| // Copyright 2016 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // +build ignore |
| |
| package main |
| |
| import "strings" |
| |
| // Notes: |
| // - Integer types live in the low portion of registers. Upper portions are junk. |
| // - Boolean types use the low-order byte of a register. 0=false, 1=true. |
| // Upper bytes are junk. |
| // - When doing sub-register operations, we try to write the whole |
| // destination register to avoid a partial-register write. |
| // - Unused portions of AuxInt (or the Val portion of ValAndOff) are |
| // filled by sign-extending the used portion. Users of AuxInt which interpret |
| // AuxInt as unsigned (e.g. shifts) must be careful. |
| // - The SB 'register' is implemented using instruction-relative addressing. This |
| // places some limitations on when and how memory operands that are addressed |
| // relative to SB can be used: |
| // |
| // 1. Pseudo-instructions do not always map to a single machine instruction when |
| // using the SB 'register' to address data. This is because many machine |
| // instructions do not have relative long (RL suffix) equivalents. For example, |
| // ADDload, which is assembled as AG. |
| // |
| // 2. Loads and stores using relative addressing require the data be aligned |
| // according to its size (8-bytes for double words, 4-bytes for words |
| // and so on). |
| // |
| // We can always work around these by inserting LARL instructions (load address |
| // relative long) in the assembler, but typically this results in worse code |
| // generation because the address can't be re-used. Inserting instructions in the |
| // assembler also means clobbering the temp register and it is a long-term goal |
| // to prevent the compiler doing this so that it can be allocated as a normal |
| // register. |
| // |
| // For more information about the z/Architecture, the instruction set and the |
| // addressing modes it supports take a look at the z/Architecture Principles of |
| // Operation: http://publibfp.boulder.ibm.com/epubs/pdf/dz9zr010.pdf |
| // |
| // Suffixes encode the bit width of pseudo-instructions. |
| // D (double word) = 64 bit (frequently omitted) |
| // W (word) = 32 bit |
| // H (half word) = 16 bit |
| // B (byte) = 8 bit |
| // S (single prec.) = 32 bit (double precision is omitted) |
| |
| // copied from ../../s390x/reg.go |
| var regNamesS390X = []string{ |
| "R0", |
| "R1", |
| "R2", |
| "R3", |
| "R4", |
| "R5", |
| "R6", |
| "R7", |
| "R8", |
| "R9", |
| "R10", |
| "R11", |
| "R12", |
| "g", // R13 |
| "R14", |
| "SP", // R15 |
| "F0", |
| "F1", |
| "F2", |
| "F3", |
| "F4", |
| "F5", |
| "F6", |
| "F7", |
| "F8", |
| "F9", |
| "F10", |
| "F11", |
| "F12", |
| "F13", |
| "F14", |
| "F15", |
| |
| // If you add registers, update asyncPreempt in runtime. |
| |
| //pseudo-registers |
| "SB", |
| } |
| |
| func init() { |
| // Make map from reg names to reg integers. |
| if len(regNamesS390X) > 64 { |
| panic("too many registers") |
| } |
| num := map[string]int{} |
| for i, name := range regNamesS390X { |
| num[name] = i |
| } |
| buildReg := func(s string) regMask { |
| m := regMask(0) |
| for _, r := range strings.Split(s, " ") { |
| if n, ok := num[r]; ok { |
| m |= regMask(1) << uint(n) |
| continue |
| } |
| panic("register " + r + " not found") |
| } |
| return m |
| } |
| |
| // Common individual register masks |
| var ( |
| sp = buildReg("SP") |
| sb = buildReg("SB") |
| r0 = buildReg("R0") |
| tmp = buildReg("R11") // R11 is used as a temporary in a small number of instructions. |
| |
| // R10 is reserved by the assembler. |
| gp = buildReg("R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 R11 R12 R14") |
| gpg = gp | buildReg("g") |
| gpsp = gp | sp |
| |
| // R0 is considered to contain the value 0 in address calculations. |
| ptr = gp &^ r0 |
| ptrsp = ptr | sp |
| ptrspsb = ptrsp | sb |
| |
| fp = buildReg("F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15") |
| callerSave = gp | fp | buildReg("g") // runtime.setg (and anything calling it) may clobber g |
| r1 = buildReg("R1") |
| r2 = buildReg("R2") |
| r3 = buildReg("R3") |
| ) |
| // Common slices of register masks |
| var ( |
| gponly = []regMask{gp} |
| fponly = []regMask{fp} |
| ) |
| |
| // Common regInfo |
| var ( |
| gp01 = regInfo{inputs: []regMask{}, outputs: gponly} |
| gp11 = regInfo{inputs: []regMask{gp}, outputs: gponly} |
| gp11sp = regInfo{inputs: []regMask{gpsp}, outputs: gponly} |
| gp21 = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} |
| gp21sp = regInfo{inputs: []regMask{gpsp, gp}, outputs: gponly} |
| gp21tmp = regInfo{inputs: []regMask{gp &^ tmp, gp &^ tmp}, outputs: []regMask{gp &^ tmp}, clobbers: tmp} |
| |
| // R0 evaluates to 0 when used as the number of bits to shift |
| // so we need to exclude it from that operand. |
| sh21 = regInfo{inputs: []regMask{gp, ptr}, outputs: gponly} |
| |
| addr = regInfo{inputs: []regMask{sp | sb}, outputs: gponly} |
| addridx = regInfo{inputs: []regMask{sp | sb, ptrsp}, outputs: gponly} |
| |
| gp2flags = regInfo{inputs: []regMask{gpsp, gpsp}} |
| gp1flags = regInfo{inputs: []regMask{gpsp}} |
| gp2flags1 = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} |
| gp11flags = regInfo{inputs: []regMask{gp}, outputs: gponly} |
| gp21flags = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} |
| gp2flags1flags = regInfo{inputs: []regMask{gp, gp}, outputs: gponly} |
| |
| gpload = regInfo{inputs: []regMask{ptrspsb, 0}, outputs: gponly} |
| gploadidx = regInfo{inputs: []regMask{ptrspsb, ptrsp, 0}, outputs: gponly} |
| gpopload = regInfo{inputs: []regMask{gp, ptrsp, 0}, outputs: gponly} |
| gpstore = regInfo{inputs: []regMask{ptrspsb, gpsp, 0}} |
| gpstoreconst = regInfo{inputs: []regMask{ptrspsb, 0}} |
| gpstoreidx = regInfo{inputs: []regMask{ptrsp, ptrsp, gpsp, 0}} |
| gpstorebr = regInfo{inputs: []regMask{ptrsp, gpsp, 0}} |
| gpstorelaa = regInfo{inputs: []regMask{ptrspsb, gpsp, 0}, outputs: gponly} |
| gpstorelab = regInfo{inputs: []regMask{r1, gpsp, 0}, clobbers: r1} |
| |
| gpmvc = regInfo{inputs: []regMask{ptrsp, ptrsp, 0}} |
| |
| fp01 = regInfo{inputs: []regMask{}, outputs: fponly} |
| fp21 = regInfo{inputs: []regMask{fp, fp}, outputs: fponly} |
| fp31 = regInfo{inputs: []regMask{fp, fp, fp}, outputs: fponly} |
| fp21clobber = regInfo{inputs: []regMask{fp, fp}, outputs: fponly} |
| fpgp = regInfo{inputs: fponly, outputs: gponly} |
| gpfp = regInfo{inputs: gponly, outputs: fponly} |
| fp11 = regInfo{inputs: fponly, outputs: fponly} |
| fp1flags = regInfo{inputs: []regMask{fp}} |
| fp11clobber = regInfo{inputs: fponly, outputs: fponly} |
| fp2flags = regInfo{inputs: []regMask{fp, fp}} |
| |
| fpload = regInfo{inputs: []regMask{ptrspsb, 0}, outputs: fponly} |
| fploadidx = regInfo{inputs: []regMask{ptrsp, ptrsp, 0}, outputs: fponly} |
| |
| fpstore = regInfo{inputs: []regMask{ptrspsb, fp, 0}} |
| fpstoreidx = regInfo{inputs: []regMask{ptrsp, ptrsp, fp, 0}} |
| |
| sync = regInfo{inputs: []regMask{0}} |
| |
| // LoweredAtomicCas may overwrite arg1, so force it to R0 for now. |
| cas = regInfo{inputs: []regMask{ptrsp, r0, gpsp, 0}, outputs: []regMask{gp, 0}, clobbers: r0} |
| |
| // LoweredAtomicExchange overwrites the output before executing |
| // CS{,G}, so the output register must not be the same as the |
| // input register. For now we just force the output register to |
| // R0. |
| exchange = regInfo{inputs: []regMask{ptrsp, gpsp &^ r0, 0}, outputs: []regMask{r0, 0}} |
| ) |
| |
| var S390Xops = []opData{ |
| // fp ops |
| {name: "FADDS", argLength: 2, reg: fp21clobber, typ: "(Float32,Flags)", asm: "FADDS", commutative: true, resultInArg0: true}, // fp32 arg0 + arg1 |
| {name: "FADD", argLength: 2, reg: fp21clobber, typ: "(Float64,Flags)", asm: "FADD", commutative: true, resultInArg0: true}, // fp64 arg0 + arg1 |
| {name: "FSUBS", argLength: 2, reg: fp21clobber, typ: "(Float32,Flags)", asm: "FSUBS", resultInArg0: true}, // fp32 arg0 - arg1 |
| {name: "FSUB", argLength: 2, reg: fp21clobber, typ: "(Float64,Flags)", asm: "FSUB", resultInArg0: true}, // fp64 arg0 - arg1 |
| {name: "FMULS", argLength: 2, reg: fp21, asm: "FMULS", commutative: true, resultInArg0: true}, // fp32 arg0 * arg1 |
| {name: "FMUL", argLength: 2, reg: fp21, asm: "FMUL", commutative: true, resultInArg0: true}, // fp64 arg0 * arg1 |
| {name: "FDIVS", argLength: 2, reg: fp21, asm: "FDIVS", resultInArg0: true}, // fp32 arg0 / arg1 |
| {name: "FDIV", argLength: 2, reg: fp21, asm: "FDIV", resultInArg0: true}, // fp64 arg0 / arg1 |
| {name: "FNEGS", argLength: 1, reg: fp11clobber, asm: "FNEGS", clobberFlags: true}, // fp32 -arg0 |
| {name: "FNEG", argLength: 1, reg: fp11clobber, asm: "FNEG", clobberFlags: true}, // fp64 -arg0 |
| {name: "FMADDS", argLength: 3, reg: fp31, asm: "FMADDS", resultInArg0: true}, // fp32 arg1 * arg2 + arg0 |
| {name: "FMADD", argLength: 3, reg: fp31, asm: "FMADD", resultInArg0: true}, // fp64 arg1 * arg2 + arg0 |
| {name: "FMSUBS", argLength: 3, reg: fp31, asm: "FMSUBS", resultInArg0: true}, // fp32 arg1 * arg2 - arg0 |
| {name: "FMSUB", argLength: 3, reg: fp31, asm: "FMSUB", resultInArg0: true}, // fp64 arg1 * arg2 - arg0 |
| {name: "LPDFR", argLength: 1, reg: fp11, asm: "LPDFR"}, // fp64/fp32 set sign bit |
| {name: "LNDFR", argLength: 1, reg: fp11, asm: "LNDFR"}, // fp64/fp32 clear sign bit |
| {name: "CPSDR", argLength: 2, reg: fp21, asm: "CPSDR"}, // fp64/fp32 copy arg1 sign bit to arg0 |
| |
| // Round to integer, float64 only. |
| // |
| // aux | rounding mode |
| // ----+----------------------------------- |
| // 1 | round to nearest, ties away from 0 |
| // 4 | round to nearest, ties to even |
| // 5 | round toward 0 |
| // 6 | round toward +∞ |
| // 7 | round toward -∞ |
| {name: "FIDBR", argLength: 1, reg: fp11, asm: "FIDBR", aux: "Int8"}, |
| |
| {name: "FMOVSload", argLength: 2, reg: fpload, asm: "FMOVS", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // fp32 load |
| {name: "FMOVDload", argLength: 2, reg: fpload, asm: "FMOVD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // fp64 load |
| {name: "FMOVSconst", reg: fp01, asm: "FMOVS", aux: "Float32", rematerializeable: true}, // fp32 constant |
| {name: "FMOVDconst", reg: fp01, asm: "FMOVD", aux: "Float64", rematerializeable: true}, // fp64 constant |
| {name: "FMOVSloadidx", argLength: 3, reg: fploadidx, asm: "FMOVS", aux: "SymOff", symEffect: "Read"}, // fp32 load indexed by i |
| {name: "FMOVDloadidx", argLength: 3, reg: fploadidx, asm: "FMOVD", aux: "SymOff", symEffect: "Read"}, // fp64 load indexed by i |
| |
| {name: "FMOVSstore", argLength: 3, reg: fpstore, asm: "FMOVS", aux: "SymOff", faultOnNilArg0: true, symEffect: "Write"}, // fp32 store |
| {name: "FMOVDstore", argLength: 3, reg: fpstore, asm: "FMOVD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Write"}, // fp64 store |
| {name: "FMOVSstoreidx", argLength: 4, reg: fpstoreidx, asm: "FMOVS", aux: "SymOff", symEffect: "Write"}, // fp32 indexed by i store |
| {name: "FMOVDstoreidx", argLength: 4, reg: fpstoreidx, asm: "FMOVD", aux: "SymOff", symEffect: "Write"}, // fp64 indexed by i store |
| |
| // binary ops |
| {name: "ADD", argLength: 2, reg: gp21sp, asm: "ADD", commutative: true, clobberFlags: true}, // arg0 + arg1 |
| {name: "ADDW", argLength: 2, reg: gp21sp, asm: "ADDW", commutative: true, clobberFlags: true}, // arg0 + arg1 |
| {name: "ADDconst", argLength: 1, reg: gp11sp, asm: "ADD", aux: "Int32", typ: "UInt64", clobberFlags: true}, // arg0 + auxint |
| {name: "ADDWconst", argLength: 1, reg: gp11sp, asm: "ADDW", aux: "Int32", clobberFlags: true}, // arg0 + auxint |
| {name: "ADDload", argLength: 3, reg: gpopload, asm: "ADD", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 + *arg1. arg2=mem |
| {name: "ADDWload", argLength: 3, reg: gpopload, asm: "ADDW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 + *arg1. arg2=mem |
| |
| {name: "SUB", argLength: 2, reg: gp21, asm: "SUB", clobberFlags: true}, // arg0 - arg1 |
| {name: "SUBW", argLength: 2, reg: gp21, asm: "SUBW", clobberFlags: true}, // arg0 - arg1 |
| {name: "SUBconst", argLength: 1, reg: gp11, asm: "SUB", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 - auxint |
| {name: "SUBWconst", argLength: 1, reg: gp11, asm: "SUBW", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 - auxint |
| {name: "SUBload", argLength: 3, reg: gpopload, asm: "SUB", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 - *arg1. arg2=mem |
| {name: "SUBWload", argLength: 3, reg: gpopload, asm: "SUBW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 - *arg1. arg2=mem |
| |
| {name: "MULLD", argLength: 2, reg: gp21, asm: "MULLD", typ: "Int64", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 * arg1 |
| {name: "MULLW", argLength: 2, reg: gp21, asm: "MULLW", typ: "Int32", commutative: true, resultInArg0: true, clobberFlags: true}, // arg0 * arg1 |
| {name: "MULLDconst", argLength: 1, reg: gp11, asm: "MULLD", aux: "Int32", typ: "Int64", resultInArg0: true, clobberFlags: true}, // arg0 * auxint |
| {name: "MULLWconst", argLength: 1, reg: gp11, asm: "MULLW", aux: "Int32", typ: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 * auxint |
| {name: "MULLDload", argLength: 3, reg: gpopload, asm: "MULLD", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 * *arg1. arg2=mem |
| {name: "MULLWload", argLength: 3, reg: gpopload, asm: "MULLW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 * *arg1. arg2=mem |
| |
| {name: "MULHD", argLength: 2, reg: gp21tmp, asm: "MULHD", typ: "Int64", commutative: true, resultInArg0: true, clobberFlags: true}, // (arg0 * arg1) >> width |
| {name: "MULHDU", argLength: 2, reg: gp21tmp, asm: "MULHDU", typ: "Int64", commutative: true, resultInArg0: true, clobberFlags: true}, // (arg0 * arg1) >> width |
| |
| {name: "DIVD", argLength: 2, reg: gp21tmp, asm: "DIVD", resultInArg0: true, clobberFlags: true}, // arg0 / arg1 |
| {name: "DIVW", argLength: 2, reg: gp21tmp, asm: "DIVW", resultInArg0: true, clobberFlags: true}, // arg0 / arg1 |
| {name: "DIVDU", argLength: 2, reg: gp21tmp, asm: "DIVDU", resultInArg0: true, clobberFlags: true}, // arg0 / arg1 |
| {name: "DIVWU", argLength: 2, reg: gp21tmp, asm: "DIVWU", resultInArg0: true, clobberFlags: true}, // arg0 / arg1 |
| |
| {name: "MODD", argLength: 2, reg: gp21tmp, asm: "MODD", resultInArg0: true, clobberFlags: true}, // arg0 % arg1 |
| {name: "MODW", argLength: 2, reg: gp21tmp, asm: "MODW", resultInArg0: true, clobberFlags: true}, // arg0 % arg1 |
| |
| {name: "MODDU", argLength: 2, reg: gp21tmp, asm: "MODDU", resultInArg0: true, clobberFlags: true}, // arg0 % arg1 |
| {name: "MODWU", argLength: 2, reg: gp21tmp, asm: "MODWU", resultInArg0: true, clobberFlags: true}, // arg0 % arg1 |
| |
| {name: "AND", argLength: 2, reg: gp21, asm: "AND", commutative: true, clobberFlags: true}, // arg0 & arg1 |
| {name: "ANDW", argLength: 2, reg: gp21, asm: "ANDW", commutative: true, clobberFlags: true}, // arg0 & arg1 |
| {name: "ANDconst", argLength: 1, reg: gp11, asm: "AND", aux: "Int64", resultInArg0: true, clobberFlags: true}, // arg0 & auxint |
| {name: "ANDWconst", argLength: 1, reg: gp11, asm: "ANDW", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 & auxint |
| {name: "ANDload", argLength: 3, reg: gpopload, asm: "AND", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 & *arg1. arg2=mem |
| {name: "ANDWload", argLength: 3, reg: gpopload, asm: "ANDW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 & *arg1. arg2=mem |
| |
| {name: "OR", argLength: 2, reg: gp21, asm: "OR", commutative: true, clobberFlags: true}, // arg0 | arg1 |
| {name: "ORW", argLength: 2, reg: gp21, asm: "ORW", commutative: true, clobberFlags: true}, // arg0 | arg1 |
| {name: "ORconst", argLength: 1, reg: gp11, asm: "OR", aux: "Int64", resultInArg0: true, clobberFlags: true}, // arg0 | auxint |
| {name: "ORWconst", argLength: 1, reg: gp11, asm: "ORW", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 | auxint |
| {name: "ORload", argLength: 3, reg: gpopload, asm: "OR", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 | *arg1. arg2=mem |
| {name: "ORWload", argLength: 3, reg: gpopload, asm: "ORW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 | *arg1. arg2=mem |
| |
| {name: "XOR", argLength: 2, reg: gp21, asm: "XOR", commutative: true, clobberFlags: true}, // arg0 ^ arg1 |
| {name: "XORW", argLength: 2, reg: gp21, asm: "XORW", commutative: true, clobberFlags: true}, // arg0 ^ arg1 |
| {name: "XORconst", argLength: 1, reg: gp11, asm: "XOR", aux: "Int64", resultInArg0: true, clobberFlags: true}, // arg0 ^ auxint |
| {name: "XORWconst", argLength: 1, reg: gp11, asm: "XORW", aux: "Int32", resultInArg0: true, clobberFlags: true}, // arg0 ^ auxint |
| {name: "XORload", argLength: 3, reg: gpopload, asm: "XOR", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 ^ *arg1. arg2=mem |
| {name: "XORWload", argLength: 3, reg: gpopload, asm: "XORW", aux: "SymOff", resultInArg0: true, clobberFlags: true, faultOnNilArg1: true, symEffect: "Read"}, // arg0 ^ *arg1. arg2=mem |
| |
| // Arithmetic ops with carry/borrow chain. |
| // |
| // A carry is represented by a condition code of 2 or 3 (GT or OV). |
| // A borrow is represented by a condition code of 0 or 1 (EQ or LT). |
| {name: "ADDC", argLength: 2, reg: gp21flags, asm: "ADDC", typ: "(UInt64,Flags)", commutative: true}, // (arg0 + arg1, carry out) |
| {name: "ADDCconst", argLength: 1, reg: gp11flags, asm: "ADDC", typ: "(UInt64,Flags)", aux: "Int16"}, // (arg0 + auxint, carry out) |
| {name: "ADDE", argLength: 3, reg: gp2flags1flags, asm: "ADDE", typ: "(UInt64,Flags)", commutative: true, resultInArg0: true}, // (arg0 + arg1 + arg2 (carry in), carry out) |
| {name: "SUBC", argLength: 2, reg: gp21flags, asm: "SUBC", typ: "(UInt64,Flags)"}, // (arg0 - arg1, borrow out) |
| {name: "SUBE", argLength: 3, reg: gp2flags1flags, asm: "SUBE", typ: "(UInt64,Flags)", resultInArg0: true}, // (arg0 - arg1 - arg2 (borrow in), borrow out) |
| |
| // Comparisons. |
| {name: "CMP", argLength: 2, reg: gp2flags, asm: "CMP", typ: "Flags"}, // arg0 compare to arg1 |
| {name: "CMPW", argLength: 2, reg: gp2flags, asm: "CMPW", typ: "Flags"}, // arg0 compare to arg1 |
| |
| {name: "CMPU", argLength: 2, reg: gp2flags, asm: "CMPU", typ: "Flags"}, // arg0 compare to arg1 |
| {name: "CMPWU", argLength: 2, reg: gp2flags, asm: "CMPWU", typ: "Flags"}, // arg0 compare to arg1 |
| |
| {name: "CMPconst", argLength: 1, reg: gp1flags, asm: "CMP", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint |
| {name: "CMPWconst", argLength: 1, reg: gp1flags, asm: "CMPW", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint |
| {name: "CMPUconst", argLength: 1, reg: gp1flags, asm: "CMPU", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint |
| {name: "CMPWUconst", argLength: 1, reg: gp1flags, asm: "CMPWU", typ: "Flags", aux: "Int32"}, // arg0 compare to auxint |
| |
| {name: "FCMPS", argLength: 2, reg: fp2flags, asm: "CEBR", typ: "Flags"}, // arg0 compare to arg1, f32 |
| {name: "FCMP", argLength: 2, reg: fp2flags, asm: "FCMPU", typ: "Flags"}, // arg0 compare to arg1, f64 |
| {name: "LTDBR", argLength: 1, reg: fp1flags, asm: "LTDBR", typ: "Flags"}, // arg0 compare to 0, f64 |
| {name: "LTEBR", argLength: 1, reg: fp1flags, asm: "LTEBR", typ: "Flags"}, // arg0 compare to 0, f32 |
| |
| {name: "SLD", argLength: 2, reg: sh21, asm: "SLD"}, // arg0 << arg1, shift amount is mod 64 |
| {name: "SLW", argLength: 2, reg: sh21, asm: "SLW"}, // arg0 << arg1, shift amount is mod 32 |
| {name: "SLDconst", argLength: 1, reg: gp11, asm: "SLD", aux: "Int8"}, // arg0 << auxint, shift amount 0-63 |
| {name: "SLWconst", argLength: 1, reg: gp11, asm: "SLW", aux: "Int8"}, // arg0 << auxint, shift amount 0-31 |
| |
| {name: "SRD", argLength: 2, reg: sh21, asm: "SRD"}, // unsigned arg0 >> arg1, shift amount is mod 64 |
| {name: "SRW", argLength: 2, reg: sh21, asm: "SRW"}, // unsigned uint32(arg0) >> arg1, shift amount is mod 32 |
| {name: "SRDconst", argLength: 1, reg: gp11, asm: "SRD", aux: "Int8"}, // unsigned arg0 >> auxint, shift amount 0-63 |
| {name: "SRWconst", argLength: 1, reg: gp11, asm: "SRW", aux: "Int8"}, // unsigned uint32(arg0) >> auxint, shift amount 0-31 |
| |
| // Arithmetic shifts clobber flags. |
| {name: "SRAD", argLength: 2, reg: sh21, asm: "SRAD", clobberFlags: true}, // signed arg0 >> arg1, shift amount is mod 64 |
| {name: "SRAW", argLength: 2, reg: sh21, asm: "SRAW", clobberFlags: true}, // signed int32(arg0) >> arg1, shift amount is mod 32 |
| {name: "SRADconst", argLength: 1, reg: gp11, asm: "SRAD", aux: "Int8", clobberFlags: true}, // signed arg0 >> auxint, shift amount 0-63 |
| {name: "SRAWconst", argLength: 1, reg: gp11, asm: "SRAW", aux: "Int8", clobberFlags: true}, // signed int32(arg0) >> auxint, shift amount 0-31 |
| |
| {name: "RLLG", argLength: 2, reg: sh21, asm: "RLLG"}, // arg0 rotate left arg1, rotate amount 0-63 |
| {name: "RLL", argLength: 2, reg: sh21, asm: "RLL"}, // arg0 rotate left arg1, rotate amount 0-31 |
| {name: "RLLGconst", argLength: 1, reg: gp11, asm: "RLLG", aux: "Int8"}, // arg0 rotate left auxint, rotate amount 0-63 |
| {name: "RLLconst", argLength: 1, reg: gp11, asm: "RLL", aux: "Int8"}, // arg0 rotate left auxint, rotate amount 0-31 |
| |
| // Rotate then (and|or|xor|insert) selected bits instructions. |
| // |
| // Aux is an s390x.RotateParams struct containing Start, End and rotation |
| // Amount fields. |
| // |
| // arg1 is rotated left by the rotation amount then the bits from the start |
| // bit to the end bit (inclusive) are combined with arg0 using the logical |
| // operation specified. Bit indices are specified from left to right - the |
| // MSB is 0 and the LSB is 63. |
| // |
| // Examples: |
| // | aux | |
| // | instruction | start | end | amount | arg0 | arg1 | result | |
| // +-------------+-------+-----+--------+-----------------------+-----------------------+-----------------------+ |
| // | RXSBG (XOR) | 0 | 1 | 0 | 0xffff_ffff_ffff_ffff | 0xffff_ffff_ffff_ffff | 0x3fff_ffff_ffff_ffff | |
| // | RXSBG (XOR) | 62 | 63 | 0 | 0xffff_ffff_ffff_ffff | 0xffff_ffff_ffff_ffff | 0xffff_ffff_ffff_fffc | |
| // | RXSBG (XOR) | 0 | 47 | 16 | 0xffff_ffff_ffff_ffff | 0x0000_0000_0000_ffff | 0xffff_ffff_0000_ffff | |
| // +-------------+-------+-----+--------+-----------------------+-----------------------+-----------------------+ |
| // |
| {name: "RXSBG", argLength: 2, reg: gp21, asm: "RXSBG", resultInArg0: true, aux: "S390XRotateParams", clobberFlags: true}, // rotate then xor selected bits |
| |
| // unary ops |
| {name: "NEG", argLength: 1, reg: gp11, asm: "NEG", clobberFlags: true}, // -arg0 |
| {name: "NEGW", argLength: 1, reg: gp11, asm: "NEGW", clobberFlags: true}, // -arg0 |
| |
| {name: "NOT", argLength: 1, reg: gp11, resultInArg0: true, clobberFlags: true}, // ^arg0 |
| {name: "NOTW", argLength: 1, reg: gp11, resultInArg0: true, clobberFlags: true}, // ^arg0 |
| |
| {name: "FSQRT", argLength: 1, reg: fp11, asm: "FSQRT"}, // sqrt(arg0) |
| |
| // Conditional register-register moves. |
| // The aux for these values is an s390x.CCMask value representing the condition code mask. |
| {name: "LOCGR", argLength: 3, reg: gp2flags1, resultInArg0: true, asm: "LOCGR", aux: "S390XCCMask"}, // load arg1 into arg0 if the condition code in arg2 matches a masked bit in aux. |
| |
| {name: "MOVBreg", argLength: 1, reg: gp11sp, asm: "MOVB", typ: "Int64"}, // sign extend arg0 from int8 to int64 |
| {name: "MOVBZreg", argLength: 1, reg: gp11sp, asm: "MOVBZ", typ: "UInt64"}, // zero extend arg0 from int8 to int64 |
| {name: "MOVHreg", argLength: 1, reg: gp11sp, asm: "MOVH", typ: "Int64"}, // sign extend arg0 from int16 to int64 |
| {name: "MOVHZreg", argLength: 1, reg: gp11sp, asm: "MOVHZ", typ: "UInt64"}, // zero extend arg0 from int16 to int64 |
| {name: "MOVWreg", argLength: 1, reg: gp11sp, asm: "MOVW", typ: "Int64"}, // sign extend arg0 from int32 to int64 |
| {name: "MOVWZreg", argLength: 1, reg: gp11sp, asm: "MOVWZ", typ: "UInt64"}, // zero extend arg0 from int32 to int64 |
| |
| {name: "MOVDconst", reg: gp01, asm: "MOVD", typ: "UInt64", aux: "Int64", rematerializeable: true}, // auxint |
| |
| {name: "LDGR", argLength: 1, reg: gpfp, asm: "LDGR"}, // move int64 to float64 (no conversion) |
| {name: "LGDR", argLength: 1, reg: fpgp, asm: "LGDR"}, // move float64 to int64 (no conversion) |
| |
| {name: "CFDBRA", argLength: 1, reg: fpgp, asm: "CFDBRA", clobberFlags: true}, // convert float64 to int32 |
| {name: "CGDBRA", argLength: 1, reg: fpgp, asm: "CGDBRA", clobberFlags: true}, // convert float64 to int64 |
| {name: "CFEBRA", argLength: 1, reg: fpgp, asm: "CFEBRA", clobberFlags: true}, // convert float32 to int32 |
| {name: "CGEBRA", argLength: 1, reg: fpgp, asm: "CGEBRA", clobberFlags: true}, // convert float32 to int64 |
| {name: "CEFBRA", argLength: 1, reg: gpfp, asm: "CEFBRA", clobberFlags: true}, // convert int32 to float32 |
| {name: "CDFBRA", argLength: 1, reg: gpfp, asm: "CDFBRA", clobberFlags: true}, // convert int32 to float64 |
| {name: "CEGBRA", argLength: 1, reg: gpfp, asm: "CEGBRA", clobberFlags: true}, // convert int64 to float32 |
| {name: "CDGBRA", argLength: 1, reg: gpfp, asm: "CDGBRA", clobberFlags: true}, // convert int64 to float64 |
| {name: "CLFEBR", argLength: 1, reg: fpgp, asm: "CLFEBR", clobberFlags: true}, // convert float32 to uint32 |
| {name: "CLFDBR", argLength: 1, reg: fpgp, asm: "CLFDBR", clobberFlags: true}, // convert float64 to uint32 |
| {name: "CLGEBR", argLength: 1, reg: fpgp, asm: "CLGEBR", clobberFlags: true}, // convert float32 to uint64 |
| {name: "CLGDBR", argLength: 1, reg: fpgp, asm: "CLGDBR", clobberFlags: true}, // convert float64 to uint64 |
| {name: "CELFBR", argLength: 1, reg: gpfp, asm: "CELFBR", clobberFlags: true}, // convert uint32 to float32 |
| {name: "CDLFBR", argLength: 1, reg: gpfp, asm: "CDLFBR", clobberFlags: true}, // convert uint32 to float64 |
| {name: "CELGBR", argLength: 1, reg: gpfp, asm: "CELGBR", clobberFlags: true}, // convert uint64 to float32 |
| {name: "CDLGBR", argLength: 1, reg: gpfp, asm: "CDLGBR", clobberFlags: true}, // convert uint64 to float64 |
| |
| {name: "LEDBR", argLength: 1, reg: fp11, asm: "LEDBR"}, // convert float64 to float32 |
| {name: "LDEBR", argLength: 1, reg: fp11, asm: "LDEBR"}, // convert float32 to float64 |
| |
| {name: "MOVDaddr", argLength: 1, reg: addr, aux: "SymOff", rematerializeable: true, symEffect: "Read"}, // arg0 + auxint + offset encoded in aux |
| {name: "MOVDaddridx", argLength: 2, reg: addridx, aux: "SymOff", symEffect: "Read"}, // arg0 + arg1 + auxint + aux |
| |
| // auxint+aux == add auxint and the offset of the symbol in aux (if any) to the effective address |
| {name: "MOVBZload", argLength: 2, reg: gpload, asm: "MOVBZ", aux: "SymOff", typ: "UInt8", faultOnNilArg0: true, symEffect: "Read"}, // load byte from arg0+auxint+aux. arg1=mem. Zero extend. |
| {name: "MOVBload", argLength: 2, reg: gpload, asm: "MOVB", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 |
| {name: "MOVHZload", argLength: 2, reg: gpload, asm: "MOVHZ", aux: "SymOff", typ: "UInt16", faultOnNilArg0: true, symEffect: "Read"}, // load 2 bytes from arg0+auxint+aux. arg1=mem. Zero extend. |
| {name: "MOVHload", argLength: 2, reg: gpload, asm: "MOVH", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 |
| {name: "MOVWZload", argLength: 2, reg: gpload, asm: "MOVWZ", aux: "SymOff", typ: "UInt32", faultOnNilArg0: true, symEffect: "Read"}, // load 4 bytes from arg0+auxint+aux. arg1=mem. Zero extend. |
| {name: "MOVWload", argLength: 2, reg: gpload, asm: "MOVW", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, // ditto, sign extend to int64 |
| {name: "MOVDload", argLength: 2, reg: gpload, asm: "MOVD", aux: "SymOff", typ: "UInt64", faultOnNilArg0: true, symEffect: "Read"}, // load 8 bytes from arg0+auxint+aux. arg1=mem |
| |
| {name: "MOVWBR", argLength: 1, reg: gp11, asm: "MOVWBR"}, // arg0 swap bytes |
| {name: "MOVDBR", argLength: 1, reg: gp11, asm: "MOVDBR"}, // arg0 swap bytes |
| |
| {name: "MOVHBRload", argLength: 2, reg: gpload, asm: "MOVHBR", aux: "SymOff", typ: "UInt16", faultOnNilArg0: true, symEffect: "Read"}, // load 2 bytes from arg0+auxint+aux. arg1=mem. Reverse bytes. |
| {name: "MOVWBRload", argLength: 2, reg: gpload, asm: "MOVWBR", aux: "SymOff", typ: "UInt32", faultOnNilArg0: true, symEffect: "Read"}, // load 4 bytes from arg0+auxint+aux. arg1=mem. Reverse bytes. |
| {name: "MOVDBRload", argLength: 2, reg: gpload, asm: "MOVDBR", aux: "SymOff", typ: "UInt64", faultOnNilArg0: true, symEffect: "Read"}, // load 8 bytes from arg0+auxint+aux. arg1=mem. Reverse bytes. |
| |
| {name: "MOVBstore", argLength: 3, reg: gpstore, asm: "MOVB", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store byte in arg1 to arg0+auxint+aux. arg2=mem |
| {name: "MOVHstore", argLength: 3, reg: gpstore, asm: "MOVH", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 2 bytes in arg1 to arg0+auxint+aux. arg2=mem |
| {name: "MOVWstore", argLength: 3, reg: gpstore, asm: "MOVW", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 4 bytes in arg1 to arg0+auxint+aux. arg2=mem |
| {name: "MOVDstore", argLength: 3, reg: gpstore, asm: "MOVD", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 8 bytes in arg1 to arg0+auxint+aux. arg2=mem |
| {name: "MOVHBRstore", argLength: 3, reg: gpstorebr, asm: "MOVHBR", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 2 bytes in arg1 to arg0+auxint+aux. arg2=mem. Reverse bytes. |
| {name: "MOVWBRstore", argLength: 3, reg: gpstorebr, asm: "MOVWBR", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 4 bytes in arg1 to arg0+auxint+aux. arg2=mem. Reverse bytes. |
| {name: "MOVDBRstore", argLength: 3, reg: gpstorebr, asm: "MOVDBR", aux: "SymOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 8 bytes in arg1 to arg0+auxint+aux. arg2=mem. Reverse bytes. |
| |
| {name: "MVC", argLength: 3, reg: gpmvc, asm: "MVC", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, faultOnNilArg1: true, symEffect: "None"}, // arg0=destptr, arg1=srcptr, arg2=mem, auxint=size,off |
| |
| // indexed loads/stores |
| {name: "MOVBZloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVBZ", aux: "SymOff", typ: "UInt8", symEffect: "Read"}, // load a byte from arg0+arg1+auxint+aux. arg2=mem. Zero extend. |
| {name: "MOVBloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVB", aux: "SymOff", typ: "Int8", symEffect: "Read"}, // load a byte from arg0+arg1+auxint+aux. arg2=mem. Sign extend. |
| {name: "MOVHZloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVHZ", aux: "SymOff", typ: "UInt16", symEffect: "Read"}, // load 2 bytes from arg0+arg1+auxint+aux. arg2=mem. Zero extend. |
| {name: "MOVHloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVH", aux: "SymOff", typ: "Int16", symEffect: "Read"}, // load 2 bytes from arg0+arg1+auxint+aux. arg2=mem. Sign extend. |
| {name: "MOVWZloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVWZ", aux: "SymOff", typ: "UInt32", symEffect: "Read"}, // load 4 bytes from arg0+arg1+auxint+aux. arg2=mem. Zero extend. |
| {name: "MOVWloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVW", aux: "SymOff", typ: "Int32", symEffect: "Read"}, // load 4 bytes from arg0+arg1+auxint+aux. arg2=mem. Sign extend. |
| {name: "MOVDloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVD", aux: "SymOff", typ: "UInt64", symEffect: "Read"}, // load 8 bytes from arg0+arg1+auxint+aux. arg2=mem |
| {name: "MOVHBRloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVHBR", aux: "SymOff", typ: "Int16", symEffect: "Read"}, // load 2 bytes from arg0+arg1+auxint+aux. arg2=mem. Reverse bytes. |
| {name: "MOVWBRloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVWBR", aux: "SymOff", typ: "Int32", symEffect: "Read"}, // load 4 bytes from arg0+arg1+auxint+aux. arg2=mem. Reverse bytes. |
| {name: "MOVDBRloadidx", argLength: 3, reg: gploadidx, commutative: true, asm: "MOVDBR", aux: "SymOff", typ: "Int64", symEffect: "Read"}, // load 8 bytes from arg0+arg1+auxint+aux. arg2=mem. Reverse bytes. |
| {name: "MOVBstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVB", aux: "SymOff", symEffect: "Write"}, // store byte in arg2 to arg0+arg1+auxint+aux. arg3=mem |
| {name: "MOVHstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVH", aux: "SymOff", symEffect: "Write"}, // store 2 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem |
| {name: "MOVWstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVW", aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem |
| {name: "MOVDstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVD", aux: "SymOff", symEffect: "Write"}, // store 8 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem |
| {name: "MOVHBRstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVHBR", aux: "SymOff", symEffect: "Write"}, // store 2 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem. Reverse bytes. |
| {name: "MOVWBRstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVWBR", aux: "SymOff", symEffect: "Write"}, // store 4 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem. Reverse bytes. |
| {name: "MOVDBRstoreidx", argLength: 4, reg: gpstoreidx, commutative: true, asm: "MOVDBR", aux: "SymOff", symEffect: "Write"}, // store 8 bytes in arg2 to arg0+arg1+auxint+aux. arg3=mem. Reverse bytes. |
| |
| // For storeconst ops, the AuxInt field encodes both |
| // the value to store and an address offset of the store. |
| // Cast AuxInt to a ValAndOff to extract Val and Off fields. |
| {name: "MOVBstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVB", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low byte of ValAndOff(AuxInt).Val() to arg0+ValAndOff(AuxInt).Off()+aux. arg1=mem |
| {name: "MOVHstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVH", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low 2 bytes of ... |
| {name: "MOVWstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVW", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store low 4 bytes of ... |
| {name: "MOVDstoreconst", argLength: 2, reg: gpstoreconst, asm: "MOVD", aux: "SymValAndOff", typ: "Mem", faultOnNilArg0: true, symEffect: "Write"}, // store 8 bytes of ... |
| |
| {name: "CLEAR", argLength: 2, reg: regInfo{inputs: []regMask{ptr, 0}}, asm: "CLEAR", aux: "SymValAndOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, symEffect: "Write"}, |
| |
| {name: "CALLstatic", argLength: 1, reg: regInfo{clobbers: callerSave}, aux: "SymOff", clobberFlags: true, call: true, symEffect: "None"}, // call static function aux.(*obj.LSym). arg0=mem, auxint=argsize, returns mem |
| {name: "CALLclosure", argLength: 3, reg: regInfo{inputs: []regMask{ptrsp, buildReg("R12"), 0}, clobbers: callerSave}, aux: "Int64", clobberFlags: true, call: true}, // call function via closure. arg0=codeptr, arg1=closure, arg2=mem, auxint=argsize, returns mem |
| {name: "CALLinter", argLength: 2, reg: regInfo{inputs: []regMask{ptr}, clobbers: callerSave}, aux: "Int64", clobberFlags: true, call: true}, // call fn by pointer. arg0=codeptr, arg1=mem, auxint=argsize, returns mem |
| |
| // (InvertFlags (CMP a b)) == (CMP b a) |
| // InvertFlags is a pseudo-op which can't appear in assembly output. |
| {name: "InvertFlags", argLength: 1}, // reverse direction of arg0 |
| |
| // Pseudo-ops |
| {name: "LoweredGetG", argLength: 1, reg: gp01}, // arg0=mem |
| // Scheduler ensures LoweredGetClosurePtr occurs only in entry block, |
| // and sorts it to the very beginning of the block to prevent other |
| // use of R12 (the closure pointer) |
| {name: "LoweredGetClosurePtr", reg: regInfo{outputs: []regMask{buildReg("R12")}}, zeroWidth: true}, |
| // arg0=ptr,arg1=mem, returns void. Faults if ptr is nil. |
| // LoweredGetCallerSP returns the SP of the caller of the current function. |
| {name: "LoweredGetCallerSP", reg: gp01, rematerializeable: true}, |
| // LoweredGetCallerPC evaluates to the PC to which its "caller" will return. |
| // I.e., if f calls g "calls" getcallerpc, |
| // the result should be the PC within f that g will return to. |
| // See runtime/stubs.go for a more detailed discussion. |
| {name: "LoweredGetCallerPC", reg: gp01, rematerializeable: true}, |
| {name: "LoweredNilCheck", argLength: 2, reg: regInfo{inputs: []regMask{ptrsp}}, clobberFlags: true, nilCheck: true, faultOnNilArg0: true}, |
| // Round ops to block fused-multiply-add extraction. |
| {name: "LoweredRound32F", argLength: 1, reg: fp11, resultInArg0: true, zeroWidth: true}, |
| {name: "LoweredRound64F", argLength: 1, reg: fp11, resultInArg0: true, zeroWidth: true}, |
| |
| // LoweredWB invokes runtime.gcWriteBarrier. arg0=destptr, arg1=srcptr, arg2=mem, aux=runtime.gcWriteBarrier |
| // It saves all GP registers if necessary, |
| // but clobbers R14 (LR) because it's a call. |
| {name: "LoweredWB", argLength: 3, reg: regInfo{inputs: []regMask{buildReg("R2"), buildReg("R3")}, clobbers: (callerSave &^ gpg) | buildReg("R14")}, clobberFlags: true, aux: "Sym", symEffect: "None"}, |
| |
| // There are three of these functions so that they can have three different register inputs. |
| // When we check 0 <= c <= cap (A), then 0 <= b <= c (B), then 0 <= a <= b (C), we want the |
| // default registers to match so we don't need to copy registers around unnecessarily. |
| {name: "LoweredPanicBoundsA", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{r2, r3}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). |
| {name: "LoweredPanicBoundsB", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{r1, r2}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). |
| {name: "LoweredPanicBoundsC", argLength: 3, aux: "Int64", reg: regInfo{inputs: []regMask{r0, r1}}, typ: "Mem", call: true}, // arg0=idx, arg1=len, arg2=mem, returns memory. AuxInt contains report code (see PanicBounds in generic.go). |
| |
| // Constant condition code values. The condition code can be 0, 1, 2 or 3. |
| {name: "FlagEQ"}, // CC=0 (equal) |
| {name: "FlagLT"}, // CC=1 (less than) |
| {name: "FlagGT"}, // CC=2 (greater than) |
| {name: "FlagOV"}, // CC=3 (overflow) |
| |
| // Fast-BCR-serialization to ensure store-load ordering. |
| {name: "SYNC", argLength: 1, reg: sync, asm: "SYNC", typ: "Mem"}, |
| |
| // Atomic loads. These are just normal loads but return <value,memory> tuples |
| // so they can be properly ordered with other loads. |
| // load from arg0+auxint+aux. arg1=mem. |
| {name: "MOVBZatomicload", argLength: 2, reg: gpload, asm: "MOVBZ", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, |
| {name: "MOVWZatomicload", argLength: 2, reg: gpload, asm: "MOVWZ", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, |
| {name: "MOVDatomicload", argLength: 2, reg: gpload, asm: "MOVD", aux: "SymOff", faultOnNilArg0: true, symEffect: "Read"}, |
| |
| // Atomic stores. These are just normal stores. |
| // store arg1 to arg0+auxint+aux. arg2=mem. |
| {name: "MOVBatomicstore", argLength: 3, reg: gpstore, asm: "MOVB", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "Write"}, |
| {name: "MOVWatomicstore", argLength: 3, reg: gpstore, asm: "MOVW", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "Write"}, |
| {name: "MOVDatomicstore", argLength: 3, reg: gpstore, asm: "MOVD", aux: "SymOff", typ: "Mem", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "Write"}, |
| |
| // Atomic adds. |
| // *(arg0+auxint+aux) += arg1. arg2=mem. |
| // Returns a tuple of <old contents of *(arg0+auxint+aux), memory>. |
| {name: "LAA", argLength: 3, reg: gpstorelaa, asm: "LAA", typ: "(UInt32,Mem)", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "LAAG", argLength: 3, reg: gpstorelaa, asm: "LAAG", typ: "(UInt64,Mem)", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "AddTupleFirst32", argLength: 2}, // arg1=tuple <x,y>. Returns <x+arg0,y>. |
| {name: "AddTupleFirst64", argLength: 2}, // arg1=tuple <x,y>. Returns <x+arg0,y>. |
| |
| // Atomic bitwise operations. |
| // Note: 'floor' operations round the pointer down to the nearest word boundary |
| // which reflects how they are used in the runtime. |
| {name: "LAOfloor", argLength: 3, reg: gpstorelab, asm: "LAO", typ: "Mem", clobberFlags: true, hasSideEffects: true}, // *(floor(arg0, 4)) |= arg1. arg2 = mem. |
| {name: "LANfloor", argLength: 3, reg: gpstorelab, asm: "LAN", typ: "Mem", clobberFlags: true, hasSideEffects: true}, // *(floor(arg0, 4)) &= arg1. arg2 = mem. |
| |
| // Compare and swap. |
| // arg0 = pointer, arg1 = old value, arg2 = new value, arg3 = memory. |
| // if *(arg0+auxint+aux) == arg1 { |
| // *(arg0+auxint+aux) = arg2 |
| // return (true, memory) |
| // } else { |
| // return (false, memory) |
| // } |
| // Note that these instructions also return the old value in arg1, but we ignore it. |
| // TODO: have these return flags instead of bool. The current system generates: |
| // CS ... |
| // MOVD $0, ret |
| // BNE 2(PC) |
| // MOVD $1, ret |
| // CMPW ret, $0 |
| // BNE ... |
| // instead of just |
| // CS ... |
| // BEQ ... |
| // but we can't do that because memory-using ops can't generate flags yet |
| // (flagalloc wants to move flag-generating instructions around). |
| {name: "LoweredAtomicCas32", argLength: 4, reg: cas, asm: "CS", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "LoweredAtomicCas64", argLength: 4, reg: cas, asm: "CSG", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, |
| |
| // Lowered atomic swaps, emulated using compare-and-swap. |
| // store arg1 to arg0+auxint+aux, arg2=mem. |
| {name: "LoweredAtomicExchange32", argLength: 3, reg: exchange, asm: "CS", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, |
| {name: "LoweredAtomicExchange64", argLength: 3, reg: exchange, asm: "CSG", aux: "SymOff", clobberFlags: true, faultOnNilArg0: true, hasSideEffects: true, symEffect: "RdWr"}, |
| |
| // find leftmost one |
| { |
| name: "FLOGR", |
| argLength: 1, |
| reg: regInfo{inputs: gponly, outputs: []regMask{buildReg("R0")}, clobbers: buildReg("R1")}, |
| asm: "FLOGR", |
| typ: "UInt64", |
| clobberFlags: true, |
| }, |
| |
| // population count |
| // |
| // Counts the number of ones in each byte of arg0 |
| // and places the result into the corresponding byte |
| // of the result. |
| { |
| name: "POPCNT", |
| argLength: 1, |
| reg: gp11, |
| asm: "POPCNT", |
| typ: "UInt64", |
| clobberFlags: true, |
| }, |
| |
| // unsigned multiplication (64x64 → 128) |
| // |
| // Multiply the two 64-bit input operands together and place the 128-bit result into |
| // an even-odd register pair. The second register in the target pair also contains |
| // one of the input operands. Since we don't currently have a way to specify an |
| // even-odd register pair we hardcode this register pair as R2:R3. |
| { |
| name: "MLGR", |
| argLength: 2, |
| reg: regInfo{inputs: []regMask{gp, r3}, outputs: []regMask{r2, r3}}, |
| asm: "MLGR", |
| }, |
| |
| // pseudo operations to sum the output of the POPCNT instruction |
| {name: "SumBytes2", argLength: 1, typ: "UInt8"}, // sum the rightmost 2 bytes in arg0 ignoring overflow |
| {name: "SumBytes4", argLength: 1, typ: "UInt8"}, // sum the rightmost 4 bytes in arg0 ignoring overflow |
| {name: "SumBytes8", argLength: 1, typ: "UInt8"}, // sum all the bytes in arg0 ignoring overflow |
| |
| // store multiple |
| { |
| name: "STMG2", |
| argLength: 4, |
| reg: regInfo{inputs: []regMask{ptrsp, buildReg("R1"), buildReg("R2"), 0}}, |
| aux: "SymOff", |
| typ: "Mem", |
| asm: "STMG", |
| faultOnNilArg0: true, |
| symEffect: "Write", |
| clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets |
| }, |
| { |
| name: "STMG3", |
| argLength: 5, |
| reg: regInfo{inputs: []regMask{ptrsp, buildReg("R1"), buildReg("R2"), buildReg("R3"), 0}}, |
| aux: "SymOff", |
| typ: "Mem", |
| asm: "STMG", |
| faultOnNilArg0: true, |
| symEffect: "Write", |
| clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets |
| }, |
| { |
| name: "STMG4", |
| argLength: 6, |
| reg: regInfo{inputs: []regMask{ |
| ptrsp, |
| buildReg("R1"), |
| buildReg("R2"), |
| buildReg("R3"), |
| buildReg("R4"), |
| 0, |
| }}, |
| aux: "SymOff", |
| typ: "Mem", |
| asm: "STMG", |
| faultOnNilArg0: true, |
| symEffect: "Write", |
| clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets |
| }, |
| { |
| name: "STM2", |
| argLength: 4, |
| reg: regInfo{inputs: []regMask{ptrsp, buildReg("R1"), buildReg("R2"), 0}}, |
| aux: "SymOff", |
| typ: "Mem", |
| asm: "STMY", |
| faultOnNilArg0: true, |
| symEffect: "Write", |
| clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets |
| }, |
| { |
| name: "STM3", |
| argLength: 5, |
| reg: regInfo{inputs: []regMask{ptrsp, buildReg("R1"), buildReg("R2"), buildReg("R3"), 0}}, |
| aux: "SymOff", |
| typ: "Mem", |
| asm: "STMY", |
| faultOnNilArg0: true, |
| symEffect: "Write", |
| clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets |
| }, |
| { |
| name: "STM4", |
| argLength: 6, |
| reg: regInfo{inputs: []regMask{ |
| ptrsp, |
| buildReg("R1"), |
| buildReg("R2"), |
| buildReg("R3"), |
| buildReg("R4"), |
| 0, |
| }}, |
| aux: "SymOff", |
| typ: "Mem", |
| asm: "STMY", |
| faultOnNilArg0: true, |
| symEffect: "Write", |
| clobberFlags: true, // TODO(mundaym): currently uses AGFI to handle large offsets |
| }, |
| |
| // large move |
| // auxint = remaining bytes after loop (rem) |
| // arg0 = address of dst memory (in R1, changed as a side effect) |
| // arg1 = address of src memory (in R2, changed as a side effect) |
| // arg2 = pointer to last address to move in loop + 256 |
| // arg3 = mem |
| // returns mem |
| // |
| // mvc: MVC $256, 0(R2), 0(R1) |
| // MOVD $256(R1), R1 |
| // MOVD $256(R2), R2 |
| // CMP R2, Rarg2 |
| // BNE mvc |
| // MVC $rem, 0(R2), 0(R1) // if rem > 0 |
| { |
| name: "LoweredMove", |
| aux: "Int64", |
| argLength: 4, |
| reg: regInfo{ |
| inputs: []regMask{buildReg("R1"), buildReg("R2"), gpsp}, |
| clobbers: buildReg("R1 R2"), |
| }, |
| clobberFlags: true, |
| typ: "Mem", |
| faultOnNilArg0: true, |
| faultOnNilArg1: true, |
| }, |
| |
| // large clear |
| // auxint = remaining bytes after loop (rem) |
| // arg0 = address of dst memory (in R1, changed as a side effect) |
| // arg1 = pointer to last address to zero in loop + 256 |
| // arg2 = mem |
| // returns mem |
| // |
| // clear: CLEAR $256, 0(R1) |
| // MOVD $256(R1), R1 |
| // CMP R1, Rarg2 |
| // BNE clear |
| // CLEAR $rem, 0(R1) // if rem > 0 |
| { |
| name: "LoweredZero", |
| aux: "Int64", |
| argLength: 3, |
| reg: regInfo{ |
| inputs: []regMask{buildReg("R1"), gpsp}, |
| clobbers: buildReg("R1"), |
| }, |
| clobberFlags: true, |
| typ: "Mem", |
| faultOnNilArg0: true, |
| }, |
| } |
| |
| // All blocks on s390x have their condition code mask (s390x.CCMask) as the Aux value. |
| // The condition code mask is a 4-bit mask where each bit corresponds to a condition |
| // code value. If the value of the condition code matches a bit set in the condition |
| // code mask then the first successor is executed. Otherwise the second successor is |
| // executed. |
| // |
| // | condition code value | mask bit | |
| // +----------------------+------------+ |
| // | 0 (equal) | 0b1000 (8) | |
| // | 1 (less than) | 0b0100 (4) | |
| // | 2 (greater than) | 0b0010 (2) | |
| // | 3 (unordered) | 0b0001 (1) | |
| // |
| // Note: that compare-and-branch instructions must not have bit 3 (0b0001) set. |
| var S390Xblocks = []blockData{ |
| // branch on condition |
| {name: "BRC", controls: 1, aux: "S390XCCMask"}, // condition code value (flags) is Controls[0] |
| |
| // compare-and-branch (register-register) |
| // - integrates comparison of Controls[0] with Controls[1] |
| // - both control values must be in general purpose registers |
| {name: "CRJ", controls: 2, aux: "S390XCCMask"}, // signed 32-bit integer comparison |
| {name: "CGRJ", controls: 2, aux: "S390XCCMask"}, // signed 64-bit integer comparison |
| {name: "CLRJ", controls: 2, aux: "S390XCCMask"}, // unsigned 32-bit integer comparison |
| {name: "CLGRJ", controls: 2, aux: "S390XCCMask"}, // unsigned 64-bit integer comparison |
| |
| // compare-and-branch (register-immediate) |
| // - integrates comparison of Controls[0] with AuxInt |
| // - control value must be in a general purpose register |
| // - the AuxInt value is sign-extended for signed comparisons |
| // and zero-extended for unsigned comparisons |
| {name: "CIJ", controls: 1, aux: "S390XCCMaskInt8"}, // signed 32-bit integer comparison |
| {name: "CGIJ", controls: 1, aux: "S390XCCMaskInt8"}, // signed 64-bit integer comparison |
| {name: "CLIJ", controls: 1, aux: "S390XCCMaskUint8"}, // unsigned 32-bit integer comparison |
| {name: "CLGIJ", controls: 1, aux: "S390XCCMaskUint8"}, // unsigned 64-bit integer comparison |
| } |
| |
| archs = append(archs, arch{ |
| name: "S390X", |
| pkg: "cmd/internal/obj/s390x", |
| genfile: "../../s390x/ssa.go", |
| ops: S390Xops, |
| blocks: S390Xblocks, |
| regnames: regNamesS390X, |
| gpregmask: gp, |
| fpregmask: fp, |
| framepointerreg: -1, // not used |
| linkreg: int8(num["R14"]), |
| imports: []string{ |
| "cmd/internal/obj/s390x", |
| }, |
| }) |
| } |
