blob: 2f7d3637e5a85329e97474310e34c54f25053ead [file] [log] [blame]
// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Package base32 implements base32 encoding as specified by RFC 4648.
package base32
import (
"io"
"strconv"
)
/*
* Encodings
*/
// An Encoding is a radix 32 encoding/decoding scheme, defined by a
// 32-character alphabet. The most common is the "base32" encoding
// introduced for SASL GSSAPI and standardized in RFC 4648.
// The alternate "base32hex" encoding is used in DNSSEC.
type Encoding struct {
encode [32]byte
decodeMap [256]byte
padChar rune
}
const (
StdPadding rune = '=' // Standard padding character
NoPadding rune = -1 // No padding
)
const encodeStd = "ABCDEFGHIJKLMNOPQRSTUVWXYZ234567"
const encodeHex = "0123456789ABCDEFGHIJKLMNOPQRSTUV"
// NewEncoding returns a new Encoding defined by the given alphabet,
// which must be a 32-byte string.
func NewEncoding(encoder string) *Encoding {
if len(encoder) != 32 {
panic("encoding alphabet is not 32-bytes long")
}
e := new(Encoding)
copy(e.encode[:], encoder)
e.padChar = StdPadding
for i := 0; i < len(e.decodeMap); i++ {
e.decodeMap[i] = 0xFF
}
for i := 0; i < len(encoder); i++ {
e.decodeMap[encoder[i]] = byte(i)
}
return e
}
// StdEncoding is the standard base32 encoding, as defined in
// RFC 4648.
var StdEncoding = NewEncoding(encodeStd)
// HexEncoding is the ``Extended Hex Alphabet'' defined in RFC 4648.
// It is typically used in DNS.
var HexEncoding = NewEncoding(encodeHex)
// WithPadding creates a new encoding identical to enc except
// with a specified padding character, or NoPadding to disable padding.
// The padding character must not be '\r' or '\n', must not
// be contained in the encoding's alphabet and must be a rune equal or
// below '\xff'.
func (enc Encoding) WithPadding(padding rune) *Encoding {
if padding == '\r' || padding == '\n' || padding > 0xff {
panic("invalid padding")
}
for i := 0; i < len(enc.encode); i++ {
if rune(enc.encode[i]) == padding {
panic("padding contained in alphabet")
}
}
enc.padChar = padding
return &enc
}
/*
* Encoder
*/
// Encode encodes src using the encoding enc, writing
// EncodedLen(len(src)) bytes to dst.
//
// The encoding pads the output to a multiple of 8 bytes,
// so Encode is not appropriate for use on individual blocks
// of a large data stream. Use NewEncoder() instead.
func (enc *Encoding) Encode(dst, src []byte) {
for len(src) > 0 {
var b [8]byte
// Unpack 8x 5-bit source blocks into a 5 byte
// destination quantum
switch len(src) {
default:
b[7] = src[4] & 0x1F
b[6] = src[4] >> 5
fallthrough
case 4:
b[6] |= (src[3] << 3) & 0x1F
b[5] = (src[3] >> 2) & 0x1F
b[4] = src[3] >> 7
fallthrough
case 3:
b[4] |= (src[2] << 1) & 0x1F
b[3] = (src[2] >> 4) & 0x1F
fallthrough
case 2:
b[3] |= (src[1] << 4) & 0x1F
b[2] = (src[1] >> 1) & 0x1F
b[1] = (src[1] >> 6) & 0x1F
fallthrough
case 1:
b[1] |= (src[0] << 2) & 0x1F
b[0] = src[0] >> 3
}
// Encode 5-bit blocks using the base32 alphabet
size := len(dst)
if size >= 8 {
// Common case, unrolled for extra performance
dst[0] = enc.encode[b[0]&31]
dst[1] = enc.encode[b[1]&31]
dst[2] = enc.encode[b[2]&31]
dst[3] = enc.encode[b[3]&31]
dst[4] = enc.encode[b[4]&31]
dst[5] = enc.encode[b[5]&31]
dst[6] = enc.encode[b[6]&31]
dst[7] = enc.encode[b[7]&31]
} else {
for i := 0; i < size; i++ {
dst[i] = enc.encode[b[i]&31]
}
}
// Pad the final quantum
if len(src) < 5 {
if enc.padChar == NoPadding {
break
}
dst[7] = byte(enc.padChar)
if len(src) < 4 {
dst[6] = byte(enc.padChar)
dst[5] = byte(enc.padChar)
if len(src) < 3 {
dst[4] = byte(enc.padChar)
if len(src) < 2 {
dst[3] = byte(enc.padChar)
dst[2] = byte(enc.padChar)
}
}
}
break
}
src = src[5:]
dst = dst[8:]
}
}
// EncodeToString returns the base32 encoding of src.
func (enc *Encoding) EncodeToString(src []byte) string {
buf := make([]byte, enc.EncodedLen(len(src)))
enc.Encode(buf, src)
return string(buf)
}
type encoder struct {
err error
enc *Encoding
w io.Writer
buf [5]byte // buffered data waiting to be encoded
nbuf int // number of bytes in buf
out [1024]byte // output buffer
}
func (e *encoder) Write(p []byte) (n int, err error) {
if e.err != nil {
return 0, e.err
}
// Leading fringe.
if e.nbuf > 0 {
var i int
for i = 0; i < len(p) && e.nbuf < 5; i++ {
e.buf[e.nbuf] = p[i]
e.nbuf++
}
n += i
p = p[i:]
if e.nbuf < 5 {
return
}
e.enc.Encode(e.out[0:], e.buf[0:])
if _, e.err = e.w.Write(e.out[0:8]); e.err != nil {
return n, e.err
}
e.nbuf = 0
}
// Large interior chunks.
for len(p) >= 5 {
nn := len(e.out) / 8 * 5
if nn > len(p) {
nn = len(p)
nn -= nn % 5
}
e.enc.Encode(e.out[0:], p[0:nn])
if _, e.err = e.w.Write(e.out[0 : nn/5*8]); e.err != nil {
return n, e.err
}
n += nn
p = p[nn:]
}
// Trailing fringe.
for i := 0; i < len(p); i++ {
e.buf[i] = p[i]
}
e.nbuf = len(p)
n += len(p)
return
}
// Close flushes any pending output from the encoder.
// It is an error to call Write after calling Close.
func (e *encoder) Close() error {
// If there's anything left in the buffer, flush it out
if e.err == nil && e.nbuf > 0 {
e.enc.Encode(e.out[0:], e.buf[0:e.nbuf])
encodedLen := e.enc.EncodedLen(e.nbuf)
e.nbuf = 0
_, e.err = e.w.Write(e.out[0:encodedLen])
}
return e.err
}
// NewEncoder returns a new base32 stream encoder. Data written to
// the returned writer will be encoded using enc and then written to w.
// Base32 encodings operate in 5-byte blocks; when finished
// writing, the caller must Close the returned encoder to flush any
// partially written blocks.
func NewEncoder(enc *Encoding, w io.Writer) io.WriteCloser {
return &encoder{enc: enc, w: w}
}
// EncodedLen returns the length in bytes of the base32 encoding
// of an input buffer of length n.
func (enc *Encoding) EncodedLen(n int) int {
if enc.padChar == NoPadding {
return (n*8 + 4) / 5
}
return (n + 4) / 5 * 8
}
/*
* Decoder
*/
type CorruptInputError int64
func (e CorruptInputError) Error() string {
return "illegal base32 data at input byte " + strconv.FormatInt(int64(e), 10)
}
// decode is like Decode but returns an additional 'end' value, which
// indicates if end-of-message padding was encountered and thus any
// additional data is an error. This method assumes that src has been
// stripped of all supported whitespace ('\r' and '\n').
func (enc *Encoding) decode(dst, src []byte) (n int, end bool, err error) {
// Lift the nil check outside of the loop.
_ = enc.decodeMap
dsti := 0
olen := len(src)
for len(src) > 0 && !end {
// Decode quantum using the base32 alphabet
var dbuf [8]byte
dlen := 8
for j := 0; j < 8; {
if len(src) == 0 {
if enc.padChar != NoPadding {
// We have reached the end and are missing padding
return n, false, CorruptInputError(olen - len(src) - j)
}
// We have reached the end and are not expecting any padding
dlen, end = j, true
break
}
in := src[0]
src = src[1:]
if in == byte(enc.padChar) && j >= 2 && len(src) < 8 {
// We've reached the end and there's padding
if len(src)+j < 8-1 {
// not enough padding
return n, false, CorruptInputError(olen)
}
for k := 0; k < 8-1-j; k++ {
if len(src) > k && src[k] != byte(enc.padChar) {
// incorrect padding
return n, false, CorruptInputError(olen - len(src) + k - 1)
}
}
dlen, end = j, true
// 7, 5 and 2 are not valid padding lengths, and so 1, 3 and 6 are not
// valid dlen values. See RFC 4648 Section 6 "Base 32 Encoding" listing
// the five valid padding lengths, and Section 9 "Illustrations and
// Examples" for an illustration for how the 1st, 3rd and 6th base32
// src bytes do not yield enough information to decode a dst byte.
if dlen == 1 || dlen == 3 || dlen == 6 {
return n, false, CorruptInputError(olen - len(src) - 1)
}
break
}
dbuf[j] = enc.decodeMap[in]
if dbuf[j] == 0xFF {
return n, false, CorruptInputError(olen - len(src) - 1)
}
j++
}
// Pack 8x 5-bit source blocks into 5 byte destination
// quantum
switch dlen {
case 8:
dst[dsti+4] = dbuf[6]<<5 | dbuf[7]
n++
fallthrough
case 7:
dst[dsti+3] = dbuf[4]<<7 | dbuf[5]<<2 | dbuf[6]>>3
n++
fallthrough
case 5:
dst[dsti+2] = dbuf[3]<<4 | dbuf[4]>>1
n++
fallthrough
case 4:
dst[dsti+1] = dbuf[1]<<6 | dbuf[2]<<1 | dbuf[3]>>4
n++
fallthrough
case 2:
dst[dsti+0] = dbuf[0]<<3 | dbuf[1]>>2
n++
}
dsti += 5
}
return n, end, nil
}
// Decode decodes src using the encoding enc. It writes at most
// DecodedLen(len(src)) bytes to dst and returns the number of bytes
// written. If src contains invalid base32 data, it will return the
// number of bytes successfully written and CorruptInputError.
// New line characters (\r and \n) are ignored.
func (enc *Encoding) Decode(dst, src []byte) (n int, err error) {
buf := make([]byte, len(src))
l := stripNewlines(buf, src)
n, _, err = enc.decode(dst, buf[:l])
return
}
// DecodeString returns the bytes represented by the base32 string s.
func (enc *Encoding) DecodeString(s string) ([]byte, error) {
buf := []byte(s)
l := stripNewlines(buf, buf)
n, _, err := enc.decode(buf, buf[:l])
return buf[:n], err
}
type decoder struct {
err error
enc *Encoding
r io.Reader
end bool // saw end of message
buf [1024]byte // leftover input
nbuf int
out []byte // leftover decoded output
outbuf [1024 / 8 * 5]byte
}
func readEncodedData(r io.Reader, buf []byte, min int, expectsPadding bool) (n int, err error) {
for n < min && err == nil {
var nn int
nn, err = r.Read(buf[n:])
n += nn
}
// data was read, less than min bytes could be read
if n < min && n > 0 && err == io.EOF {
err = io.ErrUnexpectedEOF
}
// no data was read, the buffer already contains some data
// when padding is disabled this is not an error, as the message can be of
// any length
if expectsPadding && min < 8 && n == 0 && err == io.EOF {
err = io.ErrUnexpectedEOF
}
return
}
func (d *decoder) Read(p []byte) (n int, err error) {
// Use leftover decoded output from last read.
if len(d.out) > 0 {
n = copy(p, d.out)
d.out = d.out[n:]
if len(d.out) == 0 {
return n, d.err
}
return n, nil
}
if d.err != nil {
return 0, d.err
}
// Read a chunk.
nn := len(p) / 5 * 8
if nn < 8 {
nn = 8
}
if nn > len(d.buf) {
nn = len(d.buf)
}
// Minimum amount of bytes that needs to be read each cycle
var min int
var expectsPadding bool
if d.enc.padChar == NoPadding {
min = 1
expectsPadding = false
} else {
min = 8 - d.nbuf
expectsPadding = true
}
nn, d.err = readEncodedData(d.r, d.buf[d.nbuf:nn], min, expectsPadding)
d.nbuf += nn
if d.nbuf < min {
return 0, d.err
}
// Decode chunk into p, or d.out and then p if p is too small.
var nr int
if d.enc.padChar == NoPadding {
nr = d.nbuf
} else {
nr = d.nbuf / 8 * 8
}
nw := d.enc.DecodedLen(d.nbuf)
if nw > len(p) {
nw, d.end, err = d.enc.decode(d.outbuf[0:], d.buf[0:nr])
d.out = d.outbuf[0:nw]
n = copy(p, d.out)
d.out = d.out[n:]
} else {
n, d.end, err = d.enc.decode(p, d.buf[0:nr])
}
d.nbuf -= nr
for i := 0; i < d.nbuf; i++ {
d.buf[i] = d.buf[i+nr]
}
if err != nil && (d.err == nil || d.err == io.EOF) {
d.err = err
}
if len(d.out) > 0 {
// We cannot return all the decoded bytes to the caller in this
// invocation of Read, so we return a nil error to ensure that Read
// will be called again. The error stored in d.err, if any, will be
// returned with the last set of decoded bytes.
return n, nil
}
return n, d.err
}
type newlineFilteringReader struct {
wrapped io.Reader
}
// stripNewlines removes newline characters and returns the number
// of non-newline characters copied to dst.
func stripNewlines(dst, src []byte) int {
offset := 0
for _, b := range src {
if b == '\r' || b == '\n' {
continue
}
dst[offset] = b
offset++
}
return offset
}
func (r *newlineFilteringReader) Read(p []byte) (int, error) {
n, err := r.wrapped.Read(p)
for n > 0 {
s := p[0:n]
offset := stripNewlines(s, s)
if err != nil || offset > 0 {
return offset, err
}
// Previous buffer entirely whitespace, read again
n, err = r.wrapped.Read(p)
}
return n, err
}
// NewDecoder constructs a new base32 stream decoder.
func NewDecoder(enc *Encoding, r io.Reader) io.Reader {
return &decoder{enc: enc, r: &newlineFilteringReader{r}}
}
// DecodedLen returns the maximum length in bytes of the decoded data
// corresponding to n bytes of base32-encoded data.
func (enc *Encoding) DecodedLen(n int) int {
if enc.padChar == NoPadding {
return n * 5 / 8
}
return n / 8 * 5
}