// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

package runtime

import (
	"internal/cpu"
	"runtime/internal/atomic"
	"runtime/internal/sys"
	"unsafe"
)

// defined constants
const (
	// G status
	//
	// Beyond indicating the general state of a G, the G status
	// acts like a lock on the goroutine's stack (and hence its
	// ability to execute user code).
	//
	// If you add to this list, add to the list
	// of "okay during garbage collection" status
	// in mgcmark.go too.
	//
	// TODO(austin): The _Gscan bit could be much lighter-weight.
	// For example, we could choose not to run _Gscanrunnable
	// goroutines found in the run queue, rather than CAS-looping
	// until they become _Grunnable. And transitions like
	// _Gscanwaiting -> _Gscanrunnable are actually okay because
	// they don't affect stack ownership.

	// _Gidle means this goroutine was just allocated and has not
	// yet been initialized.
	_Gidle = iota // 0

	// _Grunnable means this goroutine is on a run queue. It is
	// not currently executing user code. The stack is not owned.
	_Grunnable // 1

	// _Grunning means this goroutine may execute user code. The
	// stack is owned by this goroutine. It is not on a run queue.
	// It is assigned an M and a P (g.m and g.m.p are valid).
	_Grunning // 2

	// _Gsyscall means this goroutine is executing a system call.
	// It is not executing user code. The stack is owned by this
	// goroutine. It is not on a run queue. It is assigned an M.
	_Gsyscall // 3

	// _Gwaiting means this goroutine is blocked in the runtime.
	// It is not executing user code. It is not on a run queue,
	// but should be recorded somewhere (e.g., a channel wait
	// queue) so it can be ready()d when necessary. The stack is
	// not owned *except* that a channel operation may read or
	// write parts of the stack under the appropriate channel
	// lock. Otherwise, it is not safe to access the stack after a
	// goroutine enters _Gwaiting (e.g., it may get moved).
	_Gwaiting // 4

	// _Gmoribund_unused is currently unused, but hardcoded in gdb
	// scripts.
	_Gmoribund_unused // 5

	// _Gdead means this goroutine is currently unused. It may be
	// just exited, on a free list, or just being initialized. It
	// is not executing user code. It may or may not have a stack
	// allocated. The G and its stack (if any) are owned by the M
	// that is exiting the G or that obtained the G from the free
	// list.
	_Gdead // 6

	// _Genqueue_unused is currently unused.
	_Genqueue_unused // 7

	// _Gcopystack means this goroutine's stack is being moved. It
	// is not executing user code and is not on a run queue. The
	// stack is owned by the goroutine that put it in _Gcopystack.
	_Gcopystack // 8

	// _Gpreempted means this goroutine stopped itself for a
	// suspendG preemption. It is like _Gwaiting, but nothing is
	// yet responsible for ready()ing it. Some suspendG must CAS
	// the status to _Gwaiting to take responsibility for
	// ready()ing this G.
	_Gpreempted // 9

	// _Gexitingsyscall means this goroutine is exiting from a
	// system call. This is like _Gsyscall, but the GC should not
	// scan its stack. Currently this is only used in exitsyscall0
	// as a transient state when it drops the G.
	_Gexitingsyscall // 10

	// _Gscan combined with one of the above states other than
	// _Grunning indicates that GC is scanning the stack. The
	// goroutine is not executing user code and the stack is owned
	// by the goroutine that set the _Gscan bit.
	//
	// _Gscanrunning is different: it is used to briefly block
	// state transitions while GC signals the G to scan its own
	// stack. This is otherwise like _Grunning.
	//
	// atomicstatus&~Gscan gives the state the goroutine will
	// return to when the scan completes.
	_Gscan          = 0x1000
	_Gscanrunnable  = _Gscan + _Grunnable  // 0x1001
	_Gscanrunning   = _Gscan + _Grunning   // 0x1002
	_Gscansyscall   = _Gscan + _Gsyscall   // 0x1003
	_Gscanwaiting   = _Gscan + _Gwaiting   // 0x1004
	_Gscanpreempted = _Gscan + _Gpreempted // 0x1009
)

const (
	// P status

	// _Pidle means a P is not being used to run user code or the
	// scheduler. Typically, it's on the idle P list and available
	// to the scheduler, but it may just be transitioning between
	// other states.
	//
	// The P is owned by the idle list or by whatever is
	// transitioning its state. Its run queue is empty.
	_Pidle = iota

	// _Prunning means a P is owned by an M and is being used to
	// run user code or the scheduler. Only the M that owns this P
	// is allowed to change the P's status from _Prunning. The M
	// may transition the P to _Pidle (if it has no more work to
	// do), _Psyscall (when entering a syscall), or _Pgcstop (to
	// halt for the GC). The M may also hand ownership of the P
	// off directly to another M (e.g., to schedule a locked G).
	_Prunning

	// _Psyscall means a P is not running user code. It has
	// affinity to an M in a syscall but is not owned by it and
	// may be stolen by another M. This is similar to _Pidle but
	// uses lightweight transitions and maintains M affinity.
	//
	// Leaving _Psyscall must be done with a CAS, either to steal
	// or retake the P. Note that there's an ABA hazard: even if
	// an M successfully CASes its original P back to _Prunning
	// after a syscall, it must understand the P may have been
	// used by another M in the interim.
	_Psyscall

	// _Pgcstop means a P is halted for STW and owned by the M
	// that stopped the world. The M that stopped the world
	// continues to use its P, even in _Pgcstop. Transitioning
	// from _Prunning to _Pgcstop causes an M to release its P and
	// park.
	//
	// The P retains its run queue and startTheWorld will restart
	// the scheduler on Ps with non-empty run queues.
	_Pgcstop

	// _Pdead means a P is no longer used (GOMAXPROCS shrank). We
	// reuse Ps if GOMAXPROCS increases. A dead P is mostly
	// stripped of its resources, though a few things remain
	// (e.g., trace buffers).
	_Pdead
)

// Mutual exclusion locks.  In the uncontended case,
// as fast as spin locks (just a few user-level instructions),
// but on the contention path they sleep in the kernel.
// A zeroed Mutex is unlocked (no need to initialize each lock).
type mutex struct {
	// Futex-based impl treats it as uint32 key,
	// while sema-based impl as M* waitm.
	// Used to be a union, but unions break precise GC.
	key uintptr
}

// sleep and wakeup on one-time events.
// before any calls to notesleep or notewakeup,
// must call noteclear to initialize the Note.
// then, exactly one thread can call notesleep
// and exactly one thread can call notewakeup (once).
// once notewakeup has been called, the notesleep
// will return.  future notesleep will return immediately.
// subsequent noteclear must be called only after
// previous notesleep has returned, e.g. it's disallowed
// to call noteclear straight after notewakeup.
//
// notetsleep is like notesleep but wakes up after
// a given number of nanoseconds even if the event
// has not yet happened.  if a goroutine uses notetsleep to
// wake up early, it must wait to call noteclear until it
// can be sure that no other goroutine is calling
// notewakeup.
//
// notesleep/notetsleep are generally called on g0,
// notetsleepg is similar to notetsleep but is called on user g.
type note struct {
	// Futex-based impl treats it as uint32 key,
	// while sema-based impl as M* waitm.
	// Used to be a union, but unions break precise GC.
	key uintptr
}

type funcval struct {
	fn uintptr
	// variable-size, fn-specific data here
}

// The representation of a non-empty interface.
// See comment in iface.go for more details on this struct.
type iface struct {
	tab  unsafe.Pointer
	data unsafe.Pointer
}

// The representation of an empty interface.
// See comment in iface.go for more details on this struct.
type eface struct {
	_type *_type
	data  unsafe.Pointer
}

func efaceOf(ep *interface{}) *eface {
	return (*eface)(unsafe.Pointer(ep))
}

// The guintptr, muintptr, and puintptr are all used to bypass write barriers.
// It is particularly important to avoid write barriers when the current P has
// been released, because the GC thinks the world is stopped, and an
// unexpected write barrier would not be synchronized with the GC,
// which can lead to a half-executed write barrier that has marked the object
// but not queued it. If the GC skips the object and completes before the
// queuing can occur, it will incorrectly free the object.
//
// We tried using special assignment functions invoked only when not
// holding a running P, but then some updates to a particular memory
// word went through write barriers and some did not. This breaks the
// write barrier shadow checking mode, and it is also scary: better to have
// a word that is completely ignored by the GC than to have one for which
// only a few updates are ignored.
//
// Gs and Ps are always reachable via true pointers in the
// allgs and allp lists or (during allocation before they reach those lists)
// from stack variables.
//
// Ms are always reachable via true pointers either from allm or
// freem. Unlike Gs and Ps we do free Ms, so it's important that
// nothing ever hold an muintptr across a safe point.

// A guintptr holds a goroutine pointer, but typed as a uintptr
// to bypass write barriers. It is used in the Gobuf goroutine state
// and in scheduling lists that are manipulated without a P.
//
// The Gobuf.g goroutine pointer is almost always updated by assembly code.
// In one of the few places it is updated by Go code - func save - it must be
// treated as a uintptr to avoid a write barrier being emitted at a bad time.
// Instead of figuring out how to emit the write barriers missing in the
// assembly manipulation, we change the type of the field to uintptr,
// so that it does not require write barriers at all.
//
// Goroutine structs are published in the allg list and never freed.
// That will keep the goroutine structs from being collected.
// There is never a time that Gobuf.g's contain the only references
// to a goroutine: the publishing of the goroutine in allg comes first.
// Goroutine pointers are also kept in non-GC-visible places like TLS,
// so I can't see them ever moving. If we did want to start moving data
// in the GC, we'd need to allocate the goroutine structs from an
// alternate arena. Using guintptr doesn't make that problem any worse.
type guintptr uintptr

//go:nosplit
func (gp guintptr) ptr() *g { return (*g)(unsafe.Pointer(gp)) }

//go:nosplit
func (gp *guintptr) set(g *g) { *gp = guintptr(unsafe.Pointer(g)) }

//go:nosplit
func (gp *guintptr) cas(old, new guintptr) bool {
	return atomic.Casuintptr((*uintptr)(unsafe.Pointer(gp)), uintptr(old), uintptr(new))
}

// setGNoWB performs *gp = new without a write barrier.
// For times when it's impractical to use a guintptr.
//go:nosplit
//go:nowritebarrier
func setGNoWB(gp **g, new *g) {
	(*guintptr)(unsafe.Pointer(gp)).set(new)
}

type puintptr uintptr

//go:nosplit
func (pp puintptr) ptr() *p { return (*p)(unsafe.Pointer(pp)) }

//go:nosplit
func (pp *puintptr) set(p *p) { *pp = puintptr(unsafe.Pointer(p)) }

// muintptr is a *m that is not tracked by the garbage collector.
//
// Because we do free Ms, there are some additional constrains on
// muintptrs:
//
// 1. Never hold an muintptr locally across a safe point.
//
// 2. Any muintptr in the heap must be owned by the M itself so it can
//    ensure it is not in use when the last true *m is released.
type muintptr uintptr

//go:nosplit
func (mp muintptr) ptr() *m { return (*m)(unsafe.Pointer(mp)) }

//go:nosplit
func (mp *muintptr) set(m *m) { *mp = muintptr(unsafe.Pointer(m)) }

// setMNoWB performs *mp = new without a write barrier.
// For times when it's impractical to use an muintptr.
//go:nosplit
//go:nowritebarrier
func setMNoWB(mp **m, new *m) {
	(*muintptr)(unsafe.Pointer(mp)).set(new)
}

// sudog represents a g in a wait list, such as for sending/receiving
// on a channel.
//
// sudog is necessary because the g ↔ synchronization object relation
// is many-to-many. A g can be on many wait lists, so there may be
// many sudogs for one g; and many gs may be waiting on the same
// synchronization object, so there may be many sudogs for one object.
//
// sudogs are allocated from a special pool. Use acquireSudog and
// releaseSudog to allocate and free them.
type sudog struct {
	// The following fields are protected by the hchan.lock of the
	// channel this sudog is blocking on. shrinkstack depends on
	// this for sudogs involved in channel ops.

	g *g

	// isSelect indicates g is participating in a select, so
	// g.selectDone must be CAS'd to win the wake-up race.
	isSelect bool
	next     *sudog
	prev     *sudog
	elem     unsafe.Pointer // data element (may point to stack)

	// The following fields are never accessed concurrently.
	// For channels, waitlink is only accessed by g.
	// For semaphores, all fields (including the ones above)
	// are only accessed when holding a semaRoot lock.

	acquiretime int64
	releasetime int64
	ticket      uint32
	parent      *sudog // semaRoot binary tree
	waitlink    *sudog // g.waiting list or semaRoot
	waittail    *sudog // semaRoot
	c           *hchan // channel
}

/*
Not used by gccgo.

type libcall struct {
	fn   uintptr
	n    uintptr // number of parameters
	args uintptr // parameters
	r1   uintptr // return values
	r2   uintptr
	err  uintptr // error number
}

*/

/*
Not used by gccgo.

// describes how to handle callback
type wincallbackcontext struct {
	gobody       unsafe.Pointer // go function to call
	argsize      uintptr        // callback arguments size (in bytes)
	restorestack uintptr        // adjust stack on return by (in bytes) (386 only)
	cleanstack   bool
}
*/

/*
Not used by gccgo.

// Stack describes a Go execution stack.
// The bounds of the stack are exactly [lo, hi),
// with no implicit data structures on either side.
type stack struct {
	lo uintptr
	hi uintptr
}
*/

type g struct {
	// Stack parameters.
	// stack describes the actual stack memory: [stack.lo, stack.hi).
	// stackguard0 is the stack pointer compared in the Go stack growth prologue.
	// It is stack.lo+StackGuard normally, but can be StackPreempt to trigger a preemption.
	// stackguard1 is the stack pointer compared in the C stack growth prologue.
	// It is stack.lo+StackGuard on g0 and gsignal stacks.
	// It is ~0 on other goroutine stacks, to trigger a call to morestackc (and crash).
	// Not for gccgo: stack       stack   // offset known to runtime/cgo
	// Not for gccgo: stackguard0 uintptr // offset known to liblink
	// Not for gccgo: stackguard1 uintptr // offset known to liblink

	_panic *_panic // innermost panic - offset known to liblink
	_defer *_defer // innermost defer
	m      *m      // current m; offset known to arm liblink
	// Not for gccgo: sched          gobuf
	syscallsp uintptr // if status==Gsyscall, syscallsp = sched.sp to use during gc
	syscallpc uintptr // if status==Gsyscall, syscallpc = sched.pc to use during gc
	// Not for gccgo: stktopsp       uintptr        // expected sp at top of stack, to check in traceback
	param        unsafe.Pointer // passed parameter on wakeup
	atomicstatus uint32
	// Not for gccgo: stackLock      uint32 // sigprof/scang lock; TODO: fold in to atomicstatus
	goid        int64
	schedlink   guintptr
	waitsince   int64      // approx time when the g become blocked
	waitreason  waitReason // if status==Gwaiting
	preempt     bool       // preemption signal, duplicates stackguard0 = stackpreempt
	preemptStop bool       // transition to _Gpreempted on preemption; otherwise, just deschedule
	// Not for gccgo: preemptShrink bool // shrink stack at synchronous safe point
	// asyncSafePoint is set if g is stopped at an asynchronous
	// safe point. This means there are frames on the stack
	// without precise pointer information.
	asyncSafePoint bool

	paniconfault bool // panic (instead of crash) on unexpected fault address
	preemptscan  bool // preempted g does scan for gc
	gcscandone   bool // g has scanned stack; protected by _Gscan bit in status
	throwsplit   bool // must not split stack

	gcScannedSyscallStack bool // gccgo specific; see scanSyscallStack

	// activeStackChans indicates that there are unlocked channels
	// pointing into this goroutine's stack. If true, stack
	// copying needs to acquire channel locks to protect these
	// areas of the stack.
	activeStackChans bool

	raceignore     int8     // ignore race detection events
	sysblocktraced bool     // StartTrace has emitted EvGoInSyscall about this goroutine
	sysexitticks   int64    // cputicks when syscall has returned (for tracing)
	traceseq       uint64   // trace event sequencer
	tracelastp     puintptr // last P emitted an event for this goroutine
	lockedm        muintptr
	sig            uint32
	writebuf       []byte
	sigcode0       uintptr
	sigcode1       uintptr
	sigpc          uintptr
	gopc           uintptr         // pc of go statement that created this goroutine
	ancestors      *[]ancestorInfo // ancestor information goroutine(s) that created this goroutine (only used if debug.tracebackancestors)
	startpc        uintptr         // pc of goroutine function
	// Not for gccgo: racectx        uintptr
	waiting *sudog // sudog structures this g is waiting on (that have a valid elem ptr); in lock order
	// Not for gccgo: cgoCtxt        []uintptr      // cgo traceback context
	labels     unsafe.Pointer // profiler labels
	timer      *timer         // cached timer for time.Sleep
	selectDone uint32         // are we participating in a select and did someone win the race?

	// Per-G GC state

	// gcAssistBytes is this G's GC assist credit in terms of
	// bytes allocated. If this is positive, then the G has credit
	// to allocate gcAssistBytes bytes without assisting. If this
	// is negative, then the G must correct this by performing
	// scan work. We track this in bytes to make it fast to update
	// and check for debt in the malloc hot path. The assist ratio
	// determines how this corresponds to scan work debt.
	gcAssistBytes int64

	// Remaining fields are specific to gccgo.

	exception unsafe.Pointer // current exception being thrown
	isforeign bool           // whether current exception is not from Go

	// When using split-stacks, these fields holds the results of
	// __splitstack_find while executing a syscall. These are used
	// by the garbage collector to scan the goroutine's stack.
	//
	// When not using split-stacks, g0 stacks are allocated by the
	// libc and other goroutine stacks are allocated by malg.
	// gcstack: unused (sometimes cleared)
	// gcstacksize: g0: 0; others: size of stack
	// gcnextsegment: unused
	// gcnextsp: current SP while executing a syscall
	// gcinitialsp: g0: top of stack; others: start of stack memory
	// gcnextsp2: current secondary stack pointer (if present)
	// gcinitialsp2: start of secondary stack (if present)
	gcstack       uintptr
	gcstacksize   uintptr
	gcnextsegment uintptr
	gcnextsp      uintptr
	gcinitialsp   unsafe.Pointer
	gcnextsp2     uintptr
	gcinitialsp2  unsafe.Pointer

	// gcregs holds the register values while executing a syscall.
	// This is set by getcontext and scanned by the garbage collector.
	gcregs g_ucontext_t

	entry    func(unsafe.Pointer) // goroutine function to run
	entryfn  uintptr              // function address passed to __go_go
	entrysp  uintptr              // the stack pointer of the outermost Go frame
	fromgogo bool                 // whether entered from gogo function

	scanningself bool // whether goroutine is scanning its own stack

	scang   uintptr // the g that wants to scan this g's stack (uintptr to avoid write barrier)
	scangcw uintptr // gc worker for scanning stack (uintptr to avoid write barrier)

	isSystemGoroutine    bool // whether goroutine is a "system" goroutine
	isFinalizerGoroutine bool // whether goroutine is the finalizer goroutine

	deferring          bool // whether we are running a deferred function
	goexiting          bool // whether we are running Goexit
	ranCgocallBackDone bool // whether we deferred CgocallBackDone

	traceback uintptr // stack traceback buffer

	context      g_ucontext_t // saved context for setcontext
	stackcontext [10]uintptr  // split-stack context
}

type m struct {
	g0 *g // goroutine with scheduling stack
	// Not for gccgo: morebuf gobuf  // gobuf arg to morestack
	// Not for gccgo: divmod  uint32 // div/mod denominator for arm - known to liblink

	// Fields not known to debuggers.
	procid  uint64 // for debuggers, but offset not hard-coded
	gsignal *g     // signal-handling g
	// Not for gccgo: goSigStack    gsignalStack // Go-allocated signal handling stack
	sigmask sigset // storage for saved signal mask
	// Not for gccgo: tls           [6]uintptr   // thread-local storage (for x86 extern register)
	mstartfn    func()
	curg        *g       // current running goroutine
	caughtsig   guintptr // goroutine running during fatal signal
	p           puintptr // attached p for executing go code (nil if not executing go code)
	nextp       puintptr
	oldp        puintptr // the p that was attached before executing a syscall
	id          int64
	mallocing   int32
	throwing    int32
	preemptoff  string // if != "", keep curg running on this m
	locks       int32
	softfloat   int32
	dying       int32
	profilehz   int32
	spinning    bool // m is out of work and is actively looking for work
	blocked     bool // m is blocked on a note
	newSigstack bool // minit on C thread called sigaltstack
	printlock   int8
	incgo       bool   // m is executing a cgo call
	freeWait    uint32 // if == 0, safe to free g0 and delete m (atomic)
	fastrand    [2]uint32
	needextram  bool
	traceback   uint8
	ncgocall    uint64 // number of cgo calls in total
	ncgo        int32  // number of cgo calls currently in progress
	// Not for gccgo: cgoCallersUse uint32      // if non-zero, cgoCallers in use temporarily
	// Not for gccgo: cgoCallers    *cgoCallers // cgo traceback if crashing in cgo call
	park          note
	alllink       *m // on allm
	schedlink     muintptr
	mcache        *mcache
	lockedg       guintptr
	createstack   [32]location // stack that created this thread.
	lockedExt     uint32       // tracking for external LockOSThread
	lockedInt     uint32       // tracking for internal lockOSThread
	nextwaitm     muintptr     // next m waiting for lock
	waitunlockf   func(*g, unsafe.Pointer) bool
	waitlock      unsafe.Pointer
	waittraceev   byte
	waittraceskip int
	startingtrace bool
	syscalltick   uint32
	freelink      *m // on sched.freem

	// these are here because they are too large to be on the stack
	// of low-level NOSPLIT functions.
	// Not for gccgo: libcall   libcall
	// Not for gccgo: libcallpc uintptr // for cpu profiler
	// Not for gccgo: libcallsp uintptr
	// Not for gccgo: libcallg  guintptr
	// Not for gccgo: syscall   libcall // stores syscall parameters on windows

	// preemptGen counts the number of completed preemption
	// signals. This is used to detect when a preemption is
	// requested, but fails. Accessed atomically.
	preemptGen uint32

	dlogPerM

	mOS

	// Remaining fields are specific to gccgo.

	gsignalstack     unsafe.Pointer // stack for gsignal
	gsignalstacksize uintptr

	dropextram bool // drop after call is done
	exiting    bool // thread is exiting

	scannote note // synchonization for signal-based stack scanning
}

type p struct {
	id          int32
	status      uint32 // one of pidle/prunning/...
	link        puintptr
	schedtick   uint32     // incremented on every scheduler call
	syscalltick uint32     // incremented on every system call
	sysmontick  sysmontick // last tick observed by sysmon
	m           muintptr   // back-link to associated m (nil if idle)
	mcache      *mcache
	pcache      pageCache
	raceprocctx uintptr

	// gccgo has only one size of defer.
	deferpool    []*_defer
	deferpoolbuf [32]*_defer

	// Cache of goroutine ids, amortizes accesses to runtime·sched.goidgen.
	goidcache    uint64
	goidcacheend uint64

	// Queue of runnable goroutines. Accessed without lock.
	runqhead uint32
	runqtail uint32
	runq     [256]guintptr
	// runnext, if non-nil, is a runnable G that was ready'd by
	// the current G and should be run next instead of what's in
	// runq if there's time remaining in the running G's time
	// slice. It will inherit the time left in the current time
	// slice. If a set of goroutines is locked in a
	// communicate-and-wait pattern, this schedules that set as a
	// unit and eliminates the (potentially large) scheduling
	// latency that otherwise arises from adding the ready'd
	// goroutines to the end of the run queue.
	runnext guintptr

	// Available G's (status == Gdead)
	gFree struct {
		gList
		n int32
	}

	sudogcache []*sudog
	sudogbuf   [128]*sudog

	// Cache of mspan objects from the heap.
	mspancache struct {
		// We need an explicit length here because this field is used
		// in allocation codepaths where write barriers are not allowed,
		// and eliminating the write barrier/keeping it eliminated from
		// slice updates is tricky, moreso than just managing the length
		// ourselves.
		len int
		buf [128]*mspan
	}

	tracebuf traceBufPtr

	// traceSweep indicates the sweep events should be traced.
	// This is used to defer the sweep start event until a span
	// has actually been swept.
	traceSweep bool
	// traceSwept and traceReclaimed track the number of bytes
	// swept and reclaimed by sweeping in the current sweep loop.
	traceSwept, traceReclaimed uintptr

	palloc persistentAlloc // per-P to avoid mutex

	_ uint32 // Alignment for atomic fields below

	// Per-P GC state
	gcAssistTime         int64    // Nanoseconds in assistAlloc
	gcFractionalMarkTime int64    // Nanoseconds in fractional mark worker (atomic)
	gcBgMarkWorker       guintptr // (atomic)
	gcMarkWorkerMode     gcMarkWorkerMode

	// gcMarkWorkerStartTime is the nanotime() at which this mark
	// worker started.
	gcMarkWorkerStartTime int64

	// gcw is this P's GC work buffer cache. The work buffer is
	// filled by write barriers, drained by mutator assists, and
	// disposed on certain GC state transitions.
	gcw gcWork

	// wbBuf is this P's GC write barrier buffer.
	//
	// TODO: Consider caching this in the running G.
	wbBuf wbBuf

	runSafePointFn uint32 // if 1, run sched.safePointFn at next safe point

	// Lock for timers. We normally access the timers while running
	// on this P, but the scheduler can also do it from a different P.
	timersLock mutex

	// Actions to take at some time. This is used to implement the
	// standard library's time package.
	// Must hold timersLock to access.
	timers []*timer

	// Number of timerModifiedEarlier timers on P's heap.
	// This should only be modified while holding timersLock,
	// or while the timer status is in a transient state
	// such as timerModifying.
	adjustTimers uint32

	// Race context used while executing timer functions.
	// Not for gccgo: timerRaceCtx uintptr

	// preempt is set to indicate that this P should be enter the
	// scheduler ASAP (regardless of what G is running on it).
	preempt bool

	pad cpu.CacheLinePad
}

type schedt struct {
	// accessed atomically. keep at top to ensure alignment on 32-bit systems.
	goidgen   uint64
	lastpoll  uint64 // time of last network poll, 0 if currently polling
	pollUntil uint64 // time to which current poll is sleeping

	lock mutex

	// When increasing nmidle, nmidlelocked, nmsys, or nmfreed, be
	// sure to call checkdead().

	midle        muintptr // idle m's waiting for work
	nmidle       int32    // number of idle m's waiting for work
	nmidlelocked int32    // number of locked m's waiting for work
	mnext        int64    // number of m's that have been created and next M ID
	maxmcount    int32    // maximum number of m's allowed (or die)
	nmsys        int32    // number of system m's not counted for deadlock
	nmfreed      int64    // cumulative number of freed m's

	ngsys uint32 // number of system goroutines; updated atomically

	pidle      puintptr // idle p's
	npidle     uint32
	nmspinning uint32 // See "Worker thread parking/unparking" comment in proc.go.

	// Global runnable queue.
	runq     gQueue
	runqsize int32

	// disable controls selective disabling of the scheduler.
	//
	// Use schedEnableUser to control this.
	//
	// disable is protected by sched.lock.
	disable struct {
		// user disables scheduling of user goroutines.
		user     bool
		runnable gQueue // pending runnable Gs
		n        int32  // length of runnable
	}

	// Global cache of dead G's.
	gFree struct {
		lock mutex
		list gList // Gs
		n    int32
	}

	// Central cache of sudog structs.
	sudoglock  mutex
	sudogcache *sudog

	// Central pool of available defer structs.
	deferlock mutex
	deferpool *_defer

	// freem is the list of m's waiting to be freed when their
	// m.exited is set. Linked through m.freelink.
	freem *m

	gcwaiting  uint32 // gc is waiting to run
	stopwait   int32
	stopnote   note
	sysmonwait uint32
	sysmonnote note

	// safepointFn should be called on each P at the next GC
	// safepoint if p.runSafePointFn is set.
	safePointFn   func(*p)
	safePointWait int32
	safePointNote note

	profilehz int32 // cpu profiling rate

	procresizetime int64 // nanotime() of last change to gomaxprocs
	totaltime      int64 // ∫gomaxprocs dt up to procresizetime
}

// Values for the flags field of a sigTabT.
const (
	_SigNotify   = 1 << iota // let signal.Notify have signal, even if from kernel
	_SigKill                 // if signal.Notify doesn't take it, exit quietly
	_SigThrow                // if signal.Notify doesn't take it, exit loudly
	_SigPanic                // if the signal is from the kernel, panic
	_SigDefault              // if the signal isn't explicitly requested, don't monitor it
	_SigGoExit               // cause all runtime procs to exit (only used on Plan 9).
	_SigSetStack             // add SA_ONSTACK to libc handler
	_SigUnblock              // always unblock; see blockableSig
	_SigIgn                  // _SIG_DFL action is to ignore the signal
)

// Lock-free stack node.
// Also known to export_test.go.
type lfnode struct {
	next    uint64
	pushcnt uintptr
}

type forcegcstate struct {
	lock mutex
	g    *g
	idle uint32
}

// startup_random_data holds random bytes initialized at startup. These come from
// the ELF AT_RANDOM auxiliary vector (vdso_linux_amd64.go or os_linux_386.go).
var startupRandomData []byte

// extendRandom extends the random numbers in r[:n] to the whole slice r.
// Treats n<0 as n==0.
func extendRandom(r []byte, n int) {
	if n < 0 {
		n = 0
	}
	for n < len(r) {
		// Extend random bits using hash function & time seed
		w := n
		if w > 16 {
			w = 16
		}
		h := memhash(unsafe.Pointer(&r[n-w]), uintptr(nanotime()), uintptr(w))
		for i := 0; i < sys.PtrSize && n < len(r); i++ {
			r[n] = byte(h)
			n++
			h >>= 8
		}
	}
}

// A _defer holds an entry on the list of deferred calls.
// If you add a field here, add code to clear it in freedefer.
// This struct must match the code in Defer_statement::defer_struct_type
// in the compiler.
// Some defers will be allocated on the stack and some on the heap.
// All defers are logically part of the stack, so write barriers to
// initialize them are not required. All defers must be manually scanned,
// and for heap defers, marked.
type _defer struct {
	// The next entry in the stack.
	link *_defer

	// The stack variable for the function which called this defer
	// statement.  This is set to true if we are returning from
	// that function, false if we are panicing through it.
	frame *bool

	// The value of the panic stack when this function is
	// deferred.  This function can not recover this value from
	// the panic stack.  This can happen if a deferred function
	// has a defer statement itself.
	panicStack *_panic

	// The panic that caused the defer to run. This is used to
	// discard panics that have already been handled.
	_panic *_panic

	// The function to call.
	pfn uintptr

	// The argument to pass to the function.
	arg unsafe.Pointer

	// The return address that a recover thunk matches against.
	// This is set by __go_set_defer_retaddr which is called by
	// the thunks created by defer statements.
	retaddr uintptr

	// Set to true if a function created by reflect.MakeFunc is
	// permitted to recover.  The return address of such a
	// function function will be somewhere in libffi, so __retaddr
	// is not useful.
	makefunccanrecover bool

	// Whether the _defer is heap allocated.
	heap bool
}

// panics
// This is the gccgo version.
//
// This is marked go:notinheap because _panic values must only ever
// live on the stack.
//
//go:notinheap
type _panic struct {
	// The next entry in the stack.
	link *_panic

	// The value associated with this panic.
	arg interface{}

	// Whether this panic has been recovered.
	recovered bool

	// Whether this panic was pushed on the stack because of an
	// exception thrown in some other language.
	isforeign bool

	// Whether this panic was already seen by a deferred function
	// which called panic again.
	aborted bool

	// Whether this panic was created for goexit.
	goexit bool
}

// ancestorInfo records details of where a goroutine was started.
type ancestorInfo struct {
	pcs  []uintptr // pcs from the stack of this goroutine
	goid int64     // goroutine id of this goroutine; original goroutine possibly dead
	gopc uintptr   // pc of go statement that created this goroutine
}

const (
	_TraceRuntimeFrames = 1 << iota // include frames for internal runtime functions.
	_TraceTrap                      // the initial PC, SP are from a trap, not a return PC from a call
	_TraceJumpStack                 // if traceback is on a systemstack, resume trace at g that called into it
)

// The maximum number of frames we print for a traceback
const _TracebackMaxFrames = 100

// A waitReason explains why a goroutine has been stopped.
// See gopark. Do not re-use waitReasons, add new ones.
type waitReason uint8

const (
	waitReasonZero                  waitReason = iota // ""
	waitReasonGCAssistMarking                         // "GC assist marking"
	waitReasonIOWait                                  // "IO wait"
	waitReasonChanReceiveNilChan                      // "chan receive (nil chan)"
	waitReasonChanSendNilChan                         // "chan send (nil chan)"
	waitReasonDumpingHeap                             // "dumping heap"
	waitReasonGarbageCollection                       // "garbage collection"
	waitReasonGarbageCollectionScan                   // "garbage collection scan"
	waitReasonPanicWait                               // "panicwait"
	waitReasonSelect                                  // "select"
	waitReasonSelectNoCases                           // "select (no cases)"
	waitReasonGCAssistWait                            // "GC assist wait"
	waitReasonGCSweepWait                             // "GC sweep wait"
	waitReasonGCScavengeWait                          // "GC scavenge wait"
	waitReasonChanReceive                             // "chan receive"
	waitReasonChanSend                                // "chan send"
	waitReasonFinalizerWait                           // "finalizer wait"
	waitReasonForceGGIdle                             // "force gc (idle)"
	waitReasonSemacquire                              // "semacquire"
	waitReasonSleep                                   // "sleep"
	waitReasonSyncCondWait                            // "sync.Cond.Wait"
	waitReasonTimerGoroutineIdle                      // "timer goroutine (idle)"
	waitReasonTraceReaderBlocked                      // "trace reader (blocked)"
	waitReasonWaitForGCCycle                          // "wait for GC cycle"
	waitReasonGCWorkerIdle                            // "GC worker (idle)"
	waitReasonPreempted                               // "preempted"
)

var waitReasonStrings = [...]string{
	waitReasonZero:                  "",
	waitReasonGCAssistMarking:       "GC assist marking",
	waitReasonIOWait:                "IO wait",
	waitReasonChanReceiveNilChan:    "chan receive (nil chan)",
	waitReasonChanSendNilChan:       "chan send (nil chan)",
	waitReasonDumpingHeap:           "dumping heap",
	waitReasonGarbageCollection:     "garbage collection",
	waitReasonGarbageCollectionScan: "garbage collection scan",
	waitReasonPanicWait:             "panicwait",
	waitReasonSelect:                "select",
	waitReasonSelectNoCases:         "select (no cases)",
	waitReasonGCAssistWait:          "GC assist wait",
	waitReasonGCSweepWait:           "GC sweep wait",
	waitReasonGCScavengeWait:        "GC scavenge wait",
	waitReasonChanReceive:           "chan receive",
	waitReasonChanSend:              "chan send",
	waitReasonFinalizerWait:         "finalizer wait",
	waitReasonForceGGIdle:           "force gc (idle)",
	waitReasonSemacquire:            "semacquire",
	waitReasonSleep:                 "sleep",
	waitReasonSyncCondWait:          "sync.Cond.Wait",
	waitReasonTimerGoroutineIdle:    "timer goroutine (idle)",
	waitReasonTraceReaderBlocked:    "trace reader (blocked)",
	waitReasonWaitForGCCycle:        "wait for GC cycle",
	waitReasonGCWorkerIdle:          "GC worker (idle)",
	waitReasonPreempted:             "preempted",
}

func (w waitReason) String() string {
	if w < 0 || w >= waitReason(len(waitReasonStrings)) {
		return "unknown wait reason"
	}
	return waitReasonStrings[w]
}

var (
	allglen    uintptr
	allm       *m
	allp       []*p  // len(allp) == gomaxprocs; may change at safe points, otherwise immutable
	allpLock   mutex // Protects P-less reads of allp and all writes
	gomaxprocs int32
	ncpu       int32
	forcegc    forcegcstate
	sched      schedt
	newprocs   int32

	support_aes bool
)

// Set by the linker so the runtime can determine the buildmode.
var (
	islibrary bool // -buildmode=c-shared
	isarchive bool // -buildmode=c-archive
)

// Types that are only used by gccgo.

// g_ucontext_t is a Go version of the C ucontext_t type, used by getcontext.
// _sizeof_ucontext_t is defined by mkrsysinfo.sh from <ucontext.h>.
// On some systems getcontext and friends require a value that is
// aligned to a 16-byte boundary.  We implement this by increasing the
// required size and picking an appropriate offset when we use the
// array.
type g_ucontext_t [(_sizeof_ucontext_t + 15) / unsafe.Sizeof(uintptr(0))]uintptr

// sigset is the Go version of the C type sigset_t.
// _sigset_t is defined by the Makefile from <signal.h>.
type sigset _sigset_t

// getMemstats returns a pointer to the internal memstats variable,
// for C code.
//go:linkname getMemstats
func getMemstats() *mstats {
	return &memstats
}