| // Copyright 2015 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // System calls and other sys.stuff for ARM64, Darwin |
| // System calls are implemented in libSystem, this file contains |
| // trampolines that convert from Go to C calling convention. |
| |
| #include "go_asm.h" |
| #include "go_tls.h" |
| #include "textflag.h" |
| |
| TEXT notok<>(SB),NOSPLIT,$0 |
| MOVD $0, R8 |
| MOVD R8, (R8) |
| B 0(PC) |
| |
| TEXT runtime·open_trampoline(SB),NOSPLIT,$0 |
| MOVW 8(R0), R1 // arg 2 flags |
| MOVW 12(R0), R2 // arg 3 mode |
| MOVD 0(R0), R0 // arg 1 pathname |
| BL libc_open(SB) |
| RET |
| |
| TEXT runtime·close_trampoline(SB),NOSPLIT,$0 |
| MOVW 0(R0), R0 // arg 1 fd |
| BL libc_close(SB) |
| RET |
| |
| TEXT runtime·write_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 buf |
| MOVW 16(R0), R2 // arg 3 count |
| MOVW 0(R0), R0 // arg 1 fd |
| BL libc_write(SB) |
| RET |
| |
| TEXT runtime·read_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 buf |
| MOVW 16(R0), R2 // arg 3 count |
| MOVW 0(R0), R0 // arg 1 fd |
| BL libc_read(SB) |
| RET |
| |
| TEXT runtime·exit_trampoline(SB),NOSPLIT|NOFRAME,$0 |
| MOVW 0(R0), R0 |
| BL libc_exit(SB) |
| MOVD $1234, R0 |
| MOVD $1002, R1 |
| MOVD R0, (R1) // fail hard |
| |
| TEXT runtime·raiseproc_trampoline(SB),NOSPLIT,$0 |
| MOVD 0(R0), R19 // signal |
| BL libc_getpid(SB) |
| // arg 1 pid already in R0 from getpid |
| MOVD R19, R1 // arg 2 signal |
| BL libc_kill(SB) |
| RET |
| |
| TEXT runtime·mmap_trampoline(SB),NOSPLIT,$0 |
| MOVD R0, R19 |
| MOVD 0(R19), R0 // arg 1 addr |
| MOVD 8(R19), R1 // arg 2 len |
| MOVW 16(R19), R2 // arg 3 prot |
| MOVW 20(R19), R3 // arg 4 flags |
| MOVW 24(R19), R4 // arg 5 fd |
| MOVW 28(R19), R5 // arg 6 off |
| BL libc_mmap(SB) |
| MOVD $0, R1 |
| MOVD $-1, R2 |
| CMP R0, R2 |
| BNE ok |
| BL libc_error(SB) |
| MOVW (R0), R1 |
| MOVD $0, R0 |
| ok: |
| MOVD R0, 32(R19) // ret 1 p |
| MOVD R1, 40(R19) // ret 2 err |
| RET |
| |
| TEXT runtime·munmap_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 len |
| MOVD 0(R0), R0 // arg 1 addr |
| BL libc_munmap(SB) |
| CMP $0, R0 |
| BEQ 2(PC) |
| BL notok<>(SB) |
| RET |
| |
| TEXT runtime·madvise_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 len |
| MOVW 16(R0), R2 // arg 3 advice |
| MOVD 0(R0), R0 // arg 1 addr |
| BL libc_madvise(SB) |
| RET |
| |
| TEXT runtime·setitimer_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 new |
| MOVD 16(R0), R2 // arg 3 old |
| MOVW 0(R0), R0 // arg 1 which |
| BL libc_setitimer(SB) |
| RET |
| |
| TEXT runtime·walltime_trampoline(SB),NOSPLIT,$0 |
| // R0 already has *timeval |
| MOVD $0, R1 // no timezone needed |
| BL libc_gettimeofday(SB) |
| RET |
| |
| GLOBL timebase<>(SB),NOPTR,$(machTimebaseInfo__size) |
| |
| TEXT runtime·nanotime_trampoline(SB),NOSPLIT,$40 |
| MOVD R0, R19 |
| BL libc_mach_absolute_time(SB) |
| MOVD R0, 0(R19) |
| MOVW timebase<>+machTimebaseInfo_numer(SB), R20 |
| MOVD $timebase<>+machTimebaseInfo_denom(SB), R21 |
| LDARW (R21), R21 // atomic read |
| CMP $0, R21 |
| BNE initialized |
| |
| SUB $(machTimebaseInfo__size+15)/16*16, RSP |
| MOVD RSP, R0 |
| BL libc_mach_timebase_info(SB) |
| MOVW machTimebaseInfo_numer(RSP), R20 |
| MOVW machTimebaseInfo_denom(RSP), R21 |
| ADD $(machTimebaseInfo__size+15)/16*16, RSP |
| |
| MOVW R20, timebase<>+machTimebaseInfo_numer(SB) |
| MOVD $timebase<>+machTimebaseInfo_denom(SB), R22 |
| STLRW R21, (R22) // atomic write |
| |
| initialized: |
| MOVW R20, 8(R19) |
| MOVW R21, 12(R19) |
| RET |
| |
| TEXT runtime·sigfwd(SB),NOSPLIT,$0-32 |
| MOVW sig+8(FP), R0 |
| MOVD info+16(FP), R1 |
| MOVD ctx+24(FP), R2 |
| MOVD fn+0(FP), R11 |
| BL (R11) |
| RET |
| |
| TEXT runtime·sigtramp(SB),NOSPLIT,$0 |
| // Reserve space for callee-save registers and arguments. |
| SUB $(8*16), RSP |
| |
| // Save callee-save registers. |
| MOVD R19, (8*4)(RSP) |
| MOVD R20, (8*5)(RSP) |
| MOVD R21, (8*6)(RSP) |
| MOVD R22, (8*7)(RSP) |
| MOVD R23, (8*8)(RSP) |
| MOVD R24, (8*9)(RSP) |
| MOVD R25, (8*10)(RSP) |
| MOVD R26, (8*11)(RSP) |
| MOVD R27, (8*12)(RSP) |
| MOVD g, (8*13)(RSP) |
| MOVD R29, (8*14)(RSP) |
| |
| // Save arguments. |
| MOVW R0, (8*1)(RSP) // sig |
| MOVD R1, (8*2)(RSP) // info |
| MOVD R2, (8*3)(RSP) // ctx |
| |
| // this might be called in external code context, |
| // where g is not set. |
| MOVB runtime·iscgo(SB), R0 |
| CMP $0, R0 |
| BEQ 2(PC) |
| BL runtime·load_g(SB) |
| |
| MOVD RSP, R6 |
| CMP $0, g |
| BEQ nog |
| // iOS always use the main stack to run the signal handler. |
| // We need to switch to gsignal ourselves. |
| MOVD g_m(g), R11 |
| MOVD m_gsignal(R11), R5 |
| MOVD (g_stack+stack_hi)(R5), R6 |
| |
| nog: |
| // Restore arguments. |
| MOVW (8*1)(RSP), R0 |
| MOVD (8*2)(RSP), R1 |
| MOVD (8*3)(RSP), R2 |
| |
| // Reserve space for args and the stack pointer on the |
| // gsignal stack. |
| SUB $48, R6 |
| // Save stack pointer. |
| MOVD RSP, R4 |
| MOVD R4, (8*4)(R6) |
| // Switch to gsignal stack. |
| MOVD R6, RSP |
| |
| // Call sigtrampgo. |
| MOVW R0, (8*1)(RSP) |
| MOVD R1, (8*2)(RSP) |
| MOVD R2, (8*3)(RSP) |
| MOVD $runtime·sigtrampgo(SB), R11 |
| BL (R11) |
| |
| // Switch to old stack. |
| MOVD (8*4)(RSP), R5 |
| MOVD R5, RSP |
| |
| // Restore callee-save registers. |
| MOVD (8*4)(RSP), R19 |
| MOVD (8*5)(RSP), R20 |
| MOVD (8*6)(RSP), R21 |
| MOVD (8*7)(RSP), R22 |
| MOVD (8*8)(RSP), R23 |
| MOVD (8*9)(RSP), R24 |
| MOVD (8*10)(RSP), R25 |
| MOVD (8*11)(RSP), R26 |
| MOVD (8*12)(RSP), R27 |
| MOVD (8*13)(RSP), g |
| MOVD (8*14)(RSP), R29 |
| |
| ADD $(8*16), RSP |
| |
| RET |
| |
| TEXT runtime·cgoSigtramp(SB),NOSPLIT,$0 |
| JMP runtime·sigtramp(SB) |
| |
| TEXT runtime·sigprocmask_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 new |
| MOVD 16(R0), R2 // arg 3 old |
| MOVW 0(R0), R0 // arg 1 how |
| BL libc_pthread_sigmask(SB) |
| CMP $0, R0 |
| BEQ 2(PC) |
| BL notok<>(SB) |
| RET |
| |
| TEXT runtime·sigaction_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 new |
| MOVD 16(R0), R2 // arg 3 old |
| MOVW 0(R0), R0 // arg 1 how |
| BL libc_sigaction(SB) |
| CMP $0, R0 |
| BEQ 2(PC) |
| BL notok<>(SB) |
| RET |
| |
| TEXT runtime·usleep_trampoline(SB),NOSPLIT,$0 |
| MOVW 0(R0), R0 // arg 1 usec |
| BL libc_usleep(SB) |
| RET |
| |
| TEXT runtime·sysctl_trampoline(SB),NOSPLIT,$0 |
| MOVW 8(R0), R1 // arg 2 miblen |
| MOVD 16(R0), R2 // arg 3 out |
| MOVD 24(R0), R3 // arg 4 size |
| MOVD 32(R0), R4 // arg 5 dst |
| MOVD 40(R0), R5 // arg 6 ndst |
| MOVD 0(R0), R0 // arg 1 mib |
| BL libc_sysctl(SB) |
| RET |
| |
| TEXT runtime·kqueue_trampoline(SB),NOSPLIT,$0 |
| BL libc_kqueue(SB) |
| RET |
| |
| TEXT runtime·kevent_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 keventt |
| MOVW 16(R0), R2 // arg 3 nch |
| MOVD 24(R0), R3 // arg 4 ev |
| MOVW 32(R0), R4 // arg 5 nev |
| MOVD 40(R0), R5 // arg 6 ts |
| MOVW 0(R0), R0 // arg 1 kq |
| BL libc_kevent(SB) |
| MOVD $-1, R2 |
| CMP R0, R2 |
| BNE ok |
| BL libc_error(SB) |
| MOVW (R0), R0 // errno |
| NEG R0, R0 // caller wants it as a negative error code |
| ok: |
| RET |
| |
| TEXT runtime·fcntl_trampoline(SB),NOSPLIT,$0 |
| MOVW 4(R0), R1 // arg 2 cmd |
| MOVW 8(R0), R2 // arg 3 arg |
| MOVW 0(R0), R0 // arg 1 fd |
| BL libc_fcntl(SB) |
| RET |
| |
| // sigaltstack on iOS is not supported and will always |
| // run the signal handler on the main stack, so our sigtramp has |
| // to do the stack switch ourselves. |
| TEXT runtime·sigaltstack_trampoline(SB),NOSPLIT,$0 |
| MOVW $43, R0 |
| BL libc_exit(SB) |
| RET |
| |
| // Thread related functions |
| // Note: On darwin/arm64, the runtime always use runtime/cgo to |
| // create threads, so all thread related functions will just exit with a |
| // unique status. |
| |
| TEXT runtime·mstart_stub(SB),NOSPLIT,$0 |
| MOVW $44, R0 |
| BL libc_exit(SB) |
| RET |
| |
| TEXT runtime·pthread_attr_init_trampoline(SB),NOSPLIT,$0 |
| MOVW $45, R0 |
| BL libc_exit(SB) |
| RET |
| |
| TEXT runtime·pthread_attr_setstacksize_trampoline(SB),NOSPLIT,$0 |
| MOVW $46, R0 |
| BL libc_exit(SB) |
| RET |
| |
| TEXT runtime·pthread_attr_setdetachstate_trampoline(SB),NOSPLIT,$0 |
| MOVW $47, R0 |
| BL libc_exit(SB) |
| RET |
| |
| TEXT runtime·pthread_create_trampoline(SB),NOSPLIT,$0 |
| MOVW $48, R0 |
| BL libc_exit(SB) |
| RET |
| |
| TEXT runtime·raise_trampoline(SB),NOSPLIT,$0 |
| MOVW 0(R0), R0 // arg 1 sig |
| BL libc_raise(SB) |
| RET |
| |
| TEXT runtime·pthread_mutex_init_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 attr |
| MOVD 0(R0), R0 // arg 1 mutex |
| BL libc_pthread_mutex_init(SB) |
| RET |
| |
| TEXT runtime·pthread_mutex_lock_trampoline(SB),NOSPLIT,$0 |
| MOVD 0(R0), R0 // arg 1 mutex |
| BL libc_pthread_mutex_lock(SB) |
| RET |
| |
| TEXT runtime·pthread_mutex_unlock_trampoline(SB),NOSPLIT,$0 |
| MOVD 0(R0), R0 // arg 1 mutex |
| BL libc_pthread_mutex_unlock(SB) |
| RET |
| |
| TEXT runtime·pthread_cond_init_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 attr |
| MOVD 0(R0), R0 // arg 1 cond |
| BL libc_pthread_cond_init(SB) |
| RET |
| |
| TEXT runtime·pthread_cond_wait_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 mutex |
| MOVD 0(R0), R0 // arg 1 cond |
| BL libc_pthread_cond_wait(SB) |
| RET |
| |
| TEXT runtime·pthread_cond_timedwait_relative_np_trampoline(SB),NOSPLIT,$0 |
| MOVD 8(R0), R1 // arg 2 mutex |
| MOVD 16(R0), R2 // arg 3 timeout |
| MOVD 0(R0), R0 // arg 1 cond |
| BL libc_pthread_cond_timedwait_relative_np(SB) |
| RET |
| |
| TEXT runtime·pthread_cond_signal_trampoline(SB),NOSPLIT,$0 |
| MOVD 0(R0), R0 // arg 1 cond |
| BL libc_pthread_cond_signal(SB) |
| RET |
| |
