| // Copyright 2018 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| //go:build ppc64 || ppc64le |
| // +build ppc64 ppc64le |
| |
| #include "go_asm.h" |
| #include "textflag.h" |
| |
| TEXT ·Compare(SB),NOSPLIT|NOFRAME,$0-56 |
| MOVD a_base+0(FP), R5 |
| MOVD b_base+24(FP), R6 |
| MOVD a_len+8(FP), R3 |
| CMP R5,R6,CR7 |
| MOVD b_len+32(FP), R4 |
| MOVD $ret+48(FP), R7 |
| CMP R3,R4,CR6 |
| BEQ CR7,equal |
| |
| #ifdef GOARCH_ppc64le |
| BR cmpbodyLE<>(SB) |
| #else |
| BR cmpbodyBE<>(SB) |
| #endif |
| |
| equal: |
| BEQ CR6,done |
| MOVD $1, R8 |
| BGT CR6,greater |
| NEG R8 |
| |
| greater: |
| MOVD R8, (R7) |
| RET |
| |
| done: |
| MOVD $0, (R7) |
| RET |
| |
| TEXT runtime·cmpstring(SB),NOSPLIT|NOFRAME,$0-40 |
| MOVD a_base+0(FP), R5 |
| MOVD b_base+16(FP), R6 |
| MOVD a_len+8(FP), R3 |
| CMP R5,R6,CR7 |
| MOVD b_len+24(FP), R4 |
| MOVD $ret+32(FP), R7 |
| CMP R3,R4,CR6 |
| BEQ CR7,equal |
| |
| #ifdef GOARCH_ppc64le |
| BR cmpbodyLE<>(SB) |
| #else |
| BR cmpbodyBE<>(SB) |
| #endif |
| |
| equal: |
| BEQ CR6,done |
| MOVD $1, R8 |
| BGT CR6,greater |
| NEG R8 |
| |
| greater: |
| MOVD R8, (R7) |
| RET |
| |
| done: |
| MOVD $0, (R7) |
| RET |
| |
| // Do an efficient memcmp for ppc64le |
| // R3 = a len |
| // R4 = b len |
| // R5 = a addr |
| // R6 = b addr |
| // R7 = addr of return value |
| TEXT cmpbodyLE<>(SB),NOSPLIT|NOFRAME,$0-0 |
| MOVD R3,R8 // set up length |
| CMP R3,R4,CR2 // unequal? |
| BC 12,8,setuplen // BLT CR2 |
| MOVD R4,R8 // use R4 for comparison len |
| setuplen: |
| MOVD R8,CTR // set up loop counter |
| CMP R8,$8 // only optimize >=8 |
| BLT simplecheck |
| DCBT (R5) // cache hint |
| DCBT (R6) |
| CMP R8,$32 // optimize >= 32 |
| MOVD R8,R9 |
| BLT setup8a // 8 byte moves only |
| setup32a: |
| SRADCC $5,R8,R9 // number of 32 byte chunks |
| MOVD R9,CTR |
| |
| // Special processing for 32 bytes or longer. |
| // Loading this way is faster and correct as long as the |
| // doublewords being compared are equal. Once they |
| // are found unequal, reload them in proper byte order |
| // to determine greater or less than. |
| loop32a: |
| MOVD 0(R5),R9 // doublewords to compare |
| MOVD 0(R6),R10 // get 4 doublewords |
| MOVD 8(R5),R14 |
| MOVD 8(R6),R15 |
| CMPU R9,R10 // bytes equal? |
| MOVD $0,R16 // set up for cmpne |
| BNE cmpne // further compare for LT or GT |
| MOVD 16(R5),R9 // get next pair of doublewords |
| MOVD 16(R6),R10 |
| CMPU R14,R15 // bytes match? |
| MOVD $8,R16 // set up for cmpne |
| BNE cmpne // further compare for LT or GT |
| MOVD 24(R5),R14 // get next pair of doublewords |
| MOVD 24(R6),R15 |
| CMPU R9,R10 // bytes match? |
| MOVD $16,R16 // set up for cmpne |
| BNE cmpne // further compare for LT or GT |
| MOVD $-8,R16 // for cmpne, R5,R6 already inc by 32 |
| ADD $32,R5 // bump up to next 32 |
| ADD $32,R6 |
| CMPU R14,R15 // bytes match? |
| BC 8,2,loop32a // br ctr and cr |
| BNE cmpne |
| ANDCC $24,R8,R9 // Any 8 byte chunks? |
| BEQ leftover // and result is 0 |
| setup8a: |
| SRADCC $3,R9,R9 // get the 8 byte count |
| BEQ leftover // shifted value is 0 |
| MOVD R9,CTR // loop count for doublewords |
| loop8: |
| MOVDBR (R5+R0),R9 // doublewords to compare |
| MOVDBR (R6+R0),R10 // LE compare order |
| ADD $8,R5 |
| ADD $8,R6 |
| CMPU R9,R10 // match? |
| BC 8,2,loop8 // bt ctr <> 0 && cr |
| BGT greater |
| BLT less |
| leftover: |
| ANDCC $7,R8,R9 // check for leftover bytes |
| MOVD R9,CTR // save the ctr |
| BNE simple // leftover bytes |
| BC 12,10,equal // test CR2 for length comparison |
| BC 12,8,less |
| BR greater |
| simplecheck: |
| CMP R8,$0 // remaining compare length 0 |
| BNE simple // do simple compare |
| BC 12,10,equal // test CR2 for length comparison |
| BC 12,8,less // 1st len < 2nd len, result less |
| BR greater // 1st len > 2nd len must be greater |
| simple: |
| MOVBZ 0(R5), R9 // get byte from 1st operand |
| ADD $1,R5 |
| MOVBZ 0(R6), R10 // get byte from 2nd operand |
| ADD $1,R6 |
| CMPU R9, R10 |
| BC 8,2,simple // bc ctr <> 0 && cr |
| BGT greater // 1st > 2nd |
| BLT less // 1st < 2nd |
| BC 12,10,equal // test CR2 for length comparison |
| BC 12,9,greater // 2nd len > 1st len |
| BR less // must be less |
| cmpne: // only here is not equal |
| MOVDBR (R5+R16),R8 // reload in reverse order |
| MOVDBR (R6+R16),R9 |
| CMPU R8,R9 // compare correct endianness |
| BGT greater // here only if NE |
| less: |
| MOVD $-1,R3 |
| MOVD R3,(R7) // return value if A < B |
| RET |
| equal: |
| MOVD $0,(R7) // return value if A == B |
| RET |
| greater: |
| MOVD $1,R3 |
| MOVD R3,(R7) // return value if A > B |
| RET |
| |
| // Do an efficient memcmp for ppc64 (BE) |
| // R3 = a len |
| // R4 = b len |
| // R5 = a addr |
| // R6 = b addr |
| // R7 = addr of return value |
| TEXT cmpbodyBE<>(SB),NOSPLIT|NOFRAME,$0-0 |
| MOVD R3,R8 // set up length |
| CMP R3,R4,CR2 // unequal? |
| BC 12,8,setuplen // BLT CR2 |
| MOVD R4,R8 // use R4 for comparison len |
| setuplen: |
| MOVD R8,CTR // set up loop counter |
| CMP R8,$8 // only optimize >=8 |
| BLT simplecheck |
| DCBT (R5) // cache hint |
| DCBT (R6) |
| CMP R8,$32 // optimize >= 32 |
| MOVD R8,R9 |
| BLT setup8a // 8 byte moves only |
| |
| setup32a: |
| SRADCC $5,R8,R9 // number of 32 byte chunks |
| MOVD R9,CTR |
| loop32a: |
| MOVD 0(R5),R9 // doublewords to compare |
| MOVD 0(R6),R10 // get 4 doublewords |
| MOVD 8(R5),R14 |
| MOVD 8(R6),R15 |
| CMPU R9,R10 // bytes equal? |
| BLT less // found to be less |
| BGT greater // found to be greater |
| MOVD 16(R5),R9 // get next pair of doublewords |
| MOVD 16(R6),R10 |
| CMPU R14,R15 // bytes match? |
| BLT less // found less |
| BGT greater // found greater |
| MOVD 24(R5),R14 // get next pair of doublewords |
| MOVD 24(R6),R15 |
| CMPU R9,R10 // bytes match? |
| BLT less // found to be less |
| BGT greater // found to be greater |
| ADD $32,R5 // bump up to next 32 |
| ADD $32,R6 |
| CMPU R14,R15 // bytes match? |
| BC 8,2,loop32a // br ctr and cr |
| BLT less // with BE, byte ordering is |
| BGT greater // good for compare |
| ANDCC $24,R8,R9 // Any 8 byte chunks? |
| BEQ leftover // and result is 0 |
| setup8a: |
| SRADCC $3,R9,R9 // get the 8 byte count |
| BEQ leftover // shifted value is 0 |
| MOVD R9,CTR // loop count for doublewords |
| loop8: |
| MOVD (R5),R9 |
| MOVD (R6),R10 |
| ADD $8,R5 |
| ADD $8,R6 |
| CMPU R9,R10 // match? |
| BC 8,2,loop8 // bt ctr <> 0 && cr |
| BGT greater |
| BLT less |
| leftover: |
| ANDCC $7,R8,R9 // check for leftover bytes |
| MOVD R9,CTR // save the ctr |
| BNE simple // leftover bytes |
| BC 12,10,equal // test CR2 for length comparison |
| BC 12,8,less |
| BR greater |
| simplecheck: |
| CMP R8,$0 // remaining compare length 0 |
| BNE simple // do simple compare |
| BC 12,10,equal // test CR2 for length comparison |
| BC 12,8,less // 1st len < 2nd len, result less |
| BR greater // same len, must be equal |
| simple: |
| MOVBZ 0(R5),R9 // get byte from 1st operand |
| ADD $1,R5 |
| MOVBZ 0(R6),R10 // get byte from 2nd operand |
| ADD $1,R6 |
| CMPU R9,R10 |
| BC 8,2,simple // bc ctr <> 0 && cr |
| BGT greater // 1st > 2nd |
| BLT less // 1st < 2nd |
| BC 12,10,equal // test CR2 for length comparison |
| BC 12,9,greater // 2nd len > 1st len |
| less: |
| MOVD $-1,R3 |
| MOVD R3,(R7) // return value if A < B |
| RET |
| equal: |
| MOVD $0,(R7) // return value if A == B |
| RET |
| greater: |
| MOVD $1,R3 |
| MOVD R3,(R7) // return value if A > B |
| RET |
