| // Copyright 2009 The Go Authors. All rights reserved. | |
| // Use of this source code is governed by a BSD-style | |
| // license that can be found in the LICENSE file. | |
| package runtime | |
| import ( | |
| "internal/abi" | |
| "internal/goarch" | |
| "internal/goexperiment" | |
| "internal/runtime/math" | |
| "internal/runtime/sys" | |
| "unsafe" | |
| ) | |
| type slice struct { | |
| array unsafe.Pointer | |
| len int | |
| cap int | |
| } | |
| // A notInHeapSlice is a slice backed by internal/runtime/sys.NotInHeap memory. | |
| type notInHeapSlice struct { | |
| array *notInHeap | |
| len int | |
| cap int | |
| } | |
| func panicmakeslicelen() { | |
| panic(errorString("makeslice: len out of range")) | |
| } | |
| func panicmakeslicecap() { | |
| panic(errorString("makeslice: cap out of range")) | |
| } | |
| // makeslicecopy allocates a slice of "tolen" elements of type "et", | |
| // then copies "fromlen" elements of type "et" into that new allocation from "from". | |
| func makeslicecopy(et *_type, tolen int, fromlen int, from unsafe.Pointer) unsafe.Pointer { | |
| var tomem, copymem uintptr | |
| if uintptr(tolen) > uintptr(fromlen) { | |
| var overflow bool | |
| tomem, overflow = math.MulUintptr(et.Size_, uintptr(tolen)) | |
| if overflow || tomem > maxAlloc || tolen < 0 { | |
| panicmakeslicelen() | |
| } | |
| copymem = et.Size_ * uintptr(fromlen) | |
| } else { | |
| // fromlen is a known good length providing and equal or greater than tolen, | |
| // thereby making tolen a good slice length too as from and to slices have the | |
| // same element width. | |
| tomem = et.Size_ * uintptr(tolen) | |
| copymem = tomem | |
| } | |
| var to unsafe.Pointer | |
| if !et.Pointers() { | |
| to = mallocgc(tomem, nil, false) | |
| if copymem < tomem { | |
| memclrNoHeapPointers(add(to, copymem), tomem-copymem) | |
| } | |
| } else { | |
| // Note: can't use rawmem (which avoids zeroing of memory), because then GC can scan uninitialized memory. | |
| to = mallocgc(tomem, et, true) | |
| if copymem > 0 && writeBarrier.enabled { | |
| // Only shade the pointers in old.array since we know the destination slice to | |
| // only contains nil pointers because it has been cleared during alloc. | |
| // | |
| // It's safe to pass a type to this function as an optimization because | |
| // from and to only ever refer to memory representing whole values of | |
| // type et. See the comment on bulkBarrierPreWrite. | |
| bulkBarrierPreWriteSrcOnly(uintptr(to), uintptr(from), copymem, et) | |
| } | |
| } | |
| if raceenabled { | |
| callerpc := sys.GetCallerPC() | |
| pc := abi.FuncPCABIInternal(makeslicecopy) | |
| racereadrangepc(from, copymem, callerpc, pc) | |
| } | |
| if msanenabled { | |
| msanread(from, copymem) | |
| } | |
| if asanenabled { | |
| asanread(from, copymem) | |
| } | |
| memmove(to, from, copymem) | |
| return to | |
| } | |
| // makeslice should be an internal detail, | |
| // but widely used packages access it using linkname. | |
| // Notable members of the hall of shame include: | |
| // - github.com/bytedance/sonic | |
| // | |
| // Do not remove or change the type signature. | |
| // See go.dev/issue/67401. | |
| // | |
| //go:linkname makeslice | |
| func makeslice(et *_type, len, cap int) unsafe.Pointer { | |
| mem, overflow := math.MulUintptr(et.Size_, uintptr(cap)) | |
| if overflow || mem > maxAlloc || len < 0 || len > cap { | |
| // NOTE: Produce a 'len out of range' error instead of a | |
| // 'cap out of range' error when someone does make([]T, bignumber). | |
| // 'cap out of range' is true too, but since the cap is only being | |
| // supplied implicitly, saying len is clearer. | |
| // See golang.org/issue/4085. | |
| mem, overflow := math.MulUintptr(et.Size_, uintptr(len)) | |
| if overflow || mem > maxAlloc || len < 0 { | |
| panicmakeslicelen() | |
| } | |
| panicmakeslicecap() | |
| } | |
| return mallocgc(mem, et, true) | |
| } | |
| func makeslice64(et *_type, len64, cap64 int64) unsafe.Pointer { | |
| len := int(len64) | |
| if int64(len) != len64 { | |
| panicmakeslicelen() | |
| } | |
| cap := int(cap64) | |
| if int64(cap) != cap64 { | |
| panicmakeslicecap() | |
| } | |
| return makeslice(et, len, cap) | |
| } | |
| // growslice allocates new backing store for a slice. | |
| // | |
| // arguments: | |
| // | |
| // oldPtr = pointer to the slice's backing array | |
| // newLen = new length (= oldLen + num) | |
| // oldCap = original slice's capacity. | |
| // num = number of elements being added | |
| // et = element type | |
| // | |
| // return values: | |
| // | |
| // newPtr = pointer to the new backing store | |
| // newLen = same value as the argument | |
| // newCap = capacity of the new backing store | |
| // | |
| // Requires that uint(newLen) > uint(oldCap). | |
| // Assumes the original slice length is newLen - num | |
| // | |
| // A new backing store is allocated with space for at least newLen elements. | |
| // Existing entries [0, oldLen) are copied over to the new backing store. | |
| // Added entries [oldLen, newLen) are not initialized by growslice | |
| // (although for pointer-containing element types, they are zeroed). They | |
| // must be initialized by the caller. | |
| // Trailing entries [newLen, newCap) are zeroed. | |
| // | |
| // growslice's odd calling convention makes the generated code that calls | |
| // this function simpler. In particular, it accepts and returns the | |
| // new length so that the old length is not live (does not need to be | |
| // spilled/restored) and the new length is returned (also does not need | |
| // to be spilled/restored). | |
| // | |
| // growslice should be an internal detail, | |
| // but widely used packages access it using linkname. | |
| // Notable members of the hall of shame include: | |
| // - github.com/bytedance/sonic | |
| // - github.com/chenzhuoyu/iasm | |
| // - github.com/cloudwego/dynamicgo | |
| // - github.com/ugorji/go/codec | |
| // | |
| // Do not remove or change the type signature. | |
| // See go.dev/issue/67401. | |
| // | |
| //go:linkname growslice | |
| func growslice(oldPtr unsafe.Pointer, newLen, oldCap, num int, et *_type) slice { | |
| oldLen := newLen - num | |
| if raceenabled { | |
| callerpc := sys.GetCallerPC() | |
| racereadrangepc(oldPtr, uintptr(oldLen*int(et.Size_)), callerpc, abi.FuncPCABIInternal(growslice)) | |
| } | |
| if msanenabled { | |
| msanread(oldPtr, uintptr(oldLen*int(et.Size_))) | |
| } | |
| if asanenabled { | |
| asanread(oldPtr, uintptr(oldLen*int(et.Size_))) | |
| } | |
| if newLen < 0 { | |
| panic(errorString("growslice: len out of range")) | |
| } | |
| if et.Size_ == 0 { | |
| // append should not create a slice with nil pointer but non-zero len. | |
| // We assume that append doesn't need to preserve oldPtr in this case. | |
| return slice{unsafe.Pointer(&zerobase), newLen, newLen} | |
| } | |
| newcap := nextslicecap(newLen, oldCap) | |
| var overflow bool | |
| var lenmem, newlenmem, capmem uintptr | |
| // Specialize for common values of et.Size. | |
| // For 1 we don't need any division/multiplication. | |
| // For goarch.PtrSize, compiler will optimize division/multiplication into a shift by a constant. | |
| // For powers of 2, use a variable shift. | |
| noscan := !et.Pointers() | |
| switch { | |
| case et.Size_ == 1: | |
| lenmem = uintptr(oldLen) | |
| newlenmem = uintptr(newLen) | |
| capmem = roundupsize(uintptr(newcap), noscan) | |
| overflow = uintptr(newcap) > maxAlloc | |
| newcap = int(capmem) | |
| case et.Size_ == goarch.PtrSize: | |
| lenmem = uintptr(oldLen) * goarch.PtrSize | |
| newlenmem = uintptr(newLen) * goarch.PtrSize | |
| capmem = roundupsize(uintptr(newcap)*goarch.PtrSize, noscan) | |
| overflow = uintptr(newcap) > maxAlloc/goarch.PtrSize | |
| newcap = int(capmem / goarch.PtrSize) | |
| case isPowerOfTwo(et.Size_): | |
| var shift uintptr | |
| if goarch.PtrSize == 8 { | |
| // Mask shift for better code generation. | |
| shift = uintptr(sys.TrailingZeros64(uint64(et.Size_))) & 63 | |
| } else { | |
| shift = uintptr(sys.TrailingZeros32(uint32(et.Size_))) & 31 | |
| } | |
| lenmem = uintptr(oldLen) << shift | |
| newlenmem = uintptr(newLen) << shift | |
| capmem = roundupsize(uintptr(newcap)<<shift, noscan) | |
| overflow = uintptr(newcap) > (maxAlloc >> shift) | |
| newcap = int(capmem >> shift) | |
| capmem = uintptr(newcap) << shift | |
| default: | |
| lenmem = uintptr(oldLen) * et.Size_ | |
| newlenmem = uintptr(newLen) * et.Size_ | |
| capmem, overflow = math.MulUintptr(et.Size_, uintptr(newcap)) | |
| capmem = roundupsize(capmem, noscan) | |
| newcap = int(capmem / et.Size_) | |
| capmem = uintptr(newcap) * et.Size_ | |
| } | |
| // The check of overflow in addition to capmem > maxAlloc is needed | |
| // to prevent an overflow which can be used to trigger a segfault | |
| // on 32bit architectures with this example program: | |
| // | |
| // type T [1<<27 + 1]int64 | |
| // | |
| // var d T | |
| // var s []T | |
| // | |
| // func main() { | |
| // s = append(s, d, d, d, d) | |
| // print(len(s), "\n") | |
| // } | |
| if overflow || capmem > maxAlloc { | |
| panic(errorString("growslice: len out of range")) | |
| } | |
| var p unsafe.Pointer | |
| if !et.Pointers() { | |
| p = mallocgc(capmem, nil, false) | |
| // The append() that calls growslice is going to overwrite from oldLen to newLen. | |
| // Only clear the part that will not be overwritten. | |
| // The reflect_growslice() that calls growslice will manually clear | |
| // the region not cleared here. | |
| memclrNoHeapPointers(add(p, newlenmem), capmem-newlenmem) | |
| } else { | |
| // Note: can't use rawmem (which avoids zeroing of memory), because then GC can scan uninitialized memory. | |
| p = mallocgc(capmem, et, true) | |
| if lenmem > 0 && writeBarrier.enabled { | |
| // Only shade the pointers in oldPtr since we know the destination slice p | |
| // only contains nil pointers because it has been cleared during alloc. | |
| // | |
| // It's safe to pass a type to this function as an optimization because | |
| // from and to only ever refer to memory representing whole values of | |
| // type et. See the comment on bulkBarrierPreWrite. | |
| bulkBarrierPreWriteSrcOnly(uintptr(p), uintptr(oldPtr), lenmem-et.Size_+et.PtrBytes, et) | |
| } | |
| } | |
| memmove(p, oldPtr, lenmem) | |
| return slice{p, newLen, newcap} | |
| } | |
| // growsliceNoAlias is like growslice but only for the case where | |
| // we know that oldPtr is not aliased. | |
| // | |
| // In other words, the caller must know that there are no other references | |
| // to the backing memory of the slice being grown aside from the slice header | |
| // that will be updated with new backing memory when growsliceNoAlias | |
| // returns, and therefore oldPtr must be the only pointer to its referent | |
| // aside from the slice header updated by the returned slice. | |
| // | |
| // In addition, oldPtr must point to the start of the allocation and match | |
| // the pointer that was returned by mallocgc. In particular, oldPtr must not | |
| // be an interior pointer, such as after a reslice. | |
| // | |
| // See freegc for details. | |
| func growsliceNoAlias(oldPtr unsafe.Pointer, newLen, oldCap, num int, et *_type) slice { | |
| s := growslice(oldPtr, newLen, oldCap, num, et) | |
| if goexperiment.RuntimeFreegc && oldPtr != nil && oldPtr != s.array { | |
| if gp := getg(); uintptr(oldPtr) < gp.stack.lo || gp.stack.hi <= uintptr(oldPtr) { | |
| // oldPtr does not point into the current stack, and it is not | |
| // the data pointer for s after the grow, so attempt to free it. | |
| // (Note that freegc also verifies that oldPtr does not point into our stack, | |
| // but checking here first is slightly cheaper for the case when | |
| // oldPtr is on the stack and freegc would be a no-op.) | |
| // | |
| // TODO(thepudds): it may be that oldPtr==s.array only when elemsize==0, | |
| // so perhaps we could prohibit growsliceNoAlias being called in that case | |
| // and eliminate that check here, or alternatively, we could lean into | |
| // freegc being a no-op for zero-sized allocations (that is, no check of | |
| // oldPtr != s.array here and just let freegc return quickly). | |
| noscan := !et.Pointers() | |
| freegc(oldPtr, uintptr(oldCap)*et.Size_, noscan) | |
| } | |
| } | |
| return s | |
| } | |
| // nextslicecap computes the next appropriate slice length. | |
| func nextslicecap(newLen, oldCap int) int { | |
| newcap := oldCap | |
| doublecap := newcap + newcap | |
| if newLen > doublecap { | |
| return newLen | |
| } | |
| const threshold = 256 | |
| if oldCap < threshold { | |
| return doublecap | |
| } | |
| for { | |
| // Transition from growing 2x for small slices | |
| // to growing 1.25x for large slices. This formula | |
| // gives a smooth-ish transition between the two. | |
| newcap += (newcap + 3*threshold) >> 2 | |
| // We need to check `newcap >= newLen` and whether `newcap` overflowed. | |
| // newLen is guaranteed to be larger than zero, hence | |
| // when newcap overflows then `uint(newcap) > uint(newLen)`. | |
| // This allows to check for both with the same comparison. | |
| if uint(newcap) >= uint(newLen) { | |
| break | |
| } | |
| } | |
| // Set newcap to the requested cap when | |
| // the newcap calculation overflowed. | |
| if newcap <= 0 { | |
| return newLen | |
| } | |
| return newcap | |
| } | |
| // reflect_growslice should be an internal detail, | |
| // but widely used packages access it using linkname. | |
| // Notable members of the hall of shame include: | |
| // - github.com/cloudwego/dynamicgo | |
| // | |
| // Do not remove or change the type signature. | |
| // See go.dev/issue/67401. | |
| // | |
| //go:linkname reflect_growslice reflect.growslice | |
| func reflect_growslice(et *_type, old slice, num int) slice { | |
| // Semantically equivalent to slices.Grow, except that the caller | |
| // is responsible for ensuring that old.len+num > old.cap. | |
| num -= old.cap - old.len // preserve memory of old[old.len:old.cap] | |
| new := growslice(old.array, old.cap+num, old.cap, num, et) | |
| // growslice does not zero out new[old.cap:new.len] since it assumes that | |
| // the memory will be overwritten by an append() that called growslice. | |
| // Since the caller of reflect_growslice is not append(), | |
| // zero out this region before returning the slice to the reflect package. | |
| if !et.Pointers() { | |
| oldcapmem := uintptr(old.cap) * et.Size_ | |
| newlenmem := uintptr(new.len) * et.Size_ | |
| memclrNoHeapPointers(add(new.array, oldcapmem), newlenmem-oldcapmem) | |
| } | |
| new.len = old.len // preserve the old length | |
| return new | |
| } | |
| func isPowerOfTwo(x uintptr) bool { | |
| return x&(x-1) == 0 | |
| } | |
| // slicecopy is used to copy from a string or slice of pointerless elements into a slice. | |
| func slicecopy(toPtr unsafe.Pointer, toLen int, fromPtr unsafe.Pointer, fromLen int, width uintptr) int { | |
| if fromLen == 0 || toLen == 0 { | |
| return 0 | |
| } | |
| n := fromLen | |
| if toLen < n { | |
| n = toLen | |
| } | |
| if width == 0 { | |
| return n | |
| } | |
| size := uintptr(n) * width | |
| if raceenabled { | |
| callerpc := sys.GetCallerPC() | |
| pc := abi.FuncPCABIInternal(slicecopy) | |
| racereadrangepc(fromPtr, size, callerpc, pc) | |
| racewriterangepc(toPtr, size, callerpc, pc) | |
| } | |
| if msanenabled { | |
| msanread(fromPtr, size) | |
| msanwrite(toPtr, size) | |
| } | |
| if asanenabled { | |
| asanread(fromPtr, size) | |
| asanwrite(toPtr, size) | |
| } | |
| if size == 1 { // common case worth about 2x to do here | |
| // TODO: is this still worth it with new memmove impl? | |
| *(*byte)(toPtr) = *(*byte)(fromPtr) // known to be a byte pointer | |
| } else { | |
| memmove(toPtr, fromPtr, size) | |
| } | |
| return n | |
| } | |
| //go:linkname bytealg_MakeNoZero internal/bytealg.MakeNoZero | |
| func bytealg_MakeNoZero(len int) []byte { | |
| if uintptr(len) > maxAlloc { | |
| panicmakeslicelen() | |
| } | |
| cap := roundupsize(uintptr(len), true) | |
| return unsafe.Slice((*byte)(mallocgc(cap, nil, false)), cap)[:len] | |
| } | |
| // moveSlice copies the input slice to the heap and returns it. | |
| // et is the element type of the slice. | |
| func moveSlice(et *_type, old unsafe.Pointer, len, cap int) (unsafe.Pointer, int, int) { | |
| if cap == 0 { | |
| if old != nil { | |
| old = unsafe.Pointer(&zerobase) | |
| } | |
| return old, 0, 0 | |
| } | |
| capmem := uintptr(cap) * et.Size_ | |
| new := mallocgc(capmem, et, true) | |
| bulkBarrierPreWriteSrcOnly(uintptr(new), uintptr(old), capmem, et) | |
| memmove(new, old, capmem) | |
| return new, len, cap | |
| } | |
| // moveSliceNoScan is like moveSlice except the element type is known to | |
| // not have any pointers. We instead pass in the size of the element. | |
| func moveSliceNoScan(elemSize uintptr, old unsafe.Pointer, len, cap int) (unsafe.Pointer, int, int) { | |
| if cap == 0 { | |
| if old != nil { | |
| old = unsafe.Pointer(&zerobase) | |
| } | |
| return old, 0, 0 | |
| } | |
| capmem := uintptr(cap) * elemSize | |
| new := mallocgc(capmem, nil, false) | |
| memmove(new, old, capmem) | |
| return new, len, cap | |
| } | |
| // moveSliceNoCap is like moveSlice, but can pick any appropriate capacity | |
| // for the returned slice. | |
| // Elements between len and cap in the returned slice will be zeroed. | |
| func moveSliceNoCap(et *_type, old unsafe.Pointer, len int) (unsafe.Pointer, int, int) { | |
| if len == 0 { | |
| if old != nil { | |
| old = unsafe.Pointer(&zerobase) | |
| } | |
| return old, 0, 0 | |
| } | |
| lenmem := uintptr(len) * et.Size_ | |
| capmem := roundupsize(lenmem, false) | |
| cap := capmem / et.Size_ | |
| new := mallocgc(cap*et.Size_, et, true) | |
| bulkBarrierPreWriteSrcOnly(uintptr(new), uintptr(old), lenmem, et) | |
| memmove(new, old, lenmem) | |
| return new, len, int(cap) | |
| } | |
| // moveSliceNoCapNoScan is a combination of moveSliceNoScan and moveSliceNoCap. | |
| func moveSliceNoCapNoScan(elemSize uintptr, old unsafe.Pointer, len int) (unsafe.Pointer, int, int) { | |
| if len == 0 { | |
| if old != nil { | |
| old = unsafe.Pointer(&zerobase) | |
| } | |
| return old, 0, 0 | |
| } | |
| lenmem := uintptr(len) * elemSize | |
| capmem := roundupsize(lenmem, true) | |
| new := mallocgc(capmem, nil, false) | |
| memmove(new, old, lenmem) | |
| if capmem > lenmem { | |
| memclrNoHeapPointers(add(new, lenmem), capmem-lenmem) | |
| } | |
| return new, len, int(capmem / elemSize) | |
| } | |
| // growsliceBuf is like growslice, but we can use the given buffer | |
| // as a backing store if we want. bufPtr must be on the stack. | |
| func growsliceBuf(oldPtr unsafe.Pointer, newLen, oldCap, num int, et *_type, bufPtr unsafe.Pointer, bufLen int) slice { | |
| if newLen > bufLen { | |
| // Doesn't fit, process like a normal growslice. | |
| return growslice(oldPtr, newLen, oldCap, num, et) | |
| } | |
| oldLen := newLen - num | |
| if oldPtr != bufPtr && oldLen != 0 { | |
| // Move data to start of buffer. | |
| // Note: bufPtr is on the stack, so no write barrier needed. | |
| memmove(bufPtr, oldPtr, uintptr(oldLen)*et.Size_) | |
| } | |
| // Pick a new capacity. | |
| // | |
| // Unlike growslice, we don't need to double the size each time. | |
| // The work done here is not proportional to the length of the slice. | |
| // (Unless the memmove happens above, but that is rare, and in any | |
| // case there are not many elements on this path.) | |
| // | |
| // Instead, we try to just bump up to the next size class. | |
| // This will ensure that we don't waste any space when we eventually | |
| // call moveSlice with the resulting slice. | |
| newCap := int(roundupsize(uintptr(newLen)*et.Size_, !et.Pointers()) / et.Size_) | |
| // Zero slice beyond newLen. | |
| // The buffer is stack memory, so NoHeapPointers is ok. | |
| // Caller will overwrite [oldLen:newLen], so we don't need to zero that portion. | |
| // If et.Pointers(), buffer is at least initialized so we don't need to | |
| // worry about the caller overwriting junk in [oldLen:newLen]. | |
| if newLen < newCap { | |
| memclrNoHeapPointers(add(bufPtr, uintptr(newLen)*et.Size_), uintptr(newCap-newLen)*et.Size_) | |
| } | |
| return slice{bufPtr, newLen, newCap} | |
| } | |
| // growsliceBufNoAlias is a combination of growsliceBuf and growsliceNoAlias. | |
| // bufPtr must be on the stack. | |
| func growsliceBufNoAlias(oldPtr unsafe.Pointer, newLen, oldCap, num int, et *_type, bufPtr unsafe.Pointer, bufLen int) slice { | |
| s := growsliceBuf(oldPtr, newLen, oldCap, num, et, bufPtr, bufLen) | |
| if goexperiment.RuntimeFreegc && oldPtr != bufPtr && oldPtr != nil && oldPtr != s.array { | |
| // oldPtr is not bufPtr (the stack buffer) and it is not | |
| // the data pointer for s after the grow, so attempt to free it. | |
| // (Note that freegc does a broader check that oldPtr does not point into our stack, | |
| // but checking here first is slightly cheaper for a common case when oldPtr is bufPtr | |
| // and freegc would be a no-op.) | |
| // | |
| // TODO(thepudds): see related TODO in growsliceNoAlias about possibly eliminating | |
| // the oldPtr != s.array check. | |
| noscan := !et.Pointers() | |
| freegc(oldPtr, uintptr(oldCap)*et.Size_, noscan) | |
| } | |
| return s | |
| } |