Analyzers

This document describes the analyzers that gopls uses inside the editor.

Details about how to enable/disable these analyses can be found here.

asmdecl

report mismatches between assembly files and Go declarations

Enabled by default.

assign

check for useless assignments

This checker reports assignments of the form x = x or a[i] = a[i]. These are almost always useless, and even when they aren't they are usually a mistake.

Enabled by default.

atomic

check for common mistakes using the sync/atomic package

The atomic checker looks for assignment statements of the form:

x = atomic.AddUint64(&x, 1)

which are not atomic.

Enabled by default.

atomicalign

check for non-64-bits-aligned arguments to sync/atomic functions

Enabled by default.

bools

check for common mistakes involving boolean operators

Enabled by default.

buildtag

check //go:build and // +build directives

Enabled by default.

cgocall

detect some violations of the cgo pointer passing rules

Check for invalid cgo pointer passing. This looks for code that uses cgo to call C code passing values whose types are almost always invalid according to the cgo pointer sharing rules. Specifically, it warns about attempts to pass a Go chan, map, func, or slice to C, either directly, or via a pointer, array, or struct.

Enabled by default.

composites

check for unkeyed composite literals

This analyzer reports a diagnostic for composite literals of struct types imported from another package that do not use the field-keyed syntax. Such literals are fragile because the addition of a new field (even if unexported) to the struct will cause compilation to fail.

As an example,

err = &net.DNSConfigError{err}

should be replaced by:

err = &net.DNSConfigError{Err: err}

Enabled by default.

copylocks

check for locks erroneously passed by value

Inadvertently copying a value containing a lock, such as sync.Mutex or sync.WaitGroup, may cause both copies to malfunction. Generally such values should be referred to through a pointer.

Enabled by default.

deepequalerrors

check for calls of reflect.DeepEqual on error values

The deepequalerrors checker looks for calls of the form:

reflect.DeepEqual(err1, err2)

where err1 and err2 are errors. Using reflect.DeepEqual to compare errors is discouraged.

Enabled by default.

directive

check Go toolchain directives such as //go:debug

This analyzer checks for problems with known Go toolchain directives in all Go source files in a package directory, even those excluded by //go:build constraints, and all non-Go source files too.

For //go:debug (see https://go.dev/doc/godebug), the analyzer checks that the directives are placed only in Go source files, only above the package comment, and only in package main or *_test.go files.

Support for other known directives may be added in the future.

This analyzer does not check //go:build, which is handled by the buildtag analyzer.

Enabled by default.

embed

check for //go:embed directive import

This analyzer checks that the embed package is imported when source code contains //go:embed comment directives. The embed package must be imported for //go:embed directives to function.import _ “embed”.

Enabled by default.

errorsas

report passing non-pointer or non-error values to errors.As

The errorsas analysis reports calls to errors.As where the type of the second argument is not a pointer to a type implementing error.

Enabled by default.

fieldalignment

find structs that would use less memory if their fields were sorted

This analyzer find structs that can be rearranged to use less memory, and provides a suggested edit with the most compact order.

Note that there are two different diagnostics reported. One checks struct size, and the other reports “pointer bytes” used. Pointer bytes is how many bytes of the object that the garbage collector has to potentially scan for pointers, for example:

struct { uint32; string }

have 16 pointer bytes because the garbage collector has to scan up through the string's inner pointer.

struct { string; *uint32 }

has 24 pointer bytes because it has to scan further through the *uint32.

struct { string; uint32 }

has 8 because it can stop immediately after the string pointer.

Be aware that the most compact order is not always the most efficient. In rare cases it may cause two variables each updated by its own goroutine to occupy the same CPU cache line, inducing a form of memory contention known as “false sharing” that slows down both goroutines.

Disabled by default. Enable it by setting "analyses": {"fieldalignment": true}.

httpresponse

check for mistakes using HTTP responses

A common mistake when using the net/http package is to defer a function call to close the http.Response Body before checking the error that determines whether the response is valid:

resp, err := http.Head(url)
defer resp.Body.Close()
if err != nil {
	log.Fatal(err)
}
// (defer statement belongs here)

This checker helps uncover latent nil dereference bugs by reporting a diagnostic for such mistakes.

Enabled by default.

ifaceassert

detect impossible interface-to-interface type assertions

This checker flags type assertions v.(T) and corresponding type-switch cases in which the static type V of v is an interface that cannot possibly implement the target interface T. This occurs when V and T contain methods with the same name but different signatures. Example:

var v interface {
	Read()
}
_ = v.(io.Reader)

The Read method in v has a different signature than the Read method in io.Reader, so this assertion cannot succeed.

Enabled by default.

loopclosure

check references to loop variables from within nested functions

This analyzer reports places where a function literal references the iteration variable of an enclosing loop, and the loop calls the function in such a way (e.g. with go or defer) that it may outlive the loop iteration and possibly observe the wrong value of the variable.

In this example, all the deferred functions run after the loop has completed, so all observe the final value of v.

for _, v := range list {
    defer func() {
        use(v) // incorrect
    }()
}

One fix is to create a new variable for each iteration of the loop:

for _, v := range list {
    v := v // new var per iteration
    defer func() {
        use(v) // ok
    }()
}

The next example uses a go statement and has a similar problem. In addition, it has a data race because the loop updates v concurrent with the goroutines accessing it.

for _, v := range elem {
    go func() {
        use(v)  // incorrect, and a data race
    }()
}

A fix is the same as before. The checker also reports problems in goroutines started by golang.org/x/sync/errgroup.Group. A hard-to-spot variant of this form is common in parallel tests:

func Test(t *testing.T) {
    for _, test := range tests {
        t.Run(test.name, func(t *testing.T) {
            t.Parallel()
            use(test) // incorrect, and a data race
        })
    }
}

The t.Parallel() call causes the rest of the function to execute concurrent with the loop.

The analyzer reports references only in the last statement, as it is not deep enough to understand the effects of subsequent statements that might render the reference benign. (“Last statement” is defined recursively in compound statements such as if, switch, and select.)

See: https://golang.org/doc/go_faq.html#closures_and_goroutines

Enabled by default.

lostcancel

check cancel func returned by context.WithCancel is called

The cancellation function returned by context.WithCancel, WithTimeout, and WithDeadline must be called or the new context will remain live until its parent context is cancelled. (The background context is never cancelled.)

Enabled by default.

nilfunc

check for useless comparisons between functions and nil

A useless comparison is one like f == nil as opposed to f() == nil.

Enabled by default.

nilness

check for redundant or impossible nil comparisons

The nilness checker inspects the control-flow graph of each function in a package and reports nil pointer dereferences, degenerate nil pointers, and panics with nil values. A degenerate comparison is of the form x==nil or x!=nil where x is statically known to be nil or non-nil. These are often a mistake, especially in control flow related to errors. Panics with nil values are checked because they are not detectable by

if r := recover(); r != nil {

This check reports conditions such as:

if f == nil { // impossible condition (f is a function)
}

and:

p := &v
...
if p != nil { // tautological condition
}

and:

if p == nil {
	print(*p) // nil dereference
}

and:

if p == nil {
	panic(p)
}

Disabled by default. Enable it by setting "analyses": {"nilness": true}.

printf

check consistency of Printf format strings and arguments

The check applies to calls of the formatting functions such as [fmt.Printf] and [fmt.Sprintf], as well as any detected wrappers of those functions.

In this example, the %d format operator requires an integer operand:

fmt.Printf("%d", "hello") // fmt.Printf format %d has arg "hello" of wrong type string

See the documentation of the fmt package for the complete set of format operators and their operand types.

To enable printf checking on a function that is not found by this analyzer's heuristics (for example, because control is obscured by dynamic method calls), insert a bogus call:

func MyPrintf(format string, args ...any) {
	if false {
		_ = fmt.Sprintf(format, args...) // enable printf checker
	}
	...
}

The -funcs flag specifies a comma-separated list of names of additional known formatting functions or methods. If the name contains a period, it must denote a specific function using one of the following forms:

dir/pkg.Function
dir/pkg.Type.Method
(*dir/pkg.Type).Method

Otherwise the name is interpreted as a case-insensitive unqualified identifier such as “errorf”. Either way, if a listed name ends in f, the function is assumed to be Printf-like, taking a format string before the argument list. Otherwise it is assumed to be Print-like, taking a list of arguments with no format string.

Enabled by default.

shadow

check for possible unintended shadowing of variables

This analyzer check for shadowed variables. A shadowed variable is a variable declared in an inner scope with the same name and type as a variable in an outer scope, and where the outer variable is mentioned after the inner one is declared.

(This definition can be refined; the module generates too many false positives and is not yet enabled by default.)

For example:

func BadRead(f *os.File, buf []byte) error {
	var err error
	for {
		n, err := f.Read(buf) // shadows the function variable 'err'
		if err != nil {
			break // causes return of wrong value
		}
		foo(buf)
	}
	return err
}

Disabled by default. Enable it by setting "analyses": {"shadow": true}.

shift

check for shifts that equal or exceed the width of the integer

Enabled by default.

simplifycompositelit

check for composite literal simplifications

An array, slice, or map composite literal of the form: []T{T{}, T{}} will be simplified to: []T{{}, {}}

This is one of the simplifications that “gofmt -s” applies.

Enabled by default.

simplifyrange

check for range statement simplifications

A range of the form: for x, _ = range v {...} will be simplified to: for x = range v {...}

A range of the form: for _ = range v {...} will be simplified to: for range v {...}

This is one of the simplifications that “gofmt -s” applies.

Enabled by default.

simplifyslice

check for slice simplifications

A slice expression of the form: s[a:len(s)] will be simplified to: s[a:]

This is one of the simplifications that “gofmt -s” applies.

Enabled by default.

sortslice

check the argument type of sort.Slice

sort.Slice requires an argument of a slice type. Check that the interface{} value passed to sort.Slice is actually a slice.

Enabled by default.

stdmethods

check signature of methods of well-known interfaces

Sometimes a type may be intended to satisfy an interface but may fail to do so because of a mistake in its method signature. For example, the result of this WriteTo method should be (int64, error), not error, to satisfy io.WriterTo:

type myWriterTo struct{...}
func (myWriterTo) WriteTo(w io.Writer) error { ... }

This check ensures that each method whose name matches one of several well-known interface methods from the standard library has the correct signature for that interface.

Checked method names include:

Format GobEncode GobDecode MarshalJSON MarshalXML
Peek ReadByte ReadFrom ReadRune Scan Seek
UnmarshalJSON UnreadByte UnreadRune WriteByte
WriteTo

Enabled by default.

stringintconv

check for string(int) conversions

This checker flags conversions of the form string(x) where x is an integer (but not byte or rune) type. Such conversions are discouraged because they return the UTF-8 representation of the Unicode code point x, and not a decimal string representation of x as one might expect. Furthermore, if x denotes an invalid code point, the conversion cannot be statically rejected.

For conversions that intend on using the code point, consider replacing them with string(rune(x)). Otherwise, strconv.Itoa and its equivalents return the string representation of the value in the desired base.

Enabled by default.

structtag

check that struct field tags conform to reflect.StructTag.Get

Also report certain struct tags (json, xml) used with unexported fields.

Enabled by default.

testinggoroutine

report calls to (*testing.T).Fatal from goroutines started by a test.

Functions that abruptly terminate a test, such as the Fatal, Fatalf, FailNow, and Skip{,f,Now} methods of *testing.T, must be called from the test goroutine itself. This checker detects calls to these functions that occur within a goroutine started by the test. For example:

func TestFoo(t *testing.T) {
    go func() {
        t.Fatal("oops") // error: (*T).Fatal called from non-test goroutine
    }()
}

Enabled by default.

tests

check for common mistaken usages of tests and examples

The tests checker walks Test, Benchmark, Fuzzing and Example functions checking malformed names, wrong signatures and examples documenting non-existent identifiers.

Please see the documentation for package testing in golang.org/pkg/testing for the conventions that are enforced for Tests, Benchmarks, and Examples.

Enabled by default.

timeformat

check for calls of (time.Time).Format or time.Parse with 2006-02-01

The timeformat checker looks for time formats with the 2006-02-01 (yyyy-dd-mm) format. Internationally, “yyyy-dd-mm” does not occur in common calendar date standards, and so it is more likely that 2006-01-02 (yyyy-mm-dd) was intended.

Enabled by default.

unmarshal

report passing non-pointer or non-interface values to unmarshal

The unmarshal analysis reports calls to functions such as json.Unmarshal in which the argument type is not a pointer or an interface.

Enabled by default.

unreachable

check for unreachable code

The unreachable analyzer finds statements that execution can never reach because they are preceded by an return statement, a call to panic, an infinite loop, or similar constructs.

Enabled by default.

unsafeptr

check for invalid conversions of uintptr to unsafe.Pointer

The unsafeptr analyzer reports likely incorrect uses of unsafe.Pointer to convert integers to pointers. A conversion from uintptr to unsafe.Pointer is invalid if it implies that there is a uintptr-typed word in memory that holds a pointer value, because that word will be invisible to stack copying and to the garbage collector.

Enabled by default.

unusedparams

check for unused parameters of functions

The unusedparams analyzer checks functions to see if there are any parameters that are not being used.

To reduce false positives it ignores:

  • methods
  • parameters that do not have a name or are underscored
  • functions in test files
  • functions with empty bodies or those with just a return stmt

Disabled by default. Enable it by setting "analyses": {"unusedparams": true}.

unusedresult

check for unused results of calls to some functions

Some functions like fmt.Errorf return a result and have no side effects, so it is always a mistake to discard the result. Other functions may return an error that must not be ignored, or a cleanup operation that must be called. This analyzer reports calls to functions like these when the result of the call is ignored.

The set of functions may be controlled using flags.

Enabled by default.

unusedwrite

checks for unused writes

The analyzer reports instances of writes to struct fields and arrays that are never read. Specifically, when a struct object or an array is copied, its elements are copied implicitly by the compiler, and any element write to this copy does nothing with the original object.

For example:

type T struct { x int }

func f(input []T) {
	for i, v := range input {  // v is a copy
		v.x = i  // unused write to field x
	}
}

Another example is about non-pointer receiver:

type T struct { x int }

func (t T) f() {  // t is a copy
	t.x = i  // unused write to field x
}

Disabled by default. Enable it by setting "analyses": {"unusedwrite": true}.

useany

check for constraints that could be simplified to “any”

Disabled by default. Enable it by setting "analyses": {"useany": true}.

fillreturns

suggest fixes for errors due to an incorrect number of return values

This checker provides suggested fixes for type errors of the type “wrong number of return values (want %d, got %d)”. For example: func m() (int, string, *bool, error) { return } will turn into func m() (int, string, *bool, error) { return 0, "", nil, nil }

This functionality is similar to https://github.com/sqs/goreturns.

Enabled by default.

nonewvars

suggested fixes for “no new vars on left side of :=”

This checker provides suggested fixes for type errors of the type “no new vars on left side of :=”. For example: z := 1 z := 2 will turn into z := 1 z = 2

Enabled by default.

noresultvalues

suggested fixes for unexpected return values

This checker provides suggested fixes for type errors of the type “no result values expected” or “too many return values”. For example: func z() { return nil } will turn into func z() { return }

Enabled by default.

undeclaredname

suggested fixes for “undeclared name: <>”

This checker provides suggested fixes for type errors of the type “undeclared name: <>”. It will either insert a new statement, such as:

"<> := "

or a new function declaration, such as:

func <>(inferred parameters) { panic(“implement me!”) }

Enabled by default.

unusedvariable

check for unused variables

The unusedvariable analyzer suggests fixes for unused variables errors.

Disabled by default. Enable it by setting "analyses": {"unusedvariable": true}.

fillstruct

note incomplete struct initializations

This analyzer provides diagnostics for any struct literals that do not have any fields initialized. Because the suggested fix for this analysis is expensive to compute, callers should compute it separately, using the SuggestedFix function below.

Enabled by default.

infertypeargs

check for unnecessary type arguments in call expressions

Explicit type arguments may be omitted from call expressions if they can be inferred from function arguments, or from other type arguments:

func f[T any](T) {}

func _() {
	f[string]("foo") // string could be inferred
}

Enabled by default.

stubmethods

stub methods analyzer

This analyzer generates method stubs for concrete types in order to implement a target interface

Enabled by default.