// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

//
// System calls and other sys.stuff for AMD64, Darwin
// See http://fxr.watson.org/fxr/source/bsd/kern/syscalls.c?v=xnu-1228
// or /usr/include/sys/syscall.h (on a Mac) for system call numbers.
//
// The low 24 bits are the system call number.
// The high 8 bits specify the kind of system call: 1=Mach, 2=BSD, 3=Machine-Dependent.
//

#include "amd64/asm.h"

// Exit the entire program (like C exit)
TEXT runtime·exit(SB),7,$0
	MOVL	8(SP), DI		// arg 1 exit status
	MOVL	$(0x2000000+1), AX	// syscall entry
	SYSCALL
	CALL	runtime·notok(SB)
	RET

// Exit this OS thread (like pthread_exit, which eventually
// calls __bsdthread_terminate).
TEXT runtime·exit1(SB),7,$0
	MOVL	8(SP), DI		// arg 1 exit status
	MOVL	$(0x2000000+361), AX	// syscall entry
	SYSCALL
	CALL	runtime·notok(SB)
	RET

TEXT runtime·write(SB),7,$0
	MOVL	8(SP), DI		// arg 1 fd
	MOVQ	16(SP), SI		// arg 2 buf
	MOVL	24(SP), DX		// arg 3 count
	MOVL	$(0x2000000+4), AX	// syscall entry
	SYSCALL
	RET

// void gettime(int64 *sec, int32 *usec)
TEXT runtime·gettime(SB), 7, $32
	MOVQ	SP, DI	// must be non-nil, unused
	MOVQ	$0, SI
	MOVQ	$(0x2000000+116), AX
	SYSCALL
	MOVQ	sec+0(FP), DI
	MOVQ	AX, (DI)
	MOVQ	usec+8(FP), DI
	MOVL	DX, (DI)
	RET

TEXT runtime·sigaction(SB),7,$0
	MOVL	8(SP), DI		// arg 1 sig
	MOVQ	16(SP), SI		// arg 2 act
	MOVQ	24(SP), DX		// arg 3 oact
	MOVQ	24(SP), CX		// arg 3 oact
	MOVQ	24(SP), R10		// arg 3 oact
	MOVL	$(0x2000000+46), AX	// syscall entry
	SYSCALL
	JCC	2(PC)
	CALL	runtime·notok(SB)
	RET

TEXT runtime·sigtramp(SB),7,$64
	get_tls(BX)
	
	// save g
	MOVQ	g(BX), BP
	MOVQ	BP, 40(SP)
	
	// g = m->gsignal
	MOVQ	m(BX), BP
	MOVQ	m_gsignal(BP), BP
	MOVQ	BP, g(BX)

	MOVL	DX, 0(SP)
	MOVQ	CX, 8(SP)
	MOVQ	R8, 16(SP)
	MOVQ	R8, 24(SP)	// save ucontext
	MOVQ	SI, 32(SP)	// save infostyle
	CALL	DI

	// restore g
	get_tls(BX)
	MOVQ	40(SP), BP
	MOVQ	BP, g(BX)

	MOVL	$(0x2000000+184), AX	// sigreturn(ucontext, infostyle)
	MOVQ	24(SP), DI	// saved ucontext
	MOVQ	32(SP), SI	// saved infostyle
	SYSCALL
	INT $3	// not reached

TEXT runtime·mmap(SB),7,$0
	MOVQ	8(SP), DI		// arg 1 addr
	MOVQ	16(SP), SI		// arg 2 len
	MOVL	24(SP), DX		// arg 3 prot
	MOVL	28(SP), R10		// arg 4 flags
	MOVL	32(SP), R8		// arg 5 fid
	MOVL	36(SP), R9		// arg 6 offset
	MOVL	$(0x2000000+197), AX	// syscall entry
	SYSCALL
	RET

TEXT runtime·munmap(SB),7,$0
	MOVQ	8(SP), DI		// arg 1 addr
	MOVQ	16(SP), SI		// arg 2 len
	MOVL	$(0x2000000+73), AX	// syscall entry
	SYSCALL
	JCC	2(PC)
	CALL	runtime·notok(SB)
	RET

TEXT runtime·notok(SB),7,$0
	MOVL	$0xf1, BP
	MOVQ	BP, (BP)
	RET

TEXT runtime·sigaltstack(SB),7,$0
	MOVQ	new+8(SP), DI
	MOVQ	old+16(SP), SI
	MOVQ	$(0x2000000+53), AX
	SYSCALL
	JCC	2(PC)
	CALL	runtime·notok(SB)
	RET

// void bsdthread_create(void *stk, M *m, G *g, void (*fn)(void))
TEXT runtime·bsdthread_create(SB),7,$0
	// Set up arguments to bsdthread_create system call.
	// The ones in quotes pass through to the thread callback
	// uninterpreted, so we can put whatever we want there.
	MOVQ	fn+32(SP), DI	// "func"
	MOVQ	mm+16(SP), SI	// "arg"
	MOVQ	stk+8(SP), DX	// stack
	MOVQ	gg+24(SP), R10	// "pthread"
// TODO(rsc): why do we get away with 0 flags here but not on 386?
	MOVQ	$0, R8	// flags
	MOVQ	$0, R9	// paranoia
	MOVQ	$(0x2000000+360), AX	// bsdthread_create
	SYSCALL
	JCC 3(PC)
	NEGL	AX
	RET
	MOVL	$0, AX
	RET

// The thread that bsdthread_create creates starts executing here,
// because we registered this function using bsdthread_register
// at startup.
//	DI = "pthread"
//	SI = mach thread port
//	DX = "func" (= fn)
//	CX = "arg" (= m)
//	R8 = stack
//	R9 = flags (= 0)
//	SP = stack - C_64_REDZONE_LEN (= stack - 128)
TEXT runtime·bsdthread_start(SB),7,$0
	MOVQ	R8, SP		// empirically, SP is very wrong but R8 is right

	PUSHQ	DX
	PUSHQ	CX
	PUSHQ	SI

	// set up thread local storage pointing at m->tls.
	LEAQ	m_tls(CX), DI
	CALL	runtime·settls(SB)

	POPQ	SI
	POPQ	CX
	POPQ	DX
	
	get_tls(BX)
	MOVQ	CX, m(BX)
	MOVQ	SI, m_procid(CX)	// thread port is m->procid
	MOVQ	m_g0(CX), AX
	MOVQ	AX, g(BX)
	CALL	runtime·stackcheck(SB)	// smashes AX, CX
	CALL	DX	// fn
	CALL	runtime·exit1(SB)
	RET

// void bsdthread_register(void)
// registers callbacks for threadstart (see bsdthread_create above
// and wqthread and pthsize (not used).  returns 0 on success.
TEXT runtime·bsdthread_register(SB),7,$0
	MOVQ	$runtime·bsdthread_start(SB), DI	// threadstart
	MOVQ	$0, SI	// wqthread, not used by us
	MOVQ	$0, DX	// pthsize, not used by us
	MOVQ	$0, R10	// dummy_value [sic]
	MOVQ	$0, R8	// targetconc_ptr
	MOVQ	$0, R9	// dispatchqueue_offset
	MOVQ	$(0x2000000+366), AX	// bsdthread_register
	SYSCALL
	JCC 2(PC)
	CALL	runtime·notok(SB)
	RET

// Mach system calls use 0x1000000 instead of the BSD's 0x2000000.

// uint32 mach_msg_trap(void*, uint32, uint32, uint32, uint32, uint32, uint32)
TEXT runtime·mach_msg_trap(SB),7,$0
	MOVQ	8(SP), DI
	MOVL	16(SP), SI
	MOVL	20(SP), DX
	MOVL	24(SP), R10
	MOVL	28(SP), R8
	MOVL	32(SP), R9
	MOVL	36(SP), R11
	PUSHQ	R11	// seventh arg, on stack
	MOVL	$(0x1000000+31), AX	// mach_msg_trap
	SYSCALL
	POPQ	R11
	RET

TEXT runtime·mach_task_self(SB),7,$0
	MOVL	$(0x1000000+28), AX	// task_self_trap
	SYSCALL
	RET

TEXT runtime·mach_thread_self(SB),7,$0
	MOVL	$(0x1000000+27), AX	// thread_self_trap
	SYSCALL
	RET

TEXT runtime·mach_reply_port(SB),7,$0
	MOVL	$(0x1000000+26), AX	// mach_reply_port
	SYSCALL
	RET

// Mach provides trap versions of the semaphore ops,
// instead of requiring the use of RPC.

// uint32 mach_semaphore_wait(uint32)
TEXT runtime·mach_semaphore_wait(SB),7,$0
	MOVL	8(SP), DI
	MOVL	$(0x1000000+36), AX	// semaphore_wait_trap
	SYSCALL
	RET

// uint32 mach_semaphore_timedwait(uint32, uint32, uint32)
TEXT runtime·mach_semaphore_timedwait(SB),7,$0
	MOVL	8(SP), DI
	MOVL	12(SP), SI
	MOVL	16(SP), DX
	MOVL	$(0x1000000+38), AX	// semaphore_timedwait_trap
	SYSCALL
	RET

// uint32 mach_semaphore_signal(uint32)
TEXT runtime·mach_semaphore_signal(SB),7,$0
	MOVL	8(SP), DI
	MOVL	$(0x1000000+33), AX	// semaphore_signal_trap
	SYSCALL
	RET

// uint32 mach_semaphore_signal_all(uint32)
TEXT runtime·mach_semaphore_signal_all(SB),7,$0
	MOVL	8(SP), DI
	MOVL	$(0x1000000+34), AX	// semaphore_signal_all_trap
	SYSCALL
	RET

// set tls base to DI
TEXT runtime·settls(SB),7,$32
	/*
	* Same as in ../386/sys.s:/ugliness, different constant.
	* See ../../../../libcgo/darwin_amd64.c for the derivation
	* of the constant.
	*/
	SUBQ $0x8a0, DI

	MOVL	$(0x3000000+3), AX	// thread_fast_set_cthread_self - machdep call #3
	SYSCALL
	RET