blob: fa2834e2ab85ff094afcea58462e9022b337ac3f [file] [log] [blame]
// Copyright 2020 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package typesinternal
//go:generate stringer -type=ErrorCode
type ErrorCode int
// This file defines the error codes that can be produced during type-checking.
// Collectively, these codes provide an identifier that may be used to
// implement special handling for certain types of errors.
//
// Error codes should be fine-grained enough that the exact nature of the error
// can be easily determined, but coarse enough that they are not an
// implementation detail of the type checking algorithm. As a rule-of-thumb,
// errors should be considered equivalent if there is a theoretical refactoring
// of the type checker in which they are emitted in exactly one place. For
// example, the type checker emits different error messages for "too many
// arguments" and "too few arguments", but one can imagine an alternative type
// checker where this check instead just emits a single "wrong number of
// arguments", so these errors should have the same code.
//
// Error code names should be as brief as possible while retaining accuracy and
// distinctiveness. In most cases names should start with an adjective
// describing the nature of the error (e.g. "invalid", "unused", "misplaced"),
// and end with a noun identifying the relevant language object. For example,
// "DuplicateDecl" or "InvalidSliceExpr". For brevity, naming follows the
// convention that "bad" implies a problem with syntax, and "invalid" implies a
// problem with types.
const (
_ ErrorCode = iota
// Test is reserved for errors that only apply while in self-test mode.
Test
/* package names */
// BlankPkgName occurs when a package name is the blank identifier "_".
//
// Per the spec:
// "The PackageName must not be the blank identifier."
BlankPkgName
// MismatchedPkgName occurs when a file's package name doesn't match the
// package name already established by other files.
MismatchedPkgName
// InvalidPkgUse occurs when a package identifier is used outside of a
// selector expression.
//
// Example:
// import "fmt"
//
// var _ = fmt
InvalidPkgUse
/* imports */
// BadImportPath occurs when an import path is not valid.
BadImportPath
// BrokenImport occurs when importing a package fails.
//
// Example:
// import "amissingpackage"
BrokenImport
// ImportCRenamed occurs when the special import "C" is renamed. "C" is a
// pseudo-package, and must not be renamed.
//
// Example:
// import _ "C"
ImportCRenamed
// UnusedImport occurs when an import is unused.
//
// Example:
// import "fmt"
//
// func main() {}
UnusedImport
/* initialization */
// InvalidInitCycle occurs when an invalid cycle is detected within the
// initialization graph.
//
// Example:
// var x int = f()
//
// func f() int { return x }
InvalidInitCycle
/* decls */
// DuplicateDecl occurs when an identifier is declared multiple times.
//
// Example:
// var x = 1
// var x = 2
DuplicateDecl
// InvalidDeclCycle occurs when a declaration cycle is not valid.
//
// Example:
// import "unsafe"
//
// type T struct {
// a [n]int
// }
//
// var n = unsafe.Sizeof(T{})
InvalidDeclCycle
// InvalidTypeCycle occurs when a cycle in type definitions results in a
// type that is not well-defined.
//
// Example:
// import "unsafe"
//
// type T [unsafe.Sizeof(T{})]int
InvalidTypeCycle
/* decls > const */
// InvalidConstInit occurs when a const declaration has a non-constant
// initializer.
//
// Example:
// var x int
// const _ = x
InvalidConstInit
// InvalidConstVal occurs when a const value cannot be converted to its
// target type.
//
// TODO(findleyr): this error code and example are not very clear. Consider
// removing it.
//
// Example:
// const _ = 1 << "hello"
InvalidConstVal
// InvalidConstType occurs when the underlying type in a const declaration
// is not a valid constant type.
//
// Example:
// const c *int = 4
InvalidConstType
/* decls > var (+ other variable assignment codes) */
// UntypedNil occurs when the predeclared (untyped) value nil is used to
// initialize a variable declared without an explicit type.
//
// Example:
// var x = nil
UntypedNil
// WrongAssignCount occurs when the number of values on the right-hand side
// of an assignment or or initialization expression does not match the number
// of variables on the left-hand side.
//
// Example:
// var x = 1, 2
WrongAssignCount
// UnassignableOperand occurs when the left-hand side of an assignment is
// not assignable.
//
// Example:
// func f() {
// const c = 1
// c = 2
// }
UnassignableOperand
// NoNewVar occurs when a short variable declaration (':=') does not declare
// new variables.
//
// Example:
// func f() {
// x := 1
// x := 2
// }
NoNewVar
// MultiValAssignOp occurs when an assignment operation (+=, *=, etc) does
// not have single-valued left-hand or right-hand side.
//
// Per the spec:
// "In assignment operations, both the left- and right-hand expression lists
// must contain exactly one single-valued expression"
//
// Example:
// func f() int {
// x, y := 1, 2
// x, y += 1
// return x + y
// }
MultiValAssignOp
// InvalidIfaceAssign occurs when a value of type T is used as an
// interface, but T does not implement a method of the expected interface.
//
// Example:
// type I interface {
// f()
// }
//
// type T int
//
// var x I = T(1)
InvalidIfaceAssign
// InvalidChanAssign occurs when a chan assignment is invalid.
//
// Per the spec, a value x is assignable to a channel type T if:
// "x is a bidirectional channel value, T is a channel type, x's type V and
// T have identical element types, and at least one of V or T is not a
// defined type."
//
// Example:
// type T1 chan int
// type T2 chan int
//
// var x T1
// // Invalid assignment because both types are named
// var _ T2 = x
InvalidChanAssign
// IncompatibleAssign occurs when the type of the right-hand side expression
// in an assignment cannot be assigned to the type of the variable being
// assigned.
//
// Example:
// var x []int
// var _ int = x
IncompatibleAssign
// UnaddressableFieldAssign occurs when trying to assign to a struct field
// in a map value.
//
// Example:
// func f() {
// m := make(map[string]struct{i int})
// m["foo"].i = 42
// }
UnaddressableFieldAssign
/* decls > type (+ other type expression codes) */
// NotAType occurs when the identifier used as the underlying type in a type
// declaration or the right-hand side of a type alias does not denote a type.
//
// Example:
// var S = 2
//
// type T S
NotAType
// InvalidArrayLen occurs when an array length is not a constant value.
//
// Example:
// var n = 3
// var _ = [n]int{}
InvalidArrayLen
// BlankIfaceMethod occurs when a method name is '_'.
//
// Per the spec:
// "The name of each explicitly specified method must be unique and not
// blank."
//
// Example:
// type T interface {
// _(int)
// }
BlankIfaceMethod
// IncomparableMapKey occurs when a map key type does not support the == and
// != operators.
//
// Per the spec:
// "The comparison operators == and != must be fully defined for operands of
// the key type; thus the key type must not be a function, map, or slice."
//
// Example:
// var x map[T]int
//
// type T []int
IncomparableMapKey
// InvalidIfaceEmbed occurs when a non-interface type is embedded in an
// interface.
//
// Example:
// type T struct {}
//
// func (T) m()
//
// type I interface {
// T
// }
InvalidIfaceEmbed
// InvalidPtrEmbed occurs when an embedded field is of the pointer form *T,
// and T itself is itself a pointer, an unsafe.Pointer, or an interface.
//
// Per the spec:
// "An embedded field must be specified as a type name T or as a pointer to
// a non-interface type name *T, and T itself may not be a pointer type."
//
// Example:
// type T *int
//
// type S struct {
// *T
// }
InvalidPtrEmbed
/* decls > func and method */
// BadRecv occurs when a method declaration does not have exactly one
// receiver parameter.
//
// Example:
// func () _() {}
BadRecv
// InvalidRecv occurs when a receiver type expression is not of the form T
// or *T, or T is a pointer type.
//
// Example:
// type T struct {}
//
// func (**T) m() {}
InvalidRecv
// DuplicateFieldAndMethod occurs when an identifier appears as both a field
// and method name.
//
// Example:
// type T struct {
// m int
// }
//
// func (T) m() {}
DuplicateFieldAndMethod
// DuplicateMethod occurs when two methods on the same receiver type have
// the same name.
//
// Example:
// type T struct {}
// func (T) m() {}
// func (T) m(i int) int { return i }
DuplicateMethod
/* decls > special */
// InvalidBlank occurs when a blank identifier is used as a value or type.
//
// Per the spec:
// "The blank identifier may appear as an operand only on the left-hand side
// of an assignment."
//
// Example:
// var x = _
InvalidBlank
// InvalidIota occurs when the predeclared identifier iota is used outside
// of a constant declaration.
//
// Example:
// var x = iota
InvalidIota
// MissingInitBody occurs when an init function is missing its body.
//
// Example:
// func init()
MissingInitBody
// InvalidInitSig occurs when an init function declares parameters or
// results.
//
// Example:
// func init() int { return 1 }
InvalidInitSig
// InvalidInitDecl occurs when init is declared as anything other than a
// function.
//
// Example:
// var init = 1
InvalidInitDecl
// InvalidMainDecl occurs when main is declared as anything other than a
// function, in a main package.
InvalidMainDecl
/* exprs */
// TooManyValues occurs when a function returns too many values for the
// expression context in which it is used.
//
// Example:
// func ReturnTwo() (int, int) {
// return 1, 2
// }
//
// var x = ReturnTwo()
TooManyValues
// NotAnExpr occurs when a type expression is used where a value expression
// is expected.
//
// Example:
// type T struct {}
//
// func f() {
// T
// }
NotAnExpr
/* exprs > const */
// TruncatedFloat occurs when a float constant is truncated to an integer
// value.
//
// Example:
// var _ int = 98.6
TruncatedFloat
// NumericOverflow occurs when a numeric constant overflows its target type.
//
// Example:
// var x int8 = 1000
NumericOverflow
/* exprs > operation */
// UndefinedOp occurs when an operator is not defined for the type(s) used
// in an operation.
//
// Example:
// var c = "a" - "b"
UndefinedOp
// MismatchedTypes occurs when operand types are incompatible in a binary
// operation.
//
// Example:
// var a = "hello"
// var b = 1
// var c = a - b
MismatchedTypes
// DivByZero occurs when a division operation is provable at compile
// time to be a division by zero.
//
// Example:
// const divisor = 0
// var x int = 1/divisor
DivByZero
// NonNumericIncDec occurs when an increment or decrement operator is
// applied to a non-numeric value.
//
// Example:
// func f() {
// var c = "c"
// c++
// }
NonNumericIncDec
/* exprs > ptr */
// UnaddressableOperand occurs when the & operator is applied to an
// unaddressable expression.
//
// Example:
// var x = &1
UnaddressableOperand
// InvalidIndirection occurs when a non-pointer value is indirected via the
// '*' operator.
//
// Example:
// var x int
// var y = *x
InvalidIndirection
/* exprs > [] */
// NonIndexableOperand occurs when an index operation is applied to a value
// that cannot be indexed.
//
// Example:
// var x = 1
// var y = x[1]
NonIndexableOperand
// InvalidIndex occurs when an index argument is not of integer type,
// negative, or out-of-bounds.
//
// Example:
// var s = [...]int{1,2,3}
// var x = s[5]
//
// Example:
// var s = []int{1,2,3}
// var _ = s[-1]
//
// Example:
// var s = []int{1,2,3}
// var i string
// var _ = s[i]
InvalidIndex
// SwappedSliceIndices occurs when constant indices in a slice expression
// are decreasing in value.
//
// Example:
// var _ = []int{1,2,3}[2:1]
SwappedSliceIndices
/* operators > slice */
// NonSliceableOperand occurs when a slice operation is applied to a value
// whose type is not sliceable, or is unaddressable.
//
// Example:
// var x = [...]int{1, 2, 3}[:1]
//
// Example:
// var x = 1
// var y = 1[:1]
NonSliceableOperand
// InvalidSliceExpr occurs when a three-index slice expression (a[x:y:z]) is
// applied to a string.
//
// Example:
// var s = "hello"
// var x = s[1:2:3]
InvalidSliceExpr
/* exprs > shift */
// InvalidShiftCount occurs when the right-hand side of a shift operation is
// either non-integer, negative, or too large.
//
// Example:
// var (
// x string
// y int = 1 << x
// )
InvalidShiftCount
// InvalidShiftOperand occurs when the shifted operand is not an integer.
//
// Example:
// var s = "hello"
// var x = s << 2
InvalidShiftOperand
/* exprs > chan */
// InvalidReceive occurs when there is a channel receive from a value that
// is either not a channel, or is a send-only channel.
//
// Example:
// func f() {
// var x = 1
// <-x
// }
InvalidReceive
// InvalidSend occurs when there is a channel send to a value that is not a
// channel, or is a receive-only channel.
//
// Example:
// func f() {
// var x = 1
// x <- "hello!"
// }
InvalidSend
/* exprs > literal */
// DuplicateLitKey occurs when an index is duplicated in a slice, array, or
// map literal.
//
// Example:
// var _ = []int{0:1, 0:2}
//
// Example:
// var _ = map[string]int{"a": 1, "a": 2}
DuplicateLitKey
// MissingLitKey occurs when a map literal is missing a key expression.
//
// Example:
// var _ = map[string]int{1}
MissingLitKey
// InvalidLitIndex occurs when the key in a key-value element of a slice or
// array literal is not an integer constant.
//
// Example:
// var i = 0
// var x = []string{i: "world"}
InvalidLitIndex
// OversizeArrayLit occurs when an array literal exceeds its length.
//
// Example:
// var _ = [2]int{1,2,3}
OversizeArrayLit
// MixedStructLit occurs when a struct literal contains a mix of positional
// and named elements.
//
// Example:
// var _ = struct{i, j int}{i: 1, 2}
MixedStructLit
// InvalidStructLit occurs when a positional struct literal has an incorrect
// number of values.
//
// Example:
// var _ = struct{i, j int}{1,2,3}
InvalidStructLit
// MissingLitField occurs when a struct literal refers to a field that does
// not exist on the struct type.
//
// Example:
// var _ = struct{i int}{j: 2}
MissingLitField
// DuplicateLitField occurs when a struct literal contains duplicated
// fields.
//
// Example:
// var _ = struct{i int}{i: 1, i: 2}
DuplicateLitField
// UnexportedLitField occurs when a positional struct literal implicitly
// assigns an unexported field of an imported type.
UnexportedLitField
// InvalidLitField occurs when a field name is not a valid identifier.
//
// Example:
// var _ = struct{i int}{1: 1}
InvalidLitField
// UntypedLit occurs when a composite literal omits a required type
// identifier.
//
// Example:
// type outer struct{
// inner struct { i int }
// }
//
// var _ = outer{inner: {1}}
UntypedLit
// InvalidLit occurs when a composite literal expression does not match its
// type.
//
// Example:
// type P *struct{
// x int
// }
// var _ = P {}
InvalidLit
/* exprs > selector */
// AmbiguousSelector occurs when a selector is ambiguous.
//
// Example:
// type E1 struct { i int }
// type E2 struct { i int }
// type T struct { E1; E2 }
//
// var x T
// var _ = x.i
AmbiguousSelector
// UndeclaredImportedName occurs when a package-qualified identifier is
// undeclared by the imported package.
//
// Example:
// import "go/types"
//
// var _ = types.NotAnActualIdentifier
UndeclaredImportedName
// UnexportedName occurs when a selector refers to an unexported identifier
// of an imported package.
//
// Example:
// import "reflect"
//
// type _ reflect.flag
UnexportedName
// UndeclaredName occurs when an identifier is not declared in the current
// scope.
//
// Example:
// var x T
UndeclaredName
// MissingFieldOrMethod occurs when a selector references a field or method
// that does not exist.
//
// Example:
// type T struct {}
//
// var x = T{}.f
MissingFieldOrMethod
/* exprs > ... */
// BadDotDotDotSyntax occurs when a "..." occurs in a context where it is
// not valid.
//
// Example:
// var _ = map[int][...]int{0: {}}
BadDotDotDotSyntax
// NonVariadicDotDotDot occurs when a "..." is used on the final argument to
// a non-variadic function.
//
// Example:
// func printArgs(s []string) {
// for _, a := range s {
// println(a)
// }
// }
//
// func f() {
// s := []string{"a", "b", "c"}
// printArgs(s...)
// }
NonVariadicDotDotDot
// MisplacedDotDotDot occurs when a "..." is used somewhere other than the
// final argument to a function call.
//
// Example:
// func printArgs(args ...int) {
// for _, a := range args {
// println(a)
// }
// }
//
// func f() {
// a := []int{1,2,3}
// printArgs(0, a...)
// }
MisplacedDotDotDot
// InvalidDotDotDotOperand occurs when a "..." operator is applied to a
// single-valued operand.
//
// Example:
// func printArgs(args ...int) {
// for _, a := range args {
// println(a)
// }
// }
//
// func f() {
// a := 1
// printArgs(a...)
// }
//
// Example:
// func args() (int, int) {
// return 1, 2
// }
//
// func printArgs(args ...int) {
// for _, a := range args {
// println(a)
// }
// }
//
// func g() {
// printArgs(args()...)
// }
InvalidDotDotDotOperand
// InvalidDotDotDot occurs when a "..." is used in a non-variadic built-in
// function.
//
// Example:
// var s = []int{1, 2, 3}
// var l = len(s...)
InvalidDotDotDot
/* exprs > built-in */
// UncalledBuiltin occurs when a built-in function is used as a
// function-valued expression, instead of being called.
//
// Per the spec:
// "The built-in functions do not have standard Go types, so they can only
// appear in call expressions; they cannot be used as function values."
//
// Example:
// var _ = copy
UncalledBuiltin
// InvalidAppend occurs when append is called with a first argument that is
// not a slice.
//
// Example:
// var _ = append(1, 2)
InvalidAppend
// InvalidCap occurs when an argument to the cap built-in function is not of
// supported type.
//
// See https://golang.org/ref/spec#Lengthand_capacity for information on
// which underlying types are supported as arguments to cap and len.
//
// Example:
// var s = 2
// var x = cap(s)
InvalidCap
// InvalidClose occurs when close(...) is called with an argument that is
// not of channel type, or that is a receive-only channel.
//
// Example:
// func f() {
// var x int
// close(x)
// }
InvalidClose
// InvalidCopy occurs when the arguments are not of slice type or do not
// have compatible type.
//
// See https://golang.org/ref/spec#Appendingand_copying_slices for more
// information on the type requirements for the copy built-in.
//
// Example:
// func f() {
// var x []int
// y := []int64{1,2,3}
// copy(x, y)
// }
InvalidCopy
// InvalidComplex occurs when the complex built-in function is called with
// arguments with incompatible types.
//
// Example:
// var _ = complex(float32(1), float64(2))
InvalidComplex
// InvalidDelete occurs when the delete built-in function is called with a
// first argument that is not a map.
//
// Example:
// func f() {
// m := "hello"
// delete(m, "e")
// }
InvalidDelete
// InvalidImag occurs when the imag built-in function is called with an
// argument that does not have complex type.
//
// Example:
// var _ = imag(int(1))
InvalidImag
// InvalidLen occurs when an argument to the len built-in function is not of
// supported type.
//
// See https://golang.org/ref/spec#Lengthand_capacity for information on
// which underlying types are supported as arguments to cap and len.
//
// Example:
// var s = 2
// var x = len(s)
InvalidLen
// SwappedMakeArgs occurs when make is called with three arguments, and its
// length argument is larger than its capacity argument.
//
// Example:
// var x = make([]int, 3, 2)
SwappedMakeArgs
// InvalidMake occurs when make is called with an unsupported type argument.
//
// See https://golang.org/ref/spec#Makingslices_maps_and_channels for
// information on the types that may be created using make.
//
// Example:
// var x = make(int)
InvalidMake
// InvalidReal occurs when the real built-in function is called with an
// argument that does not have complex type.
//
// Example:
// var _ = real(int(1))
InvalidReal
/* exprs > assertion */
// InvalidAssert occurs when a type assertion is applied to a
// value that is not of interface type.
//
// Example:
// var x = 1
// var _ = x.(float64)
InvalidAssert
// ImpossibleAssert occurs for a type assertion x.(T) when the value x of
// interface cannot have dynamic type T, due to a missing or mismatching
// method on T.
//
// Example:
// type T int
//
// func (t *T) m() int { return int(*t) }
//
// type I interface { m() int }
//
// var x I
// var _ = x.(T)
ImpossibleAssert
/* exprs > conversion */
// InvalidConversion occurs when the argument type cannot be converted to the
// target.
//
// See https://golang.org/ref/spec#Conversions for the rules of
// convertibility.
//
// Example:
// var x float64
// var _ = string(x)
InvalidConversion
// InvalidUntypedConversion occurs when an there is no valid implicit
// conversion from an untyped value satisfying the type constraints of the
// context in which it is used.
//
// Example:
// var _ = 1 + ""
InvalidUntypedConversion
/* offsetof */
// BadOffsetofSyntax occurs when unsafe.Offsetof is called with an argument
// that is not a selector expression.
//
// Example:
// import "unsafe"
//
// var x int
// var _ = unsafe.Offsetof(x)
BadOffsetofSyntax
// InvalidOffsetof occurs when unsafe.Offsetof is called with a method
// selector, rather than a field selector, or when the field is embedded via
// a pointer.
//
// Per the spec:
//
// "If f is an embedded field, it must be reachable without pointer
// indirections through fields of the struct. "
//
// Example:
// import "unsafe"
//
// type T struct { f int }
// type S struct { *T }
// var s S
// var _ = unsafe.Offsetof(s.f)
//
// Example:
// import "unsafe"
//
// type S struct{}
//
// func (S) m() {}
//
// var s S
// var _ = unsafe.Offsetof(s.m)
InvalidOffsetof
/* control flow > scope */
// UnusedExpr occurs when a side-effect free expression is used as a
// statement. Such a statement has no effect.
//
// Example:
// func f(i int) {
// i*i
// }
UnusedExpr
// UnusedVar occurs when a variable is declared but unused.
//
// Example:
// func f() {
// x := 1
// }
UnusedVar
// MissingReturn occurs when a function with results is missing a return
// statement.
//
// Example:
// func f() int {}
MissingReturn
// WrongResultCount occurs when a return statement returns an incorrect
// number of values.
//
// Example:
// func ReturnOne() int {
// return 1, 2
// }
WrongResultCount
// OutOfScopeResult occurs when the name of a value implicitly returned by
// an empty return statement is shadowed in a nested scope.
//
// Example:
// func factor(n int) (i int) {
// for i := 2; i < n; i++ {
// if n%i == 0 {
// return
// }
// }
// return 0
// }
OutOfScopeResult
/* control flow > if */
// InvalidCond occurs when an if condition is not a boolean expression.
//
// Example:
// func checkReturn(i int) {
// if i {
// panic("non-zero return")
// }
// }
InvalidCond
/* control flow > for */
// InvalidPostDecl occurs when there is a declaration in a for-loop post
// statement.
//
// Example:
// func f() {
// for i := 0; i < 10; j := 0 {}
// }
InvalidPostDecl
// InvalidChanRange occurs when a send-only channel used in a range
// expression.
//
// Example:
// func sum(c chan<- int) {
// s := 0
// for i := range c {
// s += i
// }
// }
InvalidChanRange
// InvalidIterVar occurs when two iteration variables are used while ranging
// over a channel.
//
// Example:
// func f(c chan int) {
// for k, v := range c {
// println(k, v)
// }
// }
InvalidIterVar
// InvalidRangeExpr occurs when the type of a range expression is not array,
// slice, string, map, or channel.
//
// Example:
// func f(i int) {
// for j := range i {
// println(j)
// }
// }
InvalidRangeExpr
/* control flow > switch */
// MisplacedBreak occurs when a break statement is not within a for, switch,
// or select statement of the innermost function definition.
//
// Example:
// func f() {
// break
// }
MisplacedBreak
// MisplacedContinue occurs when a continue statement is not within a for
// loop of the innermost function definition.
//
// Example:
// func sumeven(n int) int {
// proceed := func() {
// continue
// }
// sum := 0
// for i := 1; i <= n; i++ {
// if i % 2 != 0 {
// proceed()
// }
// sum += i
// }
// return sum
// }
MisplacedContinue
// MisplacedFallthrough occurs when a fallthrough statement is not within an
// expression switch.
//
// Example:
// func typename(i interface{}) string {
// switch i.(type) {
// case int64:
// fallthrough
// case int:
// return "int"
// }
// return "unsupported"
// }
MisplacedFallthrough
// DuplicateCase occurs when a type or expression switch has duplicate
// cases.
//
// Example:
// func printInt(i int) {
// switch i {
// case 1:
// println("one")
// case 1:
// println("One")
// }
// }
DuplicateCase
// DuplicateDefault occurs when a type or expression switch has multiple
// default clauses.
//
// Example:
// func printInt(i int) {
// switch i {
// case 1:
// println("one")
// default:
// println("One")
// default:
// println("1")
// }
// }
DuplicateDefault
// BadTypeKeyword occurs when a .(type) expression is used anywhere other
// than a type switch.
//
// Example:
// type I interface {
// m()
// }
// var t I
// var _ = t.(type)
BadTypeKeyword
// InvalidTypeSwitch occurs when .(type) is used on an expression that is
// not of interface type.
//
// Example:
// func f(i int) {
// switch x := i.(type) {}
// }
InvalidTypeSwitch
// InvalidExprSwitch occurs when a switch expression is not comparable.
//
// Example:
// func _() {
// var a struct{ _ func() }
// switch a /* ERROR cannot switch on a */ {
// }
// }
InvalidExprSwitch
/* control flow > select */
// InvalidSelectCase occurs when a select case is not a channel send or
// receive.
//
// Example:
// func checkChan(c <-chan int) bool {
// select {
// case c:
// return true
// default:
// return false
// }
// }
InvalidSelectCase
/* control flow > labels and jumps */
// UndeclaredLabel occurs when an undeclared label is jumped to.
//
// Example:
// func f() {
// goto L
// }
UndeclaredLabel
// DuplicateLabel occurs when a label is declared more than once.
//
// Example:
// func f() int {
// L:
// L:
// return 1
// }
DuplicateLabel
// MisplacedLabel occurs when a break or continue label is not on a for,
// switch, or select statement.
//
// Example:
// func f() {
// L:
// a := []int{1,2,3}
// for _, e := range a {
// if e > 10 {
// break L
// }
// println(a)
// }
// }
MisplacedLabel
// UnusedLabel occurs when a label is declared but not used.
//
// Example:
// func f() {
// L:
// }
UnusedLabel
// JumpOverDecl occurs when a label jumps over a variable declaration.
//
// Example:
// func f() int {
// goto L
// x := 2
// L:
// x++
// return x
// }
JumpOverDecl
// JumpIntoBlock occurs when a forward jump goes to a label inside a nested
// block.
//
// Example:
// func f(x int) {
// goto L
// if x > 0 {
// L:
// print("inside block")
// }
// }
JumpIntoBlock
/* control flow > calls */
// InvalidMethodExpr occurs when a pointer method is called but the argument
// is not addressable.
//
// Example:
// type T struct {}
//
// func (*T) m() int { return 1 }
//
// var _ = T.m(T{})
InvalidMethodExpr
// WrongArgCount occurs when too few or too many arguments are passed by a
// function call.
//
// Example:
// func f(i int) {}
// var x = f()
WrongArgCount
// InvalidCall occurs when an expression is called that is not of function
// type.
//
// Example:
// var x = "x"
// var y = x()
InvalidCall
/* control flow > suspended */
// UnusedResults occurs when a restricted expression-only built-in function
// is suspended via go or defer. Such a suspension discards the results of
// these side-effect free built-in functions, and therefore is ineffectual.
//
// Example:
// func f(a []int) int {
// defer len(a)
// return i
// }
UnusedResults
// InvalidDefer occurs when a deferred expression is not a function call,
// for example if the expression is a type conversion.
//
// Example:
// func f(i int) int {
// defer int32(i)
// return i
// }
InvalidDefer
// InvalidGo occurs when a go expression is not a function call, for example
// if the expression is a type conversion.
//
// Example:
// func f(i int) int {
// go int32(i)
// return i
// }
InvalidGo
)