diff --git a/cpu/cpu.go b/cpu/cpu.go
index b56886f..83f112c 100644
--- a/cpu/cpu.go
+++ b/cpu/cpu.go
@@ -106,8 +106,8 @@
 
 // ARM contains the supported CPU features of the current ARM (32-bit) platform.
 // All feature flags are false if:
-//   1. the current platform is not arm, or
-//   2. the current operating system is not Linux.
+//  1. the current platform is not arm, or
+//  2. the current operating system is not Linux.
 var ARM struct {
 	_           CacheLinePad
 	HasSWP      bool // SWP instruction support
diff --git a/plan9/mksyscall.go b/plan9/mksyscall.go
index 2d07e8b..a5062c2 100644
--- a/plan9/mksyscall.go
+++ b/plan9/mksyscall.go
@@ -10,11 +10,11 @@
 (like syscall_plan9.go) and generates system call bodies.
 The prototypes are marked by lines beginning with "//sys"
 and read like func declarations if //sys is replaced by func, but:
-	* The parameter lists must give a name for each argument.
-	  This includes return parameters.
-	* The parameter lists must give a type for each argument:
-	  the (x, y, z int) shorthand is not allowed.
-	* If the return parameter is an error number, it must be named errno.
+  - The parameter lists must give a name for each argument.
+    This includes return parameters.
+  - The parameter lists must give a type for each argument:
+    the (x, y, z int) shorthand is not allowed.
+  - If the return parameter is an error number, it must be named errno.
 
 A line beginning with //sysnb is like //sys, except that the
 goroutine will not be suspended during the execution of the system
diff --git a/plan9/syscall.go b/plan9/syscall.go
index 602473c..a25223b 100644
--- a/plan9/syscall.go
+++ b/plan9/syscall.go
@@ -113,5 +113,6 @@
 
 // use is a no-op, but the compiler cannot see that it is.
 // Calling use(p) ensures that p is kept live until that point.
+//
 //go:noescape
 func use(p unsafe.Pointer)
diff --git a/plan9/syscall_plan9.go b/plan9/syscall_plan9.go
index 723b1f4..d079d81 100644
--- a/plan9/syscall_plan9.go
+++ b/plan9/syscall_plan9.go
@@ -115,6 +115,7 @@
 var ioSync int64
 
 //sys	fd2path(fd int, buf []byte) (err error)
+
 func Fd2path(fd int) (path string, err error) {
 	var buf [512]byte
 
@@ -126,6 +127,7 @@
 }
 
 //sys	pipe(p *[2]int32) (err error)
+
 func Pipe(p []int) (err error) {
 	if len(p) != 2 {
 		return syscall.ErrorString("bad arg in system call")
@@ -180,6 +182,7 @@
 }
 
 //sys	await(s []byte) (n int, err error)
+
 func Await(w *Waitmsg) (err error) {
 	var buf [512]byte
 	var f [5][]byte
@@ -301,42 +304,49 @@
 }
 
 //sys	open(path string, mode int) (fd int, err error)
+
 func Open(path string, mode int) (fd int, err error) {
 	fixwd()
 	return open(path, mode)
 }
 
 //sys	create(path string, mode int, perm uint32) (fd int, err error)
+
 func Create(path string, mode int, perm uint32) (fd int, err error) {
 	fixwd()
 	return create(path, mode, perm)
 }
 
 //sys	remove(path string) (err error)
+
 func Remove(path string) error {
 	fixwd()
 	return remove(path)
 }
 
 //sys	stat(path string, edir []byte) (n int, err error)
+
 func Stat(path string, edir []byte) (n int, err error) {
 	fixwd()
 	return stat(path, edir)
 }
 
 //sys	bind(name string, old string, flag int) (err error)
+
 func Bind(name string, old string, flag int) (err error) {
 	fixwd()
 	return bind(name, old, flag)
 }
 
 //sys	mount(fd int, afd int, old string, flag int, aname string) (err error)
+
 func Mount(fd int, afd int, old string, flag int, aname string) (err error) {
 	fixwd()
 	return mount(fd, afd, old, flag, aname)
 }
 
 //sys	wstat(path string, edir []byte) (err error)
+
 func Wstat(path string, edir []byte) (err error) {
 	fixwd()
 	return wstat(path, edir)
diff --git a/unix/internal/mkmerge/mkmerge.go b/unix/internal/mkmerge/mkmerge.go
index f307c30..3dda84d 100644
--- a/unix/internal/mkmerge/mkmerge.go
+++ b/unix/internal/mkmerge/mkmerge.go
@@ -6,18 +6,20 @@
 // consts, funcs, and types into a common source file, per GOOS.
 //
 // Usage:
-//     $ mkmerge -out MERGED FILE [FILE ...]
+//
+//	$ mkmerge -out MERGED FILE [FILE ...]
 //
 // Example:
-//     # Remove all common consts, funcs, and types from zerrors_linux_*.go
-//     # and write the common code into zerrors_linux.go
-//     $ mkmerge -out zerrors_linux.go zerrors_linux_*.go
+//
+//	# Remove all common consts, funcs, and types from zerrors_linux_*.go
+//	# and write the common code into zerrors_linux.go
+//	$ mkmerge -out zerrors_linux.go zerrors_linux_*.go
 //
 // mkmerge performs the merge in the following steps:
-//     1. Construct the set of common code that is identical in all
-//        architecture-specific files.
-//     2. Write this common code to the merged file.
-//     3. Remove the common code from all architecture-specific files.
+//  1. Construct the set of common code that is identical in all
+//     architecture-specific files.
+//  2. Write this common code to the merged file.
+//  3. Remove the common code from all architecture-specific files.
 package main
 
 import (
diff --git a/unix/mkasm_darwin.go b/unix/mkasm_darwin.go
index 49b1c94..4e33c7a 100644
--- a/unix/mkasm_darwin.go
+++ b/unix/mkasm_darwin.go
@@ -6,7 +6,7 @@
 // +build ignore
 
 // mkasm_darwin.go generates assembly trampolines to call libSystem routines from Go.
-//This program must be run after mksyscall.go.
+// This program must be run after mksyscall.go.
 package main
 
 import (
diff --git a/unix/mksyscall.go b/unix/mksyscall.go
index 9df3c87..e9bf2de 100644
--- a/unix/mksyscall.go
+++ b/unix/mksyscall.go
@@ -10,11 +10,11 @@
 (like syscall_darwin.go) and generates system call bodies.
 The prototypes are marked by lines beginning with "//sys"
 and read like func declarations if //sys is replaced by func, but:
-	* The parameter lists must give a name for each argument.
-	  This includes return parameters.
-	* The parameter lists must give a type for each argument:
-	  the (x, y, z int) shorthand is not allowed.
-	* If the return parameter is an error number, it must be named errno.
+  - The parameter lists must give a name for each argument.
+    This includes return parameters.
+  - The parameter lists must give a type for each argument:
+    the (x, y, z int) shorthand is not allowed.
+  - If the return parameter is an error number, it must be named errno.
 
 A line beginning with //sysnb is like //sys, except that the
 goroutine will not be suspended during the execution of the system
diff --git a/unix/mksyscall_aix_ppc.go b/unix/mksyscall_aix_ppc.go
index 0143137..e3e0dd2 100644
--- a/unix/mksyscall_aix_ppc.go
+++ b/unix/mksyscall_aix_ppc.go
@@ -10,15 +10,15 @@
 (like syscall_aix.go) and generates system call bodies.
 The prototypes are marked by lines beginning with "//sys"
 and read like func declarations if //sys is replaced by func, but:
-	* The parameter lists must give a name for each argument.
-	  This includes return parameters.
-	* The parameter lists must give a type for each argument:
-	  the (x, y, z int) shorthand is not allowed.
-	* If the return parameter is an error number, it must be named err.
-	* If go func name needs to be different than its libc name,
-	* or the function is not in libc, name could be specified
-	* at the end, after "=" sign, like
-	  //sys	getsockopt(s int, level int, name int, val uintptr, vallen *_Socklen) (err error) = libsocket.getsockopt
+  - The parameter lists must give a name for each argument.
+    This includes return parameters.
+  - The parameter lists must give a type for each argument:
+    the (x, y, z int) shorthand is not allowed.
+  - If the return parameter is an error number, it must be named err.
+  - If go func name needs to be different than its libc name,
+  - or the function is not in libc, name could be specified
+  - at the end, after "=" sign, like
+    //sys	getsockopt(s int, level int, name int, val uintptr, vallen *_Socklen) (err error) = libsocket.getsockopt
 */
 package main
 
diff --git a/unix/syscall_aix.go b/unix/syscall_aix.go
index f2a114f..ad22c33 100644
--- a/unix/syscall_aix.go
+++ b/unix/syscall_aix.go
@@ -37,6 +37,7 @@
 }
 
 //sys	utimes(path string, times *[2]Timeval) (err error)
+
 func Utimes(path string, tv []Timeval) error {
 	if len(tv) != 2 {
 		return EINVAL
@@ -45,6 +46,7 @@
 }
 
 //sys	utimensat(dirfd int, path string, times *[2]Timespec, flag int) (err error)
+
 func UtimesNano(path string, ts []Timespec) error {
 	if len(ts) != 2 {
 		return EINVAL
@@ -300,11 +302,13 @@
 }
 
 //sys	getdirent(fd int, buf []byte) (n int, err error)
+
 func Getdents(fd int, buf []byte) (n int, err error) {
 	return getdirent(fd, buf)
 }
 
 //sys	wait4(pid Pid_t, status *_C_int, options int, rusage *Rusage) (wpid Pid_t, err error)
+
 func Wait4(pid int, wstatus *WaitStatus, options int, rusage *Rusage) (wpid int, err error) {
 	var status _C_int
 	var r Pid_t
@@ -372,6 +376,7 @@
 //sys	fcntl(fd int, cmd int, arg int) (val int, err error)
 
 //sys	fsyncRange(fd int, how int, start int64, length int64) (err error) = fsync_range
+
 func Fsync(fd int) error {
 	return fsyncRange(fd, O_SYNC, 0, 0)
 }
@@ -536,6 +541,7 @@
 //sys	Getsystemcfg(label int) (n uint64)
 
 //sys	umount(target string) (err error)
+
 func Unmount(target string, flags int) (err error) {
 	if flags != 0 {
 		// AIX doesn't have any flags for umount.
diff --git a/unix/syscall_dragonfly.go b/unix/syscall_dragonfly.go
index c61e274..61c0d0d 100644
--- a/unix/syscall_dragonfly.go
+++ b/unix/syscall_dragonfly.go
@@ -125,11 +125,13 @@
 }
 
 //sys	extpread(fd int, p []byte, flags int, offset int64) (n int, err error)
+
 func pread(fd int, p []byte, offset int64) (n int, err error) {
 	return extpread(fd, p, 0, offset)
 }
 
 //sys	extpwrite(fd int, p []byte, flags int, offset int64) (n int, err error)
+
 func pwrite(fd int, p []byte, offset int64) (n int, err error) {
 	return extpwrite(fd, p, 0, offset)
 }
diff --git a/unix/syscall_linux.go b/unix/syscall_linux.go
index d251daf..c8d2032 100644
--- a/unix/syscall_linux.go
+++ b/unix/syscall_linux.go
@@ -512,24 +512,24 @@
 //
 // Server example:
 //
-//      fd, _ := Socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM)
-//      _ = unix.Bind(fd, &unix.SockaddrRFCOMM{
-//      	Channel: 1,
-//      	Addr:    [6]uint8{0, 0, 0, 0, 0, 0}, // BDADDR_ANY or 00:00:00:00:00:00
-//      })
-//      _ = Listen(fd, 1)
-//      nfd, sa, _ := Accept(fd)
-//      fmt.Printf("conn addr=%v fd=%d", sa.(*unix.SockaddrRFCOMM).Addr, nfd)
-//      Read(nfd, buf)
+//	fd, _ := Socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM)
+//	_ = unix.Bind(fd, &unix.SockaddrRFCOMM{
+//		Channel: 1,
+//		Addr:    [6]uint8{0, 0, 0, 0, 0, 0}, // BDADDR_ANY or 00:00:00:00:00:00
+//	})
+//	_ = Listen(fd, 1)
+//	nfd, sa, _ := Accept(fd)
+//	fmt.Printf("conn addr=%v fd=%d", sa.(*unix.SockaddrRFCOMM).Addr, nfd)
+//	Read(nfd, buf)
 //
 // Client example:
 //
-//      fd, _ := Socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM)
-//      _ = Connect(fd, &SockaddrRFCOMM{
-//      	Channel: 1,
-//      	Addr:    [6]byte{0x11, 0x22, 0x33, 0xaa, 0xbb, 0xcc}, // CC:BB:AA:33:22:11
-//      })
-//      Write(fd, []byte(`hello`))
+//	fd, _ := Socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM)
+//	_ = Connect(fd, &SockaddrRFCOMM{
+//		Channel: 1,
+//		Addr:    [6]byte{0x11, 0x22, 0x33, 0xaa, 0xbb, 0xcc}, // CC:BB:AA:33:22:11
+//	})
+//	Write(fd, []byte(`hello`))
 type SockaddrRFCOMM struct {
 	// Addr represents a bluetooth address, byte ordering is little-endian.
 	Addr [6]uint8
@@ -556,12 +556,12 @@
 // The SockaddrCAN struct must be bound to the socket file descriptor
 // using Bind before the CAN socket can be used.
 //
-//      // Read one raw CAN frame
-//      fd, _ := Socket(AF_CAN, SOCK_RAW, CAN_RAW)
-//      addr := &SockaddrCAN{Ifindex: index}
-//      Bind(fd, addr)
-//      frame := make([]byte, 16)
-//      Read(fd, frame)
+//	// Read one raw CAN frame
+//	fd, _ := Socket(AF_CAN, SOCK_RAW, CAN_RAW)
+//	addr := &SockaddrCAN{Ifindex: index}
+//	Bind(fd, addr)
+//	frame := make([]byte, 16)
+//	Read(fd, frame)
 //
 // The full SocketCAN documentation can be found in the linux kernel
 // archives at: https://www.kernel.org/doc/Documentation/networking/can.txt
@@ -632,13 +632,13 @@
 // Here is an example of using an AF_ALG socket with SHA1 hashing.
 // The initial socket setup process is as follows:
 //
-//      // Open a socket to perform SHA1 hashing.
-//      fd, _ := unix.Socket(unix.AF_ALG, unix.SOCK_SEQPACKET, 0)
-//      addr := &unix.SockaddrALG{Type: "hash", Name: "sha1"}
-//      unix.Bind(fd, addr)
-//      // Note: unix.Accept does not work at this time; must invoke accept()
-//      // manually using unix.Syscall.
-//      hashfd, _, _ := unix.Syscall(unix.SYS_ACCEPT, uintptr(fd), 0, 0)
+//	// Open a socket to perform SHA1 hashing.
+//	fd, _ := unix.Socket(unix.AF_ALG, unix.SOCK_SEQPACKET, 0)
+//	addr := &unix.SockaddrALG{Type: "hash", Name: "sha1"}
+//	unix.Bind(fd, addr)
+//	// Note: unix.Accept does not work at this time; must invoke accept()
+//	// manually using unix.Syscall.
+//	hashfd, _, _ := unix.Syscall(unix.SYS_ACCEPT, uintptr(fd), 0, 0)
 //
 // Once a file descriptor has been returned from Accept, it may be used to
 // perform SHA1 hashing. The descriptor is not safe for concurrent use, but
@@ -647,39 +647,39 @@
 // When hashing a small byte slice or string, a single Write and Read may
 // be used:
 //
-//      // Assume hashfd is already configured using the setup process.
-//      hash := os.NewFile(hashfd, "sha1")
-//      // Hash an input string and read the results. Each Write discards
-//      // previous hash state. Read always reads the current state.
-//      b := make([]byte, 20)
-//      for i := 0; i < 2; i++ {
-//          io.WriteString(hash, "Hello, world.")
-//          hash.Read(b)
-//          fmt.Println(hex.EncodeToString(b))
-//      }
-//      // Output:
-//      // 2ae01472317d1935a84797ec1983ae243fc6aa28
-//      // 2ae01472317d1935a84797ec1983ae243fc6aa28
+//	// Assume hashfd is already configured using the setup process.
+//	hash := os.NewFile(hashfd, "sha1")
+//	// Hash an input string and read the results. Each Write discards
+//	// previous hash state. Read always reads the current state.
+//	b := make([]byte, 20)
+//	for i := 0; i < 2; i++ {
+//	    io.WriteString(hash, "Hello, world.")
+//	    hash.Read(b)
+//	    fmt.Println(hex.EncodeToString(b))
+//	}
+//	// Output:
+//	// 2ae01472317d1935a84797ec1983ae243fc6aa28
+//	// 2ae01472317d1935a84797ec1983ae243fc6aa28
 //
 // For hashing larger byte slices, or byte streams such as those read from
 // a file or socket, use Sendto with MSG_MORE to instruct the kernel to update
 // the hash digest instead of creating a new one for a given chunk and finalizing it.
 //
-//      // Assume hashfd and addr are already configured using the setup process.
-//      hash := os.NewFile(hashfd, "sha1")
-//      // Hash the contents of a file.
-//      f, _ := os.Open("/tmp/linux-4.10-rc7.tar.xz")
-//      b := make([]byte, 4096)
-//      for {
-//          n, err := f.Read(b)
-//          if err == io.EOF {
-//              break
-//          }
-//          unix.Sendto(hashfd, b[:n], unix.MSG_MORE, addr)
-//      }
-//      hash.Read(b)
-//      fmt.Println(hex.EncodeToString(b))
-//      // Output: 85cdcad0c06eef66f805ecce353bec9accbeecc5
+//	// Assume hashfd and addr are already configured using the setup process.
+//	hash := os.NewFile(hashfd, "sha1")
+//	// Hash the contents of a file.
+//	f, _ := os.Open("/tmp/linux-4.10-rc7.tar.xz")
+//	b := make([]byte, 4096)
+//	for {
+//	    n, err := f.Read(b)
+//	    if err == io.EOF {
+//	        break
+//	    }
+//	    unix.Sendto(hashfd, b[:n], unix.MSG_MORE, addr)
+//	}
+//	hash.Read(b)
+//	fmt.Println(hex.EncodeToString(b))
+//	// Output: 85cdcad0c06eef66f805ecce353bec9accbeecc5
 //
 // For more information, see: http://www.chronox.de/crypto-API/crypto/userspace-if.html.
 type SockaddrALG struct {
diff --git a/unix/syscall_openbsd.go b/unix/syscall_openbsd.go
index 15d637d..78daceb 100644
--- a/unix/syscall_openbsd.go
+++ b/unix/syscall_openbsd.go
@@ -81,6 +81,7 @@
 }
 
 //sysnb	pipe2(p *[2]_C_int, flags int) (err error)
+
 func Pipe2(p []int, flags int) error {
 	if len(p) != 2 {
 		return EINVAL
@@ -95,6 +96,7 @@
 }
 
 //sys	Getdents(fd int, buf []byte) (n int, err error)
+
 func Getdirentries(fd int, buf []byte, basep *uintptr) (n int, err error) {
 	n, err = Getdents(fd, buf)
 	if err != nil || basep == nil {
diff --git a/windows/exec_windows.go b/windows/exec_windows.go
index 855698b..75980fd 100644
--- a/windows/exec_windows.go
+++ b/windows/exec_windows.go
@@ -15,11 +15,11 @@
 // in http://msdn.microsoft.com/en-us/library/ms880421.
 // This function returns "" (2 double quotes) if s is empty.
 // Alternatively, these transformations are done:
-// - every back slash (\) is doubled, but only if immediately
-//   followed by double quote (");
-// - every double quote (") is escaped by back slash (\);
-// - finally, s is wrapped with double quotes (arg -> "arg"),
-//   but only if there is space or tab inside s.
+//   - every back slash (\) is doubled, but only if immediately
+//     followed by double quote (");
+//   - every double quote (") is escaped by back slash (\);
+//   - finally, s is wrapped with double quotes (arg -> "arg"),
+//     but only if there is space or tab inside s.
 func EscapeArg(s string) string {
 	if len(s) == 0 {
 		return "\"\""
diff --git a/windows/mkwinsyscall/mkwinsyscall.go b/windows/mkwinsyscall/mkwinsyscall.go
index 5818e84..b080c53 100644
--- a/windows/mkwinsyscall/mkwinsyscall.go
+++ b/windows/mkwinsyscall/mkwinsyscall.go
@@ -12,32 +12,34 @@
 The prototypes are marked by lines beginning with "//sys" and read
 like func declarations if //sys is replaced by func, but:
 
-* The parameter lists must give a name for each argument. This
-  includes return parameters.
+  - The parameter lists must give a name for each argument. This
+    includes return parameters.
 
-* The parameter lists must give a type for each argument:
-  the (x, y, z int) shorthand is not allowed.
+  - The parameter lists must give a type for each argument:
+    the (x, y, z int) shorthand is not allowed.
 
-* If the return parameter is an error number, it must be named err.
+  - If the return parameter is an error number, it must be named err.
 
-* If go func name needs to be different from its winapi dll name,
-  the winapi name could be specified at the end, after "=" sign, like
-  //sys LoadLibrary(libname string) (handle uint32, err error) = LoadLibraryA
+  - If go func name needs to be different from its winapi dll name,
+    the winapi name could be specified at the end, after "=" sign, like
+    //sys LoadLibrary(libname string) (handle uint32, err error) = LoadLibraryA
 
-* Each function that returns err needs to supply a condition, that
-  return value of winapi will be tested against to detect failure.
-  This would set err to windows "last-error", otherwise it will be nil.
-  The value can be provided at end of //sys declaration, like
-  //sys LoadLibrary(libname string) (handle uint32, err error) [failretval==-1] = LoadLibraryA
-  and is [failretval==0] by default.
+  - Each function that returns err needs to supply a condition, that
+    return value of winapi will be tested against to detect failure.
+    This would set err to windows "last-error", otherwise it will be nil.
+    The value can be provided at end of //sys declaration, like
+    //sys LoadLibrary(libname string) (handle uint32, err error) [failretval==-1] = LoadLibraryA
+    and is [failretval==0] by default.
 
-* If the function name ends in a "?", then the function not existing is non-
-  fatal, and an error will be returned instead of panicking.
+  - If the function name ends in a "?", then the function not existing is non-
+    fatal, and an error will be returned instead of panicking.
 
 Usage:
+
 	mkwinsyscall [flags] [path ...]
 
 The flags are:
+
 	-output
 		Specify output file name (outputs to console if blank).
 	-trace
diff --git a/windows/registry/key.go b/windows/registry/key.go
index 906325e..6c8d97b 100644
--- a/windows/registry/key.go
+++ b/windows/registry/key.go
@@ -20,7 +20,6 @@
 //		log.Fatal(err)
 //	}
 //	fmt.Printf("Windows system root is %q\n", s)
-//
 package registry
 
 import (
diff --git a/windows/svc/debug/service.go b/windows/svc/debug/service.go
index 3b41899..475b78e 100644
--- a/windows/svc/debug/service.go
+++ b/windows/svc/debug/service.go
@@ -6,7 +6,6 @@
 // +build windows
 
 // Package debug provides facilities to execute svc.Handler on console.
-//
 package debug
 
 import (
diff --git a/windows/svc/eventlog/log.go b/windows/svc/eventlog/log.go
index a1796fb..f37b4b5 100644
--- a/windows/svc/eventlog/log.go
+++ b/windows/svc/eventlog/log.go
@@ -6,7 +6,6 @@
 // +build windows
 
 // Package eventlog implements access to Windows event log.
-//
 package eventlog
 
 import (
diff --git a/windows/svc/example/main.go b/windows/svc/example/main.go
index a47650f..2ea7330 100644
--- a/windows/svc/example/main.go
+++ b/windows/svc/example/main.go
@@ -12,7 +12,6 @@
 // stop / start / pause / continue any service, and how to
 // write to event log. It also shows how to use debug
 // facilities available in debug package.
-//
 package main
 
 import (
diff --git a/windows/svc/mgr/mgr.go b/windows/svc/mgr/mgr.go
index de75f4a..c2dc870 100644
--- a/windows/svc/mgr/mgr.go
+++ b/windows/svc/mgr/mgr.go
@@ -9,7 +9,6 @@
 // It can be used to install and remove them. It can also start,
 // stop and pause them. The package can query / change current
 // service state and config parameters.
-//
 package mgr
 
 import (
diff --git a/windows/svc/service.go b/windows/svc/service.go
index 5b05c3e..806baa0 100644
--- a/windows/svc/service.go
+++ b/windows/svc/service.go
@@ -6,7 +6,6 @@
 // +build windows
 
 // Package svc provides everything required to build Windows service.
-//
 package svc
 
 import (