nod(OADDR, n->left, N); | |
| typecheck(&n->left, Erv); | |
| } | |
| break; | |
| } | |
| } | |
| // optimization: two-case select but one is default: single non-blocking op. | |
| if(i == 2 && (sel->list->n->left == nil || sel->list->next->n->left == nil)) { | |
| if(sel->list->n->left == nil) { | |
| cas = sel->list->next->n; | |
| dflt = sel->list->n; | |
| } else { | |
| dflt = sel->list->next->n; | |
| cas = sel->list->n; | |
| } | |
| n = cas->left; | |
| setlineno(n); | |
| r = nod(OIF, N, N); | |
| r->ninit = cas->ninit; | |
| switch(n->op) { | |
| default: | |
| fatal("select %O", n->op); | |
| case OSEND: | |
| // if selectnbsend(c, v) { body } else { default body } | |
| ch = n->left; | |
| r->ntest = mkcall1(chanfn("selectnbsend", 2, ch->type), | |
| types[TBOOL], &r->ninit, typename(ch->type), ch, n->right); | |
| break; | |
| case OSELRECV: | |
| // if c != nil && selectnbrecv(&v, c) { body } else { default body } | |
| r = nod(OIF, N, N); | |
| r->ninit = cas->ninit; | |
| ch = n->right->left; | |
| r->ntest = mkcall1(chanfn("selectnbrecv", 2, ch->type), | |
| types[TBOOL], &r->ninit, typename(ch->type), n->left, ch); | |
| break; | |
| case OSELRECV2: | |
| // if c != nil && selectnbrecv2(&v, c) { body } else { default body } | |
| r = nod(OIF, N, N); | |
| r->ninit = cas->ninit; | |
| ch = n->right->left; | |
| r->ntest = mkcall1(chanfn("selectnbrecv2", 2, ch->type), | |
| types[TBOOL], &r->ninit, typename(ch->type), n->left, n->ntest, ch); | |
| break; | |
| } | |
| typecheck(&r->ntest, Erv); | |
| r->nbody = cas->nbody; | |
| r->nelse = concat(dflt->ninit, dflt->nbody); | |
| sel->nbody = list1(r); | |
| goto out; | |
| } | |
| init = sel->ninit; | |
| sel->ninit = nil; | |
| // generate sel-struct | |
| setlineno(sel); | |
| var = temp(ptrto(types[TUINT8])); | |
| r = nod(OAS, var, mkcall("newselect", var->type, nil, nodintconst(sel->xoffset))); | |
| typecheck(&r, Etop); | |
| init = list(init, r); | |
| // register cases | |
| for(l=sel->list; l; l=l->next) { | |
| cas = l->n; | |
| setlineno(cas); | |
| n = cas->left; | |
| r = nod(OIF, N, N); | |
| r->ninit = cas->ninit; | |
| cas->ninit = nil; | |
| if(n != nil) { | |
| r->ninit = concat(r->ninit, n->ninit); | |
| n->ninit = nil; | |
| } | |
| if(n == nil) { | |
| // selectdefault(sel *byte); | |
| r->ntest = mkcall("selectdefault", types[TBOOL], &r->ninit, var); | |
| } else { | |
| switch(n->op) { | |
| default: | |
| fatal("select %O", n->op); | |
| case OSEND: | |
| // selectsend(sel *byte, hchan *chan any, elem *any) (selected bool); | |
| r->ntest = mkcall1(chanfn("selectsend", 2, n->left->type), types[TBOOL], | |
| &r->ninit, var, n->left, n->right); | |
| break; | |
| case OSELRECV: | |
| // selectrecv(sel *byte, hchan *chan any, elem *any) (selected bool); | |
| r->ntest = mkcall1(chanfn("selectrecv", 2, n->right->left->type), types[TBOOL], | |
| &r->ninit, var, n->right->left, n->left); | |
| break; | |
| case OSELRECV2: | |
| // selectrecv2(sel *byte, hchan *chan any, elem *any, received *bool) (selected bool); | |
| r->ntest = mkcall1(chanfn("selectrecv2", 2, n->right->left->type), types[TBOOL], | |
| &r->ninit, var, n->right->left, n->left, n->ntest); | |
| break; | |
| } | |
| } | |
| r->nbody = concat(r->nbody, cas->nbody); | |
| r->nbody = list(r->nbody, nod(OBREAK, N, N)); | |
| init = list(init, r); | |
| } | |
| // run the select | |
| setlineno(sel); | |
| init = list(init, mkcall("selectgo", T, nil, var)); | |
| sel->nbody = init; | |
| out: | |
| sel->list = nil; | |
| walkstmtlist(sel->nbody); | |
| lineno = lno; | |
| } |