// Copyright 2015 The Go Authors.  All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// Benchstat computes and compares statistics about benchmarks.
//
// Usage:
//
//	benchstat [-delta-test name] [-geomean] [-html] old.txt [new.txt] [more.txt ...]
//
// Each input file should contain the concatenated output of a number
// of runs of ``go test -bench.'' For each different benchmark listed in an input file,
// benchstat computes the mean, minimum, and maximum run time,
// after removing outliers using the interquartile range rule.
//
// If invoked on a single input file, benchstat prints the per-benchmark statistics
// for that file.
//
// If invoked on a pair of input files, benchstat adds to the output a column
// showing the statistics from the second file and a column showing the
// percent change in mean from the first to the second file.
// Next to the percent change, benchstat shows the p-value and sample
// sizes from a test of the two distributions of benchmark times.
// Small p-values indicate that the two distributions are significantly different.
// If the test indicates that there was no significant change between the two
// benchmarks (defined as p > 0.05), benchstat displays a single ~ instead of
// the percent change.
//
// The -delta-test option controls which significance test is applied:
// utest (Mann-Whitney U-test), ttest (two-sample Welch t-test), or none.
// The default is the U-test, sometimes also referred to as the Wilcoxon rank
// sum test.
//
// If invoked on more than two input files, benchstat prints the per-benchmark
// statistics for all the files, showing one column of statistics for each file,
// with no column for percent change or statistical significance.
//
// The -html option causes benchstat to print the results as an HTML table.
//
// Example
//
// Suppose we collect benchmark results from running ``go test -bench=Encode''
// five times before and after a particular change.
//
// The file old.txt contains:
//
//	BenchmarkGobEncode   	100	  13552735 ns/op	  56.63 MB/s
//	BenchmarkJSONEncode  	 50	  32395067 ns/op	  59.90 MB/s
//	BenchmarkGobEncode   	100	  13553943 ns/op	  56.63 MB/s
//	BenchmarkJSONEncode  	 50	  32334214 ns/op	  60.01 MB/s
//	BenchmarkGobEncode   	100	  13606356 ns/op	  56.41 MB/s
//	BenchmarkJSONEncode  	 50	  31992891 ns/op	  60.65 MB/s
//	BenchmarkGobEncode   	100	  13683198 ns/op	  56.09 MB/s
//	BenchmarkJSONEncode  	 50	  31735022 ns/op	  61.15 MB/s
//
// The file new.txt contains:
//
//	BenchmarkGobEncode   	 100	  11773189 ns/op	  65.19 MB/s
//	BenchmarkJSONEncode  	  50	  32036529 ns/op	  60.57 MB/s
//	BenchmarkGobEncode   	 100	  11942588 ns/op	  64.27 MB/s
//	BenchmarkJSONEncode  	  50	  32156552 ns/op	  60.34 MB/s
//	BenchmarkGobEncode   	 100	  11786159 ns/op	  65.12 MB/s
//	BenchmarkJSONEncode  	  50	  31288355 ns/op	  62.02 MB/s
//	BenchmarkGobEncode   	 100	  11628583 ns/op	  66.00 MB/s
//	BenchmarkJSONEncode  	  50	  31559706 ns/op	  61.49 MB/s
//	BenchmarkGobEncode   	 100	  11815924 ns/op	  64.96 MB/s
//	BenchmarkJSONEncode  	  50	  31765634 ns/op	  61.09 MB/s
//
// The order of the lines in the file does not matter, except that the
// output lists benchmarks in order of appearance.
//
// If run with just one input file, benchstat summarizes that file:
//
//	$ benchstat old.txt
//	name        time/op
//	GobEncode   13.6ms ± 1%
//	JSONEncode  32.1ms ± 1%
//	$
//
// If run with two input files, benchstat summarizes and compares:
//
//	$ benchstat old.txt new.txt
//	name        old time/op  new time/op  delta
//	GobEncode   13.6ms ± 1%  11.8ms ± 1%  -13.31% (p=0.016 n=4+5)
//	JSONEncode  32.1ms ± 1%  31.8ms ± 1%     ~    (p=0.286 n=4+5)
//	$
//
// Note that the JSONEncode result is reported as
// statistically insignificant instead of a -0.93% delta.
//
package main

import (
	"bytes"
	"flag"
	"fmt"
	"html"
	"io/ioutil"
	"log"
	"os"
	"strings"
	"unicode/utf8"

	"golang.org/x/perf/internal/stats"
)

func usage() {
	fmt.Fprintf(os.Stderr, "usage: benchstat [options] old.txt [new.txt] [more.txt ...]\n")
	fmt.Fprintf(os.Stderr, "options:\n")
	flag.PrintDefaults()
	os.Exit(2)
}

var (
	flagDeltaTest = flag.String("delta-test", "utest", "significance `test` to apply to delta: utest, ttest, or none")
	flagAlpha     = flag.Float64("alpha", 0.05, "consider change significant if p < `α`")
	flagGeomean   = flag.Bool("geomean", false, "print the geometric mean of each file")
	flagHTML      = flag.Bool("html", false, "print results as an HTML table")
)

var deltaTestNames = map[string]DeltaTest{
	"none":   NoDeltaTest,
	"u":      UTest,
	"u-test": UTest,
	"utest":  UTest,
	"t":      TTest,
	"t-test": TTest,
	"ttest":  TTest,
}

type row struct {
	cols []string
}

func newRow(cols ...string) *row {
	return &row{cols: cols}
}

func (r *row) add(col string) {
	r.cols = append(r.cols, col)
}

func (r *row) trim() {
	for len(r.cols) > 0 && r.cols[len(r.cols)-1] == "" {
		r.cols = r.cols[:len(r.cols)-1]
	}
}

func main() {
	log.SetPrefix("benchstat: ")
	log.SetFlags(0)
	flag.Usage = usage
	flag.Parse()
	deltaTest := deltaTestNames[strings.ToLower(*flagDeltaTest)]
	if flag.NArg() < 1 || deltaTest == nil {
		flag.Usage()
	}

	// Read in benchmark data.
	c := new(Collection)
	for _, file := range flag.Args() {
		data, err := ioutil.ReadFile(file)
		if err != nil {
			log.Fatal(err)
		}
		c.AddConfig(file, data)
	}
	for _, m := range c.Metrics {
		m.computeStats()
	}

	var tables [][]*row
	switch len(c.Configs) {
	case 2:
		before, after := c.Configs[0], c.Configs[1]
		key := Key{}
		for _, key.Unit = range c.Units {
			var table []*row
			metric := metricOf(key.Unit)
			for _, key.Benchmark = range c.Benchmarks {
				key.Config = before
				old := c.Metrics[key]
				key.Config = after
				new := c.Metrics[key]
				if old == nil || new == nil {
					continue
				}
				if len(table) == 0 {
					table = append(table, newRow("name", "old "+metric, "new "+metric, "delta"))
				}

				pval, testerr := deltaTest(old, new)

				scaler := NewScaler(old.Mean, old.Unit)
				row := newRow(key.Benchmark, old.Format(scaler), new.Format(scaler), "~   ")
				if testerr != nil {
					row.add(fmt.Sprintf("(%s)", testerr))
				} else if pval < *flagAlpha {
					row.cols[3] = fmt.Sprintf("%+.2f%%", ((new.Mean/old.Mean)-1.0)*100.0)
				}
				if len(row.cols) == 4 && pval != -1 {
					row.add(fmt.Sprintf("(p=%0.3f n=%d+%d)", pval, len(old.RValues), len(new.RValues)))
				}
				table = append(table, row)
			}
			if len(table) > 0 {
				table = addGeomean(table, c, key.Unit, true)
				tables = append(tables, table)
			}
		}

	default:
		key := Key{}
		for _, key.Unit = range c.Units {
			var table []*row
			metric := metricOf(key.Unit)

			if len(c.Configs) > 1 {
				hdr := newRow("name \\ " + metric)
				for _, config := range c.Configs {
					hdr.add(config)
				}
				table = append(table, hdr)
			} else {
				table = append(table, newRow("name", metric))
			}

			for _, key.Benchmark = range c.Benchmarks {
				row := newRow(key.Benchmark)
				var scaler Scaler
				for _, key.Config = range c.Configs {
					m := c.Metrics[key]
					if m == nil {
						row.add("")
						continue
					}
					if scaler == nil {
						scaler = NewScaler(m.Mean, m.Unit)
					}
					row.add(m.Format(scaler))
				}
				row.trim()
				if len(row.cols) > 1 {
					table = append(table, row)
				}
			}
			table = addGeomean(table, c, key.Unit, false)
			tables = append(tables, table)
		}
	}

	numColumn := 0
	for _, table := range tables {
		for _, row := range table {
			if numColumn < len(row.cols) {
				numColumn = len(row.cols)
			}
		}
	}

	max := make([]int, numColumn)
	for _, table := range tables {
		for _, row := range table {
			for i, s := range row.cols {
				n := utf8.RuneCountInString(s)
				if max[i] < n {
					max[i] = n
				}
			}
		}
	}

	var buf bytes.Buffer
	for i, table := range tables {
		if i > 0 {
			fmt.Fprintf(&buf, "\n")
		}

		if *flagHTML {
			fmt.Fprintf(&buf, "<style>.benchstat tbody td:nth-child(1n+2) { text-align: right; padding: 0em 1em; }</style>\n")
			fmt.Fprintf(&buf, "<table class='benchstat'>\n")
			printRow := func(row *row, tag string) {
				fmt.Fprintf(&buf, "<tr>")
				for _, cell := range row.cols {
					fmt.Fprintf(&buf, "<%s>%s</%s>", tag, html.EscapeString(cell), tag)
				}
				fmt.Fprintf(&buf, "\n")
			}
			printRow(table[0], "th")
			for _, row := range table[1:] {
				printRow(row, "td")
			}
			fmt.Fprintf(&buf, "</table>\n")
			continue
		}

		// headings
		row := table[0]
		for i, s := range row.cols {
			switch i {
			case 0:
				fmt.Fprintf(&buf, "%-*s", max[i], s)
			default:
				fmt.Fprintf(&buf, "  %-*s", max[i], s)
			case len(row.cols) - 1:
				fmt.Fprintf(&buf, "  %s\n", s)
			}
		}

		// data
		for _, row := range table[1:] {
			for i, s := range row.cols {
				switch i {
				case 0:
					fmt.Fprintf(&buf, "%-*s", max[i], s)
				default:
					if i == len(row.cols)-1 && len(s) > 0 && s[0] == '(' {
						// Left-align p value.
						fmt.Fprintf(&buf, "  %s", s)
						break
					}
					fmt.Fprintf(&buf, "  %*s", max[i], s)
				}
			}
			fmt.Fprintf(&buf, "\n")
		}
	}

	os.Stdout.Write(buf.Bytes())
}

func addGeomean(table []*row, c *Collection, unit string, delta bool) []*row {
	if !*flagGeomean {
		return table
	}

	row := newRow("[Geo mean]")
	key := Key{Unit: unit}
	geomeans := []float64{}
	for _, key.Config = range c.Configs {
		var means []float64
		for _, key.Benchmark = range c.Benchmarks {
			m := c.Metrics[key]
			if m != nil {
				means = append(means, m.Mean)
			}
		}
		if len(means) == 0 {
			row.add("")
			delta = false
		} else {
			geomean := stats.GeoMean(means)
			geomeans = append(geomeans, geomean)
			row.add(NewScaler(geomean, unit)(geomean) + "     ")
		}
	}
	if delta {
		row.add(fmt.Sprintf("%+.2f%%", ((geomeans[1]/geomeans[0])-1.0)*100.0))
	}
	return append(table, row)
}

func metricOf(unit string) string {
	switch unit {
	case "ns/op":
		return "time/op"
	case "B/op":
		return "alloc/op"
	case "MB/s":
		return "speed"
	default:
		return unit
	}
}