Author(s): Michael Matloob
Last updated: 2021-04-22
Discussion at https://golang.org/issue/45713.
This proposal describes a new workspace mode in the
go command for editing multiple modules. The presence of a
go.work file in the working directory or a containing directory will put the
go command into workspace mode. The
go.work file specifies a set of local modules that comprise a workspace. When invoked in workspace mode, the
go command will always select these modules and a consistent set of dependencies.
gocommand is invoked. This module is used as the starting point when running MVS. This proposal proposes allowing multiple main modules.
gocommand determines which modules and packages it's building and how dependencies are resolved. For example the
-mod=readonlymode uses the versions of the modules listed in the
go.modfile and fails if it would need to add in a new module dependency, and the
-mod=vendormode uses the modules in the
Users often want to make changes across multiple modules: for instance, to introduce a new interface in a package in one module along with a usage of that interface in another module. Normally, the
go command recognizes a single “main” module the user can edit. Other modules are read-only and are loaded from the module cache. The
replace directive is the exception: it allows users to replace the resolved version of a module with a working version on disk. But working with the replace directive can often be awkward: each module developer might have working versions at different location on disk, so having the directive in a file that needs to be distributed with the module isn't a good fit for all use cases.
gopls offers users a convenient way to make changes across modules without needing to manipulate replacements. When multiple modules are opened in a
gopls workspace, it synthesizes a single go.mod file, called a supermodule that pulls in each of the modules being worked on. The supermodule results in a single build list allowing the tooling to surface changes made in a dependency module to a dependent module. But this means that
gopls is building with a different set of versions than an invocation of the
go command from the command line, potentially producing different results. Users would have a better experience if they could create a configuration that could be used by
gopls as well as their direct invocations of
cmd/go and other tools. See the Multi-project gopls workspaces document and proposal issues #37720 and #32394.
This proposal specifically tries to improve the experience in the
go command (and the tools using it) for working in multi-module workspaces. That means the following are out of scope:
This proposal does not address the problem of tagging and releasing new versions of modules so that new versions of dependent modules depend on new versions of the dependency modules. But these sorts of features don't belong in the
go command. Even so, the workspace file can be useful for a future tool or feature that solves the tagging and releasing problem: the workspace would help the tool know the set of modules the user is working on, and together with the module dependency graph, the tool would be able to determine versions for the new modules.
It would be useful for module developers to build and test their modules with the same build list seen by users of their modules. Unfortunately, there are many such build lists because those build lists depend on the set of modules the user‘s module requires, and the user needs to know what those modules are. So this proposal doesn’t try to solve that problem. But this proposal can make it easier to switch between multiple configurations, which opens the door for other tools for testing modules in different configurations.
-workfile flag will be accepted by module-aware build commands and most
go mod subcommands. The following is a table of which commands can operate in workspace mode and which can operate in module mode. Commands that can operate in workspace mode will accept
-workfile and follow the workspace resolution steps below.
go mod download,
go mod graph,
go mod verify and
go mod why all have meanings based on the build list, so they will all work in workspace mode according to the build list.
go mod edit,
go mod init
go mod tidy and
go mod vendor only make sense in a single module context, so they will ignore the workspace.
go get could make sense in workspace mode but not in all contexts, so it will also ignore the workspace.
-workfile is set to
off, workspace mode will be disabled. If it is
auto (the default), workspace mode will be enabled if a file named
go.work is found in the current directory (or any of its parent directories), and disabled otherwise. If
-workfile names a path to an existing file that ends in
.work, workspace mode will be enabled. Any other value is an error.
If workspace mode is on,
-mod=readonly must be specified either implictly or explicitly. Otherwise, the
go command will return an error. If
-mod is not explicitly set and
go.work file is found,
-mod=readonly is set. (That is, it takes precedence over the existence of a vendor/module.txt which would normally imply
If workspace mode is on, the
go.work file (either named by
-workfile or the nearest one found when
auto) will be parsed to determine the three parameters for workspace mode: a Go version, a list of directories, and a list of replacements.
If workspace mode is on, the selected workspace file will show up in the
go env variable
GOWORK. When not in workspace mode,
GOWORK will be
The following is an example of a valid
go 1.17 directory ( ./baz // foo.org/bar/baz ./tools // golang.org/x/tools ) replace golang.org/x/net => example.com/fork/net v1.4.5
go.work file will have a similar syntax as the
go.mod file. Restrictions in
go.mod lexical elements still apply to the
go.work file has three directives: the
go directive, the
directory directive, and the
go.work file requires a
go directive. The
go directive accepts a version just as it does in a
go.mod file. The
go directive is used to allow adding new semantics to the
go.work files without breaking previous users. It does not override go versions in invididual modules.
directory directive takes an absolute or relative path to a directory containing a
go.mod file as an argument. The syntax of the path is the same as directory replacements in
replace directives. The path must be to a module directory containing a
go.mod file. The
go.work file must contain at least one
directory directive. The
go command may optionally edit the comments on the
directory directive when doing any operation in workspace mode to add the module path from the directory's
Note that the
directory directive has no restriction on where the directory is located: module directories listed in
go.work file can be located outside the directory the
go.work file itself is in.
directory ( ./tools // golang.org/x/tools ./mod // golang.org/x/mod )
Each directory listed (in this example
./mod) refers to a single module: the module specified by the
go.mod file in that directory. It does not refer to any other modules specified by
go.mod files in subdirectories of that directory.
The modules specified by
directory directives in the
go.work file are the workspace modules. The workspace modules will collectively be the main modules when doing a build in workspace mode. These modules are always selected by MVS with the version
"", and their
exclude directives are applied.
replace directive has the same syntax and semantics as the replace directive in a
replace ( golang.org/x/tools => ../tools golang.org/x/mod v0.4.1 => example.com/mymod v0.5 )
replace directives in the
go.work are applied in addition to and with higher precedence than
replaces in the workspace modules. A
replace directive in the
go.work file overrides replace directives in workspace modules applying to the same module or module version. If two or more workspace modules replace the same module or module version with different module versions or directories, and there is not an overriding
replace in the
go.work file, the
go command will report an error. The
go command will report errors for replacements of workspace modules that don't refer to the same directory as the workspace module. If any of those exist in a workspace module replacing another workspace module, the user will have to explicitly replace that workspace module with its path on disk.
If workspace mode is on and the
go.work file has valid syntax, the Go version provided by the
go.work file is used to control the exact behavior of workspace mode. For the first version of Go supporting workspace mode and unless changes are made in following versions the following semantics apply:
When doing a build operation under workspace mode the
go command will try to find a
go.mod file. If a
go.mod file is found, its containing directory must be declared with a
directory directive in the
go.work file. Because the build list is determined by the workspace rather than a
go.mod file, outside of a module, the
go command will proceed as normal to build any non-relative package paths or patterns. Outside of a module, a package composed of
.go files listed on the command line resolves its imports according to the workspace, and the package‘s imports will be resolved according to the workspace’s build list.
all pattern in workspace mode resolves to the union of
all for over the set of workspace modules.
all is the set of packages needed to build and test packages in the workspace modules.
To construct the build list, each of the workspace modules are main modules and are selected by MVS and their
exclude directives will be applied.
replace directives in the
go.work file override the
replaces in the workspace modules. Similar to a single main module in module mode, each of the main modules will have version
"", but MVS will traverse other versions of the main modules that are depended on by transitive module dependencies. For the purposes of lazy loading, we load the explicit dependencies of each workspace module when doing the deepening scan.
Module vendor directories are ignored in workspace mode because of the requirement of
Two new subcommands will be added to go mod:
go mod initwork and
go mod editwork.
go mod initwork will take as arguments a (potentially empty) list of directories it will use to write out a
go.work file in the working directory with a
go statement and a
directory statement listing each of the directories.
go mod initwork will take an optional
-o flag to specify a different output file path, which can be used to create workspace files for other configurations.
go mod editwork will work similarly to
go mod edit and take the following flags:
-fmtwill reformat the
-go=versionwill set the file's
-dropdirectory=pathwill add and drop a directory directive for the given path
-dropreplacewill work exactly as they do for
go mod edit
This proposal addresses these workflows among others:
One common workflow is when a user wants to add a feature in an upstream module and make use of the feature in their own module. Currently, they might open the two modules in their editor through gopls, which will create a supermodule requiring and replacing both of the modules, and creating a single build list used for both of the modules. The editor tooling and builds done through the editor will use that build list, but the user will not have access to the ‘supermodule’ outside their editor: go command invocations run in their terminal outside the editor will use a different build list. The user can change their go.mod to add a replace, which will be reflected in both the editor and their go command invocations, but this is a change they will need to remember to revert before submitting.
When these changes are done often, for example because a project's code base is split among several modules, a user might want to have a consistent configuration used to join the modules together. In that case the user will want to configure their editor and the
go command to always use a single build list when working in those modules. One way to do this is to work in a top level module that transitively requires the others, if it exists, and replace the dependencies. But they then need to remember to not check in the replace and always need to run their go commands from that designated module.
As an example, the
gopls code base in
golang.org/x/tools/internal/lsp might want to add a new function to
golang.org/x/mod/modfile package and start using it. If the user has the
golang.org/x/tools repos in the same directory they might run:
go mod initwork ./mod ./tools
which will produce this file:
go 1.17 directory ( ./mod // golang.org/x/mod ./tools // golang.org/x/tools )
Then they could work on the new function in
golang.org/x/mod/modfile and its usage in
golang.org/x/tools/internal/lsp and when run from any directory in the workspace the
go command would present a consistent build list. When they were satisfied with their change, they could release a new version of
go.mod to require the new vesion of
golang.org/x/mod, and then turn off workspace mode with
-workfile=off to make sure the change behaves as expected.
A further variant of the above is a module that depends on another module in the same repository. In this case checking in go.mod files that require and replace each other is not as much of a problem, but especially as the number of modules grows keeping them in sync becomes more difficult. If a user wants to keep the same build list as they move between directories so that they can continue to test against the same configuration, they will need to make sure all the modules replace each other, which is error prone. It would be far more convenient to have a single configuration linking all the modules together. Of course, this use case has the additional problem of updating the requirements on the replaced modules in the repository. This is a case of the problem of updating version requirements on released modules which is out of scope for this proposal.
Our goal is that when there are several tightly coupled modules in the same repository, users would choose to create
go.work files defining the workspace using the modules in those repositories instead of adding
replaces in the
go.mod files. Perhaps the creation of the file can be automated by an external tool that scans for all the
go.mod files recursively contained in a directory. These
go.work files should not be checked into the repositories so that they don‘t override the workspaces users explicitly define. Checking in
go.work files could also lead to CI/CD systems not testing the actual set of version requirements on a module and that version requirements among the repository’s modules are properly incremented to use changes in the modules. And of course, if a repository contains only a single module, or unrelated modules, there's not much utility to adding a
go.work file because each user may have a different directory structure on their computer outside of that repository.
As a simple example the
gopls binary is in the module
golang.org/x/tools/gopls which depends on other packages in the
golang.org/x/tools module. Currently, building and testing the top level
gopls code is done by entering the directory of the
golang.org/x/tools/gopls module which replaces its usage of the
module golang.org/x/tools/gopls go 1.12 require ( ... golang.org/x/tools v0.1.0 ... ) replace golang.org/x/tools => ../
replace can be removed and replaced with a
go.work file that includes both modules in the directory above the checkout of the
// golang.org/x/tools/go.work go 1.17 directory ( ./tools ./tools/gopls )
This allows any of the tests in either module to be run from anywhere in the repo. Of course, to release the modules, the
golang.org/x/tools module needs to be tagged and released, and then the
golang.org/x/gopls module needs to require that new release.
Users might want to easily be able to test their modules with different configurations of dependencies. For instance, they might want to test their module using the development versions of the dependencies, using the build list determined using the module as a single main module, and using a build list with alternate versions of dependencies that are commonly used. By making a workspace with the development versions of the dependencies and another adding the alternative versions of the dependencies with replaces, it's easy to switch between the three configurations.
Users who want to test using a subset of the workspace modules can also easily comment out some of the directory directives in their workspace file instead of making separate workspace files with the appropriate subset of workspace modules, if that works better for their workflows.
With this change, users will be able to configure
gopls to use
go.work files describing their workspace.
gopls can pass the workspace to the
go command in its invocations if it's running a version of Go that supports workspaces, or can easily rewrite the workspace file into a supermodule for earlier versions. The semantics of workspace mode are not quite the same as for a supermodule in general (for instance
all have different meanings) but are the same or close enough for the cases that matter.
While this proposal does not aim to completely recreate all
GOPATH workflows, it can be used to create a setup that shares some aspects of the
GOPATH setup: A user who is working with a set of modules in
GOPATH, but in
GOPATH mode so that all dependencies are resolved from the
GOPATH tree can add a
go.work file to the base of a
GOPATH directory that lists all the modules in that
GOPATH (and even those in other
GOPATH directories, if their path has multiple elements). Then all their dependencies that are under that
GOPATH directory will continue to be resolved from those locations.
Of course there are caveats to this workflow:
GOPATH packages that are not contained in a module can't be added to the workspace, and the
go.work file needs to be manually maintained to add modules instead of walking a directory tree like
GOPATH mode does. And opting into workspace mode piecemeal by adding modules one by one can be frustrating because the modules outside of the new workspace will require
-modfile to be set to
off or another
go.work file that includes it. But even with these differences, used this way,
go.work can recreate some of the convenience of
GOPATH while still providing the benefits of modules.
One alternative that was considered for disabling module mode would be to have module mode be an option for the
-mod=work would be the default and users could set any other value to turn off workspace mode. This removes the redundant knob that exists in this proposal where workspace mode is set independently of the
-mod flag, but only
-mod=readonly is allowed. The reason this alternative was adopted for this proposal is that it could be unintuitive and hard for users to remember to set
-mod=readonly to turn workspace mode off. Users might think to set
-mod=mod to turn workspace mode off even though they don't intend to modify their
This also avoids conflicting defaults: the existence of a
go.work file implies workspace mode, but the existence of
-mod=vendor. Separating the configurations makes it clear that the
go.work file takes precedence.
But regardless of the above, it‘s useful to have a way to specify the path to a different
go.work file similar to the
-modfile flag for the same reasons that
-modfile exists. Given that
-workfile exists it’s natural to add a
-workfile=off option to turn off workspace mode.
The configuration of multi-module workspaces is put in a file rather than being passed through an environment variable or flag because there are multiple parameters for configuration that would be difficult to put into a single flag or environment variable and unwieldy to put into multiple.
go command locates
go.work files the same way it locates
go.mod files to make it easy for users already familiar with modules to learn the rules for whether their current directory is in a workspace and which one.
go.work files allow users to operate in directories outside of any modules but still use the workspace build list. This makes it easy for users to have a
GOPATH-like user experience by placing a
go.work file in their home directory linking their modules together.
go.mod file, we want the format of the configuration for multi-module workspaces to be machine writable and human readable. Though there are other popular configuration formats such as yaml and json, they can often be confusing or annoying to write. The format used by the
go.mod file is already familar to Go programmers, and is easy for both humans and computers to read and write.
Modules are listed by the directory containing the module‘s
go.mod file rather than listing the paths to the
go.mod files themselves to avoid the redundant basename in every path. Alternatively, if the
go.mod files were listed directly it would be more clear that directories aren’t being searched for all modules contained under them but rather refer to a single module. Modules are required to be listed explicitly instead of allowing for patterns that match all modules under a directory because those entries would require slow directory walks each time the
go command would need to load a workspace. Because a module's path is not always clear from its directory name, we will allow the go command add comments on the
directory directive with the module path.
Requiring the directories listed in the
go.work file to have
go.mod files means that projects without
go.mod files can‘t be added to a workspace even though they can be required as implicit modules in
go.mod files. To support these we would have to add to the
go.work file some way of associating the directories with
go.mod files. But these projects are already getting more rare and the missing
go.mod can be worked around by adding a temporary
go.mod file to the project’s directory.
The naming of the
replace directives is straightforward: they are the same as in
directory directive is called
directory because that is its argument. Using
module to list the module directories could be confusing because there is already a module directive in
go.mod that has a different meaning. On the other hand, names like
moddir are awkward.
go.work files should not be checked into version control repos containing modules so that the
go.work file in a module does not end up overriding the configuration a user created themselves outside of the module. The
go.work documentation should contain clear warnings about this.
A single build list is constructed from the set of workspace modules to give developers consistent results wherever they are in their workspace. Further, the single build list allows tooling to present a consistent view of the workspace, so that editor operations and information doesn't change in surprising ways when moving between files.
replace directives are respected when building the build list because many modules already have many
replaces in them that are necessary to properly build them. Not respecting them would break users unnessesarily.
replace directives exist in the workspace file to allow for resolving conflicts between
replaces in workspace modules. Because all workspace modules exist as co-equals in the workspace, there is no clear and intuitive way to resolve
replace conflicts without explicit input from the user. One alternative is to add special syntax for overriding replaces to make the overriding behavior more explicit, and an additional option is to add an option to add syntax to nullify replaces without overriding them.
Working in modules not listed in the workspace file is disallowed to avoid what could become a common source of confusion: if the
go command stayed in workspace mode, it's possible that a command line query could resolve to a different version of the module the directory contains. Users could be confused about a
go build or
go list command completing successfully but not respecting changes made in the current module. On the other hand, a user could be confused about the go command implicitly ignoring the workspace if they intended the current module to be in the workspace. It is better to make the situation clear to the user to allow them either to add the current module to the workspace or explicitly turn workspace mode off according to their preference.
Module vendoring is ignored in workspace mode because it is not clear which modules' vendor directories should be respected if there are multiple workpace modules with vendor directories containing the same dependencies. Worse, if module A vendors example.com/foo/pkg@A and module B vendors email@example.com, then a workspace that combines A and B would select example.com/foo v0.2.0 in the overall build list, but would not have any vendored copy of example.com/foo/pkg for that version. As the modules spec says, “Vendoring may be used to allow interoperation with older versions of Go, or to ensure that all files used for a build are stored in a single file tree.”. Because developers in workspace mode are necessarily not using an older version of Go, and the build list used by the workspace is different than that used in the module, vendoring is not as useful for workspaces as it is for individual modules.
go command will use the collective set of
go.sum files that exist across the workspace modules to verify dependency modules, but there are cases where the
go.sum files in the workspace modules collectively do not contain all sums needed to verify the build: The simpler case is if the workspace go.mod files themselves are incomplete, the
go command will add missing sums to the workspace‘s
go.work.sum file rather than to the module’s
go.sum. But even if all workspace
go.sum files are complete, they may still not contain all necessary sums:
If the workspace includes modules
Ximports a package from
Yhas a transitive requirement on
firstname.lastname@example.org(but does not import any packages from it), then
X/go.sumwill contain a checksum only for
Ywill contain a checksum only for
v1.1.0/go.sum. No individual module will have a checksum for the source code for
v1.1.0, because no module in isolation actually uses that source code.
go mod initwork and
go mod editwork subcommands are being added for the same reasons that the go
go mod init and
go mod edit commands exist: they make it more convenient to create and edit
go.work files. The names are awkward, but it's not clear that it would be worth making the commands named
go work init and
go work edit if
go work would only have two subcommands.
Tools based on the go command, either directly through
go list or via
golang.org/x/tools/go/packages will work without changes with workspaces.
This change does not affect the Go language or its core libraries. But we would like to maintain the semantics of a
go.work file across versions of Go to avoid causing unnecessary churn and surprise for users.
This is why all valid
go.work files provide a Go version. Newer versions of Go will continue to respect the workspace semantics of the version of Go listed in the
go.work file. This will make it possible (if necessary) to make changes in the of workspace files in future versions of Go for users who create new workspaces or explicitly increase the Go version of their
The implementation for this would all be in the
go command. It would need to be able to read
go.work files, which we could easily implement reusing parts of the
go.mod parser. We would need to add the new
-workfile flag to the Go command and modify the
go command to look for the
go.work file to determine if it's in workspace mode. The most substantial part of the implementation would be to modify the module loader to be able to accept multiple main modules rather than a single main module, and run MVS with the multiple main modules when it is in workspace mode.
To avoid issues with the release cycle, if the implementation is not finished before a release, the behavior to look for a
go.work file and to turn on workspace mode can be guarded behind a
GOEXPERIMENT. Without the experiment turned on it will be possible to work on the implementation even if it can‘t be completed in time because it will never be active in the release. We could also set the
-workfile flag’s default to
off in the first version and change it to its automatic behavior later.
Issue #32394 is about
gopls' support for multi-module workspaces.
gopls currently allows users to provide a “workspace root” which is a directory it searches for
go.mod files to build a supermodule from. Alternatively, users can create a
gopls.mod file in their workspace root that
gopls will use as its supermodule. This proposal creates a concept of a workspace that is similar to that
gopls that is understood by the
go command so that users can have a consistent configuration across their editor and direct invocations of the
Issue #44347 proposes adding a
GOTINKER mode to the
go command. Under the proposal, if
GOTINKER is set to a directory, the
go command will resolve import paths and dependencies in modules by looking first in a
GOPATH-structured tree under the
GOTINKER directory before looking at the module cache. This would allow users who want to have a
GOPATH like workflow to build a
GOTINKER, but still resolve most of their dependencies (those not in the
GOTINKER tree) using the standard module resolution system. It also provides for a multi-module workflow for users who put their modules under
GOTINKER and work in those modules.
This proposal also tries to provide some aspects of the
GOPATH workflow and to help with multi-module workflows. A user could put the modules that they would put under
GOTINKER in that proposal into their
go.work files to get a similar experience to the one they'd get under the
GOTINKER proposal. A major difference between the proposals is that in
GOTINKER modules would be found by their paths under the
GOTINKER tree instead of being explicitly listed in the
go.work file. But both proposals provide for a set of replaced module directories that take precedence over the module versions that would normally be resolved by MVS, when working in any of those modules.
The issue of maintaining user-specific replaces in
go.mod files was brought up in #26640. It proposes an alternative
go.mod.local file so that local changes to the go.mod file could be made adding replaces without needing to risk local changes being committed in
go.mod itself. The
go.work file provides users a place to put many of the local changes that would be put in the proposed
Issue #39005 proposes to add a mechanism to specify configurations for builds, such as build tags. This issue is similar in that it is a proposal for additional configuration outside the
go.mod file. This proposal does not advocate for adding this type of information to
go.work and is focused on making changes across multiple modules.
directory could lead people to believe that all modules under the directory are included rather than just one. It might be better to use another name. One alternative that has been suggested is
We might want to add a mechanism to ignore all replaces of a module or module version.
For example one module in the workspace could have
replace example.com/foo => example.com/foo v0.3.4 because v0.4.0 would be selected otherwise and they think it's broken. Another module in the workspace could have
require example.com/foo v0.5.0 which fixes the incompatibilities and also adds some features that are necessary.
In that case, the user might just want to knock the replacements away, but they might not want to remove the existing replacements for policy reasons (or because the replacement is actually in a separate repo).
go.work files that checked into repositories would cause confusion for Go users because they change the build configuration without the user explicitly opting in. Because of this they should be strongly discouraged. Though it's not clear that the Go tool should enforce this, other tools that vet repositories and releases should output warnings or errors for repositories containing
go.work files. There may also be other mechanisms not yet considered in this document to discourage checked-in
GOWORK can‘t be set by users because we don’t want there to be ambiguity about how to enter workspace mode, but an alternative could be to use an environment variable instead of the
-workfile flag to change the location of the workspace file. Note that with the proposal as is,
-workfile may be set in
GOFLAGS, and that may be persisted with
go env -w. Developers won't need to type it out every time.
If this proposal is accepted, before it is released the documentation should specify a set of patterns and anti-patterns and how to achieve certain workflows using workspaces. For instance, it should mention that single-module repositories should rarely contain
As mentioned above, this proposal does not try to solve the problem of versioning and releasing modules so that new versions of dependent modules depend on new versions of the dependency modules. A tool built in the future can use the current workspace as well as the set of dependencies in the module graph to automate this work.
Even though it's out of scope to update the dependencies between workspace modules because that requires a release, it might be useful to make dependency versions consistent. One idea could be to push the module versions of dependency modules back into the go.mod files of the dependency modules. But this could lead to confusion because while the dependency versions will be consistent, the dependencies between the workspace modules will still need to be updated separately.
While modules have a single file listing all their root dependencies, the set of workspaces' root dependencies is split among many files, and the same is true of the set of replaces. It may be helpful to add a command to list the effective set of root dependencies and replaces and which go.mod file each of them comes from.
Perhaps there could be a command named
go mod workstatus that gives an overview of the status of the modules in the workspace.