| // Copyright 2009 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| package gc |
| |
| // select |
| func typecheckselect(sel *Node) { |
| var ncase *Node |
| var n *Node |
| |
| var def *Node |
| lno := int(setlineno(sel)) |
| count := 0 |
| typechecklist(sel.Ninit, Etop) |
| for l := sel.List; l != nil; l = l.Next { |
| count++ |
| ncase = l.N |
| setlineno(ncase) |
| if ncase.Op != OXCASE { |
| Fatalf("typecheckselect %v", Oconv(int(ncase.Op), 0)) |
| } |
| |
| if ncase.List == nil { |
| // default |
| if def != nil { |
| Yyerror("multiple defaults in select (first at %v)", def.Line()) |
| } else { |
| def = ncase |
| } |
| } else if ncase.List.Next != nil { |
| Yyerror("select cases cannot be lists") |
| } else { |
| n = typecheck(&ncase.List.N, Etop) |
| ncase.Left = n |
| ncase.List = nil |
| setlineno(n) |
| switch n.Op { |
| default: |
| Yyerror("select case must be receive, send or assign recv") |
| |
| // convert x = <-c into OSELRECV(x, <-c). |
| // remove implicit conversions; the eventual assignment |
| // will reintroduce them. |
| case OAS: |
| if (n.Right.Op == OCONVNOP || n.Right.Op == OCONVIFACE) && n.Right.Implicit { |
| n.Right = n.Right.Left |
| } |
| |
| if n.Right.Op != ORECV { |
| Yyerror("select assignment must have receive on right hand side") |
| break |
| } |
| |
| n.Op = OSELRECV |
| |
| // convert x, ok = <-c into OSELRECV2(x, <-c) with ntest=ok |
| case OAS2RECV: |
| if n.Rlist.N.Op != ORECV { |
| Yyerror("select assignment must have receive on right hand side") |
| break |
| } |
| |
| n.Op = OSELRECV2 |
| n.Left = n.List.N |
| n.List = list1(n.List.Next.N) |
| n.Right = n.Rlist.N |
| n.Rlist = nil |
| |
| // convert <-c into OSELRECV(N, <-c) |
| case ORECV: |
| n = Nod(OSELRECV, nil, n) |
| |
| n.Typecheck = 1 |
| ncase.Left = n |
| |
| case OSEND: |
| break |
| } |
| } |
| |
| typechecklist(ncase.Nbody, Etop) |
| } |
| |
| sel.Xoffset = int64(count) |
| lineno = int32(lno) |
| } |
| |
| func walkselect(sel *Node) { |
| if sel.List == nil && sel.Xoffset != 0 { |
| Fatalf("double walkselect") // already rewrote |
| } |
| |
| lno := int(setlineno(sel)) |
| i := count(sel.List) |
| |
| // optimization: zero-case select |
| var init *NodeList |
| var r *Node |
| var n *Node |
| var var_ *Node |
| var selv *Node |
| var cas *Node |
| if i == 0 { |
| sel.Nbody = list1(mkcall("block", nil, nil)) |
| goto out |
| } |
| |
| // optimization: one-case select: single op. |
| // TODO(rsc): Reenable optimization once order.go can handle it. |
| // golang.org/issue/7672. |
| if i == 1 { |
| cas := sel.List.N |
| setlineno(cas) |
| l := cas.Ninit |
| if cas.Left != nil { // not default: |
| n := cas.Left |
| l = concat(l, n.Ninit) |
| n.Ninit = nil |
| var ch *Node |
| switch n.Op { |
| default: |
| Fatalf("select %v", Oconv(int(n.Op), 0)) |
| |
| // ok already |
| case OSEND: |
| ch = n.Left |
| |
| case OSELRECV, OSELRECV2: |
| ch = n.Right.Left |
| if n.Op == OSELRECV || n.List == nil { |
| if n.Left == nil { |
| n = n.Right |
| } else { |
| n.Op = OAS |
| } |
| break |
| } |
| |
| if n.Left == nil { |
| typecheck(&nblank, Erv|Easgn) |
| n.Left = nblank |
| } |
| |
| n.Op = OAS2 |
| n.List = concat(list1(n.Left), n.List) |
| n.Rlist = list1(n.Right) |
| n.Right = nil |
| n.Left = nil |
| n.Typecheck = 0 |
| typecheck(&n, Etop) |
| } |
| |
| // if ch == nil { block() }; n; |
| a := Nod(OIF, nil, nil) |
| |
| a.Left = Nod(OEQ, ch, nodnil()) |
| a.Nbody = list1(mkcall("block", nil, &l)) |
| typecheck(&a, Etop) |
| l = list(l, a) |
| l = list(l, n) |
| } |
| |
| l = concat(l, cas.Nbody) |
| sel.Nbody = l |
| goto out |
| } |
| |
| // convert case value arguments to addresses. |
| // this rewrite is used by both the general code and the next optimization. |
| for l := sel.List; l != nil; l = l.Next { |
| cas = l.N |
| setlineno(cas) |
| n = cas.Left |
| if n == nil { |
| continue |
| } |
| switch n.Op { |
| case OSEND: |
| n.Right = Nod(OADDR, n.Right, nil) |
| typecheck(&n.Right, Erv) |
| |
| case OSELRECV, OSELRECV2: |
| if n.Op == OSELRECV2 && n.List == nil { |
| n.Op = OSELRECV |
| } |
| if n.Op == OSELRECV2 { |
| n.List.N = Nod(OADDR, n.List.N, nil) |
| typecheck(&n.List.N, Erv) |
| } |
| |
| if n.Left == nil { |
| n.Left = nodnil() |
| } else { |
| n.Left = Nod(OADDR, n.Left, nil) |
| typecheck(&n.Left, Erv) |
| } |
| } |
| } |
| |
| // optimization: two-case select but one is default: single non-blocking op. |
| if i == 2 && (sel.List.N.Left == nil || sel.List.Next.N.Left == nil) { |
| var cas *Node |
| var dflt *Node |
| if sel.List.N.Left == nil { |
| cas = sel.List.Next.N |
| dflt = sel.List.N |
| } else { |
| dflt = sel.List.Next.N |
| cas = sel.List.N |
| } |
| |
| n := cas.Left |
| setlineno(n) |
| r := Nod(OIF, nil, nil) |
| r.Ninit = cas.Ninit |
| switch n.Op { |
| default: |
| Fatalf("select %v", Oconv(int(n.Op), 0)) |
| |
| // if selectnbsend(c, v) { body } else { default body } |
| case OSEND: |
| ch := n.Left |
| |
| r.Left = mkcall1(chanfn("selectnbsend", 2, ch.Type), Types[TBOOL], &r.Ninit, typename(ch.Type), ch, n.Right) |
| |
| // if c != nil && selectnbrecv(&v, c) { body } else { default body } |
| case OSELRECV: |
| r = Nod(OIF, nil, nil) |
| |
| r.Ninit = cas.Ninit |
| ch := n.Right.Left |
| r.Left = mkcall1(chanfn("selectnbrecv", 2, ch.Type), Types[TBOOL], &r.Ninit, typename(ch.Type), n.Left, ch) |
| |
| // if c != nil && selectnbrecv2(&v, c) { body } else { default body } |
| case OSELRECV2: |
| r = Nod(OIF, nil, nil) |
| |
| r.Ninit = cas.Ninit |
| ch := n.Right.Left |
| r.Left = mkcall1(chanfn("selectnbrecv2", 2, ch.Type), Types[TBOOL], &r.Ninit, typename(ch.Type), n.Left, n.List.N, ch) |
| } |
| |
| typecheck(&r.Left, Erv) |
| r.Nbody = cas.Nbody |
| r.Rlist = concat(dflt.Ninit, dflt.Nbody) |
| sel.Nbody = list1(r) |
| goto out |
| } |
| |
| init = sel.Ninit |
| sel.Ninit = nil |
| |
| // generate sel-struct |
| setlineno(sel) |
| |
| selv = temp(selecttype(int32(sel.Xoffset))) |
| r = Nod(OAS, selv, nil) |
| typecheck(&r, Etop) |
| init = list(init, r) |
| var_ = conv(conv(Nod(OADDR, selv, nil), Types[TUNSAFEPTR]), Ptrto(Types[TUINT8])) |
| r = mkcall("newselect", nil, nil, var_, Nodintconst(selv.Type.Width), Nodintconst(sel.Xoffset)) |
| typecheck(&r, Etop) |
| init = list(init, r) |
| |
| // register cases |
| for l := sel.List; l != nil; l = l.Next { |
| cas = l.N |
| setlineno(cas) |
| n = cas.Left |
| r = Nod(OIF, nil, nil) |
| r.Ninit = cas.Ninit |
| cas.Ninit = nil |
| if n != nil { |
| r.Ninit = concat(r.Ninit, n.Ninit) |
| n.Ninit = nil |
| } |
| |
| if n == nil { |
| // selectdefault(sel *byte); |
| r.Left = mkcall("selectdefault", Types[TBOOL], &r.Ninit, var_) |
| } else { |
| switch n.Op { |
| default: |
| Fatalf("select %v", Oconv(int(n.Op), 0)) |
| |
| // selectsend(sel *byte, hchan *chan any, elem *any) (selected bool); |
| case OSEND: |
| r.Left = mkcall1(chanfn("selectsend", 2, n.Left.Type), Types[TBOOL], &r.Ninit, var_, n.Left, n.Right) |
| |
| // selectrecv(sel *byte, hchan *chan any, elem *any) (selected bool); |
| case OSELRECV: |
| r.Left = mkcall1(chanfn("selectrecv", 2, n.Right.Left.Type), Types[TBOOL], &r.Ninit, var_, n.Right.Left, n.Left) |
| |
| // selectrecv2(sel *byte, hchan *chan any, elem *any, received *bool) (selected bool); |
| case OSELRECV2: |
| r.Left = mkcall1(chanfn("selectrecv2", 2, n.Right.Left.Type), Types[TBOOL], &r.Ninit, var_, n.Right.Left, n.Left, n.List.N) |
| } |
| } |
| |
| // selv is no longer alive after use. |
| r.Nbody = list(r.Nbody, Nod(OVARKILL, selv, nil)) |
| |
| r.Nbody = concat(r.Nbody, cas.Nbody) |
| r.Nbody = list(r.Nbody, Nod(OBREAK, nil, nil)) |
| init = list(init, r) |
| } |
| |
| // run the select |
| setlineno(sel) |
| |
| init = list(init, mkcall("selectgo", nil, nil, var_)) |
| sel.Nbody = init |
| |
| out: |
| sel.List = nil |
| walkstmtlist(sel.Nbody) |
| lineno = int32(lno) |
| } |
| |
| // Keep in sync with src/runtime/runtime2.go and src/runtime/select.go. |
| func selecttype(size int32) *Type { |
| // TODO(dvyukov): it's possible to generate SudoG and Scase only once |
| // and then cache; and also cache Select per size. |
| sudog := Nod(OTSTRUCT, nil, nil) |
| |
| sudog.List = list(sudog.List, Nod(ODCLFIELD, newname(Lookup("g")), typenod(Ptrto(Types[TUINT8])))) |
| sudog.List = list(sudog.List, Nod(ODCLFIELD, newname(Lookup("selectdone")), typenod(Ptrto(Types[TUINT8])))) |
| sudog.List = list(sudog.List, Nod(ODCLFIELD, newname(Lookup("next")), typenod(Ptrto(Types[TUINT8])))) |
| sudog.List = list(sudog.List, Nod(ODCLFIELD, newname(Lookup("prev")), typenod(Ptrto(Types[TUINT8])))) |
| sudog.List = list(sudog.List, Nod(ODCLFIELD, newname(Lookup("elem")), typenod(Ptrto(Types[TUINT8])))) |
| sudog.List = list(sudog.List, Nod(ODCLFIELD, newname(Lookup("releasetime")), typenod(Types[TUINT64]))) |
| sudog.List = list(sudog.List, Nod(ODCLFIELD, newname(Lookup("nrelease")), typenod(Types[TINT32]))) |
| sudog.List = list(sudog.List, Nod(ODCLFIELD, newname(Lookup("waitlink")), typenod(Ptrto(Types[TUINT8])))) |
| typecheck(&sudog, Etype) |
| sudog.Type.Noalg = true |
| sudog.Type.Local = true |
| |
| scase := Nod(OTSTRUCT, nil, nil) |
| scase.List = list(scase.List, Nod(ODCLFIELD, newname(Lookup("elem")), typenod(Ptrto(Types[TUINT8])))) |
| scase.List = list(scase.List, Nod(ODCLFIELD, newname(Lookup("chan")), typenod(Ptrto(Types[TUINT8])))) |
| scase.List = list(scase.List, Nod(ODCLFIELD, newname(Lookup("pc")), typenod(Types[TUINTPTR]))) |
| scase.List = list(scase.List, Nod(ODCLFIELD, newname(Lookup("kind")), typenod(Types[TUINT16]))) |
| scase.List = list(scase.List, Nod(ODCLFIELD, newname(Lookup("so")), typenod(Types[TUINT16]))) |
| scase.List = list(scase.List, Nod(ODCLFIELD, newname(Lookup("receivedp")), typenod(Ptrto(Types[TUINT8])))) |
| scase.List = list(scase.List, Nod(ODCLFIELD, newname(Lookup("releasetime")), typenod(Types[TUINT64]))) |
| typecheck(&scase, Etype) |
| scase.Type.Noalg = true |
| scase.Type.Local = true |
| |
| sel := Nod(OTSTRUCT, nil, nil) |
| sel.List = list(sel.List, Nod(ODCLFIELD, newname(Lookup("tcase")), typenod(Types[TUINT16]))) |
| sel.List = list(sel.List, Nod(ODCLFIELD, newname(Lookup("ncase")), typenod(Types[TUINT16]))) |
| sel.List = list(sel.List, Nod(ODCLFIELD, newname(Lookup("pollorder")), typenod(Ptrto(Types[TUINT8])))) |
| sel.List = list(sel.List, Nod(ODCLFIELD, newname(Lookup("lockorder")), typenod(Ptrto(Types[TUINT8])))) |
| arr := Nod(OTARRAY, Nodintconst(int64(size)), scase) |
| sel.List = list(sel.List, Nod(ODCLFIELD, newname(Lookup("scase")), arr)) |
| arr = Nod(OTARRAY, Nodintconst(int64(size)), typenod(Ptrto(Types[TUINT8]))) |
| sel.List = list(sel.List, Nod(ODCLFIELD, newname(Lookup("lockorderarr")), arr)) |
| arr = Nod(OTARRAY, Nodintconst(int64(size)), typenod(Types[TUINT16])) |
| sel.List = list(sel.List, Nod(ODCLFIELD, newname(Lookup("pollorderarr")), arr)) |
| typecheck(&sel, Etype) |
| sel.Type.Noalg = true |
| sel.Type.Local = true |
| |
| return sel.Type |
| } |
