| // Copyright 2009 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // |
| // System calls and other sys.stuff for 386, Linux |
| // |
| |
| #include "go_asm.h" |
| #include "go_tls.h" |
| #include "textflag.h" |
| |
| // Most linux systems use glibc's dynamic linker, which puts the |
| // __kernel_vsyscall vdso helper at 0x10(GS) for easy access from position |
| // independent code and setldt in runtime does the same in the statically |
| // linked case. However, systems that use alternative libc such as Android's |
| // bionic and musl, do not save the helper anywhere, and so the only way to |
| // invoke a syscall from position independent code is boring old int $0x80 |
| // (which is also what syscall wrappers in bionic/musl use). |
| // |
| // The benchmarks also showed that using int $0x80 is as fast as calling |
| // *%gs:0x10 except on AMD Opteron. See https://golang.org/cl/19833 |
| // for the benchmark program and raw data. |
| //#define INVOKE_SYSCALL CALL 0x10(GS) // non-portable |
| #define INVOKE_SYSCALL INT $0x80 |
| |
| #define SYS_exit 1 |
| #define SYS_read 3 |
| #define SYS_write 4 |
| #define SYS_open 5 |
| #define SYS_close 6 |
| #define SYS_getpid 20 |
| #define SYS_access 33 |
| #define SYS_kill 37 |
| #define SYS_pipe 42 |
| #define SYS_brk 45 |
| #define SYS_fcntl 55 |
| #define SYS_munmap 91 |
| #define SYS_socketcall 102 |
| #define SYS_setittimer 104 |
| #define SYS_clone 120 |
| #define SYS_sched_yield 158 |
| #define SYS_nanosleep 162 |
| #define SYS_rt_sigreturn 173 |
| #define SYS_rt_sigaction 174 |
| #define SYS_rt_sigprocmask 175 |
| #define SYS_sigaltstack 186 |
| #define SYS_mmap2 192 |
| #define SYS_mincore 218 |
| #define SYS_madvise 219 |
| #define SYS_gettid 224 |
| #define SYS_futex 240 |
| #define SYS_sched_getaffinity 242 |
| #define SYS_set_thread_area 243 |
| #define SYS_exit_group 252 |
| #define SYS_epoll_create 254 |
| #define SYS_epoll_ctl 255 |
| #define SYS_epoll_wait 256 |
| #define SYS_clock_gettime 265 |
| #define SYS_tgkill 270 |
| #define SYS_epoll_create1 329 |
| #define SYS_pipe2 331 |
| |
| TEXT runtime·exit(SB),NOSPLIT,$0 |
| MOVL $SYS_exit_group, AX |
| MOVL code+0(FP), BX |
| INVOKE_SYSCALL |
| INT $3 // not reached |
| RET |
| |
| TEXT exit1<>(SB),NOSPLIT,$0 |
| MOVL $SYS_exit, AX |
| MOVL code+0(FP), BX |
| INVOKE_SYSCALL |
| INT $3 // not reached |
| RET |
| |
| // func exitThread(wait *uint32) |
| TEXT runtime·exitThread(SB),NOSPLIT,$0-4 |
| MOVL wait+0(FP), AX |
| // We're done using the stack. |
| MOVL $0, (AX) |
| MOVL $1, AX // exit (just this thread) |
| MOVL $0, BX // exit code |
| INT $0x80 // no stack; must not use CALL |
| // We may not even have a stack any more. |
| INT $3 |
| JMP 0(PC) |
| |
| TEXT runtime·open(SB),NOSPLIT,$0 |
| MOVL $SYS_open, AX |
| MOVL name+0(FP), BX |
| MOVL mode+4(FP), CX |
| MOVL perm+8(FP), DX |
| INVOKE_SYSCALL |
| CMPL AX, $0xfffff001 |
| JLS 2(PC) |
| MOVL $-1, AX |
| MOVL AX, ret+12(FP) |
| RET |
| |
| TEXT runtime·closefd(SB),NOSPLIT,$0 |
| MOVL $SYS_close, AX |
| MOVL fd+0(FP), BX |
| INVOKE_SYSCALL |
| CMPL AX, $0xfffff001 |
| JLS 2(PC) |
| MOVL $-1, AX |
| MOVL AX, ret+4(FP) |
| RET |
| |
| TEXT runtime·write1(SB),NOSPLIT,$0 |
| MOVL $SYS_write, AX |
| MOVL fd+0(FP), BX |
| MOVL p+4(FP), CX |
| MOVL n+8(FP), DX |
| INVOKE_SYSCALL |
| MOVL AX, ret+12(FP) |
| RET |
| |
| TEXT runtime·read(SB),NOSPLIT,$0 |
| MOVL $SYS_read, AX |
| MOVL fd+0(FP), BX |
| MOVL p+4(FP), CX |
| MOVL n+8(FP), DX |
| INVOKE_SYSCALL |
| MOVL AX, ret+12(FP) |
| RET |
| |
| // func pipe() (r, w int32, errno int32) |
| TEXT runtime·pipe(SB),NOSPLIT,$0-12 |
| MOVL $SYS_pipe, AX |
| LEAL r+0(FP), BX |
| INVOKE_SYSCALL |
| MOVL AX, errno+8(FP) |
| RET |
| |
| // func pipe2(flags int32) (r, w int32, errno int32) |
| TEXT runtime·pipe2(SB),NOSPLIT,$0-16 |
| MOVL $SYS_pipe2, AX |
| LEAL r+4(FP), BX |
| MOVL flags+0(FP), CX |
| INVOKE_SYSCALL |
| MOVL AX, errno+12(FP) |
| RET |
| |
| TEXT runtime·usleep(SB),NOSPLIT,$8 |
| MOVL $0, DX |
| MOVL usec+0(FP), AX |
| MOVL $1000000, CX |
| DIVL CX |
| MOVL AX, 0(SP) |
| MOVL $1000, AX // usec to nsec |
| MULL DX |
| MOVL AX, 4(SP) |
| |
| // nanosleep(&ts, 0) |
| MOVL $SYS_nanosleep, AX |
| LEAL 0(SP), BX |
| MOVL $0, CX |
| INVOKE_SYSCALL |
| RET |
| |
| TEXT runtime·gettid(SB),NOSPLIT,$0-4 |
| MOVL $SYS_gettid, AX |
| INVOKE_SYSCALL |
| MOVL AX, ret+0(FP) |
| RET |
| |
| TEXT runtime·raise(SB),NOSPLIT,$12 |
| MOVL $SYS_getpid, AX |
| INVOKE_SYSCALL |
| MOVL AX, BX // arg 1 pid |
| MOVL $SYS_gettid, AX |
| INVOKE_SYSCALL |
| MOVL AX, CX // arg 2 tid |
| MOVL sig+0(FP), DX // arg 3 signal |
| MOVL $SYS_tgkill, AX |
| INVOKE_SYSCALL |
| RET |
| |
| TEXT runtime·raiseproc(SB),NOSPLIT,$12 |
| MOVL $SYS_getpid, AX |
| INVOKE_SYSCALL |
| MOVL AX, BX // arg 1 pid |
| MOVL sig+0(FP), CX // arg 2 signal |
| MOVL $SYS_kill, AX |
| INVOKE_SYSCALL |
| RET |
| |
| TEXT ·getpid(SB),NOSPLIT,$0-4 |
| MOVL $SYS_getpid, AX |
| INVOKE_SYSCALL |
| MOVL AX, ret+0(FP) |
| RET |
| |
| TEXT ·tgkill(SB),NOSPLIT,$0 |
| MOVL $SYS_tgkill, AX |
| MOVL tgid+0(FP), BX |
| MOVL tid+4(FP), CX |
| MOVL sig+8(FP), DX |
| INVOKE_SYSCALL |
| RET |
| |
| TEXT runtime·setitimer(SB),NOSPLIT,$0-12 |
| MOVL $SYS_setittimer, AX |
| MOVL mode+0(FP), BX |
| MOVL new+4(FP), CX |
| MOVL old+8(FP), DX |
| INVOKE_SYSCALL |
| RET |
| |
| TEXT runtime·mincore(SB),NOSPLIT,$0-16 |
| MOVL $SYS_mincore, AX |
| MOVL addr+0(FP), BX |
| MOVL n+4(FP), CX |
| MOVL dst+8(FP), DX |
| INVOKE_SYSCALL |
| MOVL AX, ret+12(FP) |
| RET |
| |
| // func walltime() (sec int64, nsec int32) |
| TEXT runtime·walltime(SB), NOSPLIT, $8-12 |
| // We don't know how much stack space the VDSO code will need, |
| // so switch to g0. |
| |
| MOVL SP, BP // Save old SP; BP unchanged by C code. |
| |
| get_tls(CX) |
| MOVL g(CX), AX |
| MOVL g_m(AX), SI // SI unchanged by C code. |
| |
| // Set vdsoPC and vdsoSP for SIGPROF traceback. |
| // Save the old values on stack and restore them on exit, |
| // so this function is reentrant. |
| MOVL m_vdsoPC(SI), CX |
| MOVL m_vdsoSP(SI), DX |
| MOVL CX, 0(SP) |
| MOVL DX, 4(SP) |
| |
| LEAL sec+0(FP), DX |
| MOVL -4(DX), CX |
| MOVL CX, m_vdsoPC(SI) |
| MOVL DX, m_vdsoSP(SI) |
| |
| CMPL AX, m_curg(SI) // Only switch if on curg. |
| JNE noswitch |
| |
| MOVL m_g0(SI), DX |
| MOVL (g_sched+gobuf_sp)(DX), SP // Set SP to g0 stack |
| |
| noswitch: |
| SUBL $16, SP // Space for results |
| ANDL $~15, SP // Align for C code |
| |
| // Stack layout, depending on call path: |
| // x(SP) vDSO INVOKE_SYSCALL |
| // 12 ts.tv_nsec ts.tv_nsec |
| // 8 ts.tv_sec ts.tv_sec |
| // 4 &ts - |
| // 0 CLOCK_<id> - |
| |
| MOVL runtime·vdsoClockgettimeSym(SB), AX |
| CMPL AX, $0 |
| JEQ fallback |
| |
| LEAL 8(SP), BX // &ts (struct timespec) |
| MOVL BX, 4(SP) |
| MOVL $0, 0(SP) // CLOCK_REALTIME |
| CALL AX |
| JMP finish |
| |
| fallback: |
| MOVL $SYS_clock_gettime, AX |
| MOVL $0, BX // CLOCK_REALTIME |
| LEAL 8(SP), CX |
| INVOKE_SYSCALL |
| |
| finish: |
| MOVL 8(SP), AX // sec |
| MOVL 12(SP), BX // nsec |
| |
| MOVL BP, SP // Restore real SP |
| // Restore vdsoPC, vdsoSP |
| // We don't worry about being signaled between the two stores. |
| // If we are not in a signal handler, we'll restore vdsoSP to 0, |
| // and no one will care about vdsoPC. If we are in a signal handler, |
| // we cannot receive another signal. |
| MOVL 4(SP), CX |
| MOVL CX, m_vdsoSP(SI) |
| MOVL 0(SP), CX |
| MOVL CX, m_vdsoPC(SI) |
| |
| // sec is in AX, nsec in BX |
| MOVL AX, sec_lo+0(FP) |
| MOVL $0, sec_hi+4(FP) |
| MOVL BX, nsec+8(FP) |
| RET |
| |
| // int64 nanotime(void) so really |
| // void nanotime(int64 *nsec) |
| TEXT runtime·nanotime1(SB), NOSPLIT, $8-8 |
| // Switch to g0 stack. See comment above in runtime·walltime. |
| |
| MOVL SP, BP // Save old SP; BP unchanged by C code. |
| |
| get_tls(CX) |
| MOVL g(CX), AX |
| MOVL g_m(AX), SI // SI unchanged by C code. |
| |
| // Set vdsoPC and vdsoSP for SIGPROF traceback. |
| // Save the old values on stack and restore them on exit, |
| // so this function is reentrant. |
| MOVL m_vdsoPC(SI), CX |
| MOVL m_vdsoSP(SI), DX |
| MOVL CX, 0(SP) |
| MOVL DX, 4(SP) |
| |
| LEAL ret+0(FP), DX |
| MOVL -4(DX), CX |
| MOVL CX, m_vdsoPC(SI) |
| MOVL DX, m_vdsoSP(SI) |
| |
| CMPL AX, m_curg(SI) // Only switch if on curg. |
| JNE noswitch |
| |
| MOVL m_g0(SI), DX |
| MOVL (g_sched+gobuf_sp)(DX), SP // Set SP to g0 stack |
| |
| noswitch: |
| SUBL $16, SP // Space for results |
| ANDL $~15, SP // Align for C code |
| |
| MOVL runtime·vdsoClockgettimeSym(SB), AX |
| CMPL AX, $0 |
| JEQ fallback |
| |
| LEAL 8(SP), BX // &ts (struct timespec) |
| MOVL BX, 4(SP) |
| MOVL $1, 0(SP) // CLOCK_MONOTONIC |
| CALL AX |
| JMP finish |
| |
| fallback: |
| MOVL $SYS_clock_gettime, AX |
| MOVL $1, BX // CLOCK_MONOTONIC |
| LEAL 8(SP), CX |
| INVOKE_SYSCALL |
| |
| finish: |
| MOVL 8(SP), AX // sec |
| MOVL 12(SP), BX // nsec |
| |
| MOVL BP, SP // Restore real SP |
| // Restore vdsoPC, vdsoSP |
| // We don't worry about being signaled between the two stores. |
| // If we are not in a signal handler, we'll restore vdsoSP to 0, |
| // and no one will care about vdsoPC. If we are in a signal handler, |
| // we cannot receive another signal. |
| MOVL 4(SP), CX |
| MOVL CX, m_vdsoSP(SI) |
| MOVL 0(SP), CX |
| MOVL CX, m_vdsoPC(SI) |
| |
| // sec is in AX, nsec in BX |
| // convert to DX:AX nsec |
| MOVL $1000000000, CX |
| MULL CX |
| ADDL BX, AX |
| ADCL $0, DX |
| |
| MOVL AX, ret_lo+0(FP) |
| MOVL DX, ret_hi+4(FP) |
| RET |
| |
| TEXT runtime·rtsigprocmask(SB),NOSPLIT,$0 |
| MOVL $SYS_rt_sigprocmask, AX |
| MOVL how+0(FP), BX |
| MOVL new+4(FP), CX |
| MOVL old+8(FP), DX |
| MOVL size+12(FP), SI |
| INVOKE_SYSCALL |
| CMPL AX, $0xfffff001 |
| JLS 2(PC) |
| INT $3 |
| RET |
| |
| TEXT runtime·rt_sigaction(SB),NOSPLIT,$0 |
| MOVL $SYS_rt_sigaction, AX |
| MOVL sig+0(FP), BX |
| MOVL new+4(FP), CX |
| MOVL old+8(FP), DX |
| MOVL size+12(FP), SI |
| INVOKE_SYSCALL |
| MOVL AX, ret+16(FP) |
| RET |
| |
| TEXT runtime·sigfwd(SB),NOSPLIT,$12-16 |
| MOVL fn+0(FP), AX |
| MOVL sig+4(FP), BX |
| MOVL info+8(FP), CX |
| MOVL ctx+12(FP), DX |
| MOVL SP, SI |
| SUBL $32, SP |
| ANDL $-15, SP // align stack: handler might be a C function |
| MOVL BX, 0(SP) |
| MOVL CX, 4(SP) |
| MOVL DX, 8(SP) |
| MOVL SI, 12(SP) // save SI: handler might be a Go function |
| CALL AX |
| MOVL 12(SP), AX |
| MOVL AX, SP |
| RET |
| |
| // Called using C ABI. |
| TEXT runtime·sigtramp(SB),NOSPLIT,$28 |
| // Save callee-saved C registers, since the caller may be a C signal handler. |
| MOVL BX, bx-4(SP) |
| MOVL BP, bp-8(SP) |
| MOVL SI, si-12(SP) |
| MOVL DI, di-16(SP) |
| // We don't save mxcsr or the x87 control word because sigtrampgo doesn't |
| // modify them. |
| |
| MOVL (28+4)(SP), BX |
| MOVL BX, 0(SP) |
| MOVL (28+8)(SP), BX |
| MOVL BX, 4(SP) |
| MOVL (28+12)(SP), BX |
| MOVL BX, 8(SP) |
| CALL runtime·sigtrampgo(SB) |
| |
| MOVL di-16(SP), DI |
| MOVL si-12(SP), SI |
| MOVL bp-8(SP), BP |
| MOVL bx-4(SP), BX |
| RET |
| |
| TEXT runtime·cgoSigtramp(SB),NOSPLIT,$0 |
| JMP runtime·sigtramp(SB) |
| |
| TEXT runtime·sigreturn(SB),NOSPLIT,$0 |
| MOVL $SYS_rt_sigreturn, AX |
| // Sigreturn expects same SP as signal handler, |
| // so cannot CALL 0x10(GS) here. |
| INT $0x80 |
| INT $3 // not reached |
| RET |
| |
| TEXT runtime·mmap(SB),NOSPLIT,$0 |
| MOVL $SYS_mmap2, AX |
| MOVL addr+0(FP), BX |
| MOVL n+4(FP), CX |
| MOVL prot+8(FP), DX |
| MOVL flags+12(FP), SI |
| MOVL fd+16(FP), DI |
| MOVL off+20(FP), BP |
| SHRL $12, BP |
| INVOKE_SYSCALL |
| CMPL AX, $0xfffff001 |
| JLS ok |
| NOTL AX |
| INCL AX |
| MOVL $0, p+24(FP) |
| MOVL AX, err+28(FP) |
| RET |
| ok: |
| MOVL AX, p+24(FP) |
| MOVL $0, err+28(FP) |
| RET |
| |
| TEXT runtime·munmap(SB),NOSPLIT,$0 |
| MOVL $SYS_munmap, AX |
| MOVL addr+0(FP), BX |
| MOVL n+4(FP), CX |
| INVOKE_SYSCALL |
| CMPL AX, $0xfffff001 |
| JLS 2(PC) |
| INT $3 |
| RET |
| |
| TEXT runtime·madvise(SB),NOSPLIT,$0 |
| MOVL $SYS_madvise, AX |
| MOVL addr+0(FP), BX |
| MOVL n+4(FP), CX |
| MOVL flags+8(FP), DX |
| INVOKE_SYSCALL |
| MOVL AX, ret+12(FP) |
| RET |
| |
| // int32 futex(int32 *uaddr, int32 op, int32 val, |
| // struct timespec *timeout, int32 *uaddr2, int32 val2); |
| TEXT runtime·futex(SB),NOSPLIT,$0 |
| MOVL $SYS_futex, AX |
| MOVL addr+0(FP), BX |
| MOVL op+4(FP), CX |
| MOVL val+8(FP), DX |
| MOVL ts+12(FP), SI |
| MOVL addr2+16(FP), DI |
| MOVL val3+20(FP), BP |
| INVOKE_SYSCALL |
| MOVL AX, ret+24(FP) |
| RET |
| |
| // int32 clone(int32 flags, void *stack, M *mp, G *gp, void (*fn)(void)); |
| TEXT runtime·clone(SB),NOSPLIT,$0 |
| MOVL $SYS_clone, AX |
| MOVL flags+0(FP), BX |
| MOVL stk+4(FP), CX |
| MOVL $0, DX // parent tid ptr |
| MOVL $0, DI // child tid ptr |
| |
| // Copy mp, gp, fn off parent stack for use by child. |
| SUBL $16, CX |
| MOVL mp+8(FP), SI |
| MOVL SI, 0(CX) |
| MOVL gp+12(FP), SI |
| MOVL SI, 4(CX) |
| MOVL fn+16(FP), SI |
| MOVL SI, 8(CX) |
| MOVL $1234, 12(CX) |
| |
| // cannot use CALL 0x10(GS) here, because the stack changes during the |
| // system call (after CALL 0x10(GS), the child is still using the |
| // parent's stack when executing its RET instruction). |
| INT $0x80 |
| |
| // In parent, return. |
| CMPL AX, $0 |
| JEQ 3(PC) |
| MOVL AX, ret+20(FP) |
| RET |
| |
| // Paranoia: check that SP is as we expect. |
| NOP SP // tell vet SP changed - stop checking offsets |
| MOVL 12(SP), BP |
| CMPL BP, $1234 |
| JEQ 2(PC) |
| INT $3 |
| |
| // Initialize AX to Linux tid |
| MOVL $SYS_gettid, AX |
| INVOKE_SYSCALL |
| |
| MOVL 0(SP), BX // m |
| MOVL 4(SP), DX // g |
| MOVL 8(SP), SI // fn |
| |
| CMPL BX, $0 |
| JEQ nog |
| CMPL DX, $0 |
| JEQ nog |
| |
| MOVL AX, m_procid(BX) // save tid as m->procid |
| |
| // set up ldt 7+id to point at m->tls. |
| LEAL m_tls(BX), BP |
| MOVL m_id(BX), DI |
| ADDL $7, DI // m0 is LDT#7. count up. |
| // setldt(tls#, &tls, sizeof tls) |
| PUSHAL // save registers |
| PUSHL $32 // sizeof tls |
| PUSHL BP // &tls |
| PUSHL DI // tls # |
| CALL runtime·setldt(SB) |
| POPL AX |
| POPL AX |
| POPL AX |
| POPAL |
| |
| // Now segment is established. Initialize m, g. |
| get_tls(AX) |
| MOVL DX, g(AX) |
| MOVL BX, g_m(DX) |
| |
| CALL runtime·stackcheck(SB) // smashes AX, CX |
| MOVL 0(DX), DX // paranoia; check they are not nil |
| MOVL 0(BX), BX |
| |
| // more paranoia; check that stack splitting code works |
| PUSHAL |
| CALL runtime·emptyfunc(SB) |
| POPAL |
| |
| nog: |
| CALL SI // fn() |
| CALL exit1<>(SB) |
| MOVL $0x1234, 0x1005 |
| |
| TEXT runtime·sigaltstack(SB),NOSPLIT,$-8 |
| MOVL $SYS_sigaltstack, AX |
| MOVL new+0(FP), BX |
| MOVL old+4(FP), CX |
| INVOKE_SYSCALL |
| CMPL AX, $0xfffff001 |
| JLS 2(PC) |
| INT $3 |
| RET |
| |
| // <asm-i386/ldt.h> |
| // struct user_desc { |
| // unsigned int entry_number; |
| // unsigned long base_addr; |
| // unsigned int limit; |
| // unsigned int seg_32bit:1; |
| // unsigned int contents:2; |
| // unsigned int read_exec_only:1; |
| // unsigned int limit_in_pages:1; |
| // unsigned int seg_not_present:1; |
| // unsigned int useable:1; |
| // }; |
| #define SEG_32BIT 0x01 |
| // contents are the 2 bits 0x02 and 0x04. |
| #define CONTENTS_DATA 0x00 |
| #define CONTENTS_STACK 0x02 |
| #define CONTENTS_CODE 0x04 |
| #define READ_EXEC_ONLY 0x08 |
| #define LIMIT_IN_PAGES 0x10 |
| #define SEG_NOT_PRESENT 0x20 |
| #define USEABLE 0x40 |
| |
| // `-1` means the kernel will pick a TLS entry on the first setldt call, |
| // which happens during runtime init, and that we'll store back the saved |
| // entry and reuse that on subsequent calls when creating new threads. |
| DATA runtime·tls_entry_number+0(SB)/4, $-1 |
| GLOBL runtime·tls_entry_number(SB), NOPTR, $4 |
| |
| // setldt(int entry, int address, int limit) |
| // We use set_thread_area, which mucks with the GDT, instead of modify_ldt, |
| // which would modify the LDT, but is disabled on some kernels. |
| // The name, setldt, is a misnomer, although we leave this name as it is for |
| // the compatibility with other platforms. |
| TEXT runtime·setldt(SB),NOSPLIT,$32 |
| MOVL base+4(FP), DX |
| |
| #ifdef GOOS_android |
| // Android stores the TLS offset in runtime·tls_g. |
| SUBL runtime·tls_g(SB), DX |
| MOVL DX, 0(DX) |
| #else |
| /* |
| * When linking against the system libraries, |
| * we use its pthread_create and let it set up %gs |
| * for us. When we do that, the private storage |
| * we get is not at 0(GS), but -4(GS). |
| * To insulate the rest of the tool chain from this |
| * ugliness, 8l rewrites 0(TLS) into -4(GS) for us. |
| * To accommodate that rewrite, we translate |
| * the address here and bump the limit to 0xffffffff (no limit) |
| * so that -4(GS) maps to 0(address). |
| * Also, the final 0(GS) (current 4(DX)) has to point |
| * to itself, to mimic ELF. |
| */ |
| ADDL $0x4, DX // address |
| MOVL DX, 0(DX) |
| #endif |
| |
| // get entry number |
| MOVL runtime·tls_entry_number(SB), CX |
| |
| // set up user_desc |
| LEAL 16(SP), AX // struct user_desc |
| MOVL CX, 0(AX) // unsigned int entry_number |
| MOVL DX, 4(AX) // unsigned long base_addr |
| MOVL $0xfffff, 8(AX) // unsigned int limit |
| MOVL $(SEG_32BIT|LIMIT_IN_PAGES|USEABLE|CONTENTS_DATA), 12(AX) // flag bits |
| |
| // call set_thread_area |
| MOVL AX, BX // user_desc |
| MOVL $SYS_set_thread_area, AX |
| // We can't call this via 0x10(GS) because this is called from setldt0 to set that up. |
| INT $0x80 |
| |
| // breakpoint on error |
| CMPL AX, $0xfffff001 |
| JLS 2(PC) |
| INT $3 |
| |
| // read allocated entry number back out of user_desc |
| LEAL 16(SP), AX // get our user_desc back |
| MOVL 0(AX), AX |
| |
| // store entry number if the kernel allocated it |
| CMPL CX, $-1 |
| JNE 2(PC) |
| MOVL AX, runtime·tls_entry_number(SB) |
| |
| // compute segment selector - (entry*8+3) |
| SHLL $3, AX |
| ADDL $3, AX |
| MOVW AX, GS |
| |
| RET |
| |
| TEXT runtime·osyield(SB),NOSPLIT,$0 |
| MOVL $SYS_sched_yield, AX |
| INVOKE_SYSCALL |
| RET |
| |
| TEXT runtime·sched_getaffinity(SB),NOSPLIT,$0 |
| MOVL $SYS_sched_getaffinity, AX |
| MOVL pid+0(FP), BX |
| MOVL len+4(FP), CX |
| MOVL buf+8(FP), DX |
| INVOKE_SYSCALL |
| MOVL AX, ret+12(FP) |
| RET |
| |
| // int32 runtime·epollcreate(int32 size); |
| TEXT runtime·epollcreate(SB),NOSPLIT,$0 |
| MOVL $SYS_epoll_create, AX |
| MOVL size+0(FP), BX |
| INVOKE_SYSCALL |
| MOVL AX, ret+4(FP) |
| RET |
| |
| // int32 runtime·epollcreate1(int32 flags); |
| TEXT runtime·epollcreate1(SB),NOSPLIT,$0 |
| MOVL $SYS_epoll_create1, AX |
| MOVL flags+0(FP), BX |
| INVOKE_SYSCALL |
| MOVL AX, ret+4(FP) |
| RET |
| |
| // func epollctl(epfd, op, fd int32, ev *epollEvent) int |
| TEXT runtime·epollctl(SB),NOSPLIT,$0 |
| MOVL $SYS_epoll_ctl, AX |
| MOVL epfd+0(FP), BX |
| MOVL op+4(FP), CX |
| MOVL fd+8(FP), DX |
| MOVL ev+12(FP), SI |
| INVOKE_SYSCALL |
| MOVL AX, ret+16(FP) |
| RET |
| |
| // int32 runtime·epollwait(int32 epfd, EpollEvent *ev, int32 nev, int32 timeout); |
| TEXT runtime·epollwait(SB),NOSPLIT,$0 |
| MOVL $SYS_epoll_wait, AX |
| MOVL epfd+0(FP), BX |
| MOVL ev+4(FP), CX |
| MOVL nev+8(FP), DX |
| MOVL timeout+12(FP), SI |
| INVOKE_SYSCALL |
| MOVL AX, ret+16(FP) |
| RET |
| |
| // void runtime·closeonexec(int32 fd); |
| TEXT runtime·closeonexec(SB),NOSPLIT,$0 |
| MOVL $SYS_fcntl, AX |
| MOVL fd+0(FP), BX // fd |
| MOVL $2, CX // F_SETFD |
| MOVL $1, DX // FD_CLOEXEC |
| INVOKE_SYSCALL |
| RET |
| |
| // func runtime·setNonblock(fd int32) |
| TEXT runtime·setNonblock(SB),NOSPLIT,$0-4 |
| MOVL $SYS_fcntl, AX |
| MOVL fd+0(FP), BX // fd |
| MOVL $3, CX // F_GETFL |
| MOVL $0, DX |
| INVOKE_SYSCALL |
| MOVL fd+0(FP), BX // fd |
| MOVL $4, CX // F_SETFL |
| MOVL $0x800, DX // O_NONBLOCK |
| ORL AX, DX |
| MOVL $SYS_fcntl, AX |
| INVOKE_SYSCALL |
| RET |
| |
| // int access(const char *name, int mode) |
| TEXT runtime·access(SB),NOSPLIT,$0 |
| MOVL $SYS_access, AX |
| MOVL name+0(FP), BX |
| MOVL mode+4(FP), CX |
| INVOKE_SYSCALL |
| MOVL AX, ret+8(FP) |
| RET |
| |
| // int connect(int fd, const struct sockaddr *addr, socklen_t addrlen) |
| TEXT runtime·connect(SB),NOSPLIT,$0-16 |
| // connect is implemented as socketcall(NR_socket, 3, *(rest of args)) |
| // stack already should have fd, addr, addrlen. |
| MOVL $SYS_socketcall, AX |
| MOVL $3, BX // connect |
| LEAL fd+0(FP), CX |
| INVOKE_SYSCALL |
| MOVL AX, ret+12(FP) |
| RET |
| |
| // int socket(int domain, int type, int protocol) |
| TEXT runtime·socket(SB),NOSPLIT,$0-16 |
| // socket is implemented as socketcall(NR_socket, 1, *(rest of args)) |
| // stack already should have domain, type, protocol. |
| MOVL $SYS_socketcall, AX |
| MOVL $1, BX // socket |
| LEAL domain+0(FP), CX |
| INVOKE_SYSCALL |
| MOVL AX, ret+12(FP) |
| RET |
| |
| // func sbrk0() uintptr |
| TEXT runtime·sbrk0(SB),NOSPLIT,$0-4 |
| // Implemented as brk(NULL). |
| MOVL $SYS_brk, AX |
| MOVL $0, BX // NULL |
| INVOKE_SYSCALL |
| MOVL AX, ret+0(FP) |
| RET |