blob: c9b2956b7845e58e1d5bf0c766bade121ce3a8c6 [file] [log] [blame]
// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package time_test
import (
"errors"
"fmt"
"runtime"
"sort"
"strings"
"sync"
"sync/atomic"
"testing"
. "time"
)
// Go runtime uses different Windows timers for time.Now and sleeping.
// These can tick at different frequencies and can arrive out of sync.
// The effect can be seen, for example, as time.Sleep(100ms) is actually
// shorter then 100ms when measured as difference between time.Now before and
// after time.Sleep call. This was observed on Windows XP SP3 (windows/386).
// windowsInaccuracy is to ignore such errors.
const windowsInaccuracy = 17 * Millisecond
func TestSleep(t *testing.T) {
const delay = 100 * Millisecond
go func() {
Sleep(delay / 2)
Interrupt()
}()
start := Now()
Sleep(delay)
delayadj := delay
if runtime.GOOS == "windows" {
delayadj -= windowsInaccuracy
}
duration := Now().Sub(start)
if duration < delayadj {
t.Fatalf("Sleep(%s) slept for only %s", delay, duration)
}
}
// Test the basic function calling behavior. Correct queueing
// behavior is tested elsewhere, since After and AfterFunc share
// the same code.
func TestAfterFunc(t *testing.T) {
i := 10
c := make(chan bool)
var f func()
f = func() {
i--
if i >= 0 {
AfterFunc(0, f)
Sleep(1 * Second)
} else {
c <- true
}
}
AfterFunc(0, f)
<-c
}
func TestAfterStress(t *testing.T) {
stop := uint32(0)
go func() {
for atomic.LoadUint32(&stop) == 0 {
runtime.GC()
// Yield so that the OS can wake up the timer thread,
// so that it can generate channel sends for the main goroutine,
// which will eventually set stop = 1 for us.
Sleep(Nanosecond)
}
}()
ticker := NewTicker(1)
for i := 0; i < 100; i++ {
<-ticker.C
}
ticker.Stop()
atomic.StoreUint32(&stop, 1)
}
func benchmark(b *testing.B, bench func(n int)) {
garbage := make([]*Timer, 1<<17)
for i := 0; i < len(garbage); i++ {
garbage[i] = AfterFunc(Hour, nil)
}
b.ResetTimer()
b.RunParallel(func(pb *testing.PB) {
for pb.Next() {
bench(1000)
}
})
b.StopTimer()
for i := 0; i < len(garbage); i++ {
garbage[i].Stop()
}
}
func BenchmarkAfterFunc(b *testing.B) {
benchmark(b, func(n int) {
c := make(chan bool)
var f func()
f = func() {
n--
if n >= 0 {
AfterFunc(0, f)
} else {
c <- true
}
}
AfterFunc(0, f)
<-c
})
}
func BenchmarkAfter(b *testing.B) {
benchmark(b, func(n int) {
for i := 0; i < n; i++ {
<-After(1)
}
})
}
func BenchmarkStop(b *testing.B) {
benchmark(b, func(n int) {
for i := 0; i < n; i++ {
NewTimer(1 * Second).Stop()
}
})
}
func BenchmarkSimultaneousAfterFunc(b *testing.B) {
benchmark(b, func(n int) {
var wg sync.WaitGroup
wg.Add(n)
for i := 0; i < n; i++ {
AfterFunc(0, wg.Done)
}
wg.Wait()
})
}
func BenchmarkStartStop(b *testing.B) {
benchmark(b, func(n int) {
timers := make([]*Timer, n)
for i := 0; i < n; i++ {
timers[i] = AfterFunc(Hour, nil)
}
for i := 0; i < n; i++ {
timers[i].Stop()
}
})
}
func TestAfter(t *testing.T) {
const delay = 100 * Millisecond
start := Now()
end := <-After(delay)
delayadj := delay
if runtime.GOOS == "windows" {
delayadj -= windowsInaccuracy
}
if duration := Now().Sub(start); duration < delayadj {
t.Fatalf("After(%s) slept for only %d ns", delay, duration)
}
if min := start.Add(delayadj); end.Before(min) {
t.Fatalf("After(%s) expect >= %s, got %s", delay, min, end)
}
}
func TestAfterTick(t *testing.T) {
const Count = 10
Delta := 100 * Millisecond
if testing.Short() {
Delta = 10 * Millisecond
}
t0 := Now()
for i := 0; i < Count; i++ {
<-After(Delta)
}
t1 := Now()
d := t1.Sub(t0)
target := Delta * Count
if d < target*9/10 {
t.Fatalf("%d ticks of %s too fast: took %s, expected %s", Count, Delta, d, target)
}
if !testing.Short() && d > target*30/10 {
t.Fatalf("%d ticks of %s too slow: took %s, expected %s", Count, Delta, d, target)
}
}
func TestAfterStop(t *testing.T) {
AfterFunc(100*Millisecond, func() {})
t0 := NewTimer(50 * Millisecond)
c1 := make(chan bool, 1)
t1 := AfterFunc(150*Millisecond, func() { c1 <- true })
c2 := After(200 * Millisecond)
if !t0.Stop() {
t.Fatalf("failed to stop event 0")
}
if !t1.Stop() {
t.Fatalf("failed to stop event 1")
}
<-c2
select {
case <-t0.C:
t.Fatalf("event 0 was not stopped")
case <-c1:
t.Fatalf("event 1 was not stopped")
default:
}
if t1.Stop() {
t.Fatalf("Stop returned true twice")
}
}
func TestAfterQueuing(t *testing.T) {
// This test flakes out on some systems,
// so we'll try it a few times before declaring it a failure.
const attempts = 3
err := errors.New("!=nil")
for i := 0; i < attempts && err != nil; i++ {
if err = testAfterQueuing(t); err != nil {
t.Logf("attempt %v failed: %v", i, err)
}
}
if err != nil {
t.Fatal(err)
}
}
var slots = []int{5, 3, 6, 6, 6, 1, 1, 2, 7, 9, 4, 8, 0}
type afterResult struct {
slot int
t Time
}
func await(slot int, result chan<- afterResult, ac <-chan Time) {
result <- afterResult{slot, <-ac}
}
func testAfterQueuing(t *testing.T) error {
Delta := 100 * Millisecond
if testing.Short() {
Delta = 20 * Millisecond
}
// make the result channel buffered because we don't want
// to depend on channel queueing semantics that might
// possibly change in the future.
result := make(chan afterResult, len(slots))
t0 := Now()
for _, slot := range slots {
go await(slot, result, After(Duration(slot)*Delta))
}
sort.Ints(slots)
for _, slot := range slots {
r := <-result
if r.slot != slot {
return fmt.Errorf("after slot %d, expected %d", r.slot, slot)
}
dt := r.t.Sub(t0)
target := Duration(slot) * Delta
if dt < target-Delta/2 || dt > target+Delta*10 {
return fmt.Errorf("After(%s) arrived at %s, expected [%s,%s]", target, dt, target-Delta/2, target+Delta*10)
}
}
return nil
}
func TestTimerStopStress(t *testing.T) {
if testing.Short() {
return
}
for i := 0; i < 100; i++ {
go func(i int) {
timer := AfterFunc(2*Second, func() {
t.Fatalf("timer %d was not stopped", i)
})
Sleep(1 * Second)
timer.Stop()
}(i)
}
Sleep(3 * Second)
}
func TestSleepZeroDeadlock(t *testing.T) {
// Sleep(0) used to hang, the sequence of events was as follows.
// Sleep(0) sets G's status to Gwaiting, but then immediately returns leaving the status.
// Then the goroutine calls e.g. new and falls down into the scheduler due to pending GC.
// After the GC nobody wakes up the goroutine from Gwaiting status.
defer runtime.GOMAXPROCS(runtime.GOMAXPROCS(4))
c := make(chan bool)
go func() {
for i := 0; i < 100; i++ {
runtime.GC()
}
c <- true
}()
for i := 0; i < 100; i++ {
Sleep(0)
tmp := make(chan bool, 1)
tmp <- true
<-tmp
}
<-c
}
func testReset(d Duration) error {
t0 := NewTimer(2 * d)
Sleep(d)
if t0.Reset(3*d) != true {
return errors.New("resetting unfired timer returned false")
}
Sleep(2 * d)
select {
case <-t0.C:
return errors.New("timer fired early")
default:
}
Sleep(2 * d)
select {
case <-t0.C:
default:
return errors.New("reset timer did not fire")
}
if t0.Reset(50*Millisecond) != false {
return errors.New("resetting expired timer returned true")
}
return nil
}
func TestReset(t *testing.T) {
// We try to run this test with increasingly larger multiples
// until one works so slow, loaded hardware isn't as flaky,
// but without slowing down fast machines unnecessarily.
const unit = 25 * Millisecond
tries := []Duration{
1 * unit,
3 * unit,
7 * unit,
15 * unit,
}
var err error
for _, d := range tries {
err = testReset(d)
if err == nil {
t.Logf("passed using duration %v", d)
return
}
}
t.Error(err)
}
// Test that sleeping for an interval so large it overflows does not
// result in a short sleep duration.
func TestOverflowSleep(t *testing.T) {
const big = Duration(int64(1<<63 - 1))
select {
case <-After(big):
t.Fatalf("big timeout fired")
case <-After(25 * Millisecond):
// OK
}
const neg = Duration(-1 << 63)
select {
case <-After(neg):
// OK
case <-After(1 * Second):
t.Fatalf("negative timeout didn't fire")
}
}
// Test that a panic while deleting a timer does not leave
// the timers mutex held, deadlocking a ticker.Stop in a defer.
func TestIssue5745(t *testing.T) {
ticker := NewTicker(Hour)
defer func() {
// would deadlock here before the fix due to
// lock taken before the segfault.
ticker.Stop()
if r := recover(); r == nil {
t.Error("Expected panic, but none happened.")
}
}()
// cause a panic due to a segfault
var timer *Timer
timer.Stop()
t.Error("Should be unreachable.")
}
func TestOverflowRuntimeTimer(t *testing.T) {
if testing.Short() {
t.Skip("skipping in short mode, see issue 6874")
}
// This may hang forever if timers are broken. See comment near
// the end of CheckRuntimeTimerOverflow in internal_test.go.
CheckRuntimeTimerOverflow()
}
func checkZeroPanicString(t *testing.T) {
e := recover()
s, _ := e.(string)
if want := "called on uninitialized Timer"; !strings.Contains(s, want) {
t.Errorf("panic = %v; want substring %q", e, want)
}
}
func TestZeroTimerResetPanics(t *testing.T) {
defer checkZeroPanicString(t)
var tr Timer
tr.Reset(1)
}
func TestZeroTimerStopPanics(t *testing.T) {
defer checkZeroPanicString(t)
var tr Timer
tr.Stop()
}