blob: dc52372e48aea130a3d3c33082fc35cb93976d27 [file] [log] [blame]
// Copyright 2013 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Hacked up copy of go/ast/import.go
package imports
import (
"go/ast"
"go/token"
"log"
"sort"
"strconv"
)
// sortImports sorts runs of consecutive import lines in import blocks in f.
// It also removes duplicate imports when it is possible to do so without data loss.
func sortImports(localPrefix string, fset *token.FileSet, f *ast.File) {
for i, d := range f.Decls {
d, ok := d.(*ast.GenDecl)
if !ok || d.Tok != token.IMPORT {
// Not an import declaration, so we're done.
// Imports are always first.
break
}
if len(d.Specs) == 0 {
// Empty import block, remove it.
f.Decls = append(f.Decls[:i], f.Decls[i+1:]...)
}
if !d.Lparen.IsValid() {
// Not a block: sorted by default.
continue
}
// Identify and sort runs of specs on successive lines.
i := 0
specs := d.Specs[:0]
for j, s := range d.Specs {
if j > i && fset.Position(s.Pos()).Line > 1+fset.Position(d.Specs[j-1].End()).Line {
// j begins a new run. End this one.
specs = append(specs, sortSpecs(localPrefix, fset, f, d.Specs[i:j])...)
i = j
}
}
specs = append(specs, sortSpecs(localPrefix, fset, f, d.Specs[i:])...)
d.Specs = specs
// Deduping can leave a blank line before the rparen; clean that up.
if len(d.Specs) > 0 {
lastSpec := d.Specs[len(d.Specs)-1]
lastLine := fset.Position(lastSpec.Pos()).Line
if rParenLine := fset.Position(d.Rparen).Line; rParenLine > lastLine+1 {
fset.File(d.Rparen).MergeLine(rParenLine - 1)
}
}
}
}
// mergeImports merges all the import declarations into the first one.
// Taken from golang.org/x/tools/ast/astutil.
// This does not adjust line numbers properly
func mergeImports(fset *token.FileSet, f *ast.File) {
if len(f.Decls) <= 1 {
return
}
// Merge all the import declarations into the first one.
var first *ast.GenDecl
for i := 0; i < len(f.Decls); i++ {
decl := f.Decls[i]
gen, ok := decl.(*ast.GenDecl)
if !ok || gen.Tok != token.IMPORT || declImports(gen, "C") {
continue
}
if first == nil {
first = gen
continue // Don't touch the first one.
}
// We now know there is more than one package in this import
// declaration. Ensure that it ends up parenthesized.
first.Lparen = first.Pos()
// Move the imports of the other import declaration to the first one.
for _, spec := range gen.Specs {
spec.(*ast.ImportSpec).Path.ValuePos = first.Pos()
first.Specs = append(first.Specs, spec)
}
f.Decls = append(f.Decls[:i], f.Decls[i+1:]...)
i--
}
}
// declImports reports whether gen contains an import of path.
// Taken from golang.org/x/tools/ast/astutil.
func declImports(gen *ast.GenDecl, path string) bool {
if gen.Tok != token.IMPORT {
return false
}
for _, spec := range gen.Specs {
impspec := spec.(*ast.ImportSpec)
if importPath(impspec) == path {
return true
}
}
return false
}
func importPath(s ast.Spec) string {
t, err := strconv.Unquote(s.(*ast.ImportSpec).Path.Value)
if err == nil {
return t
}
return ""
}
func importName(s ast.Spec) string {
n := s.(*ast.ImportSpec).Name
if n == nil {
return ""
}
return n.Name
}
func importComment(s ast.Spec) string {
c := s.(*ast.ImportSpec).Comment
if c == nil {
return ""
}
return c.Text()
}
// collapse indicates whether prev may be removed, leaving only next.
func collapse(prev, next ast.Spec) bool {
if importPath(next) != importPath(prev) || importName(next) != importName(prev) {
return false
}
return prev.(*ast.ImportSpec).Comment == nil
}
type posSpan struct {
Start token.Pos
End token.Pos
}
func sortSpecs(localPrefix string, fset *token.FileSet, f *ast.File, specs []ast.Spec) []ast.Spec {
// Can't short-circuit here even if specs are already sorted,
// since they might yet need deduplication.
// A lone import, however, may be safely ignored.
if len(specs) <= 1 {
return specs
}
// Record positions for specs.
pos := make([]posSpan, len(specs))
for i, s := range specs {
pos[i] = posSpan{s.Pos(), s.End()}
}
// Identify comments in this range.
// Any comment from pos[0].Start to the final line counts.
lastLine := fset.Position(pos[len(pos)-1].End).Line
cstart := len(f.Comments)
cend := len(f.Comments)
for i, g := range f.Comments {
if g.Pos() < pos[0].Start {
continue
}
if i < cstart {
cstart = i
}
if fset.Position(g.End()).Line > lastLine {
cend = i
break
}
}
comments := f.Comments[cstart:cend]
// Assign each comment to the import spec preceding it.
importComment := map[*ast.ImportSpec][]*ast.CommentGroup{}
specIndex := 0
for _, g := range comments {
for specIndex+1 < len(specs) && pos[specIndex+1].Start <= g.Pos() {
specIndex++
}
s := specs[specIndex].(*ast.ImportSpec)
importComment[s] = append(importComment[s], g)
}
// Sort the import specs by import path.
// Remove duplicates, when possible without data loss.
// Reassign the import paths to have the same position sequence.
// Reassign each comment to abut the end of its spec.
// Sort the comments by new position.
sort.Sort(byImportSpec{localPrefix, specs})
// Dedup. Thanks to our sorting, we can just consider
// adjacent pairs of imports.
deduped := specs[:0]
for i, s := range specs {
if i == len(specs)-1 || !collapse(s, specs[i+1]) {
deduped = append(deduped, s)
} else {
p := s.Pos()
fset.File(p).MergeLine(fset.Position(p).Line)
}
}
specs = deduped
// Fix up comment positions
for i, s := range specs {
s := s.(*ast.ImportSpec)
if s.Name != nil {
s.Name.NamePos = pos[i].Start
}
s.Path.ValuePos = pos[i].Start
s.EndPos = pos[i].End
nextSpecPos := pos[i].End
for _, g := range importComment[s] {
for _, c := range g.List {
c.Slash = pos[i].End
nextSpecPos = c.End()
}
}
if i < len(specs)-1 {
pos[i+1].Start = nextSpecPos
pos[i+1].End = nextSpecPos
}
}
sort.Sort(byCommentPos(comments))
// Fixup comments can insert blank lines, because import specs are on different lines.
// We remove those blank lines here by merging import spec to the first import spec line.
firstSpecLine := fset.Position(specs[0].Pos()).Line
for _, s := range specs[1:] {
p := s.Pos()
line := fset.File(p).Line(p)
for previousLine := line - 1; previousLine >= firstSpecLine; {
// MergeLine can panic. Avoid the panic at the cost of not removing the blank line
// golang/go#50329
if previousLine > 0 && previousLine < fset.File(p).LineCount() {
fset.File(p).MergeLine(previousLine)
previousLine--
} else {
// try to gather some data to diagnose how this could happen
req := "Please report what the imports section of your go file looked like."
log.Printf("panic avoided: first:%d line:%d previous:%d max:%d. %s",
firstSpecLine, line, previousLine, fset.File(p).LineCount(), req)
}
}
}
return specs
}
type byImportSpec struct {
localPrefix string
specs []ast.Spec // slice of *ast.ImportSpec
}
func (x byImportSpec) Len() int { return len(x.specs) }
func (x byImportSpec) Swap(i, j int) { x.specs[i], x.specs[j] = x.specs[j], x.specs[i] }
func (x byImportSpec) Less(i, j int) bool {
ipath := importPath(x.specs[i])
jpath := importPath(x.specs[j])
igroup := importGroup(x.localPrefix, ipath)
jgroup := importGroup(x.localPrefix, jpath)
if igroup != jgroup {
return igroup < jgroup
}
if ipath != jpath {
return ipath < jpath
}
iname := importName(x.specs[i])
jname := importName(x.specs[j])
if iname != jname {
return iname < jname
}
return importComment(x.specs[i]) < importComment(x.specs[j])
}
type byCommentPos []*ast.CommentGroup
func (x byCommentPos) Len() int { return len(x) }
func (x byCommentPos) Swap(i, j int) { x[i], x[j] = x[j], x[i] }
func (x byCommentPos) Less(i, j int) bool { return x[i].Pos() < x[j].Pos() }