"gopls" settings to match gopls v0.6.2. (CL 279728)go installation path when go couldn't be found from the regular PATH (Issue 1065)A list of all issues and changes can be found in the v0.20.0 milestone.
📣 Announcement: We plan to enable the language server,
gopls, by default early next year. (Issue 1037)Please test and provide us your feedback on the
#vscode-devGophers Slack channel.
substitutePath config property allows users to translate their symlinked directories to the actual paths, and the local paths to the remote paths. See Launch Configurations and Remote Debugging for details.launch.json was added. (Issue 131)next is automatically cancelled by delve if interrupted, for example, because breakpoint is set. See Issue 787 for details. (CL 261078)tyf snippet for type name func() was added. (Issue 1002)gopls settings section definition based on gopls v0.6.0. (Issue 197, CL 278355)go.buildFlags and go.buildTags are propagated to gopls unless "gopls": {"buildFlags": ..} is set. (Issue 155)go.toolsManagement.checkForUpdates setting allows users to completely disable version checks. This deprecates go.useGoProxyToCheckForToolUpdates. (Issue 963)PATH setup issue. When go isn't found from PATH, the extension will check /usr/local/bin too (Issue 971).gopls if the existing version in the system is older than the minimum required version when the extension enables gopls automatically. (Issue 938)GOBIN setting. (CL 275877)go.overwriteGoplsMiddleware and marked deprecated settings.vsce package to detect packaging errors early.Thank you for your contribution, @hyangah, @suzmue, and @programmer04!
A list of all issues and changes can be found in the v0.19.1 milestone.
Run without Debugging for Windows. This was a regression found in v0.19.0 (Issue 918). godlvdap debug configuration from the stable version. It is still available in Go Nightly (Issue 960).Thank you for your contribution, @suzmue, @RomanKornev, @hyangah!
A list of all issues and changes can be found in the v0.19.0 milestone.
lispcase, pascalcase and keep as transform variants for go.addTags (Issue 906, 936) gomodifytags's --template flag (Issue 826) Thank you for your contribution, @pofl, @hyangah, @perrito666, @pjweinbgo, @quoctruong, @stamblerre, @skaldesh, and @suzmue!
A list of all issues and changes can be found in the v0.18.1 milestone.
Go: extract language server logs to editor command was added (CL 263526).Thank you for your contributions, @suzmue, @pjweinbgo!
Unified Go status UI ⚡, many debugger feature improvements, and LSP 3.16 features! A list of all issues fixed with this release can be found in the v0.18.0 milestone.
go.mod file, and more. The old Go Modules status bar was removed in favor of this new unified status bar. See VS Code Go UI documentation to learn more about this.Go: Toggle gc details command toggles the display of compiler optimization choice for the open Go source file (CL 256658).3.16. Users of recent gopls can access new features such as Call hierarchy and Semantic tokens.gopls config as LSP initialization options for correct workspace symbols computation (CL 259138).for statement snippet (Issue 734).vendor directories from go.inferGopath disable mechanism (Issue 301).go.logging.level setting allows extra logging to help debugging extension issues (CL 256557).Go: Show Survey Config and Go: Reset Survey Config commands are available.gopls. (CL 258997).go command chosen from the current GOROOT/bin. This helps avoid using a different version of go command for asdf or direnv users (Issue 757).Thank you for your contributions, @suzmue, @vologab, @amitlevy21, @danielhelfand, @egonk, @quoctruong, @polinasok, @pjweinbgo, @stamblerre, @hyangah!
go is not found from PATH available to the extension, the extension tries a couple of well-known default locations to find the go binary. In this case, we need to mutate PATH so other tools including gopls or dlv can choose the same go version. (Issue 713).PATH/Path environment variable only if users explicitly configure to select the go command using go.goroot, go.alternateTools, or Go: Choose Go Environment menu. (Issue 679)go.coverMode to be default. (Issue 666)Thank you for reporting issues!
Go code debugging and code coverage support is getting better.
The extension will help you stay updated with the new Go releases.
call command. E.g. call myAwesomeFunc(). It is an experimental feature in Delve. Please see the current limitations. (Issue 100)Go Update Available status bar item will appear. This feature is available only if go.useGoProxyToCheckForToolUpdates is set true. (Issue 483)go.coverMode setting allows to use different coverage modes (atomic, count, set (default)). go.coverShowCounts, go.coverageDecorator.{coveredBorderColor, uncoveredBorderColor} were newly added. We are still investigating better ways to visualize the count coverage data; feedback and contribution is welcome! (Issue 256, 594)'~' in the cwd attribute of the launch configuration. (Issue 116)showGlobalVariables is disabled by default, and this change improves speed. You can still inspect the global variables by registering them in the WATCH section, or by configuring showGlobalVariables in launch.json. (Issue 138)gofumpt, gofumports is added to recognized formatters list. (Issue 587)go.toolsEnvVars configuration is changed. (CL 254370)go env failures. (Issue 555)GOROOT when invoking the gopkgs tool so gopkgs continues to work with different go versions without being recompiled. (CL 254137)Go: Locate Configured Go Tools are invoked. (Issue 457)GOROOT/bin to integrated terminal's PATH environment variable when go.goroot is set on OS X. (Issue 544)envFile in the launch configuration. We reworked how the environment variables configuration is processed during this cycle. Now the extension processes the envFile attribute instead of asking the debug adapter process to read the specified envFile. (Issue 452)go.installDependenciesWhenBuilding by default. When this is enabled, the extension runs go commands with -i, which is no longer recommended with recent versions of Go. (Issue 568)run test CodeLenses to gopls. This experimental feature can be enabled with the following setting:"go.useLanguageServer": true,
"gopls": {
"codelens": { "test": true }
}
Thank you for your contribution, @suzmue, @pjweinbgo, @ekulabuhov, @stamblerre, @tpbg, @FiloSottile, @findleyr, @quoctruong, @polinasok, @hyangah!
"go.alternateTools" settings to accept any tool names without settings.json diagnostics warning. (Issue 526)go.goroot and go.toolsEnvVars (Issue 464, 413).This version requires VS Code 1.46+.
Older versions of VS Code will not receive updates any more.
Go: Choose Go Environment command. When clicking the Go status bar that displays the currently active Go version, users will be prompted with the list of Go versions installed locally or available for download. This feature was built based on the golang.org/dl tools. The selected Go version applies to the workspace, takes precedence over the system default or the "go.goroot" and "go.alternateTools" settings, and persists across sessions. You can clear the choice by selecting the Clear Selection item. (Issue 253)$GOROOT/bin to the PATH or Path environment variable which then applies the change to the integrated terminal windows.launch type requests in debug or test mode. This is still in the early stages and requires dlv built from its unreleased, master branch. Subscribe to golang/vscode-go#23 for updates.Go: Apply Cover Profile applies code coverage for multiple packages (CL 238697). We fixed bugs in processing coverage profiles on Windows.go tool is found.GOMODCACHE environment variable, introduced in Go 1.15.-v option. This feature requires 1.14 or newer versions of Go (Issue 316).additionalProperties to false for the settings that don't expect more properties. This allows VS Code to handle these settings better in its new settings GUI (Issue 284).Go: Locate Configured Go Tools includes go env results (Issue 195).PATH environment variable adjustment when users use a wrapper as an alternate tool for go (CL 239697).gocode-gomod installation bug when GOPATH includes multiple directories (Issue 368).godef to locate standard packages correctly by passing the GOROOT environment variable.golangci-lint integration bug that prevented displaying the lint results correctly when linters like nolintlint are enabled (Issue 411).Go: Test Previous (Issue 269).json-rpc2 and lodash to address vulnerability reports from npm audit.Thank you for your contribution, fujimoto kyosuke, OneOfOne, Aditya Thakral, Oleg Butuzov, Rebecca Stambler, Peter Weinberger, Brayden Cloud, Eli Bendersky, Robert Findley, Hana Kim!
gopls error report suggestion and changed to send reports to the vscode-go issue tracker instead of the go issue tracker (cl/240506).preview note in the published extension (Issue 273).Go: Subtest At Cursor runs an individual subtest if the subtest's name is a simple string (cl/235447).go.trace.server controls tracing between VS Code and the language server (cl/232458). Unlike tracing using gopls flags, this controls client-side tracing, and does not require to restart the server to change the value. This client-side trace is presented in the gopls output channel. The server-side trace has been moved to the new gopls (server) output channel (cl/233598).GOROOT. We plan to add Go version switch, and other features using this status bar item.Go: Add Tags To Struct Fields prompts transform parameter input if the setting go.addTags.promptForTags is true (Issue 2546).Go: Locate Go Tools command output includes the GOBIN value. (cl/235197).go.gopath, go.goroot, go.toolsGopath are now machine-overridable (cl/236539, Issue 2981).GOROOT environment variable any more. go.goroot is used to select the go command under the specified directory (Issue 146).gopls version detection and upgrade logic when pre-release versions are involved (cl/235524).Run > Run Without Debugging (^F5) are now cleaned up when the run sessions end (cl/236879).go.alternateTools.go is set, the path to $(go env GOROOT)/bin is passed to underlying tools to ensure they use the same go version (cl/239697).pgrep on mac OS (cl/236538, Issue 90).Thank you for your contribution, Brayden Cloud, Bulent Rahim Kazanci, Eli Bendersky, Hana Kim, Polina Sokolova, Quoc Truong, Rebecca Stambler, Rohan Talip, Ryan Koski, Sean Caffery, Ted Silbernagel, Vincent Jo, and codekid!
This is the first version published with golang publisher ID. This version is functionally identical to 0.14.3 except the following modifications.
Rebecca Stambler (@stamblerre)
This is the last version published with ms-vscode publisher ID.
Go: Fill struct to work correctly when file has multi byte characters. PR 2611vscode-languageclient being used to make use of all the upstream fixes. This changes the min version of the VS Code for upcoming updates of this extension to be 1.41. Older versions of VS Code will no longer receive any updates from this extension.program attribute in the debug configuration pointing to a file, debug just the file and not the entire package. This allows one to debug single files when a folder has multiple files with the main function. Feature Request 1229 implemented with PR 3016go run . instead of passing the current file to the go run command when the command Run: Start Without Debugging command is executed with the program attribute in the debug configuration pointing to a folder. Previously, this would result in errors for cases when the current file uses members from a separate file in the same pacakge. Feature Request 3096 implemented with commit 78518d7eCarlton Henderson (@CarltonHenderson)
golangci-lint. PR 3112Alexandre Vilain (@alexandrevilain)
Go: Apply Cover Profile. PR 3119gopls release notes when prompting to update the tool.gopls with parameter hints is disabled , avoid showing the parameter hints after auto-completing a method. Fixes Bug 3075 with PR 3084Go: Locate Configured Go Tools that prints the location of the Go tools that this extension depends onRebecca Stambler (@stamblerre)
gopls get prompted to update the language server.Go: Apply Cover Profile to apply code coverage decorators from a custom cover profile. Feature Request 1596 implemented with PR 2361envFile in the debug configuration now supports configuring multiple env files. Feature Request 1746 implemented with PR 2395Jakub Warczarek (@programmer04)
index with i. Feature Request 2943 implemented with PR 3010go.languageServerExperimentalFeatures which allows you to disable experimental features from the language server has been trimmed the features that can be thus disabled to the below as rest of the features are deemed to be stable.Restart language server if the language server had not started successfully.go.coverOnSingleTestFile to enable applying code coverage resulting from running all tests in current file either using the code lens run file tests or the command Go: Test File. Feature Request 2873 implemented with PR 2884Don't show again to the warning that appears on saving changes to files when in the midst of debugging. Feature Request 2880 implemented with PR 2906go.addTags and go.removeTags settings as placeholders in the input boxes that appear when running the Go: Add Tags To Struct Fields and Go: Remove Tags From Struct Fields commands. Feature Request 2929 implemented with PR 2944go.buildTags and go.testTags are respected by the Go: Debug Test At Cursor command. Fixes Bug 2953 with commit d6b6668go.testFlags are treated as arguments and not build flags by delve when debugging tests. Fixes Bug 2115 with commit 9ab7b8bffRebecca Stambler (@stamblerre) & Ramya Rao (@ramya-rao-a)
gopls and prompt to update accordingly. This can be disabled using the new setting go.useGoProxyToCheckForToolUpdates.Rebecca Stambler (@stamblerre)
Go to Implementation feature when using the language server.Kaarthik Rao Bekal Radhakrishna (@karthikraobr)
highlight to go.languageServerExperimentalFeatures setting to allow disabling of the highlighting feature from language server. Fixes Bug 2664 with PR 2833nil value and zero length. Fixes Bug 2813 with PR 2839Go: Add Import command. Feature Request 2683 implemented with PR 2803gopls wiki and added link to recommended VS Code settings when using gopls. PR 2852Kegsay @Kegsay & Zac Bergquist (@zmb3)
Marcus Farkas (@ToothlessGear)
Go: Test All Packages In Workspace command failed to run tests since the last update.Go: Build Workspace command failed to run the build command since the last updategopls results in the extension throwing error & not working as expected since the last updatego vet . instead of go vet ./... when vetting current package for better performance.gopls that was introduced in the previous update, relied on making calls to https://proxy.golang.org. In this patch release, we replace such calls with a check against a known hard-coded value for the latest version of gopls. Details on the next steps here are captured in the issue 2776gopls can now be used when using Go from the tipgo.alternateTools setting to provide an alternative for gopls. PR 2660James George (@jamesgeorge007)
go.goroot and not go.gopath, go.toolsGopath setting to be of scope machine in order to support the latter two to be configured at worksapce level. More in this is discussed at 2576.output attribute in the debug configuration when mode is set to test. Fixes Bug 2445 with commit 373f0743goimports instead of the default goreturns as the formatting tool when using modules without the language server, now has the option to not be shown again for cases when you don't want to use goimports. Fixes Bug 2578 with commit 658db8d4go.goroot, go.gopath and go.toolsGopath settings to be of scope machine as per upstream request 2576 from VS Code to better support remote scenarios.@BetaXOi & Joel Hendrix (@jhendrixMSFT)
Please note the feature of attaching to a local process using process id only works when the process is started by running the compiled code i.e the executable and not by using the command go run. This is a limitation from delve.
Go: Restart Language Server to restart the language server which previously was possible only by reloading the VS Code window. Feature Request 2500 implemented with PR 2530Rebecca Stambler (@stamblerre)
gopls by default and add the feature to provide to clickable Godoc links for import statements. PR 2518incrementalSync to go.languageServerExperimentalFeatures setting. If true, the language server will accept incremental document synchronization. PR 2493${workspaceRoot} and ${workspaceFolder} for the -vetTtool flag provided in go.vetFlags setting. Feature Request 2527 implemented with PR 2528${workspaceRoot} and ${workspaceFolder} for the values provided to the go.alternateTools setting. Feature Request 2543 implemented with PR 2544gotype-live to provide diagnostics as you type only when the user is not using gopls and is not in module mode. This is because gopls supports this feature out of the box and the tool doesnt support modules. Fixes Bug 1950 with commit d1bf95c5This patch release has fixes for the below bugs
go.autocompleteUnimportedPackages is enabled, packages show up in completion list when typing . after a variable or existing package.gopls.This patch release has fixes for the below bugs
gopls crashes when -trace is set in the go.languageServerFlags settinggo.useLanguageServer is set to true, but no language server can be foundgo.mod and go.sum files, thus providing syntax highlighting for them. Feature Request 1886 implemented with PR 2344gopls, the language server from Google as the one from Sourcegraph is no longer under active development. Also because gopls supports Go modules. PR 2383. Please read our updated README on language servers for the latest on what we recommend.goimports for formatting when using Go modules without the language server because goreturns(the default formatting tool) doesn't work with modules yet. Fixes Bug 2309GO111MODULE is set to on inside the GOPATH. Fixes Bug 2238 with commit 15f571e4Go: Extract to functionGo: Extract to variableshowGlobalVariables property in the go.delveConfig setting. Feature Request 2323 implemented with PR 2351Filippo Valsorda (@FiloSottile) & Vlad Barosan (@vladbarosan)
go.toolsGopath is different between workspaces. PR 1589Jackson Kearl (@JacksonKearl) & Vlad Barosan (@vladbarosan)
GOBIN when user has set go.toolsGopath setting. Fixes Bug 2339 with commit 9f99c30ListPackageVars command in delve. PR 2289Adrian Suwała (@Ashiroq) & * Vlad Barosan (@vladbarosan)
Go: Debug Test at Cursor to debug the test function under the cursor. This provides the same feature as the debug codelens, but in the form of a command. Feature Request 1088 implemented with PR 2059proc.go file when stepping in/out during debugging. Fixes https://github.com/Microsoft/vscode/issues/65920LoggingDebugSession to show logs from the VS Code debug adapter. Feature Request 858 implemented with PR 2081log which would be the old verbose. The new verbose will include logs from the VS Code debug adapter.Go to definition feature now works on individual files. Fixes Bug 2246 with commit 58817b8Go to definition feature now works for sub modules as well. Fixes Bug 2180 with PR 2262go doc processes being spawned. Fixes Bug 2152 with commit e4522ba1. This is done using the flag -excludeDocs in the go.gocodeFlags setting.Kaarthik Rao Bekal Radhakrishna (@karthikraobr)
Go: Install/Update Tools command. [PR 2235](https://github.com/ Microsoft/vscode-go/pull/2235)Rebecca Stambler (@stamblerre)
GO111MODULE is explicitly set inside GOPATH.Kaarthik Rao Bekal Radhakrishna (@karthikraobr)
Go to Type Definition & Peek to Type Definition commands. Feature Request 2121 implemented with PR 2136Kaarthik Rao Bekal Radhakrishna (@karthikraobr)
Copy Value, Copy as expression and Add to Watch features in the context menu on the variables pane in the debug viewlet. Feature Request 1990 implemented with PR 2020go.gopath & go.toolsGopath settings now support the use of environment variables using the format ${env:XXX}. Feature Request 1732 implemented with PR 1743nsf/gocode when using Go version 1.8 or older due to mdempsky/gocode#73golint and gogetdoc are no longer supported in Go version 1.8 or oldergo doc instead of godoc for the showing the documentation when hovering over symbols and the Signature Help widget.Engineering Updates
Documentation Updates
Fix for issue with installing/updating tools when using the Go: Install/Update Tools command. Bug 2024 fixed by Kaarthik Rao Bekal Radhakrishna (@karthikraobr) and Ramya Rao (@ramya-rao-a)
file to go.lintOnSave setting to enable linting just the current file instead of package/workspace on file save. Feature Request 1931 implemented with PR 1965select statements. PR 2004Go: Show All Commands feature. Feature Request 1822 implmented with PR 1952ShowerYing (@showerying), Ramya Rao (@ramya-rao-a)
godoc from the list of installable Go tools as it doesnt support CLI mode anymore. Use godoc binary which is shipped as part of the Go distribution instead.go.gocodePackageLookupMode setting. Note: This only applies when using nsf/gocode. Latest versions of the Go extension uses mdempsky/gocode by default. PR 1908go.gotoSymbol.includeImports was enabled.Documentation Updates
Engineering Updates
Nguyen Long Nhat (@torn4dom4n)
$workspaceRoot with $workspaceFolder. PR 1977Analysis Tools Missing warning for the forks of godef and gocode. They are needed only when using Go modules and there are prompts to install them when the extension detects the use of modules.Rebecca Stambler (@stamblerre)
godef and gocode to provide Go to definition and Auto-completion features respectively when using Go modules. The binaries installed from these forks will have the suffix -gomod and will only be used when you use Go modules.Bianca Rosa de Mendonça (@biancarosa)
Go: Benchmark File, Go: Benchmark Package and codelens to run all the benchmarks in current file & package respectively. Feature Request 1522 with PR 1898 & PR 1899go.generateTestsFlags to provide flags for the gotests tool when generating tests. PR 1841Johan Lejdung (@johan-lejdung)
go.testTags to be used for running tests. This way, you can use the existing go.buildTags for compiling and a different set of tags for running tests. Feature Request 1842 implemented with PR 1877Analysis Tools Missing button in the status bar. PR 1922iferr and forr i.e “if err ...” the “for range”. Feature Request 1920 implemented with PR 1924Go: Test File command. Bug 1911useApiV1 setting/configuration with apiVersion. Feature Request 1876gogetdoc and gopkgs if using Go modules.go.inferGopath in workspace settings when using Go modules automatically.Go: Add Import command that gives you a list of importable packages to add to the import block of current fileGo: Browse Packages command that lets you browse available packages and their filesgo.autocompleteUnimportedPackages setting is enabled.auto. In this mode, the debugging sessions will run in test mode automatically if the current active file is a test file. Otherwise this defaults to the usual debug mode. Feature Request 1780"showLog": true is added to the debug configuration. PR 1815.go.toolsEnvVars setting which gets used by all Go tools in this extension will now be passed to dlv as well during debugging sessions. With this change you dont need to repeat the variables in the debug configuration if you have already added it in the settings. Feature Request 1839go.gopath command when run programatically by other extensions now returns the GOPATH as determined by this extension. Useful for other extensions that want to provide additional features but do not want to repeat the work done by this extension to determine the GOPATH.Go: Add Package to Workspace that will add selected imported package to the current workspace. Feature Request 1733 implemented with PR 1745Marwan Sulaiman (@marwan-at-work)
Go: Generate Interface Stubs command when using on an interface that is defined inside an “internal” folder.Bug 1769go.delveConfig to configure the use of v2 apis from delve to be used when debugging tests as well normal code. Feature Request 1735 implemented with PR 1749go.alternateTools to provide alternate tools or alternate paths for the same tools used by the Go extension. Provide either absolute path or the name of the binary in GOPATH/bin, GOROOT/bin or PATH. Useful when you want to use wrapper script for the Go tools or versioned tools from https://gopkg.in. PR 1297. Some scenarios:go to goapp when using App Engine Gogometalinter to gometalinter.v2 if you want to use the stable version of the toolgocode before updating and show appropriate message when failed to do so.golangci-lint as a linter. Feature Request 1693 implemented with PR 1693Minko Gechev (@mgechev) and Mark Wolfe (@wolfeidau)
revive as a linter. Feature Request 1697 implemented with PR 1699, PR 1703 and commit d31636go.coverageDecorator. Feature Request 1302 implemented with PR 1695.Frederik Ring (@m90), Ramya Rao (@ramya-rao-a)
go.languageServerExperimentalFeatures to opt-in to try such new features from the language server that might not be feature complete yet. Feature Request 1593 implemented with PR 1607~, ${workspaceRoot}, ${workspaceFolder} in the go.testFlags setting. Feature Request 928Go: Add Import shows up the list of imports ASAP. Fixes Feature Request 1450go.formatTool, go.lintTool or go.docsTool setting to a tool that they dont have installed yet.go.toolsEnvVars setting to the process that runs the language server.go.inferGopath setting is enabled. Feature Request 1525Go to Definition feature when the entire symbol is selected with cursor at the end. Fixes Bug 891.go.installDependenciesWhenBuilding to control whether the -i flag is passed to go build/go test when compiling. Feature Request 1464go env if not set as environment variable explicitly.go.toolsEnvVars arent being used. PR 1665go.gotoSymbol.includeGoroot. If enabled, the symbols from the standard library are included when doing a workspace symbol search using the Go to Symbol in Workspace command. Feature Request 1567 and PR 1604go.coverOnSingleTest. If enabled, code coverage will be shown in the editor when running individual tests. Feature Request 1637 and PR 1638const, package, type and var. PR 1624main in a test file if the folder contains a main.go. PR 1630go.testEnvVars and go.toolsEnvVars. Bug 1608Go to Implementation and Peek Implmentation commands when using the Go Language Server. Feature Request 1611output option of delve in debug configuration.The location provided here is where delve will output the binary it then uses for debugging. PR 1564go build. PR 1573Go to Implementation to work both ways. Feature Request 1536go vet instead of go tool vet from Go 1.10 onwards as the latter now supports all vet flags. PR 1576Go: Fill Struct integrates the fillstruct tool that lets you fill struct fields with default values. PR 1506Kevin Wiesmüller @kwiesmueller
gopkgs fails to get packages that are needed to provide the completions for unimported packages. PR 1528Anatoly Milkov (@anatolym) and Christian Winther (@jippi)
Go: Build Workspace command or the setting "go.buildOnSave": "workspace" results in persistent error from trying to build the root directory with no Go files.goreturns is updated. Fixes Bug 1447~, $workspaceRoot and $workspaceFolder are now supported in the go.goroot settinggo.inferGopath will now infer the correct GOPATH even in the below 2 cases which wasnt supported beforegocode to fix issue with code completion when there are unicode characters in the file. Fixes Bug 1431Insert Snippet commandspawn instead of exec when running formatters.onDebugResolve activation event instead of onDebug to avoid activating the Go extension when other type of debug sessions are startedgoreturns: PR sqs/goreturns#42. This in turn fixes Bug 613 and Bug 630${workspaceFolder} in the below settingsgo.gopathgo.toolsGopathgo.testEnvVarsgo.testEnvFileAnalysis Tools Missing message has bee updated to only appear for the tools backing basic features of the extensiongo.formatOnSave setting in favor of editor.formatOnSave. To disable formatting on save, add the below setting:"[go]": {
"editor.formatOnSave": false
}
This fixes the below issuesNew commands
Go: Run on Go Playground to run the current file (only if all its dependencies are from the std library) in the Go Playground using goplay. PR 1270. Feature Request #1211go.playground to control whether to run and/or share a link to the playground and/or open the playground in the browser.Go: Benchmark Function At Cursor and Codelens for running benchmarks in test files. PR 1303. Feature Request #972Go: Lint Current Package and Go: Lint Workpsace to lint using the tool specified in the go.lintTool setting and the flags specified in the go.lintFlags setting. PR 1258. Feature Request #1041Go: Vet Current Package and Go: Vet Workpsace to vet using the flags specified in the go.vetFlags setting. Feature Request #1041Go: Build Current Package and Go: Build Workpsace to build using the flags specified in the go.buildFlags setting and build tags specified in the setting go.buildTags. Feature Request #287Go: Install Current Package to install the current package using the flags specified in the go.buildFlags setting and build tags specified in the setting go.buildTags. Feature Request #287Completion Improvements
gocode can now use gb specific rules when providing completions. Set the new setting go.gocodePackageLookupMode to gb to use this feature. Feature Request #547Performance improvements
autobuild feature of gocode which is known to slow completions is now disabled by default. Fixes Bug 1323-i flag when building, we do not rely on autobuild feature of gocode to ensure fresh results from dependencies.buildOnSave setting, then use the new Go: Build Current Package command once in a while to ensure the dependencies are up to date or enable the go.gocodeAutoBuild setting.go vet ./... instead of go tool vet -flags. Fixes Bug 1215Others
guru fails to provide references. Fixes Bug 1336go.buildTags setting. Fixes [Bug 1355]https://github.com/Microsoft/vscode-go/issues/1355).We now have Multi Root support for Go. PR 1221 Please note:
Go to Symbol in workspace.package snippet completion is now smarter when suggesting package names. PR 1220. It suggestsmain when current file is main.go or there exists a main.go file in current folderinternal_test.go_test when current file is a test file- or ., then what appears after the - or . is suggested.go.useCodeSnippetsOnFunctionSuggestWithoutType is introduced. This allows completions of functions with their parameter signature but without the parameter types. Feature Request 1241Log methods from the testing package$workspaceRoot will now be resolved when part of go.testEnvVars and go.toolsEnvVars setting.Go: Browse Packages command will now include newly installed/built packages without the need for reloading VS Code.Go: Get Package is introduced to run go get on the package in the import statement under the cursor. PR 1222Go To Implementation command on interfaces. Feature Request #771.Go: Browse Packages to make browsing selected package faster. PR 1136helloweb that generates a web app with an http endpoint returning a greeting and current time. PR 1113log.Println. Fixes Issue #1120 with PR 1124Go: Test Package is run. You can disable this by setting go.coverOnTestPackage to false.go.coverOnSave was disabled.launch.json file anymore. When no GOPATH is provided this way, the debug adapter will now infer the GOPATH based on the path of the file/package being debugged. This fixes Issue #840.go.buildFlags, go.buildTags and go.testFlags settings. Fixes Issue #1117gometalinter and dlv will honor the go.toolsGopath setting. Fixes Issue #1110gometalinter, while only supporting a subset of the tools. Use the setting go.lintTool to try this.go.coverageDecorator to try this.Go: Browse Packages. Feature Request 330Go: Test all Packages in Workspacego.buildOnSave is set to workspace. Bug 1060go.buildTags when using gogetdoc. Bug 1024-i is passed as a build flag. Bug 1064Go: Add Import command is used. Bug 1056Go: Generate Interface Stubs should work when interface is prefixed with package pathgo.testEnvFile to configure the location of a file that would have environment variables to use while running tests. PR 971key=value.go.test.EnvVars will override the aboveF5, the above will not be used. Continue to use the env and/or envFile property in the debug configurations in the launch.json file.go.buildOnSave, go.lintOnSave and go.vetOnSave now take values package, workspace or off instead of the previous true/false.true/false for these settings, they will work as they did before, but you will get a warning in your settings file.-i flag.gometalinter by using the --aggregate flag which aggregates similar errors from multiple linters.--- is anywhere in the fileGo: Test Function At Cursor fails.go.testEnvVars while debugging tests using codelensgo.referencesCodeLens.enabled is deprecated in favor of go.enableCodeLens to control multiple types of codelens."go.enableCodeLens": { "references": false, "runtest": true }
Find All References command. PR 933 and PR 938. You can disable this by updating the setting go.referencesCodeLens.enabled.go.coverageOptions to control whether you want to highlight only covered code or only uncovered code or both when code coverage is run. PR 945Go: Test Coverage In Current Package is renamed to Go: Toggle Test Coverage In Current Package and it does exactly what the name suggests. Toggles test coverage. Commit cc661daf--backend=lldb option in Mac by default. You can now change this default value by setting the backend property to native in the launch.json file. Commit 4beecf1. Root cause is expected to be fixed in delve itself and is being tracked in derekparker/delve/818go.toolsEnvVars where you can specify env vars to be used by the Go tools that are used in the Go extension. PR 932 and commit bca4dd5f. This fixes Bug 632 as well.gotype-live which is gotype with support for unsaved file contents. PR 903go.liveErrors controls this feature."go.liveErrors": { "enabled": true } to enable this feature"go.liveErrors": { "enabled": true, "delay": 500 } to update the delay (in milliseconds) after which gotype-live would be run post a keystrokelaunch.json file. PR 904launch.json file, GOPATH from settings wont be read. You will need to set it in the env property as before--config flag for gometalinter now supports the use of ${workspaceRoot} and ~ that allows users to provide config file path relative to workspace or home directory respectively. PR 909Go: Test All Packages in Workspace to run tests from all packages in the workspace.Fix for Bug 892 which breaks build when the user has multiple GOPATHs and the Go project being worked on is not the first one among the multiple GOPATHs. Commit d417fd6
Go: Add Tags command adds tags configured in go.addTags setting to selected struct fields. By default, json tags are added. Examples:xml tags, set go.addTags to {"tags": "xml"}xml with cdata option, set go.addTags to {"tags": "xml", "options": "xml=cdata"}json and xml tags, set go.addTags to {"tags": "json,xml"}Go: Remove Tags command removes tags configured in go.removeTags setting from selected struct fields.xml tags, set go.removeTags to {"tags": "xml"}go.addTags and/or go.removeTags to {"promptForTags": true}diff tool from Git or Cygwin are in the PATH in Windows. PR 866Ctrl+F5 or run the command Debug: Start Without Debugging to run using the currently selected launch configuration.launch.json file, then the current file will be run.type as debug and program that points to a Go file and not packageenvFile attribute in launch.json where you can provide a file with env variables to use while debugging. PR 849go.languageServerFlags that will be passed while running the Go language server. PR 882["trace"] to see the traces from the language server in the output pane under the channel “go-langserver”["trace", "logfile", "path to a text file to log the trace] to log the traces and errors from the language server to a file.Go: Install Tools command now installs delve as well in Linux and Windows, but not in Mac OSX. Commit 30ea096 Fixes Bug 874Go: Install Tools command now installs godoc. PR 854GOPATH as defined by the go env output as default. Use go binary from default platform specific locations when GOROOT is not set as env variable. Fixes Bug 873go.editorContextMenuCommands to control which commands show up in the editor context menu.go.gotoSymbol.ignoreFolders that allows to ignore folders while using the “Go to Symbol in Workspace” feature. This takes in an array of folder names (not paths). Best used to ignore vendor folders while doing a workspace symbol search. PR 795go.useLanguageServer to use the Go language server from Sourcegraph for features like Hover, Definition, Find All References, Signature Help, Go to Symbol in File and Workspace. PR 750go.inferGopath. When true GOPATH will be inferred from the path of the folder opened in VS Code. This will override the value from go.gopath setting as well as the GOPATH environment variable. PR 762F5 to start the debug session. A launch.json is still required to debug tests or for advanced debug configurations. PR 769launch.json file. PR 794go.testOnSave. When true, all tests in the current package will be run on saving a Go file. The status of the tests will be shown in the status bar at the bottom of the VS Code window. It is not advised to have this on when you have Auto Save enabled. PR 810-v to the go.testFlags to get verbose output. PR 817go.toolsGopath for providing an alternate location to install all the Go tools that the extension depends on, if you don't want them cluttering your GOPATH. PR 351 and PR 737.Go: Install Tools command to install the tools to the new location.Go: Install Tools command now support gometalinter if it is your chosen linting tool. PR 735.gometalinter internally installs linters and expects them to be in the user's GOPATH, gometalinter will get installed to your GOPATH and not the alternate location specified in go.toolsGopath-i flag (for non main packages) which installs dependent packages, which in turn get used in subsequent builds resulting in faster builds in bigger workspaces. PR 718A new setting go.testFlags that can be used to run tests. If null, go.buildFlags will be used. PR 482
Customize flags for each of the test command by using different keybindings. PR 482. In the below example, ctrl+shift+t is bound to run the tests in current file with -short flag. The commands here can be go.test.package, go.test.file or go.test.cursor.
{ "key": "ctrl+shift+t", "command": "go.test.file", "args": { "flags": ["-short"] }, "when": "editorTextFocus" }
New toggle command Go: Toggle Test File that lets you toggle between your Go file and the corresponding test file. Previous commands Go: Open Test File and Go: Open Implementation For Test File have been deprecated in favor of this new command. PR 739. You can add a keyboard binding to this as below:
{ "key": "ctrl+shift+t", "command": "go.toggle.test.file", "when": "editorTextFocus && editorLangId == 'go'" }
If current file is not a test file, show error message while running test commands, instead of displaying success message. Fixes #303
cwd launch configuration argument. PR 714env property in launch.json will also be used to find dlv tool. PR 725.trace in launch.json to provide option to have verbose logging while debugging using vscode-debug-logger. PR 753. This will help in diagnosing issues with debugging in the Go extension.http.proxy setting while installing Go tools. PR 639godoc, godef, gogetdoc. PR 711go.autocompleteUnimportedPackages is now false to reduce noise in the suggestion list. Members of unimported packages will still show up in suggestion list after typing dot after package name.gogetdoc for Goto Definition , Hover and Signature Help features. PR 622 To use this, add a setting "go.docstool": "gogetdoc" to your settings and reload/restart VS Code. This fixes the below bugsnet packagego.formatOnSave due to popular demand.editor.formatOnSave and deprecating go.formatOnSave PR 578Go: Open Test FileGo: Open Implementation for Test FileGo: Generate unit tests ... commands. PR 610go.formatFlags to pass flags to the formatting tool PR #461gotests tool. Needs Go 1.6 or higher. PR #489Go: Generate unit tests for current fileGo: Generate unit tests for current functionGo: Generate unit tests for current packagego.testEnVars to pass environment variables to Go tests PR #498diff tool which is not available on Windows by default. You can install it from DiffUtils for Windowsgo.autocompleteUnimportedPackages to true. PR #497Go: Add Import command. PR #508gometalinter to Go 1.5 users since golint dropped support for Go 1.5 PR #509goimports. PR #470 and PR #509goreturns in Windows. PR #463Go: Install Tools PR #428showLog:true. PR #412godoc now appears on hover PR #424gometalinter as tool for linting PR #294showLog to toggle the debugging output from delve PR #352