blob: f09396175acf86099e5d902fb944d1f8131210e2 [file] [log] [blame]
// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Package driver defines interfaces to be implemented by database
// drivers as used by package sql.
//
// Most code should use package sql.
//
// The driver interface has evolved over time. Drivers should implement
// Connector and DriverContext interfaces.
// The Connector.Connect and Driver.Open methods should never return ErrBadConn.
// ErrBadConn should only be returned from Validator, SessionResetter, or
// a query method if the connection is already in an invalid (e.g. closed) state.
//
// All Conn implementations should implement the following interfaces:
// Pinger, SessionResetter, and Validator.
//
// If named parameters or context are supported, the driver's Conn should implement:
// ExecerContext, QueryerContext, ConnPrepareContext, and ConnBeginTx.
//
// To support custom data types, implement NamedValueChecker. NamedValueChecker
// also allows queries to accept per-query options as a parameter by returning
// ErrRemoveArgument from CheckNamedValue.
//
// If multiple result sets are supported, Rows should implement RowsNextResultSet.
// If the driver knows how to describe the types present in the returned result
// it should implement the following interfaces: RowsColumnTypeScanType,
// RowsColumnTypeDatabaseTypeName, RowsColumnTypeLength, RowsColumnTypeNullable,
// and RowsColumnTypePrecisionScale. A given row value may also return a Rows
// type, which may represent a database cursor value.
//
// Before a connection is returned to the connection pool after use, IsValid is
// called if implemented. Before a connection is reused for another query,
// ResetSession is called if implemented. If a connection is never returned to the
// connection pool but immediately reused, then ResetSession is called prior to
// reuse but IsValid is not called.
package driver
import (
"context"
"errors"
"reflect"
)
// Value is a value that drivers must be able to handle.
// It is either nil, a type handled by a database driver's NamedValueChecker
// interface, or an instance of one of these types:
//
// int64
// float64
// bool
// []byte
// string
// time.Time
//
// If the driver supports cursors, a returned Value may also implement the Rows interface
// in this package. This is used, for example, when a user selects a cursor
// such as "select cursor(select * from my_table) from dual". If the Rows
// from the select is closed, the cursor Rows will also be closed.
type Value interface{}
// NamedValue holds both the value name and value.
type NamedValue struct {
// If the Name is not empty it should be used for the parameter identifier and
// not the ordinal position.
//
// Name will not have a symbol prefix.
Name string
// Ordinal position of the parameter starting from one and is always set.
Ordinal int
// Value is the parameter value.
Value Value
}
// Driver is the interface that must be implemented by a database
// driver.
//
// Database drivers may implement DriverContext for access
// to contexts and to parse the name only once for a pool of connections,
// instead of once per connection.
type Driver interface {
// Open returns a new connection to the database.
// The name is a string in a driver-specific format.
//
// Open may return a cached connection (one previously
// closed), but doing so is unnecessary; the sql package
// maintains a pool of idle connections for efficient re-use.
//
// The returned connection is only used by one goroutine at a
// time.
Open(name string) (Conn, error)
}
// If a Driver implements DriverContext, then sql.DB will call
// OpenConnector to obtain a Connector and then invoke
// that Connector's Connect method to obtain each needed connection,
// instead of invoking the Driver's Open method for each connection.
// The two-step sequence allows drivers to parse the name just once
// and also provides access to per-Conn contexts.
type DriverContext interface {
// OpenConnector must parse the name in the same format that Driver.Open
// parses the name parameter.
OpenConnector(name string) (Connector, error)
}
// A Connector represents a driver in a fixed configuration
// and can create any number of equivalent Conns for use
// by multiple goroutines.
//
// A Connector can be passed to sql.OpenDB, to allow drivers
// to implement their own sql.DB constructors, or returned by
// DriverContext's OpenConnector method, to allow drivers
// access to context and to avoid repeated parsing of driver
// configuration.
//
// If a Connector implements io.Closer, the sql package's DB.Close
// method will call Close and return error (if any).
type Connector interface {
// Connect returns a connection to the database.
// Connect may return a cached connection (one previously
// closed), but doing so is unnecessary; the sql package
// maintains a pool of idle connections for efficient re-use.
//
// The provided context.Context is for dialing purposes only
// (see net.DialContext) and should not be stored or used for
// other purposes. A default timeout should still be used
// when dialing as a connection pool may call Connect
// asynchronously to any query.
//
// The returned connection is only used by one goroutine at a
// time.
Connect(context.Context) (Conn, error)
// Driver returns the underlying Driver of the Connector,
// mainly to maintain compatibility with the Driver method
// on sql.DB.
Driver() Driver
}
// ErrSkip may be returned by some optional interfaces' methods to
// indicate at runtime that the fast path is unavailable and the sql
// package should continue as if the optional interface was not
// implemented. ErrSkip is only supported where explicitly
// documented.
var ErrSkip = errors.New("driver: skip fast-path; continue as if unimplemented")
// ErrBadConn should be returned by a driver to signal to the sql
// package that a driver.Conn is in a bad state (such as the server
// having earlier closed the connection) and the sql package should
// retry on a new connection.
//
// To prevent duplicate operations, ErrBadConn should NOT be returned
// if there's a possibility that the database server might have
// performed the operation. Even if the server sends back an error,
// you shouldn't return ErrBadConn.
var ErrBadConn = errors.New("driver: bad connection")
// Pinger is an optional interface that may be implemented by a Conn.
//
// If a Conn does not implement Pinger, the sql package's DB.Ping and
// DB.PingContext will check if there is at least one Conn available.
//
// If Conn.Ping returns ErrBadConn, DB.Ping and DB.PingContext will remove
// the Conn from pool.
type Pinger interface {
Ping(ctx context.Context) error
}
// Execer is an optional interface that may be implemented by a Conn.
//
// If a Conn implements neither ExecerContext nor Execer,
// the sql package's DB.Exec will first prepare a query, execute the statement,
// and then close the statement.
//
// Exec may return ErrSkip.
//
// Deprecated: Drivers should implement ExecerContext instead.
type Execer interface {
Exec(query string, args []Value) (Result, error)
}
// ExecerContext is an optional interface that may be implemented by a Conn.
//
// If a Conn does not implement ExecerContext, the sql package's DB.Exec
// will fall back to Execer; if the Conn does not implement Execer either,
// DB.Exec will first prepare a query, execute the statement, and then
// close the statement.
//
// ExecerContext may return ErrSkip.
//
// ExecerContext must honor the context timeout and return when the context is canceled.
type ExecerContext interface {
ExecContext(ctx context.Context, query string, args []NamedValue) (Result, error)
}
// Queryer is an optional interface that may be implemented by a Conn.
//
// If a Conn implements neither QueryerContext nor Queryer,
// the sql package's DB.Query will first prepare a query, execute the statement,
// and then close the statement.
//
// Query may return ErrSkip.
//
// Deprecated: Drivers should implement QueryerContext instead.
type Queryer interface {
Query(query string, args []Value) (Rows, error)
}
// QueryerContext is an optional interface that may be implemented by a Conn.
//
// If a Conn does not implement QueryerContext, the sql package's DB.Query
// will fall back to Queryer; if the Conn does not implement Queryer either,
// DB.Query will first prepare a query, execute the statement, and then
// close the statement.
//
// QueryerContext may return ErrSkip.
//
// QueryerContext must honor the context timeout and return when the context is canceled.
type QueryerContext interface {
QueryContext(ctx context.Context, query string, args []NamedValue) (Rows, error)
}
// Conn is a connection to a database. It is not used concurrently
// by multiple goroutines.
//
// Conn is assumed to be stateful.
type Conn interface {
// Prepare returns a prepared statement, bound to this connection.
Prepare(query string) (Stmt, error)
// Close invalidates and potentially stops any current
// prepared statements and transactions, marking this
// connection as no longer in use.
//
// Because the sql package maintains a free pool of
// connections and only calls Close when there's a surplus of
// idle connections, it shouldn't be necessary for drivers to
// do their own connection caching.
//
// Drivers must ensure all network calls made by Close
// do not block indefinitely (e.g. apply a timeout).
Close() error
// Begin starts and returns a new transaction.
//
// Deprecated: Drivers should implement ConnBeginTx instead (or additionally).
Begin() (Tx, error)
}
// ConnPrepareContext enhances the Conn interface with context.
type ConnPrepareContext interface {
// PrepareContext returns a prepared statement, bound to this connection.
// context is for the preparation of the statement,
// it must not store the context within the statement itself.
PrepareContext(ctx context.Context, query string) (Stmt, error)
}
// IsolationLevel is the transaction isolation level stored in TxOptions.
//
// This type should be considered identical to sql.IsolationLevel along
// with any values defined on it.
type IsolationLevel int
// TxOptions holds the transaction options.
//
// This type should be considered identical to sql.TxOptions.
type TxOptions struct {
Isolation IsolationLevel
ReadOnly bool
}
// ConnBeginTx enhances the Conn interface with context and TxOptions.
type ConnBeginTx interface {
// BeginTx starts and returns a new transaction.
// If the context is canceled by the user the sql package will
// call Tx.Rollback before discarding and closing the connection.
//
// This must check opts.Isolation to determine if there is a set
// isolation level. If the driver does not support a non-default
// level and one is set or if there is a non-default isolation level
// that is not supported, an error must be returned.
//
// This must also check opts.ReadOnly to determine if the read-only
// value is true to either set the read-only transaction property if supported
// or return an error if it is not supported.
BeginTx(ctx context.Context, opts TxOptions) (Tx, error)
}
// SessionResetter may be implemented by Conn to allow drivers to reset the
// session state associated with the connection and to signal a bad connection.
type SessionResetter interface {
// ResetSession is called prior to executing a query on the connection
// if the connection has been used before. If the driver returns ErrBadConn
// the connection is discarded.
ResetSession(ctx context.Context) error
}
// Validator may be implemented by Conn to allow drivers to
// signal if a connection is valid or if it should be discarded.
//
// If implemented, drivers may return the underlying error from queries,
// even if the connection should be discarded by the connection pool.
type Validator interface {
// IsValid is called prior to placing the connection into the
// connection pool. The connection will be discarded if false is returned.
IsValid() bool
}
// Result is the result of a query execution.
type Result interface {
// LastInsertId returns the database's auto-generated ID
// after, for example, an INSERT into a table with primary
// key.
LastInsertId() (int64, error)
// RowsAffected returns the number of rows affected by the
// query.
RowsAffected() (int64, error)
}
// Stmt is a prepared statement. It is bound to a Conn and not
// used by multiple goroutines concurrently.
type Stmt interface {
// Close closes the statement.
//
// As of Go 1.1, a Stmt will not be closed if it's in use
// by any queries.
//
// Drivers must ensure all network calls made by Close
// do not block indefinitely (e.g. apply a timeout).
Close() error
// NumInput returns the number of placeholder parameters.
//
// If NumInput returns >= 0, the sql package will sanity check
// argument counts from callers and return errors to the caller
// before the statement's Exec or Query methods are called.
//
// NumInput may also return -1, if the driver doesn't know
// its number of placeholders. In that case, the sql package
// will not sanity check Exec or Query argument counts.
NumInput() int
// Exec executes a query that doesn't return rows, such
// as an INSERT or UPDATE.
//
// Deprecated: Drivers should implement StmtExecContext instead (or additionally).
Exec(args []Value) (Result, error)
// Query executes a query that may return rows, such as a
// SELECT.
//
// Deprecated: Drivers should implement StmtQueryContext instead (or additionally).
Query(args []Value) (Rows, error)
}
// StmtExecContext enhances the Stmt interface by providing Exec with context.
type StmtExecContext interface {
// ExecContext executes a query that doesn't return rows, such
// as an INSERT or UPDATE.
//
// ExecContext must honor the context timeout and return when it is canceled.
ExecContext(ctx context.Context, args []NamedValue) (Result, error)
}
// StmtQueryContext enhances the Stmt interface by providing Query with context.
type StmtQueryContext interface {
// QueryContext executes a query that may return rows, such as a
// SELECT.
//
// QueryContext must honor the context timeout and return when it is canceled.
QueryContext(ctx context.Context, args []NamedValue) (Rows, error)
}
// ErrRemoveArgument may be returned from NamedValueChecker to instruct the
// sql package to not pass the argument to the driver query interface.
// Return when accepting query specific options or structures that aren't
// SQL query arguments.
var ErrRemoveArgument = errors.New("driver: remove argument from query")
// NamedValueChecker may be optionally implemented by Conn or Stmt. It provides
// the driver more control to handle Go and database types beyond the default
// Values types allowed.
//
// The sql package checks for value checkers in the following order,
// stopping at the first found match: Stmt.NamedValueChecker, Conn.NamedValueChecker,
// Stmt.ColumnConverter, DefaultParameterConverter.
//
// If CheckNamedValue returns ErrRemoveArgument, the NamedValue will not be included in
// the final query arguments. This may be used to pass special options to
// the query itself.
//
// If ErrSkip is returned the column converter error checking
// path is used for the argument. Drivers may wish to return ErrSkip after
// they have exhausted their own special cases.
type NamedValueChecker interface {
// CheckNamedValue is called before passing arguments to the driver
// and is called in place of any ColumnConverter. CheckNamedValue must do type
// validation and conversion as appropriate for the driver.
CheckNamedValue(*NamedValue) error
}
// ColumnConverter may be optionally implemented by Stmt if the
// statement is aware of its own columns' types and can convert from
// any type to a driver Value.
//
// Deprecated: Drivers should implement NamedValueChecker.
type ColumnConverter interface {
// ColumnConverter returns a ValueConverter for the provided
// column index. If the type of a specific column isn't known
// or shouldn't be handled specially, DefaultValueConverter
// can be returned.
ColumnConverter(idx int) ValueConverter
}
// Rows is an iterator over an executed query's results.
type Rows interface {
// Columns returns the names of the columns. The number of
// columns of the result is inferred from the length of the
// slice. If a particular column name isn't known, an empty
// string should be returned for that entry.
Columns() []string
// Close closes the rows iterator.
Close() error
// Next is called to populate the next row of data into
// the provided slice. The provided slice will be the same
// size as the Columns() are wide.
//
// Next should return io.EOF when there are no more rows.
//
// The dest should not be written to outside of Next. Care
// should be taken when closing Rows not to modify
// a buffer held in dest.
Next(dest []Value) error
}
// RowsNextResultSet extends the Rows interface by providing a way to signal
// the driver to advance to the next result set.
type RowsNextResultSet interface {
Rows
// HasNextResultSet is called at the end of the current result set and
// reports whether there is another result set after the current one.
HasNextResultSet() bool
// NextResultSet advances the driver to the next result set even
// if there are remaining rows in the current result set.
//
// NextResultSet should return io.EOF when there are no more result sets.
NextResultSet() error
}
// RowsColumnTypeScanType may be implemented by Rows. It should return
// the value type that can be used to scan types into. For example, the database
// column type "bigint" this should return "reflect.TypeOf(int64(0))".
type RowsColumnTypeScanType interface {
Rows
ColumnTypeScanType(index int) reflect.Type
}
// RowsColumnTypeDatabaseTypeName may be implemented by Rows. It should return the
// database system type name without the length. Type names should be uppercase.
// Examples of returned types: "VARCHAR", "NVARCHAR", "VARCHAR2", "CHAR", "TEXT",
// "DECIMAL", "SMALLINT", "INT", "BIGINT", "BOOL", "[]BIGINT", "JSONB", "XML",
// "TIMESTAMP".
type RowsColumnTypeDatabaseTypeName interface {
Rows
ColumnTypeDatabaseTypeName(index int) string
}
// RowsColumnTypeLength may be implemented by Rows. It should return the length
// of the column type if the column is a variable length type. If the column is
// not a variable length type ok should return false.
// If length is not limited other than system limits, it should return math.MaxInt64.
// The following are examples of returned values for various types:
// TEXT (math.MaxInt64, true)
// varchar(10) (10, true)
// nvarchar(10) (10, true)
// decimal (0, false)
// int (0, false)
// bytea(30) (30, true)
type RowsColumnTypeLength interface {
Rows
ColumnTypeLength(index int) (length int64, ok bool)
}
// RowsColumnTypeNullable may be implemented by Rows. The nullable value should
// be true if it is known the column may be null, or false if the column is known
// to be not nullable.
// If the column nullability is unknown, ok should be false.
type RowsColumnTypeNullable interface {
Rows
ColumnTypeNullable(index int) (nullable, ok bool)
}
// RowsColumnTypePrecisionScale may be implemented by Rows. It should return
// the precision and scale for decimal types. If not applicable, ok should be false.
// The following are examples of returned values for various types:
// decimal(38, 4) (38, 4, true)
// int (0, 0, false)
// decimal (math.MaxInt64, math.MaxInt64, true)
type RowsColumnTypePrecisionScale interface {
Rows
ColumnTypePrecisionScale(index int) (precision, scale int64, ok bool)
}
// Tx is a transaction.
type Tx interface {
Commit() error
Rollback() error
}
// RowsAffected implements Result for an INSERT or UPDATE operation
// which mutates a number of rows.
type RowsAffected int64
var _ Result = RowsAffected(0)
func (RowsAffected) LastInsertId() (int64, error) {
return 0, errors.New("LastInsertId is not supported by this driver")
}
func (v RowsAffected) RowsAffected() (int64, error) {
return int64(v), nil
}
// ResultNoRows is a pre-defined Result for drivers to return when a DDL
// command (such as a CREATE TABLE) succeeds. It returns an error for both
// LastInsertId and RowsAffected.
var ResultNoRows noRows
type noRows struct{}
var _ Result = noRows{}
func (noRows) LastInsertId() (int64, error) {
return 0, errors.New("no LastInsertId available after DDL statement")
}
func (noRows) RowsAffected() (int64, error) {
return 0, errors.New("no RowsAffected available after DDL statement")
}