// Copyright 2017 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

package ld

import (
	"cmd/internal/sys"
	"cmd/link/internal/loader"
	"encoding/binary"
	"errors"
	"log"
	"os"
)

// If fallocate is not supported on this platform, return this error.
// Note this is the same error returned by filesystems that don't support
// fallocate, and that is intentional. The error is ignored where needed, and
// OutBuf writes to heap memory.
const fallocateNotSupportedErr = "operation not supported"
const outbufMode = 0775

// OutBuf is a buffered file writer.
//
// It is simlar to the Writer in cmd/internal/bio with a few small differences.
//
// First, it tracks the output architecture and uses it to provide
// endian helpers.
//
// Second, it provides a very cheap offset counter that doesn't require
// any system calls to read the value.
//
// Third, it also mmaps the output file (if available). The intended usage is:
// - Mmap the output file
// - Write the content
// - possibly apply any edits in the output buffer
// - possibly write more content to the file. These writes take place in a heap
//   backed buffer that will get synced to disk.
// - Munmap the output file
//
// And finally, it provides a mechanism by which you can multithread the
// writing of output files. This mechanism is accomplished by copying a OutBuf,
// and using it in the thread/goroutine.
//
// Parallel OutBuf is intended to be used like:
//
//  func write(out *OutBuf) {
//    var wg sync.WaitGroup
//    for i := 0; i < 10; i++ {
//      wg.Add(1)
//      view, err := out.View(start[i])
//      if err != nil {
//         // handle output
//         continue
//      }
//      go func(out *OutBuf, i int) {
//        // do output
//        wg.Done()
//      }(view, i)
//    }
//    wg.Wait()
//  }
type OutBuf struct {
	arch *sys.Arch
	off  int64

	buf  []byte // backing store of mmap'd output file
	heap []byte // backing store for non-mmapped data

	name   string
	f      *os.File
	encbuf [8]byte // temp buffer used by WriteN methods
	isView bool    // true if created from View()
}

func (out *OutBuf) Open(name string) error {
	if out.f != nil {
		return errors.New("cannot open more than one file")
	}
	f, err := os.OpenFile(name, os.O_RDWR|os.O_CREATE|os.O_TRUNC, outbufMode)
	if err != nil {
		return err
	}
	out.off = 0
	out.name = name
	out.f = f
	return nil
}

func NewOutBuf(arch *sys.Arch) *OutBuf {
	return &OutBuf{
		arch: arch,
	}
}

var viewError = errors.New("output not mmapped")

func (out *OutBuf) View(start uint64) (*OutBuf, error) {
	return &OutBuf{
		arch:   out.arch,
		name:   out.name,
		buf:    out.buf,
		heap:   out.heap,
		off:    int64(start),
		isView: true,
	}, nil
}

var viewCloseError = errors.New("cannot Close OutBuf from View")

func (out *OutBuf) Close() error {
	if out.isView {
		return viewCloseError
	}
	if out.isMmapped() {
		out.copyHeap()
		out.munmap()
	}
	if out.f == nil {
		return nil
	}
	if len(out.heap) != 0 {
		if _, err := out.f.Write(out.heap); err != nil {
			return err
		}
	}
	if err := out.f.Close(); err != nil {
		return err
	}
	out.f = nil
	return nil
}

// isMmapped returns true if the OutBuf is mmaped.
func (out *OutBuf) isMmapped() bool {
	return len(out.buf) != 0
}

// copyHeap copies the heap to the mmapped section of memory, returning true if
// a copy takes place.
func (out *OutBuf) copyHeap() bool {
	if !out.isMmapped() { // only valuable for mmapped OutBufs.
		return false
	}
	if out.isView {
		panic("can't copyHeap a view")
	}

	bufLen := len(out.buf)
	heapLen := len(out.heap)
	total := uint64(bufLen + heapLen)
	out.munmap()
	if heapLen != 0 {
		if err := out.Mmap(total); err != nil {
			panic(err)
		}
		copy(out.buf[bufLen:], out.heap[:heapLen])
		out.heap = out.heap[:0]
	}
	return true
}

// maxOutBufHeapLen limits the growth of the heap area.
const maxOutBufHeapLen = 10 << 20

// writeLoc determines the write location if a buffer is mmaped.
// We maintain two write buffers, an mmapped section, and a heap section for
// writing. When the mmapped section is full, we switch over the heap memory
// for writing.
func (out *OutBuf) writeLoc(lenToWrite int64) (int64, []byte) {
	// See if we have enough space in the mmaped area.
	bufLen := int64(len(out.buf))
	if out.off+lenToWrite <= bufLen {
		return out.off, out.buf
	}

	// Not enough space in the mmaped area, write to heap area instead.
	heapPos := out.off - bufLen
	heapLen := int64(len(out.heap))
	lenNeeded := heapPos + lenToWrite
	if lenNeeded > heapLen { // do we need to grow the heap storage?
		// The heap variables aren't protected by a mutex. For now, just bomb if you
		// try to use OutBuf in parallel. (Note this probably could be fixed.)
		if out.isView {
			panic("cannot write to heap in parallel")
		}
		// See if our heap would grow to be too large, and if so, copy it to the end
		// of the mmapped area.
		if heapLen > maxOutBufHeapLen && out.copyHeap() {
			heapPos -= heapLen
			lenNeeded = heapPos + lenToWrite
			heapLen = 0
		}
		out.heap = append(out.heap, make([]byte, lenNeeded-heapLen)...)
	}
	return heapPos, out.heap
}

func (out *OutBuf) SeekSet(p int64) {
	out.off = p
}

func (out *OutBuf) Offset() int64 {
	return out.off
}

// Write writes the contents of v to the buffer.
func (out *OutBuf) Write(v []byte) (int, error) {
	n := len(v)
	pos, buf := out.writeLoc(int64(n))
	copy(buf[pos:], v)
	out.off += int64(n)
	return n, nil
}

func (out *OutBuf) Write8(v uint8) {
	pos, buf := out.writeLoc(1)
	buf[pos] = v
	out.off++
}

// WriteByte is an alias for Write8 to fulfill the io.ByteWriter interface.
func (out *OutBuf) WriteByte(v byte) error {
	out.Write8(v)
	return nil
}

func (out *OutBuf) Write16(v uint16) {
	out.arch.ByteOrder.PutUint16(out.encbuf[:], v)
	out.Write(out.encbuf[:2])
}

func (out *OutBuf) Write32(v uint32) {
	out.arch.ByteOrder.PutUint32(out.encbuf[:], v)
	out.Write(out.encbuf[:4])
}

func (out *OutBuf) Write32b(v uint32) {
	binary.BigEndian.PutUint32(out.encbuf[:], v)
	out.Write(out.encbuf[:4])
}

func (out *OutBuf) Write64(v uint64) {
	out.arch.ByteOrder.PutUint64(out.encbuf[:], v)
	out.Write(out.encbuf[:8])
}

func (out *OutBuf) Write64b(v uint64) {
	binary.BigEndian.PutUint64(out.encbuf[:], v)
	out.Write(out.encbuf[:8])
}

func (out *OutBuf) WriteString(s string) {
	pos, buf := out.writeLoc(int64(len(s)))
	n := copy(buf[pos:], s)
	if n != len(s) {
		log.Fatalf("WriteString truncated. buffer size: %d, offset: %d, len(s)=%d", len(out.buf), out.off, len(s))
	}
	out.off += int64(n)
}

// WriteStringN writes the first n bytes of s.
// If n is larger than len(s) then it is padded with zero bytes.
func (out *OutBuf) WriteStringN(s string, n int) {
	out.WriteStringPad(s, n, zeros[:])
}

// WriteStringPad writes the first n bytes of s.
// If n is larger than len(s) then it is padded with the bytes in pad (repeated as needed).
func (out *OutBuf) WriteStringPad(s string, n int, pad []byte) {
	if len(s) >= n {
		out.WriteString(s[:n])
	} else {
		out.WriteString(s)
		n -= len(s)
		for n > len(pad) {
			out.Write(pad)
			n -= len(pad)

		}
		out.Write(pad[:n])
	}
}

// WriteSym writes the content of a Symbol, then changes the Symbol's content
// to point to the output buffer that we just wrote, so we can apply further
// edit to the symbol content.
// If the output file is not Mmap'd, just writes the content.
func (out *OutBuf) WriteSym(ldr *loader.Loader, s loader.Sym) {
	P := ldr.Data(s)
	n := int64(len(P))
	pos, buf := out.writeLoc(n)
	copy(buf[pos:], P)
	out.off += n
	ldr.SetOutData(s, buf[pos:pos+n])
}