blob: 1d7b0efa11b91ff7cc463497dc3270c33534569e [file] [log] [blame]
// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// HTTP reverse proxy handler
package httputil
import (
"context"
"fmt"
"io"
"log"
"net"
"net/http"
"net/url"
"strings"
"sync"
"time"
"golang.org/x/net/http/httpguts"
)
// ReverseProxy is an HTTP Handler that takes an incoming request and
// sends it to another server, proxying the response back to the
// client.
type ReverseProxy struct {
// Director must be a function which modifies
// the request into a new request to be sent
// using Transport. Its response is then copied
// back to the original client unmodified.
// Director must not access the provided Request
// after returning.
Director func(*http.Request)
// The transport used to perform proxy requests.
// If nil, http.DefaultTransport is used.
Transport http.RoundTripper
// FlushInterval specifies the flush interval
// to flush to the client while copying the
// response body.
// If zero, no periodic flushing is done.
// A negative value means to flush immediately
// after each write to the client.
// The FlushInterval is ignored when ReverseProxy
// recognizes a response as a streaming response;
// for such responses, writes are flushed to the client
// immediately.
FlushInterval time.Duration
// ErrorLog specifies an optional logger for errors
// that occur when attempting to proxy the request.
// If nil, logging is done via the log package's standard logger.
ErrorLog *log.Logger
// BufferPool optionally specifies a buffer pool to
// get byte slices for use by io.CopyBuffer when
// copying HTTP response bodies.
BufferPool BufferPool
// ModifyResponse is an optional function that modifies the
// Response from the backend. It is called if the backend
// returns a response at all, with any HTTP status code.
// If the backend is unreachable, the optional ErrorHandler is
// called without any call to ModifyResponse.
//
// If ModifyResponse returns an error, ErrorHandler is called
// with its error value. If ErrorHandler is nil, its default
// implementation is used.
ModifyResponse func(*http.Response) error
// ErrorHandler is an optional function that handles errors
// reaching the backend or errors from ModifyResponse.
//
// If nil, the default is to log the provided error and return
// a 502 Status Bad Gateway response.
ErrorHandler func(http.ResponseWriter, *http.Request, error)
}
// A BufferPool is an interface for getting and returning temporary
// byte slices for use by io.CopyBuffer.
type BufferPool interface {
Get() []byte
Put([]byte)
}
func singleJoiningSlash(a, b string) string {
aslash := strings.HasSuffix(a, "/")
bslash := strings.HasPrefix(b, "/")
switch {
case aslash && bslash:
return a + b[1:]
case !aslash && !bslash:
return a + "/" + b
}
return a + b
}
// NewSingleHostReverseProxy returns a new ReverseProxy that routes
// URLs to the scheme, host, and base path provided in target. If the
// target's path is "/base" and the incoming request was for "/dir",
// the target request will be for /base/dir.
// NewSingleHostReverseProxy does not rewrite the Host header.
// To rewrite Host headers, use ReverseProxy directly with a custom
// Director policy.
func NewSingleHostReverseProxy(target *url.URL) *ReverseProxy {
targetQuery := target.RawQuery
director := func(req *http.Request) {
req.URL.Scheme = target.Scheme
req.URL.Host = target.Host
req.URL.Path = singleJoiningSlash(target.Path, req.URL.Path)
if targetQuery == "" || req.URL.RawQuery == "" {
req.URL.RawQuery = targetQuery + req.URL.RawQuery
} else {
req.URL.RawQuery = targetQuery + "&" + req.URL.RawQuery
}
if _, ok := req.Header["User-Agent"]; !ok {
// explicitly disable User-Agent so it's not set to default value
req.Header.Set("User-Agent", "")
}
}
return &ReverseProxy{Director: director}
}
func copyHeader(dst, src http.Header) {
for k, vv := range src {
for _, v := range vv {
dst.Add(k, v)
}
}
}
// Hop-by-hop headers. These are removed when sent to the backend.
// As of RFC 7230, hop-by-hop headers are required to appear in the
// Connection header field. These are the headers defined by the
// obsoleted RFC 2616 (section 13.5.1) and are used for backward
// compatibility.
var hopHeaders = []string{
"Connection",
"Proxy-Connection", // non-standard but still sent by libcurl and rejected by e.g. google
"Keep-Alive",
"Proxy-Authenticate",
"Proxy-Authorization",
"Te", // canonicalized version of "TE"
"Trailer", // not Trailers per URL above; https://www.rfc-editor.org/errata_search.php?eid=4522
"Transfer-Encoding",
"Upgrade",
}
func (p *ReverseProxy) defaultErrorHandler(rw http.ResponseWriter, req *http.Request, err error) {
p.logf("http: proxy error: %v", err)
rw.WriteHeader(http.StatusBadGateway)
}
func (p *ReverseProxy) getErrorHandler() func(http.ResponseWriter, *http.Request, error) {
if p.ErrorHandler != nil {
return p.ErrorHandler
}
return p.defaultErrorHandler
}
// modifyResponse conditionally runs the optional ModifyResponse hook
// and reports whether the request should proceed.
func (p *ReverseProxy) modifyResponse(rw http.ResponseWriter, res *http.Response, req *http.Request) bool {
if p.ModifyResponse == nil {
return true
}
if err := p.ModifyResponse(res); err != nil {
res.Body.Close()
p.getErrorHandler()(rw, req, err)
return false
}
return true
}
func (p *ReverseProxy) ServeHTTP(rw http.ResponseWriter, req *http.Request) {
transport := p.Transport
if transport == nil {
transport = http.DefaultTransport
}
ctx := req.Context()
if cn, ok := rw.(http.CloseNotifier); ok {
var cancel context.CancelFunc
ctx, cancel = context.WithCancel(ctx)
defer cancel()
notifyChan := cn.CloseNotify()
go func() {
select {
case <-notifyChan:
cancel()
case <-ctx.Done():
}
}()
}
outreq := req.Clone(ctx)
if req.ContentLength == 0 {
outreq.Body = nil // Issue 16036: nil Body for http.Transport retries
}
p.Director(outreq)
outreq.Close = false
reqUpType := upgradeType(outreq.Header)
removeConnectionHeaders(outreq.Header)
// Remove hop-by-hop headers to the backend. Especially
// important is "Connection" because we want a persistent
// connection, regardless of what the client sent to us.
for _, h := range hopHeaders {
hv := outreq.Header.Get(h)
if hv == "" {
continue
}
if h == "Te" && hv == "trailers" {
// Issue 21096: tell backend applications that
// care about trailer support that we support
// trailers. (We do, but we don't go out of
// our way to advertise that unless the
// incoming client request thought it was
// worth mentioning)
continue
}
outreq.Header.Del(h)
}
// After stripping all the hop-by-hop connection headers above, add back any
// necessary for protocol upgrades, such as for websockets.
if reqUpType != "" {
outreq.Header.Set("Connection", "Upgrade")
outreq.Header.Set("Upgrade", reqUpType)
}
if clientIP, _, err := net.SplitHostPort(req.RemoteAddr); err == nil {
// If we aren't the first proxy retain prior
// X-Forwarded-For information as a comma+space
// separated list and fold multiple headers into one.
if prior, ok := outreq.Header["X-Forwarded-For"]; ok {
clientIP = strings.Join(prior, ", ") + ", " + clientIP
}
outreq.Header.Set("X-Forwarded-For", clientIP)
}
res, err := transport.RoundTrip(outreq)
if err != nil {
p.getErrorHandler()(rw, outreq, err)
return
}
// Deal with 101 Switching Protocols responses: (WebSocket, h2c, etc)
if res.StatusCode == http.StatusSwitchingProtocols {
if !p.modifyResponse(rw, res, outreq) {
return
}
p.handleUpgradeResponse(rw, outreq, res)
return
}
removeConnectionHeaders(res.Header)
for _, h := range hopHeaders {
res.Header.Del(h)
}
if !p.modifyResponse(rw, res, outreq) {
return
}
copyHeader(rw.Header(), res.Header)
// The "Trailer" header isn't included in the Transport's response,
// at least for *http.Transport. Build it up from Trailer.
announcedTrailers := len(res.Trailer)
if announcedTrailers > 0 {
trailerKeys := make([]string, 0, len(res.Trailer))
for k := range res.Trailer {
trailerKeys = append(trailerKeys, k)
}
rw.Header().Add("Trailer", strings.Join(trailerKeys, ", "))
}
rw.WriteHeader(res.StatusCode)
err = p.copyResponse(rw, res.Body, p.flushInterval(req, res))
if err != nil {
defer res.Body.Close()
// Since we're streaming the response, if we run into an error all we can do
// is abort the request. Issue 23643: ReverseProxy should use ErrAbortHandler
// on read error while copying body.
if !shouldPanicOnCopyError(req) {
p.logf("suppressing panic for copyResponse error in test; copy error: %v", err)
return
}
panic(http.ErrAbortHandler)
}
res.Body.Close() // close now, instead of defer, to populate res.Trailer
if len(res.Trailer) > 0 {
// Force chunking if we saw a response trailer.
// This prevents net/http from calculating the length for short
// bodies and adding a Content-Length.
if fl, ok := rw.(http.Flusher); ok {
fl.Flush()
}
}
if len(res.Trailer) == announcedTrailers {
copyHeader(rw.Header(), res.Trailer)
return
}
for k, vv := range res.Trailer {
k = http.TrailerPrefix + k
for _, v := range vv {
rw.Header().Add(k, v)
}
}
}
var inOurTests bool // whether we're in our own tests
// shouldPanicOnCopyError reports whether the reverse proxy should
// panic with http.ErrAbortHandler. This is the right thing to do by
// default, but Go 1.10 and earlier did not, so existing unit tests
// weren't expecting panics. Only panic in our own tests, or when
// running under the HTTP server.
func shouldPanicOnCopyError(req *http.Request) bool {
if inOurTests {
// Our tests know to handle this panic.
return true
}
if req.Context().Value(http.ServerContextKey) != nil {
// We seem to be running under an HTTP server, so
// it'll recover the panic.
return true
}
// Otherwise act like Go 1.10 and earlier to not break
// existing tests.
return false
}
// removeConnectionHeaders removes hop-by-hop headers listed in the "Connection" header of h.
// See RFC 7230, section 6.1
func removeConnectionHeaders(h http.Header) {
for _, f := range h["Connection"] {
for _, sf := range strings.Split(f, ",") {
if sf = strings.TrimSpace(sf); sf != "" {
h.Del(sf)
}
}
}
}
// flushInterval returns the p.FlushInterval value, conditionally
// overriding its value for a specific request/response.
func (p *ReverseProxy) flushInterval(req *http.Request, res *http.Response) time.Duration {
resCT := res.Header.Get("Content-Type")
// For Server-Sent Events responses, flush immediately.
// The MIME type is defined in https://www.w3.org/TR/eventsource/#text-event-stream
if resCT == "text/event-stream" {
return -1 // negative means immediately
}
// TODO: more specific cases? e.g. res.ContentLength == -1?
return p.FlushInterval
}
func (p *ReverseProxy) copyResponse(dst io.Writer, src io.Reader, flushInterval time.Duration) error {
if flushInterval != 0 {
if wf, ok := dst.(writeFlusher); ok {
mlw := &maxLatencyWriter{
dst: wf,
latency: flushInterval,
}
defer mlw.stop()
// set up initial timer so headers get flushed even if body writes are delayed
mlw.flushPending = true
mlw.t = time.AfterFunc(flushInterval, mlw.delayedFlush)
dst = mlw
}
}
var buf []byte
if p.BufferPool != nil {
buf = p.BufferPool.Get()
defer p.BufferPool.Put(buf)
}
_, err := p.copyBuffer(dst, src, buf)
return err
}
// copyBuffer returns any write errors or non-EOF read errors, and the amount
// of bytes written.
func (p *ReverseProxy) copyBuffer(dst io.Writer, src io.Reader, buf []byte) (int64, error) {
if len(buf) == 0 {
buf = make([]byte, 32*1024)
}
var written int64
for {
nr, rerr := src.Read(buf)
if rerr != nil && rerr != io.EOF && rerr != context.Canceled {
p.logf("httputil: ReverseProxy read error during body copy: %v", rerr)
}
if nr > 0 {
nw, werr := dst.Write(buf[:nr])
if nw > 0 {
written += int64(nw)
}
if werr != nil {
return written, werr
}
if nr != nw {
return written, io.ErrShortWrite
}
}
if rerr != nil {
if rerr == io.EOF {
rerr = nil
}
return written, rerr
}
}
}
func (p *ReverseProxy) logf(format string, args ...interface{}) {
if p.ErrorLog != nil {
p.ErrorLog.Printf(format, args...)
} else {
log.Printf(format, args...)
}
}
type writeFlusher interface {
io.Writer
http.Flusher
}
type maxLatencyWriter struct {
dst writeFlusher
latency time.Duration // non-zero; negative means to flush immediately
mu sync.Mutex // protects t, flushPending, and dst.Flush
t *time.Timer
flushPending bool
}
func (m *maxLatencyWriter) Write(p []byte) (n int, err error) {
m.mu.Lock()
defer m.mu.Unlock()
n, err = m.dst.Write(p)
if m.latency < 0 {
m.dst.Flush()
return
}
if m.flushPending {
return
}
if m.t == nil {
m.t = time.AfterFunc(m.latency, m.delayedFlush)
} else {
m.t.Reset(m.latency)
}
m.flushPending = true
return
}
func (m *maxLatencyWriter) delayedFlush() {
m.mu.Lock()
defer m.mu.Unlock()
if !m.flushPending { // if stop was called but AfterFunc already started this goroutine
return
}
m.dst.Flush()
m.flushPending = false
}
func (m *maxLatencyWriter) stop() {
m.mu.Lock()
defer m.mu.Unlock()
m.flushPending = false
if m.t != nil {
m.t.Stop()
}
}
func upgradeType(h http.Header) string {
if !httpguts.HeaderValuesContainsToken(h["Connection"], "Upgrade") {
return ""
}
return strings.ToLower(h.Get("Upgrade"))
}
func (p *ReverseProxy) handleUpgradeResponse(rw http.ResponseWriter, req *http.Request, res *http.Response) {
reqUpType := upgradeType(req.Header)
resUpType := upgradeType(res.Header)
if reqUpType != resUpType {
p.getErrorHandler()(rw, req, fmt.Errorf("backend tried to switch protocol %q when %q was requested", resUpType, reqUpType))
return
}
copyHeader(res.Header, rw.Header())
hj, ok := rw.(http.Hijacker)
if !ok {
p.getErrorHandler()(rw, req, fmt.Errorf("can't switch protocols using non-Hijacker ResponseWriter type %T", rw))
return
}
backConn, ok := res.Body.(io.ReadWriteCloser)
if !ok {
p.getErrorHandler()(rw, req, fmt.Errorf("internal error: 101 switching protocols response with non-writable body"))
return
}
defer backConn.Close()
conn, brw, err := hj.Hijack()
if err != nil {
p.getErrorHandler()(rw, req, fmt.Errorf("Hijack failed on protocol switch: %v", err))
return
}
defer conn.Close()
res.Body = nil // so res.Write only writes the headers; we have res.Body in backConn above
if err := res.Write(brw); err != nil {
p.getErrorHandler()(rw, req, fmt.Errorf("response write: %v", err))
return
}
if err := brw.Flush(); err != nil {
p.getErrorHandler()(rw, req, fmt.Errorf("response flush: %v", err))
return
}
errc := make(chan error, 1)
spc := switchProtocolCopier{user: conn, backend: backConn}
go spc.copyToBackend(errc)
go spc.copyFromBackend(errc)
<-errc
return
}
// switchProtocolCopier exists so goroutines proxying data back and
// forth have nice names in stacks.
type switchProtocolCopier struct {
user, backend io.ReadWriter
}
func (c switchProtocolCopier) copyFromBackend(errc chan<- error) {
_, err := io.Copy(c.user, c.backend)
errc <- err
}
func (c switchProtocolCopier) copyToBackend(errc chan<- error) {
_, err := io.Copy(c.backend, c.user)
errc <- err
}