<!-- Effective Go -->

<h2 id="introduction">Introduction</h2>

<p>
Go is a new language.  Although it borrows ideas from
existing languages,
it has unusual properties that make effective Go programs
different in character from programs written in its relatives.
A straightforward translation of a C++ or Java program into Go
is unlikely to produce a satisfactory result&mdash;Java programs
are written in Java, not Go.
On the other hand, thinking about the problem from a Go
perspective could produce a successful but quite different
program.
In other words,
to write Go well, it's important to understand its properties
and idioms.
It's also important to know the established conventions for
programming in Go, such as naming, formatting, program
construction, and so on, so that programs you write
will be easy for other Go programmers to understand.
</p>

<p>
This document gives tips for writing clear, idiomatic Go code.
It augments the <a href="go_spec.html">language specification</a>
and the <a href="go_tutorial.html">tutorial</a>, both of which you
should read first.
</p>

<h3 id="examples">Examples</h3>

<p>
The <a href="/src/pkg/">Go package sources</a>
are intended to serve not
only as the core library but also as examples of how to
use the language.
If you have a question about how to approach a problem or how something
might be implemented, they can provide answers, ideas and
background.
</p>


<h2 id="formatting">Formatting</h2>

<p>
Formatting issues are the most contentious
but the least consequential.
People can adapt to different formatting styles
but it's better if they don't have to, and
less time is devoted to the topic
if everyone adheres to the same style.
The problem is how to approach this Utopia without a long
prescriptive style guide.
</p>

<p>
With Go we take an unusual
approach and let the machine
take care of most formatting issues.
A program, <code>gofmt</code>, reads a Go program
and emits the source in a standard style of indentation
and vertical alignment, retaining and if necessary
reformatting comments.
If you want to know how to handle some new layout
situation, run <code>gofmt</code>; if the answer doesn't
seem right, fix the program (or file a bug), don't work around it.
</p>

<p>
As an example, there's no need to spend time lining up
the comments on the fields of a structure.
<code>Gofmt</code> will do that for you.  Given the
declaration
</p>

<pre>
type T struct {
    name string // name of the object
    value int // its value
}
</pre>

<p>
<code>gofmt</code> will line up the columns:
</p>

<pre>
type T struct {
    name    string // name of the object
    value   int    // its value
}
</pre>

<p>
All code in the libraries has been formatted with <code>gofmt</code>.
</p>


<p>
Some formatting details remain.  Very briefly,
</p>

<dl>
    <dt>Indentation</dt>
    <dd>We use tabs for indentation and <code>gofmt</code> emits them by default.
    Use spaces only if you must.
    </dd>
    <dt>Line length</dt>
    <dd>
    Go has no line length limit.  Don't worry about overflowing a punched card.
    If a line feels too long, wrap it and indent with an extra tab.
    </dd>
    <dt>Parentheses</dt>
    <dd>
    Go needs fewer parentheses: control structures (<code>if</code>,
    <code>for</code>, <code>switch</code>) do not require parentheses in
    their syntax.
    Also, the operator precedence hierarchy is shorter and clearer, so
<pre>
x&lt;&lt;8 + y&lt;&lt;16
</pre>
    means what the spacing implies.
    </dd>
</dl>

<h2 id="commentary">Commentary</h2>

<p>
Go provides C-style <code>/* */</code> block comments
and C++-style <code>//</code> line comments.
Line comments are the norm;
block comments appear mostly as package comments and
are also useful to disable large swaths of code.
</p>

<p>
The program—and web server—<code>godoc</code> processes
Go source files to extract documentation about the contents of the
package.
Comments that appear before top-level declarations, with no intervening newlines,
are extracted along with the declaration to serve as explanatory text for the item.
The nature and style of these comments determines the
quality of the documentation <code>godoc</code> produces.
</p>

<p>
Every package should have a <i>package comment</i>, a block
comment preceding the package clause.
For multi-file packages, the package comment only needs to be
present in one file, and any one will do.
The package comment should introduce the package and
provide information relevant to the package as a whole.
It will appear first on the <code>godoc</code> page and
should set up the detailed documentation that follows.
</p>

<pre>
/*
    The regexp package implements a simple library for
    regular expressions.

    The syntax of the regular expressions accepted is:

    regexp:
        concatenation { '|' concatenation }
    concatenation:
        { closure }
    closure:
        term [ '*' | '+' | '?' ]
    term:
        '^'
        '$'
        '.'
        character
        '[' [ '^' ] character-ranges ']'
        '(' regexp ')'
*/
package regexp
</pre>

<p>
If the package is simple, the package comment can be brief.
</p>

<pre>
// The path package implements utility routines for
// manipulating slash-separated filename paths.
</pre>

<p>
Comments do not need extra formatting such as banners of stars.
The generated output may not even be presented in a fixed-width font, so don't depend
on spacing for alignment&mdash;<code>godoc</code>, like <code>gofmt</code>,
takes care of that.
Finally, the comments are uninterpreted plain text, so HTML and other
annotations such as <code>_this_</code> will reproduce <i>verbatim</i> and should
not be used.
</p>

<p>
Inside a package, any comment immediately preceding a top-level declaration
serves as a <i>doc comment</i> for that declaration.
Every exported (capitalized) name in a program should
have a doc comment.
</p>

<p>
Doc comments work best as complete sentences, which allow
a wide variety of automated presentations.
The first sentence should be a one-sentence summary that
starts with the name being declared.
</p>

<pre>
// Compile parses a regular expression and returns, if successful, a Regexp
// object that can be used to match against text.
func Compile(str string) (regexp *Regexp, error os.Error) {
</pre>

<p>
Go's declaration syntax allows grouping of declarations.
A single doc comment can introduce a group of related constants or variables.
Since the whole declaration is presented, such a comment can often be perfunctory.
</p>

<pre>
// Error codes returned by failures to parse an expression.
var (
    ErrInternal      = os.NewError("internal error")
    ErrUnmatchedLpar = os.NewError("unmatched '('")
    ErrUnmatchedRpar = os.NewError("unmatched ')'")
    ...
)
</pre>

<p>
Even for private names, grouping can also indicate relationships between items,
such as the fact that a set of variables is protected by a mutex.
</p>

<pre>
var (
    countLock   sync.Mutex
    inputCount  uint32
    outputCount uint32
    errorCount  uint32
)
</pre>

<h2 id="names">Names</h2>

<p>
Names are as important in Go as in any other language.
In some cases they even have semantic effect: for instance,
the visibility of a name outside a package is determined by whether its
first character is upper case.
It's therefore worth spending a little time talking about naming conventions
in Go programs.
</p>


<h3 id="package-names">Package names</h3>

<p>
When a package is imported, the package name becomes an accessor for the
contents.  After
</p>

<pre>
import "bytes"
</pre>

<p>
the importing package can talk about <code>bytes.Buffer</code>.  It's
helpful if everyone using the package can use the same name to refer to
its contents, which implies that the package name should be good:
short, concise, evocative.  By convention, packages are given
lower case, single-word names; there should be no need for underscores
or mixedCaps.
Err on the side of brevity, since everyone using your
package will be typing that name.
And don't worry about collisions <i>a priori</i>.
The package name is only the default name for imports; it need not be unique
across all source code, and in the rare case of a collision the
importing package can choose a different name to use locally.
In any case, confusion is rare because the file name in the import
determines just which package is being used.
</p>

<p>
Another convention is that the package name is the base name of
its source directory;
the package in <code>src/pkg/container/vector</code>
is imported as <code>"container/vector"</code> but has name <code>vector</code>,
not <code>container_vector</code> and not <code>containerVector</code>.
</p>

<p>
The importer of a package will use the name to refer to its contents
(the <code>import .</code> notation is intended mostly for tests and other
unusual situations), so exported names in the package can use that fact
to avoid stutter.
For instance, the buffered reader type in the <code>bufio</code> package is called <code>Reader</code>,
not <code>BufReader</code>, because users see it as <code>bufio.Reader</code>,
which is a clear, concise name.
Moreover,
because imported entities are always addressed with their package name, <code>bufio.Reader</code>
does not conflict with <code>io.Reader</code>.
Similarly, the function to make new instances of <code>ring.Ring</code>&mdash;which
is the definition of a <em>constructor</em> in Go&mdash;would
normally be called <code>NewRing</code>, but since
<code>Ring</code> is the only type exported by the package, and since the
package is called <code>ring</code>, it's called just <code>New</code>.
Clients of the package see that as <code>ring.New</code>.
Use the package structure to help you choose good names.
</p>

<p>
Another short example is <code>once.Do</code>;
<code>once.Do(setup)</code> reads well and would not be improved by
writing <code>once.DoOrWaitUntilDone(setup)</code>.
Long names don't automatically make things more readable.
If the name represents something intricate or subtle, it's usually better
to write a helpful doc comment than to attempt to put all the information
into the name.
</p>

<h3 id="interface-names">Interface names</h3>

<p>
By convention, one-method interfaces are named by
the method name plus the -er suffix: <code>Reader</code>,
<code>Writer</code>, <code>Formatter</code> etc.
</p>

<p>
There are a number of such names and it's productive to honor them and the function
names they capture.
<code>Read</code>, <code>Write</code>, <code>Close</code>, <code>Flush</code>,
<code>String</code> and so on have
canonical signatures and meanings.  To avoid confusion,
don't give your method one of those names unless it
has the same signature and meaning.
Conversely, if your type implements a method with the
same meaning as a method on a well-known type,
give it the same name and signature;
call your string-converter method <code>String</code> not <code>ToString</code>.
</p>

<h3 id="mixed-caps">MixedCaps</h3>

<p>
Finally, the convention in Go is to use <code>MixedCaps</code>
or <code>mixedCaps</code> rather than underscores to write
multiword names.
</p>

<h2 id="semicolons">Semicolons</h2>

<p>
Like C, Go's formal grammar uses semicolons to terminate statements;
unlike C, those semicolons do not appear in the source.
Instead the lexer uses a simple rule to insert semicolons automatically
as it scans, so the input text is mostly free of them.
</p>

<p>
The rule is this. If the last token before a newline is an identifier
(which includes words like <code>int</code> and <code>float64</code>),
a basic literal such as a number or string constant, or one of the
tokens
</p>
<pre>
break continue fallthrough return ++ -- ) }
</pre>
<p>
the lexer always inserts a semicolon after the token.
This could be summarized as, &ldquo;if the newline comes
after a token that could end a statement, add a semicolon&rdquo;.
</p>

<p>
A semicolon can also be omitted immediately before a closing brace,
so a statement such as
</p>
<pre>
    go func() { for { dst &lt;- &lt;-src } }()
</pre>
<p>
needs no semicolons.
Idiomatic Go programs have semicolons only in places such as
<code>for</code> loop clauses, to separate the initializer, condition, and
continuation elements.  They are also necessary to separate multiple
statements on a line, should you write code that way.
</p>

<p>
One caveat. You should never put the opening brace of a
control structure (<code>if</code>, <code>for</code>, <code>switch</code>,
or <code>select</code>) on the next line.  If you do, a semicolon
will be inserted before the brace, which could cause unwanted
effects.  Write them like this
</p>

<pre>
if i &lt; f() {
    g()
}
</pre>
<p>
not like this
</p>
<pre>
if i &lt; f()  // wrong!
{           // wrong!
    g()
}
</pre>


<h2 id="control-structures">Control structures</h2>

<p>
The control structures of Go are related to those of C but differ
in important ways.
There is no <code>do</code> or <code>while</code> loop, only a
slightly generalized
<code>for</code>;
<code>switch</code> is more flexible;
<code>if</code> and <code>switch</code> accept an optional
initialization statement like that of <code>for</code>;
and there are new control structures including a type switch and a
multiway communications multiplexer, <code>select</code>.
The syntax is also slightly different:
parentheses are not required
and the bodies must always be brace-delimited.
</p>

<h3 id="if">If</h3>

<p>
In Go a simple <code>if</code> looks like this:
</p>
<pre>
if x &gt; 0 {
    return y
}
</pre>

<p>
Mandatory braces encourage writing simple <code>if</code> statements
on multiple lines.  It's good style to do so anyway,
especially when the body contains a control statement such as a
<code>return</code> or <code>break</code>.
</p>

<p>
Since <code>if</code> and <code>switch</code> accept an initialization
statement, it's common to see one used to set up a local variable.
</p>

<pre>
if err := file.Chmod(0664); err != nil {
    log.Print(err)
    return err
}
</pre>

<p id="else">
In the Go libraries, you'll find that
when an <code>if</code> statement doesn't flow into the next statement—that is,
the body ends in <code>break</code>, <code>continue</code>,
<code>goto</code>, or <code>return</code>—the unnecessary
<code>else</code> is omitted.
</p>

<pre>
f, err := os.Open(name, os.O_RDONLY, 0)
if err != nil {
    return err
}
codeUsing(f)
</pre>

<p>
This is a example of a common situation where code must analyze a
sequence of error possibilities.  The code reads well if the
successful flow of control runs down the page, eliminating error cases
as they arise.  Since error cases tend to end in <code>return</code>
statements, the resulting code needs no <code>else</code> statements.
</p>

<pre>
f, err := os.Open(name, os.O_RDONLY, 0)
if err != nil {
    return err
}
d, err := f.Stat()
if err != nil {
    return err
}
codeUsing(f, d)
</pre>


<h3 id="for">For</h3>

<p>
The Go <code>for</code> loop is similar to&mdash;but not the same as&mdash;C's.
It unifies <code>for</code>
and <code>while</code> and there is no <code>do-while</code>.
There are three forms, only one of which has semicolons.
</p>
<pre>
// Like a C for
for init; condition; post { }

// Like a C while
for condition { }

// Like a C for(;;)
for { }
</pre>

<p>
Short declarations make it easy to declare the index variable right in the loop.
</p>
<pre>
sum := 0
for i := 0; i &lt; 10; i++ {
    sum += i
}
</pre>

<p>
If you're looping over an array, slice, string, or map,
or reading from a channel, a <code>range</code> clause can
manage the loop for you.
</p>
<pre>
var m map[string]int
sum := 0
for _, value := range m {  // key is unused
    sum += value
}
</pre>

<p>
For strings, the <code>range</code> does more work for you, breaking out individual
Unicode characters by parsing the UTF-8 (erroneous encodings consume one byte and produce the
replacement rune U+FFFD). The loop
</p>
<pre>
for pos, char := range "日本語" {
    fmt.Printf("character %c starts at byte position %d\n", char, pos)
}
</pre>
<p>
prints
</p>
<pre>
character 日 starts at byte position 0
character 本 starts at byte position 3
character 語 starts at byte position 6
</pre>

<p>
Finally, since Go has no comma operator and <code>++</code> and <code>--</code>
are statements not expressions, if you want to run multiple variables in a <code>for</code>
you should use parallel assignment.
</p>
<pre>
// Reverse a
for i, j := 0, len(a)-1; i &lt; j; i, j = i+1, j-1 {
    a[i], a[j] = a[j], a[i]
}
</pre>

<h3 id="switch">Switch</h3>

<p>
Go's <code>switch</code> is more general than C's.
The expressions need not be constants or even integers,
the cases are evaluated top to bottom until a match is found,
and if the <code>switch</code> has no expression it switches on
<code>true</code>.
It's therefore possible&mdash;and idiomatic&mdash;to write an
<code>if</code>-<code>else</code>-<code>if</code>-<code>else</code>
chain as a <code>switch</code>.
</p>

<pre>
func unhex(c byte) byte {
    switch {
    case '0' &lt;= c &amp;&amp; c &lt;= '9':
        return c - '0'
    case 'a' &lt;= c &amp;&amp; c &lt;= 'f':
        return c - 'a' + 10
    case 'A' &lt;= c &amp;&amp; c &lt;= 'F':
        return c - 'A' + 10
    }
    return 0
}
</pre>

<p>
There is no automatic fall through, but cases can be presented
in comma-separated lists.
<pre>
func shouldEscape(c byte) bool {
    switch c {
    case ' ', '?', '&amp;', '=', '#', '+', '%':
        return true
    }
    return false
}
</pre>

<p>
Here's a comparison routine for byte arrays that uses two
<code>switch</code> statements:
<pre>
// Compare returns an integer comparing the two byte arrays
// lexicographically.
// The result will be 0 if a == b, -1 if a &lt; b, and +1 if a &gt; b
func Compare(a, b []byte) int {
    for i := 0; i &lt; len(a) &amp;&amp; i &lt; len(b); i++ {
        switch {
        case a[i] &gt; b[i]:
            return 1
        case a[i] &lt; b[i]:
            return -1
        }
    }
    switch {
    case len(a) &lt; len(b):
        return -1
    case len(a) &gt; len(b):
        return 1
    }
    return 0
}
</pre>

<p>
A switch can also be used to discover the dynamic type of an interface
variable.  Such a <em>type switch</em> uses the syntax of a type
assertion with the keyword <code>type</code> inside the parentheses.
If the switch declares a variable in the expression, the variable will
have the corresponding type in each clause.
</p>
<pre>
switch t := interfaceValue.(type) {
default:
    fmt.Printf("unexpected type %T", t)  // %T prints type
case bool:
    fmt.Printf("boolean %t\n", t)
case int:
    fmt.Printf("integer %d\n", t)
case *bool:
    fmt.Printf("pointer to boolean %t\n", *t)
case *int:
    fmt.Printf("pointer to integer %d\n", *t)
}
</pre>

<h2 id="functions">Functions</h2>

<h3 id="multiple-returns">Multiple return values</h3>

<p>
One of Go's unusual features is that functions and methods
can return multiple values.  This can be used to
improve on a couple of clumsy idioms in C programs: in-band
error returns (such as <code>-1</code> for <code>EOF</code>)
and modifying an argument.
</p>

<p>
In C, a write error is signaled by a negative count with the
error code secreted away in a volatile location.
In Go, <code>Write</code>
can return a count <i>and</i> an error: &ldquo;Yes, you wrote some
bytes but not all of them because you filled the device&rdquo;.
The signature of <code>*File.Write</code> in package <code>os</code> is:
</p>

<pre>
func (file *File) Write(b []byte) (n int, err Error)
</pre>

<p>
and as the documentation says, it returns the number of bytes
written and a non-nil <code>Error</code> when <code>n</code>
<code>!=</code> <code>len(b)</code>.
This is a common style; see the section on error handling for more examples.
</p>

<p>
A similar approach obviates the need to pass a pointer to a return
value to simulate a reference parameter.
Here's a simple-minded function to
grab a number from a position in a byte array, returning the number
and the next position.
</p>

<pre>
func nextInt(b []byte, i int) (int, int) {
    for ; i &lt; len(b) &amp;&amp; !isDigit(b[i]); i++ {
    }
    x := 0
    for ; i &lt; len(b) &amp;&amp; isDigit(b[i]); i++ {
        x = x*10 + int(b[i])-'0'
    }
    return x, i
}
</pre>

<p>
You could use it to scan the numbers in an input array <code>a</code> like this:
</p>

<pre>
    for i := 0; i &lt; len(a); {
        x, i = nextInt(a, i)
        fmt.Println(x)
    }
</pre>

<h3 id="named-results">Named result parameters</h3>

<p>
The return or result "parameters" of a Go function can be given names and
used as regular variables, just like the incoming parameters.
When named, they are initialized to the zero values for their types when
the function begins; if the function executes a <code>return</code> statement
with no arguments, the current values of the result parameters are
used as the returned values.
</p>

<p>
The names are not mandatory but they can make code shorter and clearer:
they're documentation.
If we name the results of <code>nextInt</code> it becomes
obvious which returned <code>int</code>
is which.
</p>

<pre>
func nextInt(b []byte, pos int) (value, nextPos int) {
</pre>

<p>
Because named results are initialized and tied to an unadorned return, they can simplify
as well as clarify.  Here's a version
of <code>io.ReadFull</code> that uses them well:
</p>

<pre>
func ReadFull(r Reader, buf []byte) (n int, err os.Error) {
    for len(buf) &gt; 0 &amp;&amp; err == nil {
        var nr int
        nr, err = r.Read(buf)
        n += nr
        buf = buf[nr:len(buf)]
    }
    return
}
</pre>

<h3 id="defer">Defer</h3>

<p>
Go's <code>defer</code> statement schedules a function call (the
<i>deferred</i> function) to be run immediately before the function
executing the <code>defer</code> returns.  It's an unusual but
effective way to deal with situations such as resources that must be
released regardless of which path a function takes to return.  The
canonical examples are unlocking a mutex or closing a file.
</p>

<pre>
// Contents returns the file's contents as a string.
func Contents(filename string) (string, os.Error) {
    f, err := os.Open(filename, os.O_RDONLY, 0)
    if err != nil {
        return "", err
    }
    defer f.Close()  // f.Close will run when we're finished.

    var result []byte
    buf := make([]byte, 100)
    for {
        n, err := f.Read(buf[0:])
        result = append(result, buf[0:n]...) // append is discussed later.
        if err != nil {
            if err == os.EOF {
                break
            }
            return "", err  // f will be closed if we return here.
        }
    }
    return string(result), nil // f will be closed if we return here.
}
</pre>

<p>
Deferring a function like this has two advantages.  First, it
guarantees that you will never forget to close the file, a mistake
that's easy to make if you later edit the function to add a new return
path.  Second, it means that the close sits near the open,
which is much clearer than placing it at the end of the function.
</p>

<p>
The arguments to the deferred function (which include the receiver if
the function is a method) are evaluated when the <i>defer</i>
executes, not when the <i>call</i> executes.  Besides avoiding worries
about variables changing values as the function executes, this means
that a single deferred call site can defer multiple function
executions.  Here's a silly example.
</p>

<pre>
for i := 0; i < 5; i++ {
    defer fmt.Printf("%d ", i)
}
</pre>

<p>
Deferred functions are executed in LIFO order, so this code will cause
<code>4 3 2 1 0</code> to be printed when the function returns.  A
more plausible example is a simple way to trace function execution
through the program.  We could write a couple of simple tracing
routines like this:
</p>

<pre>
func trace(s string)   { fmt.Println("entering:", s) }
func untrace(s string) { fmt.Println("leaving:", s) }

// Use them like this:
func a() {
    trace("a")
    defer untrace("a")
    // do something....
}
</pre>

<p>
We can do better by exploiting the fact that arguments to deferred
functions are evaluated when the <code>defer</code> executes.  The
tracing routine can set up the argument to the untracing routine.
This example:
</p>

<pre>
func trace(s string) string {
    fmt.Println("entering:", s)
    return s
}

func un(s string) {
    fmt.Println("leaving:", s)
}

func a() {
    defer un(trace("a"))
    fmt.Println("in a")
}

func b() {
    defer un(trace("b"))
    fmt.Println("in b")
    a()
}

func main() {
    b()
}
</pre>

<p>
prints
</p>

<pre>
entering: b
in b
entering: a
in a
leaving: a
leaving: b
</pre>

<p>
For programmers accustomed to block-level resource management from
other languages, <code>defer</code> may seem peculiar, but its most
interesting and powerful applications come precisely from the fact
that it's not block-based but function based.  In the section on
<code>panic</code> and <code>recover</code> we'll see an example.
</p>

<h2 id="data">Data</h2>

<h3 id="allocation_new">Allocation with <code>new()</code></h3>

<p>
Go has two allocation primitives, <code>new()</code> and <code>make()</code>.
They do different things and apply to different types, which can be confusing,
but the rules are simple.
Let's talk about <code>new()</code> first.
It's a built-in function essentially the same as its namesakes
in other languages: <code>new(T)</code> allocates zeroed storage for a new item of type
<code>T</code> and returns its address, a value of type <code>*T</code>.
In Go terminology, it returns a pointer to a newly allocated zero value of type
<code>T</code>.
</p>

<p>
Since the memory returned by <code>new()</code> is zeroed, it's helpful to arrange that the
zeroed object can be used without further initialization.  This means a user of
the data structure can create one with <code>new()</code> and get right to
work.
For example, the documentation for <code>bytes.Buffer</code> states that
"the zero value for <code>Buffer</code> is an empty buffer ready to use."
Similarly, <code>sync.Mutex</code> does not
have an explicit constructor or <code>Init</code> method.
Instead, the zero value for a <code>sync.Mutex</code>
is defined to be an unlocked mutex.
</p>

<p>
The zero-value-is-useful property works transitively. Consider this type declaration.
</p>

<pre>
type SyncedBuffer struct {
    lock    sync.Mutex
    buffer  bytes.Buffer
}
</pre>

<p>
Values of type <code>SyncedBuffer</code> are also ready to use immediately upon allocation
or just declaration.  In this snippet, both <code>p</code> and <code>v</code> will work
correctly without further arrangement.
</p>

<pre>
p := new(SyncedBuffer)  // type *SyncedBuffer
var v SyncedBuffer      // type  SyncedBuffer
</pre>

<h3 id="composite_literals">Constructors and composite literals</h3>

<p>
Sometimes the zero value isn't good enough and an initializing
constructor is necessary, as in this example derived from
package <code>os</code>.
</p>

<pre>
func NewFile(fd int, name string) *File {
    if fd &lt; 0 {
        return nil
    }
    f := new(File)
    f.fd = fd
    f.name = name
    f.dirinfo = nil
    f.nepipe = 0
    return f
}
</pre>

<p>
There's a lot of boiler plate in there.  We can simplify it
using a <i>composite literal</i>, which is
an expression that creates a
new instance each time it is evaluated.
</p>


<pre>
func NewFile(fd int, name string) *File {
    if fd &lt; 0 {
        return nil
    }
    f := File{fd, name, nil, 0}
    return &amp;f
}
</pre>

<p>
Note that it's perfectly OK to return the address of a local variable;
the storage associated with the variable survives after the function
returns.
In fact, taking the address of a composite literal
allocates a fresh instance each time it is evaluated,
so we can combine these last two lines.
</p>

<pre>
    return &amp;File{fd, name, nil, 0}
</pre>

<p>
The fields of a composite literal are laid out in order and must all be present.
However, by labeling the elements explicitly as <i>field</i><code>:</code><i>value</i>
pairs, the initializers can appear in any
order, with the missing ones left as their respective zero values.  Thus we could say
</p>

<pre>
    return &amp;File{fd: fd, name: name}
</pre>

<p>
As a limiting case, if a composite literal contains no fields at all, it creates
a zero value for the type.  The expressions <code>new(File)</code> and <code>&amp;File{}</code> are equivalent.
</p>

<p>
Composite literals can also be created for arrays, slices, and maps,
with the field labels being indices or map keys as appropriate.
In these examples, the initializations work regardless of the values of <code>Enone</code>,
<code>Eio</code>, and <code>Einval</code>, as long as they are distinct.
</p>

<pre>
a := [...]string   {Enone: "no error", Eio: "Eio", Einval: "invalid argument"}
s := []string      {Enone: "no error", Eio: "Eio", Einval: "invalid argument"}
m := map[int]string{Enone: "no error", Eio: "Eio", Einval: "invalid argument"}
</pre>

<h3 id="allocation_make">Allocation with <code>make()</code></h3>

<p>
Back to allocation.
The built-in function <code>make(T, </code><i>args</i><code>)</code> serves
a purpose different from <code>new(T)</code>.
It creates slices, maps, and channels only, and it returns an initialized (not zero)
value of type <code>T</code>, not <code>*T</code>.
The reason for the distinction
is that these three types are, under the covers, references to data structures that
must be initialized before use.
A slice, for example, is a three-item descriptor
containing a pointer to the data (inside an array), the length, and the
capacity; until those items are initialized, the slice is <code>nil</code>.
For slices, maps, and channels,
<code>make</code> initializes the internal data structure and prepares
the value for use.
For instance,
</p>

<pre>
make([]int, 10, 100)
</pre>

<p>
allocates an array of 100 ints and then creates a slice
structure with length 10 and a capacity of 100 pointing at the first
10 elements of the array.
(When making a slice, the capacity can be omitted; see the section on slices
for more information.)
In contrast, <code>new([]int)</code> returns a pointer to a newly allocated, zeroed slice
structure, that is, a pointer to a <code>nil</code> slice value.

<p>
These examples illustrate the difference between <code>new()</code> and
<code>make()</code>.
</p>

<pre>
var p *[]int = new([]int)       // allocates slice structure; *p == nil; rarely useful
var v  []int = make([]int, 100) // the slice v now refers to a new array of 100 ints

// Unnecessarily complex:
var p *[]int = new([]int)
*p = make([]int, 100, 100)

// Idiomatic:
v := make([]int, 100)
</pre>

<p>
Remember that <code>make()</code> applies only to maps, slices and channels
and does not return a pointer.
To obtain an explicit pointer allocate with <code>new()</code>.
</p>

<h3 id="arrays">Arrays</h3>

<p>
Arrays are useful when planning the detailed layout of memory and sometimes
can help avoid allocation, but primarily
they are a building block for slices, the subject of the next section.
To lay the foundation for that topic, here are a few words about arrays.
</p>

<p>
There are major differences between the ways arrays work in Go and C.
In Go,
</p>
<ul>
<li>
Arrays are values. Assigning one array to another copies all the elements.
</li>
<li>
In particular, if you pass an array to a function, it
will receive a <i>copy</i> of the array, not a pointer to it.
<li>
The size of an array is part of its type.  The types <code>[10]int</code>
and <code>[20]int</code> are distinct.
</li>
</ul>

<p>
The value property can be useful but also expensive; if you want C-like behavior and efficiency,
you can pass a pointer to the array.
</p>

<pre>
func Sum(a *[3]float64) (sum float64) {
    for _, v := range *a {
        sum += v
    }
    return
}

array := [...]float64{7.0, 8.5, 9.1}
x := Sum(&amp;array)  // Note the explicit address-of operator
</pre>

<p>
But even this style isn't idiomatic Go.  Slices are.
</p>

<h3 id="slices">Slices</h3>

<p>
Slices wrap arrays to give a more general, powerful, and convenient
interface to sequences of data.  Except for items with explicit
dimension such as transformation matrices, most array programming in
Go is done with slices rather than simple arrays.
</p>
<p>
Slices are <i>reference types</i>, which means that if you assign one
slice to another, both refer to the same underlying array.  For
instance, if a function takes a slice argument, changes it makes to
the elements of the slice will be visible to the caller, analogous to
passing a pointer to the underlying array.  A <code>Read</code>
function can therefore accept a slice argument rather than a pointer
and a count; the length within the slice sets an upper
limit of how much data to read.  Here is the signature of the
<code>Read</code> method of the <code>File</code> type in package
<code>os</code>:
</p>
<pre>
func (file *File) Read(buf []byte) (n int, err os.Error)
</pre>
<p>
The method returns the number of bytes read and an error value, if
any.  To read into the first 32 bytes of a larger buffer
<code>b</code>, <i>slice</i> (here used as a verb) the buffer.
</p>
<pre>
    n, err := f.Read(buf[0:32])
</pre>
<p>
Such slicing is common and efficient.  In fact, leaving efficiency aside for
the moment, this snippet would also read the first 32 bytes of the buffer.
</p>
<pre>
    var n int
    var err os.Error
    for i := 0; i &lt; 32; i++ {
        nbytes, e := f.Read(buf[i:i+1])  // Read one byte.
        if nbytes == 0 || e != nil {
            err = e
            break
        }
        n += nbytes
    }
</pre>
<p>
The length of a slice may be changed as long as it still fits within
the limits of the underlying array; just assign it to a slice of
itself.  The <i>capacity</i> of a slice, accessible by the built-in
function <code>cap</code>, reports the maximum length the slice may
assume.  Here is a function to append data to a slice.  If the data
exceeds the capacity, the slice is reallocated.  The
resulting slice is returned.  The function uses the fact that
<code>len</code> and <code>cap</code> are legal when applied to the
<code>nil</code> slice, and return 0.
</p>
<pre>
func Append(slice, data[]byte) []byte {
    l := len(slice)
    if l + len(data) &gt; cap(slice) {  // reallocate
        // Allocate double what's needed, for future growth.
        newSlice := make([]byte, (l+len(data))*2)
        // The copy function is predeclared and works for any slice type.
        copy(newSlice, slice)
        slice = newSlice
    }
    slice = slice[0:l+len(data)]
    for i, c := range data {
        slice[l+i] = c
    }
    return slice
}
</pre>
<p>
We must return the slice afterwards because, although <code>Append</code>
can modify the elements of <code>slice</code>, the slice itself (the run-time data
structure holding the pointer, length, and capacity) is passed by value.
<p>
The idea of appending to a slice is so useful it's captured by the
<code>append</code> built-in function.  To understand that function's
design, though, we need a little more information, so we'll return
to it later.
</p>


<h3 id="maps">Maps</h3>

<p>
Maps are a convenient and powerful built-in data structure to associate
values of different types.
The key can be of any type for which the equality operator is defined,
such as integers,
floating point and complex numbers,
strings, pointers, and interfaces (as long as the dynamic type
supports equality).  Structs, arrays and slices cannot be used as map keys,
because equality is not defined on those types.
Like slices, maps are a reference type. If you pass a map to a function
that changes the contents of the map, the changes will be visible
in the caller.
</p>
<p>
Maps can be constructed using the usual composite literal syntax
with colon-separated key-value pairs,
so it's easy to build them during initialization.
</p>
<pre>
var timeZone = map[string] int {
    "UTC":  0*60*60,
    "EST": -5*60*60,
    "CST": -6*60*60,
    "MST": -7*60*60,
    "PST": -8*60*60,
}
</pre>
<p>
Assigning and fetching map values looks syntactically just like
doing the same for arrays except that the index doesn't need to
be an integer.
</p>
<pre>
offset := timeZone["EST"]
</pre>
<p>
An attempt to fetch a map value with a key that
is not present in the map will return the zero value for the type
of the entries
in the map.  For instance, if the map contains integers, looking
up a non-existent key will return <code>0</code>.
</p>
<p>
Sometimes you need to distinguish a missing entry from
a zero value.  Is there an entry for <code>"UTC"</code>
or is that zero value because it's not in the map at all?
You can discriminate with a form of multiple assignment.
</p>
<pre>
var seconds int
var ok bool
seconds, ok = timeZone[tz]
</pre>
<p>
For obvious reasons this is called the &ldquo;comma ok&rdquo; idiom.
In this example, if <code>tz</code> is present, <code>seconds</code>
will be set appropriately and <code>ok</code> will be true; if not,
<code>seconds</code> will be set to zero and <code>ok</code> will
be false.
Here's a function that puts it together with a nice error report:
</p>
<pre>
func offset(tz string) int {
    if seconds, ok := timeZone[tz]; ok {
        return seconds
    }
    log.Println("unknown time zone", tz)
    return 0
}
</pre>
<p>
To test for presence in the map without worrying about the actual value,
you can use the <em>blank identifier</em>, a simple underscore (<code>_</code>).
The blank identifier can be assigned or declared with any value of any type, with the
value discarded harmlessly.  For testing just presence in a map, use the blank
identifier in place of the usual variable for the value.
</p>
<pre>
_, present := timeZone[tz]
</pre>
<p>
To delete a map entry, turn the multiple assignment around by placing
an extra boolean on the right; if the boolean is false, the entry
is deleted. It's safe to do this even if the key is already absent
from the map.
</p>
<pre>
timeZone["PDT"] = 0, false  // Now on Standard Time
</pre>

<h3 id="printing">Printing</h3>

<p>
Formatted printing in Go uses a style similar to C's <code>printf</code>
family but is richer and more general. The functions live in the <code>fmt</code>
package and have capitalized names: <code>fmt.Printf</code>, <code>fmt.Fprintf</code>,
<code>fmt.Sprintf</code> and so on.  The string functions (<code>Sprintf</code> etc.)
return a string rather than filling in a provided buffer.
</p>
<p>
You don't need to provide a format string.  For each of <code>Printf</code>,
<code>Fprintf</code> and <code>Sprintf</code> there is another pair
of functions, for instance <code>Print</code> and <code>Println</code>.
These functions do not take a format string but instead generate a default
format for each argument. The <code>Println</code> versions also insert a blank
between arguments and append a newline to the output while
the <code>Print</code> versions add blanks only if the operand on neither side is a string.
In this example each line produces the same output.
</p>
<pre>
fmt.Printf("Hello %d\n", 23)
fmt.Fprint(os.Stdout, "Hello ", 23, "\n")
fmt.Println("Hello", 23)
fmt.Println(fmt.Sprint("Hello ", 23))
</pre>
<p>
As mentioned in
the <a href="go_tutorial.html">tutorial</a>, <code>fmt.Fprint</code>
and friends take as a first argument any object
that implements the <code>io.Writer</code> interface; the variables <code>os.Stdout</code>
and <code>os.Stderr</code> are familiar instances.
</p>
<p>
Here things start to diverge from C.  First, the numeric formats such as <code>%d</code>
do not take flags for signedness or size; instead, the printing routines use the
type of the argument to decide these properties.
</p>
<pre>
var x uint64 = 1&lt;&lt;64 - 1
fmt.Printf("%d %x; %d %x\n", x, x, int64(x), int64(x))
</pre>
<p>
prints
</p>
<pre>
18446744073709551615 ffffffffffffffff; -1 -1
</pre>
<p>
If you just want the default conversion, such as decimal for integers, you can use
the catchall format <code>%v</code> (for &ldquo;value&rdquo;); the result is exactly
what <code>Print</code> and <code>Println</code> would produce.
Moreover, that format can print <em>any</em> value, even arrays, structs, and
maps.  Here is a print statement for the time zone map defined in the previous section.
</p>
<pre>
fmt.Printf("%v\n", timeZone)  // or just fmt.Println(timeZone)
</pre>
<p>
which gives output
</p>
<pre>
map[CST:-21600 PST:-28800 EST:-18000 UTC:0 MST:-25200]
</pre>
<p>
For maps the keys may be output in any order, of course.
When printing a struct, the modified format <code>%+v</code> annotates the
fields of the structure with their names, and for any value the alternate
format <code>%#v</code> prints the value in full Go syntax.
</p>
<pre>
type T struct {
    a int
    b float
    c string
}
t := &amp;T{ 7, -2.35, "abc\tdef" }
fmt.Printf("%v\n", t)
fmt.Printf("%+v\n", t)
fmt.Printf("%#v\n", t)
fmt.Printf("%#v\n", timeZone)
</pre>
<p>
prints
</p>
<pre>
&amp;{7 -2.35 abc   def}
&amp;{a:7 b:-2.35 c:abc     def}
&amp;main.T{a:7, b:-2.35, c:"abc\tdef"}
map[string] int{"CST":-21600, "PST":-28800, "EST":-18000, "UTC":0, "MST":-25200}
</pre>
<p>
(Note the ampersands.)
That quoted string format is also available through <code>%q</code> when
applied to a value of type <code>string</code> or <code>[]byte</code>;
the alternate format <code>%#q</code> will use backquotes instead if possible.
Also, <code>%x</code> works on strings and arrays of bytes as well as on integers,
generating a long hexadecimal string, and with
a space in the format (<code>%&nbsp;x</code>) it puts spaces between the bytes.
</p>
<p>
Another handy format is <code>%T</code>, which prints the <em>type</em> of a value.
<pre>
fmt.Printf(&quot;%T\n&quot;, timeZone)
</pre>
<p>
prints
</p>
<pre>
map[string] int
</pre>
<p>
If you want to control the default format for a custom type, all that's required is to define
a method <code>String() string</code> on the type.
For our simple type <code>T</code>, that might look like this.
</p>
<pre>
func (t *T) String() string {
    return fmt.Sprintf("%d/%g/%q", t.a, t.b, t.c)
}
fmt.Printf("%v\n", t)
</pre>
<p>
to print in the format
</p>
<pre>
7/-2.35/"abc\tdef"
</pre>
<p>
Our <code>String()</code> method is able to call <code>Sprintf</code> because the
print routines are fully reentrant and can be used recursively.
We can even go one step further and pass a print routine's arguments directly to another such routine.
The signature of <code>Printf</code> uses the type <code>...interface{}</code>
for its final argument to specify that an arbitrary number of parameters (of arbitrary type)
can appear after the format.
</p>
<pre>
func Printf(format string, v ...interface{}) (n int, errno os.Error) {
</pre>
<p>
Within the function <code>Printf</code>, <code>v</code> acts like a variable of type
<code>[]interface{}</code> but if it is passed to another variadic function, it acts like
a regular list of arguments.
Here is the implementation of the
function <code>log.Println</code> we used above. It passes its arguments directly to
<code>fmt.Sprintln</code> for the actual formatting.
</p>
<pre>
// Println prints to the standard logger in the manner of fmt.Println.
func Println(v ...interface{}) {
    std.Output(2, fmt.Sprintln(v...))  // Output takes parameters (int, string)
}
</pre>
<p>
We write <code>...</code> after <code>v</code> in the nested call to <code>Sprintln</code> to tell the
compiler to treat <code>v</code> as a list of arguments; otherwise it would just pass
<code>v</code> as a single slice argument.
<p>
There's even more to printing than we've covered here.  See the <code>godoc</code> documentation
for package <code>fmt</code> for the details.
</p>
<p>
By the way, a <code>...</code> parameter can be of a specific type, for instance <code>...int</code>
for a min function that chooses the least of a list of integers:
</p>
<pre>
func Min(a ...int) int {
    min := int(^uint(0) >> 1)  // largest int
    for _, i := range a {
        if i < min {
            min = i
        }
    }
    return min
}
</pre>

<h3 id="append">Append</h3>
<p>
Now we have the missing piece we needed to explain the design of
the <code>append</code> built-in function.  The signature of <code>append</code>
is different from our custom <code>Append</code> function above.
Schematically, it's like this:
<pre>
func append(slice []<i>T</i>, elements...T) []<i>T</i>
</pre>
where <i>T</i> is a placeholder for any given type.  You can't
actually write a function in Go where the type <code>T</code>
is determined by the caller.
That's why <code>append</code> is built in: it needs support from the
compiler.
<p>
What <code>append</code> does is append the elements to the end of
the slice and return the result.  The result needs to be returned
because, as with our hand-written <code>Append</code>, the underlying
array may change.  This simple example
<pre>
x := []int{1,2,3}
x = append(x, 4, 5, 6)
fmt.Println(x)
</pre>
prints <code>[1 2 3 4 5 6]</code>.  So <code>append</code> works a
little like <code>Printf</code>, collecting an arbitrary number of
arguments.
<p>
But what if we wanted to do what our <code>Append</code> does and
append a slice to a slice?  Easy: use <code>...</code> at the call
site, just as we did in the call to <code>Output</code> above.  This
snippet produces identical output to the one above.
<pre>
x := []int{1,2,3}
y := []int{4,5,6}
x = append(x, y...)
fmt.Println(x)
</pre>
Without that <code>...</code>, it wouldn't compile because the types
would be wrong; <code>y</code> is not of type <code>int</code>.

<h2 id="initialization">Initialization</h2>

<p>
Although it doesn't look superficially very different from
initialization in C or C++, initialization in Go is more powerful.
Complex structures can be built during initialization and the ordering
issues between initialized objects in different packages are handled
correctly.
</p>

<h3 id="constants">Constants</h3>

<p>
Constants in Go are just that&mdash;constant.
They are created at compile time, even when defined as
locals in functions,
and can only be numbers, strings or booleans.
Because of the compile-time restriction, the expressions
that define them must be constant expressions,
evaluatable by the compiler.  For instance,
<code>1&lt;&lt;3</code> is a constant expression, while
<code>math.Sin(math.Pi/4)</code> is not because
the function call to <code>math.Sin</code> needs
to happen at run time.
</p>

<p>
In Go, enumerated constants are created using the <code>iota</code>
enumerator.  Since <code>iota</code> can be part of an expression and
expressions can be implicitly repeated, it is easy to build intricate
sets of values.
</p>
<pre>
type ByteSize float64
const (
    _ = iota  // ignore first value by assigning to blank identifier
    KB ByteSize = 1&lt;&lt;(10*iota)
    MB
    GB
    TB
    PB
    EB
    ZB
    YB
)
</pre>
<p>
The ability to attach a method such as <code>String</code> to a
type makes it possible for such values to format themselves
automatically for printing, even as part of a general type.
</p>
<pre>
func (b ByteSize) String() string {
    switch {
    case b &gt;= YB:
        return fmt.Sprintf("%.2fYB", float64(b/YB))
    case b &gt;= ZB:
        return fmt.Sprintf("%.2fZB", float64(b/ZB))
    case b &gt;= EB:
        return fmt.Sprintf("%.2fEB", float64(b/EB))
    case b &gt;= PB:
        return fmt.Sprintf("%.2fPB", float64(b/PB))
    case b &gt;= TB:
        return fmt.Sprintf("%.2fTB", float64(b/TB))
    case b &gt;= GB:
        return fmt.Sprintf("%.2fGB", float64(b/GB))
    case b &gt;= MB:
        return fmt.Sprintf("%.2fMB", float64(b/MB))
    case b &gt;= KB:
        return fmt.Sprintf("%.2fKB", float64(b/KB))
    }
    return fmt.Sprintf("%.2fB", float64(b))
}
</pre>
<p>
(The <code>float64</code> conversions prevent <code>Sprintf</code> 
from recurring back through the <code>String</code> method for 
<code>ByteSize</code>.)
The expression <code>YB</code> prints as <code>1.00YB</code>,
while <code>ByteSize(1e13)</code> prints as <code>9.09TB</code>.
</p>

<h3 id="variables">Variables</h3>

<p>
Variables can be initialized just like constants but the
initializer can be a general expression computed at run time.
</p>
<pre>
var (
    HOME = os.Getenv("HOME")
    USER = os.Getenv("USER")
    GOROOT = os.Getenv("GOROOT")
)
</pre>

<h3 id="init">The init function</h3>

<p>
Finally, each source file can define its own <code>init()</code> function to
set up whatever state is required.  The only restriction is that, although
goroutines can be launched during initialization, they will not begin
execution until it completes; initialization always runs as a single thread
of execution.
And finally means finally: <code>init()</code> is called after all the
variable declarations in the package have evaluated their initializers,
and those are evaluated only after all the imported packages have been
initialized.
</p>
<p>
Besides initializations that cannot be expressed as declarations,
a common use of <code>init()</code> functions is to verify or repair
correctness of the program state before real execution begins.
</p>

<pre>
func init() {
    if USER == "" {
        log.Exit("$USER not set")
    }
    if HOME == "" {
        HOME = "/usr/" + USER
    }
    if GOROOT == "" {
        GOROOT = HOME + "/go"
    }
    // GOROOT may be overridden by --goroot flag on command line.
    flag.StringVar(&amp;GOROOT, "goroot", GOROOT, "Go root directory")
}
</pre>

<h2 id="methods">Methods</h2>

<h3 id="pointers_vs_values">Pointers vs. Values</h3>
<p>
Methods can be defined for any named type that is not a pointer or an interface;
the receiver does not have to be a struct.
<p>
In the discussion of slices above, we wrote an <code>Append</code>
function.  We can define it as a method on slices instead.  To do
this, we first declare a named type to which we can bind the method, and
then make the receiver for the method a value of that type.
</p>
<pre>
type ByteSlice []byte

func (slice ByteSlice) Append(data []byte) []byte {
    // Body exactly the same as above
}
</pre>
<p>
This still requires the method to return the updated slice.  We can
eliminate that clumsiness by redefining the method to take a
<i>pointer</i> to a <code>ByteSlice</code> as its receiver, so the
method can overwrite the caller's slice.
</p>
<pre>
func (p *ByteSlice) Append(data []byte) {
    slice := *p
    // Body as above, without the return.
    *p = slice
}
</pre>
<p>
In fact, we can do even better.  If we modify our function so it looks
like a standard <code>Write</code> method, like this,
</p>
<pre>
func (p *ByteSlice) Write(data []byte) (n int, err os.Error) {
    slice := *p
    // Again as above.
    *p = slice
    return len(data), nil
}
</pre>
<p>
then the type <code>*ByteSlice</code> satisfies the standard interface
<code>io.Writer</code>, which is handy.  For instance, we can
print into one.
</p>
<pre>
    var b ByteSlice
    fmt.Fprintf(&amp;b, "This hour has %d days\n", 7)
</pre>
<p>
We pass the address of a <code>ByteSlice</code>
because only <code>*ByteSlice</code> satisfies <code>io.Writer</code>.
The rule about pointers vs. values for receivers is that value methods
can be invoked on pointers and values, but pointer methods can only be
invoked on pointers.  This is because pointer methods can modify the
receiver; invoking them on a copy of the value would cause those
modifications to be discarded.
</p>
<p>
By the way, the idea of using <code>Write</code> on a slice of bytes
is implemented by <code>bytes.Buffer</code>.
</p>

<h2 id="interfaces_and_types">Interfaces and other types</h2>

<h3 id="interfaces">Interfaces</h3>
<p>
Interfaces in Go provide a way to specify the behavior of an
object: if something can do <em>this</em>, then it can be used
<em>here</em>.  We've seen a couple of simple examples already;
custom printers can be implemented by a <code>String</code> method
while <code>Fprintf</code> can generate output to anything
with a <code>Write</code> method.
Interfaces with only one or two methods are common in Go code, and are
usually given a name derived from the method, such as <code>io.Writer</code>
for something that implements <code>Write</code>.
</p>
<p>
A type can implement multiple interfaces.
For instance, a collection can be sorted
by the routines in package <code>sort</code> if it implements
<code>sort.Interface</code>, which contains <code>Len()</code>,
<code>Less(i, j int) bool</code>, and <code>Swap(i, j int)</code>,
and it could also have a custom formatter.
In this contrived example <code>Sequence</code> satisfies both.
</p>
<pre>
type Sequence []int

// Methods required by sort.Interface.
func (s Sequence) Len() int {
    return len(s)
}
func (s Sequence) Less(i, j int) bool {
    return s[i] &lt; s[j]
}
func (s Sequence) Swap(i, j int) {
    s[i], s[j] = s[j], s[i]
}

// Method for printing - sorts the elements before printing.
func (s Sequence) String() string {
    sort.Sort(s)
    str := "["
    for i, elem := range s {
        if i &gt; 0 {
            str += " "
        }
        str += fmt.Sprint(elem)
    }
    return str + "]"
}
</pre>

<h3 id="conversions">Conversions</h3>

<p>
The <code>String</code> method of <code>Sequence</code> is recreating the
work that <code>Sprint</code> already does for slices.  We can share the
effort if we convert the <code>Sequence</code> to a plain
<code>[]int</code> before calling <code>Sprint</code>.
</p>
<pre>
func (s Sequence) String() string {
    sort.Sort(s)
    return fmt.Sprint([]int(s))
}
</pre>
<p>
The conversion causes <code>s</code> to be treated as an ordinary slice
and therefore receive the default formatting.
Without the conversion, <code>Sprint</code> would find the
<code>String</code> method of <code>Sequence</code> and recur indefinitely.
Because the two types (<code>Sequence</code> and <code>[]int</code>)
are the same if we ignore the type name, it's legal to convert between them.
The conversion doesn't create a new value, it just temporarily acts
as though the existing value has a new type.
(There are other legal conversions, such as from integer to floating point, that
do create a new value.)
</p>
<p>
It's an idiom in Go programs to convert the
type of an expression to access a different
set of methods. As an example, we could use the existing
type <code>sort.IntArray</code> to reduce the entire example
to this:
</p>
<pre>
type Sequence []int

// Method for printing - sorts the elements before printing
func (s Sequence) String() string {
    sort.IntArray(s).Sort()
    return fmt.Sprint([]int(s))
}
</pre>
<p>
Now, instead of having <code>Sequence</code> implement multiple
interfaces (sorting and printing), we're using the ability of a data item to be
converted to multiple types (<code>Sequence</code>, <code>sort.IntArray</code>
and <code>[]int</code>), each of which does some part of the job.
That's more unusual in practice but can be effective.
</p>

<h3 id="generality">Generality</h3>
<p>
If a type exists only to implement an interface
and has no exported methods beyond that interface,
there is no need to export the type itself.
Exporting just the interface makes it clear that
it's the behavior that matters, not the implementation,
and that other implementations with different properties
can mirror the behavior of the original type.
It also avoids the need to repeat the documentation
on every instance of a common method.
</p>
<p>
In such cases, the constructor should return an interface value
rather than the implementing type.
As an example, in the hash libraries
both <code>crc32.NewIEEE()</code> and <code>adler32.New()</code>
return the interface type <code>hash.Hash32</code>.
Substituting the CRC-32 algorithm for Adler-32 in a Go program
requires only changing the constructor call;
the rest of the code is unaffected by the change of algorithm.
</p>
<p>
A similar approach allows the streaming cipher algorithms
in the <code>crypto/block</code> package to be
separated from the block ciphers they chain together.
By analogy with the <code>bufio</code> package,
they wrap a <code>Cipher</code> interface
and return <code>hash.Hash</code>,
<code>io.Reader</code>, or <code>io.Writer</code>
interface values, not specific implementations.
</p>
<p>
The interface to <code>crypto/block</code> includes:
</p>
<pre>
type Cipher interface {
    BlockSize() int
    Encrypt(src, dst []byte)
    Decrypt(src, dst []byte)
}

// NewECBDecrypter returns a reader that reads data
// from r and decrypts it using c in electronic codebook (ECB) mode.
func NewECBDecrypter(c Cipher, r io.Reader) io.Reader

// NewCBCDecrypter returns a reader that reads data
// from r and decrypts it using c in cipher block chaining (CBC) mode
// with the initialization vector iv.
func NewCBCDecrypter(c Cipher, iv []byte, r io.Reader) io.Reader
</pre>
<p>
<code>NewECBDecrypter</code> and <code>NewCBCReader</code> apply not
just to one specific encryption algorithm and data source but to any
implementation of the <code>Cipher</code> interface and any
<code>io.Reader</code>.  Because they return <code>io.Reader</code>
interface values, replacing ECB
encryption with CBC encryption is a localized change.  The constructor
calls must be edited, but because the surrounding code must treat the result only
as an <code>io.Reader</code>, it won't notice the difference.
</p>

<h3 id="interface_methods">Interfaces and methods</h3>
<p>
Since almost anything can have methods attached, almost anything can
satisfy an interface.  One illustrative example is in the <code>http</code>
package, which defines the <code>Handler</code> interface.  Any object
that implements <code>Handler</code> can serve HTTP requests.
</p>
<pre>
type Handler interface {
    ServeHTTP(ResponseWriter, *Request)
}
</pre>
<p>
<code>ResponseWriter</code> is itself an interface that provides access
to the methods needed to return the response to the client.
Those methods include the standard <code>Write</code> method, so an
<code>http.ResponseWriter</code> can be used wherever an <code>io.Writer</code>
can be used.
<code>Request</code> is a struct containing a parsed representation
of the request from the client.
<p>
For brevity, let's ignore POSTs and assume HTTP requests are always
GETs; that simplification does not affect the way the handlers are
set up.  Here's a trivial but complete implementation of a handler to
count the number of times the
page is visited.
</p>
<pre>
// Simple counter server.
type Counter struct {
    n int
}

func (ctr *Counter) ServeHTTP(w http.ResponseWriter, req *http.Request) {
    ctr.n++
    fmt.Fprintf(w, "counter = %d\n", ctr.n)
}
</pre>
<p>
(Keeping with our theme, note how <code>Fprintf</code> can print to an
<code>http.ResponseWriter</code>.)
For reference, here's how to attach such a server to a node on the URL tree.
<pre>
import "http"
...
ctr := new(Counter)
http.Handle("/counter", ctr)
</pre>
<p>
But why make <code>Counter</code> a struct?  An integer is all that's needed.
(The receiver needs to be a pointer so the increment is visible to the caller.)
</p>
<pre>
// Simpler counter server.
type Counter int

func (ctr *Counter) ServeHTTP(w http.ResponseWriter, req *http.Request) {
    *ctr++
    fmt.Fprintf(w, "counter = %d\n", *ctr)
}
</pre>
<p>
What if your program has some internal state that needs to be notified that a page
has been visited?  Tie a channel to the web page.
</p>
<pre>
// A channel that sends a notification on each visit.
// (Probably want the channel to be buffered.)
type Chan chan *http.Request

func (ch Chan) ServeHTTP(w http.ResponseWriter, req *http.Request) {
    ch &lt;- req
    fmt.Fprint(w, "notification sent")
}
</pre>
<p>
Finally, let's say we wanted to present on <code>/args</code> the arguments
used when invoking the server binary.
It's easy to write a function to print the arguments.
</p>
<pre>
func ArgServer() {
    for i, s := range os.Args {
        fmt.Println(s)
    }
}
</pre>
<p>
How do we turn that into an HTTP server?  We could make <code>ArgServer</code>
a method of some type whose value we ignore, but there's a cleaner way.
Since we can define a method for any type except pointers and interfaces,
we can write a method for a function.
The <code>http</code> package contains this code:
</p>
<pre>
// The HandlerFunc type is an adapter to allow the use of
// ordinary functions as HTTP handlers.  If f is a function
// with the appropriate signature, HandlerFunc(f) is a
// Handler object that calls f.
type HandlerFunc func(ResponseWriter, *Request)

// ServeHTTP calls f(c, req).
func (f HandlerFunc) ServeHTTP(w ResponseWriter, req *Request) {
    f(w, req)
}
</pre>
<p>
<code>HandlerFunc</code> is a type with a method, <code>ServeHTTP</code>,
so values of that type can serve HTTP requests.  Look at the implementation
of the method: the receiver is a function, <code>f</code>, and the method
calls <code>f</code>.  That may seem odd but it's not that different from, say,
the receiver being a channel and the method sending on the channel.
</p>
<p>
To make <code>ArgServer</code> into an HTTP server, we first modify it
to have the right signature.
</p>
<pre>
// Argument server.
func ArgServer(w http.ResponseWriter, req *http.Request) {
    for i, s := range os.Args {
        fmt.Fprintln(w, s)
    }
}
</pre>
<p>
<code>ArgServer</code> now has same signature as <code>HandlerFunc</code>,
so it can be converted to that type to access its methods,
just as we converted <code>Sequence</code> to <code>IntArray</code>
to access <code>IntArray.Sort</code>.
The code to set it up is concise:
</p>
<pre>
http.Handle("/args", http.HandlerFunc(ArgServer))
</pre>
<p>
When someone visits the page <code>/args</code>,
the handler installed at that page has value <code>ArgServer</code>
and type <code>HandlerFunc</code>.
The HTTP server will invoke the method <code>ServeHTTP</code>
of that type, with <code>ArgServer</code> as the receiver, which will in turn call
<code>ArgServer</code> (via the invocation <code>f(c, req)</code>
inside <code>HandlerFunc.ServeHTTP</code>).
The arguments will then be displayed.
</p>
<p>
In this section we have made an HTTP server from a struct, an integer,
a channel, and a function, all because interfaces are just sets of
methods, which can be defined for (almost) any type.
</p>

<h2 id="embedding">Embedding</h2>

<p>
Go does not provide the typical, type-driven notion of subclassing,
but it does have the ability to &ldquo;borrow&rdquo; pieces of an
implementation by <em>embedding</em> types within a struct or
interface.
</p>
<p>
Interface embedding is very simple.
We've mentioned the <code>io.Reader</code> and <code>io.Writer</code> interfaces before;
here are their definitions.
</p>
<pre>
type Reader interface {
    Read(p []byte) (n int, err os.Error)
}

type Writer interface {
    Write(p []byte) (n int, err os.Error)
}
</pre>
<p>
The <code>io</code> package also exports several other interfaces
that specify objects that can implement several such methods.
For instance, there is <code>io.ReadWriter</code>, an interface
containing both <code>Read</code> and <code>Write</code>.
We could specify <code>io.ReadWriter</code> by listing the
two methods explicitly, but it's easier and more evocative
to embed the two interfaces to form the new one, like this:
</p>
<pre>
// ReadWriter is the interface that combines the Reader and Writer interfaces.
type ReadWriter interface {
    Reader
    Writer
}
</pre>
<p>
This says just what it looks like: A <code>ReadWriter</code> can do
what a <code>Reader</code> does <em>and</em> what a <code>Writer</code>
does; it is a union of the embedded interfaces (which must be disjoint
sets of methods).
Only interfaces can be embedded within interfaces.
<p>
The same basic idea applies to structs, but with more far-reaching
implications.  The <code>bufio</code> package has two struct types,
<code>bufio.Reader</code> and <code>bufio.Writer</code>, each of
which of course implements the analogous interfaces from package
<code>io</code>.
And <code>bufio</code> also implements a buffered reader/writer,
which it does by combining a reader and a writer into one struct
using embedding: it lists the types within the struct
but does not give them field names.
</p>
<pre>
// ReadWriter stores pointers to a Reader and a Writer.
// It implements io.ReadWriter.
type ReadWriter struct {
    *Reader  // *bufio.Reader
    *Writer  // *bufio.Writer
}
</pre>
<p>
The embedded elements are pointers to structs and of course
must be initialized to point to valid structs before they
can be used.
The <code>ReadWriter</code> struct could be written as
</p>
<pre>
type ReadWriter struct {
    reader *Reader
    writer *Writer
}
</pre>
<p>
but then to promote the methods of the fields and to
satisfy the <code>io</code> interfaces, we would also need
to provide forwarding methods, like this:
</p>
<pre>
func (rw *ReadWriter) Read(p []byte) (n int, err os.Error) {
    return rw.reader.Read(p)
}
</pre>
<p>
By embedding the structs directly, we avoid this bookkeeping.
The methods of embedded types come along for free, which means that <code>bufio.ReadWriter</code>
not only has the methods of <code>bufio.Reader</code> and <code>bufio.Writer</code>,
it also satisfies all three interfaces:
<code>io.Reader</code>,
<code>io.Writer</code>, and
<code>io.ReadWriter</code>.
</p>
<p>
There's an important way in which embedding differs from subclassing.  When we embed a type,
the methods of that type become methods of the outer type,
but when they are invoked the receiver of the method is the inner type, not the outer one.
In our example, when the <code>Read</code> method of a <code>bufio.ReadWriter</code> is
invoked, it has exactly the same effect as the forwarding method written out above;
the receiver is the <code>reader</code> field of the <code>ReadWriter</code>, not the
<code>ReadWriter</code> itself.
</p>
<p>
Embedding can also be a simple convenience.
This example shows an embedded field alongside a regular, named field.
</p>
<pre>
type Job struct {
    Command string
    *log.Logger
}
</pre>
<p>
The <code>Job</code> type now has the <code>Log</code>, <code>Logf</code>
and other
methods of <code>*log.Logger</code>.  We could have given the <code>Logger</code>
a field name, of course, but it's not necessary to do so.  And now, once
initialized, we can
log to the <code>Job</code>:
</p>
<pre>
job.Log("starting now...")
</pre>
<p>
The <code>Logger</code> is a regular field of the struct and we can initialize
it in the usual way with a constructor,
</p>
<pre>
func NewJob(command string, logger *log.Logger) *Job {
    return &amp;Job{command, logger}
}
</pre>
<p>
or with a composite literal,
</p>
<pre>
job := &amp;Job{command, log.New(os.Stderr, "Job: ", log.Ldate)}
</pre>
<p>
If we need to refer to an embedded field directly, the type name of the field,
ignoring the package qualifier, serves as a field name.  If we needed to access the
<code>*log.Logger</code> of a <code>Job</code> variable <code>job</code>,
we would write <code>job.Logger</code>.
This would be useful if we wanted to refine the methods of <code>Logger</code>.
</p>
<pre>
func (job *Job) Logf(format string, args ...) {
    job.Logger.Logf("%q: %s", job.Command, fmt.Sprintf(format, args))
}
</pre>
<p>
Embedding types introduces the problem of name conflicts but the rules to resolve
them are simple.
First, a field or method <code>X</code> hides any other item <code>X</code> in a more deeply
nested part of the type.
If <code>log.Logger</code> contained a field or method called <code>Command</code>, the <code>Command</code> field
of <code>Job</code> would dominate it.
</p>
<p>
Second, if the same name appears at the same nesting level, it is usually an error;
it would be erroneous to embed <code>log.Logger</code> if the <code>Job</code> struct
contained another field or method called <code>Logger</code>.
However, if the duplicate name is never mentioned in the program outside the type definition, it is OK.
This qualification provides some protection against changes made to types embedded from outside; there
is no problem if a field is added that conflicts with another field in another subtype if neither field
is ever used.
</p>


<h2 id="concurrency">Concurrency</h2>

<h3 id="sharing">Share by communicating</h3>

<p>
Concurrent programming is a large topic and there is space only for some
Go-specific highlights here.
</p>
<p>
Concurrent programming in many environments is made difficult by the
subtleties required to implement correct access to shared variables.  Go encourages
a different approach in which shared values are passed around on channels
and, in fact, never actively shared by separate threads of execution.
Only one goroutine has access to the value at any given time.
Data races cannot occur, by design.
To encourage this way of thinking we have reduced it to a slogan:
</p>
<blockquote>
Do not communicate by sharing memory;
instead, share memory by communicating.
</blockquote>
<p>
This approach can be taken too far.  Reference counts may be best done
by putting a mutex around an integer variable, for instance.  But as a
high-level approach, using channels to control access makes it easier
to write clear, correct programs.
</p>
<p>
One way to think about this model is to consider a typical single-threaded
program running on one CPU. It has no need for synchronization primitives.
Now run another such instance; it too needs no synchronization.  Now let those
two communicate; if the communication is the synchronizer, there's still no need
for other synchronization.  Unix pipelines, for example, fit this model
perfectly.  Although Go's approach to concurrency originates in Hoare's
Communicating Sequential Processes (CSP),
it can also be seen as a type-safe generalization of Unix pipes.
</p>

<h3 id="goroutines">Goroutines</h3>

<p>
They're called <em>goroutines</em> because the existing
terms&mdash;threads, coroutines, processes, and so on&mdash;convey
inaccurate connotations.  A goroutine has a simple model: it is a
function executing in parallel with other goroutines in the same
address space.  It is lightweight, costing little more than the
allocation of stack space.
And the stacks start small, so they are cheap, and grow
by allocating (and freeing) heap storage as required.
</p>
<p>
Goroutines are multiplexed onto multiple OS threads so if one should
block, such as while waiting for I/O, others continue to run.  Their
design hides many of the complexities of thread creation and
management.
</p>
<p>
Prefix a function or method call with the <code>go</code>
keyword to run the call in a new goroutine.
When the call completes, the goroutine
exits, silently.  (The effect is similar to the Unix shell's
<code>&amp;</code> notation for running a command in the
background.)
</p>
<pre>
go list.Sort()  // run list.Sort in parallel; don't wait for it. 
</pre>
<p>
A function literal can be handy in a goroutine invocation.
<pre>
func Announce(message string, delay int64) {
    go func() {
        time.Sleep(delay)
        fmt.Println(message)
    }()  // Note the parentheses - must call the function.
}
</pre>
<p>
In Go, function literals are closures: the implementation makes
sure the variables referred to by the function survive as long as they are active.
<p>
These examples aren't too practical because the functions have no way of signaling
completion.  For that, we need channels.
</p>

<h3 id="channels">Channels</h3>

<p>
Like maps, channels are a reference type and are allocated with <code>make</code>.
If an optional integer parameter is provided, it sets the buffer size for the channel.
The default is zero, for an unbuffered or synchronous channel.
</p>
<pre>
ci := make(chan int)            // unbuffered channel of integers
cj := make(chan int, 0)         // unbuffered channel of integers
cs := make(chan *os.File, 100)  // buffered channel of pointers to Files
</pre>
<p>
Channels combine communication&mdash;the exchange of a value&mdash;with
synchronization&mdash;guaranteeing that two calculations (goroutines) are in
a known state.
</p>
<p>
There are lots of nice idioms using channels.  Here's one to get us started.
In the previous section we launched a sort in the background. A channel
can allow the launching goroutine to wait for the sort to complete.
</p>
<pre>
c := make(chan int)  // Allocate a channel.
// Start the sort in a goroutine; when it completes, signal on the channel.
go func() {
    list.Sort()
    c &lt;- 1  // Send a signal; value does not matter. 
}()
doSomethingForAWhile()
&lt;-c   // Wait for sort to finish; discard sent value.
</pre>
<p>
Receivers always block until there is data to receive.
If the channel is unbuffered, the sender blocks until the receiver has
received the value.
If the channel has a buffer, the sender blocks only until the
value has been copied to the buffer; if the buffer is full, this
means waiting until some receiver has retrieved a value.
</p>
<p>
A buffered channel can be used like a semaphore, for instance to
limit throughput.  In this example, incoming requests are passed
to <code>handle</code>, which sends a value into the channel, processes
the request, and then receives a value from the channel.
The capacity of the channel buffer limits the number of
simultaneous calls to <code>process</code>.
</p>
<pre>
var sem = make(chan int, MaxOutstanding)

func handle(r *Request) {
    sem &lt;- 1    // Wait for active queue to drain.
    process(r)  // May take a long time.
    &lt;-sem       // Done; enable next request to run.
}

func Serve(queue chan *Request) {
    for {
        req := &lt;-queue
        go handle(req)  // Don't wait for handle to finish.
    }
}
</pre>
<p>
Here's the same idea implemented by starting a fixed
number of <code>handle</code> goroutines all reading from the request
channel.
The number of goroutines limits the number of simultaneous
calls to <code>process</code>.
This <code>Serve</code> function also accepts a channel on which
it will be told to exit; after launching the goroutines it blocks
receiving from that channel.
</p>
<pre>
func handle(queue chan *Request) {
    for r := range queue {
        process(r)
    }
}

func Serve(clientRequests chan *clientRequests, quit chan bool) {
    // Start handlers
    for i := 0; i &lt; MaxOutstanding; i++ {
        go handle(clientRequests)
    }
    &lt;-quit  // Wait to be told to exit.
}
</pre>

<h3 id="chan_of_chan">Channels of channels</h3>
<p>
One of the most important properties of Go is that
a channel is a first-class value that can be allocated and passed
around like any other.  A common use of this property is
to implement safe, parallel demultiplexing.
<p>
In the example in the previous section, <code>handle</code> was
an idealized handler for a request but we didn't define the
type it was handling.  If that type includes a channel on which
to reply, each client can provide its own path for the answer.
Here's a schematic definition of type <code>Request</code>.
</p>
<pre>
type Request struct {
    args        []int
    f           func([]int) int
    resultChan  chan int
}
</pre>
<p>
The client provides a function and its arguments, as well as
a channel inside the request object on which to receive the answer.
</p>
<pre>
func sum(a []int) (s int) {
    for _, v := range a {
        s += v
    }
    return
}

request := &amp;Request{[]int{3, 4, 5}, sum, make(chan int)}
// Send request
clientRequests &lt;- request
// Wait for response.
fmt.Printf("answer: %d\n", &lt;-request.resultChan)
</pre>
<p>
On the server side, the handler function is the only thing that changes.
</p>
<pre>
func handle(queue chan *Request) {
    for req := range queue {
        req.resultChan &lt;- req.f(req.args)
    }
}
</pre>
<p>
There's clearly a lot more to do to make it realistic, but this
code is a framework for a rate-limited, parallel, non-blocking RPC
system, and there's not a mutex in sight.
</p>

<h3 id="parallel">Parallelization</h3>
<p>
Another application of these ideas is to parallelize a calculation
across multiple CPU cores.  If the calculation can be broken into
separate pieces, it can be parallelized, with a channel to signal
when each piece completes.
</p>
<p>
Let's say we have an expensive operation to perform on a vector of items,
and that the value of the operation on each item is independent,
as in this idealized example.
</p>
<pre>
type Vector []float64

// Apply the operation to v[i], v[i+1] ... up to v[n-1].
func (v Vector) DoSome(i, n int, u Vector, c chan int) {
    for ; i &lt; n; i++ {
        v[i] += u.Op(v[i])
    }
    c &lt;- 1    // signal that this piece is done
}
</pre>
<p>
We launch the pieces independently in a loop, one per CPU.
They can complete in any order but it doesn't matter; we just
count the completion signals by draining the channel after
launching all the goroutines.
</p>
<pre>
const NCPU = 4  // number of CPU cores

func (v Vector) DoAll(u Vector) {
    c := make(chan int, NCPU)  // Buffering optional but sensible.
    for i := 0; i &lt; NCPU; i++ {
        go v.DoSome(i*len(v)/NCPU, (i+1)*len(v)/NCPU, u, c)
    }
    // Drain the channel.
    for i := 0; i &lt; NCPU; i++ {
        &lt;-c    // wait for one task to complete
    }
    // All done.
}

</pre>

<p>
The current implementation of <code>gc</code> (<code>6g</code>, etc.)
will not parallelize this code by default.
It dedicates only a single core to user-level processing.  An
arbitrary number of goroutines can be blocked in system calls, but
by default only one can be executing user-level code at any time.
It should be smarter and one day it will be smarter, but until it
is if you want CPU parallelism you must tell the run-time
how many goroutines you want executing code simultaneously.  There
are two related ways to do this.  Either run your job with environment
variable <code>GOMAXPROCS</code> set to the number of cores to use
(default 1); or import the <code>runtime</code> package and call
<code>runtime.GOMAXPROCS(NCPU)</code>.
Again, this requirement is expected to be retired as the scheduling and run-time improve.
</p>

<h3 id="leaky_buffer">A leaky buffer</h3>

<p>
The tools of concurrent programming can even make non-concurrent
ideas easier to express.  Here's an example abstracted from an RPC
package.  The client goroutine loops receiving data from some source,
perhaps a network.  To avoid allocating and freeing buffers, it keeps
a free list, and uses a buffered channel to represent it.  If the
channel is empty, a new buffer gets allocated.
Once the message buffer is ready, it's sent to the server on
<code>serverChan</code>.
</p>
<pre>
var freeList = make(chan *Buffer, 100)
var serverChan = make(chan *Buffer)

func client() {
    for {
        b, ok := &lt;-freeList  // grab a buffer if available
        if !ok {              // if not, allocate a new one
            b = new(Buffer)
        }
        load(b)              // read next message from the net
        serverChan &lt;- b      // send to server
    }
}
</pre>
<p>
The server loop receives messages from the client, processes them,
and returns the buffer to the free list.
</p>
<pre>
func server() {
    for {
        b := &lt;-serverChan    // wait for work
        process(b)
        _ = freeList &lt;- b    // reuse buffer if room
    }
}
</pre>
<p>
The client's non-blocking receive from <code>freeList</code> obtains a
buffer if one is available; otherwise the client allocates
a fresh one.
The server's non-blocking send on freeList puts <code>b</code> back
on the free list unless the list is full, in which case the
buffer is dropped on the floor to be reclaimed by
the garbage collector.
(The assignment of the send operation to the blank identifier
makes it non-blocking but ignores whether
the operation succeeded.)
This implementation builds a leaky bucket free list
in just a few lines, relying on the buffered channel and
the garbage collector for bookkeeping.
</p>

<h2 id="errors">Errors</h2>

<p>
Library routines must often return some sort of error indication to
the caller.  As mentioned earlier, Go's multivalue return makes it
easy to return a detailed error description alongside the normal
return value.  By convention, errors have type <code>os.Error</code>,
a simple interface.
</p>
<pre>
type Error interface {
    String() string
}
</pre>
<p>
A library writer is free to implement this interface with a
richer model under the covers, making it possible not only
to see the error but also to provide some context.
For example, <code>os.Open</code> returns an <code>os.PathError</code>.
</p>
<pre>
// PathError records an error and the operation and
// file path that caused it.
type PathError struct {
    Op string    // "open", "unlink", etc.
    Path string  // The associated file.
    Error Error  // Returned by the system call.
}

func (e *PathError) String() string {
    return e.Op + " " + e.Path + ": " + e.Error.String()
}
</pre>
<p>
<code>PathError</code>'s <code>String</code> generates
a string like this:
</p>
<pre>
open /etc/passwx: no such file or directory
</pre>
<p>
Such an error, which includes the problematic file name, the
operation, and the operating system error it triggered, is useful even
if printed far from the call that caused it;
it is much more informative than the plain
"no such file or directory".
</p>

<p>
Callers that care about the precise error details can
use a type switch or a type assertion to look for specific
errors and extract details.  For <code>PathErrors</code>
this might include examining the internal <code>Error</code>
field for recoverable failures.
</p>

<pre>
for try := 0; try &lt; 2; try++ {
    file, err = os.Open(filename, os.O_RDONLY, 0)
    if err == nil {
        return
    }
    if e, ok := err.(*os.PathError); ok &amp;&amp; e.Error == os.ENOSPC {
        deleteTempFiles()  // Recover some space.
        continue
    }
    return
}
</pre>

<h3 id="panic">Panic</h3>

<p>
The usual way to report an error to a caller is to return an
<code>os.Error</code> as an extra return value.  The canonical
<code>Read</code> method is a well-known instance; it returns a byte
count and an <code>os.Error</code>.  But what if the error is
unrecoverable?  Sometimes the program simply cannot continue.
</p>

<p>
For this purpose, there is a built-in function <code>panic</code>
that in effect creates a run-time error that will stop the program
(but see the next section).  The function takes a single argument
of arbitrary type&mdash;often a string&mdash;to be printed as the
program dies.  It's also a way to indicate that something impossible has
happened, such as exiting an infinite loop.  In fact, the compiler
recognizes a <code>panic</code> at the end of a function and
suppresses the usual check for a <code>return</code> statement.
</p>


<pre>
// A toy implementation of cube root using Newton's method.
func CubeRoot(x float64) float64 {
    z := x/3   // Arbitrary intitial value
    for i := 0; i < 1e6; i++ {
        prevz := z
        z -= (z*z*z-x) / (3*z*z)
        if veryClose(z, prevz) {
            return z
        }
    }
    // A million iterations has not converged; something is wrong.
    panic(fmt.Sprintf("CubeRoot(%g) did not converge", x))
}
</pre>

<p>
This is only an example but real library functions should
avoid <code>panic</code>.  If the problem can be masked or worked
around, it's always better to let things continue to run rather
than taking down the whole program.  One possible counterexample
is during initialization: if the library truly cannot set itself up,
it might be reasonable to panic, so to speak.
</p>

<pre>
var user = os.Getenv("USER")

func init() {
    if user == "" {
        panic("no value for $USER")
    }
}
</pre>

<h3 id="recover">Recover</h3>

<p>
When <code>panic</code> is called, including implicitly for run-time
errors such indexing an array out of bounds or failing a type
assertion, it immediately stops execution of the current function
and begins unwinding the stack of the goroutine, running any deferred
functions along the way.  If that unwinding reaches the top of the
goroutine's stack, the program dies.  However, it is possible to
use the built-in function <code>recover</code> to regain control
of the goroutine and resume normal execution.
</p>

<p>
A call to <code>recover</code> stops the unwinding and returns the
argument passed to <code>panic</code>.  Because the only code that
runs while unwinding is inside deferred functions, <code>recover</code>
is only useful inside deferred functions.
</p>

<p>
One application of <code>recover</code> is to shut down a failing goroutine
inside a server without killing the other executing goroutines.
</p>

<pre>
func server(workChan <-chan *Work) {
    for work := range workChan {
        go safelyDo(work)
    }
}

func safelyDo(work *Work) {
    defer func() {
        if err := recover(); err != nil {
            log.Println("work failed:", err)
        }
    }()
    do(work)
}
</pre>

<p>
In this example, if <code>do(work)</code> panics, the result will be
logged and the goroutine will exit cleanly without disturbing the
others.  There's no need to do anything else in the deferred closure;
calling <code>recover</code> handles the condition completely.
</p>

<p>
Note that with this recovery pattern in place, the <code>do</code>
function (and anything it calls) can get out of any bad situation
cleanly by calling <code>panic</code>.  We can use that idea to
simplify error handling in complex software.  Let's look at an
idealized excerpt from the <code>regexp</code> package, which reports
parsing errors by calling <code>panic</code> with a local
<code>Error</code> type.  Here's the definition of <code>Error</code>,
an <code>error</code> method, and the <code>Compile</code> function.
</p>

<pre>
// Error is the type of a parse error; it satisfies os.Error.
type Error string
func (e Error) String() string {
    return string(e)
}

// error is a method of *Regexp that reports parsing errors by
// panicking with an Error.
func (regexp *Regexp) error(err string) {
    panic(Error(err))
}

// Compile returns a parsed representation of the regular expression.
func Compile(str string) (regexp *Regexp, err os.Error) {
    regexp = new(Regexp)
    // doParse will panic if there is a parse error.
    defer func() {
        if e := recover(); e != nil {
            regexp = nil    // Clear return value.
            err = e.(Error) // Will re-panic if not a parse error.
        }
    }()
    return regexp.doParse(str), nil
}
</pre>

<p>
If <code>doParse</code> panics, the recovery block will set the
return value to <code>nil</code>&mdash;deferred functions can modify
named return values.  It then will then check, in the assignment
to <code>err</code>, that the problem was a parse error by asserting
that it has type <code>Error</code>.
If it does not, the type assertion will fail, causing a run-time error
that continues the stack unwinding as though nothing had interrupted
it.  This check means that if something unexpected happens, such
as an array index out of bounds, the code will fail even though we
are using <code>panic</code> and <code>recover</code> to handle
user-triggered errors.
</p>

<p>
With error handling in place, the <code>error</code> method
makes it easy to report parse errors without worrying about unwinding
the parse stack by hand.
</p>

<p>
Useful though this pattern is, it should be used only within a package.
<code>Parse</code> turns its internal <code>panic</code> calls into
<code>os.Error</code> values; it does not expose <code>panics</code>
to its client.  That is a good rule to follow.
</p>

<p>
By the way, this re-panic idiom changes the panic value if an actual
error occurs.  However, both the original and new failures will be
presented in the crash report, so the root cause of the problem will
still be visible.  Thus this simple re-panic approach is usually
sufficient&mdash;it's a crash after all&mdash;but if you want to
display only the original value, you can write a little more code to
filter unexpected problems and re-panic with the original error.
That's left as an exercise for the reader.
</p>


<h2 id="web_server">A web server</h2>

<p>
Let's finish with a complete Go program, a web server.
This one is actually a kind of web re-server.
Google provides a service at
<a href="http://chart.apis.google.com">http://chart.apis.google.com</a>
that does automatic formatting of data into charts and graphs.
It's hard to use interactively, though,
because you need to put the data into the URL as a query.
The program here provides a nicer interface to one form of data: given a short piece of text,
it calls on the chart server to produce a QR code, a matrix of boxes that encode the
text.
That image can be grabbed with your cell phone's camera and interpreted as,
for instance, a URL, saving you typing the URL into the phone's tiny keyboard.
</p>
<p>
Here's the complete program.
An explanation follows.
</p>

<pre>
package main

import (
    "flag"
    "http"
    "io"
    "log"
    "template"
)

var addr = flag.String("addr", ":1718", "http service address") // Q=17, R=18
var fmap = template.FormatterMap{
    "html": template.HTMLFormatter,
    "url+html": UrlHtmlFormatter,
}
var templ = template.MustParse(templateStr, fmap)

func main() {
    flag.Parse()
    http.Handle("/", http.HandlerFunc(QR))
    err := http.ListenAndServe(*addr, nil)
    if err != nil {
        log.Exit("ListenAndServe:", err)
    }
}

func QR(w http.ResponseWriter, req *http.Request) {
    templ.Execute(req.FormValue("s"), w)
}

func UrlHtmlFormatter(w io.Writer, fmt string, v ...interface{}) {
    template.HTMLEscape(w, []byte(http.URLEscape(v[0].(string))))
}


const templateStr = `
&lt;html&gt;
&lt;head&gt;
&lt;title&gt;QR Link Generator&lt;/title&gt;
&lt;/head&gt;
&lt;body&gt;
{.section @}
&lt;img src="http://chart.apis.google.com/chart?chs=300x300&amp;cht=qr&amp;choe=UTF-8&amp;chl={@|url+html}"
/&gt;
&lt;br&gt;
{@|html}
&lt;br&gt;
&lt;br&gt;
{.end}
&lt;form action="/" name=f method="GET"&gt;&lt;input maxLength=1024 size=70
name=s value="" title="Text to QR Encode"&gt;&lt;input type=submit
value="Show QR" name=qr&gt;
&lt;/form&gt;
&lt;/body&gt;
&lt;/html&gt;
`
</pre>

<p>
The pieces up to <code>main</code> should be easy to follow.
The one flag sets a default HTTP port for our server.  The template
variable <code>templ</code> is where the fun happens. It builds an HTML template
that will be executed by the server to display the page; more about
that in a moment.
</p>
<p>
The <code>main</code> function parses the flags and, using the mechanism
we talked about above, binds the function <code>QR</code> to the root path
for the server.  Then <code>http.ListenAndServe</code> is called to start the
server; it blocks while the server runs.
</p>
<p>
<code>QR</code> just receives the request, which contains form data, and
executes the template on the data in the form value named <code>s</code>.
</p>
<p>
The template package, inspired by <a
href="http://code.google.com/p/json-template">json-template</a>, is
powerful;
this program just touches on its capabilities.
In essence, it rewrites a piece of text on the fly by substituting elements derived
from data items passed to <code>templ.Execute</code>, in this case the
form value.  
Within the template text (<code>templateStr</code>),
brace-delimited pieces denote template actions.
The piece from the <code>{.section @}</code>
to <code>{.end}</code> executes with the value of the data item <code>@</code>,
which is a shorthand for &ldquo;the current item&rdquo;, which is the form value.
(When the string is empty, this piece of the template is suppressed.)
</p>
<p>
The snippet <code>{@|url+html}</code> says to run the data through the formatter
installed in the formatter map (<code>fmap</code>)
under the name <code>"url+html"</code>.
That is the function <code>UrlHtmlFormatter</code>, which sanitizes the string
for safe display on the web page.
</p>
<p>
The rest of the template string is just the HTML to show when the page loads.
If this is too quick an explanation, see the <a href="/pkg/template/">documentation</a>
for the template package for a more thorough discussion.
</p>
<p>
And there you have it: a useful webserver in a few lines of code plus some
data-driven HTML text.
Go is powerful enough to make a lot happen in a few lines.
</p>

<!--
TODO
<pre>
verifying implementation
type Color uint32
    
// Check that Color implements image.Color and image.Image
var _ image.Color = Black
var _ image.Image = Black
</pre>
-->