blob: afccbfe8a749bc85ec864b382529d8d0a95a65db [file] [log] [blame]
// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package net
import (
"io"
"os"
"syscall"
"time"
)
// TCPConn is an implementation of the Conn interface for TCP network
// connections.
type TCPConn struct {
conn
}
func newTCPConn(fd *netFD) *TCPConn {
return &TCPConn{conn{fd}}
}
// ReadFrom implements the io.ReaderFrom ReadFrom method.
func (c *TCPConn) ReadFrom(r io.Reader) (int64, error) {
n, err := genericReadFrom(c, r)
if err != nil && err != io.EOF {
err = &OpError{Op: "read", Net: c.fd.dir, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
}
return n, err
}
// CloseRead shuts down the reading side of the TCP connection.
// Most callers should just use Close.
func (c *TCPConn) CloseRead() error {
if !c.ok() {
return syscall.EINVAL
}
err := c.fd.closeRead()
if err != nil {
err = &OpError{Op: "close", Net: c.fd.dir, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
}
return err
}
// CloseWrite shuts down the writing side of the TCP connection.
// Most callers should just use Close.
func (c *TCPConn) CloseWrite() error {
if !c.ok() {
return syscall.EINVAL
}
err := c.fd.closeWrite()
if err != nil {
err = &OpError{Op: "close", Net: c.fd.dir, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
}
return err
}
// SetLinger sets the behavior of Close on a connection which still
// has data waiting to be sent or to be acknowledged.
//
// If sec < 0 (the default), the operating system finishes sending the
// data in the background.
//
// If sec == 0, the operating system discards any unsent or
// unacknowledged data.
//
// If sec > 0, the data is sent in the background as with sec < 0. On
// some operating systems after sec seconds have elapsed any remaining
// unsent data may be discarded.
func (c *TCPConn) SetLinger(sec int) error {
return &OpError{Op: "set", Net: c.fd.dir, Source: c.fd.laddr, Addr: c.fd.raddr, Err: syscall.EPLAN9}
}
// SetKeepAlive sets whether the operating system should send
// keepalive messages on the connection.
func (c *TCPConn) SetKeepAlive(keepalive bool) error {
if !c.ok() {
return syscall.EPLAN9
}
if err := setKeepAlive(c.fd, keepalive); err != nil {
return &OpError{Op: "set", Net: c.fd.dir, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
}
return nil
}
// SetKeepAlivePeriod sets period between keep alives.
func (c *TCPConn) SetKeepAlivePeriod(d time.Duration) error {
if !c.ok() {
return syscall.EPLAN9
}
if err := setKeepAlivePeriod(c.fd, d); err != nil {
return &OpError{Op: "set", Net: c.fd.dir, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
}
return nil
}
// SetNoDelay controls whether the operating system should delay
// packet transmission in hopes of sending fewer packets (Nagle's
// algorithm). The default is true (no delay), meaning that data is
// sent as soon as possible after a Write.
func (c *TCPConn) SetNoDelay(noDelay bool) error {
return &OpError{Op: "set", Net: c.fd.dir, Source: c.fd.laddr, Addr: c.fd.raddr, Err: syscall.EPLAN9}
}
// DialTCP connects to the remote address raddr on the network net,
// which must be "tcp", "tcp4", or "tcp6". If laddr is not nil, it is
// used as the local address for the connection.
func DialTCP(net string, laddr, raddr *TCPAddr) (*TCPConn, error) {
return dialTCP(net, laddr, raddr, noDeadline, noCancel)
}
func dialTCP(net string, laddr, raddr *TCPAddr, deadline time.Time, cancel <-chan struct{}) (*TCPConn, error) {
if !deadline.IsZero() {
panic("net.dialTCP: deadline not implemented on Plan 9")
}
// TODO(bradfitz,0intro): also use the cancel channel.
switch net {
case "tcp", "tcp4", "tcp6":
default:
return nil, &OpError{Op: "dial", Net: net, Source: laddr.opAddr(), Addr: raddr.opAddr(), Err: UnknownNetworkError(net)}
}
if raddr == nil {
return nil, &OpError{Op: "dial", Net: net, Source: laddr.opAddr(), Addr: nil, Err: errMissingAddress}
}
fd, err := dialPlan9(net, laddr, raddr)
if err != nil {
return nil, err
}
return newTCPConn(fd), nil
}
// TCPListener is a TCP network listener. Clients should typically
// use variables of type Listener instead of assuming TCP.
type TCPListener struct {
fd *netFD
}
// AcceptTCP accepts the next incoming call and returns the new
// connection.
func (l *TCPListener) AcceptTCP() (*TCPConn, error) {
if l == nil || l.fd == nil || l.fd.ctl == nil {
return nil, syscall.EINVAL
}
fd, err := l.fd.acceptPlan9()
if err != nil {
return nil, err
}
return newTCPConn(fd), nil
}
// Accept implements the Accept method in the Listener interface; it
// waits for the next call and returns a generic Conn.
func (l *TCPListener) Accept() (Conn, error) {
if l == nil || l.fd == nil || l.fd.ctl == nil {
return nil, syscall.EINVAL
}
c, err := l.AcceptTCP()
if err != nil {
return nil, err
}
return c, nil
}
// Close stops listening on the TCP address.
// Already Accepted connections are not closed.
func (l *TCPListener) Close() error {
if l == nil || l.fd == nil || l.fd.ctl == nil {
return syscall.EINVAL
}
if _, err := l.fd.ctl.WriteString("hangup"); err != nil {
l.fd.ctl.Close()
return &OpError{Op: "close", Net: l.fd.dir, Source: nil, Addr: l.fd.laddr, Err: err}
}
err := l.fd.ctl.Close()
if err != nil {
err = &OpError{Op: "close", Net: l.fd.dir, Source: nil, Addr: l.fd.laddr, Err: err}
}
return err
}
// Addr returns the listener's network address, a *TCPAddr.
// The Addr returned is shared by all invocations of Addr, so
// do not modify it.
func (l *TCPListener) Addr() Addr { return l.fd.laddr }
// SetDeadline sets the deadline associated with the listener.
// A zero time value disables the deadline.
func (l *TCPListener) SetDeadline(t time.Time) error {
if l == nil || l.fd == nil || l.fd.ctl == nil {
return syscall.EINVAL
}
if err := l.fd.setDeadline(t); err != nil {
return &OpError{Op: "set", Net: l.fd.dir, Source: nil, Addr: l.fd.laddr, Err: err}
}
return nil
}
// File returns a copy of the underlying os.File, set to blocking
// mode. It is the caller's responsibility to close f when finished.
// Closing l does not affect f, and closing f does not affect l.
//
// The returned os.File's file descriptor is different from the
// connection's. Attempting to change properties of the original
// using this duplicate may or may not have the desired effect.
func (l *TCPListener) File() (f *os.File, err error) {
f, err = l.dup()
if err != nil {
err = &OpError{Op: "file", Net: l.fd.dir, Source: nil, Addr: l.fd.laddr, Err: err}
}
return
}
// ListenTCP announces on the TCP address laddr and returns a TCP
// listener. Net must be "tcp", "tcp4", or "tcp6". If laddr has a
// port of 0, ListenTCP will choose an available port. The caller can
// use the Addr method of TCPListener to retrieve the chosen address.
func ListenTCP(net string, laddr *TCPAddr) (*TCPListener, error) {
switch net {
case "tcp", "tcp4", "tcp6":
default:
return nil, &OpError{Op: "listen", Net: net, Source: nil, Addr: laddr.opAddr(), Err: UnknownNetworkError(net)}
}
if laddr == nil {
laddr = &TCPAddr{}
}
fd, err := listenPlan9(net, laddr)
if err != nil {
return nil, err
}
return &TCPListener{fd}, nil
}