Go mobile subrepository adds support for mobile platforms (Android and iOS) and provides tools to build mobile applications.

There are two strategies you can follow to include Go into your mobile stack:

- Writing all-Go native mobile applications.
- Writing SDK applications by generating bindings from a Go package and invoke them from Java (on Android) and Objective-C (on iOS).

This article will contain step-by-step guides to explain how to achieve
these strategies.

- [Tools](#tools)
- [Native applications](#native-applications)
  - [Building and deploying to Android](#building-and-deploying-to-android)
  - [Building and deploying to iOS](#building-and-deploying-to-ios)
- [SDK applications](#sdk-applications-and-generating-bindings)
  - [Building and deploying to Android](#building-and-deploying-to-android-1)
  - [Building and deploying to iOS](#building-and-deploying-to-ios)
  - [iOS Simulator](#ios-simulator)

## Tools

Note: You need to have [Go 1.5 or above](https://golang.org/dl/) to install mobile tools. (Or at least Go 1.7.4 if using macOS Sierra)

Go Mobile introduces a new tool, [gomobile](https://golang.org/x/mobile/cmd/gomobile),
to help you with the build and the binding process.
Go get gomobile and initialize it to install the required toolchain.

On OS X, you will need to have
[Xcode Command Line Tools](https://developer.apple.com/downloads/)
installed.

```
$ go get golang.org/x/mobile/cmd/gomobile
$ gomobile init # it might take a few minutes
```

(The following sections will help you how to use the gomobile tool.)

## Native applications

Native category includes applications entirely written in Go. Currently, the
[golang.org/x/mobile](https://godoc.org/golang.org/x/mobile)
contains only a small set of packages that focus on:

* App control and configuration
* OpenGL ES 2 bindings
* Asset management
* Event management
* Experimental packages include OpenAL bindings, audio, font, sprite and motion sensors

There are various example native applications under [golang.org/x/mobile/example](https://golang.org/x/mobile/example). We will build and deploy the basic example both to an Android and iOS device.

Grab the application.

```
$ go get -d golang.org/x/mobile/example/basic
```

### Building and deploying to Android

Run `gomobile build` to build an Android APK.

```
$ gomobile build -target=android golang.org/x/mobile/example/basic
```

Build command will build an APK named basic.apk.

If an AndroidManifest.xml is defined in the package directory, it is added to the APK output. Otherwise, a default manifest is generated.

If you have [adb](http://developer.android.com/tools/help/adb.html) command installed on your machine, you can use `gomobile install` to build and push the APK to your mobile device.

```
$ gomobile install golang.org/x/mobile/example/basic
```

### Building and deploying to iOS
Run `gomobile build` to build the package as an iOS application.

Note: target=ios requires the host machine running OS X. You need to obtain a [signing identity and download provisioning profiles](https://developer.apple.com/library/ios/recipes/xcode_help-accounts_preferences/articles/obtain_certificates_and_provisioning_profiles.html) in order to continue.

```
$ gomobile build -target=ios golang.org/x/mobile/example/basic
```

The build command will build an application bundle, named basic.app.

You can deploy .app files by dragging and dropping them to the device.

* In Xcode, open Window > Devices.
* Select the physical device from the left pane.
* Drag and drop the .app file to "Installed Apps" section.
* Check the "Copy items if needed" option

![Deploying app bundle](https://googledrive.com/host/0ByfSjdPVs9MZbkhjeUhMYzRTeEE/gowiki/gomobile-ios-deploy.png)

Alternatively, you can deploy application bundles to your iOS device by using the [ios-deploy](https://github.com/phonegap/ios-deploy) utility command line tool. Use ios-deploy to push the application to your device.

```
$ ios-deploy -b basic.app
```

## SDK applications and generating bindings

In this category, we will show you how you can use a Go package in
your existing Android or iOS application.

The advantages to follow this strategy:

* You can reuse a Go package from a mobile app without making significant changes to your existing application.
* In cases where you want to share a common code base between your Android and iOS application, you can write the common functionality once in Go and glue them to the platform-specific code by invoking the Go package through bindings.

Current limitations are listed below.

* Only a [subset of Go types](https://godoc.org/golang.org/x/mobile/cmd/gobind) are currently supported.
* Language bindings have a performance overhead.
* There are a few limitations on how the exported APIs should look due to the limitations of the target language.

We will use the example package under [golang.org/x/mobile/example/bind/hello](https://golang.org/x/mobile/example/bind/hello) to generate bindings and invoke Greetings function from Java and Objective-C.

Grab the example by running the command below.

```
$ go get -d golang.org/x/mobile/example/bind/...
```

### Building and deploying to Android

Note: Currently only ARM devices and ARM emulating AVDs are supported.

If you are using Android Studio, you can use the [Gradle plugin](https://plugins.gradle.org/plugin/org.golang.mobile.bind) to automate this process.

* Launch Android Studio.
* File > Import Project... to import the reference project from $GOPATH/src/golang.org/x/mobile/example/bind/android.

![Xcode project layout with hello.framework](https://googledrive.com/host/0ByfSjdPVs9MZbkhjeUhMYzRTeEE/gowiki/gomobile-import-androidstudio.png)

* Open hello/build.gradle to edit the absolute path to GOPATH and GO.
* Build and deploy the application to the device.

The app module contains the main application that invokes the `hello.Greetings`. When application is launched the text view is updated with the string returned value.

If you are not using Android Studio, in order to work with bindings for Android, you need to have [Android SDK](https://developer.android.com/sdk/index.html#Other) installed and ANDROID_HOME environment variable set to the SDK path.

```
$ gomobile bind -target=android golang.org/x/mobile/example/bind/hello
```

The command above will generate an [aar](http://tools.android.com/tech-docs/new-build-system/aar-format)  that can be importable by your IDE.

### Building and deploying to iOS

Note: target=ios requires the host machine running OS X.

```
$ cd $GOPATH/src/golang.org/x/mobile/example/bind
$ gomobile bind -target=ios golang.org/x/mobile/example/bind/hello
```

Gomobile bind will generate a framework bundle called `Hello.framework`. Open the sample XCode project by running the command below.

```
$ open ios/bind.xcodeproj
```
Drag and drop the `Hello.framework` bundle to the Xcode project. Check "Copy items if needed" if you need a different copy of the framework bundle within the Xcode otherwise. Otherwise, modifying the Go package source code and rerunning `gomobile bind` will update the hello.framework.

![Drag and drop Hello.framework](https://googledrive.com/host/0ByfSjdPVs9MZbkhjeUhMYzRTeEE/gowiki/gomobile-bind-iosdrag.png)

Your project layout should look like what's shown below.

![Xcode project layout with Hello.framework](https://googledrive.com/host/0ByfSjdPVs9MZbkhjeUhMYzRTeEE/gowiki/gomobile-bind-ios.png)

Build and run it on the simulator or an actual device (Cmd+R). When the application launches, the label on the main view will be modified with the string returned from `GoHelloGreetings` which invokes the `hello.Greetings` function.

Note that you can also invoke `GoHelloGreetings` from Swift by importing Hello.

```
@import Hello
// ...
let msg = Hello.GoHelloGreetings("gopher")
```

#### iOS Simulator

As of Go 1.5, only darwin/amd64 works on the iOS simulator. To use the simulator, you need to configure Xcode to only try to run 64-bit binaries.

Xcode matches the bit width of the ARM binaries when running on the X86 simulator. That is, if you configure Xcode to build both 32-bit and 64-bit ARM binaries (the default), it will attempt to run 32-bit X86 binaries on the simulator, which will not work with Go today. Modify the Xcode build settings to only build 64-bit ARM binaries, and the simulator will run the amd64 binary.