| // Copyright 2013 The Go Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style |
| // license that can be found in the LICENSE file. |
| |
| // +build amd64 amd64p32 |
| // +build darwin dragonfly freebsd linux nacl netbsd openbsd solaris |
| |
| package runtime |
| |
| import ( |
| "unsafe" |
| ) |
| |
| func dumpregs(c *sigctxt) { |
| print("rax ", hex(c.rax()), "\n") |
| print("rbx ", hex(c.rbx()), "\n") |
| print("rcx ", hex(c.rcx()), "\n") |
| print("rdx ", hex(c.rdx()), "\n") |
| print("rdi ", hex(c.rdi()), "\n") |
| print("rsi ", hex(c.rsi()), "\n") |
| print("rbp ", hex(c.rbp()), "\n") |
| print("rsp ", hex(c.rsp()), "\n") |
| print("r8 ", hex(c.r8()), "\n") |
| print("r9 ", hex(c.r9()), "\n") |
| print("r10 ", hex(c.r10()), "\n") |
| print("r11 ", hex(c.r11()), "\n") |
| print("r12 ", hex(c.r12()), "\n") |
| print("r13 ", hex(c.r13()), "\n") |
| print("r14 ", hex(c.r14()), "\n") |
| print("r15 ", hex(c.r15()), "\n") |
| print("rip ", hex(c.rip()), "\n") |
| print("rflags ", hex(c.rflags()), "\n") |
| print("cs ", hex(c.cs()), "\n") |
| print("fs ", hex(c.fs()), "\n") |
| print("gs ", hex(c.gs()), "\n") |
| } |
| |
| var crashing int32 |
| |
| // May run during STW, so write barriers are not allowed. |
| //go:nowritebarrier |
| func sighandler(sig uint32, info *siginfo, ctxt unsafe.Pointer, gp *g) { |
| _g_ := getg() |
| c := &sigctxt{info, ctxt} |
| |
| if sig == _SIGPROF { |
| sigprof(uintptr(c.rip()), uintptr(c.rsp()), 0, gp, _g_.m) |
| return |
| } |
| |
| if GOOS == "darwin" { |
| // x86-64 has 48-bit virtual addresses. The top 16 bits must echo bit 47. |
| // The hardware delivers a different kind of fault for a malformed address |
| // than it does for an attempt to access a valid but unmapped address. |
| // OS X 10.9.2 mishandles the malformed address case, making it look like |
| // a user-generated signal (like someone ran kill -SEGV ourpid). |
| // We pass user-generated signals to os/signal, or else ignore them. |
| // Doing that here - and returning to the faulting code - results in an |
| // infinite loop. It appears the best we can do is rewrite what the kernel |
| // delivers into something more like the truth. The address used below |
| // has very little chance of being the one that caused the fault, but it is |
| // malformed, it is clearly not a real pointer, and if it does get printed |
| // in real life, people will probably search for it and find this code. |
| // There are no Google hits for b01dfacedebac1e or 0xb01dfacedebac1e |
| // as I type this comment. |
| if sig == _SIGSEGV && c.sigcode() == _SI_USER { |
| c.set_sigcode(_SI_USER + 1) |
| c.set_sigaddr(0xb01dfacedebac1e) |
| } |
| } |
| |
| flags := int32(_SigThrow) |
| if sig < uint32(len(sigtable)) { |
| flags = sigtable[sig].flags |
| } |
| if c.sigcode() != _SI_USER && flags&_SigPanic != 0 { |
| // Make it look like a call to the signal func. |
| // Have to pass arguments out of band since |
| // augmenting the stack frame would break |
| // the unwinding code. |
| gp.sig = sig |
| gp.sigcode0 = uintptr(c.sigcode()) |
| gp.sigcode1 = uintptr(c.sigaddr()) |
| gp.sigpc = uintptr(c.rip()) |
| |
| if GOOS == "darwin" { |
| // Work around Leopard bug that doesn't set FPE_INTDIV. |
| // Look at instruction to see if it is a divide. |
| // Not necessary in Snow Leopard (si_code will be != 0). |
| if sig == _SIGFPE && gp.sigcode0 == 0 { |
| pc := (*[4]byte)(unsafe.Pointer(gp.sigpc)) |
| i := 0 |
| if pc[i]&0xF0 == 0x40 { // 64-bit REX prefix |
| i++ |
| } else if pc[i] == 0x66 { // 16-bit instruction prefix |
| i++ |
| } |
| if pc[i] == 0xF6 || pc[i] == 0xF7 { |
| gp.sigcode0 = _FPE_INTDIV |
| } |
| } |
| } |
| |
| // Only push runtime.sigpanic if rip != 0. |
| // If rip == 0, probably panicked because of a |
| // call to a nil func. Not pushing that onto sp will |
| // make the trace look like a call to runtime.sigpanic instead. |
| // (Otherwise the trace will end at runtime.sigpanic and we |
| // won't get to see who faulted.) |
| if c.rip() != 0 { |
| sp := c.rsp() |
| if regSize > ptrSize { |
| sp -= ptrSize |
| *(*uintptr)(unsafe.Pointer(uintptr(sp))) = 0 |
| } |
| sp -= ptrSize |
| *(*uintptr)(unsafe.Pointer(uintptr(sp))) = uintptr(c.rip()) |
| c.set_rsp(sp) |
| } |
| c.set_rip(uint64(funcPC(sigpanic))) |
| return |
| } |
| |
| if c.sigcode() == _SI_USER || flags&_SigNotify != 0 { |
| if sigsend(sig) { |
| return |
| } |
| } |
| |
| if flags&_SigKill != 0 { |
| exit(2) |
| } |
| |
| if flags&_SigThrow == 0 { |
| return |
| } |
| |
| _g_.m.throwing = 1 |
| _g_.m.caughtsig.set(gp) |
| |
| if crashing == 0 { |
| startpanic() |
| } |
| |
| if sig < uint32(len(sigtable)) { |
| print(sigtable[sig].name, "\n") |
| } else { |
| print("Signal ", sig, "\n") |
| } |
| |
| print("PC=", hex(c.rip()), " m=", _g_.m.id, "\n") |
| if _g_.m.lockedg != nil && _g_.m.ncgo > 0 && gp == _g_.m.g0 { |
| print("signal arrived during cgo execution\n") |
| gp = _g_.m.lockedg |
| } |
| print("\n") |
| |
| var docrash bool |
| if gotraceback(&docrash) > 0 { |
| goroutineheader(gp) |
| tracebacktrap(uintptr(c.rip()), uintptr(c.rsp()), 0, gp) |
| if crashing > 0 && gp != _g_.m.curg && _g_.m.curg != nil && readgstatus(_g_.m.curg)&^_Gscan == _Grunning { |
| // tracebackothers on original m skipped this one; trace it now. |
| goroutineheader(_g_.m.curg) |
| traceback(^uintptr(0), ^uintptr(0), 0, gp) |
| } else if crashing == 0 { |
| tracebackothers(gp) |
| print("\n") |
| } |
| dumpregs(c) |
| } |
| |
| if docrash { |
| // TODO(rsc): Implement raiseproc on other systems |
| // and then add to this if condition. |
| if GOOS == "darwin" || GOOS == "linux" { |
| crashing++ |
| if crashing < sched.mcount { |
| // There are other m's that need to dump their stacks. |
| // Relay SIGQUIT to the next m by sending it to the current process. |
| // All m's that have already received SIGQUIT have signal masks blocking |
| // receipt of any signals, so the SIGQUIT will go to an m that hasn't seen it yet. |
| // When the last m receives the SIGQUIT, it will fall through to the call to |
| // crash below. Just in case the relaying gets botched, each m involved in |
| // the relay sleeps for 5 seconds and then does the crash/exit itself. |
| // In expected operation, the last m has received the SIGQUIT and run |
| // crash/exit and the process is gone, all long before any of the |
| // 5-second sleeps have finished. |
| print("\n-----\n\n") |
| raiseproc(_SIGQUIT) |
| usleep(5 * 1000 * 1000) |
| } |
| } |
| crash() |
| } |
| |
| exit(2) |
| } |