x/sys/unix: regenerate darwin/arm64 outputs with the latest SDK
I did this on OS X 10.10.5 (14F27) using the iOS SDK included in Xcode
6.4 (6E35b). This commit contains the same SYS_SYSCTL -> SYS___SYSCTL
workaround found in commit 9ef4b6c; see its description for more info.
Change-Id: I4dddc2a6d030ce297ee711f4430ec9db3abcda50
Reviewed-on: https://go-review.googlesource.com/14094
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
diff --git a/unix/zerrors_darwin_arm64.go b/unix/zerrors_darwin_arm64.go
index 6f07be1..3189c6b 100644
--- a/unix/zerrors_darwin_arm64.go
+++ b/unix/zerrors_darwin_arm64.go
@@ -86,6 +86,7 @@
BIOCSBLEN = 0xc0044266
BIOCSDLT = 0x80044278
BIOCSETF = 0x80104267
+ BIOCSETFNR = 0x8010427e
BIOCSETIF = 0x8020426c
BIOCSHDRCMPLT = 0x80044275
BIOCSRSIG = 0x80044273
@@ -152,33 +153,168 @@
CSUSP = 0x1a
CTL_MAXNAME = 0xc
CTL_NET = 0x4
+ DLT_A429 = 0xb8
+ DLT_A653_ICM = 0xb9
+ DLT_AIRONET_HEADER = 0x78
+ DLT_AOS = 0xde
DLT_APPLE_IP_OVER_IEEE1394 = 0x8a
DLT_ARCNET = 0x7
+ DLT_ARCNET_LINUX = 0x81
DLT_ATM_CLIP = 0x13
DLT_ATM_RFC1483 = 0xb
+ DLT_AURORA = 0x7e
DLT_AX25 = 0x3
+ DLT_AX25_KISS = 0xca
+ DLT_BACNET_MS_TP = 0xa5
+ DLT_BLUETOOTH_HCI_H4 = 0xbb
+ DLT_BLUETOOTH_HCI_H4_WITH_PHDR = 0xc9
+ DLT_CAN20B = 0xbe
+ DLT_CAN_SOCKETCAN = 0xe3
DLT_CHAOS = 0x5
DLT_CHDLC = 0x68
+ DLT_CISCO_IOS = 0x76
DLT_C_HDLC = 0x68
+ DLT_C_HDLC_WITH_DIR = 0xcd
+ DLT_DBUS = 0xe7
+ DLT_DECT = 0xdd
+ DLT_DOCSIS = 0x8f
+ DLT_DVB_CI = 0xeb
+ DLT_ECONET = 0x73
DLT_EN10MB = 0x1
DLT_EN3MB = 0x2
+ DLT_ENC = 0x6d
+ DLT_ERF = 0xc5
+ DLT_ERF_ETH = 0xaf
+ DLT_ERF_POS = 0xb0
+ DLT_FC_2 = 0xe0
+ DLT_FC_2_WITH_FRAME_DELIMS = 0xe1
DLT_FDDI = 0xa
+ DLT_FLEXRAY = 0xd2
+ DLT_FRELAY = 0x6b
+ DLT_FRELAY_WITH_DIR = 0xce
+ DLT_GCOM_SERIAL = 0xad
+ DLT_GCOM_T1E1 = 0xac
+ DLT_GPF_F = 0xab
+ DLT_GPF_T = 0xaa
+ DLT_GPRS_LLC = 0xa9
+ DLT_GSMTAP_ABIS = 0xda
+ DLT_GSMTAP_UM = 0xd9
+ DLT_HHDLC = 0x79
+ DLT_IBM_SN = 0x92
+ DLT_IBM_SP = 0x91
DLT_IEEE802 = 0x6
DLT_IEEE802_11 = 0x69
DLT_IEEE802_11_RADIO = 0x7f
DLT_IEEE802_11_RADIO_AVS = 0xa3
+ DLT_IEEE802_15_4 = 0xc3
+ DLT_IEEE802_15_4_LINUX = 0xbf
+ DLT_IEEE802_15_4_NOFCS = 0xe6
+ DLT_IEEE802_15_4_NONASK_PHY = 0xd7
+ DLT_IEEE802_16_MAC_CPS = 0xbc
+ DLT_IEEE802_16_MAC_CPS_RADIO = 0xc1
+ DLT_IPFILTER = 0x74
+ DLT_IPMB = 0xc7
+ DLT_IPMB_LINUX = 0xd1
+ DLT_IPNET = 0xe2
+ DLT_IPOIB = 0xf2
+ DLT_IPV4 = 0xe4
+ DLT_IPV6 = 0xe5
+ DLT_IP_OVER_FC = 0x7a
+ DLT_JUNIPER_ATM1 = 0x89
+ DLT_JUNIPER_ATM2 = 0x87
+ DLT_JUNIPER_ATM_CEMIC = 0xee
+ DLT_JUNIPER_CHDLC = 0xb5
+ DLT_JUNIPER_ES = 0x84
+ DLT_JUNIPER_ETHER = 0xb2
+ DLT_JUNIPER_FIBRECHANNEL = 0xea
+ DLT_JUNIPER_FRELAY = 0xb4
+ DLT_JUNIPER_GGSN = 0x85
+ DLT_JUNIPER_ISM = 0xc2
+ DLT_JUNIPER_MFR = 0x86
+ DLT_JUNIPER_MLFR = 0x83
+ DLT_JUNIPER_MLPPP = 0x82
+ DLT_JUNIPER_MONITOR = 0xa4
+ DLT_JUNIPER_PIC_PEER = 0xae
+ DLT_JUNIPER_PPP = 0xb3
+ DLT_JUNIPER_PPPOE = 0xa7
+ DLT_JUNIPER_PPPOE_ATM = 0xa8
+ DLT_JUNIPER_SERVICES = 0x88
+ DLT_JUNIPER_SRX_E2E = 0xe9
+ DLT_JUNIPER_ST = 0xc8
+ DLT_JUNIPER_VP = 0xb7
+ DLT_JUNIPER_VS = 0xe8
+ DLT_LAPB_WITH_DIR = 0xcf
+ DLT_LAPD = 0xcb
+ DLT_LIN = 0xd4
+ DLT_LINUX_EVDEV = 0xd8
+ DLT_LINUX_IRDA = 0x90
+ DLT_LINUX_LAPD = 0xb1
+ DLT_LINUX_PPP_WITHDIRECTION = 0xa6
DLT_LINUX_SLL = 0x71
DLT_LOOP = 0x6c
+ DLT_LTALK = 0x72
+ DLT_MATCHING_MAX = 0xf5
+ DLT_MATCHING_MIN = 0x68
+ DLT_MFR = 0xb6
+ DLT_MOST = 0xd3
+ DLT_MPEG_2_TS = 0xf3
+ DLT_MPLS = 0xdb
+ DLT_MTP2 = 0x8c
+ DLT_MTP2_WITH_PHDR = 0x8b
+ DLT_MTP3 = 0x8d
+ DLT_MUX27010 = 0xec
+ DLT_NETANALYZER = 0xf0
+ DLT_NETANALYZER_TRANSPARENT = 0xf1
+ DLT_NFC_LLCP = 0xf5
+ DLT_NFLOG = 0xef
+ DLT_NG40 = 0xf4
DLT_NULL = 0x0
+ DLT_PCI_EXP = 0x7d
DLT_PFLOG = 0x75
DLT_PFSYNC = 0x12
+ DLT_PPI = 0xc0
DLT_PPP = 0x9
DLT_PPP_BSDOS = 0x10
+ DLT_PPP_ETHER = 0x33
+ DLT_PPP_PPPD = 0xa6
DLT_PPP_SERIAL = 0x32
+ DLT_PPP_WITH_DIR = 0xcc
+ DLT_PPP_WITH_DIRECTION = 0xa6
+ DLT_PRISM_HEADER = 0x77
DLT_PRONET = 0x4
+ DLT_RAIF1 = 0xc6
DLT_RAW = 0xc
+ DLT_RIO = 0x7c
+ DLT_SCCP = 0x8e
+ DLT_SITA = 0xc4
DLT_SLIP = 0x8
DLT_SLIP_BSDOS = 0xf
+ DLT_STANAG_5066_D_PDU = 0xed
+ DLT_SUNATM = 0x7b
+ DLT_SYMANTEC_FIREWALL = 0x63
+ DLT_TZSP = 0x80
+ DLT_USB = 0xba
+ DLT_USB_LINUX = 0xbd
+ DLT_USB_LINUX_MMAPPED = 0xdc
+ DLT_USER0 = 0x93
+ DLT_USER1 = 0x94
+ DLT_USER10 = 0x9d
+ DLT_USER11 = 0x9e
+ DLT_USER12 = 0x9f
+ DLT_USER13 = 0xa0
+ DLT_USER14 = 0xa1
+ DLT_USER15 = 0xa2
+ DLT_USER2 = 0x95
+ DLT_USER3 = 0x96
+ DLT_USER4 = 0x97
+ DLT_USER5 = 0x98
+ DLT_USER6 = 0x99
+ DLT_USER7 = 0x9a
+ DLT_USER8 = 0x9b
+ DLT_USER9 = 0x9c
+ DLT_WIHART = 0xdf
+ DLT_X2E_SERIAL = 0xd5
+ DLT_X2E_XORAYA = 0xd6
DT_BLK = 0x6
DT_CHR = 0x2
DT_DIR = 0x4
@@ -347,6 +483,7 @@
IFT_PDP = 0xff
IFT_PFLOG = 0xf5
IFT_PFSYNC = 0xf6
+ IFT_PKTAP = 0xfe
IFT_PPP = 0x17
IFT_PROPMUX = 0x36
IFT_PROPVIRTUAL = 0x35
@@ -515,7 +652,7 @@
IPV6_FAITH = 0x1d
IPV6_FLOWINFO_MASK = 0xffffff0f
IPV6_FLOWLABEL_MASK = 0xffff0f00
- IPV6_FRAGTTL = 0x78
+ IPV6_FRAGTTL = 0x3c
IPV6_FW_ADD = 0x1e
IPV6_FW_DEL = 0x1f
IPV6_FW_FLUSH = 0x20
@@ -830,6 +967,7 @@
RTF_LOCAL = 0x200000
RTF_MODIFIED = 0x20
RTF_MULTICAST = 0x800000
+ RTF_NOIFREF = 0x2000
RTF_PINNED = 0x100000
RTF_PRCLONING = 0x10000
RTF_PROTO1 = 0x8000
@@ -1291,3 +1429,148 @@
SIGXCPU = syscall.Signal(0x18)
SIGXFSZ = syscall.Signal(0x19)
)
+
+// Error table
+var errors = [...]string{
+ 1: "operation not permitted",
+ 2: "no such file or directory",
+ 3: "no such process",
+ 4: "interrupted system call",
+ 5: "input/output error",
+ 6: "device not configured",
+ 7: "argument list too long",
+ 8: "exec format error",
+ 9: "bad file descriptor",
+ 10: "no child processes",
+ 11: "resource deadlock avoided",
+ 12: "cannot allocate memory",
+ 13: "permission denied",
+ 14: "bad address",
+ 15: "block device required",
+ 16: "resource busy",
+ 17: "file exists",
+ 18: "cross-device link",
+ 19: "operation not supported by device",
+ 20: "not a directory",
+ 21: "is a directory",
+ 22: "invalid argument",
+ 23: "too many open files in system",
+ 24: "too many open files",
+ 25: "inappropriate ioctl for device",
+ 26: "text file busy",
+ 27: "file too large",
+ 28: "no space left on device",
+ 29: "illegal seek",
+ 30: "read-only file system",
+ 31: "too many links",
+ 32: "broken pipe",
+ 33: "numerical argument out of domain",
+ 34: "result too large",
+ 35: "resource temporarily unavailable",
+ 36: "operation now in progress",
+ 37: "operation already in progress",
+ 38: "socket operation on non-socket",
+ 39: "destination address required",
+ 40: "message too long",
+ 41: "protocol wrong type for socket",
+ 42: "protocol not available",
+ 43: "protocol not supported",
+ 44: "socket type not supported",
+ 45: "operation not supported",
+ 46: "protocol family not supported",
+ 47: "address family not supported by protocol family",
+ 48: "address already in use",
+ 49: "can't assign requested address",
+ 50: "network is down",
+ 51: "network is unreachable",
+ 52: "network dropped connection on reset",
+ 53: "software caused connection abort",
+ 54: "connection reset by peer",
+ 55: "no buffer space available",
+ 56: "socket is already connected",
+ 57: "socket is not connected",
+ 58: "can't send after socket shutdown",
+ 59: "too many references: can't splice",
+ 60: "operation timed out",
+ 61: "connection refused",
+ 62: "too many levels of symbolic links",
+ 63: "file name too long",
+ 64: "host is down",
+ 65: "no route to host",
+ 66: "directory not empty",
+ 67: "too many processes",
+ 68: "too many users",
+ 69: "disc quota exceeded",
+ 70: "stale NFS file handle",
+ 71: "too many levels of remote in path",
+ 72: "RPC struct is bad",
+ 73: "RPC version wrong",
+ 74: "RPC prog. not avail",
+ 75: "program version wrong",
+ 76: "bad procedure for program",
+ 77: "no locks available",
+ 78: "function not implemented",
+ 79: "inappropriate file type or format",
+ 80: "authentication error",
+ 81: "need authenticator",
+ 82: "device power is off",
+ 83: "device error",
+ 84: "value too large to be stored in data type",
+ 85: "bad executable (or shared library)",
+ 86: "bad CPU type in executable",
+ 87: "shared library version mismatch",
+ 88: "malformed Mach-o file",
+ 89: "operation canceled",
+ 90: "identifier removed",
+ 91: "no message of desired type",
+ 92: "illegal byte sequence",
+ 93: "attribute not found",
+ 94: "bad message",
+ 95: "EMULTIHOP (Reserved)",
+ 96: "no message available on STREAM",
+ 97: "ENOLINK (Reserved)",
+ 98: "no STREAM resources",
+ 99: "not a STREAM",
+ 100: "protocol error",
+ 101: "STREAM ioctl timeout",
+ 102: "operation not supported on socket",
+ 103: "policy not found",
+ 104: "state not recoverable",
+ 105: "previous owner died",
+ 106: "interface output queue is full",
+}
+
+// Signal table
+var signals = [...]string{
+ 1: "hangup",
+ 2: "interrupt",
+ 3: "quit",
+ 4: "illegal instruction",
+ 5: "trace/BPT trap",
+ 6: "abort trap",
+ 7: "EMT trap",
+ 8: "floating point exception",
+ 9: "killed",
+ 10: "bus error",
+ 11: "segmentation fault",
+ 12: "bad system call",
+ 13: "broken pipe",
+ 14: "alarm clock",
+ 15: "terminated",
+ 16: "urgent I/O condition",
+ 17: "suspended (signal)",
+ 18: "suspended",
+ 19: "continued",
+ 20: "child exited",
+ 21: "stopped (tty input)",
+ 22: "stopped (tty output)",
+ 23: "I/O possible",
+ 24: "cputime limit exceeded",
+ 25: "filesize limit exceeded",
+ 26: "virtual timer expired",
+ 27: "profiling timer expired",
+ 28: "window size changes",
+ 29: "information request",
+ 30: "user defined signal 1",
+ 31: "user defined signal 2",
+}
